drivers/acpi/acpica/utaddress.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utaddress - op_region address range check
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2012, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47
  48 #define _COMPONENT          ACPI_UTILITIES
  49 ACPI_MODULE_NAME("utaddress")
  50
  51 /*******************************************************************************
  52  *
  53  * FUNCTION:    acpi_ut_add_address_range
  54  *
  55  * PARAMETERS:  space_id            - Address space ID
  56  *              Address             - op_region start address
  57  *              Length              - op_region length
  58  *              region_node         - op_region namespace node
  59  *
  60  * RETURN:      Status
  61  *
  62  * DESCRIPTION: Add the Operation Region address range to the global list.
  63  *              The only supported Space IDs are Memory and I/O. Called when
  64  *              the op_region address/length operands are fully evaluated.
  65  *
  66  * MUTEX:       Locks the namespace
  67  *
  68  * NOTE: Because this interface is only called when an op_region argument
  69  * list is evaluated, there cannot be any duplicate region_nodes.
  70  * Duplicate Address/Length values are allowed, however, so that multiple
  71  * address conflicts can be detected.
  72  *
  73  ******************************************************************************/
  74 acpi_status
  75 acpi_ut_add_address_range(acpi_adr_space_type space_id,
  76                           acpi_physical_address address,
  77                           u32 length, struct acpi_namespace_node *region_node)
  78 {
  79         struct acpi_address_range *range_info;
  80         acpi_status status;
  81
  82         ACPI_FUNCTION_TRACE(ut_add_address_range);
  83
  84         if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
  85             (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
  86                 return_ACPI_STATUS(AE_OK);
  87         }
  88
  89         /* Allocate/init a new info block, add it to the appropriate list */
  90
  91         range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range));
  92         if (!range_info) {
  93                 return_ACPI_STATUS(AE_NO_MEMORY);
  94         }
  95
  96         range_info->start_address = address;
  97         range_info->end_address = (address + length - 1);
  98         range_info->region_node = region_node;
  99
 100         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 101         if (ACPI_FAILURE(status)) {
 102                 ACPI_FREE(range_info);
 103                 return_ACPI_STATUS(status);
 104         }
 105
 106         range_info->next = acpi_gbl_address_range_list[space_id];
 107         acpi_gbl_address_range_list[space_id] = range_info;
 108
 109         ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 110                           "\nAdded [%4.4s] address range: 0x%p-0x%p\n",
 111                           acpi_ut_get_node_name(range_info->region_node),
 112                           ACPI_CAST_PTR(void, address),
 113                           ACPI_CAST_PTR(void, range_info->end_address)));
 114
 115         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 116         return_ACPI_STATUS(AE_OK);
 117 }
 118
 119 /*******************************************************************************
 120  *
 121  * FUNCTION:    acpi_ut_remove_address_range
 122  *
 123  * PARAMETERS:  space_id            - Address space ID
 124  *              region_node         - op_region namespace node
 125  *
 126  * RETURN:      None
 127  *
 128  * DESCRIPTION: Remove the Operation Region from the global list. The only
 129  *              supported Space IDs are Memory and I/O. Called when an
 130  *              op_region is deleted.
 131  *
 132  * MUTEX:       Assumes the namespace is locked
 133  *
 134  ******************************************************************************/
 135
 136 void
 137 acpi_ut_remove_address_range(acpi_adr_space_type space_id,
 138                              struct acpi_namespace_node *region_node)
 139 {
 140         struct acpi_address_range *range_info;
 141         struct acpi_address_range *prev;
 142
 143         ACPI_FUNCTION_TRACE(ut_remove_address_range);
 144
 145         if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
 146             (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
 147                 return_VOID;
 148         }
 149
 150         /* Get the appropriate list head and check the list */
 151
 152         range_info = prev = acpi_gbl_address_range_list[space_id];
 153         while (range_info) {
 154                 if (range_info->region_node == region_node) {
 155                         if (range_info == prev) {       /* Found at list head */
 156                                 acpi_gbl_address_range_list[space_id] =
 157                                     range_info->next;
 158                         } else {
 159                                 prev->next = range_info->next;
 160                         }
 161
 162                         ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 163                                           "\nRemoved [%4.4s] address range: 0x%p-0x%p\n",
 164                                           acpi_ut_get_node_name(range_info->
 165                                                                 region_node),
 166                                           ACPI_CAST_PTR(void,
 167                                                         range_info->
 168                                                         start_address),
 169                                           ACPI_CAST_PTR(void,
 170                                                         range_info->
 171                                                         end_address)));
 172
 173                         ACPI_FREE(range_info);
 174                         return_VOID;
 175                 }
 176
 177                 prev = range_info;
 178                 range_info = range_info->next;
 179         }
 180
 181         return_VOID;
 182 }
 183
 184 /*******************************************************************************
 185  *
 186  * FUNCTION:    acpi_ut_check_address_range
 187  *
 188  * PARAMETERS:  space_id            - Address space ID
 189  *              Address             - Start address
 190  *              Length              - Length of address range
 191  *              Warn                - TRUE if warning on overlap desired
 192  *
 193  * RETURN:      Count of the number of conflicts detected. Zero is always
 194  *              returned for Space IDs other than Memory or I/O.
 195  *
 196  * DESCRIPTION: Check if the input address range overlaps any of the
 197  *              ASL operation region address ranges. The only supported
 198  *              Space IDs are Memory and I/O.
 199  *
 200  * MUTEX:       Assumes the namespace is locked.
 201  *
 202  ******************************************************************************/
 203
 204 u32
 205 acpi_ut_check_address_range(acpi_adr_space_type space_id,
 206                             acpi_physical_address address, u32 length, u8 warn)
 207 {
 208         struct acpi_address_range *range_info;
 209         acpi_physical_address end_address;
 210         char *pathname;
 211         u32 overlap_count = 0;
 212
 213         ACPI_FUNCTION_TRACE(ut_check_address_range);
 214
 215         if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
 216             (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
 217                 return_UINT32(0);
 218         }
 219
 220         range_info = acpi_gbl_address_range_list[space_id];
 221         end_address = address + length - 1;
 222
 223         /* Check entire list for all possible conflicts */
 224
 225         while (range_info) {
 226                 /*
 227                  * Check if the requested Address/Length overlaps this address_range.
 228                  * Four cases to consider:
 229                  *
 230                  * 1) Input address/length is contained completely in the address range
 231                  * 2) Input address/length overlaps range at the range start
 232                  * 3) Input address/length overlaps range at the range end
 233                  * 4) Input address/length completely encompasses the range
 234                  */
 235                 if ((address <= range_info->end_address) &&
 236                     (end_address >= range_info->start_address)) {
 237
 238                         /* Found an address range overlap */
 239
 240                         overlap_count++;
 241                         if (warn) {     /* Optional warning message */
 242                                 pathname =
 243                                     acpi_ns_get_external_pathname(range_info->
 244                                                                   region_node);
 245
 246                                 ACPI_WARNING((AE_INFO,
 247                                               "0x%p-0x%p %s conflicts with Region %s %d",
 248                                               ACPI_CAST_PTR(void, address),
 249                                               ACPI_CAST_PTR(void, end_address),
 250                                               acpi_ut_get_region_name(space_id),
 251                                               pathname, overlap_count));
 252                                 ACPI_FREE(pathname);
 253                         }
 254                 }
 255
 256                 range_info = range_info->next;
 257         }
 258
 259         return_UINT32(overlap_count);
 260 }
 261
 262 /*******************************************************************************
 263  *
 264  * FUNCTION:    acpi_ut_delete_address_lists
 265  *
 266  * PARAMETERS:  None
 267  *
 268  * RETURN:      None
 269  *
 270  * DESCRIPTION: Delete all global address range lists (called during
 271  *              subsystem shutdown).
 272  *
 273  ******************************************************************************/
 274
 275 void acpi_ut_delete_address_lists(void)
 276 {
 277         struct acpi_address_range *next;
 278         struct acpi_address_range *range_info;
 279         int i;
 280
 281         /* Delete all elements in all address range lists */
 282
 283         for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) {
 284                 next = acpi_gbl_address_range_list[i];
 285
 286                 while (next) {
 287                         range_info = next;
 288                         next = range_info->next;
 289                         ACPI_FREE(range_info);
 290                 }
 291
 292                 acpi_gbl_address_range_list[i] = NULL;
 293         }
 294 }