md-cluster: Fix potential error pointer dereference in resize_bitmaps()
[linux/fpc-iii.git] / drivers / media / dvb-frontends / af9033.c
blob6a8d78b6edaceb5c2452bbecf0f11fa3ffe66849
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Afatech AF9033 demodulator driver
5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
6 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
7 */
9 #include "af9033_priv.h"
11 struct af9033_dev {
12 struct i2c_client *client;
13 struct regmap *regmap;
14 struct dvb_frontend fe;
15 struct af9033_config cfg;
16 bool is_af9035;
17 bool is_it9135;
19 u32 bandwidth_hz;
20 bool ts_mode_parallel;
21 bool ts_mode_serial;
23 enum fe_status fe_status;
24 u64 post_bit_error_prev; /* for old read_ber we return (curr - prev) */
25 u64 post_bit_error;
26 u64 post_bit_count;
27 u64 error_block_count;
28 u64 total_block_count;
31 /* Write reg val table using reg addr auto increment */
32 static int af9033_wr_reg_val_tab(struct af9033_dev *dev,
33 const struct reg_val *tab, int tab_len)
35 struct i2c_client *client = dev->client;
36 #define MAX_TAB_LEN 212
37 int ret, i, j;
38 u8 buf[1 + MAX_TAB_LEN];
40 dev_dbg(&client->dev, "tab_len=%d\n", tab_len);
42 if (tab_len > sizeof(buf)) {
43 dev_warn(&client->dev, "tab len %d is too big\n", tab_len);
44 return -EINVAL;
47 for (i = 0, j = 0; i < tab_len; i++) {
48 buf[j] = tab[i].val;
50 if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) {
51 ret = regmap_bulk_write(dev->regmap, tab[i].reg - j,
52 buf, j + 1);
53 if (ret)
54 goto err;
56 j = 0;
57 } else {
58 j++;
62 return 0;
63 err:
64 dev_dbg(&client->dev, "failed=%d\n", ret);
65 return ret;
68 static int af9033_init(struct dvb_frontend *fe)
70 struct af9033_dev *dev = fe->demodulator_priv;
71 struct i2c_client *client = dev->client;
72 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
73 int ret, i, len;
74 unsigned int utmp;
75 const struct reg_val *init;
76 u8 buf[4];
77 struct reg_val_mask tab[] = {
78 { 0x80fb24, 0x00, 0x08 },
79 { 0x80004c, 0x00, 0xff },
80 { 0x00f641, dev->cfg.tuner, 0xff },
81 { 0x80f5ca, 0x01, 0x01 },
82 { 0x80f715, 0x01, 0x01 },
83 { 0x00f41f, 0x04, 0x04 },
84 { 0x00f41a, 0x01, 0x01 },
85 { 0x80f731, 0x00, 0x01 },
86 { 0x00d91e, 0x00, 0x01 },
87 { 0x00d919, 0x00, 0x01 },
88 { 0x80f732, 0x00, 0x01 },
89 { 0x00d91f, 0x00, 0x01 },
90 { 0x00d91a, 0x00, 0x01 },
91 { 0x80f730, 0x00, 0x01 },
92 { 0x80f778, 0x00, 0xff },
93 { 0x80f73c, 0x01, 0x01 },
94 { 0x80f776, 0x00, 0x01 },
95 { 0x00d8fd, 0x01, 0xff },
96 { 0x00d830, 0x01, 0xff },
97 { 0x00d831, 0x00, 0xff },
98 { 0x00d832, 0x00, 0xff },
99 { 0x80f985, dev->ts_mode_serial, 0x01 },
100 { 0x80f986, dev->ts_mode_parallel, 0x01 },
101 { 0x00d827, 0x00, 0xff },
102 { 0x00d829, 0x00, 0xff },
103 { 0x800045, dev->cfg.adc_multiplier, 0xff },
106 dev_dbg(&client->dev, "\n");
108 /* Main clk control */
109 utmp = div_u64((u64)dev->cfg.clock * 0x80000, 1000000);
110 buf[0] = (utmp >> 0) & 0xff;
111 buf[1] = (utmp >> 8) & 0xff;
112 buf[2] = (utmp >> 16) & 0xff;
113 buf[3] = (utmp >> 24) & 0xff;
114 ret = regmap_bulk_write(dev->regmap, 0x800025, buf, 4);
115 if (ret)
116 goto err;
118 dev_dbg(&client->dev, "clk=%u clk_cw=%08x\n", dev->cfg.clock, utmp);
120 /* ADC clk control */
121 for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
122 if (clock_adc_lut[i].clock == dev->cfg.clock)
123 break;
125 if (i == ARRAY_SIZE(clock_adc_lut)) {
126 dev_err(&client->dev, "Couldn't find ADC config for clock %d\n",
127 dev->cfg.clock);
128 goto err;
131 utmp = div_u64((u64)clock_adc_lut[i].adc * 0x80000, 1000000);
132 buf[0] = (utmp >> 0) & 0xff;
133 buf[1] = (utmp >> 8) & 0xff;
134 buf[2] = (utmp >> 16) & 0xff;
135 ret = regmap_bulk_write(dev->regmap, 0x80f1cd, buf, 3);
136 if (ret)
137 goto err;
139 dev_dbg(&client->dev, "adc=%u adc_cw=%06x\n",
140 clock_adc_lut[i].adc, utmp);
142 /* Config register table */
143 for (i = 0; i < ARRAY_SIZE(tab); i++) {
144 ret = regmap_update_bits(dev->regmap, tab[i].reg, tab[i].mask,
145 tab[i].val);
146 if (ret)
147 goto err;
150 /* Demod clk output */
151 if (dev->cfg.dyn0_clk) {
152 ret = regmap_write(dev->regmap, 0x80fba8, 0x00);
153 if (ret)
154 goto err;
157 /* TS interface */
158 if (dev->cfg.ts_mode == AF9033_TS_MODE_USB) {
159 ret = regmap_update_bits(dev->regmap, 0x80f9a5, 0x01, 0x00);
160 if (ret)
161 goto err;
162 ret = regmap_update_bits(dev->regmap, 0x80f9b5, 0x01, 0x01);
163 if (ret)
164 goto err;
165 } else {
166 ret = regmap_update_bits(dev->regmap, 0x80f990, 0x01, 0x00);
167 if (ret)
168 goto err;
169 ret = regmap_update_bits(dev->regmap, 0x80f9b5, 0x01, 0x00);
170 if (ret)
171 goto err;
174 /* Demod core settings */
175 dev_dbg(&client->dev, "load ofsm settings\n");
176 switch (dev->cfg.tuner) {
177 case AF9033_TUNER_IT9135_38:
178 case AF9033_TUNER_IT9135_51:
179 case AF9033_TUNER_IT9135_52:
180 len = ARRAY_SIZE(ofsm_init_it9135_v1);
181 init = ofsm_init_it9135_v1;
182 break;
183 case AF9033_TUNER_IT9135_60:
184 case AF9033_TUNER_IT9135_61:
185 case AF9033_TUNER_IT9135_62:
186 len = ARRAY_SIZE(ofsm_init_it9135_v2);
187 init = ofsm_init_it9135_v2;
188 break;
189 default:
190 len = ARRAY_SIZE(ofsm_init);
191 init = ofsm_init;
192 break;
195 ret = af9033_wr_reg_val_tab(dev, init, len);
196 if (ret)
197 goto err;
199 /* Demod tuner specific settings */
200 dev_dbg(&client->dev, "load tuner specific settings\n");
201 switch (dev->cfg.tuner) {
202 case AF9033_TUNER_TUA9001:
203 len = ARRAY_SIZE(tuner_init_tua9001);
204 init = tuner_init_tua9001;
205 break;
206 case AF9033_TUNER_FC0011:
207 len = ARRAY_SIZE(tuner_init_fc0011);
208 init = tuner_init_fc0011;
209 break;
210 case AF9033_TUNER_MXL5007T:
211 len = ARRAY_SIZE(tuner_init_mxl5007t);
212 init = tuner_init_mxl5007t;
213 break;
214 case AF9033_TUNER_TDA18218:
215 len = ARRAY_SIZE(tuner_init_tda18218);
216 init = tuner_init_tda18218;
217 break;
218 case AF9033_TUNER_FC2580:
219 len = ARRAY_SIZE(tuner_init_fc2580);
220 init = tuner_init_fc2580;
221 break;
222 case AF9033_TUNER_FC0012:
223 len = ARRAY_SIZE(tuner_init_fc0012);
224 init = tuner_init_fc0012;
225 break;
226 case AF9033_TUNER_IT9135_38:
227 len = ARRAY_SIZE(tuner_init_it9135_38);
228 init = tuner_init_it9135_38;
229 break;
230 case AF9033_TUNER_IT9135_51:
231 len = ARRAY_SIZE(tuner_init_it9135_51);
232 init = tuner_init_it9135_51;
233 break;
234 case AF9033_TUNER_IT9135_52:
235 len = ARRAY_SIZE(tuner_init_it9135_52);
236 init = tuner_init_it9135_52;
237 break;
238 case AF9033_TUNER_IT9135_60:
239 len = ARRAY_SIZE(tuner_init_it9135_60);
240 init = tuner_init_it9135_60;
241 break;
242 case AF9033_TUNER_IT9135_61:
243 len = ARRAY_SIZE(tuner_init_it9135_61);
244 init = tuner_init_it9135_61;
245 break;
246 case AF9033_TUNER_IT9135_62:
247 len = ARRAY_SIZE(tuner_init_it9135_62);
248 init = tuner_init_it9135_62;
249 break;
250 default:
251 dev_dbg(&client->dev, "unsupported tuner ID=%d\n",
252 dev->cfg.tuner);
253 ret = -ENODEV;
254 goto err;
257 ret = af9033_wr_reg_val_tab(dev, init, len);
258 if (ret)
259 goto err;
261 if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
262 ret = regmap_update_bits(dev->regmap, 0x00d91c, 0x01, 0x01);
263 if (ret)
264 goto err;
265 ret = regmap_update_bits(dev->regmap, 0x00d917, 0x01, 0x00);
266 if (ret)
267 goto err;
268 ret = regmap_update_bits(dev->regmap, 0x00d916, 0x01, 0x00);
269 if (ret)
270 goto err;
273 switch (dev->cfg.tuner) {
274 case AF9033_TUNER_IT9135_60:
275 case AF9033_TUNER_IT9135_61:
276 case AF9033_TUNER_IT9135_62:
277 ret = regmap_write(dev->regmap, 0x800000, 0x01);
278 if (ret)
279 goto err;
282 dev->bandwidth_hz = 0; /* Force to program all parameters */
283 /* Init stats here in order signal app which stats are supported */
284 c->strength.len = 1;
285 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
286 c->cnr.len = 1;
287 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
288 c->block_count.len = 1;
289 c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
290 c->block_error.len = 1;
291 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
292 c->post_bit_count.len = 1;
293 c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
294 c->post_bit_error.len = 1;
295 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
297 return 0;
298 err:
299 dev_dbg(&client->dev, "failed=%d\n", ret);
300 return ret;
303 static int af9033_sleep(struct dvb_frontend *fe)
305 struct af9033_dev *dev = fe->demodulator_priv;
306 struct i2c_client *client = dev->client;
307 int ret;
308 unsigned int utmp;
310 dev_dbg(&client->dev, "\n");
312 ret = regmap_write(dev->regmap, 0x80004c, 0x01);
313 if (ret)
314 goto err;
315 ret = regmap_write(dev->regmap, 0x800000, 0x00);
316 if (ret)
317 goto err;
318 ret = regmap_read_poll_timeout(dev->regmap, 0x80004c, utmp, utmp == 0,
319 5000, 1000000);
320 if (ret)
321 goto err;
322 ret = regmap_update_bits(dev->regmap, 0x80fb24, 0x08, 0x08);
323 if (ret)
324 goto err;
326 /* Prevent current leak by setting TS interface to parallel mode */
327 if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
328 /* Enable parallel TS */
329 ret = regmap_update_bits(dev->regmap, 0x00d917, 0x01, 0x00);
330 if (ret)
331 goto err;
332 ret = regmap_update_bits(dev->regmap, 0x00d916, 0x01, 0x01);
333 if (ret)
334 goto err;
337 return 0;
338 err:
339 dev_dbg(&client->dev, "failed=%d\n", ret);
340 return ret;
343 static int af9033_get_tune_settings(struct dvb_frontend *fe,
344 struct dvb_frontend_tune_settings *fesettings)
346 /* 800 => 2000 because IT9135 v2 is slow to gain lock */
347 fesettings->min_delay_ms = 2000;
348 fesettings->step_size = 0;
349 fesettings->max_drift = 0;
351 return 0;
354 static int af9033_set_frontend(struct dvb_frontend *fe)
356 struct af9033_dev *dev = fe->demodulator_priv;
357 struct i2c_client *client = dev->client;
358 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
359 int ret, i;
360 unsigned int utmp, adc_freq;
361 u8 tmp, buf[3], bandwidth_reg_val;
362 u32 if_frequency;
364 dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u\n",
365 c->frequency, c->bandwidth_hz);
367 /* Check bandwidth */
368 switch (c->bandwidth_hz) {
369 case 6000000:
370 bandwidth_reg_val = 0x00;
371 break;
372 case 7000000:
373 bandwidth_reg_val = 0x01;
374 break;
375 case 8000000:
376 bandwidth_reg_val = 0x02;
377 break;
378 default:
379 dev_dbg(&client->dev, "invalid bandwidth_hz\n");
380 ret = -EINVAL;
381 goto err;
384 /* Program tuner */
385 if (fe->ops.tuner_ops.set_params)
386 fe->ops.tuner_ops.set_params(fe);
388 /* Coefficients */
389 if (c->bandwidth_hz != dev->bandwidth_hz) {
390 for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
391 if (coeff_lut[i].clock == dev->cfg.clock &&
392 coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
393 break;
396 if (i == ARRAY_SIZE(coeff_lut)) {
397 dev_err(&client->dev,
398 "Couldn't find config for clock %u\n",
399 dev->cfg.clock);
400 ret = -EINVAL;
401 goto err;
404 ret = regmap_bulk_write(dev->regmap, 0x800001, coeff_lut[i].val,
405 sizeof(coeff_lut[i].val));
406 if (ret)
407 goto err;
410 /* IF frequency control */
411 if (c->bandwidth_hz != dev->bandwidth_hz) {
412 for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
413 if (clock_adc_lut[i].clock == dev->cfg.clock)
414 break;
416 if (i == ARRAY_SIZE(clock_adc_lut)) {
417 dev_err(&client->dev,
418 "Couldn't find ADC clock for clock %u\n",
419 dev->cfg.clock);
420 ret = -EINVAL;
421 goto err;
423 adc_freq = clock_adc_lut[i].adc;
425 if (dev->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X)
426 adc_freq = 2 * adc_freq;
428 /* Get used IF frequency */
429 if (fe->ops.tuner_ops.get_if_frequency)
430 fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
431 else
432 if_frequency = 0;
434 utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x800000,
435 adc_freq);
437 if (!dev->cfg.spec_inv && if_frequency)
438 utmp = 0x800000 - utmp;
440 buf[0] = (utmp >> 0) & 0xff;
441 buf[1] = (utmp >> 8) & 0xff;
442 buf[2] = (utmp >> 16) & 0xff;
443 ret = regmap_bulk_write(dev->regmap, 0x800029, buf, 3);
444 if (ret)
445 goto err;
447 dev_dbg(&client->dev, "if_frequency_cw=%06x\n", utmp);
449 dev->bandwidth_hz = c->bandwidth_hz;
452 ret = regmap_update_bits(dev->regmap, 0x80f904, 0x03,
453 bandwidth_reg_val);
454 if (ret)
455 goto err;
456 ret = regmap_write(dev->regmap, 0x800040, 0x00);
457 if (ret)
458 goto err;
459 ret = regmap_write(dev->regmap, 0x800047, 0x00);
460 if (ret)
461 goto err;
462 ret = regmap_update_bits(dev->regmap, 0x80f999, 0x01, 0x00);
463 if (ret)
464 goto err;
466 if (c->frequency <= 230000000)
467 tmp = 0x00; /* VHF */
468 else
469 tmp = 0x01; /* UHF */
471 ret = regmap_write(dev->regmap, 0x80004b, tmp);
472 if (ret)
473 goto err;
474 /* Reset FSM */
475 ret = regmap_write(dev->regmap, 0x800000, 0x00);
476 if (ret)
477 goto err;
479 return 0;
480 err:
481 dev_dbg(&client->dev, "failed=%d\n", ret);
482 return ret;
485 static int af9033_get_frontend(struct dvb_frontend *fe,
486 struct dtv_frontend_properties *c)
488 struct af9033_dev *dev = fe->demodulator_priv;
489 struct i2c_client *client = dev->client;
490 int ret;
491 u8 buf[8];
493 dev_dbg(&client->dev, "\n");
495 /* Read all needed TPS registers */
496 ret = regmap_bulk_read(dev->regmap, 0x80f900, buf, 8);
497 if (ret)
498 goto err;
500 switch ((buf[0] >> 0) & 3) {
501 case 0:
502 c->transmission_mode = TRANSMISSION_MODE_2K;
503 break;
504 case 1:
505 c->transmission_mode = TRANSMISSION_MODE_8K;
506 break;
509 switch ((buf[1] >> 0) & 3) {
510 case 0:
511 c->guard_interval = GUARD_INTERVAL_1_32;
512 break;
513 case 1:
514 c->guard_interval = GUARD_INTERVAL_1_16;
515 break;
516 case 2:
517 c->guard_interval = GUARD_INTERVAL_1_8;
518 break;
519 case 3:
520 c->guard_interval = GUARD_INTERVAL_1_4;
521 break;
524 switch ((buf[2] >> 0) & 7) {
525 case 0:
526 c->hierarchy = HIERARCHY_NONE;
527 break;
528 case 1:
529 c->hierarchy = HIERARCHY_1;
530 break;
531 case 2:
532 c->hierarchy = HIERARCHY_2;
533 break;
534 case 3:
535 c->hierarchy = HIERARCHY_4;
536 break;
539 switch ((buf[3] >> 0) & 3) {
540 case 0:
541 c->modulation = QPSK;
542 break;
543 case 1:
544 c->modulation = QAM_16;
545 break;
546 case 2:
547 c->modulation = QAM_64;
548 break;
551 switch ((buf[4] >> 0) & 3) {
552 case 0:
553 c->bandwidth_hz = 6000000;
554 break;
555 case 1:
556 c->bandwidth_hz = 7000000;
557 break;
558 case 2:
559 c->bandwidth_hz = 8000000;
560 break;
563 switch ((buf[6] >> 0) & 7) {
564 case 0:
565 c->code_rate_HP = FEC_1_2;
566 break;
567 case 1:
568 c->code_rate_HP = FEC_2_3;
569 break;
570 case 2:
571 c->code_rate_HP = FEC_3_4;
572 break;
573 case 3:
574 c->code_rate_HP = FEC_5_6;
575 break;
576 case 4:
577 c->code_rate_HP = FEC_7_8;
578 break;
579 case 5:
580 c->code_rate_HP = FEC_NONE;
581 break;
584 switch ((buf[7] >> 0) & 7) {
585 case 0:
586 c->code_rate_LP = FEC_1_2;
587 break;
588 case 1:
589 c->code_rate_LP = FEC_2_3;
590 break;
591 case 2:
592 c->code_rate_LP = FEC_3_4;
593 break;
594 case 3:
595 c->code_rate_LP = FEC_5_6;
596 break;
597 case 4:
598 c->code_rate_LP = FEC_7_8;
599 break;
600 case 5:
601 c->code_rate_LP = FEC_NONE;
602 break;
605 return 0;
606 err:
607 dev_dbg(&client->dev, "failed=%d\n", ret);
608 return ret;
611 static int af9033_read_status(struct dvb_frontend *fe, enum fe_status *status)
613 struct af9033_dev *dev = fe->demodulator_priv;
614 struct i2c_client *client = dev->client;
615 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
616 int ret, tmp = 0;
617 u8 buf[7];
618 unsigned int utmp, utmp1;
620 dev_dbg(&client->dev, "\n");
622 *status = 0;
624 /* Radio channel status: 0=no result, 1=has signal, 2=no signal */
625 ret = regmap_read(dev->regmap, 0x800047, &utmp);
626 if (ret)
627 goto err;
629 /* Has signal */
630 if (utmp == 0x01)
631 *status |= FE_HAS_SIGNAL;
633 if (utmp != 0x02) {
634 /* TPS lock */
635 ret = regmap_read(dev->regmap, 0x80f5a9, &utmp);
636 if (ret)
637 goto err;
639 if ((utmp >> 0) & 0x01)
640 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
641 FE_HAS_VITERBI;
643 /* Full lock */
644 ret = regmap_read(dev->regmap, 0x80f999, &utmp);
645 if (ret)
646 goto err;
648 if ((utmp >> 0) & 0x01)
649 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
650 FE_HAS_VITERBI | FE_HAS_SYNC |
651 FE_HAS_LOCK;
654 dev->fe_status = *status;
656 /* Signal strength */
657 if (dev->fe_status & FE_HAS_SIGNAL) {
658 if (dev->is_af9035) {
659 ret = regmap_read(dev->regmap, 0x80004a, &utmp);
660 if (ret)
661 goto err;
662 tmp = -utmp * 1000;
663 } else {
664 ret = regmap_read(dev->regmap, 0x8000f7, &utmp);
665 if (ret)
666 goto err;
667 tmp = (utmp - 100) * 1000;
670 c->strength.len = 1;
671 c->strength.stat[0].scale = FE_SCALE_DECIBEL;
672 c->strength.stat[0].svalue = tmp;
673 } else {
674 c->strength.len = 1;
675 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
678 /* CNR */
679 if (dev->fe_status & FE_HAS_VITERBI) {
680 /* Read raw SNR value */
681 ret = regmap_bulk_read(dev->regmap, 0x80002c, buf, 3);
682 if (ret)
683 goto err;
685 utmp1 = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
687 /* Read superframe number */
688 ret = regmap_read(dev->regmap, 0x80f78b, &utmp);
689 if (ret)
690 goto err;
692 if (utmp)
693 utmp1 /= utmp;
695 /* Read current transmission mode */
696 ret = regmap_read(dev->regmap, 0x80f900, &utmp);
697 if (ret)
698 goto err;
700 switch ((utmp >> 0) & 3) {
701 case 0:
702 /* 2k */
703 utmp1 *= 4;
704 break;
705 case 1:
706 /* 8k */
707 utmp1 *= 1;
708 break;
709 case 2:
710 /* 4k */
711 utmp1 *= 2;
712 break;
713 default:
714 utmp1 *= 0;
715 break;
718 /* Read current modulation */
719 ret = regmap_read(dev->regmap, 0x80f903, &utmp);
720 if (ret)
721 goto err;
723 switch ((utmp >> 0) & 3) {
724 case 0:
726 * QPSK
727 * CNR[dB] 13 * -log10((1690000 - value) / value) + 2.6
728 * value [653799, 1689999], 2.6 / 13 = 3355443
730 utmp1 = clamp(utmp1, 653799U, 1689999U);
731 utmp1 = ((u64)(intlog10(utmp1)
732 - intlog10(1690000 - utmp1)
733 + 3355443) * 13 * 1000) >> 24;
734 break;
735 case 1:
737 * QAM-16
738 * CNR[dB] 6 * log10((value - 370000) / (828000 - value)) + 15.7
739 * value [371105, 827999], 15.7 / 6 = 43900382
741 utmp1 = clamp(utmp1, 371105U, 827999U);
742 utmp1 = ((u64)(intlog10(utmp1 - 370000)
743 - intlog10(828000 - utmp1)
744 + 43900382) * 6 * 1000) >> 24;
745 break;
746 case 2:
748 * QAM-64
749 * CNR[dB] 8 * log10((value - 193000) / (425000 - value)) + 23.8
750 * value [193246, 424999], 23.8 / 8 = 49912218
752 utmp1 = clamp(utmp1, 193246U, 424999U);
753 utmp1 = ((u64)(intlog10(utmp1 - 193000)
754 - intlog10(425000 - utmp1)
755 + 49912218) * 8 * 1000) >> 24;
756 break;
757 default:
758 utmp1 = 0;
759 break;
762 dev_dbg(&client->dev, "cnr=%u\n", utmp1);
764 c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
765 c->cnr.stat[0].svalue = utmp1;
766 } else {
767 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
770 /* UCB/PER/BER */
771 if (dev->fe_status & FE_HAS_LOCK) {
772 /* Outer FEC, 204 byte packets */
773 u16 abort_packet_count, rsd_packet_count;
774 /* Inner FEC, bits */
775 u32 rsd_bit_err_count;
778 * Packet count used for measurement is 10000
779 * (rsd_packet_count). Maybe it should be increased?
782 ret = regmap_bulk_read(dev->regmap, 0x800032, buf, 7);
783 if (ret)
784 goto err;
786 abort_packet_count = (buf[1] << 8) | (buf[0] << 0);
787 rsd_bit_err_count = (buf[4] << 16) | (buf[3] << 8) | buf[2];
788 rsd_packet_count = (buf[6] << 8) | (buf[5] << 0);
790 dev->error_block_count += abort_packet_count;
791 dev->total_block_count += rsd_packet_count;
792 dev->post_bit_error += rsd_bit_err_count;
793 dev->post_bit_count += rsd_packet_count * 204 * 8;
795 c->block_count.len = 1;
796 c->block_count.stat[0].scale = FE_SCALE_COUNTER;
797 c->block_count.stat[0].uvalue = dev->total_block_count;
799 c->block_error.len = 1;
800 c->block_error.stat[0].scale = FE_SCALE_COUNTER;
801 c->block_error.stat[0].uvalue = dev->error_block_count;
803 c->post_bit_count.len = 1;
804 c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
805 c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
807 c->post_bit_error.len = 1;
808 c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
809 c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
812 return 0;
813 err:
814 dev_dbg(&client->dev, "failed=%d\n", ret);
815 return ret;
818 static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr)
820 struct af9033_dev *dev = fe->demodulator_priv;
821 struct i2c_client *client = dev->client;
822 struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
823 int ret;
824 unsigned int utmp;
826 dev_dbg(&client->dev, "\n");
828 /* Use DVBv5 CNR */
829 if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL) {
830 /* Return 0.1 dB for AF9030 and 0-0xffff for IT9130. */
831 if (dev->is_af9035) {
832 /* 1000x => 10x (0.1 dB) */
833 *snr = div_s64(c->cnr.stat[0].svalue, 100);
834 } else {
835 /* 1000x => 1x (1 dB) */
836 *snr = div_s64(c->cnr.stat[0].svalue, 1000);
838 /* Read current modulation */
839 ret = regmap_read(dev->regmap, 0x80f903, &utmp);
840 if (ret)
841 goto err;
843 /* scale value to 0x0000-0xffff */
844 switch ((utmp >> 0) & 3) {
845 case 0:
846 *snr = *snr * 0xffff / 23;
847 break;
848 case 1:
849 *snr = *snr * 0xffff / 26;
850 break;
851 case 2:
852 *snr = *snr * 0xffff / 32;
853 break;
854 default:
855 goto err;
858 } else {
859 *snr = 0;
862 return 0;
863 err:
864 dev_dbg(&client->dev, "failed=%d\n", ret);
865 return ret;
868 static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
870 struct af9033_dev *dev = fe->demodulator_priv;
871 struct i2c_client *client = dev->client;
872 struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
873 int ret, tmp, power_real;
874 unsigned int utmp;
875 u8 gain_offset, buf[7];
877 dev_dbg(&client->dev, "\n");
879 if (dev->is_af9035) {
880 /* Read signal strength of 0-100 scale */
881 ret = regmap_read(dev->regmap, 0x800048, &utmp);
882 if (ret)
883 goto err;
885 /* Scale value to 0x0000-0xffff */
886 *strength = utmp * 0xffff / 100;
887 } else {
888 ret = regmap_read(dev->regmap, 0x8000f7, &utmp);
889 if (ret)
890 goto err;
892 ret = regmap_bulk_read(dev->regmap, 0x80f900, buf, 7);
893 if (ret)
894 goto err;
896 if (c->frequency <= 300000000)
897 gain_offset = 7; /* VHF */
898 else
899 gain_offset = 4; /* UHF */
901 power_real = (utmp - 100 - gain_offset) -
902 power_reference[((buf[3] >> 0) & 3)][((buf[6] >> 0) & 7)];
904 if (power_real < -15)
905 tmp = 0;
906 else if ((power_real >= -15) && (power_real < 0))
907 tmp = (2 * (power_real + 15)) / 3;
908 else if ((power_real >= 0) && (power_real < 20))
909 tmp = 4 * power_real + 10;
910 else if ((power_real >= 20) && (power_real < 35))
911 tmp = (2 * (power_real - 20)) / 3 + 90;
912 else
913 tmp = 100;
915 /* Scale value to 0x0000-0xffff */
916 *strength = tmp * 0xffff / 100;
919 return 0;
920 err:
921 dev_dbg(&client->dev, "failed=%d\n", ret);
922 return ret;
925 static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber)
927 struct af9033_dev *dev = fe->demodulator_priv;
929 *ber = (dev->post_bit_error - dev->post_bit_error_prev);
930 dev->post_bit_error_prev = dev->post_bit_error;
932 return 0;
935 static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
937 struct af9033_dev *dev = fe->demodulator_priv;
939 *ucblocks = dev->error_block_count;
941 return 0;
944 static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
946 struct af9033_dev *dev = fe->demodulator_priv;
947 struct i2c_client *client = dev->client;
948 int ret;
950 dev_dbg(&client->dev, "enable=%d\n", enable);
952 ret = regmap_update_bits(dev->regmap, 0x00fa04, 0x01, enable);
953 if (ret)
954 goto err;
956 return 0;
957 err:
958 dev_dbg(&client->dev, "failed=%d\n", ret);
959 return ret;
962 static int af9033_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
964 struct af9033_dev *dev = fe->demodulator_priv;
965 struct i2c_client *client = dev->client;
966 int ret;
968 dev_dbg(&client->dev, "onoff=%d\n", onoff);
970 ret = regmap_update_bits(dev->regmap, 0x80f993, 0x01, onoff);
971 if (ret)
972 goto err;
974 return 0;
975 err:
976 dev_dbg(&client->dev, "failed=%d\n", ret);
977 return ret;
980 static int af9033_pid_filter(struct dvb_frontend *fe, int index, u16 pid,
981 int onoff)
983 struct af9033_dev *dev = fe->demodulator_priv;
984 struct i2c_client *client = dev->client;
985 int ret;
986 u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff};
988 dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d\n",
989 index, pid, onoff);
991 if (pid > 0x1fff)
992 return 0;
994 ret = regmap_bulk_write(dev->regmap, 0x80f996, wbuf, 2);
995 if (ret)
996 goto err;
997 ret = regmap_write(dev->regmap, 0x80f994, onoff);
998 if (ret)
999 goto err;
1000 ret = regmap_write(dev->regmap, 0x80f995, index);
1001 if (ret)
1002 goto err;
1004 return 0;
1005 err:
1006 dev_dbg(&client->dev, "failed=%d\n", ret);
1007 return ret;
1010 static const struct dvb_frontend_ops af9033_ops = {
1011 .delsys = {SYS_DVBT},
1012 .info = {
1013 .name = "Afatech AF9033 (DVB-T)",
1014 .frequency_min_hz = 174 * MHz,
1015 .frequency_max_hz = 862 * MHz,
1016 .frequency_stepsize_hz = 250 * kHz,
1017 .caps = FE_CAN_FEC_1_2 |
1018 FE_CAN_FEC_2_3 |
1019 FE_CAN_FEC_3_4 |
1020 FE_CAN_FEC_5_6 |
1021 FE_CAN_FEC_7_8 |
1022 FE_CAN_FEC_AUTO |
1023 FE_CAN_QPSK |
1024 FE_CAN_QAM_16 |
1025 FE_CAN_QAM_64 |
1026 FE_CAN_QAM_AUTO |
1027 FE_CAN_TRANSMISSION_MODE_AUTO |
1028 FE_CAN_GUARD_INTERVAL_AUTO |
1029 FE_CAN_HIERARCHY_AUTO |
1030 FE_CAN_RECOVER |
1031 FE_CAN_MUTE_TS
1034 .init = af9033_init,
1035 .sleep = af9033_sleep,
1037 .get_tune_settings = af9033_get_tune_settings,
1038 .set_frontend = af9033_set_frontend,
1039 .get_frontend = af9033_get_frontend,
1041 .read_status = af9033_read_status,
1042 .read_snr = af9033_read_snr,
1043 .read_signal_strength = af9033_read_signal_strength,
1044 .read_ber = af9033_read_ber,
1045 .read_ucblocks = af9033_read_ucblocks,
1047 .i2c_gate_ctrl = af9033_i2c_gate_ctrl,
1050 static int af9033_probe(struct i2c_client *client,
1051 const struct i2c_device_id *id)
1053 struct af9033_config *cfg = client->dev.platform_data;
1054 struct af9033_dev *dev;
1055 int ret;
1056 u8 buf[8];
1057 u32 reg;
1058 static const struct regmap_config regmap_config = {
1059 .reg_bits = 24,
1060 .val_bits = 8,
1063 /* Allocate memory for the internal state */
1064 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1065 if (!dev) {
1066 ret = -ENOMEM;
1067 goto err;
1070 /* Setup the state */
1071 dev->client = client;
1072 memcpy(&dev->cfg, cfg, sizeof(dev->cfg));
1073 switch (dev->cfg.ts_mode) {
1074 case AF9033_TS_MODE_PARALLEL:
1075 dev->ts_mode_parallel = true;
1076 break;
1077 case AF9033_TS_MODE_SERIAL:
1078 dev->ts_mode_serial = true;
1079 break;
1080 case AF9033_TS_MODE_USB:
1081 /* USB mode for AF9035 */
1082 default:
1083 break;
1086 if (dev->cfg.clock != 12000000) {
1087 ret = -ENODEV;
1088 dev_err(&client->dev,
1089 "Unsupported clock %u Hz. Only 12000000 Hz is supported currently\n",
1090 dev->cfg.clock);
1091 goto err_kfree;
1094 /* Create regmap */
1095 dev->regmap = regmap_init_i2c(client, &regmap_config);
1096 if (IS_ERR(dev->regmap)) {
1097 ret = PTR_ERR(dev->regmap);
1098 goto err_kfree;
1101 /* Firmware version */
1102 switch (dev->cfg.tuner) {
1103 case AF9033_TUNER_IT9135_38:
1104 case AF9033_TUNER_IT9135_51:
1105 case AF9033_TUNER_IT9135_52:
1106 case AF9033_TUNER_IT9135_60:
1107 case AF9033_TUNER_IT9135_61:
1108 case AF9033_TUNER_IT9135_62:
1109 dev->is_it9135 = true;
1110 reg = 0x004bfc;
1111 break;
1112 default:
1113 dev->is_af9035 = true;
1114 reg = 0x0083e9;
1115 break;
1118 ret = regmap_bulk_read(dev->regmap, reg, &buf[0], 4);
1119 if (ret)
1120 goto err_regmap_exit;
1121 ret = regmap_bulk_read(dev->regmap, 0x804191, &buf[4], 4);
1122 if (ret)
1123 goto err_regmap_exit;
1125 dev_info(&client->dev,
1126 "firmware version: LINK %d.%d.%d.%d - OFDM %d.%d.%d.%d\n",
1127 buf[0], buf[1], buf[2], buf[3],
1128 buf[4], buf[5], buf[6], buf[7]);
1130 /* Sleep as chip seems to be partly active by default */
1131 /* IT9135 did not like to sleep at that early */
1132 if (dev->is_af9035) {
1133 ret = regmap_write(dev->regmap, 0x80004c, 0x01);
1134 if (ret)
1135 goto err_regmap_exit;
1136 ret = regmap_write(dev->regmap, 0x800000, 0x00);
1137 if (ret)
1138 goto err_regmap_exit;
1141 /* Create dvb frontend */
1142 memcpy(&dev->fe.ops, &af9033_ops, sizeof(dev->fe.ops));
1143 dev->fe.demodulator_priv = dev;
1144 *cfg->fe = &dev->fe;
1145 if (cfg->ops) {
1146 cfg->ops->pid_filter = af9033_pid_filter;
1147 cfg->ops->pid_filter_ctrl = af9033_pid_filter_ctrl;
1149 cfg->regmap = dev->regmap;
1150 i2c_set_clientdata(client, dev);
1152 dev_info(&client->dev, "Afatech AF9033 successfully attached\n");
1154 return 0;
1155 err_regmap_exit:
1156 regmap_exit(dev->regmap);
1157 err_kfree:
1158 kfree(dev);
1159 err:
1160 dev_dbg(&client->dev, "failed=%d\n", ret);
1161 return ret;
1164 static int af9033_remove(struct i2c_client *client)
1166 struct af9033_dev *dev = i2c_get_clientdata(client);
1168 dev_dbg(&client->dev, "\n");
1170 regmap_exit(dev->regmap);
1171 kfree(dev);
1173 return 0;
1176 static const struct i2c_device_id af9033_id_table[] = {
1177 {"af9033", 0},
1180 MODULE_DEVICE_TABLE(i2c, af9033_id_table);
1182 static struct i2c_driver af9033_driver = {
1183 .driver = {
1184 .name = "af9033",
1185 .suppress_bind_attrs = true,
1187 .probe = af9033_probe,
1188 .remove = af9033_remove,
1189 .id_table = af9033_id_table,
1192 module_i2c_driver(af9033_driver);
1194 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1195 MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver");
1196 MODULE_LICENSE("GPL");