2 * Samsung's Exynos3250 based Rinato board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Rinato board which is based on
8 * Samsung Exynos3250 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos3250.dtsi"
17 #include <dt-bindings/input/input.h>
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/clock/samsung,s2mps11.h>
22 model = "Samsung Rinato board";
23 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
30 reg = <0x40000000 0x1ff00000>;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0205F000 0x1000>;
39 compatible = "gpio-keys";
42 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_POWER>;
45 debounce-interval = <10>;
50 i2c_max77836: i2c-gpio-0 {
51 compatible = "i2c-gpio";
52 gpios = <&gpd0 2 0>, <&gpd0 3 0>;
56 max77836: subpmic@25 {
57 compatible = "maxim,max77836";
58 interrupt-parent = <&gpx1>;
64 compatible = "maxim,max77836-muic";
68 compatible = "maxim,max77836-regulator";
69 safeout_reg: SAFEOUT {
70 regulator-name = "SAFEOUT";
73 charger_reg: CHARGER {
74 regulator-name = "CHARGER";
75 regulator-min-microamp = <45000>;
76 regulator-max-microamp = <475000>;
81 regulator-name = "MOT_2.7V";
82 regulator-min-microvolt = <1100000>;
83 regulator-max-microvolt = <2700000>;
87 regulator-name = "UNUSED_LDO2";
88 regulator-min-microvolt = <800000>;
89 regulator-max-microvolt = <3950000>;
94 compatible = "maxim,max77836-charger";
96 maxim,constant-uvolt = <4350000>;
97 maxim,fast-charge-uamp = <225000>;
98 maxim,eoc-uamp = <7500>;
99 maxim,ovp-uvolt = <6500000>;
105 compatible = "regulator-haptic";
106 haptic-supply = <&motor_reg>;
107 min-microvolt = <1100000>;
108 max-microvolt = <2700000>;
113 vdd-supply = <&ldo3_reg>;
115 assigned-clocks = <&cmu CLK_SCLK_TSADC>;
116 assigned-clock-rates = <6000000>;
119 compatible = "ntc,ncp15wb473";
120 pullup-uv = <1800000>;
121 pullup-ohm = <100000>;
122 pulldown-ohm = <100000>;
123 io-channels = <&adc 0>;
127 compatible = "ntc,ncp15wb473";
128 pullup-uv = <1800000>;
129 pullup-ohm = <100000>;
130 pulldown-ohm = <100000>;
131 io-channels = <&adc 1>;
140 vusb_d-supply = <&ldo15_reg>;
141 vusb_a-supply = <&ldo12_reg>;
142 dr_mode = "peripheral";
147 vddcore-supply = <&ldo6_reg>;
148 vddio-supply = <&ldo6_reg>;
149 samsung,pll-clock-frequency = <24000000>;
153 #address-cells = <1>;
160 remote-endpoint = <&dsi_in>;
161 samsung,burst-clock-frequency = <250000000>;
162 samsung,esc-clock-frequency = <20000000>;
168 compatible = "samsung,s6e63j0x03";
170 vdd3-supply = <&ldo16_reg>;
171 vci-supply = <&ldo20_reg>;
172 reset-gpios = <&gpe0 1 0>;
173 te-gpios = <&gpx0 6 0>;
174 power-on-delay= <30>;
175 power-off-delay= <120>;
180 panel-width-mm = <29>;
181 panel-height-mm = <29>;
185 clock-frequency = <4600000>;
191 vfront-porch = <150>;
199 remote-endpoint = <&dsi_out>;
217 #address-cells = <1>;
219 samsung,i2c-sda-delay = <100>;
220 samsung,i2c-slave-addr = <0x10>;
221 samsung,i2c-max-bus-freq = <100000>;
225 compatible = "samsung,s2mps14-pmic";
226 interrupt-parent = <&gpx0>;
231 s2mps14_osc: clocks {
232 compatible = "samsung,s2mps14-clk";
234 clock-output-names = "s2mps14_ap", "unused",
240 regulator-name = "VAP_ALIVE_1.0V";
241 regulator-min-microvolt = <1000000>;
242 regulator-max-microvolt = <1000000>;
245 regulator-state-mem {
246 regulator-on-in-suspend;
251 regulator-name = "VAP_M1_1.2V";
252 regulator-min-microvolt = <1200000>;
253 regulator-max-microvolt = <1200000>;
256 regulator-state-mem {
257 regulator-off-in-suspend;
262 regulator-name = "VCC_AP_1.8V";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
267 regulator-state-mem {
268 regulator-off-in-suspend;
273 regulator-name = "VAP_AVDD_PLL1";
274 regulator-min-microvolt = <1800000>;
275 regulator-max-microvolt = <1800000>;
278 regulator-state-mem {
279 regulator-off-in-suspend;
284 regulator-name = "VAP_PLL_ISO_1.0V";
285 regulator-min-microvolt = <1000000>;
286 regulator-max-microvolt = <1000000>;
289 regulator-state-mem {
290 regulator-off-in-suspend;
295 regulator-name = "VAP_VMIPI_1.0V";
296 regulator-min-microvolt = <1000000>;
297 regulator-max-microvolt = <1000000>;
300 regulator-state-mem {
301 regulator-off-in-suspend;
306 regulator-name = "VAP_AVDD_1.8V";
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
311 regulator-state-mem {
312 regulator-off-in-suspend;
317 regulator-name = "VAP_USB_3.0V";
318 regulator-min-microvolt = <3000000>;
319 regulator-max-microvolt = <3000000>;
322 regulator-state-mem {
323 regulator-off-in-suspend;
328 regulator-name = "V_LPDDR_1.2V";
329 regulator-min-microvolt = <1200000>;
330 regulator-max-microvolt = <1200000>;
333 regulator-state-mem {
334 regulator-on-in-suspend;
339 regulator-name = "UNUSED_LDO10";
340 regulator-min-microvolt = <1000000>;
341 regulator-max-microvolt = <1000000>;
343 regulator-state-mem {
344 regulator-off-in-suspend;
349 regulator-name = "V_EMMC_1.8V";
350 regulator-min-microvolt = <1800000>;
351 regulator-max-microvolt = <1800000>;
352 samsung,ext-control-gpios = <&gpk0 2 0>;
356 regulator-name = "V_EMMC_2.8V";
357 regulator-min-microvolt = <2800000>;
358 regulator-max-microvolt = <2800000>;
359 samsung,ext-control-gpios = <&gpk0 2 0>;
363 regulator-name = "CAM_AVDD_2.8V";
364 regulator-min-microvolt = <2800000>;
365 regulator-max-microvolt = <2800000>;
367 regulator-state-mem {
368 regulator-off-in-suspend;
373 regulator-name = "UNUSED_LDO14";
374 regulator-min-microvolt = <2700000>;
375 regulator-max-microvolt = <2700000>;
377 regulator-state-mem {
378 regulator-off-in-suspend;
383 regulator-name = "TSP_AVDD_3.3V";
384 regulator-min-microvolt = <3300000>;
385 regulator-max-microvolt = <3300000>;
387 regulator-state-mem {
388 regulator-off-in-suspend;
393 regulator-name = "LCD_VDD_3.3V";
394 regulator-min-microvolt = <3300000>;
395 regulator-max-microvolt = <3300000>;
397 regulator-state-mem {
398 regulator-off-in-suspend;
403 regulator-name = "V_IRLED_3.3V";
404 regulator-min-microvolt = <3300000>;
405 regulator-max-microvolt = <3300000>;
407 regulator-state-mem {
408 regulator-off-in-suspend;
413 regulator-name = "CAM_AF_2.8V";
414 regulator-min-microvolt = <2800000>;
415 regulator-max-microvolt = <2800000>;
417 regulator-state-mem {
418 regulator-off-in-suspend;
423 regulator-name = "TSP_VDD_1.8V";
424 regulator-min-microvolt = <1800000>;
425 regulator-max-microvolt = <1800000>;
427 regulator-state-mem {
428 regulator-off-in-suspend;
433 regulator-name = "LCD_VDD_1.8V";
434 regulator-min-microvolt = <1800000>;
435 regulator-max-microvolt = <1800000>;
437 regulator-state-mem {
438 regulator-off-in-suspend;
443 regulator-name = "CAM_IO_1.8V";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
447 regulator-state-mem {
448 regulator-off-in-suspend;
453 regulator-name = "CAM_DVDD_1.2V";
454 regulator-min-microvolt = <1200000>;
455 regulator-max-microvolt = <1200000>;
457 regulator-state-mem {
458 regulator-off-in-suspend;
463 regulator-name = "HRM_VCC_1.8V";
464 regulator-min-microvolt = <1800000>;
465 regulator-max-microvolt = <1800000>;
470 regulator-name = "HRM_VCC_3.3V";
471 regulator-min-microvolt = <3000000>;
472 regulator-max-microvolt = <3000000>;
474 regulator-state-mem {
475 regulator-off-in-suspend;
480 regulator-name = "UNUSED_LDO25";
481 regulator-min-microvolt = <3000000>;
482 regulator-max-microvolt = <3000000>;
484 regulator-state-mem {
485 regulator-off-in-suspend;
490 regulator-name = "VAP_MIF_1.0V";
491 regulator-min-microvolt = <800000>;
492 regulator-max-microvolt = <900000>;
495 regulator-state-mem {
496 regulator-off-in-suspend;
501 regulator-name = "VAP_ARM_1.0V";
502 regulator-min-microvolt = <850000>;
503 regulator-max-microvolt = <1150000>;
506 regulator-state-mem {
507 regulator-off-in-suspend;
512 regulator-name = "VAP_INT3D_1.0V";
513 regulator-min-microvolt = <850000>;
514 regulator-max-microvolt = <1000000>;
517 regulator-state-mem {
518 regulator-off-in-suspend;
523 regulator-name = "VCC_SUB_1.95V";
524 regulator-min-microvolt = <1950000>;
525 regulator-max-microvolt = <1950000>;
528 regulator-state-mem {
529 regulator-on-in-suspend;
534 regulator-name = "VCC_SUB_1.35V";
535 regulator-min-microvolt = <1350000>;
536 regulator-max-microvolt = <1350000>;
539 regulator-state-mem {
540 regulator-on-in-suspend;
548 #address-cells = <1>;
550 samsung,i2c-sda-delay = <100>;
551 samsung,i2c-slave-addr = <0x10>;
552 samsung,i2c-max-bus-freq = <400000>;
556 compatible = "maxim,max77836-battery";
557 interrupt-parent = <&gpx1>;
576 #address-cells = <1>;
584 card-detect-delay = <200>;
585 vmmc-supply = <&ldo12_reg>;
586 clock-frequency = <100000000>;
587 clock-freq-min-max = <400000 100000000>;
588 samsung,dw-mshc-ciu-div = <1>;
589 samsung,dw-mshc-sdr-timing = <0 1>;
590 samsung,dw-mshc-ddr-timing = <1 2>;
591 pinctrl-names = "default";
592 pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
598 assigned-clocks = <&cmu CLK_SCLK_UART0>;
599 assigned-clock-rates = <100000000>;
608 vtmu-supply = <&ldo7_reg>;
613 clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
614 clock-names = "rtc", "rtc_src";
622 ppmu_dmc0_3: ppmu-event3-dmc0 {
623 event-name = "ppmu-event3-dmc0";
632 ppmu_dmc1_3: ppmu-event3-dmc1 {
633 event-name = "ppmu-event3-dmc1";
642 ppmu_leftbus_3: ppmu-event3-leftbus {
643 event-name = "ppmu-event3-leftbus";
652 ppmu_rightbus_3: ppmu-event3-rightbus {
653 event-name = "ppmu-event3-rightbus";
659 clock-frequency = <24000000>;
663 pinctrl-names = "default";
664 pinctrl-0 = <&sleep0>;
666 sleep0: sleep-state {
667 PIN_SLP(gpa0-0, INPUT, DOWN);
668 PIN_SLP(gpa0-1, INPUT, DOWN);
669 PIN_SLP(gpa0-2, INPUT, DOWN);
670 PIN_SLP(gpa0-3, INPUT, DOWN);
671 PIN_SLP(gpa0-4, INPUT, DOWN);
672 PIN_SLP(gpa0-5, INPUT, DOWN);
673 PIN_SLP(gpa0-6, INPUT, DOWN);
674 PIN_SLP(gpa0-7, INPUT, DOWN);
676 PIN_SLP(gpa1-0, INPUT, DOWN);
677 PIN_SLP(gpa1-1, INPUT, DOWN);
678 PIN_SLP(gpa1-2, INPUT, DOWN);
679 PIN_SLP(gpa1-3, INPUT, DOWN);
680 PIN_SLP(gpa1-4, INPUT, DOWN);
681 PIN_SLP(gpa1-5, INPUT, DOWN);
683 PIN_SLP(gpb-0, PREV, NONE);
684 PIN_SLP(gpb-1, PREV, NONE);
685 PIN_SLP(gpb-2, PREV, NONE);
686 PIN_SLP(gpb-3, PREV, NONE);
687 PIN_SLP(gpb-4, INPUT, DOWN);
688 PIN_SLP(gpb-5, INPUT, DOWN);
689 PIN_SLP(gpb-6, INPUT, DOWN);
690 PIN_SLP(gpb-7, INPUT, DOWN);
692 PIN_SLP(gpc0-0, INPUT, DOWN);
693 PIN_SLP(gpc0-1, INPUT, DOWN);
694 PIN_SLP(gpc0-2, INPUT, DOWN);
695 PIN_SLP(gpc0-3, INPUT, DOWN);
696 PIN_SLP(gpc0-4, INPUT, DOWN);
698 PIN_SLP(gpc1-0, INPUT, DOWN);
699 PIN_SLP(gpc1-1, INPUT, DOWN);
700 PIN_SLP(gpc1-2, INPUT, DOWN);
701 PIN_SLP(gpc1-3, INPUT, DOWN);
702 PIN_SLP(gpc1-4, INPUT, DOWN);
704 PIN_SLP(gpd0-0, INPUT, DOWN);
705 PIN_SLP(gpd0-1, INPUT, DOWN);
706 PIN_SLP(gpd0-2, INPUT, NONE);
707 PIN_SLP(gpd0-3, INPUT, NONE);
709 PIN_SLP(gpd1-0, INPUT, NONE);
710 PIN_SLP(gpd1-1, INPUT, NONE);
711 PIN_SLP(gpd1-2, INPUT, NONE);
712 PIN_SLP(gpd1-3, INPUT, NONE);
717 pinctrl-names = "default";
718 pinctrl-0 = <&sleep1>;
720 sleep1: sleep-state {
721 PIN_SLP(gpe0-0, PREV, NONE);
722 PIN_SLP(gpe0-1, PREV, NONE);
723 PIN_SLP(gpe0-2, INPUT, DOWN);
724 PIN_SLP(gpe0-3, INPUT, UP);
725 PIN_SLP(gpe0-4, INPUT, DOWN);
726 PIN_SLP(gpe0-5, INPUT, DOWN);
727 PIN_SLP(gpe0-6, INPUT, DOWN);
728 PIN_SLP(gpe0-7, INPUT, DOWN);
730 PIN_SLP(gpe1-0, INPUT, DOWN);
731 PIN_SLP(gpe1-1, PREV, NONE);
732 PIN_SLP(gpe1-2, INPUT, DOWN);
733 PIN_SLP(gpe1-3, INPUT, DOWN);
734 PIN_SLP(gpe1-4, INPUT, DOWN);
735 PIN_SLP(gpe1-5, INPUT, DOWN);
736 PIN_SLP(gpe1-6, INPUT, DOWN);
737 PIN_SLP(gpe1-7, INPUT, NONE);
739 PIN_SLP(gpe2-0, INPUT, NONE);
740 PIN_SLP(gpe2-1, INPUT, NONE);
741 PIN_SLP(gpe2-2, INPUT, NONE);
743 PIN_SLP(gpk0-0, INPUT, DOWN);
744 PIN_SLP(gpk0-1, INPUT, DOWN);
745 PIN_SLP(gpk0-2, OUT0, NONE);
746 PIN_SLP(gpk0-3, INPUT, DOWN);
747 PIN_SLP(gpk0-4, INPUT, DOWN);
748 PIN_SLP(gpk0-5, INPUT, DOWN);
749 PIN_SLP(gpk0-6, INPUT, DOWN);
750 PIN_SLP(gpk0-7, INPUT, DOWN);
752 PIN_SLP(gpk1-0, INPUT, DOWN);
753 PIN_SLP(gpk1-1, INPUT, DOWN);
754 PIN_SLP(gpk1-2, INPUT, DOWN);
755 PIN_SLP(gpk1-3, INPUT, DOWN);
756 PIN_SLP(gpk1-4, INPUT, DOWN);
757 PIN_SLP(gpk1-5, INPUT, DOWN);
758 PIN_SLP(gpk1-6, INPUT, DOWN);
760 PIN_SLP(gpk2-0, INPUT, DOWN);
761 PIN_SLP(gpk2-1, INPUT, DOWN);
762 PIN_SLP(gpk2-2, INPUT, DOWN);
763 PIN_SLP(gpk2-3, INPUT, DOWN);
764 PIN_SLP(gpk2-4, INPUT, DOWN);
765 PIN_SLP(gpk2-5, INPUT, DOWN);
766 PIN_SLP(gpk2-6, INPUT, DOWN);
768 PIN_SLP(gpl0-0, INPUT, DOWN);
769 PIN_SLP(gpl0-1, INPUT, DOWN);
770 PIN_SLP(gpl0-2, INPUT, DOWN);
771 PIN_SLP(gpl0-3, INPUT, DOWN);
773 PIN_SLP(gpm0-0, INPUT, DOWN);
774 PIN_SLP(gpm0-1, INPUT, DOWN);
775 PIN_SLP(gpm0-2, INPUT, DOWN);
776 PIN_SLP(gpm0-3, INPUT, DOWN);
777 PIN_SLP(gpm0-4, INPUT, DOWN);
778 PIN_SLP(gpm0-5, INPUT, DOWN);
779 PIN_SLP(gpm0-6, INPUT, DOWN);
780 PIN_SLP(gpm0-7, INPUT, DOWN);
782 PIN_SLP(gpm1-0, INPUT, DOWN);
783 PIN_SLP(gpm1-1, INPUT, DOWN);
784 PIN_SLP(gpm1-2, INPUT, DOWN);
785 PIN_SLP(gpm1-3, INPUT, DOWN);
786 PIN_SLP(gpm1-4, INPUT, DOWN);
787 PIN_SLP(gpm1-5, INPUT, DOWN);
788 PIN_SLP(gpm1-6, INPUT, DOWN);
790 PIN_SLP(gpm2-0, INPUT, DOWN);
791 PIN_SLP(gpm2-1, INPUT, DOWN);
792 PIN_SLP(gpm2-2, INPUT, DOWN);
793 PIN_SLP(gpm2-3, INPUT, DOWN);
794 PIN_SLP(gpm2-4, INPUT, DOWN);
796 PIN_SLP(gpm3-0, INPUT, DOWN);
797 PIN_SLP(gpm3-1, INPUT, DOWN);
798 PIN_SLP(gpm3-2, INPUT, DOWN);
799 PIN_SLP(gpm3-3, INPUT, DOWN);
800 PIN_SLP(gpm3-4, INPUT, DOWN);
801 PIN_SLP(gpm3-5, INPUT, DOWN);
802 PIN_SLP(gpm3-6, INPUT, DOWN);
803 PIN_SLP(gpm3-7, INPUT, DOWN);
805 PIN_SLP(gpm4-0, INPUT, DOWN);
806 PIN_SLP(gpm4-1, INPUT, DOWN);
807 PIN_SLP(gpm4-2, INPUT, DOWN);
808 PIN_SLP(gpm4-3, INPUT, DOWN);
809 PIN_SLP(gpm4-4, INPUT, DOWN);
810 PIN_SLP(gpm4-5, INPUT, DOWN);
811 PIN_SLP(gpm4-6, INPUT, DOWN);
812 PIN_SLP(gpm4-7, INPUT, DOWN);