2 * Samsung's Exynos5250 based Arndale board device tree source
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/input/input.h>
16 #include "exynos5250.dtsi"
19 model = "Insignal Arndale evaluation board based on EXYNOS5250";
20 compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
23 reg = <0x40000000 0x80000000>;
27 bootargs = "console=ttySAC2,115200";
31 compatible = "gpio-keys";
35 gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_MENU>;
42 gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_HOME>;
49 gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_UP>;
56 gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_DOWN>;
63 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_BACK>;
70 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_WAKEUP>;
77 compatible = "simple-bus";
81 main_dc_reg: regulator@0 {
82 compatible = "regulator-fixed";
84 regulator-name = "MAIN_DC";
87 mmc_reg: regulator@1 {
88 compatible = "regulator-fixed";
90 regulator-name = "VDD_33ON_2.8V";
91 regulator-min-microvolt = <2800000>;
92 regulator-max-microvolt = <2800000>;
93 gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
97 reg_hdmi_en: regulator@2 {
98 compatible = "regulator-fixed";
100 regulator-name = "hdmi-en";
106 compatible = "samsung,clock-xxti";
107 clock-frequency = <24000000>;
111 // SMSC USB3503 connected in hardware only mode as a PHY
113 compatible = "smsc,usb3503a";
115 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
116 connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
122 samsung,color-space = <0>;
123 samsung,dynamic-range = <0>;
124 samsung,ycbcr-coeff = <0>;
125 samsung,color-depth = <1>;
126 samsung,link-rate = <0x0a>;
127 samsung,lane-count = <4>;
134 native-mode = <&timing0>;
137 /* 2560x1600 DP panel */
138 clock-frequency = <50000>;
152 hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
153 vdd_osc-supply = <&ldo10_reg>;
154 vdd_pll-supply = <&ldo8_reg>;
155 vdd-supply = <&ldo8_reg>;
160 samsung,i2c-sda-delay = <100>;
161 samsung,i2c-max-bus-freq = <20000>;
162 samsung,i2c-slave-addr = <0x66>;
165 compatible = "samsung,s5m8767-pmic";
167 interrupt-parent = <&gpx3>;
168 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
170 vinb1-supply = <&main_dc_reg>;
171 vinb2-supply = <&main_dc_reg>;
172 vinb3-supply = <&main_dc_reg>;
173 vinb4-supply = <&main_dc_reg>;
174 vinb5-supply = <&main_dc_reg>;
175 vinb6-supply = <&main_dc_reg>;
176 vinb7-supply = <&main_dc_reg>;
177 vinb8-supply = <&main_dc_reg>;
178 vinb9-supply = <&main_dc_reg>;
180 vinl1-supply = <&buck7_reg>;
181 vinl2-supply = <&buck7_reg>;
182 vinl3-supply = <&buck7_reg>;
183 vinl4-supply = <&main_dc_reg>;
184 vinl5-supply = <&main_dc_reg>;
185 vinl6-supply = <&main_dc_reg>;
186 vinl7-supply = <&main_dc_reg>;
187 vinl8-supply = <&buck8_reg>;
188 vinl9-supply = <&buck8_reg>;
190 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
191 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
192 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
193 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
194 <&gpd1 1 GPIO_ACTIVE_HIGH>,
195 <&gpd1 2 GPIO_ACTIVE_HIGH>;
196 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
197 <&gpx2 4 GPIO_ACTIVE_HIGH>,
198 <&gpx2 5 GPIO_ACTIVE_HIGH>;
202 regulator-name = "VDD_ALIVE_1.0V";
203 regulator-min-microvolt = <1100000>;
204 regulator-max-microvolt = <1100000>;
211 regulator-name = "VDD_28IO_DP_1.35V";
212 regulator-min-microvolt = <1200000>;
213 regulator-max-microvolt = <1200000>;
220 regulator-name = "VDD_COMMON1_1.8V";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
229 regulator-name = "VDD_IOPERI_1.8V";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1800000>;
237 regulator-name = "VDD_EXT_1.8V";
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <1800000>;
246 regulator-name = "VDD_MPLL_1.1V";
247 regulator-min-microvolt = <1100000>;
248 regulator-max-microvolt = <1100000>;
255 regulator-name = "VDD_XPLL_1.1V";
256 regulator-min-microvolt = <1100000>;
257 regulator-max-microvolt = <1100000>;
264 regulator-name = "VDD_COMMON2_1.0V";
265 regulator-min-microvolt = <1000000>;
266 regulator-max-microvolt = <1000000>;
273 regulator-name = "VDD_33ON_3.0V";
274 regulator-min-microvolt = <3000000>;
275 regulator-max-microvolt = <3000000>;
280 regulator-name = "VDD_COMMON3_1.8V";
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
289 regulator-name = "VDD_ABB2_1.8V";
290 regulator-min-microvolt = <1800000>;
291 regulator-max-microvolt = <1800000>;
298 regulator-name = "VDD_USB_3.0V";
299 regulator-min-microvolt = <3000000>;
300 regulator-max-microvolt = <3000000>;
307 regulator-name = "VDDQ_C2C_W_1.8V";
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <1800000>;
316 regulator-name = "VDD18_ABB0_3_1.8V";
317 regulator-min-microvolt = <1800000>;
318 regulator-max-microvolt = <1800000>;
325 regulator-name = "VDD10_COMMON4_1.0V";
326 regulator-min-microvolt = <1000000>;
327 regulator-max-microvolt = <1000000>;
334 regulator-name = "VDD18_HSIC_1.8V";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
343 regulator-name = "VDDQ_MMC2_3_2.8V";
344 regulator-min-microvolt = <2800000>;
345 regulator-max-microvolt = <2800000>;
352 regulator-name = "VDD_33ON_2.8V";
353 regulator-min-microvolt = <2800000>;
354 regulator-max-microvolt = <2800000>;
359 regulator-name = "EXT_33_OFF";
360 regulator-min-microvolt = <3300000>;
361 regulator-max-microvolt = <3300000>;
366 regulator-name = "EXT_28_OFF";
367 regulator-min-microvolt = <2800000>;
368 regulator-max-microvolt = <2800000>;
373 regulator-name = "PVDD_LDO25";
374 regulator-min-microvolt = <1200000>;
375 regulator-max-microvolt = <1200000>;
380 regulator-name = "EXT_18_OFF";
381 regulator-min-microvolt = <1800000>;
382 regulator-max-microvolt = <1800000>;
387 regulator-name = "vdd_mif";
388 regulator-min-microvolt = <950000>;
389 regulator-max-microvolt = <1200000>;
396 regulator-name = "vdd_arm";
397 regulator-min-microvolt = <912500>;
398 regulator-max-microvolt = <1300000>;
405 regulator-name = "vdd_int";
406 regulator-min-microvolt = <900000>;
407 regulator-max-microvolt = <1200000>;
414 regulator-name = "vdd_g3d";
415 regulator-min-microvolt = <1000000>;
416 regulator-max-microvolt = <1000000>;
423 regulator-name = "VDD_MEM_1.35V";
424 regulator-min-microvolt = <750000>;
425 regulator-max-microvolt = <1355000>;
432 regulator-name = "PVDD_BUCK7";
438 regulator-name = "PVDD_BUCK8";
444 regulator-name = "VDD_33_OFF_EXT1";
445 regulator-min-microvolt = <750000>;
446 regulator-max-microvolt = <3000000>;
456 samsung,i2c-sda-delay = <100>;
457 samsung,i2c-max-bus-freq = <66000>;
458 samsung,i2c-slave-addr = <0x50>;
461 compatible = "samsung,exynos4210-hdmiddc";
470 compatible = "wlf,wm1811";
473 AVDD2-supply = <&main_dc_reg>;
474 CPVDD-supply = <&main_dc_reg>;
475 DBVDD1-supply = <&main_dc_reg>;
476 DBVDD2-supply = <&main_dc_reg>;
477 DBVDD3-supply = <&main_dc_reg>;
478 LDO1VDD-supply = <&main_dc_reg>;
479 SPKVDD1-supply = <&main_dc_reg>;
480 SPKVDD2-supply = <&main_dc_reg>;
482 wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
483 wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
490 samsung,i2c-sda-delay = <100>;
491 samsung,i2c-max-bus-freq = <66000>;
492 samsung,i2c-slave-addr = <0x38>;
495 compatible = "samsung,exynos4212-hdmiphy";
502 samsung,i2c-sda-delay = <100>;
503 samsung,i2c-max-bus-freq = <40000>;
504 samsung,i2c-slave-addr = <0x38>;
506 sata_phy_i2c:sata-phy@38 {
507 compatible = "samsung,exynos-sataphy-i2c";
517 samsung,mfc-r = <0x43000000 0x800000>;
518 samsung,mfc-l = <0x51000000 0x800000>;
525 card-detect-delay = <200>;
526 samsung,dw-mshc-ciu-div = <3>;
527 samsung,dw-mshc-sdr-timing = <2 3>;
528 samsung,dw-mshc-ddr-timing = <1 2>;
529 vmmc-supply = <&mmc_reg>;
530 pinctrl-names = "default";
531 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
539 card-detect-delay = <200>;
540 samsung,dw-mshc-ciu-div = <3>;
541 samsung,dw-mshc-sdr-timing = <2 3>;
542 samsung,dw-mshc-ddr-timing = <1 2>;
543 vmmc-supply = <&mmc_reg>;
544 pinctrl-names = "default";
545 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
561 samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;