| blob | 464f09a1a4a5bffebeb90eafcd0e251f962602c7 |
1 /include/ "skeleton.dtsi"
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h>
5 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
7 / {
8 compatible = "marvell,kirkwood";
9 interrupt-parent = <&intc>;
11 cpus {
12 #address-cells = <1>;
13 #size-cells = <0>;
15 cpu@0 {
16 device_type = "cpu";
17 compatible = "marvell,feroceon";
18 reg = <0>;
19 clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
20 clock-names = "cpu_clk", "ddrclk", "powersave";
21 };
22 };
24 aliases {
25 gpio0 = &gpio0;
26 gpio1 = &gpio1;
27 i2c0 = &i2c0;
28 };
30 mbus {
31 compatible = "marvell,kirkwood-mbus", "simple-bus";
32 #address-cells = <2>;
33 #size-cells = <1>;
34 /* If a board file needs to change this ranges it must replace it completely */
35 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
36 MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
37 MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
38 >;
39 controller = <&mbusc>;
40 pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
41 pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
43 cesa: crypto@0301 {
44 compatible = "marvell,orion-crypto";
45 reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
46 <MBUS_ID(0x03, 0x01) 0 0x800>;
47 reg-names = "regs", "sram";
48 interrupts = <22>;
49 clocks = <&gate_clk 17>;
50 status = "okay";
51 };
53 nand: nand@012f {
54 #address-cells = <1>;
55 #size-cells = <1>;
56 cle = <0>;
57 ale = <1>;
58 bank-width = <1>;
59 compatible = "marvell,orion-nand";
60 reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
61 chip-delay = <25>;
62 /* set partition map and/or chip-delay in board dts */
63 clocks = <&gate_clk 7>;
64 pinctrl-0 = <&pmx_nand>;
65 pinctrl-names = "default";
66 status = "disabled";
67 };
68 };
70 ocp@f1000000 {
71 compatible = "simple-bus";
72 ranges = <0x00000000 0xf1000000 0x0100000>;
73 #address-cells = <1>;
74 #size-cells = <1>;
76 pinctrl: pin-controller@10000 {
77 /* set compatible property in SoC file */
78 reg = <0x10000 0x20>;
80 pmx_ge1: pmx-ge1 {
81 marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
82 "mpp24", "mpp25", "mpp26", "mpp27",
83 "mpp30", "mpp31", "mpp32", "mpp33";
84 marvell,function = "ge1";
85 };
87 pmx_nand: pmx-nand {
88 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
89 "mpp4", "mpp5", "mpp18", "mpp19";
90 marvell,function = "nand";
91 };
93 /*
94 * Default SPI0 pinctrl setting with CSn on mpp0,
95 * overwrite marvell,pins on board level if required.
96 */
97 pmx_spi: pmx-spi {
98 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
99 marvell,function = "spi";
100 };
102 pmx_twsi0: pmx-twsi0 {
103 marvell,pins = "mpp8", "mpp9";
104 marvell,function = "twsi0";
105 };
107 /*
108 * Default UART pinctrl setting without RTS/CTS,
109 * overwrite marvell,pins on board level if required.
110 */
111 pmx_uart0: pmx-uart0 {
112 marvell,pins = "mpp10", "mpp11";
113 marvell,function = "uart0";
114 };
116 pmx_uart1: pmx-uart1 {
117 marvell,pins = "mpp13", "mpp14";
118 marvell,function = "uart1";
119 };
120 };
122 core_clk: core-clocks@10030 {
123 compatible = "marvell,kirkwood-core-clock";
124 reg = <0x10030 0x4>;
125 #clock-cells = <1>;
126 };
128 spi0: spi@10600 {
129 compatible = "marvell,orion-spi";
130 #address-cells = <1>;
131 #size-cells = <0>;
132 cell-index = <0>;
133 interrupts = <23>;
134 reg = <0x10600 0x28>;
135 clocks = <&gate_clk 7>;
136 pinctrl-0 = <&pmx_spi>;
137 pinctrl-names = "default";
138 status = "disabled";
139 };
141 gpio0: gpio@10100 {
142 compatible = "marvell,orion-gpio";
143 #gpio-cells = <2>;
144 gpio-controller;
145 reg = <0x10100 0x40>;
146 ngpios = <32>;
147 interrupt-controller;
148 #interrupt-cells = <2>;
149 interrupts = <35>, <36>, <37>, <38>;
150 clocks = <&gate_clk 7>;
151 };
153 gpio1: gpio@10140 {
154 compatible = "marvell,orion-gpio";
155 #gpio-cells = <2>;
156 gpio-controller;
157 reg = <0x10140 0x40>;
158 ngpios = <18>;
159 interrupt-controller;
160 #interrupt-cells = <2>;
161 interrupts = <39>, <40>, <41>;
162 clocks = <&gate_clk 7>;
163 };
165 i2c0: i2c@11000 {
166 compatible = "marvell,mv64xxx-i2c";
167 reg = <0x11000 0x20>;
168 #address-cells = <1>;
169 #size-cells = <0>;
170 interrupts = <29>;
171 clock-frequency = <100000>;
172 clocks = <&gate_clk 7>;
173 pinctrl-0 = <&pmx_twsi0>;
174 pinctrl-names = "default";
175 status = "disabled";
176 };
178 uart0: serial@12000 {
179 compatible = "ns16550a";
180 reg = <0x12000 0x100>;
181 reg-shift = <2>;
182 interrupts = <33>;
183 clocks = <&gate_clk 7>;
184 pinctrl-0 = <&pmx_uart0>;
185 pinctrl-names = "default";
186 status = "disabled";
187 };
189 uart1: serial@12100 {
190 compatible = "ns16550a";
191 reg = <0x12100 0x100>;
192 reg-shift = <2>;
193 interrupts = <34>;
194 clocks = <&gate_clk 7>;
195 pinctrl-0 = <&pmx_uart1>;
196 pinctrl-names = "default";
197 status = "disabled";
198 };
200 mbusc: mbus-controller@20000 {
201 compatible = "marvell,mbus-controller";
202 reg = <0x20000 0x80>, <0x1500 0x20>;
203 };
205 sysc: system-controller@20000 {
206 compatible = "marvell,orion-system-controller";
207 reg = <0x20000 0x120>;
208 };
210 bridge_intc: bridge-interrupt-ctrl@20110 {
211 compatible = "marvell,orion-bridge-intc";
212 interrupt-controller;
213 #interrupt-cells = <1>;
214 reg = <0x20110 0x8>;
215 interrupts = <1>;
216 marvell,#interrupts = <6>;
217 };
219 gate_clk: clock-gating-control@2011c {
220 compatible = "marvell,kirkwood-gating-clock";
221 reg = <0x2011c 0x4>;
222 clocks = <&core_clk 0>;
223 #clock-cells = <1>;
224 };
226 l2: l2-cache@20128 {
227 compatible = "marvell,kirkwood-cache";
228 reg = <0x20128 0x4>;
229 };
231 intc: main-interrupt-ctrl@20200 {
232 compatible = "marvell,orion-intc";
233 interrupt-controller;
234 #interrupt-cells = <1>;
235 reg = <0x20200 0x10>, <0x20210 0x10>;
236 };
238 timer: timer@20300 {
239 compatible = "marvell,orion-timer";
240 reg = <0x20300 0x20>;
241 interrupt-parent = <&bridge_intc>;
242 interrupts = <1>, <2>;
243 clocks = <&core_clk 0>;
244 };
246 wdt: watchdog-timer@20300 {
247 compatible = "marvell,orion-wdt";
248 reg = <0x20300 0x28>, <0x20108 0x4>;
249 interrupt-parent = <&bridge_intc>;
250 interrupts = <3>;
251 clocks = <&gate_clk 7>;
252 status = "okay";
253 };
255 usb0: ehci@50000 {
256 compatible = "marvell,orion-ehci";
257 reg = <0x50000 0x1000>;
258 interrupts = <19>;
259 clocks = <&gate_clk 3>;
260 status = "okay";
261 };
263 dma0: xor@60800 {
264 compatible = "marvell,orion-xor";
265 reg = <0x60800 0x100
266 0x60A00 0x100>;
267 status = "okay";
268 clocks = <&gate_clk 8>;
270 xor00 {
271 interrupts = <5>;
272 dmacap,memcpy;
273 dmacap,xor;
274 };
275 xor01 {
276 interrupts = <6>;
277 dmacap,memcpy;
278 dmacap,xor;
279 dmacap,memset;
280 };
281 };
283 dma1: xor@60900 {
284 compatible = "marvell,orion-xor";
285 reg = <0x60900 0x100
286 0x60B00 0x100>;
287 status = "okay";
288 clocks = <&gate_clk 16>;
290 xor00 {
291 interrupts = <7>;
292 dmacap,memcpy;
293 dmacap,xor;
294 };
295 xor01 {
296 interrupts = <8>;
297 dmacap,memcpy;
298 dmacap,xor;
299 dmacap,memset;
300 };
301 };
303 eth0: ethernet-controller@72000 {
304 compatible = "marvell,kirkwood-eth";
305 #address-cells = <1>;
306 #size-cells = <0>;
307 reg = <0x72000 0x4000>;
308 clocks = <&gate_clk 0>;
309 marvell,tx-checksum-limit = <1600>;
310 status = "disabled";
312 eth0port: ethernet0-port@0 {
313 compatible = "marvell,kirkwood-eth-port";
314 reg = <0>;
315 interrupts = <11>;
316 /* overwrite MAC address in bootloader */
317 local-mac-address = [00 00 00 00 00 00];
318 /* set phy-handle property in board file */
319 };
320 };
322 mdio: mdio-bus@72004 {
323 compatible = "marvell,orion-mdio";
324 #address-cells = <1>;
325 #size-cells = <0>;
326 reg = <0x72004 0x84>;
327 interrupts = <46>;
328 clocks = <&gate_clk 0>;
329 status = "disabled";
331 /* add phy nodes in board file */
332 };
334 eth1: ethernet-controller@76000 {
335 compatible = "marvell,kirkwood-eth";
336 #address-cells = <1>;
337 #size-cells = <0>;
338 reg = <0x76000 0x4000>;
339 clocks = <&gate_clk 19>;
340 marvell,tx-checksum-limit = <1600>;
341 pinctrl-0 = <&pmx_ge1>;
342 pinctrl-names = "default";
343 status = "disabled";
345 eth1port: ethernet1-port@0 {
346 compatible = "marvell,kirkwood-eth-port";
347 reg = <0>;
348 interrupts = <15>;
349 /* overwrite MAC address in bootloader */
350 local-mac-address = [00 00 00 00 00 00];
351 /* set phy-handle property in board file */
352 };
353 };
355 sata_phy0: sata-phy@82000 {
356 compatible = "marvell,mvebu-sata-phy";
357 reg = <0x82000 0x0334>;
358 clocks = <&gate_clk 14>;
359 clock-names = "sata";
360 #phy-cells = <0>;
361 status = "ok";
362 };
364 sata_phy1: sata-phy@84000 {
365 compatible = "marvell,mvebu-sata-phy";
366 reg = <0x84000 0x0334>;
367 clocks = <&gate_clk 15>;
368 clock-names = "sata";
369 #phy-cells = <0>;
370 status = "ok";
371 };
373 audio0: audio-controller@a0000 {
374 compatible = "marvell,kirkwood-audio";
375 #sound-dai-cells = <0>;
376 reg = <0xa0000 0x2210>;
377 interrupts = <24>;
378 clocks = <&gate_clk 9>;
379 clock-names = "internal";
380 status = "disabled";
381 };
382 };
383 };