ARM: rockchip: fix broken build

[linux/fpc-iii.git] / drivers / scsi / mpt2sas / mpt2sas_base.c

/*
 * This is the Fusion MPT base driver providing common API layer interface
 * for access to MPT (Message Passing Technology) firmware.
 *
 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
 * Copyright (C) 2007-2014  LSI Corporation
 * Copyright (C) 20013-2014 Avago Technologies
 *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * NO WARRANTY
 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
 * solely responsible for determining the appropriateness of using and
 * distributing the Program and assumes all risks associated with its
 * exercise of rights under this Agreement, including but not limited to
 * the risks and costs of program errors, damage to or loss of data,
 * programs or equipment, and unavailability or interruption of operations.

 * DISCLAIMER OF LIABILITY
 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 * USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/sort.h>
#include <linux/io.h>
#include <linux/time.h>
#include <linux/kthread.h>
#include <linux/aer.h>

#include "mpt2sas_base.h"

static MPT_CALLBACK     mpt_callbacks[MPT_MAX_CALLBACKS];

#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */

#define MAX_HBA_QUEUE_DEPTH     30000
#define MAX_CHAIN_DEPTH         100000
static int max_queue_depth = -1;
module_param(max_queue_depth, int, 0);
MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");

static int max_sgl_entries = -1;
module_param(max_sgl_entries, int, 0);
MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");

static int msix_disable = -1;
module_param(msix_disable, int, 0);
MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");

static int max_msix_vectors = -1;
module_param(max_msix_vectors, int, 0);
MODULE_PARM_DESC(max_msix_vectors, " max msix vectors ");

static int mpt2sas_fwfault_debug;
MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
        "and halt firmware - (default=0)");

static int disable_discovery = -1;
module_param(disable_discovery, int, 0);
MODULE_PARM_DESC(disable_discovery, " disable discovery ");

static int
_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);

static int
_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);

/**
 * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
 *
 */
static int
_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
{
        int ret = param_set_int(val, kp);
        struct MPT2SAS_ADAPTER *ioc;

        if (ret)
                return ret;

        printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug);
        list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
                ioc->fwfault_debug = mpt2sas_fwfault_debug;
        return 0;
}

module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
    param_get_int, &mpt2sas_fwfault_debug, 0644);

/**
 *  mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
 * @arg: input argument, used to derive ioc
 *
 * Return 0 if controller is removed from pci subsystem.
 * Return -1 for other case.
 */
static int mpt2sas_remove_dead_ioc_func(void *arg)
{
                struct MPT2SAS_ADAPTER *ioc = (struct MPT2SAS_ADAPTER *)arg;
                struct pci_dev *pdev;

                if ((ioc == NULL))
                        return -1;

                pdev = ioc->pdev;
                if ((pdev == NULL))
                        return -1;
                pci_stop_and_remove_bus_device_locked(pdev);
                return 0;
}


/**
 * _base_fault_reset_work - workq handling ioc fault conditions
 * @work: input argument, used to derive ioc
 * Context: sleep.
 *
 * Return nothing.
 */
static void
_base_fault_reset_work(struct work_struct *work)
{
        struct MPT2SAS_ADAPTER *ioc =
            container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work);
        unsigned long    flags;
        u32 doorbell;
        int rc;
        struct task_struct *p;

        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
        if (ioc->shost_recovery || ioc->pci_error_recovery)
                goto rearm_timer;
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);

        doorbell = mpt2sas_base_get_iocstate(ioc, 0);
        if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
                printk(MPT2SAS_INFO_FMT "%s : SAS host is non-operational !!!!\n",
                        ioc->name, __func__);

                /* It may be possible that EEH recovery can resolve some of
                 * pci bus failure issues rather removing the dead ioc function
                 * by considering controller is in a non-operational state. So
                 * here priority is given to the EEH recovery. If it doesn't
                 * not resolve this issue, mpt2sas driver will consider this
                 * controller to non-operational state and remove the dead ioc
                 * function.
                 */
                if (ioc->non_operational_loop++ < 5) {
                        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
                                                         flags);
                        goto rearm_timer;
                }

                /*
                 * Call _scsih_flush_pending_cmds callback so that we flush all
                 * pending commands back to OS. This call is required to aovid
                 * deadlock at block layer. Dead IOC will fail to do diag reset,
                 * and this call is safe since dead ioc will never return any
                 * command back from HW.
                 */
                ioc->schedule_dead_ioc_flush_running_cmds(ioc);
                /*
                 * Set remove_host flag early since kernel thread will
                 * take some time to execute.
                 */
                ioc->remove_host = 1;
                /*Remove the Dead Host */
                p = kthread_run(mpt2sas_remove_dead_ioc_func, ioc,
                    "mpt2sas_dead_ioc_%d", ioc->id);
                if (IS_ERR(p)) {
                        printk(MPT2SAS_ERR_FMT
                        "%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
                        ioc->name, __func__);
                } else {
                    printk(MPT2SAS_ERR_FMT
                        "%s: Running mpt2sas_dead_ioc thread success !!!!\n",
                        ioc->name, __func__);
                }

                return; /* don't rearm timer */
        }

        ioc->non_operational_loop = 0;

        if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
                rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
                    FORCE_BIG_HAMMER);
                printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name,
                    __func__, (rc == 0) ? "success" : "failed");
                doorbell = mpt2sas_base_get_iocstate(ioc, 0);
                if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
                        mpt2sas_base_fault_info(ioc, doorbell &
                            MPI2_DOORBELL_DATA_MASK);
        }

        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 rearm_timer:
        if (ioc->fault_reset_work_q)
                queue_delayed_work(ioc->fault_reset_work_q,
                    &ioc->fault_reset_work,
                    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}

/**
 * mpt2sas_base_start_watchdog - start the fault_reset_work_q
 * @ioc: per adapter object
 * Context: sleep.
 *
 * Return nothing.
 */
void
mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
{
        unsigned long    flags;

        if (ioc->fault_reset_work_q)
                return;

        /* initialize fault polling */
        INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
        snprintf(ioc->fault_reset_work_q_name,
            sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
        ioc->fault_reset_work_q =
                create_singlethread_workqueue(ioc->fault_reset_work_q_name);
        if (!ioc->fault_reset_work_q) {
                printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
                    ioc->name, __func__, __LINE__);
                        return;
        }
        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
        if (ioc->fault_reset_work_q)
                queue_delayed_work(ioc->fault_reset_work_q,
                    &ioc->fault_reset_work,
                    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}

/**
 * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
 * @ioc: per adapter object
 * Context: sleep.
 *
 * Return nothing.
 */
void
mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
{
        unsigned long    flags;
        struct workqueue_struct *wq;

        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
        wq = ioc->fault_reset_work_q;
        ioc->fault_reset_work_q = NULL;
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
        if (wq) {
                if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
                        flush_workqueue(wq);
                destroy_workqueue(wq);
        }
}

/**
 * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
 * @ioc: per adapter object
 * @fault_code: fault code
 *
 * Return nothing.
 */
void
mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
{
        printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
            ioc->name, fault_code);
}

/**
 * mpt2sas_halt_firmware - halt's mpt controller firmware
 * @ioc: per adapter object
 *
 * For debugging timeout related issues.  Writing 0xCOFFEE00
 * to the doorbell register will halt controller firmware. With
 * the purpose to stop both driver and firmware, the enduser can
 * obtain a ring buffer from controller UART.
 */
void
mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc)
{
        u32 doorbell;

        if (!ioc->fwfault_debug)
                return;

        dump_stack();

        doorbell = readl(&ioc->chip->Doorbell);
        if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
                mpt2sas_base_fault_info(ioc , doorbell);
        else {
                writel(0xC0FFEE00, &ioc->chip->Doorbell);
                printk(MPT2SAS_ERR_FMT "Firmware is halted due to command "
                    "timeout\n", ioc->name);
        }

        panic("panic in %s\n", __func__);
}

#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
 * _base_sas_ioc_info - verbose translation of the ioc status
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 * @request_hdr: request mf
 *
 * Return nothing.
 */
static void
_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
     MPI2RequestHeader_t *request_hdr)
{
        u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
            MPI2_IOCSTATUS_MASK;
        char *desc = NULL;
        u16 frame_sz;
        char *func_str = NULL;

        /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
        if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
            request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
            request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
                return;

        if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
                return;

        switch (ioc_status) {

/****************************************************************************
*  Common IOCStatus values for all replies
****************************************************************************/

        case MPI2_IOCSTATUS_INVALID_FUNCTION:
                desc = "invalid function";
                break;
        case MPI2_IOCSTATUS_BUSY:
                desc = "busy";
                break;
        case MPI2_IOCSTATUS_INVALID_SGL:
                desc = "invalid sgl";
                break;
        case MPI2_IOCSTATUS_INTERNAL_ERROR:
                desc = "internal error";
                break;
        case MPI2_IOCSTATUS_INVALID_VPID:
                desc = "invalid vpid";
                break;
        case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
                desc = "insufficient resources";
                break;
        case MPI2_IOCSTATUS_INVALID_FIELD:
                desc = "invalid field";
                break;
        case MPI2_IOCSTATUS_INVALID_STATE:
                desc = "invalid state";
                break;
        case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
                desc = "op state not supported";
                break;

/****************************************************************************
*  Config IOCStatus values
****************************************************************************/

        case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
                desc = "config invalid action";
                break;
        case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
                desc = "config invalid type";
                break;
        case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
                desc = "config invalid page";
                break;
        case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
                desc = "config invalid data";
                break;
        case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
                desc = "config no defaults";
                break;
        case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
                desc = "config cant commit";
                break;

/****************************************************************************
*  SCSI IO Reply
****************************************************************************/

        case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
        case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
        case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
        case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
        case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
        case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
        case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
        case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
        case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
        case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
        case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
        case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
                break;

/****************************************************************************
*  For use by SCSI Initiator and SCSI Target end-to-end data protection
****************************************************************************/

        case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
                desc = "eedp guard error";
                break;
        case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
                desc = "eedp ref tag error";
                break;
        case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
                desc = "eedp app tag error";
                break;

/****************************************************************************
*  SCSI Target values
****************************************************************************/

        case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
                desc = "target invalid io index";
                break;
        case MPI2_IOCSTATUS_TARGET_ABORTED:
                desc = "target aborted";
                break;
        case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
                desc = "target no conn retryable";
                break;
        case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
                desc = "target no connection";
                break;
        case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
                desc = "target xfer count mismatch";
                break;
        case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
                desc = "target data offset error";
                break;
        case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
                desc = "target too much write data";
                break;
        case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
                desc = "target iu too short";
                break;
        case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
                desc = "target ack nak timeout";
                break;
        case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
                desc = "target nak received";
                break;

/****************************************************************************
*  Serial Attached SCSI values
****************************************************************************/

        case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
                desc = "smp request failed";
                break;
        case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
                desc = "smp data overrun";
                break;

/****************************************************************************
*  Diagnostic Buffer Post / Diagnostic Release values
****************************************************************************/

        case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
                desc = "diagnostic released";
                break;
        default:
                break;
        }

        if (!desc)
                return;

        switch (request_hdr->Function) {
        case MPI2_FUNCTION_CONFIG:
                frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
                func_str = "config_page";
                break;
        case MPI2_FUNCTION_SCSI_TASK_MGMT:
                frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
                func_str = "task_mgmt";
                break;
        case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
                frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
                func_str = "sas_iounit_ctl";
                break;
        case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
                frame_sz = sizeof(Mpi2SepRequest_t);
                func_str = "enclosure";
                break;
        case MPI2_FUNCTION_IOC_INIT:
                frame_sz = sizeof(Mpi2IOCInitRequest_t);
                func_str = "ioc_init";
                break;
        case MPI2_FUNCTION_PORT_ENABLE:
                frame_sz = sizeof(Mpi2PortEnableRequest_t);
                func_str = "port_enable";
                break;
        case MPI2_FUNCTION_SMP_PASSTHROUGH:
                frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
                func_str = "smp_passthru";
                break;
        default:
                frame_sz = 32;
                func_str = "unknown";
                break;
        }

        printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p),"
            " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str);

        _debug_dump_mf(request_hdr, frame_sz/4);
}

/**
 * _base_display_event_data - verbose translation of firmware asyn events
 * @ioc: per adapter object
 * @mpi_reply: reply mf payload returned from firmware
 *
 * Return nothing.
 */
static void
_base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
    Mpi2EventNotificationReply_t *mpi_reply)
{
        char *desc = NULL;
        u16 event;

        if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
                return;

        event = le16_to_cpu(mpi_reply->Event);

        switch (event) {
        case MPI2_EVENT_LOG_DATA:
                desc = "Log Data";
                break;
        case MPI2_EVENT_STATE_CHANGE:
                desc = "Status Change";
                break;
        case MPI2_EVENT_HARD_RESET_RECEIVED:
                desc = "Hard Reset Received";
                break;
        case MPI2_EVENT_EVENT_CHANGE:
                desc = "Event Change";
                break;
        case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
                desc = "Device Status Change";
                break;
        case MPI2_EVENT_IR_OPERATION_STATUS:
                if (!ioc->hide_ir_msg)
                        desc = "IR Operation Status";
                break;
        case MPI2_EVENT_SAS_DISCOVERY:
        {
                Mpi2EventDataSasDiscovery_t *event_data =
                    (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
                printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name,
                    (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
                    "start" : "stop");
                if (event_data->DiscoveryStatus)
                        printk("discovery_status(0x%08x)",
                            le32_to_cpu(event_data->DiscoveryStatus));
                printk("\n");
                return;
        }
        case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
                desc = "SAS Broadcast Primitive";
                break;
        case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
                desc = "SAS Init Device Status Change";
                break;
        case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
                desc = "SAS Init Table Overflow";
                break;
        case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
                desc = "SAS Topology Change List";
                break;
        case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
                desc = "SAS Enclosure Device Status Change";
                break;
        case MPI2_EVENT_IR_VOLUME:
                if (!ioc->hide_ir_msg)
                        desc = "IR Volume";
                break;
        case MPI2_EVENT_IR_PHYSICAL_DISK:
                if (!ioc->hide_ir_msg)
                        desc = "IR Physical Disk";
                break;
        case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
                if (!ioc->hide_ir_msg)
                        desc = "IR Configuration Change List";
                break;
        case MPI2_EVENT_LOG_ENTRY_ADDED:
                if (!ioc->hide_ir_msg)
                        desc = "Log Entry Added";
                break;
        case MPI2_EVENT_TEMP_THRESHOLD:
                desc = "Temperature Threshold";
                break;
        }

        if (!desc)
                return;

        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc);
}
#endif

/**
 * _base_sas_log_info - verbose translation of firmware log info
 * @ioc: per adapter object
 * @log_info: log info
 *
 * Return nothing.
 */
static void
_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
{
        union loginfo_type {
                u32     loginfo;
                struct {
                        u32     subcode:16;
                        u32     code:8;
                        u32     originator:4;
                        u32     bus_type:4;
                } dw;
        };
        union loginfo_type sas_loginfo;
        char *originator_str = NULL;

        sas_loginfo.loginfo = log_info;
        if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
                return;

        /* each nexus loss loginfo */
        if (log_info == 0x31170000)
                return;

        /* eat the loginfos associated with task aborts */
        if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
            0x31140000 || log_info == 0x31130000))
                return;

        switch (sas_loginfo.dw.originator) {
        case 0:
                originator_str = "IOP";
                break;
        case 1:
                originator_str = "PL";
                break;
        case 2:
                if (!ioc->hide_ir_msg)
                        originator_str = "IR";
                else
                        originator_str = "WarpDrive";
                break;
        }

        printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), "
            "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info,
             originator_str, sas_loginfo.dw.code,
             sas_loginfo.dw.subcode);
}

/**
 * _base_display_reply_info -
 * @ioc: per adapter object
 * @smid: system request message index
 * @msix_index: MSIX table index supplied by the OS
 * @reply: reply message frame(lower 32bit addr)
 *
 * Return nothing.
 */
static void
_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
    u32 reply)
{
        MPI2DefaultReply_t *mpi_reply;
        u16 ioc_status;

        mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
        if (unlikely(!mpi_reply)) {
                printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
                        ioc->name, __FILE__, __LINE__, __func__);
                return;
        }
        ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
        if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
            (ioc->logging_level & MPT_DEBUG_REPLY)) {
                _base_sas_ioc_info(ioc , mpi_reply,
                   mpt2sas_base_get_msg_frame(ioc, smid));
        }
#endif
        if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
                _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo));
}

/**
 * mpt2sas_base_done - base internal command completion routine
 * @ioc: per adapter object
 * @smid: system request message index
 * @msix_index: MSIX table index supplied by the OS
 * @reply: reply message frame(lower 32bit addr)
 *
 * Return 1 meaning mf should be freed from _base_interrupt
 *        0 means the mf is freed from this function.
 */
u8
mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
    u32 reply)
{
        MPI2DefaultReply_t *mpi_reply;

        mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
        if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
                return 1;

        if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
                return 1;

        ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
        if (mpi_reply) {
                ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID;
                memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
        }
        ioc->base_cmds.status &= ~MPT2_CMD_PENDING;

        complete(&ioc->base_cmds.done);
        return 1;
}

/**
 * _base_async_event - main callback handler for firmware asyn events
 * @ioc: per adapter object
 * @msix_index: MSIX table index supplied by the OS
 * @reply: reply message frame(lower 32bit addr)
 *
 * Returns void.
 */
static void
_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
{
        Mpi2EventNotificationReply_t *mpi_reply;
        Mpi2EventAckRequest_t *ack_request;
        u16 smid;

        mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
        if (!mpi_reply)
                return;
        if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
                return;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
        _base_display_event_data(ioc, mpi_reply);
#endif
        if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
                goto out;
        smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                goto out;
        }

        ack_request = mpt2sas_base_get_msg_frame(ioc, smid);
        memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
        ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
        ack_request->Event = mpi_reply->Event;
        ack_request->EventContext = mpi_reply->EventContext;
        ack_request->VF_ID = 0;  /* TODO */
        ack_request->VP_ID = 0;
        mpt2sas_base_put_smid_default(ioc, smid);

 out:

        /* scsih callback handler */
        mpt2sas_scsih_event_callback(ioc, msix_index, reply);

        /* ctl callback handler */
        mpt2sas_ctl_event_callback(ioc, msix_index, reply);

        return;
}

/**
 * _base_get_cb_idx - obtain the callback index
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Return callback index.
 */
static u8
_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        int i;
        u8 cb_idx;

        if (smid < ioc->hi_priority_smid) {
                i = smid - 1;
                cb_idx = ioc->scsi_lookup[i].cb_idx;
        } else if (smid < ioc->internal_smid) {
                i = smid - ioc->hi_priority_smid;
                cb_idx = ioc->hpr_lookup[i].cb_idx;
        } else if (smid <= ioc->hba_queue_depth) {
                i = smid - ioc->internal_smid;
                cb_idx = ioc->internal_lookup[i].cb_idx;
        } else
                cb_idx = 0xFF;
        return cb_idx;
}

/**
 * _base_mask_interrupts - disable interrupts
 * @ioc: per adapter object
 *
 * Disabling ResetIRQ, Reply and Doorbell Interrupts
 *
 * Return nothing.
 */
static void
_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc)
{
        u32 him_register;

        ioc->mask_interrupts = 1;
        him_register = readl(&ioc->chip->HostInterruptMask);
        him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
        writel(him_register, &ioc->chip->HostInterruptMask);
        readl(&ioc->chip->HostInterruptMask);
}

/**
 * _base_unmask_interrupts - enable interrupts
 * @ioc: per adapter object
 *
 * Enabling only Reply Interrupts
 *
 * Return nothing.
 */
static void
_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
{
        u32 him_register;

        him_register = readl(&ioc->chip->HostInterruptMask);
        him_register &= ~MPI2_HIM_RIM;
        writel(him_register, &ioc->chip->HostInterruptMask);
        ioc->mask_interrupts = 0;
}

union reply_descriptor {
        u64 word;
        struct {
                u32 low;
                u32 high;
        } u;
};

/**
 * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
 * @irq: irq number (not used)
 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
 * @r: pt_regs pointer (not used)
 *
 * Return IRQ_HANDLE if processed, else IRQ_NONE.
 */
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
        struct adapter_reply_queue *reply_q = bus_id;
        union reply_descriptor rd;
        u32 completed_cmds;
        u8 request_desript_type;
        u16 smid;
        u8 cb_idx;
        u32 reply;
        u8 msix_index = reply_q->msix_index;
        struct MPT2SAS_ADAPTER *ioc = reply_q->ioc;
        Mpi2ReplyDescriptorsUnion_t *rpf;
        u8 rc;

        if (ioc->mask_interrupts)
                return IRQ_NONE;

        if (!atomic_add_unless(&reply_q->busy, 1, 1))
                return IRQ_NONE;

        rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
        request_desript_type = rpf->Default.ReplyFlags
             & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
        if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
                atomic_dec(&reply_q->busy);
                return IRQ_NONE;
        }

        completed_cmds = 0;
        cb_idx = 0xFF;
        do {
                rd.word = le64_to_cpu(rpf->Words);
                if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
                        goto out;
                reply = 0;
                smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
                if (request_desript_type ==
                    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
                        reply = le32_to_cpu
                                (rpf->AddressReply.ReplyFrameAddress);
                        if (reply > ioc->reply_dma_max_address ||
                            reply < ioc->reply_dma_min_address)
                                reply = 0;
                } else if (request_desript_type ==
                    MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
                        goto next;
                else if (request_desript_type ==
                    MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
                        goto next;
                if (smid) {
                        cb_idx = _base_get_cb_idx(ioc, smid);
                if ((likely(cb_idx < MPT_MAX_CALLBACKS))
                            && (likely(mpt_callbacks[cb_idx] != NULL))) {
                                rc = mpt_callbacks[cb_idx](ioc, smid,
                                    msix_index, reply);
                        if (reply)
                                _base_display_reply_info(ioc, smid,
                                    msix_index, reply);
                        if (rc)
                                mpt2sas_base_free_smid(ioc, smid);
                        }
                }
                if (!smid)
                        _base_async_event(ioc, msix_index, reply);

                /* reply free queue handling */
                if (reply) {
                        ioc->reply_free_host_index =
                            (ioc->reply_free_host_index ==
                            (ioc->reply_free_queue_depth - 1)) ?
                            0 : ioc->reply_free_host_index + 1;
                        ioc->reply_free[ioc->reply_free_host_index] =
                            cpu_to_le32(reply);
                        wmb();
                        writel(ioc->reply_free_host_index,
                            &ioc->chip->ReplyFreeHostIndex);
                }

 next:

                rpf->Words = cpu_to_le64(ULLONG_MAX);
                reply_q->reply_post_host_index =
                    (reply_q->reply_post_host_index ==
                    (ioc->reply_post_queue_depth - 1)) ? 0 :
                    reply_q->reply_post_host_index + 1;
                request_desript_type =
                    reply_q->reply_post_free[reply_q->reply_post_host_index].
                    Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
                completed_cmds++;
                if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
                        goto out;
                if (!reply_q->reply_post_host_index)
                        rpf = reply_q->reply_post_free;
                else
                        rpf++;
        } while (1);

 out:

        if (!completed_cmds) {
                atomic_dec(&reply_q->busy);
                return IRQ_NONE;
        }
        wmb();
        if (ioc->is_warpdrive) {
                writel(reply_q->reply_post_host_index,
                ioc->reply_post_host_index[msix_index]);
                atomic_dec(&reply_q->busy);
                return IRQ_HANDLED;
        }
        writel(reply_q->reply_post_host_index | (msix_index <<
            MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
        atomic_dec(&reply_q->busy);
        return IRQ_HANDLED;
}

/**
 * _base_is_controller_msix_enabled - is controller support muli-reply queues
 * @ioc: per adapter object
 *
 */
static inline int
_base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER *ioc)
{
        return (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
}

/**
 * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
 * @ioc: per adapter object
 * Context: ISR conext
 *
 * Called when a Task Management request has completed. We want
 * to flush the other reply queues so all the outstanding IO has been
 * completed back to OS before we process the TM completetion.
 *
 * Return nothing.
 */
void
mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc)
{
        struct adapter_reply_queue *reply_q;

        /* If MSIX capability is turned off
         * then multi-queues are not enabled
         */
        if (!_base_is_controller_msix_enabled(ioc))
                return;

        list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
                if (ioc->shost_recovery)
                        return;
                /* TMs are on msix_index == 0 */
                if (reply_q->msix_index == 0)
                        continue;
                _base_interrupt(reply_q->vector, (void *)reply_q);
        }
}

/**
 * mpt2sas_base_release_callback_handler - clear interrupt callback handler
 * @cb_idx: callback index
 *
 * Return nothing.
 */
void
mpt2sas_base_release_callback_handler(u8 cb_idx)
{
        mpt_callbacks[cb_idx] = NULL;
}

/**
 * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
 * @cb_func: callback function
 *
 * Returns cb_func.
 */
u8
mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func)
{
        u8 cb_idx;

        for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
                if (mpt_callbacks[cb_idx] == NULL)
                        break;

        mpt_callbacks[cb_idx] = cb_func;
        return cb_idx;
}

/**
 * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
 *
 * Return nothing.
 */
void
mpt2sas_base_initialize_callback_handler(void)
{
        u8 cb_idx;

        for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
                mpt2sas_base_release_callback_handler(cb_idx);
}

/**
 * mpt2sas_base_build_zero_len_sge - build zero length sg entry
 * @ioc: per adapter object
 * @paddr: virtual address for SGE
 *
 * Create a zero length scatter gather entry to insure the IOCs hardware has
 * something to use if the target device goes brain dead and tries
 * to send data even when none is asked for.
 *
 * Return nothing.
 */
void
mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr)
{
        u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
            MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
            MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
            MPI2_SGE_FLAGS_SHIFT);
        ioc->base_add_sg_single(paddr, flags_length, -1);
}

/**
 * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
 * @paddr: virtual address for SGE
 * @flags_length: SGE flags and data transfer length
 * @dma_addr: Physical address
 *
 * Return nothing.
 */
static void
_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
{
        Mpi2SGESimple32_t *sgel = paddr;

        flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
            MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
        sgel->FlagsLength = cpu_to_le32(flags_length);
        sgel->Address = cpu_to_le32(dma_addr);
}


/**
 * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
 * @paddr: virtual address for SGE
 * @flags_length: SGE flags and data transfer length
 * @dma_addr: Physical address
 *
 * Return nothing.
 */
static void
_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
{
        Mpi2SGESimple64_t *sgel = paddr;

        flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
            MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
        sgel->FlagsLength = cpu_to_le32(flags_length);
        sgel->Address = cpu_to_le64(dma_addr);
}

#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))

/**
 * _base_config_dma_addressing - set dma addressing
 * @ioc: per adapter object
 * @pdev: PCI device struct
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
{
        struct sysinfo s;
        u64 consistent_dma_mask;

        if (ioc->dma_mask)
                consistent_dma_mask = DMA_BIT_MASK(64);
        else
                consistent_dma_mask = DMA_BIT_MASK(32);

        if (sizeof(dma_addr_t) > 4) {
                const uint64_t required_mask =
                    dma_get_required_mask(&pdev->dev);
                if ((required_mask > DMA_BIT_MASK(32)) &&
                    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
                    !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
                        ioc->base_add_sg_single = &_base_add_sg_single_64;
                        ioc->sge_size = sizeof(Mpi2SGESimple64_t);
                        ioc->dma_mask = 64;
                        goto out;
                }
        }

        if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
            && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
                ioc->base_add_sg_single = &_base_add_sg_single_32;
                ioc->sge_size = sizeof(Mpi2SGESimple32_t);
                ioc->dma_mask = 32;
        } else
                return -ENODEV;

 out:
        si_meminfo(&s);
        printk(MPT2SAS_INFO_FMT
            "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
            ioc->name, ioc->dma_mask, convert_to_kb(s.totalram));

        return 0;
}

static int
_base_change_consistent_dma_mask(struct MPT2SAS_ADAPTER *ioc,
                                  struct pci_dev *pdev)
{
        if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
                if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
                        return -ENODEV;
        }
        return 0;
}
/**
 * _base_check_enable_msix - checks MSIX capabable.
 * @ioc: per adapter object
 *
 * Check to see if card is capable of MSIX, and set number
 * of available msix vectors
 */
static int
_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
        int base;
        u16 message_control;


        /* Check whether controller SAS2008 B0 controller,
           if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
        if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
            ioc->pdev->revision == 0x01) {
                return -EINVAL;
        }

        base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
        if (!base) {
                dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
                    "supported\n", ioc->name));
                return -EINVAL;
        }

        /* get msix vector count */
        /* NUMA_IO not supported for older controllers */
        if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
            ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
                ioc->msix_vector_count = 1;
        else {
                pci_read_config_word(ioc->pdev, base + 2, &message_control);
                ioc->msix_vector_count = (message_control & 0x3FF) + 1;
        }
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
            "vector_count(%d)\n", ioc->name, ioc->msix_vector_count));

        return 0;
}

/**
 * _base_free_irq - free irq
 * @ioc: per adapter object
 *
 * Freeing respective reply_queue from the list.
 */
static void
_base_free_irq(struct MPT2SAS_ADAPTER *ioc)
{
        struct adapter_reply_queue *reply_q, *next;

        if (list_empty(&ioc->reply_queue_list))
                return;

        list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
                list_del(&reply_q->list);
                irq_set_affinity_hint(reply_q->vector, NULL);
                free_cpumask_var(reply_q->affinity_hint);
                synchronize_irq(reply_q->vector);
                free_irq(reply_q->vector, reply_q);
                kfree(reply_q);
        }
}

/**
 * _base_request_irq - request irq
 * @ioc: per adapter object
 * @index: msix index into vector table
 * @vector: irq vector
 *
 * Inserting respective reply_queue into the list.
 */
static int
_base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
{
        struct adapter_reply_queue *reply_q;
        int r;

        reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
        if (!reply_q) {
                printk(MPT2SAS_ERR_FMT "unable to allocate memory %d!\n",
                    ioc->name, (int)sizeof(struct adapter_reply_queue));
                return -ENOMEM;
        }
        reply_q->ioc = ioc;
        reply_q->msix_index = index;
        reply_q->vector = vector;

        if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
                return -ENOMEM;
        cpumask_clear(reply_q->affinity_hint);

        atomic_set(&reply_q->busy, 0);
        if (ioc->msix_enable)
                snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
                    MPT2SAS_DRIVER_NAME, ioc->id, index);
        else
                snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
                    MPT2SAS_DRIVER_NAME, ioc->id);
        r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
            reply_q);
        if (r) {
                printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
                    reply_q->name, vector);
                kfree(reply_q);
                return -EBUSY;
        }

        INIT_LIST_HEAD(&reply_q->list);
        list_add_tail(&reply_q->list, &ioc->reply_queue_list);
        return 0;
}

/**
 * _base_assign_reply_queues - assigning msix index for each cpu
 * @ioc: per adapter object
 *
 * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
 *
 * It would nice if we could call irq_set_affinity, however it is not
 * an exported symbol
 */
static void
_base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
{
        unsigned int cpu, nr_cpus, nr_msix, index = 0;
        struct adapter_reply_queue *reply_q;

        if (!_base_is_controller_msix_enabled(ioc))
                return;

        memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);

        nr_cpus = num_online_cpus();
        nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
                                               ioc->facts.MaxMSIxVectors);
        if (!nr_msix)
                return;

        cpu = cpumask_first(cpu_online_mask);

        list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {

                unsigned int i, group = nr_cpus / nr_msix;

                if (cpu >= nr_cpus)
                        break;

                if (index < nr_cpus % nr_msix)
                        group++;

                for (i = 0 ; i < group ; i++) {
                        ioc->cpu_msix_table[cpu] = index;
                        cpumask_or(reply_q->affinity_hint,
                                   reply_q->affinity_hint, get_cpu_mask(cpu));
                        cpu = cpumask_next(cpu, cpu_online_mask);
                }

                if (irq_set_affinity_hint(reply_q->vector,
                                           reply_q->affinity_hint))
                        dinitprintk(ioc, pr_info(MPT2SAS_FMT
                            "error setting affinity hint for irq vector %d\n",
                            ioc->name, reply_q->vector));
                index++;
        }
}

/**
 * _base_disable_msix - disables msix
 * @ioc: per adapter object
 *
 */
static void
_base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
{
        if (ioc->msix_enable) {
                pci_disable_msix(ioc->pdev);
                ioc->msix_enable = 0;
        }
}

/**
 * _base_enable_msix - enables msix, failback to io_apic
 * @ioc: per adapter object
 *
 */
static int
_base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
        struct msix_entry *entries, *a;
        int r;
        int i;
        u8 try_msix = 0;

        if (msix_disable == -1 || msix_disable == 0)
                try_msix = 1;

        if (!try_msix)
                goto try_ioapic;

        if (_base_check_enable_msix(ioc) != 0)
                goto try_ioapic;

        ioc->reply_queue_count = min_t(int, ioc->cpu_count,
            ioc->msix_vector_count);

        if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
                max_msix_vectors = 8;

        if (max_msix_vectors > 0) {
                ioc->reply_queue_count = min_t(int, max_msix_vectors,
                    ioc->reply_queue_count);
                ioc->msix_vector_count = ioc->reply_queue_count;
        } else if (max_msix_vectors == 0)
                goto try_ioapic;

        printk(MPT2SAS_INFO_FMT
        "MSI-X vectors supported: %d, no of cores: %d, max_msix_vectors: %d\n",
         ioc->name, ioc->msix_vector_count, ioc->cpu_count, max_msix_vectors);

        entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
            GFP_KERNEL);
        if (!entries) {
                dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "kcalloc "
                    "failed @ at %s:%d/%s() !!!\n", ioc->name, __FILE__,
                    __LINE__, __func__));
                goto try_ioapic;
        }

        for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++)
                a->entry = i;

        r = pci_enable_msix_exact(ioc->pdev, entries, ioc->reply_queue_count);
        if (r) {
                dfailprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "pci_enable_msix_exact failed (r=%d) !!!\n", ioc->name, r));
                kfree(entries);
                goto try_ioapic;
        }

        ioc->msix_enable = 1;
        for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) {
                r = _base_request_irq(ioc, i, a->vector);
                if (r) {
                        _base_free_irq(ioc);
                        _base_disable_msix(ioc);
                        kfree(entries);
                        goto try_ioapic;
                }
        }

        kfree(entries);
        return 0;

/* failback to io_apic interrupt routing */
 try_ioapic:

        ioc->reply_queue_count = 1;
        r = _base_request_irq(ioc, 0, ioc->pdev->irq);

        return r;
}

/**
 * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
 * @ioc: per adapter object
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
{
        struct pci_dev *pdev = ioc->pdev;
        u32 memap_sz;
        u32 pio_sz;
        int i, r = 0;
        u64 pio_chip = 0;
        u64 chip_phys = 0;
        struct adapter_reply_queue *reply_q;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
            ioc->name, __func__));

        ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
        if (pci_enable_device_mem(pdev)) {
                printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
                    "failed\n", ioc->name);
                ioc->bars = 0;
                return -ENODEV;
        }


        if (pci_request_selected_regions(pdev, ioc->bars,
            MPT2SAS_DRIVER_NAME)) {
                printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
                    "failed\n", ioc->name);
                ioc->bars = 0;
                r = -ENODEV;
                goto out_fail;
        }

        /* AER (Advanced Error Reporting) hooks */
        pci_enable_pcie_error_reporting(pdev);

        pci_set_master(pdev);

        if (_base_config_dma_addressing(ioc, pdev) != 0) {
                printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n",
                    ioc->name, pci_name(pdev));
                r = -ENODEV;
                goto out_fail;
        }

        for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
                if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
                        if (pio_sz)
                                continue;
                        pio_chip = (u64)pci_resource_start(pdev, i);
                        pio_sz = pci_resource_len(pdev, i);
                } else {
                        if (memap_sz)
                                continue;
                        /* verify memory resource is valid before using */
                        if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
                                ioc->chip_phys = pci_resource_start(pdev, i);
                                chip_phys = (u64)ioc->chip_phys;
                                memap_sz = pci_resource_len(pdev, i);
                                ioc->chip = ioremap(ioc->chip_phys, memap_sz);
                                if (ioc->chip == NULL) {
                                        printk(MPT2SAS_ERR_FMT "unable to map "
                                            "adapter memory!\n", ioc->name);
                                        r = -EINVAL;
                                        goto out_fail;
                                }
                        }
                }
        }

        _base_mask_interrupts(ioc);

        r = _base_get_ioc_facts(ioc, CAN_SLEEP);
        if (r)
                goto out_fail;

        if (!ioc->rdpq_array_enable_assigned) {
                ioc->rdpq_array_enable = ioc->rdpq_array_capable;
                ioc->rdpq_array_enable_assigned = 1;
        }

        r = _base_enable_msix(ioc);
        if (r)
                goto out_fail;

        list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
                printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
                    reply_q->name,  ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
                    "IO-APIC enabled"), reply_q->vector);

        printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
            ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
        printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
            ioc->name, (unsigned long long)pio_chip, pio_sz);

        /* Save PCI configuration state for recovery from PCI AER/EEH errors */
        pci_save_state(pdev);

        return 0;

 out_fail:
        if (ioc->chip_phys)
                iounmap(ioc->chip);
        ioc->chip_phys = 0;
        pci_release_selected_regions(ioc->pdev, ioc->bars);
        pci_disable_pcie_error_reporting(pdev);
        pci_disable_device(pdev);
        return r;
}

/**
 * mpt2sas_base_get_msg_frame - obtain request mf pointer
 * @ioc: per adapter object
 * @smid: system request message index(smid zero is invalid)
 *
 * Returns virt pointer to message frame.
 */
void *
mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        return (void *)(ioc->request + (smid * ioc->request_sz));
}

/**
 * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Returns virt pointer to sense buffer.
 */
void *
mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
}

/**
 * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Returns phys pointer to the low 32bit address of the sense buffer.
 */
__le32
mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        return cpu_to_le32(ioc->sense_dma +
                        ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
}

/**
 * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
 * @ioc: per adapter object
 * @phys_addr: lower 32 physical addr of the reply
 *
 * Converts 32bit lower physical addr into a virt address.
 */
void *
mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
{
        if (!phys_addr)
                return NULL;
        return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
}

/**
 * mpt2sas_base_get_smid - obtain a free smid from internal queue
 * @ioc: per adapter object
 * @cb_idx: callback index
 *
 * Returns smid (zero is invalid)
 */
u16
mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
{
        unsigned long flags;
        struct request_tracker *request;
        u16 smid;

        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        if (list_empty(&ioc->internal_free_list)) {
                spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
                printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
                    ioc->name, __func__);
                return 0;
        }

        request = list_entry(ioc->internal_free_list.next,
            struct request_tracker, tracker_list);
        request->cb_idx = cb_idx;
        smid = request->smid;
        list_del(&request->tracker_list);
        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
        return smid;
}

/**
 * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
 * @ioc: per adapter object
 * @cb_idx: callback index
 * @scmd: pointer to scsi command object
 *
 * Returns smid (zero is invalid)
 */
u16
mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
    struct scsi_cmnd *scmd)
{
        unsigned long flags;
        struct scsiio_tracker *request;
        u16 smid;

        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        if (list_empty(&ioc->free_list)) {
                spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
                printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
                    ioc->name, __func__);
                return 0;
        }

        request = list_entry(ioc->free_list.next,
            struct scsiio_tracker, tracker_list);
        request->scmd = scmd;
        request->cb_idx = cb_idx;
        smid = request->smid;
        list_del(&request->tracker_list);
        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
        return smid;
}

/**
 * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
 * @ioc: per adapter object
 * @cb_idx: callback index
 *
 * Returns smid (zero is invalid)
 */
u16
mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
{
        unsigned long flags;
        struct request_tracker *request;
        u16 smid;

        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        if (list_empty(&ioc->hpr_free_list)) {
                spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
                return 0;
        }

        request = list_entry(ioc->hpr_free_list.next,
            struct request_tracker, tracker_list);
        request->cb_idx = cb_idx;
        smid = request->smid;
        list_del(&request->tracker_list);
        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
        return smid;
}


/**
 * mpt2sas_base_free_smid - put smid back on free_list
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Return nothing.
 */
void
mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        unsigned long flags;
        int i;
        struct chain_tracker *chain_req, *next;

        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        if (smid < ioc->hi_priority_smid) {
                /* scsiio queue */
                i = smid - 1;
                if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
                        list_for_each_entry_safe(chain_req, next,
                            &ioc->scsi_lookup[i].chain_list, tracker_list) {
                                list_del_init(&chain_req->tracker_list);
                                list_add(&chain_req->tracker_list,
                                    &ioc->free_chain_list);
                        }
                }
                ioc->scsi_lookup[i].cb_idx = 0xFF;
                ioc->scsi_lookup[i].scmd = NULL;
                ioc->scsi_lookup[i].direct_io = 0;
                list_add(&ioc->scsi_lookup[i].tracker_list,
                    &ioc->free_list);
                spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);

                /*
                 * See _wait_for_commands_to_complete() call with regards
                 * to this code.
                 */
                if (ioc->shost_recovery && ioc->pending_io_count) {
                        if (ioc->pending_io_count == 1)
                                wake_up(&ioc->reset_wq);
                        ioc->pending_io_count--;
                }
                return;
        } else if (smid < ioc->internal_smid) {
                /* hi-priority */
                i = smid - ioc->hi_priority_smid;
                ioc->hpr_lookup[i].cb_idx = 0xFF;
                list_add(&ioc->hpr_lookup[i].tracker_list,
                    &ioc->hpr_free_list);
        } else if (smid <= ioc->hba_queue_depth) {
                /* internal queue */
                i = smid - ioc->internal_smid;
                ioc->internal_lookup[i].cb_idx = 0xFF;
                list_add(&ioc->internal_lookup[i].tracker_list,
                    &ioc->internal_free_list);
        }
        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
}

/**
 * _base_writeq - 64 bit write to MMIO
 * @ioc: per adapter object
 * @b: data payload
 * @addr: address in MMIO space
 * @writeq_lock: spin lock
 *
 * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
 * care of 32 bit environment where its not quarenteed to send the entire word
 * in one transfer.
 */
#ifndef writeq
static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
    spinlock_t *writeq_lock)
{
        unsigned long flags;
        __u64 data_out = cpu_to_le64(b);

        spin_lock_irqsave(writeq_lock, flags);
        writel((u32)(data_out), addr);
        writel((u32)(data_out >> 32), (addr + 4));
        spin_unlock_irqrestore(writeq_lock, flags);
}
#else
static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
    spinlock_t *writeq_lock)
{
        writeq(cpu_to_le64(b), addr);
}
#endif

static inline u8
_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
{
        return ioc->cpu_msix_table[raw_smp_processor_id()];
}

/**
 * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
 * @ioc: per adapter object
 * @smid: system request message index
 * @handle: device handle
 *
 * Return nothing.
 */
void
mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
{
        Mpi2RequestDescriptorUnion_t descriptor;
        u64 *request = (u64 *)&descriptor;


        descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
        descriptor.SCSIIO.MSIxIndex =  _base_get_msix_index(ioc);
        descriptor.SCSIIO.SMID = cpu_to_le16(smid);
        descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
        descriptor.SCSIIO.LMID = 0;
        _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
            &ioc->scsi_lookup_lock);
}


/**
 * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Return nothing.
 */
void
mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        Mpi2RequestDescriptorUnion_t descriptor;
        u64 *request = (u64 *)&descriptor;

        descriptor.HighPriority.RequestFlags =
            MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
        descriptor.HighPriority.MSIxIndex =  0;
        descriptor.HighPriority.SMID = cpu_to_le16(smid);
        descriptor.HighPriority.LMID = 0;
        descriptor.HighPriority.Reserved1 = 0;
        _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
            &ioc->scsi_lookup_lock);
}

/**
 * mpt2sas_base_put_smid_default - Default, primarily used for config pages
 * @ioc: per adapter object
 * @smid: system request message index
 *
 * Return nothing.
 */
void
mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
        Mpi2RequestDescriptorUnion_t descriptor;
        u64 *request = (u64 *)&descriptor;

        descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
        descriptor.Default.MSIxIndex =  _base_get_msix_index(ioc);
        descriptor.Default.SMID = cpu_to_le16(smid);
        descriptor.Default.LMID = 0;
        descriptor.Default.DescriptorTypeDependent = 0;
        _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
            &ioc->scsi_lookup_lock);
}

/**
 * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
 * @ioc: per adapter object
 * @smid: system request message index
 * @io_index: value used to track the IO
 *
 * Return nothing.
 */
void
mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
    u16 io_index)
{
        Mpi2RequestDescriptorUnion_t descriptor;
        u64 *request = (u64 *)&descriptor;

        descriptor.SCSITarget.RequestFlags =
            MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
        descriptor.SCSITarget.MSIxIndex =  _base_get_msix_index(ioc);
        descriptor.SCSITarget.SMID = cpu_to_le16(smid);
        descriptor.SCSITarget.LMID = 0;
        descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
        _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
            &ioc->scsi_lookup_lock);
}

/**
 * _base_display_dell_branding - Disply branding string
 * @ioc: per adapter object
 *
 * Return nothing.
 */
static void
_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
{
        char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];

        if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
                return;

        memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
        switch (ioc->pdev->subsystem_device) {
        case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
                strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
                strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
                strncpy(dell_branding,
                    MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
                strncpy(dell_branding,
                    MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
                strncpy(dell_branding,
                    MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_PERC_H200_SSDID:
                strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        case MPT2SAS_DELL_6GBPS_SAS_SSDID:
                strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
                    MPT2SAS_DELL_BRANDING_SIZE - 1);
                break;
        default:
                sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
                break;
        }

        printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
            " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
            ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
            ioc->pdev->subsystem_device);
}

/**
 * _base_display_intel_branding - Display branding string
 * @ioc: per adapter object
 *
 * Return nothing.
 */
static void
_base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
{
        if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
                return;

        switch (ioc->pdev->device) {
        case MPI2_MFGPAGE_DEVID_SAS2008:
                switch (ioc->pdev->subsystem_device) {
                case MPT2SAS_INTEL_RMS2LL080_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS2LL080_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS2LL040_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS2LL040_BRANDING);
                        break;
                case MPT2SAS_INTEL_SSD910_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_SSD910_BRANDING);
                        break;
                default:
                        break;
                }
        case MPI2_MFGPAGE_DEVID_SAS2308_2:
                switch (ioc->pdev->subsystem_device) {
                case MPT2SAS_INTEL_RS25GB008_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RS25GB008_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25JB080_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25JB080_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25JB040_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25JB040_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25KB080_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25KB080_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25KB040_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25KB040_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25LB040_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25LB040_BRANDING);
                        break;
                case MPT2SAS_INTEL_RMS25LB080_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_INTEL_RMS25LB080_BRANDING);
                        break;
                default:
                        break;
                }
        default:
                break;
        }
}

/**
 * _base_display_hp_branding - Display branding string
 * @ioc: per adapter object
 *
 * Return nothing.
 */
static void
_base_display_hp_branding(struct MPT2SAS_ADAPTER *ioc)
{
        if (ioc->pdev->subsystem_vendor != MPT2SAS_HP_3PAR_SSVID)
                return;

        switch (ioc->pdev->device) {
        case MPI2_MFGPAGE_DEVID_SAS2004:
                switch (ioc->pdev->subsystem_device) {
                case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
                        break;
                default:
                        break;
                }
        case MPI2_MFGPAGE_DEVID_SAS2308_2:
                switch (ioc->pdev->subsystem_device) {
                case MPT2SAS_HP_2_4_INTERNAL_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_HP_2_4_INTERNAL_BRANDING);
                        break;
                case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
                        break;
                case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
                        break;
                case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
                        printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
                            MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
                        break;
                default:
                        break;
                }
        default:
                break;
        }
}

/**
 * _base_display_ioc_capabilities - Disply IOC's capabilities.
 * @ioc: per adapter object
 *
 * Return nothing.
 */
static void
_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
{
        int i = 0;
        char desc[16];
        u32 iounit_pg1_flags;
        u32 bios_version;

        bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
        strncpy(desc, ioc->manu_pg0.ChipName, 16);
        printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
           "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
            ioc->name, desc,
           (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
           (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
           (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
           ioc->facts.FWVersion.Word & 0x000000FF,
           ioc->pdev->revision,
           (bios_version & 0xFF000000) >> 24,
           (bios_version & 0x00FF0000) >> 16,
           (bios_version & 0x0000FF00) >> 8,
            bios_version & 0x000000FF);

        _base_display_dell_branding(ioc);
        _base_display_intel_branding(ioc);
        _base_display_hp_branding(ioc);

        printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);

        if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
                printk("Initiator");
                i++;
        }

        if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
                printk("%sTarget", i ? "," : "");
                i++;
        }

        i = 0;
        printk("), ");
        printk("Capabilities=(");

        if (!ioc->hide_ir_msg) {
                if (ioc->facts.IOCCapabilities &
                    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
                        printk("Raid");
                        i++;
                }
        }

        if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
                printk("%sTLR", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
                printk("%sMulticast", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
                printk("%sBIDI Target", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
                printk("%sEEDP", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
                printk("%sSnapshot Buffer", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
                printk("%sDiag Trace Buffer", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
                printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : "");
                i++;
        }

        if (ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
                printk("%sTask Set Full", i ? "," : "");
                i++;
        }

        iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
        if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
                printk("%sNCQ", i ? "," : "");
                i++;
        }

        printk(")\n");
}

/**
 * mpt2sas_base_update_missing_delay - change the missing delay timers
 * @ioc: per adapter object
 * @device_missing_delay: amount of time till device is reported missing
 * @io_missing_delay: interval IO is returned when there is a missing device
 *
 * Return nothing.
 *
 * Passed on the command line, this function will modify the device missing
 * delay, as well as the io missing delay. This should be called at driver
 * load time.
 */
void
mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
        u16 device_missing_delay, u8 io_missing_delay)
{
        u16 dmd, dmd_new, dmd_orignal;
        u8 io_missing_delay_original;
        u16 sz;
        Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
        Mpi2ConfigReply_t mpi_reply;
        u8 num_phys = 0;
        u16 ioc_status;

        mpt2sas_config_get_number_hba_phys(ioc, &num_phys);
        if (!num_phys)
                return;

        sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
            sizeof(Mpi2SasIOUnit1PhyData_t));
        sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
        if (!sas_iounit_pg1) {
                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
                    ioc->name, __FILE__, __LINE__, __func__);
                goto out;
        }
        if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
            sas_iounit_pg1, sz))) {
                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
                    ioc->name, __FILE__, __LINE__, __func__);
                goto out;
        }
        ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
            MPI2_IOCSTATUS_MASK;
        if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
                    ioc->name, __FILE__, __LINE__, __func__);
                goto out;
        }

        /* device missing delay */
        dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
        if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
                dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
        else
                dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
        dmd_orignal = dmd;
        if (device_missing_delay > 0x7F) {
                dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
                    device_missing_delay;
                dmd = dmd / 16;
                dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
        } else
                dmd = device_missing_delay;
        sas_iounit_pg1->ReportDeviceMissingDelay = dmd;

        /* io missing delay */
        io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
        sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;

        if (!mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
            sz)) {
                if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
                        dmd_new = (dmd &
                            MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
                else
                        dmd_new =
                    dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
                printk(MPT2SAS_INFO_FMT "device_missing_delay: old(%d), "
                    "new(%d)\n", ioc->name, dmd_orignal, dmd_new);
                printk(MPT2SAS_INFO_FMT "ioc_missing_delay: old(%d), "
                    "new(%d)\n", ioc->name, io_missing_delay_original,
                    io_missing_delay);
                ioc->device_missing_delay = dmd_new;
                ioc->io_missing_delay = io_missing_delay;
        }

out:
        kfree(sas_iounit_pg1);
}

/**
 * _base_static_config_pages - static start of day config pages
 * @ioc: per adapter object
 *
 * Return nothing.
 */
static void
_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
{
        Mpi2ConfigReply_t mpi_reply;
        u32 iounit_pg1_flags;

        mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
        if (ioc->ir_firmware)
                mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
                    &ioc->manu_pg10);
        mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
        mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
        mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
        mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
        mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
        mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
        _base_display_ioc_capabilities(ioc);

        /*
         * Enable task_set_full handling in iounit_pg1 when the
         * facts capabilities indicate that its supported.
         */
        iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
        if ((ioc->facts.IOCCapabilities &
            MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
                iounit_pg1_flags &=
                    ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
        else
                iounit_pg1_flags |=
                    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
        ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
        mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);

        if (ioc->iounit_pg8.NumSensors)
                ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
}

/**
 * _base_release_memory_pools - release memory
 * @ioc: per adapter object
 *
 * Free memory allocated from _base_allocate_memory_pools.
 *
 * Return nothing.
 */
static void
_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
{
        int i = 0;
        struct reply_post_struct *rps;

        dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        if (ioc->request) {
                pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
                    ioc->request,  ioc->request_dma);
                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)"
                    ": free\n", ioc->name, ioc->request));
                ioc->request = NULL;
        }

        if (ioc->sense) {
                pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
                if (ioc->sense_dma_pool)
                        pci_pool_destroy(ioc->sense_dma_pool);
                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)"
                    ": free\n", ioc->name, ioc->sense));
                ioc->sense = NULL;
        }

        if (ioc->reply) {
                pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
                if (ioc->reply_dma_pool)
                        pci_pool_destroy(ioc->reply_dma_pool);
                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)"
                     ": free\n", ioc->name, ioc->reply));
                ioc->reply = NULL;
        }

        if (ioc->reply_free) {
                pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
                    ioc->reply_free_dma);
                if (ioc->reply_free_dma_pool)
                        pci_pool_destroy(ioc->reply_free_dma_pool);
                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool"
                    "(0x%p): free\n", ioc->name, ioc->reply_free));
                ioc->reply_free = NULL;
        }

        if (ioc->reply_post) {
                do {
                        rps = &ioc->reply_post[i];
                        if (rps->reply_post_free) {
                                pci_pool_free(
                                    ioc->reply_post_free_dma_pool,
                                    rps->reply_post_free,
                                    rps->reply_post_free_dma);
                                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
                                    "reply_post_free_pool(0x%p): free\n",
                                    ioc->name, rps->reply_post_free));
                                rps->reply_post_free = NULL;
                        }
                } while (ioc->rdpq_array_enable &&
                           (++i < ioc->reply_queue_count));

                if (ioc->reply_post_free_dma_pool)
                        pci_pool_destroy(ioc->reply_post_free_dma_pool);
                kfree(ioc->reply_post);
        }

        if (ioc->config_page) {
                dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "config_page(0x%p): free\n", ioc->name,
                    ioc->config_page));
                pci_free_consistent(ioc->pdev, ioc->config_page_sz,
                    ioc->config_page, ioc->config_page_dma);
        }

        if (ioc->scsi_lookup) {
                free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
                ioc->scsi_lookup = NULL;
        }
        kfree(ioc->hpr_lookup);
        kfree(ioc->internal_lookup);
        if (ioc->chain_lookup) {
                for (i = 0; i < ioc->chain_depth; i++) {
                        if (ioc->chain_lookup[i].chain_buffer)
                                pci_pool_free(ioc->chain_dma_pool,
                                    ioc->chain_lookup[i].chain_buffer,
                                    ioc->chain_lookup[i].chain_buffer_dma);
                }
                if (ioc->chain_dma_pool)
                        pci_pool_destroy(ioc->chain_dma_pool);
                free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
                ioc->chain_lookup = NULL;
        }
}


/**
 * _base_allocate_memory_pools - allocate start of day memory pools
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 success, anything else error
 */
static int
_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
{
        struct mpt2sas_facts *facts;
        u16 max_sge_elements;
        u16 chains_needed_per_io;
        u32 sz, total_sz, reply_post_free_sz;
        u32 retry_sz;
        u16 max_request_credit;
        int i;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        retry_sz = 0;
        facts = &ioc->facts;

        /* command line tunables  for max sgl entries */
        if (max_sgl_entries != -1) {
                ioc->shost->sg_tablesize =  min_t(unsigned short,
                             max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS);
                if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH)
                        printk(MPT2SAS_WARN_FMT
                         "sg_tablesize(%u) is bigger than kernel defined"
                         " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
                          ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH);
        } else {
                ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
        }

        /* command line tunables  for max controller queue depth */
        if (max_queue_depth != -1 && max_queue_depth != 0) {
                max_request_credit = min_t(u16, max_queue_depth +
                        ioc->hi_priority_depth + ioc->internal_depth,
                        facts->RequestCredit);
                if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
                        max_request_credit =  MAX_HBA_QUEUE_DEPTH;
        } else
                max_request_credit = min_t(u16, facts->RequestCredit,
                    MAX_HBA_QUEUE_DEPTH);

        ioc->hba_queue_depth = max_request_credit;
        ioc->hi_priority_depth = facts->HighPriorityCredit;
        ioc->internal_depth = ioc->hi_priority_depth + 5;

        /* request frame size */
        ioc->request_sz = facts->IOCRequestFrameSize * 4;

        /* reply frame size */
        ioc->reply_sz = facts->ReplyFrameSize * 4;

 retry_allocation:
        total_sz = 0;
        /* calculate number of sg elements left over in the 1st frame */
        max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
            sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size);
        ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size;

        /* now do the same for a chain buffer */
        max_sge_elements = ioc->request_sz - ioc->sge_size;
        ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size;

        ioc->chain_offset_value_for_main_message =
            ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) +
             (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4;

        /*
         *  MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
         */
        chains_needed_per_io = ((ioc->shost->sg_tablesize -
           ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
            + 1;
        if (chains_needed_per_io > facts->MaxChainDepth) {
                chains_needed_per_io = facts->MaxChainDepth;
                ioc->shost->sg_tablesize = min_t(u16,
                ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
                * chains_needed_per_io), ioc->shost->sg_tablesize);
        }
        ioc->chains_needed_per_io = chains_needed_per_io;

        /* reply free queue sizing - taking into account for 64 FW events */
        ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;

        /* calculate reply descriptor post queue depth */
        ioc->reply_post_queue_depth = ioc->hba_queue_depth +
                                        ioc->reply_free_queue_depth +  1;
        /* align the reply post queue on the next 16 count boundary */
        if (ioc->reply_post_queue_depth % 16)
                ioc->reply_post_queue_depth += 16 -
                        (ioc->reply_post_queue_depth % 16);


        if (ioc->reply_post_queue_depth >
            facts->MaxReplyDescriptorPostQueueDepth) {
                ioc->reply_post_queue_depth =
                        facts->MaxReplyDescriptorPostQueueDepth -
                    (facts->MaxReplyDescriptorPostQueueDepth % 16);
                ioc->hba_queue_depth =
                        ((ioc->reply_post_queue_depth - 64) / 2) - 1;
                ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
        }

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
            "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
            "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
            ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
            ioc->chains_needed_per_io));

        /* reply post queue, 16 byte align */
        reply_post_free_sz = ioc->reply_post_queue_depth *
            sizeof(Mpi2DefaultReplyDescriptor_t);

        sz = reply_post_free_sz;
        if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
                sz *= ioc->reply_queue_count;

        ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
            (ioc->reply_queue_count):1,
            sizeof(struct reply_post_struct), GFP_KERNEL);

        if (!ioc->reply_post) {
                printk(MPT2SAS_ERR_FMT "reply_post_free pool: kcalloc failed\n",
                        ioc->name);
                goto out;
        }
        ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
            ioc->pdev, sz, 16, 0);
        if (!ioc->reply_post_free_dma_pool) {
                printk(MPT2SAS_ERR_FMT
                 "reply_post_free pool: pci_pool_create failed\n",
                 ioc->name);
                goto out;
        }
        i = 0;
        do {
                ioc->reply_post[i].reply_post_free =
                    pci_pool_alloc(ioc->reply_post_free_dma_pool,
                    GFP_KERNEL,
                    &ioc->reply_post[i].reply_post_free_dma);
                if (!ioc->reply_post[i].reply_post_free) {
                        printk(MPT2SAS_ERR_FMT
                        "reply_post_free pool: pci_pool_alloc failed\n",
                        ioc->name);
                        goto out;
                }
                memset(ioc->reply_post[i].reply_post_free, 0, sz);
                dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "reply post free pool (0x%p): depth(%d),"
                    "element_size(%d), pool_size(%d kB)\n", ioc->name,
                    ioc->reply_post[i].reply_post_free,
                    ioc->reply_post_queue_depth, 8, sz/1024));
                dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "reply_post_free_dma = (0x%llx)\n", ioc->name,
                    (unsigned long long)
                    ioc->reply_post[i].reply_post_free_dma));
                total_sz += sz;
        } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));

        if (ioc->dma_mask == 64) {
                if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
                        printk(MPT2SAS_WARN_FMT
                            "no suitable consistent DMA mask for %s\n",
                            ioc->name, pci_name(ioc->pdev));
                        goto out;
                }
        }

        ioc->scsiio_depth = ioc->hba_queue_depth -
            ioc->hi_priority_depth - ioc->internal_depth;

        /* set the scsi host can_queue depth
         * with some internal commands that could be outstanding
         */
        ioc->shost->can_queue = ioc->scsiio_depth;
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
            "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));

        /* contiguous pool for request and chains, 16 byte align, one extra "
         * "frame for smid=0
         */
        ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
        sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);

        /* hi-priority queue */
        sz += (ioc->hi_priority_depth * ioc->request_sz);

        /* internal queue */
        sz += (ioc->internal_depth * ioc->request_sz);

        ioc->request_dma_sz = sz;
        ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
        if (!ioc->request) {
                printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
                    "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
                    "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
                    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
                if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
                        goto out;
                retry_sz += 64;
                ioc->hba_queue_depth = max_request_credit - retry_sz;
                goto retry_allocation;
        }

        if (retry_sz)
                printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
                    "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
                    "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
                    ioc->chains_needed_per_io, ioc->request_sz, sz/1024);


        /* hi-priority queue */
        ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
            ioc->request_sz);
        ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
            ioc->request_sz);

        /* internal queue */
        ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
            ioc->request_sz);
        ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
            ioc->request_sz);


        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
            "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
            ioc->request, ioc->hba_queue_depth, ioc->request_sz,
            (ioc->hba_queue_depth * ioc->request_sz)/1024));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
            ioc->name, (unsigned long long) ioc->request_dma));
        total_sz += sz;

        sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
        ioc->scsi_lookup_pages = get_order(sz);
        ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
            GFP_KERNEL, ioc->scsi_lookup_pages);
        if (!ioc->scsi_lookup) {
                printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, "
                    "sz(%d)\n", ioc->name, (int)sz);
                goto out;
        }

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
            "depth(%d)\n", ioc->name, ioc->request,
            ioc->scsiio_depth));

        ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
        sz = ioc->chain_depth * sizeof(struct chain_tracker);
        ioc->chain_pages = get_order(sz);

        ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
            GFP_KERNEL, ioc->chain_pages);
        if (!ioc->chain_lookup) {
                printk(MPT2SAS_ERR_FMT "chain_lookup: get_free_pages failed, "
                    "sz(%d)\n", ioc->name, (int)sz);
                goto out;
        }
        ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
            ioc->request_sz, 16, 0);
        if (!ioc->chain_dma_pool) {
                printk(MPT2SAS_ERR_FMT "chain_dma_pool: pci_pool_create "
                    "failed\n", ioc->name);
                goto out;
        }
        for (i = 0; i < ioc->chain_depth; i++) {
                ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
                    ioc->chain_dma_pool , GFP_KERNEL,
                    &ioc->chain_lookup[i].chain_buffer_dma);
                if (!ioc->chain_lookup[i].chain_buffer) {
                        ioc->chain_depth = i;
                        goto chain_done;
                }
                total_sz += ioc->request_sz;
        }
chain_done:
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool depth"
            "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
            ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
            ioc->request_sz))/1024));

        /* initialize hi-priority queue smid's */
        ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
            sizeof(struct request_tracker), GFP_KERNEL);
        if (!ioc->hpr_lookup) {
                printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
                    ioc->name);
                goto out;
        }
        ioc->hi_priority_smid = ioc->scsiio_depth + 1;
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
            "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
            ioc->hi_priority_depth, ioc->hi_priority_smid));

        /* initialize internal queue smid's */
        ioc->internal_lookup = kcalloc(ioc->internal_depth,
            sizeof(struct request_tracker), GFP_KERNEL);
        if (!ioc->internal_lookup) {
                printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
                    ioc->name);
                goto out;
        }
        ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
            "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
             ioc->internal_depth, ioc->internal_smid));

        /* sense buffers, 4 byte align */
        sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
        ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
            0);
        if (!ioc->sense_dma_pool) {
                printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n",
                    ioc->name);
                goto out;
        }
        ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
            &ioc->sense_dma);
        if (!ioc->sense) {
                printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n",
                    ioc->name);
                goto out;
        }
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
            "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
            "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
            SCSI_SENSE_BUFFERSIZE, sz/1024));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
            ioc->name, (unsigned long long)ioc->sense_dma));
        total_sz += sz;

        /* reply pool, 4 byte align */
        sz = ioc->reply_free_queue_depth * ioc->reply_sz;
        ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
            0);
        if (!ioc->reply_dma_pool) {
                printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n",
                    ioc->name);
                goto out;
        }
        ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
            &ioc->reply_dma);
        if (!ioc->reply) {
                printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n",
                    ioc->name);
                goto out;
        }
        ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
        ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
            "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
            ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n",
            ioc->name, (unsigned long long)ioc->reply_dma));
        total_sz += sz;

        /* reply free queue, 16 byte align */
        sz = ioc->reply_free_queue_depth * 4;
        ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
            ioc->pdev, sz, 16, 0);
        if (!ioc->reply_free_dma_pool) {
                printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create "
                    "failed\n", ioc->name);
                goto out;
        }
        ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
            &ioc->reply_free_dma);
        if (!ioc->reply_free) {
                printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc "
                    "failed\n", ioc->name);
                goto out;
        }
        memset(ioc->reply_free, 0, sz);
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): "
            "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
            ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma"
            "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
        total_sz += sz;

        ioc->config_page_sz = 512;
        ioc->config_page = pci_alloc_consistent(ioc->pdev,
            ioc->config_page_sz, &ioc->config_page_dma);
        if (!ioc->config_page) {
                printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc "
                    "failed\n", ioc->name);
                goto out;
        }
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
            "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
            "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
        total_sz += ioc->config_page_sz;

        printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
            ioc->name, total_sz/1024);
        printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
            "Max Controller Queue Depth(%d)\n",
            ioc->name, ioc->shost->can_queue, facts->RequestCredit);
        printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
            ioc->name, ioc->shost->sg_tablesize);
        return 0;

 out:
        return -ENOMEM;
}


/**
 * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
 * @ioc: Pointer to MPT_ADAPTER structure
 * @cooked: Request raw or cooked IOC state
 *
 * Returns all IOC Doorbell register bits if cooked==0, else just the
 * Doorbell bits in MPI_IOC_STATE_MASK.
 */
u32
mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked)
{
        u32 s, sc;

        s = readl(&ioc->chip->Doorbell);
        sc = s & MPI2_IOC_STATE_MASK;
        return cooked ? sc : s;
}

/**
 * _base_wait_on_iocstate - waiting on a particular ioc state
 * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
    int sleep_flag)
{
        u32 count, cntdn;
        u32 current_state;

        count = 0;
        cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
        do {
                current_state = mpt2sas_base_get_iocstate(ioc, 1);
                if (current_state == ioc_state)
                        return 0;
                if (count && current_state == MPI2_IOC_STATE_FAULT)
                        break;
                if (sleep_flag == CAN_SLEEP)
                        msleep(1);
                else
                        udelay(500);
                count++;
        } while (--cntdn);

        return current_state;
}

/**
 * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
 * a write to the doorbell)
 * @ioc: per adapter object
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 *
 * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
 */
static int
_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
    int sleep_flag)
{
        u32 cntdn, count;
        u32 int_status;

        count = 0;
        cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
        do {
                int_status = readl(&ioc->chip->HostInterruptStatus);
                if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
                        dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                            "successful count(%d), timeout(%d)\n", ioc->name,
                            __func__, count, timeout));
                        return 0;
                }
                if (sleep_flag == CAN_SLEEP)
                        msleep(1);
                else
                        udelay(500);
                count++;
        } while (--cntdn);

        printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
            "int_status(%x)!\n", ioc->name, __func__, count, int_status);
        return -EFAULT;
}

/**
 * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
 * @ioc: per adapter object
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 *
 * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
 * doorbell.
 */
static int
_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
    int sleep_flag)
{
        u32 cntdn, count;
        u32 int_status;
        u32 doorbell;

        count = 0;
        cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
        do {
                int_status = readl(&ioc->chip->HostInterruptStatus);
                if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
                        dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                            "successful count(%d), timeout(%d)\n", ioc->name,
                            __func__, count, timeout));
                        return 0;
                } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
                        doorbell = readl(&ioc->chip->Doorbell);
                        if ((doorbell & MPI2_IOC_STATE_MASK) ==
                            MPI2_IOC_STATE_FAULT) {
                                mpt2sas_base_fault_info(ioc , doorbell);
                                return -EFAULT;
                        }
                } else if (int_status == 0xFFFFFFFF)
                        goto out;

                if (sleep_flag == CAN_SLEEP)
                        msleep(1);
                else
                        udelay(500);
                count++;
        } while (--cntdn);

 out:
        printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
            "int_status(%x)!\n", ioc->name, __func__, count, int_status);
        return -EFAULT;
}

/**
 * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
 * @ioc: per adapter object
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 *
 */
static int
_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
    int sleep_flag)
{
        u32 cntdn, count;
        u32 doorbell_reg;

        count = 0;
        cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
        do {
                doorbell_reg = readl(&ioc->chip->Doorbell);
                if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
                        dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                            "successful count(%d), timeout(%d)\n", ioc->name,
                            __func__, count, timeout));
                        return 0;
                }
                if (sleep_flag == CAN_SLEEP)
                        msleep(1);
                else
                        udelay(500);
                count++;
        } while (--cntdn);

        printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
            "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
        return -EFAULT;
}

/**
 * _base_send_ioc_reset - send doorbell reset
 * @ioc: per adapter object
 * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
    int sleep_flag)
{
        u32 ioc_state;
        int r = 0;

        if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
                printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n",
                    ioc->name, __func__);
                return -EFAULT;
        }

        if (!(ioc->facts.IOCCapabilities &
           MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
                return -EFAULT;

        printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name);

        writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
            &ioc->chip->Doorbell);
        if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
                r = -EFAULT;
                goto out;
        }
        ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
            timeout, sleep_flag);
        if (ioc_state) {
                printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
                    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
                r = -EFAULT;
                goto out;
        }
 out:
        printk(MPT2SAS_INFO_FMT "message unit reset: %s\n",
            ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
        return r;
}

/**
 * _base_handshake_req_reply_wait - send request thru doorbell interface
 * @ioc: per adapter object
 * @request_bytes: request length
 * @request: pointer having request payload
 * @reply_bytes: reply length
 * @reply: pointer to reply payload
 * @timeout: timeout in second
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
    u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
{
        MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
        int i;
        u8 failed;
        u16 dummy;
        __le32 *mfp;

        /* make sure doorbell is not in use */
        if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
                printk(MPT2SAS_ERR_FMT "doorbell is in use "
                    " (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }

        /* clear pending doorbell interrupts from previous state changes */
        if (readl(&ioc->chip->HostInterruptStatus) &
            MPI2_HIS_IOC2SYS_DB_STATUS)
                writel(0, &ioc->chip->HostInterruptStatus);

        /* send message to ioc */
        writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
            ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
            &ioc->chip->Doorbell);

        if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
                printk(MPT2SAS_ERR_FMT "doorbell handshake "
                   "int failed (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }
        writel(0, &ioc->chip->HostInterruptStatus);

        if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
                printk(MPT2SAS_ERR_FMT "doorbell handshake "
                    "ack failed (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }

        /* send message 32-bits at a time */
        for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
                writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
                if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
                        failed = 1;
        }

        if (failed) {
                printk(MPT2SAS_ERR_FMT "doorbell handshake "
                    "sending request failed (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }

        /* now wait for the reply */
        if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
                printk(MPT2SAS_ERR_FMT "doorbell handshake "
                   "int failed (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }

        /* read the first two 16-bits, it gives the total length of the reply */
        reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
            & MPI2_DOORBELL_DATA_MASK);
        writel(0, &ioc->chip->HostInterruptStatus);
        if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
                printk(MPT2SAS_ERR_FMT "doorbell handshake "
                   "int failed (line=%d)\n", ioc->name, __LINE__);
                return -EFAULT;
        }
        reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
            & MPI2_DOORBELL_DATA_MASK);
        writel(0, &ioc->chip->HostInterruptStatus);

        for (i = 2; i < default_reply->MsgLength * 2; i++)  {
                if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
                        printk(MPT2SAS_ERR_FMT "doorbell "
                            "handshake int failed (line=%d)\n", ioc->name,
                            __LINE__);
                        return -EFAULT;
                }
                if (i >=  reply_bytes/2) /* overflow case */
                        dummy = readl(&ioc->chip->Doorbell);
                else
                        reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
                            & MPI2_DOORBELL_DATA_MASK);
                writel(0, &ioc->chip->HostInterruptStatus);
        }

        _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
        if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
                dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
                    " (line=%d)\n", ioc->name, __LINE__));
        }
        writel(0, &ioc->chip->HostInterruptStatus);

        if (ioc->logging_level & MPT_DEBUG_INIT) {
                mfp = (__le32 *)reply;
                printk(KERN_INFO "\toffset:data\n");
                for (i = 0; i < reply_bytes/4; i++)
                        printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
                            le32_to_cpu(mfp[i]));
        }
        return 0;
}

/**
 * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
 * @ioc: per adapter object
 * @mpi_reply: the reply payload from FW
 * @mpi_request: the request payload sent to FW
 *
 * The SAS IO Unit Control Request message allows the host to perform low-level
 * operations, such as resets on the PHYs of the IO Unit, also allows the host
 * to obtain the IOC assigned device handles for a device if it has other
 * identifying information about the device, in addition allows the host to
 * remove IOC resources associated with the device.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
    Mpi2SasIoUnitControlReply_t *mpi_reply,
    Mpi2SasIoUnitControlRequest_t *mpi_request)
{
        u16 smid;
        u32 ioc_state;
        unsigned long timeleft;
        bool issue_reset = false;
        int rc;
        void *request;
        u16 wait_state_count;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        mutex_lock(&ioc->base_cmds.mutex);

        if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
                printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
                    ioc->name, __func__);
                rc = -EAGAIN;
                goto out;
        }

        wait_state_count = 0;
        ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
        while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
                if (wait_state_count++ == 10) {
                        printk(MPT2SAS_ERR_FMT
                            "%s: failed due to ioc not operational\n",
                            ioc->name, __func__);
                        rc = -EFAULT;
                        goto out;
                }
                ssleep(1);
                ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
                printk(MPT2SAS_INFO_FMT "%s: waiting for "
                    "operational state(count=%d)\n", ioc->name,
                    __func__, wait_state_count);
        }

        smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                rc = -EAGAIN;
                goto out;
        }

        rc = 0;
        ioc->base_cmds.status = MPT2_CMD_PENDING;
        request = mpt2sas_base_get_msg_frame(ioc, smid);
        ioc->base_cmds.smid = smid;
        memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
        if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
            mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
                ioc->ioc_link_reset_in_progress = 1;
        init_completion(&ioc->base_cmds.done);
        mpt2sas_base_put_smid_default(ioc, smid);
        timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
            msecs_to_jiffies(10000));
        if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
            mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
            ioc->ioc_link_reset_in_progress)
                ioc->ioc_link_reset_in_progress = 0;
        if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
                printk(MPT2SAS_ERR_FMT "%s: timeout\n",
                    ioc->name, __func__);
                _debug_dump_mf(mpi_request,
                    sizeof(Mpi2SasIoUnitControlRequest_t)/4);
                if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
                        issue_reset = true;
                goto issue_host_reset;
        }
        if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
                memcpy(mpi_reply, ioc->base_cmds.reply,
                    sizeof(Mpi2SasIoUnitControlReply_t));
        else
                memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;
        goto out;

 issue_host_reset:
        if (issue_reset)
                mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
                    FORCE_BIG_HAMMER);
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;
        rc = -EFAULT;
 out:
        mutex_unlock(&ioc->base_cmds.mutex);
        return rc;
}


/**
 * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
 * @ioc: per adapter object
 * @mpi_reply: the reply payload from FW
 * @mpi_request: the request payload sent to FW
 *
 * The SCSI Enclosure Processor request message causes the IOC to
 * communicate with SES devices to control LED status signals.
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
    Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
{
        u16 smid;
        u32 ioc_state;
        unsigned long timeleft;
        bool issue_reset = false;
        int rc;
        void *request;
        u16 wait_state_count;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        mutex_lock(&ioc->base_cmds.mutex);

        if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
                printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
                    ioc->name, __func__);
                rc = -EAGAIN;
                goto out;
        }

        wait_state_count = 0;
        ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
        while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
                if (wait_state_count++ == 10) {
                        printk(MPT2SAS_ERR_FMT
                            "%s: failed due to ioc not operational\n",
                            ioc->name, __func__);
                        rc = -EFAULT;
                        goto out;
                }
                ssleep(1);
                ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
                printk(MPT2SAS_INFO_FMT "%s: waiting for "
                    "operational state(count=%d)\n", ioc->name,
                    __func__, wait_state_count);
        }

        smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                rc = -EAGAIN;
                goto out;
        }

        rc = 0;
        ioc->base_cmds.status = MPT2_CMD_PENDING;
        request = mpt2sas_base_get_msg_frame(ioc, smid);
        ioc->base_cmds.smid = smid;
        memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
        init_completion(&ioc->base_cmds.done);
        mpt2sas_base_put_smid_default(ioc, smid);
        timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
            msecs_to_jiffies(10000));
        if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
                printk(MPT2SAS_ERR_FMT "%s: timeout\n",
                    ioc->name, __func__);
                _debug_dump_mf(mpi_request,
                    sizeof(Mpi2SepRequest_t)/4);
                if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
                        issue_reset = true;
                goto issue_host_reset;
        }
        if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
                memcpy(mpi_reply, ioc->base_cmds.reply,
                    sizeof(Mpi2SepReply_t));
        else
                memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;
        goto out;

 issue_host_reset:
        if (issue_reset)
                mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
                    FORCE_BIG_HAMMER);
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;
        rc = -EFAULT;
 out:
        mutex_unlock(&ioc->base_cmds.mutex);
        return rc;
}

/**
 * _base_get_port_facts - obtain port facts reply and save in ioc
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
{
        Mpi2PortFactsRequest_t mpi_request;
        Mpi2PortFactsReply_t mpi_reply;
        struct mpt2sas_port_facts *pfacts;
        int mpi_reply_sz, mpi_request_sz, r;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
        mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
        memset(&mpi_request, 0, mpi_request_sz);
        mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
        mpi_request.PortNumber = port;
        r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
            (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);

        if (r != 0) {
                printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
                    ioc->name, __func__, r);
                return r;
        }

        pfacts = &ioc->pfacts[port];
        memset(pfacts, 0, sizeof(struct mpt2sas_port_facts));
        pfacts->PortNumber = mpi_reply.PortNumber;
        pfacts->VP_ID = mpi_reply.VP_ID;
        pfacts->VF_ID = mpi_reply.VF_ID;
        pfacts->MaxPostedCmdBuffers =
            le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);

        return 0;
}

/**
 * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
 * @ioc: per adapter object
 * @timeout:
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_wait_for_iocstate(struct MPT2SAS_ADAPTER *ioc, int timeout,
        int sleep_flag)
{
        u32 ioc_state, doorbell;
        int rc;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        if (ioc->pci_error_recovery)
                return 0;

        doorbell = mpt2sas_base_get_iocstate(ioc, 0);
        ioc_state = doorbell & MPI2_IOC_STATE_MASK;
        dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
            ioc->name, __func__, ioc_state));

        switch (ioc_state) {
        case MPI2_IOC_STATE_READY:
        case MPI2_IOC_STATE_OPERATIONAL:
                return 0;
        }

        if (doorbell & MPI2_DOORBELL_USED) {
                dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "unexpected doorbell activ!e\n", ioc->name));
                goto issue_diag_reset;
        }

        if (ioc_state == MPI2_IOC_STATE_FAULT) {
                mpt2sas_base_fault_info(ioc, doorbell &
                    MPI2_DOORBELL_DATA_MASK);
                goto issue_diag_reset;
        }

        ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
            timeout, sleep_flag);
        if (ioc_state) {
                printk(MPT2SAS_ERR_FMT
                    "%s: failed going to ready state (ioc_state=0x%x)\n",
                    ioc->name, __func__, ioc_state);
                return -EFAULT;
        }

 issue_diag_reset:
        rc = _base_diag_reset(ioc, sleep_flag);
        return rc;
}

/**
 * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        Mpi2IOCFactsRequest_t mpi_request;
        Mpi2IOCFactsReply_t mpi_reply;
        struct mpt2sas_facts *facts;
        int mpi_reply_sz, mpi_request_sz, r;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        r = _base_wait_for_iocstate(ioc, 10, sleep_flag);
        if (r) {
                printk(MPT2SAS_ERR_FMT "%s: failed getting to correct state\n",
                        ioc->name, __func__);
                return r;
        }

        mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
        mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
        memset(&mpi_request, 0, mpi_request_sz);
        mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
        r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
            (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);

        if (r != 0) {
                printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
                    ioc->name, __func__, r);
                return r;
        }

        facts = &ioc->facts;
        memset(facts, 0, sizeof(struct mpt2sas_facts));
        facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
        facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
        facts->VP_ID = mpi_reply.VP_ID;
        facts->VF_ID = mpi_reply.VF_ID;
        facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
        facts->MaxChainDepth = mpi_reply.MaxChainDepth;
        facts->WhoInit = mpi_reply.WhoInit;
        facts->NumberOfPorts = mpi_reply.NumberOfPorts;
        facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
        facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
        facts->MaxReplyDescriptorPostQueueDepth =
            le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
        facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
        facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
        if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
                ioc->ir_firmware = 1;
        if ((facts->IOCCapabilities &
              MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
                ioc->rdpq_array_capable = 1;
        facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
        facts->IOCRequestFrameSize =
            le16_to_cpu(mpi_reply.IOCRequestFrameSize);
        facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
        facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
        ioc->shost->max_id = -1;
        facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
        facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
        facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
        facts->HighPriorityCredit =
            le16_to_cpu(mpi_reply.HighPriorityCredit);
        facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
        facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
            "max chains per io(%d)\n", ioc->name, facts->RequestCredit,
            facts->MaxChainDepth));
        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
            "reply frame size(%d)\n", ioc->name,
            facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
        return 0;
}

/**
 * _base_send_ioc_init - send ioc_init to firmware
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        Mpi2IOCInitRequest_t mpi_request;
        Mpi2IOCInitReply_t mpi_reply;
        int i, r = 0;
        struct timeval current_time;
        u16 ioc_status;
        u32 reply_post_free_array_sz = 0;
        Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
        dma_addr_t reply_post_free_array_dma;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
        mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
        mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
        mpi_request.VF_ID = 0; /* TODO */
        mpi_request.VP_ID = 0;
        mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
        mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);

        if (_base_is_controller_msix_enabled(ioc))
                mpi_request.HostMSIxVectors = ioc->reply_queue_count;
        mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
        mpi_request.ReplyDescriptorPostQueueDepth =
            cpu_to_le16(ioc->reply_post_queue_depth);
        mpi_request.ReplyFreeQueueDepth =
            cpu_to_le16(ioc->reply_free_queue_depth);

        mpi_request.SenseBufferAddressHigh =
            cpu_to_le32((u64)ioc->sense_dma >> 32);
        mpi_request.SystemReplyAddressHigh =
            cpu_to_le32((u64)ioc->reply_dma >> 32);
        mpi_request.SystemRequestFrameBaseAddress =
            cpu_to_le64((u64)ioc->request_dma);
        mpi_request.ReplyFreeQueueAddress =
            cpu_to_le64((u64)ioc->reply_free_dma);

        if (ioc->rdpq_array_enable) {
                reply_post_free_array_sz = ioc->reply_queue_count *
                    sizeof(Mpi2IOCInitRDPQArrayEntry);
                reply_post_free_array = pci_alloc_consistent(ioc->pdev,
                        reply_post_free_array_sz, &reply_post_free_array_dma);
                if (!reply_post_free_array) {
                        printk(MPT2SAS_ERR_FMT
                        "reply_post_free_array: pci_alloc_consistent failed\n",
                        ioc->name);
                        r = -ENOMEM;
                        goto out;
                }
                memset(reply_post_free_array, 0, reply_post_free_array_sz);
                for (i = 0; i < ioc->reply_queue_count; i++)
                        reply_post_free_array[i].RDPQBaseAddress =
                            cpu_to_le64(
                                (u64)ioc->reply_post[i].reply_post_free_dma);
                mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
                mpi_request.ReplyDescriptorPostQueueAddress =
                    cpu_to_le64((u64)reply_post_free_array_dma);
        } else {
                mpi_request.ReplyDescriptorPostQueueAddress =
                    cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
        }

        /* This time stamp specifies number of milliseconds
         * since epoch ~ midnight January 1, 1970.
         */
        do_gettimeofday(&current_time);
        mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
            (current_time.tv_usec / 1000));

        if (ioc->logging_level & MPT_DEBUG_INIT) {
                __le32 *mfp;
                int i;

                mfp = (__le32 *)&mpi_request;
                printk(KERN_INFO "\toffset:data\n");
                for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
                        printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
                            le32_to_cpu(mfp[i]));
        }

        r = _base_handshake_req_reply_wait(ioc,
            sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
            sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
            sleep_flag);

        if (r != 0) {
                printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
                    ioc->name, __func__, r);
                goto out;
        }

        ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
        if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
            mpi_reply.IOCLogInfo) {
                printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
                r = -EIO;
        }

out:
        if (reply_post_free_array)
                pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
                                    reply_post_free_array,
                                    reply_post_free_array_dma);
        return r;
}

/**
 * mpt2sas_port_enable_done - command completion routine for port enable
 * @ioc: per adapter object
 * @smid: system request message index
 * @msix_index: MSIX table index supplied by the OS
 * @reply: reply message frame(lower 32bit addr)
 *
 * Return 1 meaning mf should be freed from _base_interrupt
 *        0 means the mf is freed from this function.
 */
u8
mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
        u32 reply)
{
        MPI2DefaultReply_t *mpi_reply;
        u16 ioc_status;

        mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
        if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
                return 1;

        if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
                return 1;

        ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
        if (mpi_reply) {
                ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
                memcpy(ioc->port_enable_cmds.reply, mpi_reply,
                    mpi_reply->MsgLength*4);
        }
        ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;

        ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;

        if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
                ioc->port_enable_failed = 1;

        if (ioc->is_driver_loading) {
                if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
                        mpt2sas_port_enable_complete(ioc);
                        return 1;
                } else {
                        ioc->start_scan_failed = ioc_status;
                        ioc->start_scan = 0;
                        return 1;
                }
        }
        complete(&ioc->port_enable_cmds.done);
        return 1;
}


/**
 * _base_send_port_enable - send port_enable(discovery stuff) to firmware
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        Mpi2PortEnableRequest_t *mpi_request;
        Mpi2PortEnableReply_t *mpi_reply;
        unsigned long timeleft;
        int r = 0;
        u16 smid;
        u16 ioc_status;

        printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);

        if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
                printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }

        smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }

        ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
        mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
        ioc->port_enable_cmds.smid = smid;
        memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
        mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;

        init_completion(&ioc->port_enable_cmds.done);
        mpt2sas_base_put_smid_default(ioc, smid);
        timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
            300*HZ);
        if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
                printk(MPT2SAS_ERR_FMT "%s: timeout\n",
                    ioc->name, __func__);
                _debug_dump_mf(mpi_request,
                    sizeof(Mpi2PortEnableRequest_t)/4);
                if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
                        r = -EFAULT;
                else
                        r = -ETIME;
                goto out;
        }
        mpi_reply = ioc->port_enable_cmds.reply;

        ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
        if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
                printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
                    ioc->name, __func__, ioc_status);
                r = -EFAULT;
                goto out;
        }
 out:
        ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
        printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
            "SUCCESS" : "FAILED"));
        return r;
}

/**
 * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
 * @ioc: per adapter object
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
{
        Mpi2PortEnableRequest_t *mpi_request;
        u16 smid;

        printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);

        if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
                printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }

        smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }

        ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
        mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
        ioc->port_enable_cmds.smid = smid;
        memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
        mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;

        mpt2sas_base_put_smid_default(ioc, smid);
        return 0;
}

/**
 * _base_determine_wait_on_discovery - desposition
 * @ioc: per adapter object
 *
 * Decide whether to wait on discovery to complete. Used to either
 * locate boot device, or report volumes ahead of physical devices.
 *
 * Returns 1 for wait, 0 for don't wait
 */
static int
_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
{
        /* We wait for discovery to complete if IR firmware is loaded.
         * The sas topology events arrive before PD events, so we need time to
         * turn on the bit in ioc->pd_handles to indicate PD
         * Also, it maybe required to report Volumes ahead of physical
         * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
         */
        if (ioc->ir_firmware)
                return 1;

        /* if no Bios, then we don't need to wait */
        if (!ioc->bios_pg3.BiosVersion)
                return 0;

        /* Bios is present, then we drop down here.
         *
         * If there any entries in the Bios Page 2, then we wait
         * for discovery to complete.
         */

        /* Current Boot Device */
        if ((ioc->bios_pg2.CurrentBootDeviceForm &
            MPI2_BIOSPAGE2_FORM_MASK) ==
            MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
        /* Request Boot Device */
           (ioc->bios_pg2.ReqBootDeviceForm &
            MPI2_BIOSPAGE2_FORM_MASK) ==
            MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
        /* Alternate Request Boot Device */
           (ioc->bios_pg2.ReqAltBootDeviceForm &
            MPI2_BIOSPAGE2_FORM_MASK) ==
            MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
                return 0;

        return 1;
}


/**
 * _base_unmask_events - turn on notification for this event
 * @ioc: per adapter object
 * @event: firmware event
 *
 * The mask is stored in ioc->event_masks.
 */
static void
_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
{
        u32 desired_event;

        if (event >= 128)
                return;

        desired_event = (1 << (event % 32));

        if (event < 32)
                ioc->event_masks[0] &= ~desired_event;
        else if (event < 64)
                ioc->event_masks[1] &= ~desired_event;
        else if (event < 96)
                ioc->event_masks[2] &= ~desired_event;
        else if (event < 128)
                ioc->event_masks[3] &= ~desired_event;
}

/**
 * _base_event_notification - send event notification
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        Mpi2EventNotificationRequest_t *mpi_request;
        unsigned long timeleft;
        u16 smid;
        int r = 0;
        int i;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
                printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }

        smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
        if (!smid) {
                printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
                    ioc->name, __func__);
                return -EAGAIN;
        }
        ioc->base_cmds.status = MPT2_CMD_PENDING;
        mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
        ioc->base_cmds.smid = smid;
        memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
        mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
        mpi_request->VF_ID = 0; /* TODO */
        mpi_request->VP_ID = 0;
        for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
                mpi_request->EventMasks[i] =
                    cpu_to_le32(ioc->event_masks[i]);
        init_completion(&ioc->base_cmds.done);
        mpt2sas_base_put_smid_default(ioc, smid);
        timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
        if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
                printk(MPT2SAS_ERR_FMT "%s: timeout\n",
                    ioc->name, __func__);
                _debug_dump_mf(mpi_request,
                    sizeof(Mpi2EventNotificationRequest_t)/4);
                if (ioc->base_cmds.status & MPT2_CMD_RESET)
                        r = -EFAULT;
                else
                        r = -ETIME;
        } else
                dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
                    ioc->name, __func__));
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;
        return r;
}

/**
 * mpt2sas_base_validate_event_type - validating event types
 * @ioc: per adapter object
 * @event: firmware event
 *
 * This will turn on firmware event notification when application
 * ask for that event. We don't mask events that are already enabled.
 */
void
mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
{
        int i, j;
        u32 event_mask, desired_event;
        u8 send_update_to_fw;

        for (i = 0, send_update_to_fw = 0; i <
            MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
                event_mask = ~event_type[i];
                desired_event = 1;
                for (j = 0; j < 32; j++) {
                        if (!(event_mask & desired_event) &&
                            (ioc->event_masks[i] & desired_event)) {
                                ioc->event_masks[i] &= ~desired_event;
                                send_update_to_fw = 1;
                        }
                        desired_event = (desired_event << 1);
                }
        }

        if (!send_update_to_fw)
                return;

        mutex_lock(&ioc->base_cmds.mutex);
        _base_event_notification(ioc, CAN_SLEEP);
        mutex_unlock(&ioc->base_cmds.mutex);
}

/**
 * _base_diag_reset - the "big hammer" start of day reset
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        u32 host_diagnostic;
        u32 ioc_state;
        u32 count;
        u32 hcb_size;

        printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
        drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
            ioc->name));

        count = 0;
        do {
                /* Write magic sequence to WriteSequence register
                 * Loop until in diagnostic mode
                 */
                drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic "
                    "sequence\n", ioc->name));
                writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
                writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);

                /* wait 100 msec */
                if (sleep_flag == CAN_SLEEP)
                        msleep(100);
                else
                        mdelay(100);

                if (count++ > 20)
                        goto out;

                host_diagnostic = readl(&ioc->chip->HostDiagnostic);
                drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic "
                    "sequence: count(%d), host_diagnostic(0x%08x)\n",
                    ioc->name, count, host_diagnostic));

        } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);

        hcb_size = readl(&ioc->chip->HCBSize);

        drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n",
            ioc->name));
        writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
             &ioc->chip->HostDiagnostic);

        /* This delay allows the chip PCIe hardware time to finish reset tasks*/
        if (sleep_flag == CAN_SLEEP)
                msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
        else
                mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);

        /* Approximately 300 second max wait */
        for (count = 0; count < (300000000 /
            MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {

                host_diagnostic = readl(&ioc->chip->HostDiagnostic);

                if (host_diagnostic == 0xFFFFFFFF)
                        goto out;
                if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
                        break;

                /* Wait to pass the second read delay window */
                if (sleep_flag == CAN_SLEEP)
                        msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
                               /1000);
                else
                        mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
                               /1000);
        }

        if (host_diagnostic & MPI2_DIAG_HCB_MODE) {

                drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter "
                    "assuming the HCB Address points to good F/W\n",
                    ioc->name));
                host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
                host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
                writel(host_diagnostic, &ioc->chip->HostDiagnostic);

                drsprintk(ioc, printk(MPT2SAS_INFO_FMT
                    "re-enable the HCDW\n", ioc->name));
                writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
                    &ioc->chip->HCBSize);
        }

        drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n",
            ioc->name));
        writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
            &ioc->chip->HostDiagnostic);

        drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the "
            "diagnostic register\n", ioc->name));
        writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);

        drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the "
            "READY state\n", ioc->name));
        ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
            sleep_flag);
        if (ioc_state) {
                printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
                    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
                goto out;
        }

        printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
        return 0;

 out:
        printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name);
        return -EFAULT;
}

/**
 * _base_make_ioc_ready - put controller in READY state
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 * @type: FORCE_BIG_HAMMER or SOFT_RESET
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
    enum reset_type type)
{
        u32 ioc_state;
        int rc;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        if (ioc->pci_error_recovery)
                return 0;

        ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
        dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
            ioc->name, __func__, ioc_state));

        if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
                return 0;

        if (ioc_state & MPI2_DOORBELL_USED) {
                dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
                    "active!\n", ioc->name));
                goto issue_diag_reset;
        }

        if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
                mpt2sas_base_fault_info(ioc, ioc_state &
                    MPI2_DOORBELL_DATA_MASK);
                goto issue_diag_reset;
        }

        if (type == FORCE_BIG_HAMMER)
                goto issue_diag_reset;

        if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
                if (!(_base_send_ioc_reset(ioc,
                    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
                        ioc->ioc_reset_count++;
                        return 0;
        }

 issue_diag_reset:
        rc = _base_diag_reset(ioc, CAN_SLEEP);
        ioc->ioc_reset_count++;
        return rc;
}

/**
 * _base_make_ioc_operational - put controller in OPERATIONAL state
 * @ioc: per adapter object
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        int r, i;
        unsigned long   flags;
        u32 reply_address;
        u16 smid;
        struct _tr_list *delayed_tr, *delayed_tr_next;
        u8 hide_flag;
        struct adapter_reply_queue *reply_q;
        long reply_post_free;
        u32 reply_post_free_sz, index = 0;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        /* clean the delayed target reset list */
        list_for_each_entry_safe(delayed_tr, delayed_tr_next,
            &ioc->delayed_tr_list, list) {
                list_del(&delayed_tr->list);
                kfree(delayed_tr);
        }

        list_for_each_entry_safe(delayed_tr, delayed_tr_next,
            &ioc->delayed_tr_volume_list, list) {
                list_del(&delayed_tr->list);
                kfree(delayed_tr);
        }

        /* initialize the scsi lookup free list */
        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        INIT_LIST_HEAD(&ioc->free_list);
        smid = 1;
        for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
                INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
                ioc->scsi_lookup[i].cb_idx = 0xFF;
                ioc->scsi_lookup[i].smid = smid;
                ioc->scsi_lookup[i].scmd = NULL;
                ioc->scsi_lookup[i].direct_io = 0;
                list_add_tail(&ioc->scsi_lookup[i].tracker_list,
                    &ioc->free_list);
        }

        /* hi-priority queue */
        INIT_LIST_HEAD(&ioc->hpr_free_list);
        smid = ioc->hi_priority_smid;
        for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
                ioc->hpr_lookup[i].cb_idx = 0xFF;
                ioc->hpr_lookup[i].smid = smid;
                list_add_tail(&ioc->hpr_lookup[i].tracker_list,
                    &ioc->hpr_free_list);
        }

        /* internal queue */
        INIT_LIST_HEAD(&ioc->internal_free_list);
        smid = ioc->internal_smid;
        for (i = 0; i < ioc->internal_depth; i++, smid++) {
                ioc->internal_lookup[i].cb_idx = 0xFF;
                ioc->internal_lookup[i].smid = smid;
                list_add_tail(&ioc->internal_lookup[i].tracker_list,
                    &ioc->internal_free_list);
        }

        /* chain pool */
        INIT_LIST_HEAD(&ioc->free_chain_list);
        for (i = 0; i < ioc->chain_depth; i++)
                list_add_tail(&ioc->chain_lookup[i].tracker_list,
                    &ioc->free_chain_list);

        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);

        /* initialize Reply Free Queue */
        for (i = 0, reply_address = (u32)ioc->reply_dma ;
            i < ioc->reply_free_queue_depth ; i++, reply_address +=
            ioc->reply_sz)
                ioc->reply_free[i] = cpu_to_le32(reply_address);

        /* initialize reply queues */
        if (ioc->is_driver_loading)
                _base_assign_reply_queues(ioc);

        /* initialize Reply Post Free Queue */
        reply_post_free_sz = ioc->reply_post_queue_depth *
            sizeof(Mpi2DefaultReplyDescriptor_t);
        reply_post_free = (long)ioc->reply_post[index].reply_post_free;
        list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
                reply_q->reply_post_host_index = 0;
                reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
                    reply_post_free;
                for (i = 0; i < ioc->reply_post_queue_depth; i++)
                        reply_q->reply_post_free[i].Words =
                                                     cpu_to_le64(ULLONG_MAX);
                if (!_base_is_controller_msix_enabled(ioc))
                        goto skip_init_reply_post_free_queue;
                /*
                 * If RDPQ is enabled, switch to the next allocation.
                 * Otherwise advance within the contiguous region.
                 */
                if (ioc->rdpq_array_enable)
                        reply_post_free = (long)
                            ioc->reply_post[++index].reply_post_free;
                else
                        reply_post_free += reply_post_free_sz;
        }
 skip_init_reply_post_free_queue:

        r = _base_send_ioc_init(ioc, sleep_flag);
        if (r)
                return r;

        /* initialize reply free host index */
        ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
        writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);

        /* initialize reply post host index */
        list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
                writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
                    &ioc->chip->ReplyPostHostIndex);
                if (!_base_is_controller_msix_enabled(ioc))
                        goto skip_init_reply_post_host_index;
        }

 skip_init_reply_post_host_index:

        _base_unmask_interrupts(ioc);

        r = _base_event_notification(ioc, sleep_flag);
        if (r)
                return r;

        if (sleep_flag == CAN_SLEEP)
                _base_static_config_pages(ioc);


        if (ioc->is_driver_loading) {
                if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
                    == 0x80) {
                        hide_flag = (u8) (
                            le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
                            MFG_PAGE10_HIDE_SSDS_MASK);
                        if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
                                ioc->mfg_pg10_hide_flag = hide_flag;
                }
                ioc->wait_for_discovery_to_complete =
                    _base_determine_wait_on_discovery(ioc);
                return r; /* scan_start and scan_finished support */
        }
        r = _base_send_port_enable(ioc, sleep_flag);
        if (r)
                return r;

        return r;
}

/**
 * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
 * @ioc: per adapter object
 *
 * Return nothing.
 */
void
mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
{
        struct pci_dev *pdev = ioc->pdev;

        dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        if (ioc->chip_phys && ioc->chip) {
                _base_mask_interrupts(ioc);
                ioc->shost_recovery = 1;
                _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
                ioc->shost_recovery = 0;
        }

        _base_free_irq(ioc);
        _base_disable_msix(ioc);

        if (ioc->chip_phys && ioc->chip)
                iounmap(ioc->chip);
        ioc->chip_phys = 0;

        if (pci_is_enabled(pdev)) {
                pci_release_selected_regions(ioc->pdev, ioc->bars);
                pci_disable_pcie_error_reporting(pdev);
                pci_disable_device(pdev);
        }
        return;
}

/**
 * mpt2sas_base_attach - attach controller instance
 * @ioc: per adapter object
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
        int r, i;
        int cpu_id, last_cpu_id = 0;

        dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        /* setup cpu_msix_table */
        ioc->cpu_count = num_online_cpus();
        for_each_online_cpu(cpu_id)
                last_cpu_id = cpu_id;
        ioc->cpu_msix_table_sz = last_cpu_id + 1;
        ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
        ioc->reply_queue_count = 1;
        if (!ioc->cpu_msix_table) {
                dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
                    "cpu_msix_table failed!!!\n", ioc->name));
                r = -ENOMEM;
                goto out_free_resources;
        }

        if (ioc->is_warpdrive) {
                ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
                    sizeof(resource_size_t *), GFP_KERNEL);
                if (!ioc->reply_post_host_index) {
                        dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation "
                                "for cpu_msix_table failed!!!\n", ioc->name));
                        r = -ENOMEM;
                        goto out_free_resources;
                }
        }

        ioc->rdpq_array_enable_assigned = 0;
        ioc->dma_mask = 0;
        r = mpt2sas_base_map_resources(ioc);
        if (r)
                goto out_free_resources;

        if (ioc->is_warpdrive) {
                ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
                    &ioc->chip->ReplyPostHostIndex;

                for (i = 1; i < ioc->cpu_msix_table_sz; i++)
                        ioc->reply_post_host_index[i] =
                        (resource_size_t __iomem *)
                        ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
                        * 4)));
        }

        pci_set_drvdata(ioc->pdev, ioc->shost);
        r = _base_get_ioc_facts(ioc, CAN_SLEEP);
        if (r)
                goto out_free_resources;

        r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
        if (r)
                goto out_free_resources;

        ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
            sizeof(struct mpt2sas_port_facts), GFP_KERNEL);
        if (!ioc->pfacts) {
                r = -ENOMEM;
                goto out_free_resources;
        }

        for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
                r = _base_get_port_facts(ioc, i, CAN_SLEEP);
                if (r)
                        goto out_free_resources;
        }

        r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
        if (r)
                goto out_free_resources;

        init_waitqueue_head(&ioc->reset_wq);
        /* allocate memory pd handle bitmask list */
        ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
        if (ioc->facts.MaxDevHandle % 8)
                ioc->pd_handles_sz++;
        ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
            GFP_KERNEL);
        if (!ioc->pd_handles) {
                r = -ENOMEM;
                goto out_free_resources;
        }
        ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
            GFP_KERNEL);
        if (!ioc->blocking_handles) {
                r = -ENOMEM;
                goto out_free_resources;
        }
        ioc->fwfault_debug = mpt2sas_fwfault_debug;

        /* base internal command bits */
        mutex_init(&ioc->base_cmds.mutex);
        ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->base_cmds.status = MPT2_CMD_NOT_USED;

        /* port_enable command bits */
        ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;

        /* transport internal command bits */
        ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
        mutex_init(&ioc->transport_cmds.mutex);

        /* scsih internal command bits */
        ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
        mutex_init(&ioc->scsih_cmds.mutex);

        /* task management internal command bits */
        ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
        mutex_init(&ioc->tm_cmds.mutex);

        /* config page internal command bits */
        ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->config_cmds.status = MPT2_CMD_NOT_USED;
        mutex_init(&ioc->config_cmds.mutex);

        /* ctl module internal command bits */
        ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
        ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
        ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
        mutex_init(&ioc->ctl_cmds.mutex);

        if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
            !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
            !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
            !ioc->ctl_cmds.sense) {
                r = -ENOMEM;
                goto out_free_resources;
        }

        if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
            !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
            !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) {
                r = -ENOMEM;
                goto out_free_resources;
        }

        for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
                ioc->event_masks[i] = -1;

        /* here we enable the events we care about */
        _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
        _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
        _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
        _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
        _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
        _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
        _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
        _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
        _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
        _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
        _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
        r = _base_make_ioc_operational(ioc, CAN_SLEEP);
        if (r)
                goto out_free_resources;

        ioc->non_operational_loop = 0;

        return 0;

 out_free_resources:

        ioc->remove_host = 1;
        mpt2sas_base_free_resources(ioc);
        _base_release_memory_pools(ioc);
        pci_set_drvdata(ioc->pdev, NULL);
        kfree(ioc->cpu_msix_table);
        if (ioc->is_warpdrive)
                kfree(ioc->reply_post_host_index);
        kfree(ioc->pd_handles);
        kfree(ioc->blocking_handles);
        kfree(ioc->tm_cmds.reply);
        kfree(ioc->transport_cmds.reply);
        kfree(ioc->scsih_cmds.reply);
        kfree(ioc->config_cmds.reply);
        kfree(ioc->base_cmds.reply);
        kfree(ioc->port_enable_cmds.reply);
        kfree(ioc->ctl_cmds.reply);
        kfree(ioc->ctl_cmds.sense);
        kfree(ioc->pfacts);
        ioc->ctl_cmds.reply = NULL;
        ioc->base_cmds.reply = NULL;
        ioc->tm_cmds.reply = NULL;
        ioc->scsih_cmds.reply = NULL;
        ioc->transport_cmds.reply = NULL;
        ioc->config_cmds.reply = NULL;
        ioc->pfacts = NULL;
        return r;
}


/**
 * mpt2sas_base_detach - remove controller instance
 * @ioc: per adapter object
 *
 * Return nothing.
 */
void
mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
{

        dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
            __func__));

        mpt2sas_base_stop_watchdog(ioc);
        mpt2sas_base_free_resources(ioc);
        _base_release_memory_pools(ioc);
        pci_set_drvdata(ioc->pdev, NULL);
        kfree(ioc->cpu_msix_table);
        if (ioc->is_warpdrive)
                kfree(ioc->reply_post_host_index);
        kfree(ioc->pd_handles);
        kfree(ioc->blocking_handles);
        kfree(ioc->pfacts);
        kfree(ioc->ctl_cmds.reply);
        kfree(ioc->ctl_cmds.sense);
        kfree(ioc->base_cmds.reply);
        kfree(ioc->port_enable_cmds.reply);
        kfree(ioc->tm_cmds.reply);
        kfree(ioc->transport_cmds.reply);
        kfree(ioc->scsih_cmds.reply);
        kfree(ioc->config_cmds.reply);
}

/**
 * _base_reset_handler - reset callback handler (for base)
 * @ioc: per adapter object
 * @reset_phase: phase
 *
 * The handler for doing any required cleanup or initialization.
 *
 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
 * MPT2_IOC_DONE_RESET
 *
 * Return nothing.
 */
static void
_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
        mpt2sas_scsih_reset_handler(ioc, reset_phase);
        mpt2sas_ctl_reset_handler(ioc, reset_phase);
        switch (reset_phase) {
        case MPT2_IOC_PRE_RESET:
                dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
                break;
        case MPT2_IOC_AFTER_RESET:
                dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
                if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
                        ioc->transport_cmds.status |= MPT2_CMD_RESET;
                        mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid);
                        complete(&ioc->transport_cmds.done);
                }
                if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
                        ioc->base_cmds.status |= MPT2_CMD_RESET;
                        mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
                        complete(&ioc->base_cmds.done);
                }
                if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
                        ioc->port_enable_failed = 1;
                        ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
                        mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
                        if (ioc->is_driver_loading) {
                                ioc->start_scan_failed =
                                    MPI2_IOCSTATUS_INTERNAL_ERROR;
                                ioc->start_scan = 0;
                                ioc->port_enable_cmds.status =
                                                MPT2_CMD_NOT_USED;
                        } else
                                complete(&ioc->port_enable_cmds.done);

                }
                if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
                        ioc->config_cmds.status |= MPT2_CMD_RESET;
                        mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
                        ioc->config_cmds.smid = USHRT_MAX;
                        complete(&ioc->config_cmds.done);
                }
                break;
        case MPT2_IOC_DONE_RESET:
                dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
                    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
                break;
        }
}

/**
 * _wait_for_commands_to_complete - reset controller
 * @ioc: Pointer to MPT_ADAPTER structure
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 *
 * This function waiting(3s) for all pending commands to complete
 * prior to putting controller in reset.
 */
static void
_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
        u32 ioc_state;
        unsigned long flags;
        u16 i;

        ioc->pending_io_count = 0;
        if (sleep_flag != CAN_SLEEP)
                return;

        ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
        if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
                return;

        /* pending command count */
        spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
        for (i = 0; i < ioc->scsiio_depth; i++)
                if (ioc->scsi_lookup[i].cb_idx != 0xFF)
                        ioc->pending_io_count++;
        spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);

        if (!ioc->pending_io_count)
                return;

        /* wait for pending commands to complete */
        wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
}

/**
 * mpt2sas_base_hard_reset_handler - reset controller
 * @ioc: Pointer to MPT_ADAPTER structure
 * @sleep_flag: CAN_SLEEP or NO_SLEEP
 * @type: FORCE_BIG_HAMMER or SOFT_RESET
 *
 * Returns 0 for success, non-zero for failure.
 */
int
mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
    enum reset_type type)
{
        int r;
        unsigned long flags;

        dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
            __func__));

        if (ioc->pci_error_recovery) {
                printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
                    ioc->name, __func__);
                r = 0;
                goto out_unlocked;
        }

        if (mpt2sas_fwfault_debug)
                mpt2sas_halt_firmware(ioc);

        /* TODO - What we really should be doing is pulling
         * out all the code associated with NO_SLEEP; its never used.
         * That is legacy code from mpt fusion driver, ported over.
         * I will leave this BUG_ON here for now till its been resolved.
         */
        BUG_ON(sleep_flag == NO_SLEEP);

        /* wait for an active reset in progress to complete */
        if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
                do {
                        ssleep(1);
                } while (ioc->shost_recovery == 1);
                dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
                    __func__));
                return ioc->ioc_reset_in_progress_status;
        }

        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
        ioc->shost_recovery = 1;
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);

        _base_reset_handler(ioc, MPT2_IOC_PRE_RESET);
        _wait_for_commands_to_complete(ioc, sleep_flag);
        _base_mask_interrupts(ioc);
        r = _base_make_ioc_ready(ioc, sleep_flag, type);
        if (r)
                goto out;
        _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);

        /* If this hard reset is called while port enable is active, then
         * there is no reason to call make_ioc_operational
         */
        if (ioc->is_driver_loading && ioc->port_enable_failed) {
                ioc->remove_host = 1;
                r = -EFAULT;
                goto out;
        }

        r = _base_get_ioc_facts(ioc, CAN_SLEEP);
        if (r)
                goto out;

        if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
                panic("%s: Issue occurred with flashing controller firmware."
                      "Please reboot the system and ensure that the correct"
                      " firmware version is running\n", ioc->name);

        r = _base_make_ioc_operational(ioc, sleep_flag);
        if (!r)
                _base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
 out:
        dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n",
            ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));

        spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
        ioc->ioc_reset_in_progress_status = r;
        ioc->shost_recovery = 0;
        spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
        mutex_unlock(&ioc->reset_in_progress_mutex);

 out_unlocked:
        dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
            __func__));
        return r;
}