2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
5 * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
6 * Copyright 2013-2014 Intel Mobile Communications GmbH
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 * Transmit and frame generation functions.
16 #include <linux/kernel.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/bitmap.h>
21 #include <linux/rcupdate.h>
22 #include <linux/export.h>
23 #include <net/net_namespace.h>
24 #include <net/ieee80211_radiotap.h>
25 #include <net/cfg80211.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
40 static inline void ieee80211_tx_stats(struct net_device
*dev
, u32 len
)
42 struct pcpu_sw_netstats
*tstats
= this_cpu_ptr(dev
->tstats
);
44 u64_stats_update_begin(&tstats
->syncp
);
46 tstats
->tx_bytes
+= len
;
47 u64_stats_update_end(&tstats
->syncp
);
50 static __le16
ieee80211_duration(struct ieee80211_tx_data
*tx
,
51 struct sk_buff
*skb
, int group_addr
,
54 int rate
, mrate
, erp
, dur
, i
, shift
= 0;
55 struct ieee80211_rate
*txrate
;
56 struct ieee80211_local
*local
= tx
->local
;
57 struct ieee80211_supported_band
*sband
;
58 struct ieee80211_hdr
*hdr
;
59 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
60 struct ieee80211_chanctx_conf
*chanctx_conf
;
64 chanctx_conf
= rcu_dereference(tx
->sdata
->vif
.chanctx_conf
);
66 shift
= ieee80211_chandef_get_shift(&chanctx_conf
->def
);
67 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
71 /* assume HW handles this */
72 if (tx
->rate
.flags
& (IEEE80211_TX_RC_MCS
| IEEE80211_TX_RC_VHT_MCS
))
76 if (WARN_ON_ONCE(tx
->rate
.idx
< 0))
79 sband
= local
->hw
.wiphy
->bands
[info
->band
];
80 txrate
= &sband
->bitrates
[tx
->rate
.idx
];
82 erp
= txrate
->flags
& IEEE80211_RATE_ERP_G
;
85 * data and mgmt (except PS Poll):
87 * - during contention period:
88 * if addr1 is group address: 0
89 * if more fragments = 0 and addr1 is individual address: time to
90 * transmit one ACK plus SIFS
91 * if more fragments = 1 and addr1 is individual address: time to
92 * transmit next fragment plus 2 x ACK plus 3 x SIFS
95 * - control response frame (CTS or ACK) shall be transmitted using the
96 * same rate as the immediately previous frame in the frame exchange
97 * sequence, if this rate belongs to the PHY mandatory rates, or else
98 * at the highest possible rate belonging to the PHY rates in the
101 hdr
= (struct ieee80211_hdr
*)skb
->data
;
102 if (ieee80211_is_ctl(hdr
->frame_control
)) {
103 /* TODO: These control frames are not currently sent by
104 * mac80211, but should they be implemented, this function
105 * needs to be updated to support duration field calculation.
107 * RTS: time needed to transmit pending data/mgmt frame plus
108 * one CTS frame plus one ACK frame plus 3 x SIFS
109 * CTS: duration of immediately previous RTS minus time
110 * required to transmit CTS and its SIFS
111 * ACK: 0 if immediately previous directed data/mgmt had
112 * more=0, with more=1 duration in ACK frame is duration
113 * from previous frame minus time needed to transmit ACK
115 * PS Poll: BIT(15) | BIT(14) | aid
121 if (0 /* FIX: data/mgmt during CFP */)
122 return cpu_to_le16(32768);
124 if (group_addr
) /* Group address as the destination - no ACK */
127 /* Individual destination address:
128 * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes)
129 * CTS and ACK frames shall be transmitted using the highest rate in
130 * basic rate set that is less than or equal to the rate of the
131 * immediately previous frame and that is using the same modulation
132 * (CCK or OFDM). If no basic rate set matches with these requirements,
133 * the highest mandatory rate of the PHY that is less than or equal to
134 * the rate of the previous frame is used.
135 * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps
138 /* use lowest available if everything fails */
139 mrate
= sband
->bitrates
[0].bitrate
;
140 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
141 struct ieee80211_rate
*r
= &sband
->bitrates
[i
];
143 if (r
->bitrate
> txrate
->bitrate
)
146 if ((rate_flags
& r
->flags
) != rate_flags
)
149 if (tx
->sdata
->vif
.bss_conf
.basic_rates
& BIT(i
))
150 rate
= DIV_ROUND_UP(r
->bitrate
, 1 << shift
);
152 switch (sband
->band
) {
153 case IEEE80211_BAND_2GHZ
: {
155 if (tx
->sdata
->flags
& IEEE80211_SDATA_OPERATING_GMODE
)
156 flag
= IEEE80211_RATE_MANDATORY_G
;
158 flag
= IEEE80211_RATE_MANDATORY_B
;
163 case IEEE80211_BAND_5GHZ
:
164 if (r
->flags
& IEEE80211_RATE_MANDATORY_A
)
167 case IEEE80211_BAND_60GHZ
:
168 /* TODO, for now fall through */
169 case IEEE80211_NUM_BANDS
:
175 /* No matching basic rate found; use highest suitable mandatory
177 rate
= DIV_ROUND_UP(mrate
, 1 << shift
);
180 /* Don't calculate ACKs for QoS Frames with NoAck Policy set */
181 if (ieee80211_is_data_qos(hdr
->frame_control
) &&
182 *(ieee80211_get_qos_ctl(hdr
)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK
)
185 /* Time needed to transmit ACK
186 * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up
187 * to closest integer */
188 dur
= ieee80211_frame_duration(sband
->band
, 10, rate
, erp
,
189 tx
->sdata
->vif
.bss_conf
.use_short_preamble
,
193 /* Frame is fragmented: duration increases with time needed to
194 * transmit next fragment plus ACK and 2 x SIFS. */
195 dur
*= 2; /* ACK + SIFS */
197 dur
+= ieee80211_frame_duration(sband
->band
, next_frag_len
,
198 txrate
->bitrate
, erp
,
199 tx
->sdata
->vif
.bss_conf
.use_short_preamble
,
203 return cpu_to_le16(dur
);
207 static ieee80211_tx_result debug_noinline
208 ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data
*tx
)
210 struct ieee80211_local
*local
= tx
->local
;
211 struct ieee80211_if_managed
*ifmgd
;
213 /* driver doesn't support power save */
214 if (!ieee80211_hw_check(&local
->hw
, SUPPORTS_PS
))
217 /* hardware does dynamic power save */
218 if (ieee80211_hw_check(&local
->hw
, SUPPORTS_DYNAMIC_PS
))
221 /* dynamic power save disabled */
222 if (local
->hw
.conf
.dynamic_ps_timeout
<= 0)
225 /* we are scanning, don't enable power save */
229 if (!local
->ps_sdata
)
232 /* No point if we're going to suspend */
233 if (local
->quiescing
)
236 /* dynamic ps is supported only in managed mode */
237 if (tx
->sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
240 ifmgd
= &tx
->sdata
->u
.mgd
;
243 * Don't wakeup from power save if u-apsd is enabled, voip ac has
244 * u-apsd enabled and the frame is in voip class. This effectively
245 * means that even if all access categories have u-apsd enabled, in
246 * practise u-apsd is only used with the voip ac. This is a
247 * workaround for the case when received voip class packets do not
248 * have correct qos tag for some reason, due the network or the
251 * Note: ifmgd->uapsd_queues access is racy here. If the value is
252 * changed via debugfs, user needs to reassociate manually to have
253 * everything in sync.
255 if ((ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
) &&
256 (ifmgd
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
) &&
257 skb_get_queue_mapping(tx
->skb
) == IEEE80211_AC_VO
)
260 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
261 ieee80211_stop_queues_by_reason(&local
->hw
,
262 IEEE80211_MAX_QUEUE_MAP
,
263 IEEE80211_QUEUE_STOP_REASON_PS
,
265 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
266 ieee80211_queue_work(&local
->hw
,
267 &local
->dynamic_ps_disable_work
);
270 /* Don't restart the timer if we're not disassociated */
271 if (!ifmgd
->associated
)
274 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
275 msecs_to_jiffies(local
->hw
.conf
.dynamic_ps_timeout
));
280 static ieee80211_tx_result debug_noinline
281 ieee80211_tx_h_check_assoc(struct ieee80211_tx_data
*tx
)
284 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
285 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
288 if (unlikely(info
->flags
& IEEE80211_TX_CTL_INJECTED
))
291 if (unlikely(test_bit(SCAN_SW_SCANNING
, &tx
->local
->scanning
)) &&
292 test_bit(SDATA_STATE_OFFCHANNEL
, &tx
->sdata
->state
) &&
293 !ieee80211_is_probe_req(hdr
->frame_control
) &&
294 !ieee80211_is_nullfunc(hdr
->frame_control
))
296 * When software scanning only nullfunc frames (to notify
297 * the sleep state to the AP) and probe requests (for the
298 * active scan) are allowed, all other frames should not be
299 * sent and we should not get here, but if we do
300 * nonetheless, drop them to avoid sending them
301 * off-channel. See the link below and
302 * ieee80211_start_scan() for more.
304 * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089
308 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_OCB
)
311 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_WDS
)
314 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_MESH_POINT
)
317 if (tx
->flags
& IEEE80211_TX_PS_BUFFERED
)
321 assoc
= test_sta_flag(tx
->sta
, WLAN_STA_ASSOC
);
323 if (likely(tx
->flags
& IEEE80211_TX_UNICAST
)) {
324 if (unlikely(!assoc
&&
325 ieee80211_is_data(hdr
->frame_control
))) {
326 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
327 sdata_info(tx
->sdata
,
328 "dropped data frame to not associated station %pM\n",
331 I802_DEBUG_INC(tx
->local
->tx_handlers_drop_not_assoc
);
334 } else if (unlikely(tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
&&
335 ieee80211_is_data(hdr
->frame_control
) &&
336 !atomic_read(&tx
->sdata
->u
.ap
.num_mcast_sta
))) {
338 * No associated STAs - no need to send multicast
347 /* This function is called whenever the AP is about to exceed the maximum limit
348 * of buffered frames for power saving STAs. This situation should not really
349 * happen often during normal operation, so dropping the oldest buffered packet
350 * from each queue should be OK to make some room for new frames. */
351 static void purge_old_ps_buffers(struct ieee80211_local
*local
)
353 int total
= 0, purged
= 0;
355 struct ieee80211_sub_if_data
*sdata
;
356 struct sta_info
*sta
;
358 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
361 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
362 ps
= &sdata
->u
.ap
.ps
;
363 else if (ieee80211_vif_is_mesh(&sdata
->vif
))
364 ps
= &sdata
->u
.mesh
.ps
;
368 skb
= skb_dequeue(&ps
->bc_buf
);
373 total
+= skb_queue_len(&ps
->bc_buf
);
377 * Drop one frame from each station from the lowest-priority
378 * AC that has frames at all.
380 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
) {
383 for (ac
= IEEE80211_AC_BK
; ac
>= IEEE80211_AC_VO
; ac
--) {
384 skb
= skb_dequeue(&sta
->ps_tx_buf
[ac
]);
385 total
+= skb_queue_len(&sta
->ps_tx_buf
[ac
]);
388 ieee80211_free_txskb(&local
->hw
, skb
);
394 local
->total_ps_buffered
= total
;
395 ps_dbg_hw(&local
->hw
, "PS buffers full - purged %d frames\n", purged
);
398 static ieee80211_tx_result
399 ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data
*tx
)
401 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
402 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
406 * broadcast/multicast frame
408 * If any of the associated/peer stations is in power save mode,
409 * the frame is buffered to be sent after DTIM beacon frame.
410 * This is done either by the hardware or us.
413 /* powersaving STAs currently only in AP/VLAN/mesh mode */
414 if (tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
415 tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
419 ps
= &tx
->sdata
->bss
->ps
;
420 } else if (ieee80211_vif_is_mesh(&tx
->sdata
->vif
)) {
421 ps
= &tx
->sdata
->u
.mesh
.ps
;
427 /* no buffering for ordered frames */
428 if (ieee80211_has_order(hdr
->frame_control
))
431 if (ieee80211_is_probe_req(hdr
->frame_control
))
434 if (ieee80211_hw_check(&tx
->local
->hw
, QUEUE_CONTROL
))
435 info
->hw_queue
= tx
->sdata
->vif
.cab_queue
;
437 /* no stations in PS mode */
438 if (!atomic_read(&ps
->num_sta_ps
))
441 info
->flags
|= IEEE80211_TX_CTL_SEND_AFTER_DTIM
;
443 /* device releases frame after DTIM beacon */
444 if (!ieee80211_hw_check(&tx
->local
->hw
, HOST_BROADCAST_PS_BUFFERING
))
447 /* buffered in mac80211 */
448 if (tx
->local
->total_ps_buffered
>= TOTAL_MAX_TX_BUFFER
)
449 purge_old_ps_buffers(tx
->local
);
451 if (skb_queue_len(&ps
->bc_buf
) >= AP_MAX_BC_BUFFER
) {
453 "BC TX buffer full - dropping the oldest frame\n");
454 dev_kfree_skb(skb_dequeue(&ps
->bc_buf
));
456 tx
->local
->total_ps_buffered
++;
458 skb_queue_tail(&ps
->bc_buf
, tx
->skb
);
463 static int ieee80211_use_mfp(__le16 fc
, struct sta_info
*sta
,
466 if (!ieee80211_is_mgmt(fc
))
469 if (sta
== NULL
|| !test_sta_flag(sta
, WLAN_STA_MFP
))
472 if (!ieee80211_is_robust_mgmt_frame(skb
))
478 static ieee80211_tx_result
479 ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data
*tx
)
481 struct sta_info
*sta
= tx
->sta
;
482 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
483 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
484 struct ieee80211_local
*local
= tx
->local
;
489 if (unlikely((test_sta_flag(sta
, WLAN_STA_PS_STA
) ||
490 test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) ||
491 test_sta_flag(sta
, WLAN_STA_PS_DELIVER
)) &&
492 !(info
->flags
& IEEE80211_TX_CTL_NO_PS_BUFFER
))) {
493 int ac
= skb_get_queue_mapping(tx
->skb
);
495 if (ieee80211_is_mgmt(hdr
->frame_control
) &&
496 !ieee80211_is_bufferable_mmpdu(hdr
->frame_control
)) {
497 info
->flags
|= IEEE80211_TX_CTL_NO_PS_BUFFER
;
501 ps_dbg(sta
->sdata
, "STA %pM aid %d: PS buffer for AC %d\n",
502 sta
->sta
.addr
, sta
->sta
.aid
, ac
);
503 if (tx
->local
->total_ps_buffered
>= TOTAL_MAX_TX_BUFFER
)
504 purge_old_ps_buffers(tx
->local
);
506 /* sync with ieee80211_sta_ps_deliver_wakeup */
507 spin_lock(&sta
->ps_lock
);
509 * STA woke up the meantime and all the frames on ps_tx_buf have
510 * been queued to pending queue. No reordering can happen, go
511 * ahead and Tx the packet.
513 if (!test_sta_flag(sta
, WLAN_STA_PS_STA
) &&
514 !test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) &&
515 !test_sta_flag(sta
, WLAN_STA_PS_DELIVER
)) {
516 spin_unlock(&sta
->ps_lock
);
520 if (skb_queue_len(&sta
->ps_tx_buf
[ac
]) >= STA_MAX_TX_BUFFER
) {
521 struct sk_buff
*old
= skb_dequeue(&sta
->ps_tx_buf
[ac
]);
523 "STA %pM TX buffer for AC %d full - dropping oldest frame\n",
525 ieee80211_free_txskb(&local
->hw
, old
);
527 tx
->local
->total_ps_buffered
++;
529 info
->control
.jiffies
= jiffies
;
530 info
->control
.vif
= &tx
->sdata
->vif
;
531 info
->flags
|= IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
532 info
->flags
&= ~IEEE80211_TX_TEMPORARY_FLAGS
;
533 skb_queue_tail(&sta
->ps_tx_buf
[ac
], tx
->skb
);
534 spin_unlock(&sta
->ps_lock
);
536 if (!timer_pending(&local
->sta_cleanup
))
537 mod_timer(&local
->sta_cleanup
,
538 round_jiffies(jiffies
+
539 STA_INFO_CLEANUP_INTERVAL
));
542 * We queued up some frames, so the TIM bit might
543 * need to be set, recalculate it.
545 sta_info_recalc_tim(sta
);
548 } else if (unlikely(test_sta_flag(sta
, WLAN_STA_PS_STA
))) {
550 "STA %pM in PS mode, but polling/in SP -> send frame\n",
557 static ieee80211_tx_result debug_noinline
558 ieee80211_tx_h_ps_buf(struct ieee80211_tx_data
*tx
)
560 if (unlikely(tx
->flags
& IEEE80211_TX_PS_BUFFERED
))
563 if (tx
->flags
& IEEE80211_TX_UNICAST
)
564 return ieee80211_tx_h_unicast_ps_buf(tx
);
566 return ieee80211_tx_h_multicast_ps_buf(tx
);
569 static ieee80211_tx_result debug_noinline
570 ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data
*tx
)
572 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
574 if (unlikely(tx
->sdata
->control_port_protocol
== tx
->skb
->protocol
)) {
575 if (tx
->sdata
->control_port_no_encrypt
)
576 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
577 info
->control
.flags
|= IEEE80211_TX_CTRL_PORT_CTRL_PROTO
;
578 info
->flags
|= IEEE80211_TX_CTL_USE_MINRATE
;
584 static ieee80211_tx_result debug_noinline
585 ieee80211_tx_h_select_key(struct ieee80211_tx_data
*tx
)
587 struct ieee80211_key
*key
;
588 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
589 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
591 if (unlikely(info
->flags
& IEEE80211_TX_INTFL_DONT_ENCRYPT
))
594 (key
= rcu_dereference(tx
->sta
->ptk
[tx
->sta
->ptk_idx
])))
596 else if (ieee80211_is_mgmt(hdr
->frame_control
) &&
597 is_multicast_ether_addr(hdr
->addr1
) &&
598 ieee80211_is_robust_mgmt_frame(tx
->skb
) &&
599 (key
= rcu_dereference(tx
->sdata
->default_mgmt_key
)))
601 else if (is_multicast_ether_addr(hdr
->addr1
) &&
602 (key
= rcu_dereference(tx
->sdata
->default_multicast_key
)))
604 else if (!is_multicast_ether_addr(hdr
->addr1
) &&
605 (key
= rcu_dereference(tx
->sdata
->default_unicast_key
)))
611 bool skip_hw
= false;
613 tx
->key
->tx_rx_count
++;
614 /* TODO: add threshold stuff again */
616 switch (tx
->key
->conf
.cipher
) {
617 case WLAN_CIPHER_SUITE_WEP40
:
618 case WLAN_CIPHER_SUITE_WEP104
:
619 case WLAN_CIPHER_SUITE_TKIP
:
620 if (!ieee80211_is_data_present(hdr
->frame_control
))
623 case WLAN_CIPHER_SUITE_CCMP
:
624 case WLAN_CIPHER_SUITE_CCMP_256
:
625 case WLAN_CIPHER_SUITE_GCMP
:
626 case WLAN_CIPHER_SUITE_GCMP_256
:
627 if (!ieee80211_is_data_present(hdr
->frame_control
) &&
628 !ieee80211_use_mfp(hdr
->frame_control
, tx
->sta
,
632 skip_hw
= (tx
->key
->conf
.flags
&
633 IEEE80211_KEY_FLAG_SW_MGMT_TX
) &&
634 ieee80211_is_mgmt(hdr
->frame_control
);
636 case WLAN_CIPHER_SUITE_AES_CMAC
:
637 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
638 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
639 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
640 if (!ieee80211_is_mgmt(hdr
->frame_control
))
645 if (unlikely(tx
->key
&& tx
->key
->flags
& KEY_FLAG_TAINTED
&&
646 !ieee80211_is_deauth(hdr
->frame_control
)))
649 if (!skip_hw
&& tx
->key
&&
650 tx
->key
->flags
& KEY_FLAG_UPLOADED_TO_HARDWARE
)
651 info
->control
.hw_key
= &tx
->key
->conf
;
657 static ieee80211_tx_result debug_noinline
658 ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data
*tx
)
660 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
661 struct ieee80211_hdr
*hdr
= (void *)tx
->skb
->data
;
662 struct ieee80211_supported_band
*sband
;
664 struct ieee80211_tx_rate_control txrc
;
665 struct ieee80211_sta_rates
*ratetbl
= NULL
;
668 memset(&txrc
, 0, sizeof(txrc
));
670 sband
= tx
->local
->hw
.wiphy
->bands
[info
->band
];
672 len
= min_t(u32
, tx
->skb
->len
+ FCS_LEN
,
673 tx
->local
->hw
.wiphy
->frag_threshold
);
675 /* set up the tx rate control struct we give the RC algo */
676 txrc
.hw
= &tx
->local
->hw
;
678 txrc
.bss_conf
= &tx
->sdata
->vif
.bss_conf
;
680 txrc
.reported_rate
.idx
= -1;
681 txrc
.rate_idx_mask
= tx
->sdata
->rc_rateidx_mask
[info
->band
];
682 if (txrc
.rate_idx_mask
== (1 << sband
->n_bitrates
) - 1)
683 txrc
.max_rate_idx
= -1;
685 txrc
.max_rate_idx
= fls(txrc
.rate_idx_mask
) - 1;
687 if (tx
->sdata
->rc_has_mcs_mask
[info
->band
])
688 txrc
.rate_idx_mcs_mask
=
689 tx
->sdata
->rc_rateidx_mcs_mask
[info
->band
];
691 txrc
.bss
= (tx
->sdata
->vif
.type
== NL80211_IFTYPE_AP
||
692 tx
->sdata
->vif
.type
== NL80211_IFTYPE_MESH_POINT
||
693 tx
->sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
);
695 /* set up RTS protection if desired */
696 if (len
> tx
->local
->hw
.wiphy
->rts_threshold
) {
700 info
->control
.use_rts
= txrc
.rts
;
701 info
->control
.use_cts_prot
= tx
->sdata
->vif
.bss_conf
.use_cts_prot
;
704 * Use short preamble if the BSS can handle it, but not for
705 * management frames unless we know the receiver can handle
706 * that -- the management frame might be to a station that
707 * just wants a probe response.
709 if (tx
->sdata
->vif
.bss_conf
.use_short_preamble
&&
710 (ieee80211_is_data(hdr
->frame_control
) ||
711 (tx
->sta
&& test_sta_flag(tx
->sta
, WLAN_STA_SHORT_PREAMBLE
))))
712 txrc
.short_preamble
= true;
714 info
->control
.short_preamble
= txrc
.short_preamble
;
717 assoc
= test_sta_flag(tx
->sta
, WLAN_STA_ASSOC
);
720 * Lets not bother rate control if we're associated and cannot
721 * talk to the sta. This should not happen.
723 if (WARN(test_bit(SCAN_SW_SCANNING
, &tx
->local
->scanning
) && assoc
&&
724 !rate_usable_index_exists(sband
, &tx
->sta
->sta
),
725 "%s: Dropped data frame as no usable bitrate found while "
726 "scanning and associated. Target station: "
727 "%pM on %d GHz band\n",
728 tx
->sdata
->name
, hdr
->addr1
,
733 * If we're associated with the sta at this point we know we can at
734 * least send the frame at the lowest bit rate.
736 rate_control_get_rate(tx
->sdata
, tx
->sta
, &txrc
);
738 if (tx
->sta
&& !info
->control
.skip_table
)
739 ratetbl
= rcu_dereference(tx
->sta
->sta
.rates
);
741 if (unlikely(info
->control
.rates
[0].idx
< 0)) {
743 struct ieee80211_tx_rate rate
= {
744 .idx
= ratetbl
->rate
[0].idx
,
745 .flags
= ratetbl
->rate
[0].flags
,
746 .count
= ratetbl
->rate
[0].count
749 if (ratetbl
->rate
[0].idx
< 0)
757 tx
->rate
= info
->control
.rates
[0];
760 if (txrc
.reported_rate
.idx
< 0) {
761 txrc
.reported_rate
= tx
->rate
;
762 if (tx
->sta
&& ieee80211_is_data(hdr
->frame_control
))
763 tx
->sta
->last_tx_rate
= txrc
.reported_rate
;
765 tx
->sta
->last_tx_rate
= txrc
.reported_rate
;
770 if (unlikely(!info
->control
.rates
[0].count
))
771 info
->control
.rates
[0].count
= 1;
773 if (WARN_ON_ONCE((info
->control
.rates
[0].count
> 1) &&
774 (info
->flags
& IEEE80211_TX_CTL_NO_ACK
)))
775 info
->control
.rates
[0].count
= 1;
780 static __le16
ieee80211_tx_next_seq(struct sta_info
*sta
, int tid
)
782 u16
*seq
= &sta
->tid_seq
[tid
];
783 __le16 ret
= cpu_to_le16(*seq
);
785 /* Increase the sequence number. */
786 *seq
= (*seq
+ 0x10) & IEEE80211_SCTL_SEQ
;
791 static ieee80211_tx_result debug_noinline
792 ieee80211_tx_h_sequence(struct ieee80211_tx_data
*tx
)
794 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
795 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)tx
->skb
->data
;
800 * Packet injection may want to control the sequence
801 * number, if we have no matching interface then we
802 * neither assign one ourselves nor ask the driver to.
804 if (unlikely(info
->control
.vif
->type
== NL80211_IFTYPE_MONITOR
))
807 if (unlikely(ieee80211_is_ctl(hdr
->frame_control
)))
810 if (ieee80211_hdrlen(hdr
->frame_control
) < 24)
813 if (ieee80211_is_qos_nullfunc(hdr
->frame_control
))
817 * Anything but QoS data that has a sequence number field
818 * (is long enough) gets a sequence number from the global
819 * counter. QoS data frames with a multicast destination
820 * also use the global counter (802.11-2012 9.3.2.10).
822 if (!ieee80211_is_data_qos(hdr
->frame_control
) ||
823 is_multicast_ether_addr(hdr
->addr1
)) {
824 /* driver should assign sequence number */
825 info
->flags
|= IEEE80211_TX_CTL_ASSIGN_SEQ
;
826 /* for pure STA mode without beacons, we can do it */
827 hdr
->seq_ctrl
= cpu_to_le16(tx
->sdata
->sequence_number
);
828 tx
->sdata
->sequence_number
+= 0x10;
830 tx
->sta
->tx_msdu
[IEEE80211_NUM_TIDS
]++;
835 * This should be true for injected/management frames only, for
836 * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
837 * above since they are not QoS-data frames.
842 /* include per-STA, per-TID sequence counter */
844 qc
= ieee80211_get_qos_ctl(hdr
);
845 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
846 tx
->sta
->tx_msdu
[tid
]++;
848 if (!tx
->sta
->sta
.txq
[0])
849 hdr
->seq_ctrl
= ieee80211_tx_next_seq(tx
->sta
, tid
);
854 static int ieee80211_fragment(struct ieee80211_tx_data
*tx
,
855 struct sk_buff
*skb
, int hdrlen
,
858 struct ieee80211_local
*local
= tx
->local
;
859 struct ieee80211_tx_info
*info
;
861 int per_fragm
= frag_threshold
- hdrlen
- FCS_LEN
;
862 int pos
= hdrlen
+ per_fragm
;
863 int rem
= skb
->len
- hdrlen
- per_fragm
;
865 if (WARN_ON(rem
< 0))
868 /* first fragment was already added to queue by caller */
871 int fraglen
= per_fragm
;
876 tmp
= dev_alloc_skb(local
->tx_headroom
+
878 tx
->sdata
->encrypt_headroom
+
879 IEEE80211_ENCRYPT_TAILROOM
);
883 __skb_queue_tail(&tx
->skbs
, tmp
);
886 local
->tx_headroom
+ tx
->sdata
->encrypt_headroom
);
888 /* copy control information */
889 memcpy(tmp
->cb
, skb
->cb
, sizeof(tmp
->cb
));
891 info
= IEEE80211_SKB_CB(tmp
);
892 info
->flags
&= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT
|
893 IEEE80211_TX_CTL_FIRST_FRAGMENT
);
896 info
->flags
|= IEEE80211_TX_CTL_MORE_FRAMES
;
898 skb_copy_queue_mapping(tmp
, skb
);
899 tmp
->priority
= skb
->priority
;
902 /* copy header and data */
903 memcpy(skb_put(tmp
, hdrlen
), skb
->data
, hdrlen
);
904 memcpy(skb_put(tmp
, fraglen
), skb
->data
+ pos
, fraglen
);
909 /* adjust first fragment's length */
910 skb_trim(skb
, hdrlen
+ per_fragm
);
914 static ieee80211_tx_result debug_noinline
915 ieee80211_tx_h_fragment(struct ieee80211_tx_data
*tx
)
917 struct sk_buff
*skb
= tx
->skb
;
918 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
919 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
920 int frag_threshold
= tx
->local
->hw
.wiphy
->frag_threshold
;
924 /* no matter what happens, tx->skb moves to tx->skbs */
925 __skb_queue_tail(&tx
->skbs
, skb
);
928 if (info
->flags
& IEEE80211_TX_CTL_DONTFRAG
)
931 if (tx
->local
->ops
->set_frag_threshold
)
935 * Warn when submitting a fragmented A-MPDU frame and drop it.
936 * This scenario is handled in ieee80211_tx_prepare but extra
937 * caution taken here as fragmented ampdu may cause Tx stop.
939 if (WARN_ON(info
->flags
& IEEE80211_TX_CTL_AMPDU
))
942 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
944 /* internal error, why isn't DONTFRAG set? */
945 if (WARN_ON(skb
->len
+ FCS_LEN
<= frag_threshold
))
949 * Now fragment the frame. This will allocate all the fragments and
950 * chain them (using skb as the first fragment) to skb->next.
951 * During transmission, we will remove the successfully transmitted
952 * fragments from this list. When the low-level driver rejects one
953 * of the fragments then we will simply pretend to accept the skb
954 * but store it away as pending.
956 if (ieee80211_fragment(tx
, skb
, hdrlen
, frag_threshold
))
959 /* update duration/seq/flags of fragments */
962 skb_queue_walk(&tx
->skbs
, skb
) {
963 const __le16 morefrags
= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS
);
965 hdr
= (void *)skb
->data
;
966 info
= IEEE80211_SKB_CB(skb
);
968 if (!skb_queue_is_last(&tx
->skbs
, skb
)) {
969 hdr
->frame_control
|= morefrags
;
971 * No multi-rate retries for fragmented frames, that
972 * would completely throw off the NAV at other STAs.
974 info
->control
.rates
[1].idx
= -1;
975 info
->control
.rates
[2].idx
= -1;
976 info
->control
.rates
[3].idx
= -1;
977 BUILD_BUG_ON(IEEE80211_TX_MAX_RATES
!= 4);
978 info
->flags
&= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE
;
980 hdr
->frame_control
&= ~morefrags
;
982 hdr
->seq_ctrl
|= cpu_to_le16(fragnum
& IEEE80211_SCTL_FRAG
);
989 static ieee80211_tx_result debug_noinline
990 ieee80211_tx_h_stats(struct ieee80211_tx_data
*tx
)
998 skb_queue_walk(&tx
->skbs
, skb
) {
999 ac
= skb_get_queue_mapping(skb
);
1000 tx
->sta
->tx_bytes
[ac
] += skb
->len
;
1003 tx
->sta
->tx_packets
[ac
]++;
1008 static ieee80211_tx_result debug_noinline
1009 ieee80211_tx_h_encrypt(struct ieee80211_tx_data
*tx
)
1014 switch (tx
->key
->conf
.cipher
) {
1015 case WLAN_CIPHER_SUITE_WEP40
:
1016 case WLAN_CIPHER_SUITE_WEP104
:
1017 return ieee80211_crypto_wep_encrypt(tx
);
1018 case WLAN_CIPHER_SUITE_TKIP
:
1019 return ieee80211_crypto_tkip_encrypt(tx
);
1020 case WLAN_CIPHER_SUITE_CCMP
:
1021 return ieee80211_crypto_ccmp_encrypt(
1022 tx
, IEEE80211_CCMP_MIC_LEN
);
1023 case WLAN_CIPHER_SUITE_CCMP_256
:
1024 return ieee80211_crypto_ccmp_encrypt(
1025 tx
, IEEE80211_CCMP_256_MIC_LEN
);
1026 case WLAN_CIPHER_SUITE_AES_CMAC
:
1027 return ieee80211_crypto_aes_cmac_encrypt(tx
);
1028 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
1029 return ieee80211_crypto_aes_cmac_256_encrypt(tx
);
1030 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
1031 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
1032 return ieee80211_crypto_aes_gmac_encrypt(tx
);
1033 case WLAN_CIPHER_SUITE_GCMP
:
1034 case WLAN_CIPHER_SUITE_GCMP_256
:
1035 return ieee80211_crypto_gcmp_encrypt(tx
);
1037 return ieee80211_crypto_hw_encrypt(tx
);
1043 static ieee80211_tx_result debug_noinline
1044 ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data
*tx
)
1046 struct sk_buff
*skb
;
1047 struct ieee80211_hdr
*hdr
;
1051 skb_queue_walk(&tx
->skbs
, skb
) {
1052 hdr
= (void *) skb
->data
;
1053 if (unlikely(ieee80211_is_pspoll(hdr
->frame_control
)))
1054 break; /* must not overwrite AID */
1055 if (!skb_queue_is_last(&tx
->skbs
, skb
)) {
1056 struct sk_buff
*next
= skb_queue_next(&tx
->skbs
, skb
);
1057 next_len
= next
->len
;
1060 group_addr
= is_multicast_ether_addr(hdr
->addr1
);
1063 ieee80211_duration(tx
, skb
, group_addr
, next_len
);
1069 /* actual transmit path */
1071 static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data
*tx
,
1072 struct sk_buff
*skb
,
1073 struct ieee80211_tx_info
*info
,
1074 struct tid_ampdu_tx
*tid_tx
,
1077 bool queued
= false;
1078 bool reset_agg_timer
= false;
1079 struct sk_buff
*purge_skb
= NULL
;
1081 if (test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
)) {
1082 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1083 reset_agg_timer
= true;
1084 } else if (test_bit(HT_AGG_STATE_WANT_START
, &tid_tx
->state
)) {
1086 * nothing -- this aggregation session is being started
1087 * but that might still fail with the driver
1089 } else if (!tx
->sta
->sta
.txq
[tid
]) {
1090 spin_lock(&tx
->sta
->lock
);
1092 * Need to re-check now, because we may get here
1094 * 1) in the window during which the setup is actually
1095 * already done, but not marked yet because not all
1096 * packets are spliced over to the driver pending
1097 * queue yet -- if this happened we acquire the lock
1098 * either before or after the splice happens, but
1099 * need to recheck which of these cases happened.
1101 * 2) during session teardown, if the OPERATIONAL bit
1102 * was cleared due to the teardown but the pointer
1103 * hasn't been assigned NULL yet (or we loaded it
1104 * before it was assigned) -- in this case it may
1105 * now be NULL which means we should just let the
1106 * packet pass through because splicing the frames
1107 * back is already done.
1109 tid_tx
= rcu_dereference_protected_tid_tx(tx
->sta
, tid
);
1112 /* do nothing, let packet pass through */
1113 } else if (test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
)) {
1114 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1115 reset_agg_timer
= true;
1118 info
->control
.vif
= &tx
->sdata
->vif
;
1119 info
->flags
|= IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
1120 info
->flags
&= ~IEEE80211_TX_TEMPORARY_FLAGS
|
1121 IEEE80211_TX_CTL_NO_PS_BUFFER
|
1122 IEEE80211_TX_STATUS_EOSP
;
1123 __skb_queue_tail(&tid_tx
->pending
, skb
);
1124 if (skb_queue_len(&tid_tx
->pending
) > STA_MAX_TX_BUFFER
)
1125 purge_skb
= __skb_dequeue(&tid_tx
->pending
);
1127 spin_unlock(&tx
->sta
->lock
);
1130 ieee80211_free_txskb(&tx
->local
->hw
, purge_skb
);
1133 /* reset session timer */
1134 if (reset_agg_timer
&& tid_tx
->timeout
)
1135 tid_tx
->last_tx
= jiffies
;
1142 * pass %NULL for the station if unknown, a valid pointer if known
1143 * or an ERR_PTR() if the station is known not to exist
1145 static ieee80211_tx_result
1146 ieee80211_tx_prepare(struct ieee80211_sub_if_data
*sdata
,
1147 struct ieee80211_tx_data
*tx
,
1148 struct sta_info
*sta
, struct sk_buff
*skb
)
1150 struct ieee80211_local
*local
= sdata
->local
;
1151 struct ieee80211_hdr
*hdr
;
1152 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1156 memset(tx
, 0, sizeof(*tx
));
1160 __skb_queue_head_init(&tx
->skbs
);
1163 * If this flag is set to true anywhere, and we get here,
1164 * we are doing the needed processing, so remove the flag
1167 info
->flags
&= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING
;
1169 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1175 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
1176 tx
->sta
= rcu_dereference(sdata
->u
.vlan
.sta
);
1177 if (!tx
->sta
&& sdata
->wdev
.use_4addr
)
1179 } else if (info
->flags
& (IEEE80211_TX_INTFL_NL80211_FRAME_TX
|
1180 IEEE80211_TX_CTL_INJECTED
) ||
1181 tx
->sdata
->control_port_protocol
== tx
->skb
->protocol
) {
1182 tx
->sta
= sta_info_get_bss(sdata
, hdr
->addr1
);
1184 if (!tx
->sta
&& !is_multicast_ether_addr(hdr
->addr1
))
1185 tx
->sta
= sta_info_get(sdata
, hdr
->addr1
);
1188 if (tx
->sta
&& ieee80211_is_data_qos(hdr
->frame_control
) &&
1189 !ieee80211_is_qos_nullfunc(hdr
->frame_control
) &&
1190 ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
) &&
1191 !ieee80211_hw_check(&local
->hw
, TX_AMPDU_SETUP_IN_HW
)) {
1192 struct tid_ampdu_tx
*tid_tx
;
1194 qc
= ieee80211_get_qos_ctl(hdr
);
1195 tid
= *qc
& IEEE80211_QOS_CTL_TID_MASK
;
1197 tid_tx
= rcu_dereference(tx
->sta
->ampdu_mlme
.tid_tx
[tid
]);
1201 queued
= ieee80211_tx_prep_agg(tx
, skb
, info
,
1204 if (unlikely(queued
))
1209 if (is_multicast_ether_addr(hdr
->addr1
)) {
1210 tx
->flags
&= ~IEEE80211_TX_UNICAST
;
1211 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
1213 tx
->flags
|= IEEE80211_TX_UNICAST
;
1215 if (!(info
->flags
& IEEE80211_TX_CTL_DONTFRAG
)) {
1216 if (!(tx
->flags
& IEEE80211_TX_UNICAST
) ||
1217 skb
->len
+ FCS_LEN
<= local
->hw
.wiphy
->frag_threshold
||
1218 info
->flags
& IEEE80211_TX_CTL_AMPDU
)
1219 info
->flags
|= IEEE80211_TX_CTL_DONTFRAG
;
1223 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
;
1224 else if (test_and_clear_sta_flag(tx
->sta
, WLAN_STA_CLEAR_PS_FILT
))
1225 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
;
1227 info
->flags
|= IEEE80211_TX_CTL_FIRST_FRAGMENT
;
1232 static void ieee80211_drv_tx(struct ieee80211_local
*local
,
1233 struct ieee80211_vif
*vif
,
1234 struct ieee80211_sta
*pubsta
,
1235 struct sk_buff
*skb
)
1237 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
1238 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1239 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1240 struct ieee80211_tx_control control
= {
1243 struct ieee80211_txq
*txq
= NULL
;
1244 struct txq_info
*txqi
;
1247 if (info
->control
.flags
& IEEE80211_TX_CTRL_PS_RESPONSE
)
1250 if (!ieee80211_is_data(hdr
->frame_control
))
1254 u8 tid
= skb
->priority
& IEEE80211_QOS_CTL_TID_MASK
;
1256 txq
= pubsta
->txq
[tid
];
1265 txqi
= to_txq_info(txq
);
1266 atomic_inc(&sdata
->txqs_len
[ac
]);
1267 if (atomic_read(&sdata
->txqs_len
[ac
]) >= local
->hw
.txq_ac_max_pending
)
1268 netif_stop_subqueue(sdata
->dev
, ac
);
1270 skb_queue_tail(&txqi
->queue
, skb
);
1271 drv_wake_tx_queue(local
, txqi
);
1276 drv_tx(local
, &control
, skb
);
1279 struct sk_buff
*ieee80211_tx_dequeue(struct ieee80211_hw
*hw
,
1280 struct ieee80211_txq
*txq
)
1282 struct ieee80211_local
*local
= hw_to_local(hw
);
1283 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(txq
->vif
);
1284 struct txq_info
*txqi
= container_of(txq
, struct txq_info
, txq
);
1285 struct ieee80211_hdr
*hdr
;
1286 struct sk_buff
*skb
= NULL
;
1289 spin_lock_bh(&txqi
->queue
.lock
);
1291 if (test_bit(IEEE80211_TXQ_STOP
, &txqi
->flags
))
1294 skb
= __skb_dequeue(&txqi
->queue
);
1298 atomic_dec(&sdata
->txqs_len
[ac
]);
1299 if (__netif_subqueue_stopped(sdata
->dev
, ac
))
1300 ieee80211_propagate_queue_wake(local
, sdata
->vif
.hw_queue
[ac
]);
1302 hdr
= (struct ieee80211_hdr
*)skb
->data
;
1303 if (txq
->sta
&& ieee80211_is_data_qos(hdr
->frame_control
)) {
1304 struct sta_info
*sta
= container_of(txq
->sta
, struct sta_info
,
1306 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1308 hdr
->seq_ctrl
= ieee80211_tx_next_seq(sta
, txq
->tid
);
1309 if (test_bit(IEEE80211_TXQ_AMPDU
, &txqi
->flags
))
1310 info
->flags
|= IEEE80211_TX_CTL_AMPDU
;
1312 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
1316 spin_unlock_bh(&txqi
->queue
.lock
);
1320 EXPORT_SYMBOL(ieee80211_tx_dequeue
);
1322 static bool ieee80211_tx_frags(struct ieee80211_local
*local
,
1323 struct ieee80211_vif
*vif
,
1324 struct ieee80211_sta
*sta
,
1325 struct sk_buff_head
*skbs
,
1328 struct sk_buff
*skb
, *tmp
;
1329 unsigned long flags
;
1331 skb_queue_walk_safe(skbs
, skb
, tmp
) {
1332 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1333 int q
= info
->hw_queue
;
1335 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1336 if (WARN_ON_ONCE(q
>= local
->hw
.queues
)) {
1337 __skb_unlink(skb
, skbs
);
1338 ieee80211_free_txskb(&local
->hw
, skb
);
1343 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
1344 if (local
->queue_stop_reasons
[q
] ||
1345 (!txpending
&& !skb_queue_empty(&local
->pending
[q
]))) {
1346 if (unlikely(info
->flags
&
1347 IEEE80211_TX_INTFL_OFFCHAN_TX_OK
)) {
1348 if (local
->queue_stop_reasons
[q
] &
1349 ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL
)) {
1351 * Drop off-channel frames if queues
1352 * are stopped for any reason other
1353 * than off-channel operation. Never
1356 spin_unlock_irqrestore(
1357 &local
->queue_stop_reason_lock
,
1359 ieee80211_purge_tx_queue(&local
->hw
,
1366 * Since queue is stopped, queue up frames for
1367 * later transmission from the tx-pending
1368 * tasklet when the queue is woken again.
1371 skb_queue_splice_init(skbs
,
1372 &local
->pending
[q
]);
1374 skb_queue_splice_tail_init(skbs
,
1375 &local
->pending
[q
]);
1377 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
1382 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
1384 info
->control
.vif
= vif
;
1386 __skb_unlink(skb
, skbs
);
1387 ieee80211_drv_tx(local
, vif
, sta
, skb
);
1394 * Returns false if the frame couldn't be transmitted but was queued instead.
1396 static bool __ieee80211_tx(struct ieee80211_local
*local
,
1397 struct sk_buff_head
*skbs
, int led_len
,
1398 struct sta_info
*sta
, bool txpending
)
1400 struct ieee80211_tx_info
*info
;
1401 struct ieee80211_sub_if_data
*sdata
;
1402 struct ieee80211_vif
*vif
;
1403 struct ieee80211_sta
*pubsta
;
1404 struct sk_buff
*skb
;
1408 if (WARN_ON(skb_queue_empty(skbs
)))
1411 skb
= skb_peek(skbs
);
1412 fc
= ((struct ieee80211_hdr
*)skb
->data
)->frame_control
;
1413 info
= IEEE80211_SKB_CB(skb
);
1414 sdata
= vif_to_sdata(info
->control
.vif
);
1415 if (sta
&& !sta
->uploaded
)
1423 switch (sdata
->vif
.type
) {
1424 case NL80211_IFTYPE_MONITOR
:
1425 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
) {
1429 sdata
= rcu_dereference(local
->monitor_sdata
);
1433 vif
->hw_queue
[skb_get_queue_mapping(skb
)];
1434 } else if (ieee80211_hw_check(&local
->hw
, QUEUE_CONTROL
)) {
1440 case NL80211_IFTYPE_AP_VLAN
:
1441 sdata
= container_of(sdata
->bss
,
1442 struct ieee80211_sub_if_data
, u
.ap
);
1449 result
= ieee80211_tx_frags(local
, vif
, pubsta
, skbs
,
1452 ieee80211_tpt_led_trig_tx(local
, fc
, led_len
);
1454 WARN_ON_ONCE(!skb_queue_empty(skbs
));
1460 * Invoke TX handlers, return 0 on success and non-zero if the
1461 * frame was dropped or queued.
1463 static int invoke_tx_handlers(struct ieee80211_tx_data
*tx
)
1465 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(tx
->skb
);
1466 ieee80211_tx_result res
= TX_DROP
;
1468 #define CALL_TXH(txh) \
1471 if (res != TX_CONTINUE) \
1475 CALL_TXH(ieee80211_tx_h_dynamic_ps
);
1476 CALL_TXH(ieee80211_tx_h_check_assoc
);
1477 CALL_TXH(ieee80211_tx_h_ps_buf
);
1478 CALL_TXH(ieee80211_tx_h_check_control_port_protocol
);
1479 CALL_TXH(ieee80211_tx_h_select_key
);
1480 if (!ieee80211_hw_check(&tx
->local
->hw
, HAS_RATE_CONTROL
))
1481 CALL_TXH(ieee80211_tx_h_rate_ctrl
);
1483 if (unlikely(info
->flags
& IEEE80211_TX_INTFL_RETRANSMISSION
)) {
1484 __skb_queue_tail(&tx
->skbs
, tx
->skb
);
1489 CALL_TXH(ieee80211_tx_h_michael_mic_add
);
1490 CALL_TXH(ieee80211_tx_h_sequence
);
1491 CALL_TXH(ieee80211_tx_h_fragment
);
1492 /* handlers after fragment must be aware of tx info fragmentation! */
1493 CALL_TXH(ieee80211_tx_h_stats
);
1494 CALL_TXH(ieee80211_tx_h_encrypt
);
1495 if (!ieee80211_hw_check(&tx
->local
->hw
, HAS_RATE_CONTROL
))
1496 CALL_TXH(ieee80211_tx_h_calculate_duration
);
1500 if (unlikely(res
== TX_DROP
)) {
1501 I802_DEBUG_INC(tx
->local
->tx_handlers_drop
);
1503 ieee80211_free_txskb(&tx
->local
->hw
, tx
->skb
);
1505 ieee80211_purge_tx_queue(&tx
->local
->hw
, &tx
->skbs
);
1507 } else if (unlikely(res
== TX_QUEUED
)) {
1508 I802_DEBUG_INC(tx
->local
->tx_handlers_queued
);
1515 bool ieee80211_tx_prepare_skb(struct ieee80211_hw
*hw
,
1516 struct ieee80211_vif
*vif
, struct sk_buff
*skb
,
1517 int band
, struct ieee80211_sta
**sta
)
1519 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1520 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1521 struct ieee80211_tx_data tx
;
1522 struct sk_buff
*skb2
;
1524 if (ieee80211_tx_prepare(sdata
, &tx
, NULL
, skb
) == TX_DROP
)
1528 info
->control
.vif
= vif
;
1529 info
->hw_queue
= vif
->hw_queue
[skb_get_queue_mapping(skb
)];
1531 if (invoke_tx_handlers(&tx
))
1536 *sta
= &tx
.sta
->sta
;
1541 /* this function isn't suitable for fragmented data frames */
1542 skb2
= __skb_dequeue(&tx
.skbs
);
1543 if (WARN_ON(skb2
!= skb
|| !skb_queue_empty(&tx
.skbs
))) {
1544 ieee80211_free_txskb(hw
, skb2
);
1545 ieee80211_purge_tx_queue(hw
, &tx
.skbs
);
1551 EXPORT_SYMBOL(ieee80211_tx_prepare_skb
);
1554 * Returns false if the frame couldn't be transmitted but was queued instead.
1556 static bool ieee80211_tx(struct ieee80211_sub_if_data
*sdata
,
1557 struct sta_info
*sta
, struct sk_buff
*skb
,
1560 struct ieee80211_local
*local
= sdata
->local
;
1561 struct ieee80211_tx_data tx
;
1562 ieee80211_tx_result res_prepare
;
1563 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1567 if (unlikely(skb
->len
< 10)) {
1572 /* initialises tx */
1574 res_prepare
= ieee80211_tx_prepare(sdata
, &tx
, sta
, skb
);
1576 if (unlikely(res_prepare
== TX_DROP
)) {
1577 ieee80211_free_txskb(&local
->hw
, skb
);
1579 } else if (unlikely(res_prepare
== TX_QUEUED
)) {
1583 /* set up hw_queue value early */
1584 if (!(info
->flags
& IEEE80211_TX_CTL_TX_OFFCHAN
) ||
1585 !ieee80211_hw_check(&local
->hw
, QUEUE_CONTROL
))
1587 sdata
->vif
.hw_queue
[skb_get_queue_mapping(skb
)];
1589 if (!invoke_tx_handlers(&tx
))
1590 result
= __ieee80211_tx(local
, &tx
.skbs
, led_len
,
1596 /* device xmit handlers */
1598 static int ieee80211_skb_resize(struct ieee80211_sub_if_data
*sdata
,
1599 struct sk_buff
*skb
,
1600 int head_need
, bool may_encrypt
)
1602 struct ieee80211_local
*local
= sdata
->local
;
1605 if (may_encrypt
&& sdata
->crypto_tx_tailroom_needed_cnt
) {
1606 tail_need
= IEEE80211_ENCRYPT_TAILROOM
;
1607 tail_need
-= skb_tailroom(skb
);
1608 tail_need
= max_t(int, tail_need
, 0);
1611 if (skb_cloned(skb
) &&
1612 (!ieee80211_hw_check(&local
->hw
, SUPPORTS_CLONED_SKBS
) ||
1613 !skb_clone_writable(skb
, ETH_HLEN
) ||
1614 (may_encrypt
&& sdata
->crypto_tx_tailroom_needed_cnt
)))
1615 I802_DEBUG_INC(local
->tx_expand_skb_head_cloned
);
1616 else if (head_need
|| tail_need
)
1617 I802_DEBUG_INC(local
->tx_expand_skb_head
);
1621 if (pskb_expand_head(skb
, head_need
, tail_need
, GFP_ATOMIC
)) {
1622 wiphy_debug(local
->hw
.wiphy
,
1623 "failed to reallocate TX buffer\n");
1630 void ieee80211_xmit(struct ieee80211_sub_if_data
*sdata
,
1631 struct sta_info
*sta
, struct sk_buff
*skb
)
1633 struct ieee80211_local
*local
= sdata
->local
;
1634 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1635 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
1639 may_encrypt
= !(info
->flags
& IEEE80211_TX_INTFL_DONT_ENCRYPT
);
1641 headroom
= local
->tx_headroom
;
1643 headroom
+= sdata
->encrypt_headroom
;
1644 headroom
-= skb_headroom(skb
);
1645 headroom
= max_t(int, 0, headroom
);
1647 if (ieee80211_skb_resize(sdata
, skb
, headroom
, may_encrypt
)) {
1648 ieee80211_free_txskb(&local
->hw
, skb
);
1652 hdr
= (struct ieee80211_hdr
*) skb
->data
;
1653 info
->control
.vif
= &sdata
->vif
;
1655 if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
1656 if (ieee80211_is_data(hdr
->frame_control
) &&
1657 is_unicast_ether_addr(hdr
->addr1
)) {
1658 if (mesh_nexthop_resolve(sdata
, skb
))
1659 return; /* skb queued: don't free */
1661 ieee80211_mps_set_frame_flags(sdata
, NULL
, hdr
);
1665 ieee80211_set_qos_hdr(sdata
, skb
);
1666 ieee80211_tx(sdata
, sta
, skb
, false);
1669 static bool ieee80211_parse_tx_radiotap(struct sk_buff
*skb
)
1671 struct ieee80211_radiotap_iterator iterator
;
1672 struct ieee80211_radiotap_header
*rthdr
=
1673 (struct ieee80211_radiotap_header
*) skb
->data
;
1674 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1675 int ret
= ieee80211_radiotap_iterator_init(&iterator
, rthdr
, skb
->len
,
1679 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
1680 IEEE80211_TX_CTL_DONTFRAG
;
1683 * for every radiotap entry that is present
1684 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
1685 * entries present, or -EINVAL on error)
1689 ret
= ieee80211_radiotap_iterator_next(&iterator
);
1694 /* see if this argument is something we can use */
1695 switch (iterator
.this_arg_index
) {
1697 * You must take care when dereferencing iterator.this_arg
1698 * for multibyte types... the pointer is not aligned. Use
1699 * get_unaligned((type *)iterator.this_arg) to dereference
1700 * iterator.this_arg for type "type" safely on all arches.
1702 case IEEE80211_RADIOTAP_FLAGS
:
1703 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_FCS
) {
1705 * this indicates that the skb we have been
1706 * handed has the 32-bit FCS CRC at the end...
1707 * we should react to that by snipping it off
1708 * because it will be recomputed and added
1711 if (skb
->len
< (iterator
._max_length
+ FCS_LEN
))
1714 skb_trim(skb
, skb
->len
- FCS_LEN
);
1716 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_WEP
)
1717 info
->flags
&= ~IEEE80211_TX_INTFL_DONT_ENCRYPT
;
1718 if (*iterator
.this_arg
& IEEE80211_RADIOTAP_F_FRAG
)
1719 info
->flags
&= ~IEEE80211_TX_CTL_DONTFRAG
;
1722 case IEEE80211_RADIOTAP_TX_FLAGS
:
1723 txflags
= get_unaligned_le16(iterator
.this_arg
);
1724 if (txflags
& IEEE80211_RADIOTAP_F_TX_NOACK
)
1725 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
1729 * Please update the file
1730 * Documentation/networking/mac80211-injection.txt
1731 * when parsing new fields here.
1739 if (ret
!= -ENOENT
) /* ie, if we didn't simply run out of fields */
1743 * remove the radiotap header
1744 * iterator->_max_length was sanity-checked against
1745 * skb->len by iterator init
1747 skb_pull(skb
, iterator
._max_length
);
1752 netdev_tx_t
ieee80211_monitor_start_xmit(struct sk_buff
*skb
,
1753 struct net_device
*dev
)
1755 struct ieee80211_local
*local
= wdev_priv(dev
->ieee80211_ptr
);
1756 struct ieee80211_chanctx_conf
*chanctx_conf
;
1757 struct ieee80211_radiotap_header
*prthdr
=
1758 (struct ieee80211_radiotap_header
*)skb
->data
;
1759 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1760 struct ieee80211_hdr
*hdr
;
1761 struct ieee80211_sub_if_data
*tmp_sdata
, *sdata
;
1762 struct cfg80211_chan_def
*chandef
;
1766 /* check for not even having the fixed radiotap header part */
1767 if (unlikely(skb
->len
< sizeof(struct ieee80211_radiotap_header
)))
1768 goto fail
; /* too short to be possibly valid */
1770 /* is it a header version we can trust to find length from? */
1771 if (unlikely(prthdr
->it_version
))
1772 goto fail
; /* only version 0 is supported */
1774 /* then there must be a radiotap header with a length we can use */
1775 len_rthdr
= ieee80211_get_radiotap_len(skb
->data
);
1777 /* does the skb contain enough to deliver on the alleged length? */
1778 if (unlikely(skb
->len
< len_rthdr
))
1779 goto fail
; /* skb too short for claimed rt header extent */
1782 * fix up the pointers accounting for the radiotap
1783 * header still being in there. We are being given
1784 * a precooked IEEE80211 header so no need for
1787 skb_set_mac_header(skb
, len_rthdr
);
1789 * these are just fixed to the end of the rt area since we
1790 * don't have any better information and at this point, nobody cares
1792 skb_set_network_header(skb
, len_rthdr
);
1793 skb_set_transport_header(skb
, len_rthdr
);
1795 if (skb
->len
< len_rthdr
+ 2)
1798 hdr
= (struct ieee80211_hdr
*)(skb
->data
+ len_rthdr
);
1799 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
1801 if (skb
->len
< len_rthdr
+ hdrlen
)
1805 * Initialize skb->protocol if the injected frame is a data frame
1806 * carrying a rfc1042 header
1808 if (ieee80211_is_data(hdr
->frame_control
) &&
1809 skb
->len
>= len_rthdr
+ hdrlen
+ sizeof(rfc1042_header
) + 2) {
1810 u8
*payload
= (u8
*)hdr
+ hdrlen
;
1812 if (ether_addr_equal(payload
, rfc1042_header
))
1813 skb
->protocol
= cpu_to_be16((payload
[6] << 8) |
1817 memset(info
, 0, sizeof(*info
));
1819 info
->flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
1820 IEEE80211_TX_CTL_INJECTED
;
1822 /* process and remove the injection radiotap header */
1823 if (!ieee80211_parse_tx_radiotap(skb
))
1829 * We process outgoing injected frames that have a local address
1830 * we handle as though they are non-injected frames.
1831 * This code here isn't entirely correct, the local MAC address
1832 * isn't always enough to find the interface to use; for proper
1833 * VLAN/WDS support we will need a different mechanism (which
1834 * likely isn't going to be monitor interfaces).
1836 sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1838 list_for_each_entry_rcu(tmp_sdata
, &local
->interfaces
, list
) {
1839 if (!ieee80211_sdata_running(tmp_sdata
))
1841 if (tmp_sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
||
1842 tmp_sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
||
1843 tmp_sdata
->vif
.type
== NL80211_IFTYPE_WDS
)
1845 if (ether_addr_equal(tmp_sdata
->vif
.addr
, hdr
->addr2
)) {
1851 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
1852 if (!chanctx_conf
) {
1853 tmp_sdata
= rcu_dereference(local
->monitor_sdata
);
1856 rcu_dereference(tmp_sdata
->vif
.chanctx_conf
);
1860 chandef
= &chanctx_conf
->def
;
1861 else if (!local
->use_chanctx
)
1862 chandef
= &local
->_oper_chandef
;
1867 * Frame injection is not allowed if beaconing is not allowed
1868 * or if we need radar detection. Beaconing is usually not allowed when
1869 * the mode or operation (Adhoc, AP, Mesh) does not support DFS.
1870 * Passive scan is also used in world regulatory domains where
1871 * your country is not known and as such it should be treated as
1872 * NO TX unless the channel is explicitly allowed in which case
1873 * your current regulatory domain would not have the passive scan
1876 * Since AP mode uses monitor interfaces to inject/TX management
1877 * frames we can make AP mode the exception to this rule once it
1878 * supports radar detection as its implementation can deal with
1879 * radar detection by itself. We can do that later by adding a
1880 * monitor flag interfaces used for AP support.
1882 if (!cfg80211_reg_can_beacon(local
->hw
.wiphy
, chandef
,
1886 info
->band
= chandef
->chan
->band
;
1887 ieee80211_xmit(sdata
, NULL
, skb
);
1890 return NETDEV_TX_OK
;
1896 return NETDEV_TX_OK
; /* meaning, we dealt with the skb */
1899 static inline bool ieee80211_is_tdls_setup(struct sk_buff
*skb
)
1901 u16 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
1903 return ethertype
== ETH_P_TDLS
&&
1905 skb
->data
[14] == WLAN_TDLS_SNAP_RFTYPE
;
1908 static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data
*sdata
,
1909 struct sk_buff
*skb
,
1910 struct sta_info
**sta_out
)
1912 struct sta_info
*sta
;
1914 switch (sdata
->vif
.type
) {
1915 case NL80211_IFTYPE_AP_VLAN
:
1916 sta
= rcu_dereference(sdata
->u
.vlan
.sta
);
1920 } else if (sdata
->wdev
.use_4addr
) {
1924 case NL80211_IFTYPE_AP
:
1925 case NL80211_IFTYPE_OCB
:
1926 case NL80211_IFTYPE_ADHOC
:
1927 if (is_multicast_ether_addr(skb
->data
)) {
1928 *sta_out
= ERR_PTR(-ENOENT
);
1931 sta
= sta_info_get_bss(sdata
, skb
->data
);
1933 case NL80211_IFTYPE_WDS
:
1934 sta
= sta_info_get(sdata
, sdata
->u
.wds
.remote_addr
);
1936 #ifdef CONFIG_MAC80211_MESH
1937 case NL80211_IFTYPE_MESH_POINT
:
1938 /* determined much later */
1942 case NL80211_IFTYPE_STATION
:
1943 if (sdata
->wdev
.wiphy
->flags
& WIPHY_FLAG_SUPPORTS_TDLS
) {
1944 sta
= sta_info_get(sdata
, skb
->data
);
1946 bool tdls_peer
, tdls_auth
;
1948 tdls_peer
= test_sta_flag(sta
,
1949 WLAN_STA_TDLS_PEER
);
1950 tdls_auth
= test_sta_flag(sta
,
1951 WLAN_STA_TDLS_PEER_AUTH
);
1953 if (tdls_peer
&& tdls_auth
) {
1959 * TDLS link during setup - throw out frames to
1960 * peer. Allow TDLS-setup frames to unauthorized
1961 * peers for the special case of a link teardown
1962 * after a TDLS sta is removed due to being
1965 if (tdls_peer
&& !tdls_auth
&&
1966 !ieee80211_is_tdls_setup(skb
))
1972 sta
= sta_info_get(sdata
, sdata
->u
.mgd
.bssid
);
1980 *sta_out
= sta
?: ERR_PTR(-ENOENT
);
1985 * ieee80211_build_hdr - build 802.11 header in the given frame
1986 * @sdata: virtual interface to build the header for
1987 * @skb: the skb to build the header in
1988 * @info_flags: skb flags to set
1990 * This function takes the skb with 802.3 header and reformats the header to
1991 * the appropriate IEEE 802.11 header based on which interface the packet is
1992 * being transmitted on.
1994 * Note that this function also takes care of the TX status request and
1995 * potential unsharing of the SKB - this needs to be interleaved with the
1998 * The function requires the read-side RCU lock held
2000 * Returns: the (possibly reallocated) skb or an ERR_PTR() code
2002 static struct sk_buff
*ieee80211_build_hdr(struct ieee80211_sub_if_data
*sdata
,
2003 struct sk_buff
*skb
, u32 info_flags
,
2004 struct sta_info
*sta
)
2006 struct ieee80211_local
*local
= sdata
->local
;
2007 struct ieee80211_tx_info
*info
;
2009 u16 ethertype
, hdrlen
, meshhdrlen
= 0;
2011 struct ieee80211_hdr hdr
;
2012 struct ieee80211s_hdr mesh_hdr __maybe_unused
;
2013 struct mesh_path __maybe_unused
*mppath
= NULL
, *mpath
= NULL
;
2014 const u8
*encaps_data
;
2015 int encaps_len
, skip_header_bytes
;
2017 bool wme_sta
= false, authorized
= false;
2021 struct ieee80211_chanctx_conf
*chanctx_conf
;
2022 struct ieee80211_sub_if_data
*ap_sdata
;
2023 enum ieee80211_band band
;
2029 /* convert Ethernet header to proper 802.11 header (based on
2030 * operation mode) */
2031 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
2032 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_DATA
);
2034 switch (sdata
->vif
.type
) {
2035 case NL80211_IFTYPE_AP_VLAN
:
2036 if (sdata
->wdev
.use_4addr
) {
2037 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
2039 memcpy(hdr
.addr1
, sta
->sta
.addr
, ETH_ALEN
);
2040 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2041 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2042 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2044 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
2045 wme_sta
= sta
->sta
.wme
;
2047 ap_sdata
= container_of(sdata
->bss
, struct ieee80211_sub_if_data
,
2049 chanctx_conf
= rcu_dereference(ap_sdata
->vif
.chanctx_conf
);
2050 if (!chanctx_conf
) {
2054 band
= chanctx_conf
->def
.chan
->band
;
2055 if (sdata
->wdev
.use_4addr
)
2058 case NL80211_IFTYPE_AP
:
2059 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
2060 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2061 if (!chanctx_conf
) {
2065 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
2067 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2068 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2069 memcpy(hdr
.addr3
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2071 band
= chanctx_conf
->def
.chan
->band
;
2073 case NL80211_IFTYPE_WDS
:
2074 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
2076 memcpy(hdr
.addr1
, sdata
->u
.wds
.remote_addr
, ETH_ALEN
);
2077 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2078 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2079 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2082 * This is the exception! WDS style interfaces are prohibited
2083 * when channel contexts are in used so this must be valid
2085 band
= local
->hw
.conf
.chandef
.chan
->band
;
2087 #ifdef CONFIG_MAC80211_MESH
2088 case NL80211_IFTYPE_MESH_POINT
:
2089 if (!is_multicast_ether_addr(skb
->data
)) {
2090 struct sta_info
*next_hop
;
2091 bool mpp_lookup
= true;
2093 mpath
= mesh_path_lookup(sdata
, skb
->data
);
2096 next_hop
= rcu_dereference(mpath
->next_hop
);
2098 !(mpath
->flags
& (MESH_PATH_ACTIVE
|
2099 MESH_PATH_RESOLVING
)))
2104 mppath
= mpp_path_lookup(sdata
, skb
->data
);
2106 if (mppath
&& mpath
)
2107 mesh_path_del(mpath
->sdata
, mpath
->dst
);
2111 * Use address extension if it is a packet from
2112 * another interface or if we know the destination
2113 * is being proxied by a portal (i.e. portal address
2114 * differs from proxied address)
2116 if (ether_addr_equal(sdata
->vif
.addr
, skb
->data
+ ETH_ALEN
) &&
2117 !(mppath
&& !ether_addr_equal(mppath
->mpp
, skb
->data
))) {
2118 hdrlen
= ieee80211_fill_mesh_addresses(&hdr
, &fc
,
2119 skb
->data
, skb
->data
+ ETH_ALEN
);
2120 meshhdrlen
= ieee80211_new_mesh_header(sdata
, &mesh_hdr
,
2123 /* DS -> MBSS (802.11-2012 13.11.3.3).
2124 * For unicast with unknown forwarding information,
2125 * destination might be in the MBSS or if that fails
2126 * forwarded to another mesh gate. In either case
2127 * resolution will be handled in ieee80211_xmit(), so
2128 * leave the original DA. This also works for mcast */
2129 const u8
*mesh_da
= skb
->data
;
2132 mesh_da
= mppath
->mpp
;
2134 mesh_da
= mpath
->dst
;
2136 hdrlen
= ieee80211_fill_mesh_addresses(&hdr
, &fc
,
2137 mesh_da
, sdata
->vif
.addr
);
2138 if (is_multicast_ether_addr(mesh_da
))
2139 /* DA TA mSA AE:SA */
2140 meshhdrlen
= ieee80211_new_mesh_header(
2142 skb
->data
+ ETH_ALEN
, NULL
);
2144 /* RA TA mDA mSA AE:DA SA */
2145 meshhdrlen
= ieee80211_new_mesh_header(
2146 sdata
, &mesh_hdr
, skb
->data
,
2147 skb
->data
+ ETH_ALEN
);
2150 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2151 if (!chanctx_conf
) {
2155 band
= chanctx_conf
->def
.chan
->band
;
2158 case NL80211_IFTYPE_STATION
:
2159 /* we already did checks when looking up the RA STA */
2160 tdls_peer
= test_sta_flag(sta
, WLAN_STA_TDLS_PEER
);
2164 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2165 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2166 memcpy(hdr
.addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2168 } else if (sdata
->u
.mgd
.use_4addr
&&
2169 cpu_to_be16(ethertype
) != sdata
->control_port_protocol
) {
2170 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2171 IEEE80211_FCTL_TODS
);
2173 memcpy(hdr
.addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2174 memcpy(hdr
.addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2175 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2176 memcpy(hdr
.addr4
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2179 fc
|= cpu_to_le16(IEEE80211_FCTL_TODS
);
2181 memcpy(hdr
.addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2182 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2183 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
2186 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2187 if (!chanctx_conf
) {
2191 band
= chanctx_conf
->def
.chan
->band
;
2193 case NL80211_IFTYPE_OCB
:
2195 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2196 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2197 eth_broadcast_addr(hdr
.addr3
);
2199 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2200 if (!chanctx_conf
) {
2204 band
= chanctx_conf
->def
.chan
->band
;
2206 case NL80211_IFTYPE_ADHOC
:
2208 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
2209 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
2210 memcpy(hdr
.addr3
, sdata
->u
.ibss
.bssid
, ETH_ALEN
);
2212 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2213 if (!chanctx_conf
) {
2217 band
= chanctx_conf
->def
.chan
->band
;
2224 multicast
= is_multicast_ether_addr(hdr
.addr1
);
2226 /* sta is always NULL for mesh */
2228 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
2229 wme_sta
= sta
->sta
.wme
;
2230 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
2231 /* For mesh, the use of the QoS header is mandatory */
2235 /* receiver does QoS (which also means we do) use it */
2237 fc
|= cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
2242 * Drop unicast frames to unauthorised stations unless they are
2243 * EAPOL frames from the local station.
2245 if (unlikely(!ieee80211_vif_is_mesh(&sdata
->vif
) &&
2246 (sdata
->vif
.type
!= NL80211_IFTYPE_OCB
) &&
2247 !multicast
&& !authorized
&&
2248 (cpu_to_be16(ethertype
) != sdata
->control_port_protocol
||
2249 !ether_addr_equal(sdata
->vif
.addr
, skb
->data
+ ETH_ALEN
)))) {
2250 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2251 net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n",
2252 sdata
->name
, hdr
.addr1
);
2255 I802_DEBUG_INC(local
->tx_handlers_drop_unauth_port
);
2261 if (unlikely(!multicast
&& skb
->sk
&&
2262 skb_shinfo(skb
)->tx_flags
& SKBTX_WIFI_STATUS
)) {
2263 struct sk_buff
*ack_skb
= skb_clone_sk(skb
);
2266 unsigned long flags
;
2269 spin_lock_irqsave(&local
->ack_status_lock
, flags
);
2270 id
= idr_alloc(&local
->ack_status_frames
, ack_skb
,
2271 1, 0x10000, GFP_ATOMIC
);
2272 spin_unlock_irqrestore(&local
->ack_status_lock
, flags
);
2276 info_flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
;
2284 * If the skb is shared we need to obtain our own copy.
2286 if (skb_shared(skb
)) {
2287 struct sk_buff
*tmp_skb
= skb
;
2289 /* can't happen -- skb is a clone if info_id != 0 */
2292 skb
= skb_clone(skb
, GFP_ATOMIC
);
2301 hdr
.frame_control
= fc
;
2302 hdr
.duration_id
= 0;
2305 skip_header_bytes
= ETH_HLEN
;
2306 if (ethertype
== ETH_P_AARP
|| ethertype
== ETH_P_IPX
) {
2307 encaps_data
= bridge_tunnel_header
;
2308 encaps_len
= sizeof(bridge_tunnel_header
);
2309 skip_header_bytes
-= 2;
2310 } else if (ethertype
>= ETH_P_802_3_MIN
) {
2311 encaps_data
= rfc1042_header
;
2312 encaps_len
= sizeof(rfc1042_header
);
2313 skip_header_bytes
-= 2;
2319 nh_pos
= skb_network_header(skb
) - skb
->data
;
2320 h_pos
= skb_transport_header(skb
) - skb
->data
;
2322 skb_pull(skb
, skip_header_bytes
);
2323 nh_pos
-= skip_header_bytes
;
2324 h_pos
-= skip_header_bytes
;
2326 head_need
= hdrlen
+ encaps_len
+ meshhdrlen
- skb_headroom(skb
);
2329 * So we need to modify the skb header and hence need a copy of
2330 * that. The head_need variable above doesn't, so far, include
2331 * the needed header space that we don't need right away. If we
2332 * can, then we don't reallocate right now but only after the
2333 * frame arrives at the master device (if it does...)
2335 * If we cannot, however, then we will reallocate to include all
2336 * the ever needed space. Also, if we need to reallocate it anyway,
2337 * make it big enough for everything we may ever need.
2340 if (head_need
> 0 || skb_cloned(skb
)) {
2341 head_need
+= sdata
->encrypt_headroom
;
2342 head_need
+= local
->tx_headroom
;
2343 head_need
= max_t(int, 0, head_need
);
2344 if (ieee80211_skb_resize(sdata
, skb
, head_need
, true)) {
2345 ieee80211_free_txskb(&local
->hw
, skb
);
2347 return ERR_PTR(-ENOMEM
);
2352 memcpy(skb_push(skb
, encaps_len
), encaps_data
, encaps_len
);
2353 nh_pos
+= encaps_len
;
2354 h_pos
+= encaps_len
;
2357 #ifdef CONFIG_MAC80211_MESH
2358 if (meshhdrlen
> 0) {
2359 memcpy(skb_push(skb
, meshhdrlen
), &mesh_hdr
, meshhdrlen
);
2360 nh_pos
+= meshhdrlen
;
2361 h_pos
+= meshhdrlen
;
2365 if (ieee80211_is_data_qos(fc
)) {
2366 __le16
*qos_control
;
2368 qos_control
= (__le16
*) skb_push(skb
, 2);
2369 memcpy(skb_push(skb
, hdrlen
- 2), &hdr
, hdrlen
- 2);
2371 * Maybe we could actually set some fields here, for now just
2372 * initialise to zero to indicate no special operation.
2376 memcpy(skb_push(skb
, hdrlen
), &hdr
, hdrlen
);
2381 /* Update skb pointers to various headers since this modified frame
2382 * is going to go through Linux networking code that may potentially
2383 * need things like pointer to IP header. */
2384 skb_set_mac_header(skb
, 0);
2385 skb_set_network_header(skb
, nh_pos
);
2386 skb_set_transport_header(skb
, h_pos
);
2388 info
= IEEE80211_SKB_CB(skb
);
2389 memset(info
, 0, sizeof(*info
));
2391 info
->flags
= info_flags
;
2392 info
->ack_frame_id
= info_id
;
2398 return ERR_PTR(ret
);
2402 * fast-xmit overview
2404 * The core idea of this fast-xmit is to remove per-packet checks by checking
2405 * them out of band. ieee80211_check_fast_xmit() implements the out-of-band
2406 * checks that are needed to get the sta->fast_tx pointer assigned, after which
2407 * much less work can be done per packet. For example, fragmentation must be
2408 * disabled or the fast_tx pointer will not be set. All the conditions are seen
2411 * Once assigned, the fast_tx data structure also caches the per-packet 802.11
2412 * header and other data to aid packet processing in ieee80211_xmit_fast().
2414 * The most difficult part of this is that when any of these assumptions
2415 * change, an external trigger (i.e. a call to ieee80211_clear_fast_xmit(),
2416 * ieee80211_check_fast_xmit() or friends) is required to reset the data,
2417 * since the per-packet code no longer checks the conditions. This is reflected
2418 * by the calls to these functions throughout the rest of the code, and must be
2419 * maintained if any of the TX path checks change.
2422 void ieee80211_check_fast_xmit(struct sta_info
*sta
)
2424 struct ieee80211_fast_tx build
= {}, *fast_tx
= NULL
, *old
;
2425 struct ieee80211_local
*local
= sta
->local
;
2426 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
2427 struct ieee80211_hdr
*hdr
= (void *)build
.hdr
;
2428 struct ieee80211_chanctx_conf
*chanctx_conf
;
2431 if (!ieee80211_hw_check(&local
->hw
, SUPPORT_FAST_XMIT
))
2434 /* Locking here protects both the pointer itself, and against concurrent
2435 * invocations winning data access races to, e.g., the key pointer that
2437 * Without it, the invocation of this function right after the key
2438 * pointer changes wouldn't be sufficient, as another CPU could access
2439 * the pointer, then stall, and then do the cache update after the CPU
2440 * that invalidated the key.
2441 * With the locking, such scenarios cannot happen as the check for the
2442 * key and the fast-tx assignment are done atomically, so the CPU that
2443 * modifies the key will either wait or other one will see the key
2444 * cleared/changed already.
2446 spin_lock_bh(&sta
->lock
);
2447 if (ieee80211_hw_check(&local
->hw
, SUPPORTS_PS
) &&
2448 !ieee80211_hw_check(&local
->hw
, SUPPORTS_DYNAMIC_PS
) &&
2449 sdata
->vif
.type
== NL80211_IFTYPE_STATION
)
2452 if (!test_sta_flag(sta
, WLAN_STA_AUTHORIZED
))
2455 if (test_sta_flag(sta
, WLAN_STA_PS_STA
) ||
2456 test_sta_flag(sta
, WLAN_STA_PS_DRIVER
) ||
2457 test_sta_flag(sta
, WLAN_STA_PS_DELIVER
))
2460 if (sdata
->noack_map
)
2463 /* fast-xmit doesn't handle fragmentation at all */
2464 if (local
->hw
.wiphy
->frag_threshold
!= (u32
)-1 &&
2465 !local
->ops
->set_frag_threshold
)
2469 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
2470 if (!chanctx_conf
) {
2474 build
.band
= chanctx_conf
->def
.chan
->band
;
2477 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_DATA
);
2479 switch (sdata
->vif
.type
) {
2480 case NL80211_IFTYPE_ADHOC
:
2482 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2483 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2484 memcpy(hdr
->addr3
, sdata
->u
.ibss
.bssid
, ETH_ALEN
);
2487 case NL80211_IFTYPE_STATION
:
2488 if (test_sta_flag(sta
, WLAN_STA_TDLS_PEER
)) {
2490 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2491 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2492 memcpy(hdr
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2497 if (sdata
->u
.mgd
.use_4addr
) {
2498 /* non-regular ethertype cannot use the fastpath */
2499 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2500 IEEE80211_FCTL_TODS
);
2502 memcpy(hdr
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2503 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2504 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2505 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr4
);
2509 fc
|= cpu_to_le16(IEEE80211_FCTL_TODS
);
2511 memcpy(hdr
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
2512 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2513 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr2
);
2516 case NL80211_IFTYPE_AP_VLAN
:
2517 if (sdata
->wdev
.use_4addr
) {
2518 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
|
2519 IEEE80211_FCTL_TODS
);
2521 memcpy(hdr
->addr1
, sta
->sta
.addr
, ETH_ALEN
);
2522 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2523 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2524 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr4
);
2529 case NL80211_IFTYPE_AP
:
2530 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
2532 build
.da_offs
= offsetof(struct ieee80211_hdr
, addr1
);
2533 memcpy(hdr
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
2534 build
.sa_offs
= offsetof(struct ieee80211_hdr
, addr3
);
2538 /* not handled on fast-xmit */
2544 fc
|= cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
2547 /* We store the key here so there's no point in using rcu_dereference()
2548 * but that's fine because the code that changes the pointers will call
2549 * this function after doing so. For a single CPU that would be enough,
2550 * for multiple see the comment above.
2552 build
.key
= rcu_access_pointer(sta
->ptk
[sta
->ptk_idx
]);
2554 build
.key
= rcu_access_pointer(sdata
->default_unicast_key
);
2556 bool gen_iv
, iv_spc
, mmic
;
2558 gen_iv
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_GENERATE_IV
;
2559 iv_spc
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_PUT_IV_SPACE
;
2560 mmic
= build
.key
->conf
.flags
& IEEE80211_KEY_FLAG_GENERATE_MMIC
;
2562 /* don't handle software crypto */
2563 if (!(build
.key
->flags
& KEY_FLAG_UPLOADED_TO_HARDWARE
))
2566 switch (build
.key
->conf
.cipher
) {
2567 case WLAN_CIPHER_SUITE_CCMP
:
2568 case WLAN_CIPHER_SUITE_CCMP_256
:
2569 /* add fixed key ID */
2571 (build
.hdr
+ build
.hdr_len
)[3] =
2572 0x20 | (build
.key
->conf
.keyidx
<< 6);
2573 build
.pn_offs
= build
.hdr_len
;
2575 if (gen_iv
|| iv_spc
)
2576 build
.hdr_len
+= IEEE80211_CCMP_HDR_LEN
;
2578 case WLAN_CIPHER_SUITE_GCMP
:
2579 case WLAN_CIPHER_SUITE_GCMP_256
:
2580 /* add fixed key ID */
2582 (build
.hdr
+ build
.hdr_len
)[3] =
2583 0x20 | (build
.key
->conf
.keyidx
<< 6);
2584 build
.pn_offs
= build
.hdr_len
;
2586 if (gen_iv
|| iv_spc
)
2587 build
.hdr_len
+= IEEE80211_GCMP_HDR_LEN
;
2589 case WLAN_CIPHER_SUITE_TKIP
:
2590 /* cannot handle MMIC or IV generation in xmit-fast */
2594 build
.hdr_len
+= IEEE80211_TKIP_IV_LEN
;
2596 case WLAN_CIPHER_SUITE_WEP40
:
2597 case WLAN_CIPHER_SUITE_WEP104
:
2598 /* cannot handle IV generation in fast-xmit */
2602 build
.hdr_len
+= IEEE80211_WEP_IV_LEN
;
2604 case WLAN_CIPHER_SUITE_AES_CMAC
:
2605 case WLAN_CIPHER_SUITE_BIP_CMAC_256
:
2606 case WLAN_CIPHER_SUITE_BIP_GMAC_128
:
2607 case WLAN_CIPHER_SUITE_BIP_GMAC_256
:
2609 "management cipher suite 0x%x enabled for data\n",
2610 build
.key
->conf
.cipher
);
2613 /* we don't know how to generate IVs for this at all */
2614 if (WARN_ON(gen_iv
))
2616 /* pure hardware keys are OK, of course */
2617 if (!(build
.key
->flags
& KEY_FLAG_CIPHER_SCHEME
))
2619 /* cipher scheme might require space allocation */
2621 build
.key
->conf
.iv_len
> IEEE80211_FAST_XMIT_MAX_IV
)
2624 build
.hdr_len
+= build
.key
->conf
.iv_len
;
2627 fc
|= cpu_to_le16(IEEE80211_FCTL_PROTECTED
);
2630 hdr
->frame_control
= fc
;
2632 memcpy(build
.hdr
+ build
.hdr_len
,
2633 rfc1042_header
, sizeof(rfc1042_header
));
2634 build
.hdr_len
+= sizeof(rfc1042_header
);
2636 fast_tx
= kmemdup(&build
, sizeof(build
), GFP_ATOMIC
);
2637 /* if the kmemdup fails, continue w/o fast_tx */
2642 /* we might have raced against another call to this function */
2643 old
= rcu_dereference_protected(sta
->fast_tx
,
2644 lockdep_is_held(&sta
->lock
));
2645 rcu_assign_pointer(sta
->fast_tx
, fast_tx
);
2647 kfree_rcu(old
, rcu_head
);
2648 spin_unlock_bh(&sta
->lock
);
2651 void ieee80211_check_fast_xmit_all(struct ieee80211_local
*local
)
2653 struct sta_info
*sta
;
2656 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
)
2657 ieee80211_check_fast_xmit(sta
);
2661 void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data
*sdata
)
2663 struct ieee80211_local
*local
= sdata
->local
;
2664 struct sta_info
*sta
;
2668 list_for_each_entry_rcu(sta
, &local
->sta_list
, list
) {
2669 if (sdata
!= sta
->sdata
&&
2670 (!sta
->sdata
->bss
|| sta
->sdata
->bss
!= sdata
->bss
))
2672 ieee80211_check_fast_xmit(sta
);
2678 void ieee80211_clear_fast_xmit(struct sta_info
*sta
)
2680 struct ieee80211_fast_tx
*fast_tx
;
2682 spin_lock_bh(&sta
->lock
);
2683 fast_tx
= rcu_dereference_protected(sta
->fast_tx
,
2684 lockdep_is_held(&sta
->lock
));
2685 RCU_INIT_POINTER(sta
->fast_tx
, NULL
);
2686 spin_unlock_bh(&sta
->lock
);
2689 kfree_rcu(fast_tx
, rcu_head
);
2692 static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data
*sdata
,
2693 struct net_device
*dev
, struct sta_info
*sta
,
2694 struct ieee80211_fast_tx
*fast_tx
,
2695 struct sk_buff
*skb
)
2697 struct ieee80211_local
*local
= sdata
->local
;
2698 u16 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
2699 int extra_head
= fast_tx
->hdr_len
- (ETH_HLEN
- 2);
2700 int hw_headroom
= sdata
->local
->hw
.extra_tx_headroom
;
2702 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2703 struct ieee80211_hdr
*hdr
= (void *)fast_tx
->hdr
;
2704 struct ieee80211_tx_data tx
;
2705 ieee80211_tx_result r
;
2706 struct tid_ampdu_tx
*tid_tx
= NULL
;
2707 u8 tid
= IEEE80211_NUM_TIDS
;
2709 /* control port protocol needs a lot of special handling */
2710 if (cpu_to_be16(ethertype
) == sdata
->control_port_protocol
)
2713 /* only RFC 1042 SNAP */
2714 if (ethertype
< ETH_P_802_3_MIN
)
2717 /* don't handle TX status request here either */
2718 if (skb
->sk
&& skb_shinfo(skb
)->tx_flags
& SKBTX_WIFI_STATUS
)
2721 if (hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_QOS_DATA
)) {
2722 tid
= skb
->priority
& IEEE80211_QOS_CTL_TAG1D_MASK
;
2723 tid_tx
= rcu_dereference(sta
->ampdu_mlme
.tid_tx
[tid
]);
2725 if (!test_bit(HT_AGG_STATE_OPERATIONAL
, &tid_tx
->state
))
2727 if (tid_tx
->timeout
)
2728 tid_tx
->last_tx
= jiffies
;
2732 /* after this point (skb is modified) we cannot return false */
2734 if (skb_shared(skb
)) {
2735 struct sk_buff
*tmp_skb
= skb
;
2737 skb
= skb_clone(skb
, GFP_ATOMIC
);
2744 ieee80211_tx_stats(dev
, skb
->len
+ extra_head
);
2746 /* will not be crypto-handled beyond what we do here, so use false
2747 * as the may-encrypt argument for the resize to not account for
2748 * more room than we already have in 'extra_head'
2750 if (unlikely(ieee80211_skb_resize(sdata
, skb
,
2751 max_t(int, extra_head
+ hw_headroom
-
2752 skb_headroom(skb
), 0),
2758 memcpy(ð
, skb
->data
, ETH_HLEN
- 2);
2759 hdr
= (void *)skb_push(skb
, extra_head
);
2760 memcpy(skb
->data
, fast_tx
->hdr
, fast_tx
->hdr_len
);
2761 memcpy(skb
->data
+ fast_tx
->da_offs
, eth
.h_dest
, ETH_ALEN
);
2762 memcpy(skb
->data
+ fast_tx
->sa_offs
, eth
.h_source
, ETH_ALEN
);
2764 memset(info
, 0, sizeof(*info
));
2765 info
->band
= fast_tx
->band
;
2766 info
->control
.vif
= &sdata
->vif
;
2767 info
->flags
= IEEE80211_TX_CTL_FIRST_FRAGMENT
|
2768 IEEE80211_TX_CTL_DONTFRAG
|
2769 (tid_tx
? IEEE80211_TX_CTL_AMPDU
: 0);
2771 if (hdr
->frame_control
& cpu_to_le16(IEEE80211_STYPE_QOS_DATA
)) {
2772 *ieee80211_get_qos_ctl(hdr
) = tid
;
2773 hdr
->seq_ctrl
= ieee80211_tx_next_seq(sta
, tid
);
2775 info
->flags
|= IEEE80211_TX_CTL_ASSIGN_SEQ
;
2776 hdr
->seq_ctrl
= cpu_to_le16(sdata
->sequence_number
);
2777 sdata
->sequence_number
+= 0x10;
2780 sta
->tx_msdu
[tid
]++;
2782 info
->hw_queue
= sdata
->vif
.hw_queue
[skb_get_queue_mapping(skb
)];
2784 __skb_queue_head_init(&tx
.skbs
);
2786 tx
.flags
= IEEE80211_TX_UNICAST
;
2790 tx
.key
= fast_tx
->key
;
2793 info
->control
.hw_key
= &fast_tx
->key
->conf
;
2795 if (!ieee80211_hw_check(&local
->hw
, HAS_RATE_CONTROL
)) {
2797 r
= ieee80211_tx_h_rate_ctrl(&tx
);
2801 if (r
!= TX_CONTINUE
) {
2808 /* statistics normally done by ieee80211_tx_h_stats (but that
2809 * has to consider fragmentation, so is more complex)
2811 sta
->tx_bytes
[skb_get_queue_mapping(skb
)] += skb
->len
;
2812 sta
->tx_packets
[skb_get_queue_mapping(skb
)]++;
2814 if (fast_tx
->pn_offs
) {
2816 u8
*crypto_hdr
= skb
->data
+ fast_tx
->pn_offs
;
2818 switch (fast_tx
->key
->conf
.cipher
) {
2819 case WLAN_CIPHER_SUITE_CCMP
:
2820 case WLAN_CIPHER_SUITE_CCMP_256
:
2821 case WLAN_CIPHER_SUITE_GCMP
:
2822 case WLAN_CIPHER_SUITE_GCMP_256
:
2823 pn
= atomic64_inc_return(&fast_tx
->key
->conf
.tx_pn
);
2825 crypto_hdr
[1] = pn
>> 8;
2826 crypto_hdr
[4] = pn
>> 16;
2827 crypto_hdr
[5] = pn
>> 24;
2828 crypto_hdr
[6] = pn
>> 32;
2829 crypto_hdr
[7] = pn
>> 40;
2834 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)
2835 sdata
= container_of(sdata
->bss
,
2836 struct ieee80211_sub_if_data
, u
.ap
);
2838 __skb_queue_tail(&tx
.skbs
, skb
);
2839 ieee80211_tx_frags(local
, &sdata
->vif
, &sta
->sta
, &tx
.skbs
, false);
2843 void __ieee80211_subif_start_xmit(struct sk_buff
*skb
,
2844 struct net_device
*dev
,
2847 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
2848 struct sta_info
*sta
;
2849 struct sk_buff
*next
;
2851 if (unlikely(skb
->len
< ETH_HLEN
)) {
2858 if (ieee80211_lookup_ra_sta(sdata
, skb
, &sta
))
2861 if (!IS_ERR_OR_NULL(sta
)) {
2862 struct ieee80211_fast_tx
*fast_tx
;
2864 fast_tx
= rcu_dereference(sta
->fast_tx
);
2867 ieee80211_xmit_fast(sdata
, dev
, sta
, fast_tx
, skb
))
2871 if (skb_is_gso(skb
)) {
2872 struct sk_buff
*segs
;
2874 segs
= skb_gso_segment(skb
, 0);
2882 /* we cannot process non-linear frames on this path */
2883 if (skb_linearize(skb
)) {
2888 /* the frame could be fragmented, software-encrypted, and other
2889 * things so we cannot really handle checksum offload with it -
2890 * fix it up in software before we handle anything else.
2892 if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
2893 skb_set_transport_header(skb
,
2894 skb_checksum_start_offset(skb
));
2895 if (skb_checksum_help(skb
))
2908 skb
= ieee80211_build_hdr(sdata
, skb
, info_flags
, sta
);
2912 ieee80211_tx_stats(dev
, skb
->len
);
2914 ieee80211_xmit(sdata
, sta
, skb
);
2924 * ieee80211_subif_start_xmit - netif start_xmit function for 802.3 vifs
2925 * @skb: packet to be sent
2926 * @dev: incoming interface
2928 * On failure skb will be freed.
2930 netdev_tx_t
ieee80211_subif_start_xmit(struct sk_buff
*skb
,
2931 struct net_device
*dev
)
2933 __ieee80211_subif_start_xmit(skb
, dev
, 0);
2934 return NETDEV_TX_OK
;
2938 ieee80211_build_data_template(struct ieee80211_sub_if_data
*sdata
,
2939 struct sk_buff
*skb
, u32 info_flags
)
2941 struct ieee80211_hdr
*hdr
;
2942 struct ieee80211_tx_data tx
= {
2943 .local
= sdata
->local
,
2946 struct sta_info
*sta
;
2950 if (ieee80211_lookup_ra_sta(sdata
, skb
, &sta
)) {
2952 skb
= ERR_PTR(-EINVAL
);
2956 skb
= ieee80211_build_hdr(sdata
, skb
, info_flags
, sta
);
2960 hdr
= (void *)skb
->data
;
2961 tx
.sta
= sta_info_get(sdata
, hdr
->addr1
);
2964 if (ieee80211_tx_h_select_key(&tx
) != TX_CONTINUE
) {
2967 return ERR_PTR(-EINVAL
);
2976 * ieee80211_clear_tx_pending may not be called in a context where
2977 * it is possible that it packets could come in again.
2979 void ieee80211_clear_tx_pending(struct ieee80211_local
*local
)
2981 struct sk_buff
*skb
;
2984 for (i
= 0; i
< local
->hw
.queues
; i
++) {
2985 while ((skb
= skb_dequeue(&local
->pending
[i
])) != NULL
)
2986 ieee80211_free_txskb(&local
->hw
, skb
);
2991 * Returns false if the frame couldn't be transmitted but was queued instead,
2992 * which in this case means re-queued -- take as an indication to stop sending
2993 * more pending frames.
2995 static bool ieee80211_tx_pending_skb(struct ieee80211_local
*local
,
2996 struct sk_buff
*skb
)
2998 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2999 struct ieee80211_sub_if_data
*sdata
;
3000 struct sta_info
*sta
;
3001 struct ieee80211_hdr
*hdr
;
3003 struct ieee80211_chanctx_conf
*chanctx_conf
;
3005 sdata
= vif_to_sdata(info
->control
.vif
);
3007 if (info
->flags
& IEEE80211_TX_INTFL_NEED_TXPROCESSING
) {
3008 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3009 if (unlikely(!chanctx_conf
)) {
3013 info
->band
= chanctx_conf
->def
.chan
->band
;
3014 result
= ieee80211_tx(sdata
, NULL
, skb
, true);
3016 struct sk_buff_head skbs
;
3018 __skb_queue_head_init(&skbs
);
3019 __skb_queue_tail(&skbs
, skb
);
3021 hdr
= (struct ieee80211_hdr
*)skb
->data
;
3022 sta
= sta_info_get(sdata
, hdr
->addr1
);
3024 result
= __ieee80211_tx(local
, &skbs
, skb
->len
, sta
, true);
3031 * Transmit all pending packets. Called from tasklet.
3033 void ieee80211_tx_pending(unsigned long data
)
3035 struct ieee80211_local
*local
= (struct ieee80211_local
*)data
;
3036 unsigned long flags
;
3042 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
3043 for (i
= 0; i
< local
->hw
.queues
; i
++) {
3045 * If queue is stopped by something other than due to pending
3046 * frames, or we have no pending frames, proceed to next queue.
3048 if (local
->queue_stop_reasons
[i
] ||
3049 skb_queue_empty(&local
->pending
[i
]))
3052 while (!skb_queue_empty(&local
->pending
[i
])) {
3053 struct sk_buff
*skb
= __skb_dequeue(&local
->pending
[i
]);
3054 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
3056 if (WARN_ON(!info
->control
.vif
)) {
3057 ieee80211_free_txskb(&local
->hw
, skb
);
3061 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
3064 txok
= ieee80211_tx_pending_skb(local
, skb
);
3065 spin_lock_irqsave(&local
->queue_stop_reason_lock
,
3071 if (skb_queue_empty(&local
->pending
[i
]))
3072 ieee80211_propagate_queue_wake(local
, i
);
3074 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
3079 /* functions for drivers to get certain frames */
3081 static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data
*sdata
,
3082 struct ps_data
*ps
, struct sk_buff
*skb
,
3087 int i
, have_bits
= 0, n1
, n2
;
3089 /* Generate bitmap for TIM only if there are any STAs in power save
3091 if (atomic_read(&ps
->num_sta_ps
) > 0)
3092 /* in the hope that this is faster than
3093 * checking byte-for-byte */
3094 have_bits
= !bitmap_empty((unsigned long *)ps
->tim
,
3095 IEEE80211_MAX_AID
+1);
3097 if (ps
->dtim_count
== 0)
3098 ps
->dtim_count
= sdata
->vif
.bss_conf
.dtim_period
- 1;
3103 tim
= pos
= (u8
*) skb_put(skb
, 6);
3104 *pos
++ = WLAN_EID_TIM
;
3106 *pos
++ = ps
->dtim_count
;
3107 *pos
++ = sdata
->vif
.bss_conf
.dtim_period
;
3109 if (ps
->dtim_count
== 0 && !skb_queue_empty(&ps
->bc_buf
))
3112 ps
->dtim_bc_mc
= aid0
== 1;
3115 /* Find largest even number N1 so that bits numbered 1 through
3116 * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits
3117 * (N2 + 1) x 8 through 2007 are 0. */
3119 for (i
= 0; i
< IEEE80211_MAX_TIM_LEN
; i
++) {
3126 for (i
= IEEE80211_MAX_TIM_LEN
- 1; i
>= n1
; i
--) {
3133 /* Bitmap control */
3135 /* Part Virt Bitmap */
3136 skb_put(skb
, n2
- n1
);
3137 memcpy(pos
, ps
->tim
+ n1
, n2
- n1
+ 1);
3139 tim
[1] = n2
- n1
+ 4;
3141 *pos
++ = aid0
; /* Bitmap control */
3142 *pos
++ = 0; /* Part Virt Bitmap */
3146 static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data
*sdata
,
3147 struct ps_data
*ps
, struct sk_buff
*skb
,
3150 struct ieee80211_local
*local
= sdata
->local
;
3153 * Not very nice, but we want to allow the driver to call
3154 * ieee80211_beacon_get() as a response to the set_tim()
3155 * callback. That, however, is already invoked under the
3156 * sta_lock to guarantee consistent and race-free update
3157 * of the tim bitmap in mac80211 and the driver.
3159 if (local
->tim_in_locked_section
) {
3160 __ieee80211_beacon_add_tim(sdata
, ps
, skb
, is_template
);
3162 spin_lock_bh(&local
->tim_lock
);
3163 __ieee80211_beacon_add_tim(sdata
, ps
, skb
, is_template
);
3164 spin_unlock_bh(&local
->tim_lock
);
3170 static void ieee80211_set_csa(struct ieee80211_sub_if_data
*sdata
,
3171 struct beacon_data
*beacon
)
3173 struct probe_resp
*resp
;
3175 size_t beacon_data_len
;
3177 u8 count
= beacon
->csa_current_counter
;
3179 switch (sdata
->vif
.type
) {
3180 case NL80211_IFTYPE_AP
:
3181 beacon_data
= beacon
->tail
;
3182 beacon_data_len
= beacon
->tail_len
;
3184 case NL80211_IFTYPE_ADHOC
:
3185 beacon_data
= beacon
->head
;
3186 beacon_data_len
= beacon
->head_len
;
3188 case NL80211_IFTYPE_MESH_POINT
:
3189 beacon_data
= beacon
->head
;
3190 beacon_data_len
= beacon
->head_len
;
3197 for (i
= 0; i
< IEEE80211_MAX_CSA_COUNTERS_NUM
; ++i
) {
3198 resp
= rcu_dereference(sdata
->u
.ap
.probe_resp
);
3200 if (beacon
->csa_counter_offsets
[i
]) {
3201 if (WARN_ON_ONCE(beacon
->csa_counter_offsets
[i
] >=
3207 beacon_data
[beacon
->csa_counter_offsets
[i
]] = count
;
3210 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
&& resp
)
3211 resp
->data
[resp
->csa_counter_offsets
[i
]] = count
;
3216 u8
ieee80211_csa_update_counter(struct ieee80211_vif
*vif
)
3218 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3219 struct beacon_data
*beacon
= NULL
;
3224 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
3225 beacon
= rcu_dereference(sdata
->u
.ap
.beacon
);
3226 else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
3227 beacon
= rcu_dereference(sdata
->u
.ibss
.presp
);
3228 else if (ieee80211_vif_is_mesh(&sdata
->vif
))
3229 beacon
= rcu_dereference(sdata
->u
.mesh
.beacon
);
3234 beacon
->csa_current_counter
--;
3236 /* the counter should never reach 0 */
3237 WARN_ON_ONCE(!beacon
->csa_current_counter
);
3238 count
= beacon
->csa_current_counter
;
3244 EXPORT_SYMBOL(ieee80211_csa_update_counter
);
3246 bool ieee80211_csa_is_complete(struct ieee80211_vif
*vif
)
3248 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3249 struct beacon_data
*beacon
= NULL
;
3251 size_t beacon_data_len
;
3254 if (!ieee80211_sdata_running(sdata
))
3258 if (vif
->type
== NL80211_IFTYPE_AP
) {
3259 struct ieee80211_if_ap
*ap
= &sdata
->u
.ap
;
3261 beacon
= rcu_dereference(ap
->beacon
);
3262 if (WARN_ON(!beacon
|| !beacon
->tail
))
3264 beacon_data
= beacon
->tail
;
3265 beacon_data_len
= beacon
->tail_len
;
3266 } else if (vif
->type
== NL80211_IFTYPE_ADHOC
) {
3267 struct ieee80211_if_ibss
*ifibss
= &sdata
->u
.ibss
;
3269 beacon
= rcu_dereference(ifibss
->presp
);
3273 beacon_data
= beacon
->head
;
3274 beacon_data_len
= beacon
->head_len
;
3275 } else if (vif
->type
== NL80211_IFTYPE_MESH_POINT
) {
3276 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
3278 beacon
= rcu_dereference(ifmsh
->beacon
);
3282 beacon_data
= beacon
->head
;
3283 beacon_data_len
= beacon
->head_len
;
3289 if (!beacon
->csa_counter_offsets
[0])
3292 if (WARN_ON_ONCE(beacon
->csa_counter_offsets
[0] > beacon_data_len
))
3295 if (beacon_data
[beacon
->csa_counter_offsets
[0]] == 1)
3302 EXPORT_SYMBOL(ieee80211_csa_is_complete
);
3304 static struct sk_buff
*
3305 __ieee80211_beacon_get(struct ieee80211_hw
*hw
,
3306 struct ieee80211_vif
*vif
,
3307 struct ieee80211_mutable_offsets
*offs
,
3310 struct ieee80211_local
*local
= hw_to_local(hw
);
3311 struct beacon_data
*beacon
= NULL
;
3312 struct sk_buff
*skb
= NULL
;
3313 struct ieee80211_tx_info
*info
;
3314 struct ieee80211_sub_if_data
*sdata
= NULL
;
3315 enum ieee80211_band band
;
3316 struct ieee80211_tx_rate_control txrc
;
3317 struct ieee80211_chanctx_conf
*chanctx_conf
;
3318 int csa_off_base
= 0;
3322 sdata
= vif_to_sdata(vif
);
3323 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3325 if (!ieee80211_sdata_running(sdata
) || !chanctx_conf
)
3329 memset(offs
, 0, sizeof(*offs
));
3331 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
3332 struct ieee80211_if_ap
*ap
= &sdata
->u
.ap
;
3334 beacon
= rcu_dereference(ap
->beacon
);
3336 if (beacon
->csa_counter_offsets
[0]) {
3338 ieee80211_csa_update_counter(vif
);
3340 ieee80211_set_csa(sdata
, beacon
);
3344 * headroom, head length,
3345 * tail length and maximum TIM length
3347 skb
= dev_alloc_skb(local
->tx_headroom
+
3349 beacon
->tail_len
+ 256 +
3350 local
->hw
.extra_beacon_tailroom
);
3354 skb_reserve(skb
, local
->tx_headroom
);
3355 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3358 ieee80211_beacon_add_tim(sdata
, &ap
->ps
, skb
,
3362 offs
->tim_offset
= beacon
->head_len
;
3363 offs
->tim_length
= skb
->len
- beacon
->head_len
;
3365 /* for AP the csa offsets are from tail */
3366 csa_off_base
= skb
->len
;
3370 memcpy(skb_put(skb
, beacon
->tail_len
),
3371 beacon
->tail
, beacon
->tail_len
);
3374 } else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
3375 struct ieee80211_if_ibss
*ifibss
= &sdata
->u
.ibss
;
3376 struct ieee80211_hdr
*hdr
;
3378 beacon
= rcu_dereference(ifibss
->presp
);
3382 if (beacon
->csa_counter_offsets
[0]) {
3384 ieee80211_csa_update_counter(vif
);
3386 ieee80211_set_csa(sdata
, beacon
);
3389 skb
= dev_alloc_skb(local
->tx_headroom
+ beacon
->head_len
+
3390 local
->hw
.extra_beacon_tailroom
);
3393 skb_reserve(skb
, local
->tx_headroom
);
3394 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3397 hdr
= (struct ieee80211_hdr
*) skb
->data
;
3398 hdr
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
3399 IEEE80211_STYPE_BEACON
);
3400 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
3401 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
3403 beacon
= rcu_dereference(ifmsh
->beacon
);
3407 if (beacon
->csa_counter_offsets
[0]) {
3409 /* TODO: For mesh csa_counter is in TU, so
3410 * decrementing it by one isn't correct, but
3411 * for now we leave it consistent with overall
3412 * mac80211's behavior.
3414 ieee80211_csa_update_counter(vif
);
3416 ieee80211_set_csa(sdata
, beacon
);
3419 if (ifmsh
->sync_ops
)
3420 ifmsh
->sync_ops
->adjust_tbtt(sdata
, beacon
);
3422 skb
= dev_alloc_skb(local
->tx_headroom
+
3426 local
->hw
.extra_beacon_tailroom
);
3429 skb_reserve(skb
, local
->tx_headroom
);
3430 memcpy(skb_put(skb
, beacon
->head_len
), beacon
->head
,
3432 ieee80211_beacon_add_tim(sdata
, &ifmsh
->ps
, skb
, is_template
);
3435 offs
->tim_offset
= beacon
->head_len
;
3436 offs
->tim_length
= skb
->len
- beacon
->head_len
;
3439 memcpy(skb_put(skb
, beacon
->tail_len
), beacon
->tail
,
3447 if (offs
&& beacon
) {
3450 for (i
= 0; i
< IEEE80211_MAX_CSA_COUNTERS_NUM
; i
++) {
3451 u16 csa_off
= beacon
->csa_counter_offsets
[i
];
3456 offs
->csa_counter_offs
[i
] = csa_off_base
+ csa_off
;
3460 band
= chanctx_conf
->def
.chan
->band
;
3462 info
= IEEE80211_SKB_CB(skb
);
3464 info
->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
3465 info
->flags
|= IEEE80211_TX_CTL_NO_ACK
;
3468 memset(&txrc
, 0, sizeof(txrc
));
3470 txrc
.sband
= local
->hw
.wiphy
->bands
[band
];
3471 txrc
.bss_conf
= &sdata
->vif
.bss_conf
;
3473 txrc
.reported_rate
.idx
= -1;
3474 txrc
.rate_idx_mask
= sdata
->rc_rateidx_mask
[band
];
3475 if (txrc
.rate_idx_mask
== (1 << txrc
.sband
->n_bitrates
) - 1)
3476 txrc
.max_rate_idx
= -1;
3478 txrc
.max_rate_idx
= fls(txrc
.rate_idx_mask
) - 1;
3480 rate_control_get_rate(sdata
, NULL
, &txrc
);
3482 info
->control
.vif
= vif
;
3484 info
->flags
|= IEEE80211_TX_CTL_CLEAR_PS_FILT
|
3485 IEEE80211_TX_CTL_ASSIGN_SEQ
|
3486 IEEE80211_TX_CTL_FIRST_FRAGMENT
;
3494 ieee80211_beacon_get_template(struct ieee80211_hw
*hw
,
3495 struct ieee80211_vif
*vif
,
3496 struct ieee80211_mutable_offsets
*offs
)
3498 return __ieee80211_beacon_get(hw
, vif
, offs
, true);
3500 EXPORT_SYMBOL(ieee80211_beacon_get_template
);
3502 struct sk_buff
*ieee80211_beacon_get_tim(struct ieee80211_hw
*hw
,
3503 struct ieee80211_vif
*vif
,
3504 u16
*tim_offset
, u16
*tim_length
)
3506 struct ieee80211_mutable_offsets offs
= {};
3507 struct sk_buff
*bcn
= __ieee80211_beacon_get(hw
, vif
, &offs
, false);
3510 *tim_offset
= offs
.tim_offset
;
3513 *tim_length
= offs
.tim_length
;
3517 EXPORT_SYMBOL(ieee80211_beacon_get_tim
);
3519 struct sk_buff
*ieee80211_proberesp_get(struct ieee80211_hw
*hw
,
3520 struct ieee80211_vif
*vif
)
3522 struct ieee80211_if_ap
*ap
= NULL
;
3523 struct sk_buff
*skb
= NULL
;
3524 struct probe_resp
*presp
= NULL
;
3525 struct ieee80211_hdr
*hdr
;
3526 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
3528 if (sdata
->vif
.type
!= NL80211_IFTYPE_AP
)
3534 presp
= rcu_dereference(ap
->probe_resp
);
3538 skb
= dev_alloc_skb(presp
->len
);
3542 memcpy(skb_put(skb
, presp
->len
), presp
->data
, presp
->len
);
3544 hdr
= (struct ieee80211_hdr
*) skb
->data
;
3545 memset(hdr
->addr1
, 0, sizeof(hdr
->addr1
));
3551 EXPORT_SYMBOL(ieee80211_proberesp_get
);
3553 struct sk_buff
*ieee80211_pspoll_get(struct ieee80211_hw
*hw
,
3554 struct ieee80211_vif
*vif
)
3556 struct ieee80211_sub_if_data
*sdata
;
3557 struct ieee80211_if_managed
*ifmgd
;
3558 struct ieee80211_pspoll
*pspoll
;
3559 struct ieee80211_local
*local
;
3560 struct sk_buff
*skb
;
3562 if (WARN_ON(vif
->type
!= NL80211_IFTYPE_STATION
))
3565 sdata
= vif_to_sdata(vif
);
3566 ifmgd
= &sdata
->u
.mgd
;
3567 local
= sdata
->local
;
3569 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*pspoll
));
3573 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3575 pspoll
= (struct ieee80211_pspoll
*) skb_put(skb
, sizeof(*pspoll
));
3576 memset(pspoll
, 0, sizeof(*pspoll
));
3577 pspoll
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_CTL
|
3578 IEEE80211_STYPE_PSPOLL
);
3579 pspoll
->aid
= cpu_to_le16(ifmgd
->aid
);
3581 /* aid in PS-Poll has its two MSBs each set to 1 */
3582 pspoll
->aid
|= cpu_to_le16(1 << 15 | 1 << 14);
3584 memcpy(pspoll
->bssid
, ifmgd
->bssid
, ETH_ALEN
);
3585 memcpy(pspoll
->ta
, vif
->addr
, ETH_ALEN
);
3589 EXPORT_SYMBOL(ieee80211_pspoll_get
);
3591 struct sk_buff
*ieee80211_nullfunc_get(struct ieee80211_hw
*hw
,
3592 struct ieee80211_vif
*vif
)
3594 struct ieee80211_hdr_3addr
*nullfunc
;
3595 struct ieee80211_sub_if_data
*sdata
;
3596 struct ieee80211_if_managed
*ifmgd
;
3597 struct ieee80211_local
*local
;
3598 struct sk_buff
*skb
;
3600 if (WARN_ON(vif
->type
!= NL80211_IFTYPE_STATION
))
3603 sdata
= vif_to_sdata(vif
);
3604 ifmgd
= &sdata
->u
.mgd
;
3605 local
= sdata
->local
;
3607 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*nullfunc
));
3611 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3613 nullfunc
= (struct ieee80211_hdr_3addr
*) skb_put(skb
,
3615 memset(nullfunc
, 0, sizeof(*nullfunc
));
3616 nullfunc
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_DATA
|
3617 IEEE80211_STYPE_NULLFUNC
|
3618 IEEE80211_FCTL_TODS
);
3619 memcpy(nullfunc
->addr1
, ifmgd
->bssid
, ETH_ALEN
);
3620 memcpy(nullfunc
->addr2
, vif
->addr
, ETH_ALEN
);
3621 memcpy(nullfunc
->addr3
, ifmgd
->bssid
, ETH_ALEN
);
3625 EXPORT_SYMBOL(ieee80211_nullfunc_get
);
3627 struct sk_buff
*ieee80211_probereq_get(struct ieee80211_hw
*hw
,
3629 const u8
*ssid
, size_t ssid_len
,
3632 struct ieee80211_local
*local
= hw_to_local(hw
);
3633 struct ieee80211_hdr_3addr
*hdr
;
3634 struct sk_buff
*skb
;
3638 ie_ssid_len
= 2 + ssid_len
;
3640 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*hdr
) +
3641 ie_ssid_len
+ tailroom
);
3645 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
3647 hdr
= (struct ieee80211_hdr_3addr
*) skb_put(skb
, sizeof(*hdr
));
3648 memset(hdr
, 0, sizeof(*hdr
));
3649 hdr
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
3650 IEEE80211_STYPE_PROBE_REQ
);
3651 eth_broadcast_addr(hdr
->addr1
);
3652 memcpy(hdr
->addr2
, src_addr
, ETH_ALEN
);
3653 eth_broadcast_addr(hdr
->addr3
);
3655 pos
= skb_put(skb
, ie_ssid_len
);
3656 *pos
++ = WLAN_EID_SSID
;
3659 memcpy(pos
, ssid
, ssid_len
);
3664 EXPORT_SYMBOL(ieee80211_probereq_get
);
3666 void ieee80211_rts_get(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
3667 const void *frame
, size_t frame_len
,
3668 const struct ieee80211_tx_info
*frame_txctl
,
3669 struct ieee80211_rts
*rts
)
3671 const struct ieee80211_hdr
*hdr
= frame
;
3673 rts
->frame_control
=
3674 cpu_to_le16(IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_RTS
);
3675 rts
->duration
= ieee80211_rts_duration(hw
, vif
, frame_len
,
3677 memcpy(rts
->ra
, hdr
->addr1
, sizeof(rts
->ra
));
3678 memcpy(rts
->ta
, hdr
->addr2
, sizeof(rts
->ta
));
3680 EXPORT_SYMBOL(ieee80211_rts_get
);
3682 void ieee80211_ctstoself_get(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
3683 const void *frame
, size_t frame_len
,
3684 const struct ieee80211_tx_info
*frame_txctl
,
3685 struct ieee80211_cts
*cts
)
3687 const struct ieee80211_hdr
*hdr
= frame
;
3689 cts
->frame_control
=
3690 cpu_to_le16(IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_CTS
);
3691 cts
->duration
= ieee80211_ctstoself_duration(hw
, vif
,
3692 frame_len
, frame_txctl
);
3693 memcpy(cts
->ra
, hdr
->addr1
, sizeof(cts
->ra
));
3695 EXPORT_SYMBOL(ieee80211_ctstoself_get
);
3698 ieee80211_get_buffered_bc(struct ieee80211_hw
*hw
,
3699 struct ieee80211_vif
*vif
)
3701 struct ieee80211_local
*local
= hw_to_local(hw
);
3702 struct sk_buff
*skb
= NULL
;
3703 struct ieee80211_tx_data tx
;
3704 struct ieee80211_sub_if_data
*sdata
;
3706 struct ieee80211_tx_info
*info
;
3707 struct ieee80211_chanctx_conf
*chanctx_conf
;
3709 sdata
= vif_to_sdata(vif
);
3712 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3717 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
3718 struct beacon_data
*beacon
=
3719 rcu_dereference(sdata
->u
.ap
.beacon
);
3721 if (!beacon
|| !beacon
->head
)
3724 ps
= &sdata
->u
.ap
.ps
;
3725 } else if (ieee80211_vif_is_mesh(&sdata
->vif
)) {
3726 ps
= &sdata
->u
.mesh
.ps
;
3731 if (ps
->dtim_count
!= 0 || !ps
->dtim_bc_mc
)
3732 goto out
; /* send buffered bc/mc only after DTIM beacon */
3735 skb
= skb_dequeue(&ps
->bc_buf
);
3738 local
->total_ps_buffered
--;
3740 if (!skb_queue_empty(&ps
->bc_buf
) && skb
->len
>= 2) {
3741 struct ieee80211_hdr
*hdr
=
3742 (struct ieee80211_hdr
*) skb
->data
;
3743 /* more buffered multicast/broadcast frames ==> set
3744 * MoreData flag in IEEE 802.11 header to inform PS
3746 hdr
->frame_control
|=
3747 cpu_to_le16(IEEE80211_FCTL_MOREDATA
);
3750 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
)
3751 sdata
= IEEE80211_DEV_TO_SUB_IF(skb
->dev
);
3752 if (!ieee80211_tx_prepare(sdata
, &tx
, NULL
, skb
))
3754 dev_kfree_skb_any(skb
);
3757 info
= IEEE80211_SKB_CB(skb
);
3759 tx
.flags
|= IEEE80211_TX_PS_BUFFERED
;
3760 info
->band
= chanctx_conf
->def
.chan
->band
;
3762 if (invoke_tx_handlers(&tx
))
3769 EXPORT_SYMBOL(ieee80211_get_buffered_bc
);
3771 int ieee80211_reserve_tid(struct ieee80211_sta
*pubsta
, u8 tid
)
3773 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
3774 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
3775 struct ieee80211_local
*local
= sdata
->local
;
3779 lockdep_assert_held(&local
->sta_mtx
);
3781 /* only some cases are supported right now */
3782 switch (sdata
->vif
.type
) {
3783 case NL80211_IFTYPE_STATION
:
3784 case NL80211_IFTYPE_AP
:
3785 case NL80211_IFTYPE_AP_VLAN
:
3792 if (WARN_ON(tid
>= IEEE80211_NUM_UPS
))
3795 if (sta
->reserved_tid
== tid
) {
3800 if (sta
->reserved_tid
!= IEEE80211_TID_UNRESERVED
) {
3801 sdata_err(sdata
, "TID reservation already active\n");
3806 ieee80211_stop_vif_queues(sdata
->local
, sdata
,
3807 IEEE80211_QUEUE_STOP_REASON_RESERVE_TID
);
3811 /* Tear down BA sessions so we stop aggregating on this TID */
3812 if (ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
)) {
3813 set_sta_flag(sta
, WLAN_STA_BLOCK_BA
);
3814 __ieee80211_stop_tx_ba_session(sta
, tid
,
3815 AGG_STOP_LOCAL_REQUEST
);
3818 queues
= BIT(sdata
->vif
.hw_queue
[ieee802_1d_to_ac
[tid
]]);
3819 __ieee80211_flush_queues(local
, sdata
, queues
, false);
3821 sta
->reserved_tid
= tid
;
3823 ieee80211_wake_vif_queues(local
, sdata
,
3824 IEEE80211_QUEUE_STOP_REASON_RESERVE_TID
);
3826 if (ieee80211_hw_check(&local
->hw
, AMPDU_AGGREGATION
))
3827 clear_sta_flag(sta
, WLAN_STA_BLOCK_BA
);
3833 EXPORT_SYMBOL(ieee80211_reserve_tid
);
3835 void ieee80211_unreserve_tid(struct ieee80211_sta
*pubsta
, u8 tid
)
3837 struct sta_info
*sta
= container_of(pubsta
, struct sta_info
, sta
);
3838 struct ieee80211_sub_if_data
*sdata
= sta
->sdata
;
3840 lockdep_assert_held(&sdata
->local
->sta_mtx
);
3842 /* only some cases are supported right now */
3843 switch (sdata
->vif
.type
) {
3844 case NL80211_IFTYPE_STATION
:
3845 case NL80211_IFTYPE_AP
:
3846 case NL80211_IFTYPE_AP_VLAN
:
3853 if (tid
!= sta
->reserved_tid
) {
3854 sdata_err(sdata
, "TID to unreserve (%d) isn't reserved\n", tid
);
3858 sta
->reserved_tid
= IEEE80211_TID_UNRESERVED
;
3860 EXPORT_SYMBOL(ieee80211_unreserve_tid
);
3862 void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data
*sdata
,
3863 struct sk_buff
*skb
, int tid
,
3864 enum ieee80211_band band
)
3866 int ac
= ieee802_1d_to_ac
[tid
& 7];
3868 skb_set_mac_header(skb
, 0);
3869 skb_set_network_header(skb
, 0);
3870 skb_set_transport_header(skb
, 0);
3872 skb_set_queue_mapping(skb
, ac
);
3873 skb
->priority
= tid
;
3875 skb
->dev
= sdata
->dev
;
3878 * The other path calling ieee80211_xmit is from the tasklet,
3879 * and while we can handle concurrent transmissions locking
3880 * requirements are that we do not come into tx with bhs on.
3883 IEEE80211_SKB_CB(skb
)->band
= band
;
3884 ieee80211_xmit(sdata
, NULL
, skb
);