1 /* SPDX-License-Identifier: GPL-2.0 */
3 * MPC8xx Communication Processor Module.
4 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
6 * This file contains structures and information for the communication
7 * processor channels. Some CPM control and status is available
8 * through the MPC8xx internal memory map. See immap.h for details.
9 * This file only contains what I need for the moment, not the total
10 * CPM capabilities. I (or someone else) will add definitions as they
13 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
14 * bytes of the DP RAM and relocates the I2C parameter area to the
15 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
21 #include <linux/init.h>
22 #include <asm/8xx_immap.h>
23 #include <asm/ptrace.h>
26 /* CPM Command register.
28 #define CPM_CR_RST ((ushort)0x8000)
29 #define CPM_CR_OPCODE ((ushort)0x0f00)
30 #define CPM_CR_CHAN ((ushort)0x00f0)
31 #define CPM_CR_FLG ((ushort)0x0001)
35 #define CPM_CR_CH_SCC1 ((ushort)0x0000)
36 #define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
37 #define CPM_CR_CH_SCC2 ((ushort)0x0004)
38 #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
39 #define CPM_CR_CH_TIMER CPM_CR_CH_SPI
40 #define CPM_CR_CH_SCC3 ((ushort)0x0008)
41 #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
42 #define CPM_CR_CH_SCC4 ((ushort)0x000c)
43 #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
45 #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
47 /* Export the base address of the communication processor registers
50 extern cpm8xx_t __iomem
*cpmp
; /* Pointer to comm processor */
52 #define cpm_dpalloc cpm_muram_alloc
53 #define cpm_dpfree cpm_muram_free
54 #define cpm_dpram_addr cpm_muram_addr
55 #define cpm_dpram_phys cpm_muram_dma
57 extern void cpm_setbrg(uint brg
, uint rate
);
59 extern void __init
cpm_load_patch(cpm8xx_t
*cp
);
61 extern void cpm_reset(void);
63 /* Parameter RAM offsets.
65 #define PROFF_SCC1 ((uint)0x0000)
66 #define PROFF_IIC ((uint)0x0080)
67 #define PROFF_SCC2 ((uint)0x0100)
68 #define PROFF_SPI ((uint)0x0180)
69 #define PROFF_SCC3 ((uint)0x0200)
70 #define PROFF_SMC1 ((uint)0x0280)
71 #define PROFF_SCC4 ((uint)0x0300)
72 #define PROFF_SMC2 ((uint)0x0380)
74 /* Define enough so I can at least use the serial port as a UART.
75 * The MBX uses SMC1 as the host serial port.
77 typedef struct smc_uart
{
78 ushort smc_rbase
; /* Rx Buffer descriptor base address */
79 ushort smc_tbase
; /* Tx Buffer descriptor base address */
80 u_char smc_rfcr
; /* Rx function code */
81 u_char smc_tfcr
; /* Tx function code */
82 ushort smc_mrblr
; /* Max receive buffer length */
83 uint smc_rstate
; /* Internal */
84 uint smc_idp
; /* Internal */
85 ushort smc_rbptr
; /* Internal */
86 ushort smc_ibc
; /* Internal */
87 uint smc_rxtmp
; /* Internal */
88 uint smc_tstate
; /* Internal */
89 uint smc_tdp
; /* Internal */
90 ushort smc_tbptr
; /* Internal */
91 ushort smc_tbc
; /* Internal */
92 uint smc_txtmp
; /* Internal */
93 ushort smc_maxidl
; /* Maximum idle characters */
94 ushort smc_tmpidl
; /* Temporary idle counter */
95 ushort smc_brklen
; /* Last received break length */
96 ushort smc_brkec
; /* rcv'd break condition counter */
97 ushort smc_brkcr
; /* xmt break count register */
98 ushort smc_rmask
; /* Temporary bit mask */
99 char res1
[8]; /* Reserved */
100 ushort smc_rpbase
; /* Relocation pointer */
103 /* Function code bits.
105 #define SMC_EB ((u_char)0x10) /* Set big endian byte order */
107 /* SMC uart mode register.
109 #define SMCMR_REN ((ushort)0x0001)
110 #define SMCMR_TEN ((ushort)0x0002)
111 #define SMCMR_DM ((ushort)0x000c)
112 #define SMCMR_SM_GCI ((ushort)0x0000)
113 #define SMCMR_SM_UART ((ushort)0x0020)
114 #define SMCMR_SM_TRANS ((ushort)0x0030)
115 #define SMCMR_SM_MASK ((ushort)0x0030)
116 #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
117 #define SMCMR_REVD SMCMR_PM_EVEN
118 #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
119 #define SMCMR_BS SMCMR_PEN
120 #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
121 #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
122 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
124 /* SMC2 as Centronics parallel printer. It is half duplex, in that
125 * it can only receive or transmit. The parameter ram values for
126 * each direction are either unique or properly overlap, so we can
127 * include them in one structure.
129 typedef struct smc_centronics
{
147 ushort scent_character1
;
148 ushort scent_character2
;
149 ushort scent_character3
;
150 ushort scent_character4
;
151 ushort scent_character5
;
152 ushort scent_character6
;
153 ushort scent_character7
;
154 ushort scent_character8
;
159 /* Centronics Status Mask Register.
161 #define SMC_CENT_F ((u_char)0x08)
162 #define SMC_CENT_PE ((u_char)0x04)
163 #define SMC_CENT_S ((u_char)0x02)
165 /* SMC Event and Mask register.
167 #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
168 #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
169 #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
170 #define SMCM_BSY ((unsigned char)0x04)
171 #define SMCM_TX ((unsigned char)0x02)
172 #define SMCM_RX ((unsigned char)0x01)
174 /* Baud rate generators.
176 #define CPM_BRG_RST ((uint)0x00020000)
177 #define CPM_BRG_EN ((uint)0x00010000)
178 #define CPM_BRG_EXTC_INT ((uint)0x00000000)
179 #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
180 #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
181 #define CPM_BRG_ATB ((uint)0x00002000)
182 #define CPM_BRG_CD_MASK ((uint)0x00001ffe)
183 #define CPM_BRG_DIV16 ((uint)0x00000001)
185 /* SI Clock Route Register
187 #define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
188 #define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
189 #define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
190 #define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
191 #define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
192 #define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
193 #define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
194 #define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
198 #define SCC_GSMRH_IRP ((uint)0x00040000)
199 #define SCC_GSMRH_GDE ((uint)0x00010000)
200 #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
201 #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
202 #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
203 #define SCC_GSMRH_REVD ((uint)0x00002000)
204 #define SCC_GSMRH_TRX ((uint)0x00001000)
205 #define SCC_GSMRH_TTX ((uint)0x00000800)
206 #define SCC_GSMRH_CDP ((uint)0x00000400)
207 #define SCC_GSMRH_CTSP ((uint)0x00000200)
208 #define SCC_GSMRH_CDS ((uint)0x00000100)
209 #define SCC_GSMRH_CTSS ((uint)0x00000080)
210 #define SCC_GSMRH_TFL ((uint)0x00000040)
211 #define SCC_GSMRH_RFW ((uint)0x00000020)
212 #define SCC_GSMRH_TXSY ((uint)0x00000010)
213 #define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
214 #define SCC_GSMRH_SYNL8 ((uint)0x00000008)
215 #define SCC_GSMRH_SYNL4 ((uint)0x00000004)
216 #define SCC_GSMRH_RTSM ((uint)0x00000002)
217 #define SCC_GSMRH_RSYN ((uint)0x00000001)
219 #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
220 #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
221 #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
222 #define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
223 #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
224 #define SCC_GSMRL_TCI ((uint)0x10000000)
225 #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
226 #define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
227 #define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
228 #define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
229 #define SCC_GSMRL_RINV ((uint)0x02000000)
230 #define SCC_GSMRL_TINV ((uint)0x01000000)
231 #define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
232 #define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
233 #define SCC_GSMRL_TPL_48 ((uint)0x00800000)
234 #define SCC_GSMRL_TPL_32 ((uint)0x00600000)
235 #define SCC_GSMRL_TPL_16 ((uint)0x00400000)
236 #define SCC_GSMRL_TPL_8 ((uint)0x00200000)
237 #define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
238 #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
239 #define SCC_GSMRL_TPP_01 ((uint)0x00100000)
240 #define SCC_GSMRL_TPP_10 ((uint)0x00080000)
241 #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
242 #define SCC_GSMRL_TEND ((uint)0x00040000)
243 #define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
244 #define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
245 #define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
246 #define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
247 #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
248 #define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
249 #define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
250 #define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
251 #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
252 #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
253 #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
254 #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
255 #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
256 #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
257 #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
258 #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
259 #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
260 #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
261 #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
262 #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
263 #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
264 #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
265 #define SCC_GSMRL_ENR ((uint)0x00000020)
266 #define SCC_GSMRL_ENT ((uint)0x00000010)
267 #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
268 #define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
269 #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
270 #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
271 #define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
272 #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
273 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
274 #define SCC_GSMRL_MODE_UART ((uint)0x00000004)
275 #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
276 #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
277 #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
279 #define SCC_TODR_TOD ((ushort)0x8000)
281 /* SCC Event and Mask register.
283 #define SCCM_TXE ((unsigned char)0x10)
284 #define SCCM_BSY ((unsigned char)0x04)
285 #define SCCM_TX ((unsigned char)0x02)
286 #define SCCM_RX ((unsigned char)0x01)
288 typedef struct scc_param
{
289 ushort scc_rbase
; /* Rx Buffer descriptor base address */
290 ushort scc_tbase
; /* Tx Buffer descriptor base address */
291 u_char scc_rfcr
; /* Rx function code */
292 u_char scc_tfcr
; /* Tx function code */
293 ushort scc_mrblr
; /* Max receive buffer length */
294 uint scc_rstate
; /* Internal */
295 uint scc_idp
; /* Internal */
296 ushort scc_rbptr
; /* Internal */
297 ushort scc_ibc
; /* Internal */
298 uint scc_rxtmp
; /* Internal */
299 uint scc_tstate
; /* Internal */
300 uint scc_tdp
; /* Internal */
301 ushort scc_tbptr
; /* Internal */
302 ushort scc_tbc
; /* Internal */
303 uint scc_txtmp
; /* Internal */
304 uint scc_rcrc
; /* Internal */
305 uint scc_tcrc
; /* Internal */
308 /* Function code bits.
310 #define SCC_EB ((u_char)0x10) /* Set big endian byte order */
312 /* CPM Ethernet through SCCx.
314 typedef struct scc_enet
{
316 uint sen_cpres
; /* Preset CRC */
317 uint sen_cmask
; /* Constant mask for CRC */
318 uint sen_crcec
; /* CRC Error counter */
319 uint sen_alec
; /* alignment error counter */
320 uint sen_disfc
; /* discard frame counter */
321 ushort sen_pads
; /* Tx short frame pad character */
322 ushort sen_retlim
; /* Retry limit threshold */
323 ushort sen_retcnt
; /* Retry limit counter */
324 ushort sen_maxflr
; /* maximum frame length register */
325 ushort sen_minflr
; /* minimum frame length register */
326 ushort sen_maxd1
; /* maximum DMA1 length */
327 ushort sen_maxd2
; /* maximum DMA2 length */
328 ushort sen_maxd
; /* Rx max DMA */
329 ushort sen_dmacnt
; /* Rx DMA counter */
330 ushort sen_maxb
; /* Max BD byte count */
331 ushort sen_gaddr1
; /* Group address filter */
335 uint sen_tbuf0data0
; /* Save area 0 - current frame */
336 uint sen_tbuf0data1
; /* Save area 1 - current frame */
337 uint sen_tbuf0rba
; /* Internal */
338 uint sen_tbuf0crc
; /* Internal */
339 ushort sen_tbuf0bcnt
; /* Internal */
340 ushort sen_paddrh
; /* physical address (MSB) */
342 ushort sen_paddrl
; /* physical address (LSB) */
343 ushort sen_pper
; /* persistence */
344 ushort sen_rfbdptr
; /* Rx first BD pointer */
345 ushort sen_tfbdptr
; /* Tx first BD pointer */
346 ushort sen_tlbdptr
; /* Tx last BD pointer */
347 uint sen_tbuf1data0
; /* Save area 0 - current frame */
348 uint sen_tbuf1data1
; /* Save area 1 - current frame */
349 uint sen_tbuf1rba
; /* Internal */
350 uint sen_tbuf1crc
; /* Internal */
351 ushort sen_tbuf1bcnt
; /* Internal */
352 ushort sen_txlen
; /* Tx Frame length counter */
353 ushort sen_iaddr1
; /* Individual address filter */
357 ushort sen_boffcnt
; /* Backoff counter */
359 /* NOTE: Some versions of the manual have the following items
360 * incorrectly documented. Below is the proper order.
362 ushort sen_taddrh
; /* temp address (MSB) */
364 ushort sen_taddrl
; /* temp address (LSB) */
367 /* SCC Event register as used by Ethernet.
369 #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
370 #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
371 #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
372 #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
373 #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
374 #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
376 /* SCC Mode Register (PMSR) as used by Ethernet.
378 #define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
379 #define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
380 #define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
381 #define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
382 #define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
383 #define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
384 #define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
385 #define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
386 #define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
387 #define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
388 #define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
389 #define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
390 #define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
394 typedef struct scc_uart
{
396 char res1
[8]; /* Reserved */
397 ushort scc_maxidl
; /* Maximum idle chars */
398 ushort scc_idlc
; /* temp idle counter */
399 ushort scc_brkcr
; /* Break count register */
400 ushort scc_parec
; /* receive parity error counter */
401 ushort scc_frmec
; /* receive framing error counter */
402 ushort scc_nosec
; /* receive noise counter */
403 ushort scc_brkec
; /* receive break condition counter */
404 ushort scc_brkln
; /* last received break length */
405 ushort scc_uaddr1
; /* UART address character 1 */
406 ushort scc_uaddr2
; /* UART address character 2 */
407 ushort scc_rtemp
; /* Temp storage */
408 ushort scc_toseq
; /* Transmit out of sequence char */
409 ushort scc_char1
; /* control character 1 */
410 ushort scc_char2
; /* control character 2 */
411 ushort scc_char3
; /* control character 3 */
412 ushort scc_char4
; /* control character 4 */
413 ushort scc_char5
; /* control character 5 */
414 ushort scc_char6
; /* control character 6 */
415 ushort scc_char7
; /* control character 7 */
416 ushort scc_char8
; /* control character 8 */
417 ushort scc_rccm
; /* receive control character mask */
418 ushort scc_rccr
; /* receive control character register */
419 ushort scc_rlbc
; /* receive last break character */
422 /* SCC Event and Mask registers when it is used as a UART.
424 #define UART_SCCM_GLR ((ushort)0x1000)
425 #define UART_SCCM_GLT ((ushort)0x0800)
426 #define UART_SCCM_AB ((ushort)0x0200)
427 #define UART_SCCM_IDL ((ushort)0x0100)
428 #define UART_SCCM_GRA ((ushort)0x0080)
429 #define UART_SCCM_BRKE ((ushort)0x0040)
430 #define UART_SCCM_BRKS ((ushort)0x0020)
431 #define UART_SCCM_CCR ((ushort)0x0008)
432 #define UART_SCCM_BSY ((ushort)0x0004)
433 #define UART_SCCM_TX ((ushort)0x0002)
434 #define UART_SCCM_RX ((ushort)0x0001)
436 /* The SCC PMSR when used as a UART.
438 #define SCU_PSMR_FLC ((ushort)0x8000)
439 #define SCU_PSMR_SL ((ushort)0x4000)
440 #define SCU_PSMR_CL ((ushort)0x3000)
441 #define SCU_PSMR_UM ((ushort)0x0c00)
442 #define SCU_PSMR_FRZ ((ushort)0x0200)
443 #define SCU_PSMR_RZS ((ushort)0x0100)
444 #define SCU_PSMR_SYN ((ushort)0x0080)
445 #define SCU_PSMR_DRT ((ushort)0x0040)
446 #define SCU_PSMR_PEN ((ushort)0x0010)
447 #define SCU_PSMR_RPM ((ushort)0x000c)
448 #define SCU_PSMR_REVP ((ushort)0x0008)
449 #define SCU_PSMR_TPM ((ushort)0x0003)
450 #define SCU_PSMR_TEVP ((ushort)0x0002)
452 /* CPM Transparent mode SCC.
454 typedef struct scc_trans
{
456 uint st_cpres
; /* Preset CRC */
457 uint st_cmask
; /* Constant mask for CRC */
460 /* IIC parameter RAM.
463 ushort iic_rbase
; /* Rx Buffer descriptor base address */
464 ushort iic_tbase
; /* Tx Buffer descriptor base address */
465 u_char iic_rfcr
; /* Rx function code */
466 u_char iic_tfcr
; /* Tx function code */
467 ushort iic_mrblr
; /* Max receive buffer length */
468 uint iic_rstate
; /* Internal */
469 uint iic_rdp
; /* Internal */
470 ushort iic_rbptr
; /* Internal */
471 ushort iic_rbc
; /* Internal */
472 uint iic_rxtmp
; /* Internal */
473 uint iic_tstate
; /* Internal */
474 uint iic_tdp
; /* Internal */
475 ushort iic_tbptr
; /* Internal */
476 ushort iic_tbc
; /* Internal */
477 uint iic_txtmp
; /* Internal */
478 char res1
[4]; /* Reserved */
479 ushort iic_rpbase
; /* Relocation pointer */
480 char res2
[2]; /* Reserved */
484 * RISC Controller Configuration Register definitons
486 #define RCCR_TIME 0x8000 /* RISC Timer Enable */
487 #define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
488 #define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
490 /* RISC Timer Parameter RAM offset */
491 #define PROFF_RTMR ((uint)0x01B0)
493 typedef struct risc_timer_pram
{
494 unsigned short tm_base
; /* RISC Timer Table Base Address */
495 unsigned short tm_ptr
; /* RISC Timer Table Pointer (internal) */
496 unsigned short r_tmr
; /* RISC Timer Mode Register */
497 unsigned short r_tmv
; /* RISC Timer Valid Register */
498 unsigned long tm_cmd
; /* RISC Timer Command Register */
499 unsigned long tm_cnt
; /* RISC Timer Internal Count */
502 /* Bits in RISC Timer Command Register */
503 #define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
504 #define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
505 #define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
506 #define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
507 #define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
509 /* CPM interrupts. There are nearly 32 interrupts generated by CPM
510 * channels or devices. All of these are presented to the PPC core
511 * as a single interrupt. The CPM interrupt handler dispatches its
512 * own handlers, in a similar fashion to the PPC core handler. We
513 * use the table as defined in the manuals (i.e. no special high
514 * priority and SCC1 == SCCa, etc...).
517 #define CPMVEC_PIO_PC15 ((ushort)0x1f)
518 #define CPMVEC_SCC1 ((ushort)0x1e)
519 #define CPMVEC_SCC2 ((ushort)0x1d)
520 #define CPMVEC_SCC3 ((ushort)0x1c)
521 #define CPMVEC_SCC4 ((ushort)0x1b)
522 #define CPMVEC_PIO_PC14 ((ushort)0x1a)
523 #define CPMVEC_TIMER1 ((ushort)0x19)
524 #define CPMVEC_PIO_PC13 ((ushort)0x18)
525 #define CPMVEC_PIO_PC12 ((ushort)0x17)
526 #define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
527 #define CPMVEC_IDMA1 ((ushort)0x15)
528 #define CPMVEC_IDMA2 ((ushort)0x14)
529 #define CPMVEC_TIMER2 ((ushort)0x12)
530 #define CPMVEC_RISCTIMER ((ushort)0x11)
531 #define CPMVEC_I2C ((ushort)0x10)
532 #define CPMVEC_PIO_PC11 ((ushort)0x0f)
533 #define CPMVEC_PIO_PC10 ((ushort)0x0e)
534 #define CPMVEC_TIMER3 ((ushort)0x0c)
535 #define CPMVEC_PIO_PC9 ((ushort)0x0b)
536 #define CPMVEC_PIO_PC8 ((ushort)0x0a)
537 #define CPMVEC_PIO_PC7 ((ushort)0x09)
538 #define CPMVEC_TIMER4 ((ushort)0x07)
539 #define CPMVEC_PIO_PC6 ((ushort)0x06)
540 #define CPMVEC_SPI ((ushort)0x05)
541 #define CPMVEC_SMC1 ((ushort)0x04)
542 #define CPMVEC_SMC2 ((ushort)0x03)
543 #define CPMVEC_PIO_PC5 ((ushort)0x02)
544 #define CPMVEC_PIO_PC4 ((ushort)0x01)
545 #define CPMVEC_ERROR ((ushort)0x00)
547 /* CPM interrupt configuration vector.
549 #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
550 #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
551 #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
552 #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
553 #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
554 #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
555 #define CICR_IEN ((uint)0x00000080) /* Int. enable */
556 #define CICR_SPS ((uint)0x00000001) /* SCC Spread */
558 #define CPM_PIN_INPUT 0
559 #define CPM_PIN_OUTPUT 1
560 #define CPM_PIN_PRIMARY 0
561 #define CPM_PIN_SECONDARY 2
562 #define CPM_PIN_GPIO 4
563 #define CPM_PIN_OPENDRAIN 8
564 #define CPM_PIN_FALLEDGE 16
565 #define CPM_PIN_ANYEDGE 0
575 void cpm1_set_pin(enum cpm_port port
, int pin
, int flags
);
583 enum cpm_clk_target
{
593 CPM_BRG1
, /* Baud Rate Generator 1 */
594 CPM_BRG2
, /* Baud Rate Generator 2 */
595 CPM_BRG3
, /* Baud Rate Generator 3 */
596 CPM_BRG4
, /* Baud Rate Generator 4 */
597 CPM_CLK1
, /* Clock 1 */
598 CPM_CLK2
, /* Clock 2 */
599 CPM_CLK3
, /* Clock 3 */
600 CPM_CLK4
, /* Clock 4 */
601 CPM_CLK5
, /* Clock 5 */
602 CPM_CLK6
, /* Clock 6 */
603 CPM_CLK7
, /* Clock 7 */
604 CPM_CLK8
, /* Clock 8 */
607 int cpm1_clk_setup(enum cpm_clk_target target
, int clock
, int mode
);
608 int cpm1_gpiochip_add16(struct device
*dev
);
609 int cpm1_gpiochip_add32(struct device
*dev
);
611 #endif /* __CPM1__ */