arch/arm/mach-h720x/cpu-h7202.c

   1 /*
   2  * linux/arch/arm/mach-h720x/cpu-h7202.c
   3  *
   4  * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
   5  *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
   6  *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
   7  *
   8  * processor specific stuff for the Hynix h7202
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/module.h>
  19 #include <asm/types.h>
  20 #include <mach/hardware.h>
  21 #include <asm/irq.h>
  22 #include <mach/irqs.h>
  23 #include <asm/mach/irq.h>
  24 #include <asm/mach/time.h>
  25 #include <linux/device.h>
  26 #include <linux/serial_8250.h>
  27 #include "common.h"
  28
  29 static struct resource h7202ps2_resources[] = {
  30         [0] = {
  31                 .start  = 0x8002c000,
  32                 .end    = 0x8002c040,
  33                 .flags  = IORESOURCE_MEM,
  34         },
  35         [1] = {
  36                 .start  = IRQ_PS2,
  37                 .end    = IRQ_PS2,
  38                 .flags  = IORESOURCE_IRQ,
  39         },
  40 };
  41
  42 static struct platform_device h7202ps2_device = {
  43         .name           = "h7202ps2",
  44         .id             = -1,
  45         .num_resources  = ARRAY_SIZE(h7202ps2_resources),
  46         .resource       = h7202ps2_resources,
  47 };
  48
  49 static struct plat_serial8250_port serial_platform_data[] = {
  50         {
  51                 .membase        = (void*)SERIAL0_VIRT,
  52                 .mapbase        = SERIAL0_BASE,
  53                 .irq            = IRQ_UART0,
  54                 .uartclk        = 2*1843200,
  55                 .regshift       = 2,
  56                 .iotype         = UPIO_MEM,
  57                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
  58         },
  59         {
  60                 .membase        = (void*)SERIAL1_VIRT,
  61                 .mapbase        = SERIAL1_BASE,
  62                 .irq            = IRQ_UART1,
  63                 .uartclk        = 2*1843200,
  64                 .regshift       = 2,
  65                 .iotype         = UPIO_MEM,
  66                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
  67         },
  68 #ifdef CONFIG_H7202_SERIAL23
  69         {
  70                 .membase        = (void*)SERIAL2_VIRT,
  71                 .mapbase        = SERIAL2_BASE,
  72                 .irq            = IRQ_UART2,
  73                 .uartclk        = 2*1843200,
  74                 .regshift       = 2,
  75                 .iotype         = UPIO_MEM,
  76                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
  77         },
  78         {
  79                 .membase        = (void*)SERIAL3_VIRT,
  80                 .mapbase        = SERIAL3_BASE,
  81                 .irq            = IRQ_UART3,
  82                 .uartclk        = 2*1843200,
  83                 .regshift       = 2,
  84                 .iotype         = UPIO_MEM,
  85                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
  86         },
  87 #endif
  88         { },
  89 };
  90
  91 static struct platform_device serial_device = {
  92         .name                   = "serial8250",
  93         .id                     = PLAT8250_DEV_PLATFORM,
  94         .dev                    = {
  95                 .platform_data  = serial_platform_data,
  96         },
  97 };
  98
  99 static struct platform_device *devices[] __initdata = {
 100         &h7202ps2_device,
 101         &serial_device,
 102 };
 103
 104 /* Although we have two interrupt lines for the timers, we only have one
 105  * status register which clears all pending timer interrupts on reading. So
 106  * we have to handle all timer interrupts in one place.
 107  */
 108 static void
 109 h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 110 {
 111         unsigned int mask, irq;
 112
 113         mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
 114
 115         if ( mask & TSTAT_T0INT ) {
 116                 timer_tick();
 117                 if( mask == TSTAT_T0INT )
 118                         return;
 119         }
 120
 121         mask >>= 1;
 122         irq = IRQ_TIMER1;
 123         while (mask) {
 124                 if (mask & 1)
 125                         generic_handle_irq(irq);
 126                 irq++;
 127                 mask >>= 1;
 128         }
 129 }
 130
 131 /*
 132  * Timer interrupt handler
 133  */
 134 static irqreturn_t
 135 h7202_timer_interrupt(int irq, void *dev_id)
 136 {
 137         h7202_timerx_demux_handler(0, NULL);
 138         return IRQ_HANDLED;
 139 }
 140
 141 /*
 142  * mask multiplexed timer IRQs
 143  */
 144 static void inline mask_timerx_irq (u32 irq)
 145 {
 146         unsigned int bit;
 147         bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
 148         CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
 149 }
 150
 151 /*
 152  * unmask multiplexed timer IRQs
 153  */
 154 static void inline unmask_timerx_irq (u32 irq)
 155 {
 156         unsigned int bit;
 157         bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
 158         CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
 159 }
 160
 161 static struct irq_chip h7202_timerx_chip = {
 162         .ack = mask_timerx_irq,
 163         .mask = mask_timerx_irq,
 164         .unmask = unmask_timerx_irq,
 165 };
 166
 167 static struct irqaction h7202_timer_irq = {
 168         .name           = "h7202 Timer Tick",
 169         .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 170         .handler        = h7202_timer_interrupt,
 171 };
 172
 173 /*
 174  * Setup TIMER0 as system timer
 175  */
 176 void __init h7202_init_time(void)
 177 {
 178         CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
 179         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
 180         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
 181         CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
 182
 183         setup_irq(IRQ_TIMER0, &h7202_timer_irq);
 184 }
 185
 186 struct sys_timer h7202_timer = {
 187         .init           = h7202_init_time,
 188         .offset         = h720x_gettimeoffset,
 189 };
 190
 191 void __init h7202_init_irq (void)
 192 {
 193         int     irq;
 194
 195         CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
 196
 197         for (irq = IRQ_TIMER1;
 198                           irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
 199                 mask_timerx_irq(irq);
 200                 set_irq_chip(irq, &h7202_timerx_chip);
 201                 set_irq_handler(irq, handle_edge_irq);
 202                 set_irq_flags(irq, IRQF_VALID );
 203         }
 204         set_irq_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
 205
 206         h720x_init_irq();
 207 }
 208
 209 void __init init_hw_h7202(void)
 210 {
 211         /* Enable clocks */
 212         CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
 213
 214         CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
 215         CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
 216 #ifdef CONFIG_H7202_SERIAL23
 217         CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
 218         CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
 219         CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
 220                                 AMULSEL_USIN3 | AMULSEL_USOUT3;
 221 #endif
 222         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
 223 }