drivers/char/rocket_int.h

   1 /*
   2  * rocket_int.h --- internal header file for rocket.c
   3  *
   4  * Written by Theodore Ts'o, Copyright 1997.
   5  * Copyright 1997 Comtrol Corporation.
   6  *
   7  */
   8
   9 /*
  10  * Definition of the types in rcktpt_type
  11  */
  12 #define ROCKET_TYPE_NORMAL      0
  13 #define ROCKET_TYPE_MODEM       1
  14 #define ROCKET_TYPE_MODEMII     2
  15 #define ROCKET_TYPE_MODEMIII    3
  16 #define ROCKET_TYPE_PC104       4
  17
  18 #include <asm/io.h>
  19 #include <asm/byteorder.h>
  20
  21 typedef unsigned char Byte_t;
  22 typedef unsigned int ByteIO_t;
  23
  24 typedef unsigned int Word_t;
  25 typedef unsigned int WordIO_t;
  26
  27 typedef unsigned long DWord_t;
  28 typedef unsigned int DWordIO_t;
  29
  30 /*
  31  * Note!  Normally the Linux I/O macros already take care of
  32  * byte-swapping the I/O instructions.  However, all accesses using
  33  * sOutDW aren't really 32-bit accesses, but should be handled in byte
  34  * order.  Hence the use of the cpu_to_le32() macro to byte-swap
  35  * things to no-op the byte swapping done by the big-endian outl()
  36  * instruction.
  37  */
  38
  39 #ifdef ROCKET_DEBUG_IO
  40 static inline void sOutB(unsigned short port, unsigned char value)
  41 {
  42 #ifdef ROCKET_DEBUG_IO
  43         printk("sOutB(%x, %x)...", port, value);
  44 #endif
  45         outb_p(value, port);
  46 }
  47
  48 static inline void sOutW(unsigned short port, unsigned short value)
  49 {
  50 #ifdef ROCKET_DEBUG_IO
  51         printk("sOutW(%x, %x)...", port, value);
  52 #endif
  53         outw_p(value, port);
  54 }
  55
  56 static inline void sOutDW(unsigned short port, unsigned long value)
  57 {
  58 #ifdef ROCKET_DEBUG_IO
  59         printk("sOutDW(%x, %lx)...", port, value);
  60 #endif
  61         outl_p(cpu_to_le32(value), port);
  62 }
  63
  64 static inline unsigned char sInB(unsigned short port)
  65 {
  66         return inb_p(port);
  67 }
  68
  69 static inline unsigned short sInW(unsigned short port)
  70 {
  71         return inw_p(port);
  72 }
  73
  74 #else                           /* !ROCKET_DEBUG_IO */
  75 #define sOutB(a, b) outb_p(b, a)
  76 #define sOutW(a, b) outw_p(b, a)
  77 #define sOutDW(port, value) outl_p(cpu_to_le32(value), port)
  78 #define sInB(a) (inb_p(a))
  79 #define sInW(a) (inw_p(a))
  80 #endif                          /* ROCKET_DEBUG_IO */
  81
  82 /* This is used to move arrays of bytes so byte swapping isn't appropriate. */
  83 #define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
  84 #define sInStrW(port, addr, count) if (count) insw(port, addr, count)
  85
  86 #define CTL_SIZE 8
  87 #define AIOP_CTL_SIZE 4
  88 #define CHAN_AIOP_SIZE 8
  89 #define MAX_PORTS_PER_AIOP 8
  90 #define MAX_AIOPS_PER_BOARD 4
  91 #define MAX_PORTS_PER_BOARD 32
  92
  93 /* Bus type ID */
  94 #define isISA   0
  95 #define isPCI   1
  96 #define isMC    2
  97
  98 /* Controller ID numbers */
  99 #define CTLID_NULL  -1          /* no controller exists */
 100 #define CTLID_0001  0x0001      /* controller release 1 */
 101
 102 /* AIOP ID numbers, identifies AIOP type implementing channel */
 103 #define AIOPID_NULL -1          /* no AIOP or channel exists */
 104 #define AIOPID_0001 0x0001      /* AIOP release 1 */
 105
 106 #define NULLDEV -1              /* identifies non-existant device */
 107 #define NULLCTL -1              /* identifies non-existant controller */
 108 #define NULLCTLPTR (CONTROLLER_T *)0    /* identifies non-existant controller */
 109 #define NULLAIOP -1             /* identifies non-existant AIOP */
 110 #define NULLCHAN -1             /* identifies non-existant channel */
 111
 112 /************************************************************************
 113  Global Register Offsets - Direct Access - Fixed values
 114 ************************************************************************/
 115
 116 #define _CMD_REG   0x38         /* Command Register            8    Write */
 117 #define _INT_CHAN  0x39         /* Interrupt Channel Register  8    Read */
 118 #define _INT_MASK  0x3A         /* Interrupt Mask Register     8    Read / Write */
 119 #define _UNUSED    0x3B         /* Unused                      8 */
 120 #define _INDX_ADDR 0x3C         /* Index Register Address      16   Write */
 121 #define _INDX_DATA 0x3E         /* Index Register Data         8/16 Read / Write */
 122
 123 /************************************************************************
 124  Channel Register Offsets for 1st channel in AIOP - Direct Access
 125 ************************************************************************/
 126 #define _TD0       0x00         /* Transmit Data               16   Write */
 127 #define _RD0       0x00         /* Receive Data                16   Read */
 128 #define _CHN_STAT0 0x20         /* Channel Status              8/16 Read / Write */
 129 #define _FIFO_CNT0 0x10         /* Transmit/Receive FIFO Count 16   Read */
 130 #define _INT_ID0   0x30         /* Interrupt Identification    8    Read */
 131
 132 /************************************************************************
 133  Tx Control Register Offsets - Indexed - External - Fixed
 134 ************************************************************************/
 135 #define _TX_ENBLS  0x980        /* Tx Processor Enables Register 8 Read / Write */
 136 #define _TXCMP1    0x988        /* Transmit Compare Value #1     8 Read / Write */
 137 #define _TXCMP2    0x989        /* Transmit Compare Value #2     8 Read / Write */
 138 #define _TXREP1B1  0x98A        /* Tx Replace Value #1 - Byte 1  8 Read / Write */
 139 #define _TXREP1B2  0x98B        /* Tx Replace Value #1 - Byte 2  8 Read / Write */
 140 #define _TXREP2    0x98C        /* Transmit Replace Value #2     8 Read / Write */
 141
 142 /************************************************************************
 143 Memory Controller Register Offsets - Indexed - External - Fixed
 144 ************************************************************************/
 145 #define _RX_FIFO    0x000       /* Rx FIFO */
 146 #define _TX_FIFO    0x800       /* Tx FIFO */
 147 #define _RXF_OUTP   0x990       /* Rx FIFO OUT pointer        16 Read / Write */
 148 #define _RXF_INP    0x992       /* Rx FIFO IN pointer         16 Read / Write */
 149 #define _TXF_OUTP   0x994       /* Tx FIFO OUT pointer        8  Read / Write */
 150 #define _TXF_INP    0x995       /* Tx FIFO IN pointer         8  Read / Write */
 151 #define _TXP_CNT    0x996       /* Tx Priority Count          8  Read / Write */
 152 #define _TXP_PNTR   0x997       /* Tx Priority Pointer        8  Read / Write */
 153
 154 #define PRI_PEND    0x80        /* Priority data pending (bit7, Tx pri cnt) */
 155 #define TXFIFO_SIZE 255         /* size of Tx FIFO */
 156 #define RXFIFO_SIZE 1023        /* size of Rx FIFO */
 157
 158 /************************************************************************
 159 Tx Priority Buffer - Indexed - External - Fixed
 160 ************************************************************************/
 161 #define _TXP_BUF    0x9C0       /* Tx Priority Buffer  32  Bytes   Read / Write */
 162 #define TXP_SIZE    0x20        /* 32 bytes */
 163
 164 /************************************************************************
 165 Channel Register Offsets - Indexed - Internal - Fixed
 166 ************************************************************************/
 167
 168 #define _TX_CTRL    0xFF0       /* Transmit Control               16  Write */
 169 #define _RX_CTRL    0xFF2       /* Receive Control                 8  Write */
 170 #define _BAUD       0xFF4       /* Baud Rate                      16  Write */
 171 #define _CLK_PRE    0xFF6       /* Clock Prescaler                 8  Write */
 172
 173 #define STMBREAK   0x08         /* BREAK */
 174 #define STMFRAME   0x04         /* framing error */
 175 #define STMRCVROVR 0x02         /* receiver over run error */
 176 #define STMPARITY  0x01         /* parity error */
 177 #define STMERROR   (STMBREAK | STMFRAME | STMPARITY)
 178 #define STMBREAKH   0x800       /* BREAK */
 179 #define STMFRAMEH   0x400       /* framing error */
 180 #define STMRCVROVRH 0x200       /* receiver over run error */
 181 #define STMPARITYH  0x100       /* parity error */
 182 #define STMERRORH   (STMBREAKH | STMFRAMEH | STMPARITYH)
 183
 184 #define CTS_ACT   0x20          /* CTS input asserted */
 185 #define DSR_ACT   0x10          /* DSR input asserted */
 186 #define CD_ACT    0x08          /* CD input asserted */
 187 #define TXFIFOMT  0x04          /* Tx FIFO is empty */
 188 #define TXSHRMT   0x02          /* Tx shift register is empty */
 189 #define RDA       0x01          /* Rx data available */
 190 #define DRAINED (TXFIFOMT | TXSHRMT)    /* indicates Tx is drained */
 191
 192 #define STATMODE  0x8000        /* status mode enable bit */
 193 #define RXFOVERFL 0x2000        /* receive FIFO overflow */
 194 #define RX2MATCH  0x1000        /* receive compare byte 2 match */
 195 #define RX1MATCH  0x0800        /* receive compare byte 1 match */
 196 #define RXBREAK   0x0400        /* received BREAK */
 197 #define RXFRAME   0x0200        /* received framing error */
 198 #define RXPARITY  0x0100        /* received parity error */
 199 #define STATERROR (RXBREAK | RXFRAME | RXPARITY)
 200
 201 #define CTSFC_EN  0x80          /* CTS flow control enable bit */
 202 #define RTSTOG_EN 0x40          /* RTS toggle enable bit */
 203 #define TXINT_EN  0x10          /* transmit interrupt enable */
 204 #define STOP2     0x08          /* enable 2 stop bits (0 = 1 stop) */
 205 #define PARITY_EN 0x04          /* enable parity (0 = no parity) */
 206 #define EVEN_PAR  0x02          /* even parity (0 = odd parity) */
 207 #define DATA8BIT  0x01          /* 8 bit data (0 = 7 bit data) */
 208
 209 #define SETBREAK  0x10          /* send break condition (must clear) */
 210 #define LOCALLOOP 0x08          /* local loopback set for test */
 211 #define SET_DTR   0x04          /* assert DTR */
 212 #define SET_RTS   0x02          /* assert RTS */
 213 #define TX_ENABLE 0x01          /* enable transmitter */
 214
 215 #define RTSFC_EN  0x40          /* RTS flow control enable */
 216 #define RXPROC_EN 0x20          /* receive processor enable */
 217 #define TRIG_NO   0x00          /* Rx FIFO trigger level 0 (no trigger) */
 218 #define TRIG_1    0x08          /* trigger level 1 char */
 219 #define TRIG_1_2  0x10          /* trigger level 1/2 */
 220 #define TRIG_7_8  0x18          /* trigger level 7/8 */
 221 #define TRIG_MASK 0x18          /* trigger level mask */
 222 #define SRCINT_EN 0x04          /* special Rx condition interrupt enable */
 223 #define RXINT_EN  0x02          /* Rx interrupt enable */
 224 #define MCINT_EN  0x01          /* modem change interrupt enable */
 225
 226 #define RXF_TRIG  0x20          /* Rx FIFO trigger level interrupt */
 227 #define TXFIFO_MT 0x10          /* Tx FIFO empty interrupt */
 228 #define SRC_INT   0x08          /* special receive condition interrupt */
 229 #define DELTA_CD  0x04          /* CD change interrupt */
 230 #define DELTA_CTS 0x02          /* CTS change interrupt */
 231 #define DELTA_DSR 0x01          /* DSR change interrupt */
 232
 233 #define REP1W2_EN 0x10          /* replace byte 1 with 2 bytes enable */
 234 #define IGN2_EN   0x08          /* ignore byte 2 enable */
 235 #define IGN1_EN   0x04          /* ignore byte 1 enable */
 236 #define COMP2_EN  0x02          /* compare byte 2 enable */
 237 #define COMP1_EN  0x01          /* compare byte 1 enable */
 238
 239 #define RESET_ALL 0x80          /* reset AIOP (all channels) */
 240 #define TXOVERIDE 0x40          /* Transmit software off override */
 241 #define RESETUART 0x20          /* reset channel's UART */
 242 #define RESTXFCNT 0x10          /* reset channel's Tx FIFO count register */
 243 #define RESRXFCNT 0x08          /* reset channel's Rx FIFO count register */
 244
 245 #define INTSTAT0  0x01          /* AIOP 0 interrupt status */
 246 #define INTSTAT1  0x02          /* AIOP 1 interrupt status */
 247 #define INTSTAT2  0x04          /* AIOP 2 interrupt status */
 248 #define INTSTAT3  0x08          /* AIOP 3 interrupt status */
 249
 250 #define INTR_EN   0x08          /* allow interrupts to host */
 251 #define INT_STROB 0x04          /* strobe and clear interrupt line (EOI) */
 252
 253 /**************************************************************************
 254  MUDBAC remapped for PCI
 255 **************************************************************************/
 256
 257 #define _CFG_INT_PCI  0x40
 258 #define _PCI_INT_FUNC 0x3A
 259
 260 #define PCI_STROB 0x2000        /* bit 13 of int aiop register */
 261 #define INTR_EN_PCI   0x0010    /* allow interrupts to host */
 262
 263 /*
 264  * Definitions for Universal PCI board registers
 265  */
 266 #define _PCI_9030_INT_CTRL      0x4c          /* Offsets from BAR1 */
 267 #define _PCI_9030_GPIO_CTRL     0x54
 268 #define PCI_INT_CTRL_AIOP       0x0001
 269 #define PCI_GPIO_CTRL_8PORT     0x4000
 270 #define _PCI_9030_RING_IND      0xc0          /* Offsets from BAR1 */
 271
 272 #define CHAN3_EN  0x08          /* enable AIOP 3 */
 273 #define CHAN2_EN  0x04          /* enable AIOP 2 */
 274 #define CHAN1_EN  0x02          /* enable AIOP 1 */
 275 #define CHAN0_EN  0x01          /* enable AIOP 0 */
 276 #define FREQ_DIS  0x00
 277 #define FREQ_274HZ 0x60
 278 #define FREQ_137HZ 0x50
 279 #define FREQ_69HZ  0x40
 280 #define FREQ_34HZ  0x30
 281 #define FREQ_17HZ  0x20
 282 #define FREQ_9HZ   0x10
 283 #define PERIODIC_ONLY 0x80      /* only PERIODIC interrupt */
 284
 285 #define CHANINT_EN 0x0100       /* flags to enable/disable channel ints */
 286
 287 #define RDATASIZE 72
 288 #define RREGDATASIZE 52
 289
 290 /*
 291  * AIOP interrupt bits for ISA/PCI boards and UPCI boards.
 292  */
 293 #define AIOP_INTR_BIT_0         0x0001
 294 #define AIOP_INTR_BIT_1         0x0002
 295 #define AIOP_INTR_BIT_2         0x0004
 296 #define AIOP_INTR_BIT_3         0x0008
 297
 298 #define AIOP_INTR_BITS ( \
 299         AIOP_INTR_BIT_0 \
 300         | AIOP_INTR_BIT_1 \
 301         | AIOP_INTR_BIT_2 \
 302         | AIOP_INTR_BIT_3)
 303
 304 #define UPCI_AIOP_INTR_BIT_0    0x0004
 305 #define UPCI_AIOP_INTR_BIT_1    0x0020
 306 #define UPCI_AIOP_INTR_BIT_2    0x0100
 307 #define UPCI_AIOP_INTR_BIT_3    0x0800
 308
 309 #define UPCI_AIOP_INTR_BITS ( \
 310         UPCI_AIOP_INTR_BIT_0 \
 311         | UPCI_AIOP_INTR_BIT_1 \
 312         | UPCI_AIOP_INTR_BIT_2 \
 313         | UPCI_AIOP_INTR_BIT_3)
 314
 315 /* Controller level information structure */
 316 typedef struct {
 317         int CtlID;
 318         int CtlNum;
 319         int BusType;
 320         int boardType;
 321         int isUPCI;
 322         WordIO_t PCIIO;
 323         WordIO_t PCIIO2;
 324         ByteIO_t MBaseIO;
 325         ByteIO_t MReg1IO;
 326         ByteIO_t MReg2IO;
 327         ByteIO_t MReg3IO;
 328         Byte_t MReg2;
 329         Byte_t MReg3;
 330         int NumAiop;
 331         int AltChanRingIndicator;
 332         ByteIO_t UPCIRingInd;
 333         WordIO_t AiopIO[AIOP_CTL_SIZE];
 334         ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE];
 335         int AiopID[AIOP_CTL_SIZE];
 336         int AiopNumChan[AIOP_CTL_SIZE];
 337         Word_t *AiopIntrBits;
 338 } CONTROLLER_T;
 339
 340 typedef CONTROLLER_T CONTROLLER_t;
 341
 342 /* Channel level information structure */
 343 typedef struct {
 344         CONTROLLER_T *CtlP;
 345         int AiopNum;
 346         int ChanID;
 347         int ChanNum;
 348         int rtsToggle;
 349
 350         ByteIO_t Cmd;
 351         ByteIO_t IntChan;
 352         ByteIO_t IntMask;
 353         DWordIO_t IndexAddr;
 354         WordIO_t IndexData;
 355
 356         WordIO_t TxRxData;
 357         WordIO_t ChanStat;
 358         WordIO_t TxRxCount;
 359         ByteIO_t IntID;
 360
 361         Word_t TxFIFO;
 362         Word_t TxFIFOPtrs;
 363         Word_t RxFIFO;
 364         Word_t RxFIFOPtrs;
 365         Word_t TxPrioCnt;
 366         Word_t TxPrioPtr;
 367         Word_t TxPrioBuf;
 368
 369         Byte_t R[RREGDATASIZE];
 370
 371         Byte_t BaudDiv[4];
 372         Byte_t TxControl[4];
 373         Byte_t RxControl[4];
 374         Byte_t TxEnables[4];
 375         Byte_t TxCompare[4];
 376         Byte_t TxReplace1[4];
 377         Byte_t TxReplace2[4];
 378 } CHANNEL_T;
 379
 380 typedef CHANNEL_T CHANNEL_t;
 381 typedef CHANNEL_T *CHANPTR_T;
 382
 383 #define InterfaceModeRS232  0x00
 384 #define InterfaceModeRS422  0x08
 385 #define InterfaceModeRS485  0x10
 386 #define InterfaceModeRS232T 0x18
 387
 388 /***************************************************************************
 389 Function: sClrBreak
 390 Purpose:  Stop sending a transmit BREAK signal
 391 Call:     sClrBreak(ChP)
 392           CHANNEL_T *ChP; Ptr to channel structure
 393 */
 394 #define sClrBreak(ChP) \
 395 do { \
 396    (ChP)->TxControl[3] &= ~SETBREAK; \
 397    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 398 } while (0)
 399
 400 /***************************************************************************
 401 Function: sClrDTR
 402 Purpose:  Clr the DTR output
 403 Call:     sClrDTR(ChP)
 404           CHANNEL_T *ChP; Ptr to channel structure
 405 */
 406 #define sClrDTR(ChP) \
 407 do { \
 408    (ChP)->TxControl[3] &= ~SET_DTR; \
 409    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 410 } while (0)
 411
 412 /***************************************************************************
 413 Function: sClrRTS
 414 Purpose:  Clr the RTS output
 415 Call:     sClrRTS(ChP)
 416           CHANNEL_T *ChP; Ptr to channel structure
 417 */
 418 #define sClrRTS(ChP) \
 419 do { \
 420    if ((ChP)->rtsToggle) break; \
 421    (ChP)->TxControl[3] &= ~SET_RTS; \
 422    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 423 } while (0)
 424
 425 /***************************************************************************
 426 Function: sClrTxXOFF
 427 Purpose:  Clear any existing transmit software flow control off condition
 428 Call:     sClrTxXOFF(ChP)
 429           CHANNEL_T *ChP; Ptr to channel structure
 430 */
 431 #define sClrTxXOFF(ChP) \
 432 do { \
 433    sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \
 434    sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \
 435 } while (0)
 436
 437 /***************************************************************************
 438 Function: sCtlNumToCtlPtr
 439 Purpose:  Convert a controller number to controller structure pointer
 440 Call:     sCtlNumToCtlPtr(CtlNum)
 441           int CtlNum; Controller number
 442 Return:   CONTROLLER_T *: Ptr to controller structure
 443 */
 444 #define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM]
 445
 446 /***************************************************************************
 447 Function: sControllerEOI
 448 Purpose:  Strobe the MUDBAC's End Of Interrupt bit.
 449 Call:     sControllerEOI(CtlP)
 450           CONTROLLER_T *CtlP; Ptr to controller structure
 451 */
 452 #define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB)
 453
 454 /***************************************************************************
 455 Function: sPCIControllerEOI
 456 Purpose:  Strobe the PCI End Of Interrupt bit.
 457           For the UPCI boards, toggle the AIOP interrupt enable bit
 458           (this was taken from the Windows driver).
 459 Call:     sPCIControllerEOI(CtlP)
 460           CONTROLLER_T *CtlP; Ptr to controller structure
 461 */
 462 #define sPCIControllerEOI(CTLP) \
 463 do { \
 464     if ((CTLP)->isUPCI) { \
 465         Word_t w = sInW((CTLP)->PCIIO); \
 466         sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \
 467         sOutW((CTLP)->PCIIO, w); \
 468     } \
 469     else { \
 470         sOutW((CTLP)->PCIIO, PCI_STROB); \
 471     } \
 472 } while (0)
 473
 474 /***************************************************************************
 475 Function: sDisAiop
 476 Purpose:  Disable I/O access to an AIOP
 477 Call:     sDisAiop(CltP)
 478           CONTROLLER_T *CtlP; Ptr to controller structure
 479           int AiopNum; Number of AIOP on controller
 480 */
 481 #define sDisAiop(CTLP,AIOPNUM) \
 482 do { \
 483    (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \
 484    sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
 485 } while (0)
 486
 487 /***************************************************************************
 488 Function: sDisCTSFlowCtl
 489 Purpose:  Disable output flow control using CTS
 490 Call:     sDisCTSFlowCtl(ChP)
 491           CHANNEL_T *ChP; Ptr to channel structure
 492 */
 493 #define sDisCTSFlowCtl(ChP) \
 494 do { \
 495    (ChP)->TxControl[2] &= ~CTSFC_EN; \
 496    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 497 } while (0)
 498
 499 /***************************************************************************
 500 Function: sDisIXANY
 501 Purpose:  Disable IXANY Software Flow Control
 502 Call:     sDisIXANY(ChP)
 503           CHANNEL_T *ChP; Ptr to channel structure
 504 */
 505 #define sDisIXANY(ChP) \
 506 do { \
 507    (ChP)->R[0x0e] = 0x86; \
 508    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \
 509 } while (0)
 510
 511 /***************************************************************************
 512 Function: DisParity
 513 Purpose:  Disable parity
 514 Call:     sDisParity(ChP)
 515           CHANNEL_T *ChP; Ptr to channel structure
 516 Comments: Function sSetParity() can be used in place of functions sEnParity(),
 517           sDisParity(), sSetOddParity(), and sSetEvenParity().
 518 */
 519 #define sDisParity(ChP) \
 520 do { \
 521    (ChP)->TxControl[2] &= ~PARITY_EN; \
 522    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 523 } while (0)
 524
 525 /***************************************************************************
 526 Function: sDisRTSToggle
 527 Purpose:  Disable RTS toggle
 528 Call:     sDisRTSToggle(ChP)
 529           CHANNEL_T *ChP; Ptr to channel structure
 530 */
 531 #define sDisRTSToggle(ChP) \
 532 do { \
 533    (ChP)->TxControl[2] &= ~RTSTOG_EN; \
 534    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 535    (ChP)->rtsToggle = 0; \
 536 } while (0)
 537
 538 /***************************************************************************
 539 Function: sDisRxFIFO
 540 Purpose:  Disable Rx FIFO
 541 Call:     sDisRxFIFO(ChP)
 542           CHANNEL_T *ChP; Ptr to channel structure
 543 */
 544 #define sDisRxFIFO(ChP) \
 545 do { \
 546    (ChP)->R[0x32] = 0x0a; \
 547    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \
 548 } while (0)
 549
 550 /***************************************************************************
 551 Function: sDisRxStatusMode
 552 Purpose:  Disable the Rx status mode
 553 Call:     sDisRxStatusMode(ChP)
 554           CHANNEL_T *ChP; Ptr to channel structure
 555 Comments: This takes the channel out of the receive status mode.  All
 556           subsequent reads of receive data using sReadRxWord() will return
 557           two data bytes.
 558 */
 559 #define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0)
 560
 561 /***************************************************************************
 562 Function: sDisTransmit
 563 Purpose:  Disable transmit
 564 Call:     sDisTransmit(ChP)
 565           CHANNEL_T *ChP; Ptr to channel structure
 566           This disables movement of Tx data from the Tx FIFO into the 1 byte
 567           Tx buffer.  Therefore there could be up to a 2 byte latency
 568           between the time sDisTransmit() is called and the transmit buffer
 569           and transmit shift register going completely empty.
 570 */
 571 #define sDisTransmit(ChP) \
 572 do { \
 573    (ChP)->TxControl[3] &= ~TX_ENABLE; \
 574    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 575 } while (0)
 576
 577 /***************************************************************************
 578 Function: sDisTxSoftFlowCtl
 579 Purpose:  Disable Tx Software Flow Control
 580 Call:     sDisTxSoftFlowCtl(ChP)
 581           CHANNEL_T *ChP; Ptr to channel structure
 582 */
 583 #define sDisTxSoftFlowCtl(ChP) \
 584 do { \
 585    (ChP)->R[0x06] = 0x8a; \
 586    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
 587 } while (0)
 588
 589 /***************************************************************************
 590 Function: sEnAiop
 591 Purpose:  Enable I/O access to an AIOP
 592 Call:     sEnAiop(CltP)
 593           CONTROLLER_T *CtlP; Ptr to controller structure
 594           int AiopNum; Number of AIOP on controller
 595 */
 596 #define sEnAiop(CTLP,AIOPNUM) \
 597 do { \
 598    (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \
 599    sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
 600 } while (0)
 601
 602 /***************************************************************************
 603 Function: sEnCTSFlowCtl
 604 Purpose:  Enable output flow control using CTS
 605 Call:     sEnCTSFlowCtl(ChP)
 606           CHANNEL_T *ChP; Ptr to channel structure
 607 */
 608 #define sEnCTSFlowCtl(ChP) \
 609 do { \
 610    (ChP)->TxControl[2] |= CTSFC_EN; \
 611    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 612 } while (0)
 613
 614 /***************************************************************************
 615 Function: sEnIXANY
 616 Purpose:  Enable IXANY Software Flow Control
 617 Call:     sEnIXANY(ChP)
 618           CHANNEL_T *ChP; Ptr to channel structure
 619 */
 620 #define sEnIXANY(ChP) \
 621 do { \
 622    (ChP)->R[0x0e] = 0x21; \
 623    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \
 624 } while (0)
 625
 626 /***************************************************************************
 627 Function: EnParity
 628 Purpose:  Enable parity
 629 Call:     sEnParity(ChP)
 630           CHANNEL_T *ChP; Ptr to channel structure
 631 Comments: Function sSetParity() can be used in place of functions sEnParity(),
 632           sDisParity(), sSetOddParity(), and sSetEvenParity().
 633
 634 Warnings: Before enabling parity odd or even parity should be chosen using
 635           functions sSetOddParity() or sSetEvenParity().
 636 */
 637 #define sEnParity(ChP) \
 638 do { \
 639    (ChP)->TxControl[2] |= PARITY_EN; \
 640    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 641 } while (0)
 642
 643 /***************************************************************************
 644 Function: sEnRTSToggle
 645 Purpose:  Enable RTS toggle
 646 Call:     sEnRTSToggle(ChP)
 647           CHANNEL_T *ChP; Ptr to channel structure
 648 Comments: This function will disable RTS flow control and clear the RTS
 649           line to allow operation of RTS toggle.
 650 */
 651 #define sEnRTSToggle(ChP) \
 652 do { \
 653    (ChP)->RxControl[2] &= ~RTSFC_EN; \
 654    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
 655    (ChP)->TxControl[2] |= RTSTOG_EN; \
 656    (ChP)->TxControl[3] &= ~SET_RTS; \
 657    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 658    (ChP)->rtsToggle = 1; \
 659 } while (0)
 660
 661 /***************************************************************************
 662 Function: sEnRxFIFO
 663 Purpose:  Enable Rx FIFO
 664 Call:     sEnRxFIFO(ChP)
 665           CHANNEL_T *ChP; Ptr to channel structure
 666 */
 667 #define sEnRxFIFO(ChP) \
 668 do { \
 669    (ChP)->R[0x32] = 0x08; \
 670    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \
 671 } while (0)
 672
 673 /***************************************************************************
 674 Function: sEnRxProcessor
 675 Purpose:  Enable the receive processor
 676 Call:     sEnRxProcessor(ChP)
 677           CHANNEL_T *ChP; Ptr to channel structure
 678 Comments: This function is used to start the receive processor.  When
 679           the channel is in the reset state the receive processor is not
 680           running.  This is done to prevent the receive processor from
 681           executing invalid microcode instructions prior to the
 682           downloading of the microcode.
 683
 684 Warnings: This function must be called after valid microcode has been
 685           downloaded to the AIOP, and it must not be called before the
 686           microcode has been downloaded.
 687 */
 688 #define sEnRxProcessor(ChP) \
 689 do { \
 690    (ChP)->RxControl[2] |= RXPROC_EN; \
 691    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
 692 } while (0)
 693
 694 /***************************************************************************
 695 Function: sEnRxStatusMode
 696 Purpose:  Enable the Rx status mode
 697 Call:     sEnRxStatusMode(ChP)
 698           CHANNEL_T *ChP; Ptr to channel structure
 699 Comments: This places the channel in the receive status mode.  All subsequent
 700           reads of receive data using sReadRxWord() will return a data byte
 701           in the low word and a status byte in the high word.
 702
 703 */
 704 #define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE)
 705
 706 /***************************************************************************
 707 Function: sEnTransmit
 708 Purpose:  Enable transmit
 709 Call:     sEnTransmit(ChP)
 710           CHANNEL_T *ChP; Ptr to channel structure
 711 */
 712 #define sEnTransmit(ChP) \
 713 do { \
 714    (ChP)->TxControl[3] |= TX_ENABLE; \
 715    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 716 } while (0)
 717
 718 /***************************************************************************
 719 Function: sEnTxSoftFlowCtl
 720 Purpose:  Enable Tx Software Flow Control
 721 Call:     sEnTxSoftFlowCtl(ChP)
 722           CHANNEL_T *ChP; Ptr to channel structure
 723 */
 724 #define sEnTxSoftFlowCtl(ChP) \
 725 do { \
 726    (ChP)->R[0x06] = 0xc5; \
 727    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
 728 } while (0)
 729
 730 /***************************************************************************
 731 Function: sGetAiopIntStatus
 732 Purpose:  Get the AIOP interrupt status
 733 Call:     sGetAiopIntStatus(CtlP,AiopNum)
 734           CONTROLLER_T *CtlP; Ptr to controller structure
 735           int AiopNum; AIOP number
 736 Return:   Byte_t: The AIOP interrupt status.  Bits 0 through 7
 737                          represent channels 0 through 7 respectively.  If a
 738                          bit is set that channel is interrupting.
 739 */
 740 #define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM])
 741
 742 /***************************************************************************
 743 Function: sGetAiopNumChan
 744 Purpose:  Get the number of channels supported by an AIOP
 745 Call:     sGetAiopNumChan(CtlP,AiopNum)
 746           CONTROLLER_T *CtlP; Ptr to controller structure
 747           int AiopNum; AIOP number
 748 Return:   int: The number of channels supported by the AIOP
 749 */
 750 #define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM]
 751
 752 /***************************************************************************
 753 Function: sGetChanIntID
 754 Purpose:  Get a channel's interrupt identification byte
 755 Call:     sGetChanIntID(ChP)
 756           CHANNEL_T *ChP; Ptr to channel structure
 757 Return:   Byte_t: The channel interrupt ID.  Can be any
 758              combination of the following flags:
 759                 RXF_TRIG:     Rx FIFO trigger level interrupt
 760                 TXFIFO_MT:    Tx FIFO empty interrupt
 761                 SRC_INT:      Special receive condition interrupt
 762                 DELTA_CD:     CD change interrupt
 763                 DELTA_CTS:    CTS change interrupt
 764                 DELTA_DSR:    DSR change interrupt
 765 */
 766 #define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR))
 767
 768 /***************************************************************************
 769 Function: sGetChanNum
 770 Purpose:  Get the number of a channel within an AIOP
 771 Call:     sGetChanNum(ChP)
 772           CHANNEL_T *ChP; Ptr to channel structure
 773 Return:   int: Channel number within AIOP, or NULLCHAN if channel does
 774                not exist.
 775 */
 776 #define sGetChanNum(ChP) (ChP)->ChanNum
 777
 778 /***************************************************************************
 779 Function: sGetChanStatus
 780 Purpose:  Get the channel status
 781 Call:     sGetChanStatus(ChP)
 782           CHANNEL_T *ChP; Ptr to channel structure
 783 Return:   Word_t: The channel status.  Can be any combination of
 784              the following flags:
 785                 LOW BYTE FLAGS
 786                 CTS_ACT:      CTS input asserted
 787                 DSR_ACT:      DSR input asserted
 788                 CD_ACT:       CD input asserted
 789                 TXFIFOMT:     Tx FIFO is empty
 790                 TXSHRMT:      Tx shift register is empty
 791                 RDA:          Rx data available
 792
 793                 HIGH BYTE FLAGS
 794                 STATMODE:     status mode enable bit
 795                 RXFOVERFL:    receive FIFO overflow
 796                 RX2MATCH:     receive compare byte 2 match
 797                 RX1MATCH:     receive compare byte 1 match
 798                 RXBREAK:      received BREAK
 799                 RXFRAME:      received framing error
 800                 RXPARITY:     received parity error
 801 Warnings: This function will clear the high byte flags in the Channel
 802           Status Register.
 803 */
 804 #define sGetChanStatus(ChP) sInW((ChP)->ChanStat)
 805
 806 /***************************************************************************
 807 Function: sGetChanStatusLo
 808 Purpose:  Get the low byte only of the channel status
 809 Call:     sGetChanStatusLo(ChP)
 810           CHANNEL_T *ChP; Ptr to channel structure
 811 Return:   Byte_t: The channel status low byte.  Can be any combination
 812              of the following flags:
 813                 CTS_ACT:      CTS input asserted
 814                 DSR_ACT:      DSR input asserted
 815                 CD_ACT:       CD input asserted
 816                 TXFIFOMT:     Tx FIFO is empty
 817                 TXSHRMT:      Tx shift register is empty
 818                 RDA:          Rx data available
 819 */
 820 #define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat)
 821
 822 /**********************************************************************
 823  * Get RI status of channel
 824  * Defined as a function in rocket.c   -aes
 825  */
 826 #if 0
 827 #define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \
 828                           (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \
 829                             (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \
 830                                (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \
 831                              0))
 832 #endif
 833
 834 /***************************************************************************
 835 Function: sGetControllerIntStatus
 836 Purpose:  Get the controller interrupt status
 837 Call:     sGetControllerIntStatus(CtlP)
 838           CONTROLLER_T *CtlP; Ptr to controller structure
 839 Return:   Byte_t: The controller interrupt status in the lower 4
 840                          bits.  Bits 0 through 3 represent AIOP's 0
 841                          through 3 respectively.  If a bit is set that
 842                          AIOP is interrupting.  Bits 4 through 7 will
 843                          always be cleared.
 844 */
 845 #define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f)
 846
 847 /***************************************************************************
 848 Function: sPCIGetControllerIntStatus
 849 Purpose:  Get the controller interrupt status
 850 Call:     sPCIGetControllerIntStatus(CtlP)
 851           CONTROLLER_T *CtlP; Ptr to controller structure
 852 Return:   unsigned char: The controller interrupt status in the lower 4
 853                          bits and bit 4.  Bits 0 through 3 represent AIOP's 0
 854                          through 3 respectively. Bit 4 is set if the int
 855                          was generated from periodic. If a bit is set the
 856                          AIOP is interrupting.
 857 */
 858 #define sPCIGetControllerIntStatus(CTLP) \
 859         ((CTLP)->isUPCI ? \
 860           (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \
 861           ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS))
 862
 863 /***************************************************************************
 864
 865 Function: sGetRxCnt
 866 Purpose:  Get the number of data bytes in the Rx FIFO
 867 Call:     sGetRxCnt(ChP)
 868           CHANNEL_T *ChP; Ptr to channel structure
 869 Return:   int: The number of data bytes in the Rx FIFO.
 870 Comments: Byte read of count register is required to obtain Rx count.
 871
 872 */
 873 #define sGetRxCnt(ChP) sInW((ChP)->TxRxCount)
 874
 875 /***************************************************************************
 876 Function: sGetTxCnt
 877 Purpose:  Get the number of data bytes in the Tx FIFO
 878 Call:     sGetTxCnt(ChP)
 879           CHANNEL_T *ChP; Ptr to channel structure
 880 Return:   Byte_t: The number of data bytes in the Tx FIFO.
 881 Comments: Byte read of count register is required to obtain Tx count.
 882
 883 */
 884 #define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount)
 885
 886 /*****************************************************************************
 887 Function: sGetTxRxDataIO
 888 Purpose:  Get the I/O address of a channel's TxRx Data register
 889 Call:     sGetTxRxDataIO(ChP)
 890           CHANNEL_T *ChP; Ptr to channel structure
 891 Return:   WordIO_t: I/O address of a channel's TxRx Data register
 892 */
 893 #define sGetTxRxDataIO(ChP) (ChP)->TxRxData
 894
 895 /***************************************************************************
 896 Function: sInitChanDefaults
 897 Purpose:  Initialize a channel structure to it's default state.
 898 Call:     sInitChanDefaults(ChP)
 899           CHANNEL_T *ChP; Ptr to the channel structure
 900 Comments: This function must be called once for every channel structure
 901           that exists before any other SSCI calls can be made.
 902
 903 */
 904 #define sInitChanDefaults(ChP) \
 905 do { \
 906    (ChP)->CtlP = NULLCTLPTR; \
 907    (ChP)->AiopNum = NULLAIOP; \
 908    (ChP)->ChanID = AIOPID_NULL; \
 909    (ChP)->ChanNum = NULLCHAN; \
 910 } while (0)
 911
 912 /***************************************************************************
 913 Function: sResetAiopByNum
 914 Purpose:  Reset the AIOP by number
 915 Call:     sResetAiopByNum(CTLP,AIOPNUM)
 916         CONTROLLER_T CTLP; Ptr to controller structure
 917         AIOPNUM; AIOP index
 918 */
 919 #define sResetAiopByNum(CTLP,AIOPNUM) \
 920 do { \
 921    sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \
 922    sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \
 923 } while (0)
 924
 925 /***************************************************************************
 926 Function: sSendBreak
 927 Purpose:  Send a transmit BREAK signal
 928 Call:     sSendBreak(ChP)
 929           CHANNEL_T *ChP; Ptr to channel structure
 930 */
 931 #define sSendBreak(ChP) \
 932 do { \
 933    (ChP)->TxControl[3] |= SETBREAK; \
 934    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 935 } while (0)
 936
 937 /***************************************************************************
 938 Function: sSetBaud
 939 Purpose:  Set baud rate
 940 Call:     sSetBaud(ChP,Divisor)
 941           CHANNEL_T *ChP; Ptr to channel structure
 942           Word_t Divisor; 16 bit baud rate divisor for channel
 943 */
 944 #define sSetBaud(ChP,DIVISOR) \
 945 do { \
 946    (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \
 947    (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \
 948    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->BaudDiv[0]); \
 949 } while (0)
 950
 951 /***************************************************************************
 952 Function: sSetData7
 953 Purpose:  Set data bits to 7
 954 Call:     sSetData7(ChP)
 955           CHANNEL_T *ChP; Ptr to channel structure
 956 */
 957 #define sSetData7(ChP) \
 958 do { \
 959    (ChP)->TxControl[2] &= ~DATA8BIT; \
 960    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 961 } while (0)
 962
 963 /***************************************************************************
 964 Function: sSetData8
 965 Purpose:  Set data bits to 8
 966 Call:     sSetData8(ChP)
 967           CHANNEL_T *ChP; Ptr to channel structure
 968 */
 969 #define sSetData8(ChP) \
 970 do { \
 971    (ChP)->TxControl[2] |= DATA8BIT; \
 972    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 973 } while (0)
 974
 975 /***************************************************************************
 976 Function: sSetDTR
 977 Purpose:  Set the DTR output
 978 Call:     sSetDTR(ChP)
 979           CHANNEL_T *ChP; Ptr to channel structure
 980 */
 981 #define sSetDTR(ChP) \
 982 do { \
 983    (ChP)->TxControl[3] |= SET_DTR; \
 984    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
 985 } while (0)
 986
 987 /***************************************************************************
 988 Function: sSetEvenParity
 989 Purpose:  Set even parity
 990 Call:     sSetEvenParity(ChP)
 991           CHANNEL_T *ChP; Ptr to channel structure
 992 Comments: Function sSetParity() can be used in place of functions sEnParity(),
 993           sDisParity(), sSetOddParity(), and sSetEvenParity().
 994
 995 Warnings: This function has no effect unless parity is enabled with function
 996           sEnParity().
 997 */
 998 #define sSetEvenParity(ChP) \
 999 do { \
1000    (ChP)->TxControl[2] |= EVEN_PAR; \
1001    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
1002 } while (0)
1003
1004 /***************************************************************************
1005 Function: sSetOddParity
1006 Purpose:  Set odd parity
1007 Call:     sSetOddParity(ChP)
1008           CHANNEL_T *ChP; Ptr to channel structure
1009 Comments: Function sSetParity() can be used in place of functions sEnParity(),
1010           sDisParity(), sSetOddParity(), and sSetEvenParity().
1011
1012 Warnings: This function has no effect unless parity is enabled with function
1013           sEnParity().
1014 */
1015 #define sSetOddParity(ChP) \
1016 do { \
1017    (ChP)->TxControl[2] &= ~EVEN_PAR; \
1018    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
1019 } while (0)
1020
1021 /***************************************************************************
1022 Function: sSetRTS
1023 Purpose:  Set the RTS output
1024 Call:     sSetRTS(ChP)
1025           CHANNEL_T *ChP; Ptr to channel structure
1026 */
1027 #define sSetRTS(ChP) \
1028 do { \
1029    if ((ChP)->rtsToggle) break; \
1030    (ChP)->TxControl[3] |= SET_RTS; \
1031    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
1032 } while (0)
1033
1034 /***************************************************************************
1035 Function: sSetRxTrigger
1036 Purpose:  Set the Rx FIFO trigger level
1037 Call:     sSetRxProcessor(ChP,Level)
1038           CHANNEL_T *ChP; Ptr to channel structure
1039           Byte_t Level; Number of characters in Rx FIFO at which the
1040              interrupt will be generated.  Can be any of the following flags:
1041
1042              TRIG_NO:   no trigger
1043              TRIG_1:    1 character in FIFO
1044              TRIG_1_2:  FIFO 1/2 full
1045              TRIG_7_8:  FIFO 7/8 full
1046 Comments: An interrupt will be generated when the trigger level is reached
1047           only if function sEnInterrupt() has been called with flag
1048           RXINT_EN set.  The RXF_TRIG flag in the Interrupt Idenfification
1049           register will be set whenever the trigger level is reached
1050           regardless of the setting of RXINT_EN.
1051
1052 */
1053 #define sSetRxTrigger(ChP,LEVEL) \
1054 do { \
1055    (ChP)->RxControl[2] &= ~TRIG_MASK; \
1056    (ChP)->RxControl[2] |= LEVEL; \
1057    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
1058 } while (0)
1059
1060 /***************************************************************************
1061 Function: sSetStop1
1062 Purpose:  Set stop bits to 1
1063 Call:     sSetStop1(ChP)
1064           CHANNEL_T *ChP; Ptr to channel structure
1065 */
1066 #define sSetStop1(ChP) \
1067 do { \
1068    (ChP)->TxControl[2] &= ~STOP2; \
1069    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
1070 } while (0)
1071
1072 /***************************************************************************
1073 Function: sSetStop2
1074 Purpose:  Set stop bits to 2
1075 Call:     sSetStop2(ChP)
1076           CHANNEL_T *ChP; Ptr to channel structure
1077 */
1078 #define sSetStop2(ChP) \
1079 do { \
1080    (ChP)->TxControl[2] |= STOP2; \
1081    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
1082 } while (0)
1083
1084 /***************************************************************************
1085 Function: sSetTxXOFFChar
1086 Purpose:  Set the Tx XOFF flow control character
1087 Call:     sSetTxXOFFChar(ChP,Ch)
1088           CHANNEL_T *ChP; Ptr to channel structure
1089           Byte_t Ch; The value to set the Tx XOFF character to
1090 */
1091 #define sSetTxXOFFChar(ChP,CH) \
1092 do { \
1093    (ChP)->R[0x07] = (CH); \
1094    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
1095 } while (0)
1096
1097 /***************************************************************************
1098 Function: sSetTxXONChar
1099 Purpose:  Set the Tx XON flow control character
1100 Call:     sSetTxXONChar(ChP,Ch)
1101           CHANNEL_T *ChP; Ptr to channel structure
1102           Byte_t Ch; The value to set the Tx XON character to
1103 */
1104 #define sSetTxXONChar(ChP,CH) \
1105 do { \
1106    (ChP)->R[0x0b] = (CH); \
1107    sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x08]); \
1108 } while (0)
1109
1110 /***************************************************************************
1111 Function: sStartRxProcessor
1112 Purpose:  Start a channel's receive processor
1113 Call:     sStartRxProcessor(ChP)
1114           CHANNEL_T *ChP; Ptr to channel structure
1115 Comments: This function is used to start a Rx processor after it was
1116           stopped with sStopRxProcessor() or sStopSWInFlowCtl().  It
1117           will restart both the Rx processor and software input flow control.
1118
1119 */
1120 #define sStartRxProcessor(ChP) sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0])
1121
1122 /***************************************************************************
1123 Function: sWriteTxByte
1124 Purpose:  Write a transmit data byte to a channel.
1125           ByteIO_t io: Channel transmit register I/O address.  This can
1126                            be obtained with sGetTxRxDataIO().
1127           Byte_t Data; The transmit data byte.
1128 Warnings: This function writes the data byte without checking to see if
1129           sMaxTxSize is exceeded in the Tx FIFO.
1130 */
1131 #define sWriteTxByte(IO,DATA) sOutB(IO,DATA)
1132
1133 /*
1134  * Begin Linux specific definitions for the Rocketport driver
1135  *
1136  * This code is Copyright Theodore Ts'o, 1995-1997
1137  */
1138
1139 struct r_port {
1140         int magic;
1141         int line;
1142         int flags;
1143         int count;
1144         int blocked_open;
1145         struct tty_struct *tty;
1146         unsigned int board:3;
1147         unsigned int aiop:2;
1148         unsigned int chan:3;
1149         CONTROLLER_t *ctlp;
1150         CHANNEL_t channel;
1151         int closing_wait;
1152         int close_delay;
1153         int intmask;
1154         int xmit_fifo_room;     /* room in xmit fifo */
1155         unsigned char *xmit_buf;
1156         int xmit_head;
1157         int xmit_tail;
1158         int xmit_cnt;
1159         int session;
1160         int pgrp;
1161         int cd_status;
1162         int ignore_status_mask;
1163         int read_status_mask;
1164         int cps;
1165
1166 #ifdef DECLARE_WAITQUEUE
1167         wait_queue_head_t open_wait;
1168         wait_queue_head_t close_wait;
1169 #else
1170         struct wait_queue *open_wait;
1171         struct wait_queue *close_wait;
1172 #endif
1173         spinlock_t slock;
1174         struct semaphore write_sem;
1175 };
1176
1177 #define RPORT_MAGIC 0x525001
1178
1179 #define NUM_BOARDS 8
1180 #define MAX_RP_PORTS (32*NUM_BOARDS)
1181
1182 /*
1183  * The size of the xmit buffer is 1 page, or 4096 bytes
1184  */
1185 #define XMIT_BUF_SIZE 4096
1186
1187 /* number of characters left in xmit buffer before we ask for more */
1188 #define WAKEUP_CHARS 256
1189
1190 /* Internal flags used only by the rocketport driver */
1191 #define ROCKET_INITIALIZED      0x80000000      /* Port is active */
1192 #define ROCKET_CLOSING          0x40000000      /* Serial port is closing */
1193 #define ROCKET_NORMAL_ACTIVE    0x20000000      /* Normal port is active */
1194
1195 /* tty subtypes */
1196 #define SERIAL_TYPE_NORMAL 1
1197
1198 /*
1199  * Assigned major numbers for the Comtrol Rocketport
1200  */
1201 #define TTY_ROCKET_MAJOR        46
1202 #define CUA_ROCKET_MAJOR        47
1203
1204 #ifdef PCI_VENDOR_ID_RP
1205 #undef PCI_VENDOR_ID_RP
1206 #undef PCI_DEVICE_ID_RP8OCTA
1207 #undef PCI_DEVICE_ID_RP8INTF
1208 #undef PCI_DEVICE_ID_RP16INTF
1209 #undef PCI_DEVICE_ID_RP32INTF
1210 #undef PCI_DEVICE_ID_URP8OCTA
1211 #undef PCI_DEVICE_ID_URP8INTF
1212 #undef PCI_DEVICE_ID_URP16INTF
1213 #undef PCI_DEVICE_ID_CRP16INTF
1214 #undef PCI_DEVICE_ID_URP32INTF
1215 #endif
1216
1217 /*  Comtrol PCI Vendor ID */
1218 #define PCI_VENDOR_ID_RP                0x11fe
1219
1220 /*  Comtrol Device ID's */
1221 #define PCI_DEVICE_ID_RP32INTF          0x0001  /* Rocketport 32 port w/external I/F     */
1222 #define PCI_DEVICE_ID_RP8INTF           0x0002  /* Rocketport 8 port w/external I/F      */
1223 #define PCI_DEVICE_ID_RP16INTF          0x0003  /* Rocketport 16 port w/external I/F     */
1224 #define PCI_DEVICE_ID_RP4QUAD           0x0004  /* Rocketport 4 port w/quad cable        */
1225 #define PCI_DEVICE_ID_RP8OCTA           0x0005  /* Rocketport 8 port w/octa cable        */
1226 #define PCI_DEVICE_ID_RP8J              0x0006  /* Rocketport 8 port w/RJ11 connectors   */
1227 #define PCI_DEVICE_ID_RP4J              0x0007  /* Rocketport 4 port w/RJ11 connectors   */
1228 #define PCI_DEVICE_ID_RP8SNI            0x0008  /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */
1229 #define PCI_DEVICE_ID_RP16SNI           0x0009  /* Rocketport 16 port w/ DB78 SNI (Siemens) connector   */
1230 #define PCI_DEVICE_ID_RPP4              0x000A  /* Rocketport Plus 4 port                */
1231 #define PCI_DEVICE_ID_RPP8              0x000B  /* Rocketport Plus 8 port                */
1232 #define PCI_DEVICE_ID_RP6M              0x000C  /* RocketModem 6 port                    */
1233 #define PCI_DEVICE_ID_RP4M              0x000D  /* RocketModem 4 port                    */
1234 #define PCI_DEVICE_ID_RP2_232           0x000E  /* Rocketport Plus 2 port RS232          */
1235 #define PCI_DEVICE_ID_RP2_422           0x000F  /* Rocketport Plus 2 port RS422          */
1236
1237 /* Universal PCI boards  */
1238 #define PCI_DEVICE_ID_URP32INTF         0x0801  /* Rocketport UPCI 32 port w/external I/F */
1239 #define PCI_DEVICE_ID_URP8INTF          0x0802  /* Rocketport UPCI 8 port w/external I/F  */
1240 #define PCI_DEVICE_ID_URP16INTF         0x0803  /* Rocketport UPCI 16 port w/external I/F */
1241 #define PCI_DEVICE_ID_URP8OCTA          0x0805  /* Rocketport UPCI 8 port w/octa cable    */
1242 #define PCI_DEVICE_ID_UPCI_RM3_8PORT    0x080C  /* Rocketmodem III 8 port                 */
1243 #define PCI_DEVICE_ID_UPCI_RM3_4PORT    0x080D  /* Rocketmodem III 4 port                 */
1244
1245 /* Compact PCI device */
1246 #define PCI_DEVICE_ID_CRP16INTF         0x0903  /* Rocketport Compact PCI 16 port w/external I/F */
1247
1248 #define TTY_GET_LINE(t) t->index
1249 #define TTY_DRIVER_MINOR_START(t) t->driver->minor_start
1250 #define TTY_DRIVER_SUBTYPE(t) t->driver->subtype
1251 #define TTY_DRIVER_NAME(t) t->driver->name
1252 #define TTY_DRIVER_NAME_BASE(t) t->driver->name_base
1253 #define TTY_DRIVER_FLUSH_BUFFER_EXISTS(t) t->driver->flush_buffer
1254 #define TTY_DRIVER_FLUSH_BUFFER(t) t->driver->flush_buffer(t)
1255
1256