drivers/message/fusion/mptctl.h

   1 /*
   2  *  linux/drivers/message/fusion/mptioctl.h
   3  *      Fusion MPT misc device (ioctl) driver.
   4  *      For use with PCI chip/adapter(s):
   5  *          LSIFC9xx/LSI409xx Fibre Channel
   6  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
   7  *
   8  *  Copyright (c) 1999-2007 LSI Logic Corporation
   9  *  (mailto:mpt_linux_developer@lsil.com)
  10  *
  11  */
  12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  13 /*
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; version 2 of the License.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     NO WARRANTY
  24     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  25     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  26     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  27     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  28     solely responsible for determining the appropriateness of using and
  29     distributing the Program and assumes all risks associated with its
  30     exercise of rights under this Agreement, including but not limited to
  31     the risks and costs of program errors, damage to or loss of data,
  32     programs or equipment, and unavailability or interruption of operations.
  33
  34     DISCLAIMER OF LIABILITY
  35     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  36     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  38     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  39     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  40     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  41     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  42
  43     You should have received a copy of the GNU General Public License
  44     along with this program; if not, write to the Free Software
  45     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  46 */
  47
  48 #ifndef MPTCTL_H_INCLUDED
  49 #define MPTCTL_H_INCLUDED
  50 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  51
  52
  53
  54 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  55 /*
  56  *
  57  */
  58 #define MPT_MISCDEV_BASENAME            "mptctl"
  59 #define MPT_MISCDEV_PATHNAME            "/dev/" MPT_MISCDEV_BASENAME
  60
  61 #define MPT_PRODUCT_LENGTH              12
  62
  63 /*
  64  *  Generic MPT Control IOCTLs and structures
  65  */
  66 #define MPT_MAGIC_NUMBER        'm'
  67
  68 #define MPTRWPERF               _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w)
  69
  70 #define MPTFWDOWNLOAD           _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer)
  71 #define MPTCOMMAND              _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command)
  72
  73 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
  74 #define MPTFWDOWNLOAD32         _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32)
  75 #define MPTCOMMAND32            _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32)
  76 #endif
  77
  78 #define MPTIOCINFO              _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo)
  79 #define MPTIOCINFO1             _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0)
  80 #define MPTIOCINFO2             _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1)
  81 #define MPTTARGETINFO           _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo)
  82 #define MPTTEST                 _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test)
  83 #define MPTEVENTQUERY           _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery)
  84 #define MPTEVENTENABLE          _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable)
  85 #define MPTEVENTREPORT          _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport)
  86 #define MPTHARDRESET            _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset)
  87 #define MPTFWREPLACE            _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw)
  88
  89 /*
  90  * SPARC PLATFORM REMARKS:
  91  * IOCTL data structures that contain pointers
  92  * will have different sizes in the driver and applications
  93  * (as the app. will not use 8-byte pointers).
  94  * Apps should use MPTFWDOWNLOAD and MPTCOMMAND.
  95  * The driver will convert data from
  96  * mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command)
  97  * internally.
  98  *
  99  * If data structures change size, must handle as in IOCGETINFO.
 100  */
 101 struct mpt_fw_xfer {
 102         unsigned int     iocnum;        /* IOC unit number */
 103         unsigned int     fwlen;
 104         void            __user *bufp;   /* Pointer to firmware buffer */
 105 };
 106
 107 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
 108 struct mpt_fw_xfer32 {
 109         unsigned int iocnum;
 110         unsigned int fwlen;
 111         u32 bufp;
 112 };
 113 #endif  /*}*/
 114
 115 /*
 116  *  IOCTL header structure.
 117  *  iocnum - must be defined.
 118  *  port - must be defined for all IOCTL commands other than MPTIOCINFO
 119  *  maxDataSize - ignored on MPTCOMMAND commands
 120  *              - ignored on MPTFWREPLACE commands
 121  *              - on query commands, reports the maximum number of bytes to be returned
 122  *                to the host driver (count includes the header).
 123  *                That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands.
 124  *                Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable
 125  *                      sized commands. (MPTTARGETINFO, MPTEVENTREPORT)
 126  */
 127 typedef struct _mpt_ioctl_header {
 128         unsigned int     iocnum;        /* IOC unit number */
 129         unsigned int     port;          /* IOC port number */
 130         int              maxDataSize;   /* Maximum Num. bytes to transfer on read */
 131 } mpt_ioctl_header;
 132
 133 /*
 134  * Issue a diagnostic reset
 135  */
 136 struct mpt_ioctl_diag_reset {
 137         mpt_ioctl_header hdr;
 138 };
 139
 140
 141 /*
 142  *  PCI bus/device/function information structure.
 143  */
 144 struct mpt_ioctl_pci_info {
 145         union {
 146                 struct {
 147                         unsigned int  deviceNumber   :  5;
 148                         unsigned int  functionNumber :  3;
 149                         unsigned int  busNumber      : 24;
 150                 } bits;
 151                 unsigned int  asUlong;
 152         } u;
 153 };
 154
 155 struct mpt_ioctl_pci_info2 {
 156         union {
 157                 struct {
 158                         unsigned int  deviceNumber   :  5;
 159                         unsigned int  functionNumber :  3;
 160                         unsigned int  busNumber      : 24;
 161                 } bits;
 162                 unsigned int  asUlong;
 163         } u;
 164   int segmentID;
 165 };
 166
 167 /*
 168  *  Adapter Information Page
 169  *  Read only.
 170  *  Data starts at offset 0xC
 171  */
 172 #define MPT_IOCTL_INTERFACE_SCSI        (0x00)
 173 #define MPT_IOCTL_INTERFACE_FC          (0x01)
 174 #define MPT_IOCTL_INTERFACE_FC_IP       (0x02)
 175 #define MPT_IOCTL_INTERFACE_SAS         (0x03)
 176 #define MPT_IOCTL_VERSION_LENGTH        (32)
 177
 178 struct mpt_ioctl_iocinfo {
 179         mpt_ioctl_header hdr;
 180         int              adapterType;   /* SCSI or FCP */
 181         int              port;          /* port number */
 182         int              pciId;         /* PCI Id. */
 183         int              hwRev;         /* hardware revision */
 184         int              subSystemDevice;       /* PCI subsystem Device ID */
 185         int              subSystemVendor;       /* PCI subsystem Vendor ID */
 186         int              numDevices;            /* number of devices */
 187         int              FWVersion;             /* FW Version (integer) */
 188         int              BIOSVersion;           /* BIOS Version (integer) */
 189         char             driverVersion[MPT_IOCTL_VERSION_LENGTH];       /* Driver Version (string) */
 190         char             busChangeEvent;
 191         char             hostId;
 192         char             rsvd[2];
 193         struct mpt_ioctl_pci_info2  pciInfo; /* Added Rev 2 */
 194 };
 195
 196 struct mpt_ioctl_iocinfo_rev1 {
 197         mpt_ioctl_header hdr;
 198         int              adapterType;   /* SCSI or FCP */
 199         int              port;          /* port number */
 200         int              pciId;         /* PCI Id. */
 201         int              hwRev;         /* hardware revision */
 202         int              subSystemDevice;       /* PCI subsystem Device ID */
 203         int              subSystemVendor;       /* PCI subsystem Vendor ID */
 204         int              numDevices;            /* number of devices */
 205         int              FWVersion;             /* FW Version (integer) */
 206         int              BIOSVersion;           /* BIOS Version (integer) */
 207         char             driverVersion[MPT_IOCTL_VERSION_LENGTH];       /* Driver Version (string) */
 208         char             busChangeEvent;
 209         char             hostId;
 210         char             rsvd[2];
 211         struct mpt_ioctl_pci_info  pciInfo; /* Added Rev 1 */
 212 };
 213
 214 /* Original structure, must always accept these
 215  * IOCTLs. 4 byte pads can occur based on arch with
 216  * above structure. Wish to re-align, but cannot.
 217  */
 218 struct mpt_ioctl_iocinfo_rev0 {
 219         mpt_ioctl_header hdr;
 220         int              adapterType;   /* SCSI or FCP */
 221         int              port;          /* port number */
 222         int              pciId;         /* PCI Id. */
 223         int              hwRev;         /* hardware revision */
 224         int              subSystemDevice;       /* PCI subsystem Device ID */
 225         int              subSystemVendor;       /* PCI subsystem Vendor ID */
 226         int              numDevices;            /* number of devices */
 227         int              FWVersion;             /* FW Version (integer) */
 228         int              BIOSVersion;           /* BIOS Version (integer) */
 229         char             driverVersion[MPT_IOCTL_VERSION_LENGTH];       /* Driver Version (string) */
 230         char             busChangeEvent;
 231         char             hostId;
 232         char             rsvd[2];
 233 };
 234
 235 /*
 236  * Device Information Page
 237  * Report the number of, and ids of, all targets
 238  * on this IOC.  The ids array is a packed structure
 239  * of the known targetInfo.
 240  * bits 31-24: reserved
 241  *      23-16: LUN
 242  *      15- 8: Bus Number
 243  *       7- 0: Target ID
 244  */
 245 struct mpt_ioctl_targetinfo {
 246         mpt_ioctl_header hdr;
 247         int              numDevices;    /* Num targets on this ioc */
 248         int              targetInfo[1];
 249 };
 250
 251
 252 /*
 253  * Event reporting IOCTL's.  These IOCTL's will
 254  * use the following defines:
 255  */
 256 struct mpt_ioctl_eventquery {
 257         mpt_ioctl_header hdr;
 258         unsigned short   eventEntries;
 259         unsigned short   reserved;
 260         unsigned int     eventTypes;
 261 };
 262
 263 struct mpt_ioctl_eventenable {
 264         mpt_ioctl_header hdr;
 265         unsigned int     eventTypes;
 266 };
 267
 268 #ifndef __KERNEL__
 269 typedef struct {
 270         uint    event;
 271         uint    eventContext;
 272         uint    data[2];
 273 } MPT_IOCTL_EVENTS;
 274 #endif
 275
 276 struct mpt_ioctl_eventreport {
 277         mpt_ioctl_header        hdr;
 278         MPT_IOCTL_EVENTS        eventData[1];
 279 };
 280
 281 #define MPT_MAX_NAME    32
 282 struct mpt_ioctl_test {
 283         mpt_ioctl_header hdr;
 284         u8               name[MPT_MAX_NAME];
 285         int              chip_type;
 286         u8               product [MPT_PRODUCT_LENGTH];
 287 };
 288
 289 /* Replace the FW image cached in host driver memory
 290  * newImageSize - image size in bytes
 291  * newImage - first byte of the new image
 292  */
 293 typedef struct mpt_ioctl_replace_fw {
 294         mpt_ioctl_header hdr;
 295         int              newImageSize;
 296         u8               newImage[1];
 297 } mpt_ioctl_replace_fw_t;
 298
 299 /* General MPT Pass through data strucutre
 300  *
 301  * iocnum
 302  * timeout - in seconds, command timeout. If 0, set by driver to
 303  *              default value.
 304  * replyFrameBufPtr - reply location
 305  * dataInBufPtr - destination for read
 306  * dataOutBufPtr - data source for write
 307  * senseDataPtr - sense data location
 308  * maxReplyBytes - maximum number of reply bytes to be sent to app.
 309  * dataInSize - num bytes for data transfer in (read)
 310  * dataOutSize - num bytes for data transfer out (write)
 311  * dataSgeOffset - offset in words from the start of the request message
 312  *              to the first SGL
 313  * MF[1];
 314  *
 315  * Remark:  Some config pages have bi-directional transfer,
 316  * both a read and a write. The basic structure allows for
 317  * a bidirectional set up. Normal messages will have one or
 318  * both of these buffers NULL.
 319  */
 320 struct mpt_ioctl_command {
 321         mpt_ioctl_header hdr;
 322         int             timeout;        /* optional (seconds) */
 323         char            __user *replyFrameBufPtr;
 324         char            __user *dataInBufPtr;
 325         char            __user *dataOutBufPtr;
 326         char            __user *senseDataPtr;
 327         int             maxReplyBytes;
 328         int             dataInSize;
 329         int             dataOutSize;
 330         int             maxSenseBytes;
 331         int             dataSgeOffset;
 332         char            MF[1];
 333 };
 334
 335 /*
 336  * SPARC PLATFORM: See earlier remark.
 337  */
 338 #if defined(__KERNEL__) && defined(CONFIG_COMPAT)
 339 struct mpt_ioctl_command32 {
 340         mpt_ioctl_header hdr;
 341         int     timeout;
 342         u32     replyFrameBufPtr;
 343         u32     dataInBufPtr;
 344         u32     dataOutBufPtr;
 345         u32     senseDataPtr;
 346         int     maxReplyBytes;
 347         int     dataInSize;
 348         int     dataOutSize;
 349         int     maxSenseBytes;
 350         int     dataSgeOffset;
 351         char    MF[1];
 352 };
 353 #endif  /*}*/
 354
 355
 356 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 357
 358 #define CPQFCTS_IOC_MAGIC 'Z'
 359 #define HP_IOC_MAGIC 'Z'
 360 #define HP_GETHOSTINFO          _IOR(HP_IOC_MAGIC, 20, hp_host_info_t)
 361 #define HP_GETHOSTINFO1         _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t)
 362 #define HP_GETTARGETINFO        _IOR(HP_IOC_MAGIC, 21, hp_target_info_t)
 363
 364 typedef struct _hp_header {
 365         unsigned int iocnum;
 366         unsigned int host;
 367         unsigned int channel;
 368         unsigned int id;
 369         unsigned int lun;
 370 } hp_header_t;
 371
 372 /*
 373  *  Header:
 374  *  iocnum      required (input)
 375  *  host        ignored
 376  *  channe      ignored
 377  *  id          ignored
 378  *  lun         ignored
 379  */
 380 typedef struct _hp_host_info {
 381         hp_header_t      hdr;
 382         u16              vendor;
 383         u16              device;
 384         u16              subsystem_vendor;
 385         u16              subsystem_id;
 386         u8               devfn;
 387         u8               bus;
 388         ushort           host_no;               /* SCSI Host number, if scsi driver not loaded*/
 389         u8               fw_version[16];        /* string */
 390         u8               serial_number[24];     /* string */
 391         u32              ioc_status;
 392         u32              bus_phys_width;
 393         u32              base_io_addr;
 394         u32              rsvd;
 395         unsigned int     hard_resets;           /* driver initiated resets */
 396         unsigned int     soft_resets;           /* ioc, external resets */
 397         unsigned int     timeouts;              /* num timeouts */
 398 } hp_host_info_t;
 399
 400 /* replace ulongs with uints, need to preserve backwards
 401  * compatibility.
 402  */
 403 typedef struct _hp_host_info_rev0 {
 404         hp_header_t      hdr;
 405         u16              vendor;
 406         u16              device;
 407         u16              subsystem_vendor;
 408         u16              subsystem_id;
 409         u8               devfn;
 410         u8               bus;
 411         ushort           host_no;               /* SCSI Host number, if scsi driver not loaded*/
 412         u8               fw_version[16];        /* string */
 413         u8               serial_number[24];     /* string */
 414         u32              ioc_status;
 415         u32              bus_phys_width;
 416         u32              base_io_addr;
 417         u32              rsvd;
 418         unsigned long    hard_resets;           /* driver initiated resets */
 419         unsigned long    soft_resets;           /* ioc, external resets */
 420         unsigned long    timeouts;              /* num timeouts */
 421 } hp_host_info_rev0_t;
 422
 423 /*
 424  *  Header:
 425  *  iocnum      required (input)
 426  *  host        required
 427  *  channel     required        (bus number)
 428  *  id          required
 429  *  lun         ignored
 430  *
 431  *  All error values between 0 and 0xFFFF in size.
 432  */
 433 typedef struct _hp_target_info {
 434         hp_header_t      hdr;
 435         u32 parity_errors;
 436         u32 phase_errors;
 437         u32 select_timeouts;
 438         u32 message_rejects;
 439         u32 negotiated_speed;
 440         u8  negotiated_width;
 441         u8  rsvd[7];                            /* 8 byte alignment */
 442 } hp_target_info_t;
 443
 444 #define HP_STATUS_OTHER         1
 445 #define HP_STATUS_OK            2
 446 #define HP_STATUS_FAILED        3
 447
 448 #define HP_BUS_WIDTH_UNK        1
 449 #define HP_BUS_WIDTH_8          2
 450 #define HP_BUS_WIDTH_16         3
 451 #define HP_BUS_WIDTH_32         4
 452
 453 #define HP_DEV_SPEED_ASYNC      2
 454 #define HP_DEV_SPEED_FAST       3
 455 #define HP_DEV_SPEED_ULTRA      4
 456 #define HP_DEV_SPEED_ULTRA2     5
 457 #define HP_DEV_SPEED_ULTRA160   6
 458 #define HP_DEV_SPEED_SCSI1      7
 459 #define HP_DEV_SPEED_ULTRA320   8
 460
 461 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 462
 463
 464 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 465
 466 #endif
 467