?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.20.7
[linux/fpc-iii.git] / drivers / net / sky2.c
blob38e75cf6217f4db904be2ad715d2515277796271
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/crc32.h>
26 #include <linux/kernel.h>
27 #include <linux/version.h>
28 #include <linux/module.h>
29 #include <linux/netdevice.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/etherdevice.h>
32 #include <linux/ethtool.h>
33 #include <linux/pci.h>
34 #include <linux/ip.h>
35 #include <linux/tcp.h>
36 #include <linux/in.h>
37 #include <linux/delay.h>
38 #include <linux/workqueue.h>
39 #include <linux/if_vlan.h>
40 #include <linux/prefetch.h>
41 #include <linux/mii.h>
42
43 #include <asm/irq.h>
44
45 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
46 #define SKY2_VLAN_TAG_USED 1
47 #endif
48
49 #include "sky2.h"
50
51 #define DRV_NAME "sky2"
52 #define DRV_VERSION "1.10"
53 #define PFX DRV_NAME " "
54
55 /*
56 * The Yukon II chipset takes 64 bit command blocks (called list elements)
57 * that are organized into three (receive, transmit, status) different rings
58 * similar to Tigon3.
59 */
60
61 #define RX_LE_SIZE 1024
62 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
63 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
64 #define RX_DEF_PENDING RX_MAX_PENDING
65 #define RX_SKB_ALIGN 8
66 #define RX_BUF_WRITE 16
67
68 #define TX_RING_SIZE 512
69 #define TX_DEF_PENDING (TX_RING_SIZE - 1)
70 #define TX_MIN_PENDING 64
71 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
72
73 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
74 #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
75 #define TX_WATCHDOG (5 * HZ)
76 #define NAPI_WEIGHT 64
77 #define PHY_RETRIES 1000
78
79 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
80
81 static const u32 default_msg =
82 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
83 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
84 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
85
86 static int debug = -1; /* defaults above */
87 module_param(debug, int, 0);
88 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
89
90 static int copybreak __read_mostly = 128;
91 module_param(copybreak, int, 0);
92 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
93
94 static int disable_msi = 0;
95 module_param(disable_msi, int, 0);
96 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
97
98 static int idle_timeout = 0;
99 module_param(idle_timeout, int, 0);
100 MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
101
102 static const struct pci_device_id sky2_id_table[] = {
103 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
104 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
106 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
107 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
108 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
129 { 0 }
130 };
131
132 MODULE_DEVICE_TABLE(pci, sky2_id_table);
133
134 /* Avoid conditionals by using array */
135 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
136 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
137 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
138
139 /* This driver supports yukon2 chipset only */
140 static const char *yukon2_name[] = {
141 "XL", /* 0xb3 */
142 "EC Ultra", /* 0xb4 */
143 "UNKNOWN", /* 0xb5 */
144 "EC", /* 0xb6 */
145 "FE", /* 0xb7 */
146 };
147
148 /* Access to external PHY */
149 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
150 {
151 int i;
152
153 gma_write16(hw, port, GM_SMI_DATA, val);
154 gma_write16(hw, port, GM_SMI_CTRL,
155 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
156
157 for (i = 0; i < PHY_RETRIES; i++) {
158 if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
159 return 0;
160 udelay(1);
161 }
162
163 printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
164 return -ETIMEDOUT;
165 }
166
167 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
168 {
169 int i;
170
171 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
172 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
173
174 for (i = 0; i < PHY_RETRIES; i++) {
175 if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
176 *val = gma_read16(hw, port, GM_SMI_DATA);
177 return 0;
178 }
179
180 udelay(1);
181 }
182
183 return -ETIMEDOUT;
184 }
185
186 static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
187 {
188 u16 v;
189
190 if (__gm_phy_read(hw, port, reg, &v) != 0)
191 printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
192 return v;
193 }
194
195 static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
196 {
197 u16 power_control;
198 int vaux;
199
200 pr_debug("sky2_set_power_state %d\n", state);
201 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
202
203 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
204 vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
205 (power_control & PCI_PM_CAP_PME_D3cold);
206
207 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
208
209 power_control |= PCI_PM_CTRL_PME_STATUS;
210 power_control &= ~(PCI_PM_CTRL_STATE_MASK);
211
212 switch (state) {
213 case PCI_D0:
214 /* switch power to VCC (WA for VAUX problem) */
215 sky2_write8(hw, B0_POWER_CTRL,
216 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
217
218 /* disable Core Clock Division, */
219 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
220
221 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
222 /* enable bits are inverted */
223 sky2_write8(hw, B2_Y2_CLK_GATE,
224 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
225 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
226 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
227 else
228 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
229
230 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
231 u32 reg1;
232
233 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
234 reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
235 reg1 &= P_ASPM_CONTROL_MSK;
236 sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
237 sky2_pci_write32(hw, PCI_DEV_REG5, 0);
238 }
239
240 break;
241
242 case PCI_D3hot:
243 case PCI_D3cold:
244 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
245 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
246 else
247 /* enable bits are inverted */
248 sky2_write8(hw, B2_Y2_CLK_GATE,
249 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
250 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
251 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
252
253 /* switch power to VAUX */
254 if (vaux && state != PCI_D3cold)
255 sky2_write8(hw, B0_POWER_CTRL,
256 (PC_VAUX_ENA | PC_VCC_ENA |
257 PC_VAUX_ON | PC_VCC_OFF));
258 break;
259 default:
260 printk(KERN_ERR PFX "Unknown power state %d\n", state);
261 }
262
263 sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
264 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
265 }
266
267 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
268 {
269 u16 reg;
270
271 /* disable all GMAC IRQ's */
272 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
273 /* disable PHY IRQs */
274 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
275
276 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
277 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
278 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
279 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
280
281 reg = gma_read16(hw, port, GM_RX_CTRL);
282 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
283 gma_write16(hw, port, GM_RX_CTRL, reg);
284 }
285
286 /* flow control to advertise bits */
287 static const u16 copper_fc_adv[] = {
288 [FC_NONE] = 0,
289 [FC_TX] = PHY_M_AN_ASP,
290 [FC_RX] = PHY_M_AN_PC,
291 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
292 };
293
294 /* flow control to advertise bits when using 1000BaseX */
295 static const u16 fiber_fc_adv[] = {
296 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
297 [FC_TX] = PHY_M_P_ASYM_MD_X,
298 [FC_RX] = PHY_M_P_SYM_MD_X,
299 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
300 };
301
302 /* flow control to GMA disable bits */
303 static const u16 gm_fc_disable[] = {
304 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
305 [FC_TX] = GM_GPCR_FC_RX_DIS,
306 [FC_RX] = GM_GPCR_FC_TX_DIS,
307 [FC_BOTH] = 0,
308 };
309
310
311 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
312 {
313 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
314 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
315
316 if (sky2->autoneg == AUTONEG_ENABLE &&
317 !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
318 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
319
320 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
321 PHY_M_EC_MAC_S_MSK);
322 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
323
324 if (hw->chip_id == CHIP_ID_YUKON_EC)
325 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
326 else
327 ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3);
328
329 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
330 }
331
332 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
333 if (sky2_is_copper(hw)) {
334 if (hw->chip_id == CHIP_ID_YUKON_FE) {
335 /* enable automatic crossover */
336 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
337 } else {
338 /* disable energy detect */
339 ctrl &= ~PHY_M_PC_EN_DET_MSK;
340
341 /* enable automatic crossover */
342 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
343
344 if (sky2->autoneg == AUTONEG_ENABLE &&
345 (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
346 ctrl &= ~PHY_M_PC_DSC_MSK;
347 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
348 }
349 }
350 } else {
351 /* workaround for deviation #4.88 (CRC errors) */
352 /* disable Automatic Crossover */
353
354 ctrl &= ~PHY_M_PC_MDIX_MSK;
355 }
356
357 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
358
359 /* special setup for PHY 88E1112 Fiber */
360 if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) {
361 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
362
363 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
364 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
365 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
366 ctrl &= ~PHY_M_MAC_MD_MSK;
367 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
368 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
369
370 if (hw->pmd_type == 'P') {
371 /* select page 1 to access Fiber registers */
372 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
373
374 /* for SFP-module set SIGDET polarity to low */
375 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
376 ctrl |= PHY_M_FIB_SIGD_POL;
377 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
378 }
379
380 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
381 }
382
383 ctrl = PHY_CT_RESET;
384 ct1000 = 0;
385 adv = PHY_AN_CSMA;
386 reg = 0;
387
388 if (sky2->autoneg == AUTONEG_ENABLE) {
389 if (sky2_is_copper(hw)) {
390 if (sky2->advertising & ADVERTISED_1000baseT_Full)
391 ct1000 |= PHY_M_1000C_AFD;
392 if (sky2->advertising & ADVERTISED_1000baseT_Half)
393 ct1000 |= PHY_M_1000C_AHD;
394 if (sky2->advertising & ADVERTISED_100baseT_Full)
395 adv |= PHY_M_AN_100_FD;
396 if (sky2->advertising & ADVERTISED_100baseT_Half)
397 adv |= PHY_M_AN_100_HD;
398 if (sky2->advertising & ADVERTISED_10baseT_Full)
399 adv |= PHY_M_AN_10_FD;
400 if (sky2->advertising & ADVERTISED_10baseT_Half)
401 adv |= PHY_M_AN_10_HD;
402
403 adv |= copper_fc_adv[sky2->flow_mode];
404 } else { /* special defines for FIBER (88E1040S only) */
405 if (sky2->advertising & ADVERTISED_1000baseT_Full)
406 adv |= PHY_M_AN_1000X_AFD;
407 if (sky2->advertising & ADVERTISED_1000baseT_Half)
408 adv |= PHY_M_AN_1000X_AHD;
409
410 adv |= fiber_fc_adv[sky2->flow_mode];
411 }
412
413 /* Restart Auto-negotiation */
414 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
415 } else {
416 /* forced speed/duplex settings */
417 ct1000 = PHY_M_1000C_MSE;
418
419 /* Disable auto update for duplex flow control and speed */
420 reg |= GM_GPCR_AU_ALL_DIS;
421
422 switch (sky2->speed) {
423 case SPEED_1000:
424 ctrl |= PHY_CT_SP1000;
425 reg |= GM_GPCR_SPEED_1000;
426 break;
427 case SPEED_100:
428 ctrl |= PHY_CT_SP100;
429 reg |= GM_GPCR_SPEED_100;
430 break;
431 }
432
433 if (sky2->duplex == DUPLEX_FULL) {
434 reg |= GM_GPCR_DUP_FULL;
435 ctrl |= PHY_CT_DUP_MD;
436 } else if (sky2->speed < SPEED_1000)
437 sky2->flow_mode = FC_NONE;
438
439
440 reg |= gm_fc_disable[sky2->flow_mode];
441
442 /* Forward pause packets to GMAC? */
443 if (sky2->flow_mode & FC_RX)
444 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
445 else
446 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
447 }
448
449 gma_write16(hw, port, GM_GP_CTRL, reg);
450
451 if (hw->chip_id != CHIP_ID_YUKON_FE)
452 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
453
454 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
455 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
456
457 /* Setup Phy LED's */
458 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
459 ledover = 0;
460
461 switch (hw->chip_id) {
462 case CHIP_ID_YUKON_FE:
463 /* on 88E3082 these bits are at 11..9 (shifted left) */
464 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
465
466 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
467
468 /* delete ACT LED control bits */
469 ctrl &= ~PHY_M_FELP_LED1_MSK;
470 /* change ACT LED control to blink mode */
471 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
472 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
473 break;
474
475 case CHIP_ID_YUKON_XL:
476 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
477
478 /* select page 3 to access LED control register */
479 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
480
481 /* set LED Function Control register */
482 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
483 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
484 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
485 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
486 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
487
488 /* set Polarity Control register */
489 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
490 (PHY_M_POLC_LS1_P_MIX(4) |
491 PHY_M_POLC_IS0_P_MIX(4) |
492 PHY_M_POLC_LOS_CTRL(2) |
493 PHY_M_POLC_INIT_CTRL(2) |
494 PHY_M_POLC_STA1_CTRL(2) |
495 PHY_M_POLC_STA0_CTRL(2)));
496
497 /* restore page register */
498 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
499 break;
500 case CHIP_ID_YUKON_EC_U:
501 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
502
503 /* select page 3 to access LED control register */
504 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
505
506 /* set LED Function Control register */
507 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
508 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
509 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
510 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
511 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
512
513 /* set Blink Rate in LED Timer Control Register */
514 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
515 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
516 /* restore page register */
517 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
518 break;
519
520 default:
521 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
522 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
523 /* turn off the Rx LED (LED_RX) */
524 ledover &= ~PHY_M_LED_MO_RX;
525 }
526
527 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
528 hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
529 /* apply fixes in PHY AFE */
530 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
531
532 /* increase differential signal amplitude in 10BASE-T */
533 gm_phy_write(hw, port, 0x18, 0xaa99);
534 gm_phy_write(hw, port, 0x17, 0x2011);
535
536 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
537 gm_phy_write(hw, port, 0x18, 0xa204);
538 gm_phy_write(hw, port, 0x17, 0x2002);
539
540 /* set page register to 0 */
541 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
542 } else {
543 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
544
545 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
546 /* turn on 100 Mbps LED (LED_LINK100) */
547 ledover |= PHY_M_LED_MO_100;
548 }
549
550 if (ledover)
551 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
552
553 }
554
555 /* Enable phy interrupt on auto-negotiation complete (or link up) */
556 if (sky2->autoneg == AUTONEG_ENABLE)
557 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
558 else
559 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
560 }
561
562 static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
563 {
564 u32 reg1;
565 static const u32 phy_power[]
566 = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
567
568 /* looks like this XL is back asswards .. */
569 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
570 onoff = !onoff;
571
572 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
573 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
574 if (onoff)
575 /* Turn off phy power saving */
576 reg1 &= ~phy_power[port];
577 else
578 reg1 |= phy_power[port];
579
580 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
581 sky2_pci_read32(hw, PCI_DEV_REG1);
582 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
583 udelay(100);
584 }
585
586 /* Force a renegotiation */
587 static void sky2_phy_reinit(struct sky2_port *sky2)
588 {
589 spin_lock_bh(&sky2->phy_lock);
590 sky2_phy_init(sky2->hw, sky2->port);
591 spin_unlock_bh(&sky2->phy_lock);
592 }
593
594 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
595 {
596 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
597 u16 reg;
598 int i;
599 const u8 *addr = hw->dev[port]->dev_addr;
600
601 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
602 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE);
603
604 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
605
606 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
607 /* WA DEV_472 -- looks like crossed wires on port 2 */
608 /* clear GMAC 1 Control reset */
609 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
610 do {
611 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
612 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
613 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
614 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
615 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
616 }
617
618 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
619
620 /* Enable Transmit FIFO Underrun */
621 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
622
623 spin_lock_bh(&sky2->phy_lock);
624 sky2_phy_init(hw, port);
625 spin_unlock_bh(&sky2->phy_lock);
626
627 /* MIB clear */
628 reg = gma_read16(hw, port, GM_PHY_ADDR);
629 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
630
631 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
632 gma_read16(hw, port, i);
633 gma_write16(hw, port, GM_PHY_ADDR, reg);
634
635 /* transmit control */
636 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
637
638 /* receive control reg: unicast + multicast + no FCS */
639 gma_write16(hw, port, GM_RX_CTRL,
640 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
641
642 /* transmit flow control */
643 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
644
645 /* transmit parameter */
646 gma_write16(hw, port, GM_TX_PARAM,
647 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
648 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
649 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
650 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
651
652 /* serial mode register */
653 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
654 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
655
656 if (hw->dev[port]->mtu > ETH_DATA_LEN)
657 reg |= GM_SMOD_JUMBO_ENA;
658
659 gma_write16(hw, port, GM_SERIAL_MODE, reg);
660
661 /* virtual address for data */
662 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
663
664 /* physical address: used for pause frames */
665 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
666
667 /* ignore counter overflows */
668 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
669 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
670 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
671
672 /* Configure Rx MAC FIFO */
673 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
674 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
675 GMF_OPER_ON | GMF_RX_F_FL_ON);
676
677 /* Flush Rx MAC FIFO on any flow control or error */
678 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
679
680 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
681 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
682
683 /* Configure Tx MAC FIFO */
684 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
685 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
686
687 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
688 sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
689 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
690 if (hw->dev[port]->mtu > ETH_DATA_LEN) {
691 /* set Tx GMAC FIFO Almost Empty Threshold */
692 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
693 /* Disable Store & Forward mode for TX */
694 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
695 }
696 }
697
698 }
699
700 /* Assign Ram Buffer allocation to queue */
701 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
702 {
703 u32 end;
704
705 /* convert from K bytes to qwords used for hw register */
706 start *= 1024/8;
707 space *= 1024/8;
708 end = start + space - 1;
709
710 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
711 sky2_write32(hw, RB_ADDR(q, RB_START), start);
712 sky2_write32(hw, RB_ADDR(q, RB_END), end);
713 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
714 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
715
716 if (q == Q_R1 || q == Q_R2) {
717 u32 tp = space - space/4;
718
719 /* On receive queue's set the thresholds
720 * give receiver priority when > 3/4 full
721 * send pause when down to 2K
722 */
723 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
724 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
725
726 tp = space - 2048/8;
727 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
728 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
729 } else {
730 /* Enable store & forward on Tx queue's because
731 * Tx FIFO is only 1K on Yukon
732 */
733 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
734 }
735
736 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
737 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
738 }
739
740 /* Setup Bus Memory Interface */
741 static void sky2_qset(struct sky2_hw *hw, u16 q)
742 {
743 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
744 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
745 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
746 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
747 }
748
749 /* Setup prefetch unit registers. This is the interface between
750 * hardware and driver list elements
751 */
752 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
753 u64 addr, u32 last)
754 {
755 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
756 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
757 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
758 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
759 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
760 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
761
762 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
763 }
764
765 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
766 {
767 struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
768
769 sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
770 le->ctrl = 0;
771 return le;
772 }
773
774 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
775 struct sky2_tx_le *le)
776 {
777 return sky2->tx_ring + (le - sky2->tx_le);
778 }
779
780 /* Update chip's next pointer */
781 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
782 {
783 q = Y2_QADDR(q, PREF_UNIT_PUT_IDX);
784 wmb();
785 sky2_write16(hw, q, idx);
786 sky2_read16(hw, q);
787 }
788
789
790 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
791 {
792 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
793 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
794 le->ctrl = 0;
795 return le;
796 }
797
798 /* Return high part of DMA address (could be 32 or 64 bit) */
799 static inline u32 high32(dma_addr_t a)
800 {
801 return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0;
802 }
803
804 /* Build description to hardware for one receive segment */
805 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
806 dma_addr_t map, unsigned len)
807 {
808 struct sky2_rx_le *le;
809 u32 hi = high32(map);
810
811 if (sky2->rx_addr64 != hi) {
812 le = sky2_next_rx(sky2);
813 le->addr = cpu_to_le32(hi);
814 le->opcode = OP_ADDR64 | HW_OWNER;
815 sky2->rx_addr64 = high32(map + len);
816 }
817
818 le = sky2_next_rx(sky2);
819 le->addr = cpu_to_le32((u32) map);
820 le->length = cpu_to_le16(len);
821 le->opcode = op | HW_OWNER;
822 }
823
824 /* Build description to hardware for one possibly fragmented skb */
825 static void sky2_rx_submit(struct sky2_port *sky2,
826 const struct rx_ring_info *re)
827 {
828 int i;
829
830 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
831
832 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
833 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
834 }
835
836
837 static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
838 unsigned size)
839 {
840 struct sk_buff *skb = re->skb;
841 int i;
842
843 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
844 pci_unmap_len_set(re, data_size, size);
845
846 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
847 re->frag_addr[i] = pci_map_page(pdev,
848 skb_shinfo(skb)->frags[i].page,
849 skb_shinfo(skb)->frags[i].page_offset,
850 skb_shinfo(skb)->frags[i].size,
851 PCI_DMA_FROMDEVICE);
852 }
853
854 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
855 {
856 struct sk_buff *skb = re->skb;
857 int i;
858
859 pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size),
860 PCI_DMA_FROMDEVICE);
861
862 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
863 pci_unmap_page(pdev, re->frag_addr[i],
864 skb_shinfo(skb)->frags[i].size,
865 PCI_DMA_FROMDEVICE);
866 }
867
868 /* Tell chip where to start receive checksum.
869 * Actually has two checksums, but set both same to avoid possible byte
870 * order problems.
871 */
872 static void rx_set_checksum(struct sky2_port *sky2)
873 {
874 struct sky2_rx_le *le;
875
876 le = sky2_next_rx(sky2);
877 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
878 le->ctrl = 0;
879 le->opcode = OP_TCPSTART | HW_OWNER;
880
881 sky2_write32(sky2->hw,
882 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
883 sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
884
885 }
886
887 /*
888 * The RX Stop command will not work for Yukon-2 if the BMU does not
889 * reach the end of packet and since we can't make sure that we have
890 * incoming data, we must reset the BMU while it is not doing a DMA
891 * transfer. Since it is possible that the RX path is still active,
892 * the RX RAM buffer will be stopped first, so any possible incoming
893 * data will not trigger a DMA. After the RAM buffer is stopped, the
894 * BMU is polled until any DMA in progress is ended and only then it
895 * will be reset.
896 */
897 static void sky2_rx_stop(struct sky2_port *sky2)
898 {
899 struct sky2_hw *hw = sky2->hw;
900 unsigned rxq = rxqaddr[sky2->port];
901 int i;
902
903 /* disable the RAM Buffer receive queue */
904 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
905
906 for (i = 0; i < 0xffff; i++)
907 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
908 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
909 goto stopped;
910
911 printk(KERN_WARNING PFX "%s: receiver stop failed\n",
912 sky2->netdev->name);
913 stopped:
914 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
915
916 /* reset the Rx prefetch unit */
917 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
918 }
919
920 /* Clean out receive buffer area, assumes receiver hardware stopped */
921 static void sky2_rx_clean(struct sky2_port *sky2)
922 {
923 unsigned i;
924
925 memset(sky2->rx_le, 0, RX_LE_BYTES);
926 for (i = 0; i < sky2->rx_pending; i++) {
927 struct rx_ring_info *re = sky2->rx_ring + i;
928
929 if (re->skb) {
930 sky2_rx_unmap_skb(sky2->hw->pdev, re);
931 kfree_skb(re->skb);
932 re->skb = NULL;
933 }
934 }
935 }
936
937 /* Basic MII support */
938 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
939 {
940 struct mii_ioctl_data *data = if_mii(ifr);
941 struct sky2_port *sky2 = netdev_priv(dev);
942 struct sky2_hw *hw = sky2->hw;
943 int err = -EOPNOTSUPP;
944
945 if (!netif_running(dev))
946 return -ENODEV; /* Phy still in reset */
947
948 switch (cmd) {
949 case SIOCGMIIPHY:
950 data->phy_id = PHY_ADDR_MARV;
951
952 /* fallthru */
953 case SIOCGMIIREG: {
954 u16 val = 0;
955
956 spin_lock_bh(&sky2->phy_lock);
957 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
958 spin_unlock_bh(&sky2->phy_lock);
959
960 data->val_out = val;
961 break;
962 }
963
964 case SIOCSMIIREG:
965 if (!capable(CAP_NET_ADMIN))
966 return -EPERM;
967
968 spin_lock_bh(&sky2->phy_lock);
969 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
970 data->val_in);
971 spin_unlock_bh(&sky2->phy_lock);
972 break;
973 }
974 return err;
975 }
976
977 #ifdef SKY2_VLAN_TAG_USED
978 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
979 {
980 struct sky2_port *sky2 = netdev_priv(dev);
981 struct sky2_hw *hw = sky2->hw;
982 u16 port = sky2->port;
983
984 netif_tx_lock_bh(dev);
985
986 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON);
987 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON);
988 sky2->vlgrp = grp;
989
990 netif_tx_unlock_bh(dev);
991 }
992
993 static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
994 {
995 struct sky2_port *sky2 = netdev_priv(dev);
996 struct sky2_hw *hw = sky2->hw;
997 u16 port = sky2->port;
998
999 netif_tx_lock_bh(dev);
1000
1001 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
1002 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
1003 if (sky2->vlgrp)
1004 sky2->vlgrp->vlan_devices[vid] = NULL;
1005
1006 netif_tx_unlock_bh(dev);
1007 }
1008 #endif
1009
1010 /*
1011 * Allocate an skb for receiving. If the MTU is large enough
1012 * make the skb non-linear with a fragment list of pages.
1013 *
1014 * It appears the hardware has a bug in the FIFO logic that
1015 * cause it to hang if the FIFO gets overrun and the receive buffer
1016 * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
1017 * aligned except if slab debugging is enabled.
1018 */
1019 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
1020 {
1021 struct sk_buff *skb;
1022 unsigned long p;
1023 int i;
1024
1025 skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN);
1026 if (!skb)
1027 goto nomem;
1028
1029 p = (unsigned long) skb->data;
1030 skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
1031
1032 for (i = 0; i < sky2->rx_nfrags; i++) {
1033 struct page *page = alloc_page(GFP_ATOMIC);
1034
1035 if (!page)
1036 goto free_partial;
1037 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1038 }
1039
1040 return skb;
1041 free_partial:
1042 kfree_skb(skb);
1043 nomem:
1044 return NULL;
1045 }
1046
1047 /*
1048 * Allocate and setup receiver buffer pool.
1049 * Normal case this ends up creating one list element for skb
1050 * in the receive ring. Worst case if using large MTU and each
1051 * allocation falls on a different 64 bit region, that results
1052 * in 6 list elements per ring entry.
1053 * One element is used for checksum enable/disable, and one
1054 * extra to avoid wrap.
1055 */
1056 static int sky2_rx_start(struct sky2_port *sky2)
1057 {
1058 struct sky2_hw *hw = sky2->hw;
1059 struct rx_ring_info *re;
1060 unsigned rxq = rxqaddr[sky2->port];
1061 unsigned i, size, space, thresh;
1062
1063 sky2->rx_put = sky2->rx_next = 0;
1064 sky2_qset(hw, rxq);
1065
1066 /* On PCI express lowering the watermark gives better performance */
1067 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
1068 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1069
1070 /* These chips have no ram buffer?
1071 * MAC Rx RAM Read is controlled by hardware */
1072 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1073 (hw->chip_rev == CHIP_REV_YU_EC_U_A1
1074 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1075 sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
1076
1077 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1078
1079 rx_set_checksum(sky2);
1080
1081 /* Space needed for frame data + headers rounded up */
1082 size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8)
1083 + 8;
1084
1085 /* Stopping point for hardware truncation */
1086 thresh = (size - 8) / sizeof(u32);
1087
1088 /* Account for overhead of skb - to avoid order > 0 allocation */
1089 space = SKB_DATA_ALIGN(size) + NET_SKB_PAD
1090 + sizeof(struct skb_shared_info);
1091
1092 sky2->rx_nfrags = space >> PAGE_SHIFT;
1093 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1094
1095 if (sky2->rx_nfrags != 0) {
1096 /* Compute residue after pages */
1097 space = sky2->rx_nfrags << PAGE_SHIFT;
1098
1099 if (space < size)
1100 size -= space;
1101 else
1102 size = 0;
1103
1104 /* Optimize to handle small packets and headers */
1105 if (size < copybreak)
1106 size = copybreak;
1107 if (size < ETH_HLEN)
1108 size = ETH_HLEN;
1109 }
1110 sky2->rx_data_size = size;
1111
1112 /* Fill Rx ring */
1113 for (i = 0; i < sky2->rx_pending; i++) {
1114 re = sky2->rx_ring + i;
1115
1116 re->skb = sky2_rx_alloc(sky2);
1117 if (!re->skb)
1118 goto nomem;
1119
1120 sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size);
1121 sky2_rx_submit(sky2, re);
1122 }
1123
1124 /*
1125 * The receiver hangs if it receives frames larger than the
1126 * packet buffer. As a workaround, truncate oversize frames, but
1127 * the register is limited to 9 bits, so if you do frames > 2052
1128 * you better get the MTU right!
1129 */
1130 if (thresh > 0x1ff)
1131 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1132 else {
1133 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1134 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1135 }
1136
1137 /* Tell chip about available buffers */
1138 sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
1139 return 0;
1140 nomem:
1141 sky2_rx_clean(sky2);
1142 return -ENOMEM;
1143 }
1144
1145 /* Bring up network interface. */
1146 static int sky2_up(struct net_device *dev)
1147 {
1148 struct sky2_port *sky2 = netdev_priv(dev);
1149 struct sky2_hw *hw = sky2->hw;
1150 unsigned port = sky2->port;
1151 u32 ramsize, imask;
1152 int cap, err = -ENOMEM;
1153 struct net_device *otherdev = hw->dev[sky2->port^1];
1154
1155 /*
1156 * On dual port PCI-X card, there is an problem where status
1157 * can be received out of order due to split transactions
1158 */
1159 if (otherdev && netif_running(otherdev) &&
1160 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1161 struct sky2_port *osky2 = netdev_priv(otherdev);
1162 u16 cmd;
1163
1164 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1165 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1166 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1167
1168 sky2->rx_csum = 0;
1169 osky2->rx_csum = 0;
1170 }
1171
1172 if (netif_msg_ifup(sky2))
1173 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
1174
1175 /* must be power of 2 */
1176 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1177 TX_RING_SIZE *
1178 sizeof(struct sky2_tx_le),
1179 &sky2->tx_le_map);
1180 if (!sky2->tx_le)
1181 goto err_out;
1182
1183 sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
1184 GFP_KERNEL);
1185 if (!sky2->tx_ring)
1186 goto err_out;
1187 sky2->tx_prod = sky2->tx_cons = 0;
1188
1189 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1190 &sky2->rx_le_map);
1191 if (!sky2->rx_le)
1192 goto err_out;
1193 memset(sky2->rx_le, 0, RX_LE_BYTES);
1194
1195 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1196 GFP_KERNEL);
1197 if (!sky2->rx_ring)
1198 goto err_out;
1199
1200 sky2_phy_power(hw, port, 1);
1201
1202 sky2_mac_init(hw, port);
1203
1204 /* Register is number of 4K blocks on internal RAM buffer. */
1205 ramsize = sky2_read8(hw, B2_E_0) * 4;
1206 printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize);
1207
1208 if (ramsize > 0) {
1209 u32 rxspace;
1210
1211 if (ramsize < 16)
1212 rxspace = ramsize / 2;
1213 else
1214 rxspace = 8 + (2*(ramsize - 16))/3;
1215
1216 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1217 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1218
1219 /* Make sure SyncQ is disabled */
1220 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1221 RB_RST_SET);
1222 }
1223
1224 sky2_qset(hw, txqaddr[port]);
1225
1226 /* Set almost empty threshold */
1227 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1228 && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1229 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
1230
1231 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1232 TX_RING_SIZE - 1);
1233
1234 err = sky2_rx_start(sky2);
1235 if (err)
1236 goto err_out;
1237
1238 /* Enable interrupts from phy/mac for port */
1239 imask = sky2_read32(hw, B0_IMSK);
1240 imask |= portirq_msk[port];
1241 sky2_write32(hw, B0_IMSK, imask);
1242
1243 return 0;
1244
1245 err_out:
1246 if (sky2->rx_le) {
1247 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1248 sky2->rx_le, sky2->rx_le_map);
1249 sky2->rx_le = NULL;
1250 }
1251 if (sky2->tx_le) {
1252 pci_free_consistent(hw->pdev,
1253 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1254 sky2->tx_le, sky2->tx_le_map);
1255 sky2->tx_le = NULL;
1256 }
1257 kfree(sky2->tx_ring);
1258 kfree(sky2->rx_ring);
1259
1260 sky2->tx_ring = NULL;
1261 sky2->rx_ring = NULL;
1262 return err;
1263 }
1264
1265 /* Modular subtraction in ring */
1266 static inline int tx_dist(unsigned tail, unsigned head)
1267 {
1268 return (head - tail) & (TX_RING_SIZE - 1);
1269 }
1270
1271 /* Number of list elements available for next tx */
1272 static inline int tx_avail(const struct sky2_port *sky2)
1273 {
1274 return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
1275 }
1276
1277 /* Estimate of number of transmit list elements required */
1278 static unsigned tx_le_req(const struct sk_buff *skb)
1279 {
1280 unsigned count;
1281
1282 count = sizeof(dma_addr_t) / sizeof(u32);
1283 count += skb_shinfo(skb)->nr_frags * count;
1284
1285 if (skb_is_gso(skb))
1286 ++count;
1287
1288 if (skb->ip_summed == CHECKSUM_PARTIAL)
1289 ++count;
1290
1291 return count;
1292 }
1293
1294 /*
1295 * Put one packet in ring for transmit.
1296 * A single packet can generate multiple list elements, and
1297 * the number of ring elements will probably be less than the number
1298 * of list elements used.
1299 */
1300 static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
1301 {
1302 struct sky2_port *sky2 = netdev_priv(dev);
1303 struct sky2_hw *hw = sky2->hw;
1304 struct sky2_tx_le *le = NULL;
1305 struct tx_ring_info *re;
1306 unsigned i, len;
1307 dma_addr_t mapping;
1308 u32 addr64;
1309 u16 mss;
1310 u8 ctrl;
1311
1312 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1313 return NETDEV_TX_BUSY;
1314
1315 if (unlikely(netif_msg_tx_queued(sky2)))
1316 printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
1317 dev->name, sky2->tx_prod, skb->len);
1318
1319 len = skb_headlen(skb);
1320 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1321 addr64 = high32(mapping);
1322
1323 /* Send high bits if changed or crosses boundary */
1324 if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
1325 le = get_tx_le(sky2);
1326 le->addr = cpu_to_le32(addr64);
1327 le->opcode = OP_ADDR64 | HW_OWNER;
1328 sky2->tx_addr64 = high32(mapping + len);
1329 }
1330
1331 /* Check for TCP Segmentation Offload */
1332 mss = skb_shinfo(skb)->gso_size;
1333 if (mss != 0) {
1334 mss += ((skb->h.th->doff - 5) * 4); /* TCP options */
1335 mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
1336 mss += ETH_HLEN;
1337
1338 if (mss != sky2->tx_last_mss) {
1339 le = get_tx_le(sky2);
1340 le->addr = cpu_to_le32(mss);
1341 le->opcode = OP_LRGLEN | HW_OWNER;
1342 sky2->tx_last_mss = mss;
1343 }
1344 }
1345
1346 ctrl = 0;
1347 #ifdef SKY2_VLAN_TAG_USED
1348 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1349 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1350 if (!le) {
1351 le = get_tx_le(sky2);
1352 le->addr = 0;
1353 le->opcode = OP_VLAN|HW_OWNER;
1354 } else
1355 le->opcode |= OP_VLAN;
1356 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1357 ctrl |= INS_VLAN;
1358 }
1359 #endif
1360
1361 /* Handle TCP checksum offload */
1362 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1363 unsigned offset = skb->h.raw - skb->data;
1364 u32 tcpsum;
1365
1366 tcpsum = offset << 16; /* sum start */
1367 tcpsum |= offset + skb->csum_offset; /* sum write */
1368
1369 ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1370 if (skb->nh.iph->protocol == IPPROTO_UDP)
1371 ctrl |= UDPTCP;
1372
1373 if (tcpsum != sky2->tx_tcpsum) {
1374 sky2->tx_tcpsum = tcpsum;
1375
1376 le = get_tx_le(sky2);
1377 le->addr = cpu_to_le32(tcpsum);
1378 le->length = 0; /* initial checksum value */
1379 le->ctrl = 1; /* one packet */
1380 le->opcode = OP_TCPLISW | HW_OWNER;
1381 }
1382 }
1383
1384 le = get_tx_le(sky2);
1385 le->addr = cpu_to_le32((u32) mapping);
1386 le->length = cpu_to_le16(len);
1387 le->ctrl = ctrl;
1388 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1389
1390 re = tx_le_re(sky2, le);
1391 re->skb = skb;
1392 pci_unmap_addr_set(re, mapaddr, mapping);
1393 pci_unmap_len_set(re, maplen, len);
1394
1395 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1396 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1397
1398 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1399 frag->size, PCI_DMA_TODEVICE);
1400 addr64 = high32(mapping);
1401 if (addr64 != sky2->tx_addr64) {
1402 le = get_tx_le(sky2);
1403 le->addr = cpu_to_le32(addr64);
1404 le->ctrl = 0;
1405 le->opcode = OP_ADDR64 | HW_OWNER;
1406 sky2->tx_addr64 = addr64;
1407 }
1408
1409 le = get_tx_le(sky2);
1410 le->addr = cpu_to_le32((u32) mapping);
1411 le->length = cpu_to_le16(frag->size);
1412 le->ctrl = ctrl;
1413 le->opcode = OP_BUFFER | HW_OWNER;
1414
1415 re = tx_le_re(sky2, le);
1416 re->skb = skb;
1417 pci_unmap_addr_set(re, mapaddr, mapping);
1418 pci_unmap_len_set(re, maplen, frag->size);
1419 }
1420
1421 le->ctrl |= EOP;
1422
1423 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1424 netif_stop_queue(dev);
1425
1426 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1427
1428 dev->trans_start = jiffies;
1429 return NETDEV_TX_OK;
1430 }
1431
1432 /*
1433 * Free ring elements from starting at tx_cons until "done"
1434 *
1435 * NB: the hardware will tell us about partial completion of multi-part
1436 * buffers so make sure not to free skb to early.
1437 */
1438 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1439 {
1440 struct net_device *dev = sky2->netdev;
1441 struct pci_dev *pdev = sky2->hw->pdev;
1442 unsigned idx;
1443
1444 BUG_ON(done >= TX_RING_SIZE);
1445
1446 for (idx = sky2->tx_cons; idx != done;
1447 idx = RING_NEXT(idx, TX_RING_SIZE)) {
1448 struct sky2_tx_le *le = sky2->tx_le + idx;
1449 struct tx_ring_info *re = sky2->tx_ring + idx;
1450
1451 switch(le->opcode & ~HW_OWNER) {
1452 case OP_LARGESEND:
1453 case OP_PACKET:
1454 pci_unmap_single(pdev,
1455 pci_unmap_addr(re, mapaddr),
1456 pci_unmap_len(re, maplen),
1457 PCI_DMA_TODEVICE);
1458 break;
1459 case OP_BUFFER:
1460 pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
1461 pci_unmap_len(re, maplen),
1462 PCI_DMA_TODEVICE);
1463 break;
1464 }
1465
1466 if (le->ctrl & EOP) {
1467 if (unlikely(netif_msg_tx_done(sky2)))
1468 printk(KERN_DEBUG "%s: tx done %u\n",
1469 dev->name, idx);
1470 dev_kfree_skb_any(re->skb);
1471 }
1472
1473 le->opcode = 0; /* paranoia */
1474 }
1475
1476 sky2->tx_cons = idx;
1477 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
1478 netif_wake_queue(dev);
1479 }
1480
1481 /* Cleanup all untransmitted buffers, assume transmitter not running */
1482 static void sky2_tx_clean(struct net_device *dev)
1483 {
1484 struct sky2_port *sky2 = netdev_priv(dev);
1485
1486 netif_tx_lock_bh(dev);
1487 sky2_tx_complete(sky2, sky2->tx_prod);
1488 netif_tx_unlock_bh(dev);
1489 }
1490
1491 /* Network shutdown */
1492 static int sky2_down(struct net_device *dev)
1493 {
1494 struct sky2_port *sky2 = netdev_priv(dev);
1495 struct sky2_hw *hw = sky2->hw;
1496 unsigned port = sky2->port;
1497 u16 ctrl;
1498 u32 imask;
1499
1500 /* Never really got started! */
1501 if (!sky2->tx_le)
1502 return 0;
1503
1504 if (netif_msg_ifdown(sky2))
1505 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
1506
1507 /* Stop more packets from being queued */
1508 netif_stop_queue(dev);
1509 netif_carrier_off(dev);
1510
1511 /* Disable port IRQ */
1512 imask = sky2_read32(hw, B0_IMSK);
1513 imask &= ~portirq_msk[port];
1514 sky2_write32(hw, B0_IMSK, imask);
1515
1516 /*
1517 * Both ports share the NAPI poll on port 0, so if necessary undo the
1518 * the disable that is done in dev_close.
1519 */
1520 if (sky2->port == 0 && hw->ports > 1)
1521 netif_poll_enable(dev);
1522
1523 sky2_gmac_reset(hw, port);
1524
1525 /* Stop transmitter */
1526 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1527 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1528
1529 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1530 RB_RST_SET | RB_DIS_OP_MD);
1531
1532 /* WA for dev. #4.209 */
1533 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1534 && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1535 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1536 sky2->speed != SPEED_1000 ?
1537 TX_STFW_ENA : TX_STFW_DIS);
1538
1539 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1540 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1541 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1542
1543 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1544
1545 /* Workaround shared GMAC reset */
1546 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
1547 && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1548 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1549
1550 /* Disable Force Sync bit and Enable Alloc bit */
1551 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1552 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1553
1554 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1555 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1556 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1557
1558 /* Reset the PCI FIFO of the async Tx queue */
1559 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1560 BMU_RST_SET | BMU_FIFO_RST);
1561
1562 /* Reset the Tx prefetch units */
1563 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1564 PREF_UNIT_RST_SET);
1565
1566 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1567
1568 sky2_rx_stop(sky2);
1569
1570 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1571 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1572
1573 sky2_phy_power(hw, port, 0);
1574
1575 /* turn off LED's */
1576 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
1577
1578 synchronize_irq(hw->pdev->irq);
1579
1580 sky2_tx_clean(dev);
1581 sky2_rx_clean(sky2);
1582
1583 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1584 sky2->rx_le, sky2->rx_le_map);
1585 kfree(sky2->rx_ring);
1586
1587 pci_free_consistent(hw->pdev,
1588 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1589 sky2->tx_le, sky2->tx_le_map);
1590 kfree(sky2->tx_ring);
1591
1592 sky2->tx_le = NULL;
1593 sky2->rx_le = NULL;
1594
1595 sky2->rx_ring = NULL;
1596 sky2->tx_ring = NULL;
1597
1598 return 0;
1599 }
1600
1601 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
1602 {
1603 if (!sky2_is_copper(hw))
1604 return SPEED_1000;
1605
1606 if (hw->chip_id == CHIP_ID_YUKON_FE)
1607 return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
1608
1609 switch (aux & PHY_M_PS_SPEED_MSK) {
1610 case PHY_M_PS_SPEED_1000:
1611 return SPEED_1000;
1612 case PHY_M_PS_SPEED_100:
1613 return SPEED_100;
1614 default:
1615 return SPEED_10;
1616 }
1617 }
1618
1619 static void sky2_link_up(struct sky2_port *sky2)
1620 {
1621 struct sky2_hw *hw = sky2->hw;
1622 unsigned port = sky2->port;
1623 u16 reg;
1624 static const char *fc_name[] = {
1625 [FC_NONE] = "none",
1626 [FC_TX] = "tx",
1627 [FC_RX] = "rx",
1628 [FC_BOTH] = "both",
1629 };
1630
1631 /* enable Rx/Tx */
1632 reg = gma_read16(hw, port, GM_GP_CTRL);
1633 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
1634 gma_write16(hw, port, GM_GP_CTRL, reg);
1635
1636 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
1637
1638 netif_carrier_on(sky2->netdev);
1639 netif_wake_queue(sky2->netdev);
1640
1641 /* Turn on link LED */
1642 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
1643 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
1644
1645 if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
1646 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
1647 u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
1648
1649 switch(sky2->speed) {
1650 case SPEED_10:
1651 led |= PHY_M_LEDC_INIT_CTRL(7);
1652 break;
1653
1654 case SPEED_100:
1655 led |= PHY_M_LEDC_STA1_CTRL(7);
1656 break;
1657
1658 case SPEED_1000:
1659 led |= PHY_M_LEDC_STA0_CTRL(7);
1660 break;
1661 }
1662
1663 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
1664 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
1665 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
1666 }
1667
1668 if (netif_msg_link(sky2))
1669 printk(KERN_INFO PFX
1670 "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
1671 sky2->netdev->name, sky2->speed,
1672 sky2->duplex == DUPLEX_FULL ? "full" : "half",
1673 fc_name[sky2->flow_status]);
1674 }
1675
1676 static void sky2_link_down(struct sky2_port *sky2)
1677 {
1678 struct sky2_hw *hw = sky2->hw;
1679 unsigned port = sky2->port;
1680 u16 reg;
1681
1682 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
1683
1684 reg = gma_read16(hw, port, GM_GP_CTRL);
1685 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
1686 gma_write16(hw, port, GM_GP_CTRL, reg);
1687
1688 if (sky2->flow_status == FC_RX) {
1689 /* restore Asymmetric Pause bit */
1690 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
1691 gm_phy_read(hw, port, PHY_MARV_AUNE_ADV)
1692 | PHY_M_AN_ASP);
1693 }
1694
1695 netif_carrier_off(sky2->netdev);
1696 netif_stop_queue(sky2->netdev);
1697
1698 /* Turn on link LED */
1699 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
1700
1701 if (netif_msg_link(sky2))
1702 printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
1703
1704 sky2_phy_init(hw, port);
1705 }
1706
1707 static enum flow_control sky2_flow(int rx, int tx)
1708 {
1709 if (rx)
1710 return tx ? FC_BOTH : FC_RX;
1711 else
1712 return tx ? FC_TX : FC_NONE;
1713 }
1714
1715 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
1716 {
1717 struct sky2_hw *hw = sky2->hw;
1718 unsigned port = sky2->port;
1719 u16 lpa;
1720
1721 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
1722
1723 if (lpa & PHY_M_AN_RF) {
1724 printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
1725 return -1;
1726 }
1727
1728 if (!(aux & PHY_M_PS_SPDUP_RES)) {
1729 printk(KERN_ERR PFX "%s: speed/duplex mismatch",
1730 sky2->netdev->name);
1731 return -1;
1732 }
1733
1734 sky2->speed = sky2_phy_speed(hw, aux);
1735 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1736
1737 /* Pause bits are offset (9..8) */
1738 if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
1739 aux >>= 6;
1740
1741 sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN,
1742 aux & PHY_M_PS_TX_P_EN);
1743
1744 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
1745 && hw->chip_id != CHIP_ID_YUKON_EC_U)
1746 sky2->flow_status = FC_NONE;
1747
1748 if (aux & PHY_M_PS_RX_P_EN)
1749 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
1750 else
1751 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1752
1753 return 0;
1754 }
1755
1756 /* Interrupt from PHY */
1757 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
1758 {
1759 struct net_device *dev = hw->dev[port];
1760 struct sky2_port *sky2 = netdev_priv(dev);
1761 u16 istatus, phystat;
1762
1763 if (!netif_running(dev))
1764 return;
1765
1766 spin_lock(&sky2->phy_lock);
1767 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
1768 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
1769
1770 if (netif_msg_intr(sky2))
1771 printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
1772 sky2->netdev->name, istatus, phystat);
1773
1774 if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
1775 if (sky2_autoneg_done(sky2, phystat) == 0)
1776 sky2_link_up(sky2);
1777 goto out;
1778 }
1779
1780 if (istatus & PHY_M_IS_LSP_CHANGE)
1781 sky2->speed = sky2_phy_speed(hw, phystat);
1782
1783 if (istatus & PHY_M_IS_DUP_CHANGE)
1784 sky2->duplex =
1785 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1786
1787 if (istatus & PHY_M_IS_LST_CHANGE) {
1788 if (phystat & PHY_M_PS_LINK_UP)
1789 sky2_link_up(sky2);
1790 else
1791 sky2_link_down(sky2);
1792 }
1793 out:
1794 spin_unlock(&sky2->phy_lock);
1795 }
1796
1797
1798 /* Transmit timeout is only called if we are running, carries is up
1799 * and tx queue is full (stopped).
1800 * Called with netif_tx_lock held.
1801 */
1802 static void sky2_tx_timeout(struct net_device *dev)
1803 {
1804 struct sky2_port *sky2 = netdev_priv(dev);
1805 struct sky2_hw *hw = sky2->hw;
1806 unsigned port = sky2->port;
1807
1808 if (netif_msg_timer(sky2))
1809 printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
1810
1811 /* Get information for bug report :-) */
1812 printk(KERN_INFO PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
1813 dev->name, sky2->tx_cons, sky2->tx_prod,
1814 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
1815 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
1816
1817 printk(KERN_INFO PFX "gmac control %#x status %#x\n",
1818 gma_read16(hw, port, GM_GP_CTRL), gma_read16(hw, port, GM_GP_STAT));
1819
1820 /* can't restart safely under softirq */
1821 schedule_work(&hw->restart_work);
1822 }
1823
1824 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
1825 {
1826 struct sky2_port *sky2 = netdev_priv(dev);
1827 struct sky2_hw *hw = sky2->hw;
1828 int err;
1829 u16 ctl, mode;
1830 u32 imask;
1831
1832 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
1833 return -EINVAL;
1834
1835 if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
1836 return -EINVAL;
1837
1838 if (!netif_running(dev)) {
1839 dev->mtu = new_mtu;
1840 return 0;
1841 }
1842
1843 imask = sky2_read32(hw, B0_IMSK);
1844 sky2_write32(hw, B0_IMSK, 0);
1845
1846 dev->trans_start = jiffies; /* prevent tx timeout */
1847 netif_stop_queue(dev);
1848 netif_poll_disable(hw->dev[0]);
1849
1850 synchronize_irq(hw->pdev->irq);
1851
1852 ctl = gma_read16(hw, sky2->port, GM_GP_CTRL);
1853 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
1854 sky2_rx_stop(sky2);
1855 sky2_rx_clean(sky2);
1856
1857 dev->mtu = new_mtu;
1858
1859 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
1860 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
1861
1862 if (dev->mtu > ETH_DATA_LEN)
1863 mode |= GM_SMOD_JUMBO_ENA;
1864
1865 gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode);
1866
1867 sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD);
1868
1869 err = sky2_rx_start(sky2);
1870 sky2_write32(hw, B0_IMSK, imask);
1871
1872 if (err)
1873 dev_close(dev);
1874 else {
1875 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl);
1876
1877 netif_poll_enable(hw->dev[0]);
1878 netif_wake_queue(dev);
1879 }
1880
1881 return err;
1882 }
1883
1884 /* For small just reuse existing skb for next receive */
1885 static struct sk_buff *receive_copy(struct sky2_port *sky2,
1886 const struct rx_ring_info *re,
1887 unsigned length)
1888 {
1889 struct sk_buff *skb;
1890
1891 skb = netdev_alloc_skb(sky2->netdev, length + 2);
1892 if (likely(skb)) {
1893 skb_reserve(skb, 2);
1894 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
1895 length, PCI_DMA_FROMDEVICE);
1896 memcpy(skb->data, re->skb->data, length);
1897 skb->ip_summed = re->skb->ip_summed;
1898 skb->csum = re->skb->csum;
1899 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
1900 length, PCI_DMA_FROMDEVICE);
1901 re->skb->ip_summed = CHECKSUM_NONE;
1902 skb_put(skb, length);
1903 }
1904 return skb;
1905 }
1906
1907 /* Adjust length of skb with fragments to match received data */
1908 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
1909 unsigned int length)
1910 {
1911 int i, num_frags;
1912 unsigned int size;
1913
1914 /* put header into skb */
1915 size = min(length, hdr_space);
1916 skb->tail += size;
1917 skb->len += size;
1918 length -= size;
1919
1920 num_frags = skb_shinfo(skb)->nr_frags;
1921 for (i = 0; i < num_frags; i++) {
1922 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1923
1924 if (length == 0) {
1925 /* don't need this page */
1926 __free_page(frag->page);
1927 --skb_shinfo(skb)->nr_frags;
1928 } else {
1929 size = min(length, (unsigned) PAGE_SIZE);
1930
1931 frag->size = size;
1932 skb->data_len += size;
1933 skb->truesize += size;
1934 skb->len += size;
1935 length -= size;
1936 }
1937 }
1938 }
1939
1940 /* Normal packet - take skb from ring element and put in a new one */
1941 static struct sk_buff *receive_new(struct sky2_port *sky2,
1942 struct rx_ring_info *re,
1943 unsigned int length)
1944 {
1945 struct sk_buff *skb, *nskb;
1946 unsigned hdr_space = sky2->rx_data_size;
1947
1948 pr_debug(PFX "receive new length=%d\n", length);
1949
1950 /* Don't be tricky about reusing pages (yet) */
1951 nskb = sky2_rx_alloc(sky2);
1952 if (unlikely(!nskb))
1953 return NULL;
1954
1955 skb = re->skb;
1956 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1957
1958 prefetch(skb->data);
1959 re->skb = nskb;
1960 sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space);
1961
1962 if (skb_shinfo(skb)->nr_frags)
1963 skb_put_frags(skb, hdr_space, length);
1964 else
1965 skb_put(skb, length);
1966 return skb;
1967 }
1968
1969 /*
1970 * Receive one packet.
1971 * For larger packets, get new buffer.
1972 */
1973 static struct sk_buff *sky2_receive(struct net_device *dev,
1974 u16 length, u32 status)
1975 {
1976 struct sky2_port *sky2 = netdev_priv(dev);
1977 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
1978 struct sk_buff *skb = NULL;
1979
1980 if (unlikely(netif_msg_rx_status(sky2)))
1981 printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
1982 dev->name, sky2->rx_next, status, length);
1983
1984 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
1985 prefetch(sky2->rx_ring + sky2->rx_next);
1986
1987 if (status & GMR_FS_ANY_ERR)
1988 goto error;
1989
1990 if (!(status & GMR_FS_RX_OK))
1991 goto resubmit;
1992
1993 if (length > dev->mtu + ETH_HLEN)
1994 goto oversize;
1995
1996 if (length < copybreak)
1997 skb = receive_copy(sky2, re, length);
1998 else
1999 skb = receive_new(sky2, re, length);
2000 resubmit:
2001 sky2_rx_submit(sky2, re);
2002
2003 return skb;
2004
2005 oversize:
2006 ++sky2->net_stats.rx_over_errors;
2007 goto resubmit;
2008
2009 error:
2010 ++sky2->net_stats.rx_errors;
2011 if (status & GMR_FS_RX_FF_OV) {
2012 sky2->net_stats.rx_fifo_errors++;
2013 goto resubmit;
2014 }
2015
2016 if (netif_msg_rx_err(sky2) && net_ratelimit())
2017 printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
2018 dev->name, status, length);
2019
2020 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
2021 sky2->net_stats.rx_length_errors++;
2022 if (status & GMR_FS_FRAGMENT)
2023 sky2->net_stats.rx_frame_errors++;
2024 if (status & GMR_FS_CRC_ERR)
2025 sky2->net_stats.rx_crc_errors++;
2026
2027 goto resubmit;
2028 }
2029
2030 /* Transmit complete */
2031 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2032 {
2033 struct sky2_port *sky2 = netdev_priv(dev);
2034
2035 if (netif_running(dev)) {
2036 netif_tx_lock(dev);
2037 sky2_tx_complete(sky2, last);
2038 netif_tx_unlock(dev);
2039 }
2040 }
2041
2042 /* Process status response ring */
2043 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
2044 {
2045 struct sky2_port *sky2;
2046 int work_done = 0;
2047 unsigned buf_write[2] = { 0, 0 };
2048 u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
2049
2050 rmb();
2051
2052 while (hw->st_idx != hwidx) {
2053 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2054 struct net_device *dev;
2055 struct sk_buff *skb;
2056 u32 status;
2057 u16 length;
2058
2059 hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
2060
2061 BUG_ON(le->link >= 2);
2062 dev = hw->dev[le->link];
2063
2064 sky2 = netdev_priv(dev);
2065 length = le16_to_cpu(le->length);
2066 status = le32_to_cpu(le->status);
2067
2068 switch (le->opcode & ~HW_OWNER) {
2069 case OP_RXSTAT:
2070 skb = sky2_receive(dev, length, status);
2071 if (!skb)
2072 goto force_update;
2073
2074 skb->protocol = eth_type_trans(skb, dev);
2075 dev->last_rx = jiffies;
2076
2077 #ifdef SKY2_VLAN_TAG_USED
2078 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
2079 vlan_hwaccel_receive_skb(skb,
2080 sky2->vlgrp,
2081 be16_to_cpu(sky2->rx_tag));
2082 } else
2083 #endif
2084 netif_receive_skb(skb);
2085
2086 /* Update receiver after 16 frames */
2087 if (++buf_write[le->link] == RX_BUF_WRITE) {
2088 force_update:
2089 sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put);
2090 buf_write[le->link] = 0;
2091 }
2092
2093 /* Stop after net poll weight */
2094 if (++work_done >= to_do)
2095 goto exit_loop;
2096 break;
2097
2098 #ifdef SKY2_VLAN_TAG_USED
2099 case OP_RXVLAN:
2100 sky2->rx_tag = length;
2101 break;
2102
2103 case OP_RXCHKSVLAN:
2104 sky2->rx_tag = length;
2105 /* fall through */
2106 #endif
2107 case OP_RXCHKS:
2108 skb = sky2->rx_ring[sky2->rx_next].skb;
2109 skb->ip_summed = CHECKSUM_COMPLETE;
2110 skb->csum = status & 0xffff;
2111 break;
2112
2113 case OP_TXINDEXLE:
2114 /* TX index reports status for both ports */
2115 BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
2116 sky2_tx_done(hw->dev[0], status & 0xfff);
2117 if (hw->dev[1])
2118 sky2_tx_done(hw->dev[1],
2119 ((status >> 24) & 0xff)
2120 | (u16)(length & 0xf) << 8);
2121 break;
2122
2123 default:
2124 if (net_ratelimit())
2125 printk(KERN_WARNING PFX
2126 "unknown status opcode 0x%x\n", le->opcode);
2127 goto exit_loop;
2128 }
2129 }
2130
2131 /* Fully processed status ring so clear irq */
2132 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2133
2134 exit_loop:
2135 if (buf_write[0]) {
2136 sky2 = netdev_priv(hw->dev[0]);
2137 sky2_put_idx(hw, Q_R1, sky2->rx_put);
2138 }
2139
2140 if (buf_write[1]) {
2141 sky2 = netdev_priv(hw->dev[1]);
2142 sky2_put_idx(hw, Q_R2, sky2->rx_put);
2143 }
2144
2145 return work_done;
2146 }
2147
2148 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2149 {
2150 struct net_device *dev = hw->dev[port];
2151
2152 if (net_ratelimit())
2153 printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
2154 dev->name, status);
2155
2156 if (status & Y2_IS_PAR_RD1) {
2157 if (net_ratelimit())
2158 printk(KERN_ERR PFX "%s: ram data read parity error\n",
2159 dev->name);
2160 /* Clear IRQ */
2161 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2162 }
2163
2164 if (status & Y2_IS_PAR_WR1) {
2165 if (net_ratelimit())
2166 printk(KERN_ERR PFX "%s: ram data write parity error\n",
2167 dev->name);
2168
2169 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2170 }
2171
2172 if (status & Y2_IS_PAR_MAC1) {
2173 if (net_ratelimit())
2174 printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
2175 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2176 }
2177
2178 if (status & Y2_IS_PAR_RX1) {
2179 if (net_ratelimit())
2180 printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
2181 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2182 }
2183
2184 if (status & Y2_IS_TCP_TXA1) {
2185 if (net_ratelimit())
2186 printk(KERN_ERR PFX "%s: TCP segmentation error\n",
2187 dev->name);
2188 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2189 }
2190 }
2191
2192 static void sky2_hw_intr(struct sky2_hw *hw)
2193 {
2194 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2195
2196 if (status & Y2_IS_TIST_OV)
2197 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2198
2199 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2200 u16 pci_err;
2201
2202 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2203 if (net_ratelimit())
2204 printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
2205 pci_name(hw->pdev), pci_err);
2206
2207 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2208 sky2_pci_write16(hw, PCI_STATUS,
2209 pci_err | PCI_STATUS_ERROR_BITS);
2210 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2211 }
2212
2213 if (status & Y2_IS_PCI_EXP) {
2214 /* PCI-Express uncorrectable Error occurred */
2215 u32 pex_err;
2216
2217 pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
2218
2219 if (net_ratelimit())
2220 printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
2221 pci_name(hw->pdev), pex_err);
2222
2223 /* clear the interrupt */
2224 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2225 sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
2226 0xffffffffUL);
2227 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2228
2229 if (pex_err & PEX_FATAL_ERRORS) {
2230 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2231 hwmsk &= ~Y2_IS_PCI_EXP;
2232 sky2_write32(hw, B0_HWE_IMSK, hwmsk);
2233 }
2234 }
2235
2236 if (status & Y2_HWE_L1_MASK)
2237 sky2_hw_error(hw, 0, status);
2238 status >>= 8;
2239 if (status & Y2_HWE_L1_MASK)
2240 sky2_hw_error(hw, 1, status);
2241 }
2242
2243 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2244 {
2245 struct net_device *dev = hw->dev[port];
2246 struct sky2_port *sky2 = netdev_priv(dev);
2247 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2248
2249 if (netif_msg_intr(sky2))
2250 printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
2251 dev->name, status);
2252
2253 if (status & GM_IS_RX_FF_OR) {
2254 ++sky2->net_stats.rx_fifo_errors;
2255 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2256 }
2257
2258 if (status & GM_IS_TX_FF_UR) {
2259 ++sky2->net_stats.tx_fifo_errors;
2260 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2261 }
2262 }
2263
2264 /* This should never happen it is a fatal situation */
2265 static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
2266 const char *rxtx, u32 mask)
2267 {
2268 struct net_device *dev = hw->dev[port];
2269 struct sky2_port *sky2 = netdev_priv(dev);
2270 u32 imask;
2271
2272 printk(KERN_ERR PFX "%s: %s descriptor error (hardware problem)\n",
2273 dev ? dev->name : "<not registered>", rxtx);
2274
2275 imask = sky2_read32(hw, B0_IMSK);
2276 imask &= ~mask;
2277 sky2_write32(hw, B0_IMSK, imask);
2278
2279 if (dev) {
2280 spin_lock(&sky2->phy_lock);
2281 sky2_link_down(sky2);
2282 spin_unlock(&sky2->phy_lock);
2283 }
2284 }
2285
2286 /* If idle then force a fake soft NAPI poll once a second
2287 * to work around cases where sharing an edge triggered interrupt.
2288 */
2289 static inline void sky2_idle_start(struct sky2_hw *hw)
2290 {
2291 if (idle_timeout > 0)
2292 mod_timer(&hw->idle_timer,
2293 jiffies + msecs_to_jiffies(idle_timeout));
2294 }
2295
2296 static void sky2_idle(unsigned long arg)
2297 {
2298 struct sky2_hw *hw = (struct sky2_hw *) arg;
2299 struct net_device *dev = hw->dev[0];
2300
2301 if (__netif_rx_schedule_prep(dev))
2302 __netif_rx_schedule(dev);
2303
2304 mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
2305 }
2306
2307
2308 static int sky2_poll(struct net_device *dev0, int *budget)
2309 {
2310 struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
2311 int work_limit = min(dev0->quota, *budget);
2312 int work_done = 0;
2313 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2314
2315 if (status & Y2_IS_HW_ERR)
2316 sky2_hw_intr(hw);
2317
2318 if (status & Y2_IS_IRQ_PHY1)
2319 sky2_phy_intr(hw, 0);
2320
2321 if (status & Y2_IS_IRQ_PHY2)
2322 sky2_phy_intr(hw, 1);
2323
2324 if (status & Y2_IS_IRQ_MAC1)
2325 sky2_mac_intr(hw, 0);
2326
2327 if (status & Y2_IS_IRQ_MAC2)
2328 sky2_mac_intr(hw, 1);
2329
2330 if (status & Y2_IS_CHK_RX1)
2331 sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
2332
2333 if (status & Y2_IS_CHK_RX2)
2334 sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
2335
2336 if (status & Y2_IS_CHK_TXA1)
2337 sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
2338
2339 if (status & Y2_IS_CHK_TXA2)
2340 sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
2341
2342 work_done = sky2_status_intr(hw, work_limit);
2343 if (work_done < work_limit) {
2344 netif_rx_complete(dev0);
2345
2346 sky2_read32(hw, B0_Y2_SP_LISR);
2347 return 0;
2348 } else {
2349 *budget -= work_done;
2350 dev0->quota -= work_done;
2351 return 1;
2352 }
2353 }
2354
2355 static irqreturn_t sky2_intr(int irq, void *dev_id)
2356 {
2357 struct sky2_hw *hw = dev_id;
2358 struct net_device *dev0 = hw->dev[0];
2359 u32 status;
2360
2361 /* Reading this mask interrupts as side effect */
2362 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2363 if (status == 0 || status == ~0)
2364 return IRQ_NONE;
2365
2366 prefetch(&hw->st_le[hw->st_idx]);
2367 if (likely(__netif_rx_schedule_prep(dev0)))
2368 __netif_rx_schedule(dev0);
2369
2370 return IRQ_HANDLED;
2371 }
2372
2373 #ifdef CONFIG_NET_POLL_CONTROLLER
2374 static void sky2_netpoll(struct net_device *dev)
2375 {
2376 struct sky2_port *sky2 = netdev_priv(dev);
2377 struct net_device *dev0 = sky2->hw->dev[0];
2378
2379 if (netif_running(dev) && __netif_rx_schedule_prep(dev0))
2380 __netif_rx_schedule(dev0);
2381 }
2382 #endif
2383
2384 /* Chip internal frequency for clock calculations */
2385 static inline u32 sky2_mhz(const struct sky2_hw *hw)
2386 {
2387 switch (hw->chip_id) {
2388 case CHIP_ID_YUKON_EC:
2389 case CHIP_ID_YUKON_EC_U:
2390 return 125; /* 125 Mhz */
2391 case CHIP_ID_YUKON_FE:
2392 return 100; /* 100 Mhz */
2393 default: /* YUKON_XL */
2394 return 156; /* 156 Mhz */
2395 }
2396 }
2397
2398 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2399 {
2400 return sky2_mhz(hw) * us;
2401 }
2402
2403 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
2404 {
2405 return clk / sky2_mhz(hw);
2406 }
2407
2408
2409 static int sky2_reset(struct sky2_hw *hw)
2410 {
2411 u16 status;
2412 u8 t8;
2413 int i;
2414
2415 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2416
2417 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
2418 if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
2419 printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
2420 pci_name(hw->pdev), hw->chip_id);
2421 return -EOPNOTSUPP;
2422 }
2423
2424 /* Make sure and enable all clocks */
2425 if (hw->chip_id == CHIP_ID_YUKON_EC_U)
2426 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
2427
2428 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
2429
2430 /* This rev is really old, and requires untested workarounds */
2431 if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
2432 printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n",
2433 pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
2434 hw->chip_id, hw->chip_rev);
2435 return -EOPNOTSUPP;
2436 }
2437
2438 /* disable ASF */
2439 if (hw->chip_id <= CHIP_ID_YUKON_EC) {
2440 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
2441 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
2442 }
2443
2444 /* do a SW reset */
2445 sky2_write8(hw, B0_CTST, CS_RST_SET);
2446 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2447
2448 /* clear PCI errors, if any */
2449 status = sky2_pci_read16(hw, PCI_STATUS);
2450
2451 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2452 sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
2453
2454
2455 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
2456
2457 /* clear any PEX errors */
2458 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
2459 sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
2460
2461
2462 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
2463 hw->ports = 1;
2464 t8 = sky2_read8(hw, B2_Y2_HW_RES);
2465 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
2466 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
2467 ++hw->ports;
2468 }
2469
2470 sky2_set_power_state(hw, PCI_D0);
2471
2472 for (i = 0; i < hw->ports; i++) {
2473 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
2474 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
2475 }
2476
2477 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2478
2479 /* Clear I2C IRQ noise */
2480 sky2_write32(hw, B2_I2C_IRQ, 1);
2481
2482 /* turn off hardware timer (unused) */
2483 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
2484 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
2485
2486 sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
2487
2488 /* Turn off descriptor polling */
2489 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
2490
2491 /* Turn off receive timestamp */
2492 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
2493 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2494
2495 /* enable the Tx Arbiters */
2496 for (i = 0; i < hw->ports; i++)
2497 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
2498
2499 /* Initialize ram interface */
2500 for (i = 0; i < hw->ports; i++) {
2501 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
2502
2503 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
2504 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
2505 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
2506 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
2507 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
2508 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
2509 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
2510 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
2511 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
2512 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
2513 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
2514 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
2515 }
2516
2517 sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
2518
2519 for (i = 0; i < hw->ports; i++)
2520 sky2_gmac_reset(hw, i);
2521
2522 memset(hw->st_le, 0, STATUS_LE_BYTES);
2523 hw->st_idx = 0;
2524
2525 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
2526 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
2527
2528 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
2529 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
2530
2531 /* Set the list last index */
2532 sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
2533
2534 sky2_write16(hw, STAT_TX_IDX_TH, 10);
2535 sky2_write8(hw, STAT_FIFO_WM, 16);
2536
2537 /* set Status-FIFO ISR watermark */
2538 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
2539 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
2540 else
2541 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
2542
2543 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
2544 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
2545 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
2546
2547 /* enable status unit */
2548 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
2549
2550 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2551 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2552 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2553
2554 return 0;
2555 }
2556
2557 static void sky2_restart(struct work_struct *work)
2558 {
2559 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
2560 struct net_device *dev;
2561 int i, err;
2562
2563 dev_dbg(&hw->pdev->dev, "restarting\n");
2564
2565 del_timer_sync(&hw->idle_timer);
2566
2567 rtnl_lock();
2568 sky2_write32(hw, B0_IMSK, 0);
2569 sky2_read32(hw, B0_IMSK);
2570
2571 netif_poll_disable(hw->dev[0]);
2572
2573 for (i = 0; i < hw->ports; i++) {
2574 dev = hw->dev[i];
2575 if (netif_running(dev))
2576 sky2_down(dev);
2577 }
2578
2579 sky2_reset(hw);
2580 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
2581 netif_poll_enable(hw->dev[0]);
2582
2583 for (i = 0; i < hw->ports; i++) {
2584 dev = hw->dev[i];
2585 if (netif_running(dev)) {
2586 err = sky2_up(dev);
2587 if (err) {
2588 printk(KERN_INFO PFX "%s: could not restart %d\n",
2589 dev->name, err);
2590 dev_close(dev);
2591 }
2592 }
2593 }
2594
2595 sky2_idle_start(hw);
2596
2597 rtnl_unlock();
2598 }
2599
2600 static u32 sky2_supported_modes(const struct sky2_hw *hw)
2601 {
2602 if (sky2_is_copper(hw)) {
2603 u32 modes = SUPPORTED_10baseT_Half
2604 | SUPPORTED_10baseT_Full
2605 | SUPPORTED_100baseT_Half
2606 | SUPPORTED_100baseT_Full
2607 | SUPPORTED_Autoneg | SUPPORTED_TP;
2608
2609 if (hw->chip_id != CHIP_ID_YUKON_FE)
2610 modes |= SUPPORTED_1000baseT_Half
2611 | SUPPORTED_1000baseT_Full;
2612 return modes;
2613 } else
2614 return SUPPORTED_1000baseT_Half
2615 | SUPPORTED_1000baseT_Full
2616 | SUPPORTED_Autoneg
2617 | SUPPORTED_FIBRE;
2618 }
2619
2620 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2621 {
2622 struct sky2_port *sky2 = netdev_priv(dev);
2623 struct sky2_hw *hw = sky2->hw;
2624
2625 ecmd->transceiver = XCVR_INTERNAL;
2626 ecmd->supported = sky2_supported_modes(hw);
2627 ecmd->phy_address = PHY_ADDR_MARV;
2628 if (sky2_is_copper(hw)) {
2629 ecmd->supported = SUPPORTED_10baseT_Half
2630 | SUPPORTED_10baseT_Full
2631 | SUPPORTED_100baseT_Half
2632 | SUPPORTED_100baseT_Full
2633 | SUPPORTED_1000baseT_Half
2634 | SUPPORTED_1000baseT_Full
2635 | SUPPORTED_Autoneg | SUPPORTED_TP;
2636 ecmd->port = PORT_TP;
2637 ecmd->speed = sky2->speed;
2638 } else {
2639 ecmd->speed = SPEED_1000;
2640 ecmd->port = PORT_FIBRE;
2641 }
2642
2643 ecmd->advertising = sky2->advertising;
2644 ecmd->autoneg = sky2->autoneg;
2645 ecmd->duplex = sky2->duplex;
2646 return 0;
2647 }
2648
2649 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2650 {
2651 struct sky2_port *sky2 = netdev_priv(dev);
2652 const struct sky2_hw *hw = sky2->hw;
2653 u32 supported = sky2_supported_modes(hw);
2654
2655 if (ecmd->autoneg == AUTONEG_ENABLE) {
2656 ecmd->advertising = supported;
2657 sky2->duplex = -1;
2658 sky2->speed = -1;
2659 } else {
2660 u32 setting;
2661
2662 switch (ecmd->speed) {
2663 case SPEED_1000:
2664 if (ecmd->duplex == DUPLEX_FULL)
2665 setting = SUPPORTED_1000baseT_Full;
2666 else if (ecmd->duplex == DUPLEX_HALF)
2667 setting = SUPPORTED_1000baseT_Half;
2668 else
2669 return -EINVAL;
2670 break;
2671 case SPEED_100:
2672 if (ecmd->duplex == DUPLEX_FULL)
2673 setting = SUPPORTED_100baseT_Full;
2674 else if (ecmd->duplex == DUPLEX_HALF)
2675 setting = SUPPORTED_100baseT_Half;
2676 else
2677 return -EINVAL;
2678 break;
2679
2680 case SPEED_10:
2681 if (ecmd->duplex == DUPLEX_FULL)
2682 setting = SUPPORTED_10baseT_Full;
2683 else if (ecmd->duplex == DUPLEX_HALF)
2684 setting = SUPPORTED_10baseT_Half;
2685 else
2686 return -EINVAL;
2687 break;
2688 default:
2689 return -EINVAL;
2690 }
2691
2692 if ((setting & supported) == 0)
2693 return -EINVAL;
2694
2695 sky2->speed = ecmd->speed;
2696 sky2->duplex = ecmd->duplex;
2697 }
2698
2699 sky2->autoneg = ecmd->autoneg;
2700 sky2->advertising = ecmd->advertising;
2701
2702 if (netif_running(dev))
2703 sky2_phy_reinit(sky2);
2704
2705 return 0;
2706 }
2707
2708 static void sky2_get_drvinfo(struct net_device *dev,
2709 struct ethtool_drvinfo *info)
2710 {
2711 struct sky2_port *sky2 = netdev_priv(dev);
2712
2713 strcpy(info->driver, DRV_NAME);
2714 strcpy(info->version, DRV_VERSION);
2715 strcpy(info->fw_version, "N/A");
2716 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
2717 }
2718
2719 static const struct sky2_stat {
2720 char name[ETH_GSTRING_LEN];
2721 u16 offset;
2722 } sky2_stats[] = {
2723 { "tx_bytes", GM_TXO_OK_HI },
2724 { "rx_bytes", GM_RXO_OK_HI },
2725 { "tx_broadcast", GM_TXF_BC_OK },
2726 { "rx_broadcast", GM_RXF_BC_OK },
2727 { "tx_multicast", GM_TXF_MC_OK },
2728 { "rx_multicast", GM_RXF_MC_OK },
2729 { "tx_unicast", GM_TXF_UC_OK },
2730 { "rx_unicast", GM_RXF_UC_OK },
2731 { "tx_mac_pause", GM_TXF_MPAUSE },
2732 { "rx_mac_pause", GM_RXF_MPAUSE },
2733 { "collisions", GM_TXF_COL },
2734 { "late_collision",GM_TXF_LAT_COL },
2735 { "aborted", GM_TXF_ABO_COL },
2736 { "single_collisions", GM_TXF_SNG_COL },
2737 { "multi_collisions", GM_TXF_MUL_COL },
2738
2739 { "rx_short", GM_RXF_SHT },
2740 { "rx_runt", GM_RXE_FRAG },
2741 { "rx_64_byte_packets", GM_RXF_64B },
2742 { "rx_65_to_127_byte_packets", GM_RXF_127B },
2743 { "rx_128_to_255_byte_packets", GM_RXF_255B },
2744 { "rx_256_to_511_byte_packets", GM_RXF_511B },
2745 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
2746 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
2747 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
2748 { "rx_too_long", GM_RXF_LNG_ERR },
2749 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
2750 { "rx_jabber", GM_RXF_JAB_PKT },
2751 { "rx_fcs_error", GM_RXF_FCS_ERR },
2752
2753 { "tx_64_byte_packets", GM_TXF_64B },
2754 { "tx_65_to_127_byte_packets", GM_TXF_127B },
2755 { "tx_128_to_255_byte_packets", GM_TXF_255B },
2756 { "tx_256_to_511_byte_packets", GM_TXF_511B },
2757 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
2758 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
2759 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
2760 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
2761 };
2762
2763 static u32 sky2_get_rx_csum(struct net_device *dev)
2764 {
2765 struct sky2_port *sky2 = netdev_priv(dev);
2766
2767 return sky2->rx_csum;
2768 }
2769
2770 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
2771 {
2772 struct sky2_port *sky2 = netdev_priv(dev);
2773
2774 sky2->rx_csum = data;
2775
2776 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2777 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
2778
2779 return 0;
2780 }
2781
2782 static u32 sky2_get_msglevel(struct net_device *netdev)
2783 {
2784 struct sky2_port *sky2 = netdev_priv(netdev);
2785 return sky2->msg_enable;
2786 }
2787
2788 static int sky2_nway_reset(struct net_device *dev)
2789 {
2790 struct sky2_port *sky2 = netdev_priv(dev);
2791
2792 if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE)
2793 return -EINVAL;
2794
2795 sky2_phy_reinit(sky2);
2796
2797 return 0;
2798 }
2799
2800 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
2801 {
2802 struct sky2_hw *hw = sky2->hw;
2803 unsigned port = sky2->port;
2804 int i;
2805
2806 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
2807 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
2808 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
2809 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
2810
2811 for (i = 2; i < count; i++)
2812 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
2813 }
2814
2815 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
2816 {
2817 struct sky2_port *sky2 = netdev_priv(netdev);
2818 sky2->msg_enable = value;
2819 }
2820
2821 static int sky2_get_stats_count(struct net_device *dev)
2822 {
2823 return ARRAY_SIZE(sky2_stats);
2824 }
2825
2826 static void sky2_get_ethtool_stats(struct net_device *dev,
2827 struct ethtool_stats *stats, u64 * data)
2828 {
2829 struct sky2_port *sky2 = netdev_priv(dev);
2830
2831 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
2832 }
2833
2834 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
2835 {
2836 int i;
2837
2838 switch (stringset) {
2839 case ETH_SS_STATS:
2840 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
2841 memcpy(data + i * ETH_GSTRING_LEN,
2842 sky2_stats[i].name, ETH_GSTRING_LEN);
2843 break;
2844 }
2845 }
2846
2847 /* Use hardware MIB variables for critical path statistics and
2848 * transmit feedback not reported at interrupt.
2849 * Other errors are accounted for in interrupt handler.
2850 */
2851 static struct net_device_stats *sky2_get_stats(struct net_device *dev)
2852 {
2853 struct sky2_port *sky2 = netdev_priv(dev);
2854 u64 data[13];
2855
2856 sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
2857
2858 sky2->net_stats.tx_bytes = data[0];
2859 sky2->net_stats.rx_bytes = data[1];
2860 sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
2861 sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
2862 sky2->net_stats.multicast = data[3] + data[5];
2863 sky2->net_stats.collisions = data[10];
2864 sky2->net_stats.tx_aborted_errors = data[12];
2865
2866 return &sky2->net_stats;
2867 }
2868
2869 static int sky2_set_mac_address(struct net_device *dev, void *p)
2870 {
2871 struct sky2_port *sky2 = netdev_priv(dev);
2872 struct sky2_hw *hw = sky2->hw;
2873 unsigned port = sky2->port;
2874 const struct sockaddr *addr = p;
2875
2876 if (!is_valid_ether_addr(addr->sa_data))
2877 return -EADDRNOTAVAIL;
2878
2879 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
2880 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
2881 dev->dev_addr, ETH_ALEN);
2882 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
2883 dev->dev_addr, ETH_ALEN);
2884
2885 /* virtual address for data */
2886 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
2887
2888 /* physical address: used for pause frames */
2889 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
2890
2891 return 0;
2892 }
2893
2894 static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
2895 {
2896 u32 bit;
2897
2898 bit = ether_crc(ETH_ALEN, addr) & 63;
2899 filter[bit >> 3] |= 1 << (bit & 7);
2900 }
2901
2902 static void sky2_set_multicast(struct net_device *dev)
2903 {
2904 struct sky2_port *sky2 = netdev_priv(dev);
2905 struct sky2_hw *hw = sky2->hw;
2906 unsigned port = sky2->port;
2907 struct dev_mc_list *list = dev->mc_list;
2908 u16 reg;
2909 u8 filter[8];
2910 int rx_pause;
2911 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
2912
2913 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
2914 memset(filter, 0, sizeof(filter));
2915
2916 reg = gma_read16(hw, port, GM_RX_CTRL);
2917 reg |= GM_RXCR_UCF_ENA;
2918
2919 if (dev->flags & IFF_PROMISC) /* promiscuous */
2920 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
2921 else if (dev->flags & IFF_ALLMULTI)
2922 memset(filter, 0xff, sizeof(filter));
2923 else if (dev->mc_count == 0 && !rx_pause)
2924 reg &= ~GM_RXCR_MCF_ENA;
2925 else {
2926 int i;
2927 reg |= GM_RXCR_MCF_ENA;
2928
2929 if (rx_pause)
2930 sky2_add_filter(filter, pause_mc_addr);
2931
2932 for (i = 0; list && i < dev->mc_count; i++, list = list->next)
2933 sky2_add_filter(filter, list->dmi_addr);
2934 }
2935
2936 gma_write16(hw, port, GM_MC_ADDR_H1,
2937 (u16) filter[0] | ((u16) filter[1] << 8));
2938 gma_write16(hw, port, GM_MC_ADDR_H2,
2939 (u16) filter[2] | ((u16) filter[3] << 8));
2940 gma_write16(hw, port, GM_MC_ADDR_H3,
2941 (u16) filter[4] | ((u16) filter[5] << 8));
2942 gma_write16(hw, port, GM_MC_ADDR_H4,
2943 (u16) filter[6] | ((u16) filter[7] << 8));
2944
2945 gma_write16(hw, port, GM_RX_CTRL, reg);
2946 }
2947
2948 /* Can have one global because blinking is controlled by
2949 * ethtool and that is always under RTNL mutex
2950 */
2951 static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
2952 {
2953 u16 pg;
2954
2955 switch (hw->chip_id) {
2956 case CHIP_ID_YUKON_XL:
2957 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
2958 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
2959 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
2960 on ? (PHY_M_LEDC_LOS_CTRL(1) |
2961 PHY_M_LEDC_INIT_CTRL(7) |
2962 PHY_M_LEDC_STA1_CTRL(7) |
2963 PHY_M_LEDC_STA0_CTRL(7))
2964 : 0);
2965
2966 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
2967 break;
2968
2969 default:
2970 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
2971 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
2972 on ? PHY_M_LED_ALL : 0);
2973 }
2974 }
2975
2976 /* blink LED's for finding board */
2977 static int sky2_phys_id(struct net_device *dev, u32 data)
2978 {
2979 struct sky2_port *sky2 = netdev_priv(dev);
2980 struct sky2_hw *hw = sky2->hw;
2981 unsigned port = sky2->port;
2982 u16 ledctrl, ledover = 0;
2983 long ms;
2984 int interrupted;
2985 int onoff = 1;
2986
2987 if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
2988 ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
2989 else
2990 ms = data * 1000;
2991
2992 /* save initial values */
2993 spin_lock_bh(&sky2->phy_lock);
2994 if (hw->chip_id == CHIP_ID_YUKON_XL) {
2995 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
2996 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
2997 ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
2998 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
2999 } else {
3000 ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
3001 ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
3002 }
3003
3004 interrupted = 0;
3005 while (!interrupted && ms > 0) {
3006 sky2_led(hw, port, onoff);
3007 onoff = !onoff;
3008
3009 spin_unlock_bh(&sky2->phy_lock);
3010 interrupted = msleep_interruptible(250);
3011 spin_lock_bh(&sky2->phy_lock);
3012
3013 ms -= 250;
3014 }
3015
3016 /* resume regularly scheduled programming */
3017 if (hw->chip_id == CHIP_ID_YUKON_XL) {
3018 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3019 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3020 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
3021 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3022 } else {
3023 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
3024 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
3025 }
3026 spin_unlock_bh(&sky2->phy_lock);
3027
3028 return 0;
3029 }
3030
3031 static void sky2_get_pauseparam(struct net_device *dev,
3032 struct ethtool_pauseparam *ecmd)
3033 {
3034 struct sky2_port *sky2 = netdev_priv(dev);
3035
3036 switch (sky2->flow_mode) {
3037 case FC_NONE:
3038 ecmd->tx_pause = ecmd->rx_pause = 0;
3039 break;
3040 case FC_TX:
3041 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3042 break;
3043 case FC_RX:
3044 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3045 break;
3046 case FC_BOTH:
3047 ecmd->tx_pause = ecmd->rx_pause = 1;
3048 }
3049
3050 ecmd->autoneg = sky2->autoneg;
3051 }
3052
3053 static int sky2_set_pauseparam(struct net_device *dev,
3054 struct ethtool_pauseparam *ecmd)
3055 {
3056 struct sky2_port *sky2 = netdev_priv(dev);
3057
3058 sky2->autoneg = ecmd->autoneg;
3059 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3060
3061 if (netif_running(dev))
3062 sky2_phy_reinit(sky2);
3063
3064 return 0;
3065 }
3066
3067 static int sky2_get_coalesce(struct net_device *dev,
3068 struct ethtool_coalesce *ecmd)
3069 {
3070 struct sky2_port *sky2 = netdev_priv(dev);
3071 struct sky2_hw *hw = sky2->hw;
3072
3073 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3074 ecmd->tx_coalesce_usecs = 0;
3075 else {
3076 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
3077 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
3078 }
3079 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
3080
3081 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
3082 ecmd->rx_coalesce_usecs = 0;
3083 else {
3084 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
3085 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
3086 }
3087 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
3088
3089 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
3090 ecmd->rx_coalesce_usecs_irq = 0;
3091 else {
3092 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
3093 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
3094 }
3095
3096 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
3097
3098 return 0;
3099 }
3100
3101 /* Note: this affect both ports */
3102 static int sky2_set_coalesce(struct net_device *dev,
3103 struct ethtool_coalesce *ecmd)
3104 {
3105 struct sky2_port *sky2 = netdev_priv(dev);
3106 struct sky2_hw *hw = sky2->hw;
3107 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
3108
3109 if (ecmd->tx_coalesce_usecs > tmax ||
3110 ecmd->rx_coalesce_usecs > tmax ||
3111 ecmd->rx_coalesce_usecs_irq > tmax)
3112 return -EINVAL;
3113
3114 if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
3115 return -EINVAL;
3116 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
3117 return -EINVAL;
3118 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
3119 return -EINVAL;
3120
3121 if (ecmd->tx_coalesce_usecs == 0)
3122 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
3123 else {
3124 sky2_write32(hw, STAT_TX_TIMER_INI,
3125 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
3126 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3127 }
3128 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
3129
3130 if (ecmd->rx_coalesce_usecs == 0)
3131 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
3132 else {
3133 sky2_write32(hw, STAT_LEV_TIMER_INI,
3134 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
3135 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3136 }
3137 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
3138
3139 if (ecmd->rx_coalesce_usecs_irq == 0)
3140 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
3141 else {
3142 sky2_write32(hw, STAT_ISR_TIMER_INI,
3143 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
3144 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3145 }
3146 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
3147 return 0;
3148 }
3149
3150 static void sky2_get_ringparam(struct net_device *dev,
3151 struct ethtool_ringparam *ering)
3152 {
3153 struct sky2_port *sky2 = netdev_priv(dev);
3154
3155 ering->rx_max_pending = RX_MAX_PENDING;
3156 ering->rx_mini_max_pending = 0;
3157 ering->rx_jumbo_max_pending = 0;
3158 ering->tx_max_pending = TX_RING_SIZE - 1;
3159
3160 ering->rx_pending = sky2->rx_pending;
3161 ering->rx_mini_pending = 0;
3162 ering->rx_jumbo_pending = 0;
3163 ering->tx_pending = sky2->tx_pending;
3164 }
3165
3166 static int sky2_set_ringparam(struct net_device *dev,
3167 struct ethtool_ringparam *ering)
3168 {
3169 struct sky2_port *sky2 = netdev_priv(dev);
3170 int err = 0;
3171
3172 if (ering->rx_pending > RX_MAX_PENDING ||
3173 ering->rx_pending < 8 ||
3174 ering->tx_pending < MAX_SKB_TX_LE ||
3175 ering->tx_pending > TX_RING_SIZE - 1)
3176 return -EINVAL;
3177
3178 if (netif_running(dev))
3179 sky2_down(dev);
3180
3181 sky2->rx_pending = ering->rx_pending;
3182 sky2->tx_pending = ering->tx_pending;
3183
3184 if (netif_running(dev)) {
3185 err = sky2_up(dev);
3186 if (err)
3187 dev_close(dev);
3188 else
3189 sky2_set_multicast(dev);
3190 }
3191
3192 return err;
3193 }
3194
3195 static int sky2_get_regs_len(struct net_device *dev)
3196 {
3197 return 0x4000;
3198 }
3199
3200 /*
3201 * Returns copy of control register region
3202 * Note: access to the RAM address register set will cause timeouts.
3203 */
3204 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
3205 void *p)
3206 {
3207 const struct sky2_port *sky2 = netdev_priv(dev);
3208 const void __iomem *io = sky2->hw->regs;
3209
3210 BUG_ON(regs->len < B3_RI_WTO_R1);
3211 regs->version = 1;
3212 memset(p, 0, regs->len);
3213
3214 memcpy_fromio(p, io, B3_RAM_ADDR);
3215
3216 memcpy_fromio(p + B3_RI_WTO_R1,
3217 io + B3_RI_WTO_R1,
3218 regs->len - B3_RI_WTO_R1);
3219 }
3220
3221 static const struct ethtool_ops sky2_ethtool_ops = {
3222 .get_settings = sky2_get_settings,
3223 .set_settings = sky2_set_settings,
3224 .get_drvinfo = sky2_get_drvinfo,
3225 .get_msglevel = sky2_get_msglevel,
3226 .set_msglevel = sky2_set_msglevel,
3227 .nway_reset = sky2_nway_reset,
3228 .get_regs_len = sky2_get_regs_len,
3229 .get_regs = sky2_get_regs,
3230 .get_link = ethtool_op_get_link,
3231 .get_sg = ethtool_op_get_sg,
3232 .set_sg = ethtool_op_set_sg,
3233 .get_tx_csum = ethtool_op_get_tx_csum,
3234 .set_tx_csum = ethtool_op_set_tx_csum,
3235 .get_tso = ethtool_op_get_tso,
3236 .set_tso = ethtool_op_set_tso,
3237 .get_rx_csum = sky2_get_rx_csum,
3238 .set_rx_csum = sky2_set_rx_csum,
3239 .get_strings = sky2_get_strings,
3240 .get_coalesce = sky2_get_coalesce,
3241 .set_coalesce = sky2_set_coalesce,
3242 .get_ringparam = sky2_get_ringparam,
3243 .set_ringparam = sky2_set_ringparam,
3244 .get_pauseparam = sky2_get_pauseparam,
3245 .set_pauseparam = sky2_set_pauseparam,
3246 .phys_id = sky2_phys_id,
3247 .get_stats_count = sky2_get_stats_count,
3248 .get_ethtool_stats = sky2_get_ethtool_stats,
3249 .get_perm_addr = ethtool_op_get_perm_addr,
3250 };
3251
3252 /* Initialize network device */
3253 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
3254 unsigned port, int highmem)
3255 {
3256 struct sky2_port *sky2;
3257 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
3258
3259 if (!dev) {
3260 printk(KERN_ERR "sky2 etherdev alloc failed");
3261 return NULL;
3262 }
3263
3264 SET_MODULE_OWNER(dev);
3265 SET_NETDEV_DEV(dev, &hw->pdev->dev);
3266 dev->irq = hw->pdev->irq;
3267 dev->open = sky2_up;
3268 dev->stop = sky2_down;
3269 dev->do_ioctl = sky2_ioctl;
3270 dev->hard_start_xmit = sky2_xmit_frame;
3271 dev->get_stats = sky2_get_stats;
3272 dev->set_multicast_list = sky2_set_multicast;
3273 dev->set_mac_address = sky2_set_mac_address;
3274 dev->change_mtu = sky2_change_mtu;
3275 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
3276 dev->tx_timeout = sky2_tx_timeout;
3277 dev->watchdog_timeo = TX_WATCHDOG;
3278 if (port == 0)
3279 dev->poll = sky2_poll;
3280 dev->weight = NAPI_WEIGHT;
3281 #ifdef CONFIG_NET_POLL_CONTROLLER
3282 /* Network console (only works on port 0)
3283 * because netpoll makes assumptions about NAPI
3284 */
3285 if (port == 0)
3286 dev->poll_controller = sky2_netpoll;
3287 #endif
3288
3289 sky2 = netdev_priv(dev);
3290 sky2->netdev = dev;
3291 sky2->hw = hw;
3292 sky2->msg_enable = netif_msg_init(debug, default_msg);
3293
3294 /* Auto speed and flow control */
3295 sky2->autoneg = AUTONEG_ENABLE;
3296 sky2->flow_mode = FC_BOTH;
3297
3298 sky2->duplex = -1;
3299 sky2->speed = -1;
3300 sky2->advertising = sky2_supported_modes(hw);
3301 sky2->rx_csum = 1;
3302
3303 spin_lock_init(&sky2->phy_lock);
3304 sky2->tx_pending = TX_DEF_PENDING;
3305 sky2->rx_pending = RX_DEF_PENDING;
3306
3307 hw->dev[port] = dev;
3308
3309 sky2->port = port;
3310
3311 if (hw->chip_id != CHIP_ID_YUKON_EC_U)
3312 dev->features |= NETIF_F_TSO;
3313 if (highmem)
3314 dev->features |= NETIF_F_HIGHDMA;
3315 dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
3316
3317 #ifdef SKY2_VLAN_TAG_USED
3318 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
3319 dev->vlan_rx_register = sky2_vlan_rx_register;
3320 dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid;
3321 #endif
3322
3323 /* read the mac address */
3324 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
3325 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
3326
3327 /* device is off until link detection */
3328 netif_carrier_off(dev);
3329 netif_stop_queue(dev);
3330
3331 return dev;
3332 }
3333
3334 static void __devinit sky2_show_addr(struct net_device *dev)
3335 {
3336 const struct sky2_port *sky2 = netdev_priv(dev);
3337
3338 if (netif_msg_probe(sky2))
3339 printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
3340 dev->name,
3341 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
3342 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
3343 }
3344
3345 /* Handle software interrupt used during MSI test */
3346 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
3347 {
3348 struct sky2_hw *hw = dev_id;
3349 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3350
3351 if (status == 0)
3352 return IRQ_NONE;
3353
3354 if (status & Y2_IS_IRQ_SW) {
3355 hw->msi = 1;
3356 wake_up(&hw->msi_wait);
3357 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3358 }
3359 sky2_write32(hw, B0_Y2_SP_ICR, 2);
3360
3361 return IRQ_HANDLED;
3362 }
3363
3364 /* Test interrupt path by forcing a a software IRQ */
3365 static int __devinit sky2_test_msi(struct sky2_hw *hw)
3366 {
3367 struct pci_dev *pdev = hw->pdev;
3368 int err;
3369
3370 init_waitqueue_head (&hw->msi_wait);
3371
3372 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
3373
3374 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
3375 if (err) {
3376 printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
3377 pci_name(pdev), pdev->irq);
3378 return err;
3379 }
3380
3381 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
3382 sky2_read8(hw, B0_CTST);
3383
3384 wait_event_timeout(hw->msi_wait, hw->msi, HZ/10);
3385
3386 if (!hw->msi) {
3387 /* MSI test failed, go back to INTx mode */
3388 printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
3389 "switching to INTx mode.\n",
3390 pci_name(pdev));
3391
3392 err = -EOPNOTSUPP;
3393 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3394 }
3395
3396 sky2_write32(hw, B0_IMSK, 0);
3397 sky2_read32(hw, B0_IMSK);
3398
3399 free_irq(pdev->irq, hw);
3400
3401 return err;
3402 }
3403
3404 static int __devinit sky2_probe(struct pci_dev *pdev,
3405 const struct pci_device_id *ent)
3406 {
3407 struct net_device *dev, *dev1 = NULL;
3408 struct sky2_hw *hw;
3409 int err, pm_cap, using_dac = 0;
3410
3411 err = pci_enable_device(pdev);
3412 if (err) {
3413 printk(KERN_ERR PFX "%s cannot enable PCI device\n",
3414 pci_name(pdev));
3415 goto err_out;
3416 }
3417
3418 err = pci_request_regions(pdev, DRV_NAME);
3419 if (err) {
3420 printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
3421 pci_name(pdev));
3422 goto err_out;
3423 }
3424
3425 pci_set_master(pdev);
3426
3427 /* Find power-management capability. */
3428 pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
3429 if (pm_cap == 0) {
3430 printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
3431 "aborting.\n");
3432 err = -EIO;
3433 goto err_out_free_regions;
3434 }
3435
3436 if (sizeof(dma_addr_t) > sizeof(u32) &&
3437 !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
3438 using_dac = 1;
3439 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3440 if (err < 0) {
3441 printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA "
3442 "for consistent allocations\n", pci_name(pdev));
3443 goto err_out_free_regions;
3444 }
3445
3446 } else {
3447 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3448 if (err) {
3449 printk(KERN_ERR PFX "%s no usable DMA configuration\n",
3450 pci_name(pdev));
3451 goto err_out_free_regions;
3452 }
3453 }
3454
3455 err = -ENOMEM;
3456 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
3457 if (!hw) {
3458 printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
3459 pci_name(pdev));
3460 goto err_out_free_regions;
3461 }
3462
3463 hw->pdev = pdev;
3464
3465 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
3466 if (!hw->regs) {
3467 printk(KERN_ERR PFX "%s: cannot map device registers\n",
3468 pci_name(pdev));
3469 goto err_out_free_hw;
3470 }
3471 hw->pm_cap = pm_cap;
3472
3473 #ifdef __BIG_ENDIAN
3474 /* The sk98lin vendor driver uses hardware byte swapping but
3475 * this driver uses software swapping.
3476 */
3477 {
3478 u32 reg;
3479 reg = sky2_pci_read32(hw, PCI_DEV_REG2);
3480 reg &= ~PCI_REV_DESC;
3481 sky2_pci_write32(hw, PCI_DEV_REG2, reg);
3482 }
3483 #endif
3484
3485 /* ring for status responses */
3486 hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
3487 &hw->st_dma);
3488 if (!hw->st_le)
3489 goto err_out_iounmap;
3490
3491 err = sky2_reset(hw);
3492 if (err)
3493 goto err_out_iounmap;
3494
3495 printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
3496 DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
3497 pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
3498 hw->chip_id, hw->chip_rev);
3499
3500 dev = sky2_init_netdev(hw, 0, using_dac);
3501 if (!dev)
3502 goto err_out_free_pci;
3503
3504 if (!disable_msi && pci_enable_msi(pdev) == 0) {
3505 err = sky2_test_msi(hw);
3506 if (err == -EOPNOTSUPP)
3507 pci_disable_msi(pdev);
3508 else if (err)
3509 goto err_out_free_netdev;
3510 }
3511
3512 err = register_netdev(dev);
3513 if (err) {
3514 printk(KERN_ERR PFX "%s: cannot register net device\n",
3515 pci_name(pdev));
3516 goto err_out_free_netdev;
3517 }
3518
3519 err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
3520 dev->name, hw);
3521 if (err) {
3522 printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
3523 pci_name(pdev), pdev->irq);
3524 goto err_out_unregister;
3525 }
3526 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3527
3528 sky2_show_addr(dev);
3529
3530 if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
3531 if (register_netdev(dev1) == 0)
3532 sky2_show_addr(dev1);
3533 else {
3534 /* Failure to register second port need not be fatal */
3535 printk(KERN_WARNING PFX
3536 "register of second port failed\n");
3537 hw->dev[1] = NULL;
3538 free_netdev(dev1);
3539 }
3540 }
3541
3542 setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
3543 INIT_WORK(&hw->restart_work, sky2_restart);
3544
3545 sky2_idle_start(hw);
3546
3547 pci_set_drvdata(pdev, hw);
3548
3549 return 0;
3550
3551 err_out_unregister:
3552 if (hw->msi)
3553 pci_disable_msi(pdev);
3554 unregister_netdev(dev);
3555 err_out_free_netdev:
3556 free_netdev(dev);
3557 err_out_free_pci:
3558 sky2_write8(hw, B0_CTST, CS_RST_SET);
3559 pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3560 err_out_iounmap:
3561 iounmap(hw->regs);
3562 err_out_free_hw:
3563 kfree(hw);
3564 err_out_free_regions:
3565 pci_release_regions(pdev);
3566 pci_disable_device(pdev);
3567 err_out:
3568 return err;
3569 }
3570
3571 static void __devexit sky2_remove(struct pci_dev *pdev)
3572 {
3573 struct sky2_hw *hw = pci_get_drvdata(pdev);
3574 struct net_device *dev0, *dev1;
3575
3576 if (!hw)
3577 return;
3578
3579 del_timer_sync(&hw->idle_timer);
3580
3581 sky2_write32(hw, B0_IMSK, 0);
3582 synchronize_irq(hw->pdev->irq);
3583
3584 dev0 = hw->dev[0];
3585 dev1 = hw->dev[1];
3586 if (dev1)
3587 unregister_netdev(dev1);
3588 unregister_netdev(dev0);
3589
3590 sky2_set_power_state(hw, PCI_D3hot);
3591 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
3592 sky2_write8(hw, B0_CTST, CS_RST_SET);
3593 sky2_read8(hw, B0_CTST);
3594
3595 free_irq(pdev->irq, hw);
3596 if (hw->msi)
3597 pci_disable_msi(pdev);
3598 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3599 pci_release_regions(pdev);
3600 pci_disable_device(pdev);
3601
3602 if (dev1)
3603 free_netdev(dev1);
3604 free_netdev(dev0);
3605 iounmap(hw->regs);
3606 kfree(hw);
3607
3608 pci_set_drvdata(pdev, NULL);
3609 }
3610
3611 #ifdef CONFIG_PM
3612 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
3613 {
3614 struct sky2_hw *hw = pci_get_drvdata(pdev);
3615 int i;
3616 pci_power_t pstate = pci_choose_state(pdev, state);
3617
3618 if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
3619 return -EINVAL;
3620
3621 del_timer_sync(&hw->idle_timer);
3622 netif_poll_disable(hw->dev[0]);
3623
3624 for (i = 0; i < hw->ports; i++) {
3625 struct net_device *dev = hw->dev[i];
3626
3627 if (netif_running(dev)) {
3628 sky2_down(dev);
3629 netif_device_detach(dev);
3630 }
3631 }
3632
3633 sky2_write32(hw, B0_IMSK, 0);
3634 pci_save_state(pdev);
3635 sky2_set_power_state(hw, pstate);
3636 return 0;
3637 }
3638
3639 static int sky2_resume(struct pci_dev *pdev)
3640 {
3641 struct sky2_hw *hw = pci_get_drvdata(pdev);
3642 int i, err;
3643
3644 pci_restore_state(pdev);
3645 pci_enable_wake(pdev, PCI_D0, 0);
3646
3647 if (hw->chip_id == CHIP_ID_YUKON_EC_U)
3648 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
3649 sky2_set_power_state(hw, PCI_D0);
3650
3651 err = sky2_reset(hw);
3652 if (err)
3653 goto out;
3654
3655 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3656
3657 for (i = 0; i < hw->ports; i++) {
3658 struct net_device *dev = hw->dev[i];
3659 if (netif_running(dev)) {
3660 netif_device_attach(dev);
3661
3662 err = sky2_up(dev);
3663 if (err) {
3664 printk(KERN_ERR PFX "%s: could not up: %d\n",
3665 dev->name, err);
3666 dev_close(dev);
3667 goto out;
3668 }
3669 }
3670 }
3671
3672 netif_poll_enable(hw->dev[0]);
3673 sky2_idle_start(hw);
3674 out:
3675 return err;
3676 }
3677 #endif
3678
3679 static struct pci_driver sky2_driver = {
3680 .name = DRV_NAME,
3681 .id_table = sky2_id_table,
3682 .probe = sky2_probe,
3683 .remove = __devexit_p(sky2_remove),
3684 #ifdef CONFIG_PM
3685 .suspend = sky2_suspend,
3686 .resume = sky2_resume,
3687 #endif
3688 };
3689
3690 static int __init sky2_init_module(void)
3691 {
3692 return pci_register_driver(&sky2_driver);
3693 }
3694
3695 static void __exit sky2_cleanup_module(void)
3696 {
3697 pci_unregister_driver(&sky2_driver);
3698 }
3699
3700 module_init(sky2_init_module);
3701 module_exit(sky2_cleanup_module);
3702
3703 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
3704 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
3705 MODULE_LICENSE("GPL");
3706 MODULE_VERSION(DRV_VERSION);
Linux with added FPC-III support