usb: xhci-plat: properly handle probe deferral for devm_clk_get()

[linux/fpc-iii.git] / drivers / crypto / ux500 / hash / hash_core.c

/*
 * Cryptographic API.
 * Support for Nomadik hardware crypto engine.

 * Copyright (C) ST-Ericsson SA 2010
 * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson
 * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
 * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
 * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
 * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
 * License terms: GNU General Public License (GPL) version 2
 */

#define pr_fmt(fmt) "hashX hashX: " fmt

#include <linux/clk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/klist.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/crypto.h>

#include <linux/regulator/consumer.h>
#include <linux/dmaengine.h>
#include <linux/bitops.h>

#include <crypto/internal/hash.h>
#include <crypto/sha.h>
#include <crypto/scatterwalk.h>
#include <crypto/algapi.h>

#include <linux/platform_data/crypto-ux500.h>

#include "hash_alg.h"

static int hash_mode;
module_param(hash_mode, int, 0);
MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1");

/* HMAC-SHA1, no key */
static const u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = {
        0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08,
        0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63,
        0x70, 0x69, 0x0e, 0x1d
};

/* HMAC-SHA256, no key */
static const u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = {
        0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec,
        0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5,
        0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53,
        0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad
};

/**
 * struct hash_driver_data - data specific to the driver.
 *
 * @device_list:        A list of registered devices to choose from.
 * @device_allocation:  A semaphore initialized with number of devices.
 */
struct hash_driver_data {
        struct klist            device_list;
        struct semaphore        device_allocation;
};

static struct hash_driver_data  driver_data;

/* Declaration of functions */
/**
 * hash_messagepad - Pads a message and write the nblw bits.
 * @device_data:        Structure for the hash device.
 * @message:            Last word of a message
 * @index_bytes:        The number of bytes in the last message
 *
 * This function manages the final part of the digest calculation, when less
 * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
 *
 */
static void hash_messagepad(struct hash_device_data *device_data,
                            const u32 *message, u8 index_bytes);

/**
 * release_hash_device - Releases a previously allocated hash device.
 * @device_data:        Structure for the hash device.
 *
 */
static void release_hash_device(struct hash_device_data *device_data)
{
        spin_lock(&device_data->ctx_lock);
        device_data->current_ctx->device = NULL;
        device_data->current_ctx = NULL;
        spin_unlock(&device_data->ctx_lock);

        /*
         * The down_interruptible part for this semaphore is called in
         * cryp_get_device_data.
         */
        up(&driver_data.device_allocation);
}

static void hash_dma_setup_channel(struct hash_device_data *device_data,
                                   struct device *dev)
{
        struct hash_platform_data *platform_data = dev->platform_data;
        struct dma_slave_config conf = {
                .direction = DMA_MEM_TO_DEV,
                .dst_addr = device_data->phybase + HASH_DMA_FIFO,
                .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
                .dst_maxburst = 16,
        };

        dma_cap_zero(device_data->dma.mask);
        dma_cap_set(DMA_SLAVE, device_data->dma.mask);

        device_data->dma.cfg_mem2hash = platform_data->mem_to_engine;
        device_data->dma.chan_mem2hash =
                dma_request_channel(device_data->dma.mask,
                                    platform_data->dma_filter,
                                    device_data->dma.cfg_mem2hash);

        dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf);

        init_completion(&device_data->dma.complete);
}

static void hash_dma_callback(void *data)
{
        struct hash_ctx *ctx = data;

        complete(&ctx->device->dma.complete);
}

static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
                                 int len, enum dma_data_direction direction)
{
        struct dma_async_tx_descriptor *desc = NULL;
        struct dma_chan *channel = NULL;
        dma_cookie_t cookie;

        if (direction != DMA_TO_DEVICE) {
                dev_err(ctx->device->dev, "%s: Invalid DMA direction\n",
                        __func__);
                return -EFAULT;
        }

        sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE);

        channel = ctx->device->dma.chan_mem2hash;
        ctx->device->dma.sg = sg;
        ctx->device->dma.sg_len = dma_map_sg(channel->device->dev,
                        ctx->device->dma.sg, ctx->device->dma.nents,
                        direction);

        if (!ctx->device->dma.sg_len) {
                dev_err(ctx->device->dev, "%s: Could not map the sg list (TO_DEVICE)\n",
                        __func__);
                return -EFAULT;
        }

        dev_dbg(ctx->device->dev, "%s: Setting up DMA for buffer (TO_DEVICE)\n",
                __func__);
        desc = dmaengine_prep_slave_sg(channel,
                        ctx->device->dma.sg, ctx->device->dma.sg_len,
                        direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
        if (!desc) {
                dev_err(ctx->device->dev,
                        "%s: dmaengine_prep_slave_sg() failed!\n", __func__);
                return -EFAULT;
        }

        desc->callback = hash_dma_callback;
        desc->callback_param = ctx;

        cookie = dmaengine_submit(desc);
        dma_async_issue_pending(channel);

        return 0;
}

static void hash_dma_done(struct hash_ctx *ctx)
{
        struct dma_chan *chan;

        chan = ctx->device->dma.chan_mem2hash;
        dmaengine_terminate_all(chan);
        dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
                     ctx->device->dma.sg_len, DMA_TO_DEVICE);
}

static int hash_dma_write(struct hash_ctx *ctx,
                          struct scatterlist *sg, int len)
{
        int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
        if (error) {
                dev_dbg(ctx->device->dev,
                        "%s: hash_set_dma_transfer() failed\n", __func__);
                return error;
        }

        return len;
}

/**
 * get_empty_message_digest - Returns a pre-calculated digest for
 * the empty message.
 * @device_data:        Structure for the hash device.
 * @zero_hash:          Buffer to return the empty message digest.
 * @zero_hash_size:     Hash size of the empty message digest.
 * @zero_digest:        True if zero_digest returned.
 */
static int get_empty_message_digest(
                struct hash_device_data *device_data,
                u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest)
{
        int ret = 0;
        struct hash_ctx *ctx = device_data->current_ctx;
        *zero_digest = false;

        /**
         * Caller responsible for ctx != NULL.
         */

        if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) {
                if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
                        memcpy(zero_hash, &sha1_zero_message_hash[0],
                               SHA1_DIGEST_SIZE);
                        *zero_hash_size = SHA1_DIGEST_SIZE;
                        *zero_digest = true;
                } else if (HASH_ALGO_SHA256 ==
                                ctx->config.algorithm) {
                        memcpy(zero_hash, &sha256_zero_message_hash[0],
                               SHA256_DIGEST_SIZE);
                        *zero_hash_size = SHA256_DIGEST_SIZE;
                        *zero_digest = true;
                } else {
                        dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
                                __func__);
                        ret = -EINVAL;
                        goto out;
                }
        } else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) {
                if (!ctx->keylen) {
                        if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
                                memcpy(zero_hash, &zero_message_hmac_sha1[0],
                                       SHA1_DIGEST_SIZE);
                                *zero_hash_size = SHA1_DIGEST_SIZE;
                                *zero_digest = true;
                        } else if (HASH_ALGO_SHA256 == ctx->config.algorithm) {
                                memcpy(zero_hash, &zero_message_hmac_sha256[0],
                                       SHA256_DIGEST_SIZE);
                                *zero_hash_size = SHA256_DIGEST_SIZE;
                                *zero_digest = true;
                        } else {
                                dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
                                        __func__);
                                ret = -EINVAL;
                                goto out;
                        }
                } else {
                        dev_dbg(device_data->dev,
                                "%s: Continue hash calculation, since hmac key available\n",
                                __func__);
                }
        }
out:

        return ret;
}

/**
 * hash_disable_power - Request to disable power and clock.
 * @device_data:        Structure for the hash device.
 * @save_device_state:  If true, saves the current hw state.
 *
 * This function request for disabling power (regulator) and clock,
 * and could also save current hw state.
 */
static int hash_disable_power(struct hash_device_data *device_data,
                              bool save_device_state)
{
        int ret = 0;
        struct device *dev = device_data->dev;

        spin_lock(&device_data->power_state_lock);
        if (!device_data->power_state)
                goto out;

        if (save_device_state) {
                hash_save_state(device_data,
                                &device_data->state);
                device_data->restore_dev_state = true;
        }

        clk_disable(device_data->clk);
        ret = regulator_disable(device_data->regulator);
        if (ret)
                dev_err(dev, "%s: regulator_disable() failed!\n", __func__);

        device_data->power_state = false;

out:
        spin_unlock(&device_data->power_state_lock);

        return ret;
}

/**
 * hash_enable_power - Request to enable power and clock.
 * @device_data:                Structure for the hash device.
 * @restore_device_state:       If true, restores a previous saved hw state.
 *
 * This function request for enabling power (regulator) and clock,
 * and could also restore a previously saved hw state.
 */
static int hash_enable_power(struct hash_device_data *device_data,
                             bool restore_device_state)
{
        int ret = 0;
        struct device *dev = device_data->dev;

        spin_lock(&device_data->power_state_lock);
        if (!device_data->power_state) {
                ret = regulator_enable(device_data->regulator);
                if (ret) {
                        dev_err(dev, "%s: regulator_enable() failed!\n",
                                __func__);
                        goto out;
                }
                ret = clk_enable(device_data->clk);
                if (ret) {
                        dev_err(dev, "%s: clk_enable() failed!\n", __func__);
                        ret = regulator_disable(
                                        device_data->regulator);
                        goto out;
                }
                device_data->power_state = true;
        }

        if (device_data->restore_dev_state) {
                if (restore_device_state) {
                        device_data->restore_dev_state = false;
                        hash_resume_state(device_data, &device_data->state);
                }
        }
out:
        spin_unlock(&device_data->power_state_lock);

        return ret;
}

/**
 * hash_get_device_data - Checks for an available hash device and return it.
 * @hash_ctx:           Structure for the hash context.
 * @device_data:        Structure for the hash device.
 *
 * This function check for an available hash device and return it to
 * the caller.
 * Note! Caller need to release the device, calling up().
 */
static int hash_get_device_data(struct hash_ctx *ctx,
                                struct hash_device_data **device_data)
{
        int                     ret;
        struct klist_iter       device_iterator;
        struct klist_node       *device_node;
        struct hash_device_data *local_device_data = NULL;

        /* Wait until a device is available */
        ret = down_interruptible(&driver_data.device_allocation);
        if (ret)
                return ret;  /* Interrupted */

        /* Select a device */
        klist_iter_init(&driver_data.device_list, &device_iterator);
        device_node = klist_next(&device_iterator);
        while (device_node) {
                local_device_data = container_of(device_node,
                                           struct hash_device_data, list_node);
                spin_lock(&local_device_data->ctx_lock);
                /* current_ctx allocates a device, NULL = unallocated */
                if (local_device_data->current_ctx) {
                        device_node = klist_next(&device_iterator);
                } else {
                        local_device_data->current_ctx = ctx;
                        ctx->device = local_device_data;
                        spin_unlock(&local_device_data->ctx_lock);
                        break;
                }
                spin_unlock(&local_device_data->ctx_lock);
        }
        klist_iter_exit(&device_iterator);

        if (!device_node) {
                /**
                 * No free device found.
                 * Since we allocated a device with down_interruptible, this
                 * should not be able to happen.
                 * Number of available devices, which are contained in
                 * device_allocation, is therefore decremented by not doing
                 * an up(device_allocation).
                 */
                return -EBUSY;
        }

        *device_data = local_device_data;

        return 0;
}

/**
 * hash_hw_write_key - Writes the key to the hardware registries.
 *
 * @device_data:        Structure for the hash device.
 * @key:                Key to be written.
 * @keylen:             The lengt of the key.
 *
 * Note! This function DOES NOT write to the NBLW registry, even though
 * specified in the the hw design spec. Either due to incorrect info in the
 * spec or due to a bug in the hw.
 */
static void hash_hw_write_key(struct hash_device_data *device_data,
                              const u8 *key, unsigned int keylen)
{
        u32 word = 0;
        int nwords = 1;

        HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);

        while (keylen >= 4) {
                u32 *key_word = (u32 *)key;

                HASH_SET_DIN(key_word, nwords);
                keylen -= 4;
                key += 4;
        }

        /* Take care of the remaining bytes in the last word */
        if (keylen) {
                word = 0;
                while (keylen) {
                        word |= (key[keylen - 1] << (8 * (keylen - 1)));
                        keylen--;
                }

                HASH_SET_DIN(&word, nwords);
        }

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();

        HASH_SET_DCAL;

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();
}

/**
 * init_hash_hw - Initialise the hash hardware for a new calculation.
 * @device_data:        Structure for the hash device.
 * @ctx:                The hash context.
 *
 * This function will enable the bits needed to clear and start a new
 * calculation.
 */
static int init_hash_hw(struct hash_device_data *device_data,
                        struct hash_ctx *ctx)
{
        int ret = 0;

        ret = hash_setconfiguration(device_data, &ctx->config);
        if (ret) {
                dev_err(device_data->dev, "%s: hash_setconfiguration() failed!\n",
                        __func__);
                return ret;
        }

        hash_begin(device_data, ctx);

        if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
                hash_hw_write_key(device_data, ctx->key, ctx->keylen);

        return ret;
}

/**
 * hash_get_nents - Return number of entries (nents) in scatterlist (sg).
 *
 * @sg:         Scatterlist.
 * @size:       Size in bytes.
 * @aligned:    True if sg data aligned to work in DMA mode.
 *
 */
static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned)
{
        int nents = 0;
        bool aligned_data = true;

        while (size > 0 && sg) {
                nents++;
                size -= sg->length;

                /* hash_set_dma_transfer will align last nent */
                if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE)) ||
                    (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) && size > 0))
                        aligned_data = false;

                sg = sg_next(sg);
        }

        if (aligned)
                *aligned = aligned_data;

        if (size != 0)
                return -EFAULT;

        return nents;
}

/**
 * hash_dma_valid_data - checks for dma valid sg data.
 * @sg:         Scatterlist.
 * @datasize:   Datasize in bytes.
 *
 * NOTE! This function checks for dma valid sg data, since dma
 * only accept datasizes of even wordsize.
 */
static bool hash_dma_valid_data(struct scatterlist *sg, int datasize)
{
        bool aligned;

        /* Need to include at least one nent, else error */
        if (hash_get_nents(sg, datasize, &aligned) < 1)
                return false;

        return aligned;
}

/**
 * hash_init - Common hash init function for SHA1/SHA2 (SHA256).
 * @req: The hash request for the job.
 *
 * Initialize structures.
 */
static int hash_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);

        if (!ctx->key)
                ctx->keylen = 0;

        memset(&req_ctx->state, 0, sizeof(struct hash_state));
        req_ctx->updated = 0;
        if (hash_mode == HASH_MODE_DMA) {
                if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
                        req_ctx->dma_mode = false; /* Don't use DMA */

                        pr_debug("%s: DMA mode, but direct to CPU mode for data size < %d\n",
                                 __func__, HASH_DMA_ALIGN_SIZE);
                } else {
                        if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE &&
                            hash_dma_valid_data(req->src, req->nbytes)) {
                                req_ctx->dma_mode = true;
                        } else {
                                req_ctx->dma_mode = false;
                                pr_debug("%s: DMA mode, but use CPU mode for datalength < %d or non-aligned data, except in last nent\n",
                                         __func__,
                                         HASH_DMA_PERFORMANCE_MIN_SIZE);
                        }
                }
        }
        return 0;
}

/**
 * hash_processblock - This function processes a single block of 512 bits (64
 *                     bytes), word aligned, starting at message.
 * @device_data:        Structure for the hash device.
 * @message:            Block (512 bits) of message to be written to
 *                      the HASH hardware.
 *
 */
static void hash_processblock(struct hash_device_data *device_data,
                              const u32 *message, int length)
{
        int len = length / HASH_BYTES_PER_WORD;
        /*
         * NBLW bits. Reset the number of bits in last word (NBLW).
         */
        HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);

        /*
         * Write message data to the HASH_DIN register.
         */
        HASH_SET_DIN(message, len);
}

/**
 * hash_messagepad - Pads a message and write the nblw bits.
 * @device_data:        Structure for the hash device.
 * @message:            Last word of a message.
 * @index_bytes:        The number of bytes in the last message.
 *
 * This function manages the final part of the digest calculation, when less
 * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
 *
 */
static void hash_messagepad(struct hash_device_data *device_data,
                            const u32 *message, u8 index_bytes)
{
        int nwords = 1;

        /*
         * Clear hash str register, only clear NBLW
         * since DCAL will be reset by hardware.
         */
        HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);

        /* Main loop */
        while (index_bytes >= 4) {
                HASH_SET_DIN(message, nwords);
                index_bytes -= 4;
                message++;
        }

        if (index_bytes)
                HASH_SET_DIN(message, nwords);

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();

        /* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
        HASH_SET_NBLW(index_bytes * 8);
        dev_dbg(device_data->dev, "%s: DIN=0x%08x NBLW=%lu\n",
                __func__, readl_relaxed(&device_data->base->din),
                readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
        HASH_SET_DCAL;
        dev_dbg(device_data->dev, "%s: after dcal -> DIN=0x%08x NBLW=%lu\n",
                __func__, readl_relaxed(&device_data->base->din),
                readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();
}

/**
 * hash_incrementlength - Increments the length of the current message.
 * @ctx: Hash context
 * @incr: Length of message processed already
 *
 * Overflow cannot occur, because conditions for overflow are checked in
 * hash_hw_update.
 */
static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
{
        ctx->state.length.low_word += incr;

        /* Check for wrap-around */
        if (ctx->state.length.low_word < incr)
                ctx->state.length.high_word++;
}

/**
 * hash_setconfiguration - Sets the required configuration for the hash
 *                         hardware.
 * @device_data:        Structure for the hash device.
 * @config:             Pointer to a configuration structure.
 */
int hash_setconfiguration(struct hash_device_data *device_data,
                          struct hash_config *config)
{
        int ret = 0;

        if (config->algorithm != HASH_ALGO_SHA1 &&
            config->algorithm != HASH_ALGO_SHA256)
                return -EPERM;

        /*
         * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data
         * to be written to HASH_DIN is considered as 32 bits.
         */
        HASH_SET_DATA_FORMAT(config->data_format);

        /*
         * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256
         */
        switch (config->algorithm) {
        case HASH_ALGO_SHA1:
                HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
                break;

        case HASH_ALGO_SHA256:
                HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
                break;

        default:
                dev_err(device_data->dev, "%s: Incorrect algorithm\n",
                        __func__);
                return -EPERM;
        }

        /*
         * MODE bit. This bit selects between HASH or HMAC mode for the
         * selected algorithm. 0b0 = HASH and 0b1 = HMAC.
         */
        if (HASH_OPER_MODE_HASH == config->oper_mode)
                HASH_CLEAR_BITS(&device_data->base->cr,
                                HASH_CR_MODE_MASK);
        else if (HASH_OPER_MODE_HMAC == config->oper_mode) {
                HASH_SET_BITS(&device_data->base->cr, HASH_CR_MODE_MASK);
                if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) {
                        /* Truncate key to blocksize */
                        dev_dbg(device_data->dev, "%s: LKEY set\n", __func__);
                        HASH_SET_BITS(&device_data->base->cr,
                                      HASH_CR_LKEY_MASK);
                } else {
                        dev_dbg(device_data->dev, "%s: LKEY cleared\n",
                                __func__);
                        HASH_CLEAR_BITS(&device_data->base->cr,
                                        HASH_CR_LKEY_MASK);
                }
        } else {        /* Wrong hash mode */
                ret = -EPERM;
                dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
                        __func__);
        }
        return ret;
}

/**
 * hash_begin - This routine resets some globals and initializes the hash
 *              hardware.
 * @device_data:        Structure for the hash device.
 * @ctx:                Hash context.
 */
void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
{
        /* HW and SW initializations */
        /* Note: there is no need to initialize buffer and digest members */

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();

        /*
         * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
         * prepare the initialize the HASH accelerator to compute the message
         * digest of a new message.
         */
        HASH_INITIALIZE;

        /*
         * NBLW bits. Reset the number of bits in last word (NBLW).
         */
        HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
}

static int hash_process_data(struct hash_device_data *device_data,
                             struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
                             int msg_length, u8 *data_buffer, u8 *buffer,
                             u8 *index)
{
        int ret = 0;
        u32 count;

        do {
                if ((*index + msg_length) < HASH_BLOCK_SIZE) {
                        for (count = 0; count < msg_length; count++) {
                                buffer[*index + count] =
                                        *(data_buffer + count);
                        }
                        *index += msg_length;
                        msg_length = 0;
                } else {
                        if (req_ctx->updated) {
                                ret = hash_resume_state(device_data,
                                                &device_data->state);
                                memmove(req_ctx->state.buffer,
                                        device_data->state.buffer,
                                        HASH_BLOCK_SIZE);
                                if (ret) {
                                        dev_err(device_data->dev,
                                                "%s: hash_resume_state() failed!\n",
                                                __func__);
                                        goto out;
                                }
                        } else {
                                ret = init_hash_hw(device_data, ctx);
                                if (ret) {
                                        dev_err(device_data->dev,
                                                "%s: init_hash_hw() failed!\n",
                                                __func__);
                                        goto out;
                                }
                                req_ctx->updated = 1;
                        }
                        /*
                         * If 'data_buffer' is four byte aligned and
                         * local buffer does not have any data, we can
                         * write data directly from 'data_buffer' to
                         * HW peripheral, otherwise we first copy data
                         * to a local buffer
                         */
                        if ((0 == (((u32)data_buffer) % 4)) &&
                            (0 == *index))
                                hash_processblock(device_data,
                                                  (const u32 *)data_buffer,
                                                  HASH_BLOCK_SIZE);
                        else {
                                for (count = 0;
                                     count < (u32)(HASH_BLOCK_SIZE - *index);
                                     count++) {
                                        buffer[*index + count] =
                                                *(data_buffer + count);
                                }
                                hash_processblock(device_data,
                                                  (const u32 *)buffer,
                                                  HASH_BLOCK_SIZE);
                        }
                        hash_incrementlength(req_ctx, HASH_BLOCK_SIZE);
                        data_buffer += (HASH_BLOCK_SIZE - *index);

                        msg_length -= (HASH_BLOCK_SIZE - *index);
                        *index = 0;

                        ret = hash_save_state(device_data,
                                        &device_data->state);

                        memmove(device_data->state.buffer,
                                req_ctx->state.buffer,
                                HASH_BLOCK_SIZE);
                        if (ret) {
                                dev_err(device_data->dev, "%s: hash_save_state() failed!\n",
                                        __func__);
                                goto out;
                        }
                }
        } while (msg_length != 0);
out:

        return ret;
}

/**
 * hash_dma_final - The hash dma final function for SHA1/SHA256.
 * @req:        The hash request for the job.
 */
static int hash_dma_final(struct ahash_request *req)
{
        int ret = 0;
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
        struct hash_device_data *device_data;
        u8 digest[SHA256_DIGEST_SIZE];
        int bytes_written = 0;

        ret = hash_get_device_data(ctx, &device_data);
        if (ret)
                return ret;

        dev_dbg(device_data->dev, "%s: (ctx=0x%x)!\n", __func__, (u32) ctx);

        if (req_ctx->updated) {
                ret = hash_resume_state(device_data, &device_data->state);

                if (ret) {
                        dev_err(device_data->dev, "%s: hash_resume_state() failed!\n",
                                __func__);
                        goto out;
                }
        }

        if (!req_ctx->updated) {
                ret = hash_setconfiguration(device_data, &ctx->config);
                if (ret) {
                        dev_err(device_data->dev,
                                "%s: hash_setconfiguration() failed!\n",
                                __func__);
                        goto out;
                }

                /* Enable DMA input */
                if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) {
                        HASH_CLEAR_BITS(&device_data->base->cr,
                                        HASH_CR_DMAE_MASK);
                } else {
                        HASH_SET_BITS(&device_data->base->cr,
                                      HASH_CR_DMAE_MASK);
                        HASH_SET_BITS(&device_data->base->cr,
                                      HASH_CR_PRIVN_MASK);
                }

                HASH_INITIALIZE;

                if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
                        hash_hw_write_key(device_data, ctx->key, ctx->keylen);

                /* Number of bits in last word = (nbytes * 8) % 32 */
                HASH_SET_NBLW((req->nbytes * 8) % 32);
                req_ctx->updated = 1;
        }

        /* Store the nents in the dma struct. */
        ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL);
        if (!ctx->device->dma.nents) {
                dev_err(device_data->dev, "%s: ctx->device->dma.nents = 0\n",
                        __func__);
                ret = ctx->device->dma.nents;
                goto out;
        }

        bytes_written = hash_dma_write(ctx, req->src, req->nbytes);
        if (bytes_written != req->nbytes) {
                dev_err(device_data->dev, "%s: hash_dma_write() failed!\n",
                        __func__);
                ret = bytes_written;
                goto out;
        }

        wait_for_completion(&ctx->device->dma.complete);
        hash_dma_done(ctx);

        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();

        if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
                unsigned int keylen = ctx->keylen;
                u8 *key = ctx->key;

                dev_dbg(device_data->dev, "%s: keylen: %d\n",
                        __func__, ctx->keylen);
                hash_hw_write_key(device_data, key, keylen);
        }

        hash_get_digest(device_data, digest, ctx->config.algorithm);
        memcpy(req->result, digest, ctx->digestsize);

out:
        release_hash_device(device_data);

        /**
         * Allocated in setkey, and only used in HMAC.
         */
        kfree(ctx->key);

        return ret;
}

/**
 * hash_hw_final - The final hash calculation function
 * @req:        The hash request for the job.
 */
static int hash_hw_final(struct ahash_request *req)
{
        int ret = 0;
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
        struct hash_device_data *device_data;
        u8 digest[SHA256_DIGEST_SIZE];

        ret = hash_get_device_data(ctx, &device_data);
        if (ret)
                return ret;

        dev_dbg(device_data->dev, "%s: (ctx=0x%x)!\n", __func__, (u32) ctx);

        if (req_ctx->updated) {
                ret = hash_resume_state(device_data, &device_data->state);

                if (ret) {
                        dev_err(device_data->dev,
                                "%s: hash_resume_state() failed!\n", __func__);
                        goto out;
                }
        } else if (req->nbytes == 0 && ctx->keylen == 0) {
                u8 zero_hash[SHA256_DIGEST_SIZE];
                u32 zero_hash_size = 0;
                bool zero_digest = false;
                /**
                 * Use a pre-calculated empty message digest
                 * (workaround since hw return zeroes, hw bug!?)
                 */
                ret = get_empty_message_digest(device_data, &zero_hash[0],
                                &zero_hash_size, &zero_digest);
                if (!ret && likely(zero_hash_size == ctx->digestsize) &&
                    zero_digest) {
                        memcpy(req->result, &zero_hash[0], ctx->digestsize);
                        goto out;
                } else if (!ret && !zero_digest) {
                        dev_dbg(device_data->dev,
                                "%s: HMAC zero msg with key, continue...\n",
                                __func__);
                } else {
                        dev_err(device_data->dev,
                                "%s: ret=%d, or wrong digest size? %s\n",
                                __func__, ret,
                                zero_hash_size == ctx->digestsize ?
                                "true" : "false");
                        /* Return error */
                        goto out;
                }
        } else if (req->nbytes == 0 && ctx->keylen > 0) {
                dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n",
                        __func__);
                goto out;
        }

        if (!req_ctx->updated) {
                ret = init_hash_hw(device_data, ctx);
                if (ret) {
                        dev_err(device_data->dev,
                                "%s: init_hash_hw() failed!\n", __func__);
                        goto out;
                }
        }

        if (req_ctx->state.index) {
                hash_messagepad(device_data, req_ctx->state.buffer,
                                req_ctx->state.index);
        } else {
                HASH_SET_DCAL;
                while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                        cpu_relax();
        }

        if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
                unsigned int keylen = ctx->keylen;
                u8 *key = ctx->key;

                dev_dbg(device_data->dev, "%s: keylen: %d\n",
                        __func__, ctx->keylen);
                hash_hw_write_key(device_data, key, keylen);
        }

        hash_get_digest(device_data, digest, ctx->config.algorithm);
        memcpy(req->result, digest, ctx->digestsize);

out:
        release_hash_device(device_data);

        /**
         * Allocated in setkey, and only used in HMAC.
         */
        kfree(ctx->key);

        return ret;
}

/**
 * hash_hw_update - Updates current HASH computation hashing another part of
 *                  the message.
 * @req:        Byte array containing the message to be hashed (caller
 *              allocated).
 */
int hash_hw_update(struct ahash_request *req)
{
        int ret = 0;
        u8 index = 0;
        u8 *buffer;
        struct hash_device_data *device_data;
        u8 *data_buffer;
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
        struct crypto_hash_walk walk;
        int msg_length = crypto_hash_walk_first(req, &walk);

        /* Empty message ("") is correct indata */
        if (msg_length == 0)
                return ret;

        index = req_ctx->state.index;
        buffer = (u8 *)req_ctx->state.buffer;

        /* Check if ctx->state.length + msg_length
           overflows */
        if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
            HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) {
                pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__);
                return -EPERM;
        }

        ret = hash_get_device_data(ctx, &device_data);
        if (ret)
                return ret;

        /* Main loop */
        while (0 != msg_length) {
                data_buffer = walk.data;
                ret = hash_process_data(device_data, ctx, req_ctx, msg_length,
                                data_buffer, buffer, &index);

                if (ret) {
                        dev_err(device_data->dev, "%s: hash_internal_hw_update() failed!\n",
                                __func__);
                        goto out;
                }

                msg_length = crypto_hash_walk_done(&walk, 0);
        }

        req_ctx->state.index = index;
        dev_dbg(device_data->dev, "%s: indata length=%d, bin=%d\n",
                __func__, req_ctx->state.index, req_ctx->state.bit_index);

out:
        release_hash_device(device_data);

        return ret;
}

/**
 * hash_resume_state - Function that resumes the state of an calculation.
 * @device_data:        Pointer to the device structure.
 * @device_state:       The state to be restored in the hash hardware
 */
int hash_resume_state(struct hash_device_data *device_data,
                      const struct hash_state *device_state)
{
        u32 temp_cr;
        s32 count;
        int hash_mode = HASH_OPER_MODE_HASH;

        if (NULL == device_state) {
                dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
                        __func__);
                return -EPERM;
        }

        /* Check correctness of index and length members */
        if (device_state->index > HASH_BLOCK_SIZE ||
            (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
                dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
                        __func__);
                return -EPERM;
        }

        /*
         * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
         * prepare the initialize the HASH accelerator to compute the message
         * digest of a new message.
         */
        HASH_INITIALIZE;

        temp_cr = device_state->temp_cr;
        writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);

        if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
                hash_mode = HASH_OPER_MODE_HMAC;
        else
                hash_mode = HASH_OPER_MODE_HASH;

        for (count = 0; count < HASH_CSR_COUNT; count++) {
                if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
                        break;

                writel_relaxed(device_state->csr[count],
                               &device_data->base->csrx[count]);
        }

        writel_relaxed(device_state->csfull, &device_data->base->csfull);
        writel_relaxed(device_state->csdatain, &device_data->base->csdatain);

        writel_relaxed(device_state->str_reg, &device_data->base->str);
        writel_relaxed(temp_cr, &device_data->base->cr);

        return 0;
}

/**
 * hash_save_state - Function that saves the state of hardware.
 * @device_data:        Pointer to the device structure.
 * @device_state:       The strucure where the hardware state should be saved.
 */
int hash_save_state(struct hash_device_data *device_data,
                    struct hash_state *device_state)
{
        u32 temp_cr;
        u32 count;
        int hash_mode = HASH_OPER_MODE_HASH;

        if (NULL == device_state) {
                dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
                        __func__);
                return -ENOTSUPP;
        }

        /* Write dummy value to force digest intermediate calculation. This
         * actually makes sure that there isn't any ongoing calculation in the
         * hardware.
         */
        while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
                cpu_relax();

        temp_cr = readl_relaxed(&device_data->base->cr);

        device_state->str_reg = readl_relaxed(&device_data->base->str);

        device_state->din_reg = readl_relaxed(&device_data->base->din);

        if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
                hash_mode = HASH_OPER_MODE_HMAC;
        else
                hash_mode = HASH_OPER_MODE_HASH;

        for (count = 0; count < HASH_CSR_COUNT; count++) {
                if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
                        break;

                device_state->csr[count] =
                        readl_relaxed(&device_data->base->csrx[count]);
        }

        device_state->csfull = readl_relaxed(&device_data->base->csfull);
        device_state->csdatain = readl_relaxed(&device_data->base->csdatain);

        device_state->temp_cr = temp_cr;

        return 0;
}

/**
 * hash_check_hw - This routine checks for peripheral Ids and PCell Ids.
 * @device_data:
 *
 */
int hash_check_hw(struct hash_device_data *device_data)
{
        /* Checking Peripheral Ids  */
        if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0) &&
            HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1) &&
            HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2) &&
            HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3) &&
            HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0) &&
            HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1) &&
            HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2) &&
            HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)) {
                return 0;
        }

        dev_err(device_data->dev, "%s: HASH_UNSUPPORTED_HW!\n", __func__);
        return -ENOTSUPP;
}

/**
 * hash_get_digest - Gets the digest.
 * @device_data:        Pointer to the device structure.
 * @digest:             User allocated byte array for the calculated digest.
 * @algorithm:          The algorithm in use.
 */
void hash_get_digest(struct hash_device_data *device_data,
                     u8 *digest, int algorithm)
{
        u32 temp_hx_val, count;
        int loop_ctr;

        if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) {
                dev_err(device_data->dev, "%s: Incorrect algorithm %d\n",
                        __func__, algorithm);
                return;
        }

        if (algorithm == HASH_ALGO_SHA1)
                loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32);
        else
                loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32);

        dev_dbg(device_data->dev, "%s: digest array:(0x%x)\n",
                __func__, (u32) digest);

        /* Copy result into digest array */
        for (count = 0; count < loop_ctr; count++) {
                temp_hx_val = readl_relaxed(&device_data->base->hx[count]);
                digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF);
                digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF);
                digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF);
                digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF);
        }
}

/**
 * hash_update - The hash update function for SHA1/SHA2 (SHA256).
 * @req: The hash request for the job.
 */
static int ahash_update(struct ahash_request *req)
{
        int ret = 0;
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);

        if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode)
                ret = hash_hw_update(req);
        /* Skip update for DMA, all data will be passed to DMA in final */

        if (ret) {
                pr_err("%s: hash_hw_update() failed!\n", __func__);
        }

        return ret;
}

/**
 * hash_final - The hash final function for SHA1/SHA2 (SHA256).
 * @req:        The hash request for the job.
 */
static int ahash_final(struct ahash_request *req)
{
        int ret = 0;
        struct hash_req_ctx *req_ctx = ahash_request_ctx(req);

        pr_debug("%s: data size: %d\n", __func__, req->nbytes);

        if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode)
                ret = hash_dma_final(req);
        else
                ret = hash_hw_final(req);

        if (ret) {
                pr_err("%s: hash_hw/dma_final() failed\n", __func__);
        }

        return ret;
}

static int hash_setkey(struct crypto_ahash *tfm,
                       const u8 *key, unsigned int keylen, int alg)
{
        int ret = 0;
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);

        /**
         * Freed in final.
         */
        ctx->key = kmemdup(key, keylen, GFP_KERNEL);
        if (!ctx->key) {
                pr_err("%s: Failed to allocate ctx->key for %d\n",
                       __func__, alg);
                return -ENOMEM;
        }
        ctx->keylen = keylen;

        return ret;
}

static int ahash_sha1_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);

        ctx->config.data_format = HASH_DATA_8_BITS;
        ctx->config.algorithm = HASH_ALGO_SHA1;
        ctx->config.oper_mode = HASH_OPER_MODE_HASH;
        ctx->digestsize = SHA1_DIGEST_SIZE;

        return hash_init(req);
}

static int ahash_sha256_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);

        ctx->config.data_format = HASH_DATA_8_BITS;
        ctx->config.algorithm = HASH_ALGO_SHA256;
        ctx->config.oper_mode = HASH_OPER_MODE_HASH;
        ctx->digestsize = SHA256_DIGEST_SIZE;

        return hash_init(req);
}

static int ahash_sha1_digest(struct ahash_request *req)
{
        int ret2, ret1;

        ret1 = ahash_sha1_init(req);
        if (ret1)
                goto out;

        ret1 = ahash_update(req);
        ret2 = ahash_final(req);

out:
        return ret1 ? ret1 : ret2;
}

static int ahash_sha256_digest(struct ahash_request *req)
{
        int ret2, ret1;

        ret1 = ahash_sha256_init(req);
        if (ret1)
                goto out;

        ret1 = ahash_update(req);
        ret2 = ahash_final(req);

out:
        return ret1 ? ret1 : ret2;
}

static int hmac_sha1_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);

        ctx->config.data_format = HASH_DATA_8_BITS;
        ctx->config.algorithm   = HASH_ALGO_SHA1;
        ctx->config.oper_mode   = HASH_OPER_MODE_HMAC;
        ctx->digestsize         = SHA1_DIGEST_SIZE;

        return hash_init(req);
}

static int hmac_sha256_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct hash_ctx *ctx = crypto_ahash_ctx(tfm);

        ctx->config.data_format = HASH_DATA_8_BITS;
        ctx->config.algorithm   = HASH_ALGO_SHA256;
        ctx->config.oper_mode   = HASH_OPER_MODE_HMAC;
        ctx->digestsize         = SHA256_DIGEST_SIZE;

        return hash_init(req);
}

static int hmac_sha1_digest(struct ahash_request *req)
{
        int ret2, ret1;

        ret1 = hmac_sha1_init(req);
        if (ret1)
                goto out;

        ret1 = ahash_update(req);
        ret2 = ahash_final(req);

out:
        return ret1 ? ret1 : ret2;
}

static int hmac_sha256_digest(struct ahash_request *req)
{
        int ret2, ret1;

        ret1 = hmac_sha256_init(req);
        if (ret1)
                goto out;

        ret1 = ahash_update(req);
        ret2 = ahash_final(req);

out:
        return ret1 ? ret1 : ret2;
}

static int hmac_sha1_setkey(struct crypto_ahash *tfm,
                            const u8 *key, unsigned int keylen)
{
        return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1);
}

static int hmac_sha256_setkey(struct crypto_ahash *tfm,
                              const u8 *key, unsigned int keylen)
{
        return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256);
}

struct hash_algo_template {
        struct hash_config conf;
        struct ahash_alg hash;
};

static int hash_cra_init(struct crypto_tfm *tfm)
{
        struct hash_ctx *ctx = crypto_tfm_ctx(tfm);
        struct crypto_alg *alg = tfm->__crt_alg;
        struct hash_algo_template *hash_alg;

        hash_alg = container_of(__crypto_ahash_alg(alg),
                        struct hash_algo_template,
                        hash);

        crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
                                 sizeof(struct hash_req_ctx));

        ctx->config.data_format = HASH_DATA_8_BITS;
        ctx->config.algorithm = hash_alg->conf.algorithm;
        ctx->config.oper_mode = hash_alg->conf.oper_mode;

        ctx->digestsize = hash_alg->hash.halg.digestsize;

        return 0;
}

static struct hash_algo_template hash_algs[] = {
        {
                .conf.algorithm = HASH_ALGO_SHA1,
                .conf.oper_mode = HASH_OPER_MODE_HASH,
                .hash = {
                        .init = hash_init,
                        .update = ahash_update,
                        .final = ahash_final,
                        .digest = ahash_sha1_digest,
                        .halg.digestsize = SHA1_DIGEST_SIZE,
                        .halg.statesize = sizeof(struct hash_ctx),
                        .halg.base = {
                                .cra_name = "sha1",
                                .cra_driver_name = "sha1-ux500",
                                .cra_flags = (CRYPTO_ALG_TYPE_AHASH |
                                              CRYPTO_ALG_ASYNC),
                                .cra_blocksize = SHA1_BLOCK_SIZE,
                                .cra_ctxsize = sizeof(struct hash_ctx),
                                .cra_init = hash_cra_init,
                                .cra_module = THIS_MODULE,
                        }
                }
        },
        {
                .conf.algorithm = HASH_ALGO_SHA256,
                .conf.oper_mode = HASH_OPER_MODE_HASH,
                .hash = {
                        .init = hash_init,
                        .update = ahash_update,
                        .final = ahash_final,
                        .digest = ahash_sha256_digest,
                        .halg.digestsize = SHA256_DIGEST_SIZE,
                        .halg.statesize = sizeof(struct hash_ctx),
                        .halg.base = {
                                .cra_name = "sha256",
                                .cra_driver_name = "sha256-ux500",
                                .cra_flags = (CRYPTO_ALG_TYPE_AHASH |
                                              CRYPTO_ALG_ASYNC),
                                .cra_blocksize = SHA256_BLOCK_SIZE,
                                .cra_ctxsize = sizeof(struct hash_ctx),
                                .cra_type = &crypto_ahash_type,
                                .cra_init = hash_cra_init,
                                .cra_module = THIS_MODULE,
                        }
                }
        },
        {
                .conf.algorithm = HASH_ALGO_SHA1,
                .conf.oper_mode = HASH_OPER_MODE_HMAC,
                        .hash = {
                        .init = hash_init,
                        .update = ahash_update,
                        .final = ahash_final,
                        .digest = hmac_sha1_digest,
                        .setkey = hmac_sha1_setkey,
                        .halg.digestsize = SHA1_DIGEST_SIZE,
                        .halg.statesize = sizeof(struct hash_ctx),
                        .halg.base = {
                                .cra_name = "hmac(sha1)",
                                .cra_driver_name = "hmac-sha1-ux500",
                                .cra_flags = (CRYPTO_ALG_TYPE_AHASH |
                                              CRYPTO_ALG_ASYNC),
                                .cra_blocksize = SHA1_BLOCK_SIZE,
                                .cra_ctxsize = sizeof(struct hash_ctx),
                                .cra_type = &crypto_ahash_type,
                                .cra_init = hash_cra_init,
                                .cra_module = THIS_MODULE,
                        }
                }
        },
        {
                .conf.algorithm = HASH_ALGO_SHA256,
                .conf.oper_mode = HASH_OPER_MODE_HMAC,
                .hash = {
                        .init = hash_init,
                        .update = ahash_update,
                        .final = ahash_final,
                        .digest = hmac_sha256_digest,
                        .setkey = hmac_sha256_setkey,
                        .halg.digestsize = SHA256_DIGEST_SIZE,
                        .halg.statesize = sizeof(struct hash_ctx),
                        .halg.base = {
                                .cra_name = "hmac(sha256)",
                                .cra_driver_name = "hmac-sha256-ux500",
                                .cra_flags = (CRYPTO_ALG_TYPE_AHASH |
                                              CRYPTO_ALG_ASYNC),
                                .cra_blocksize = SHA256_BLOCK_SIZE,
                                .cra_ctxsize = sizeof(struct hash_ctx),
                                .cra_type = &crypto_ahash_type,
                                .cra_init = hash_cra_init,
                                .cra_module = THIS_MODULE,
                        }
                }
        }
};

/**
 * hash_algs_register_all -
 */
static int ahash_algs_register_all(struct hash_device_data *device_data)
{
        int ret;
        int i;
        int count;

        for (i = 0; i < ARRAY_SIZE(hash_algs); i++) {
                ret = crypto_register_ahash(&hash_algs[i].hash);
                if (ret) {
                        count = i;
                        dev_err(device_data->dev, "%s: alg registration failed\n",
                                hash_algs[i].hash.halg.base.cra_driver_name);
                        goto unreg;
                }
        }
        return 0;
unreg:
        for (i = 0; i < count; i++)
                crypto_unregister_ahash(&hash_algs[i].hash);
        return ret;
}

/**
 * hash_algs_unregister_all -
 */
static void ahash_algs_unregister_all(struct hash_device_data *device_data)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(hash_algs); i++)
                crypto_unregister_ahash(&hash_algs[i].hash);
}

/**
 * ux500_hash_probe - Function that probes the hash hardware.
 * @pdev: The platform device.
 */
static int ux500_hash_probe(struct platform_device *pdev)
{
        int                     ret = 0;
        struct resource         *res = NULL;
        struct hash_device_data *device_data;
        struct device           *dev = &pdev->dev;

        device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_ATOMIC);
        if (!device_data) {
                ret = -ENOMEM;
                goto out;
        }

        device_data->dev = dev;
        device_data->current_ctx = NULL;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                dev_dbg(dev, "%s: platform_get_resource() failed!\n", __func__);
                ret = -ENODEV;
                goto out;
        }

        device_data->phybase = res->start;
        device_data->base = devm_ioremap_resource(dev, res);
        if (IS_ERR(device_data->base)) {
                dev_err(dev, "%s: ioremap() failed!\n", __func__);
                ret = PTR_ERR(device_data->base);
                goto out;
        }
        spin_lock_init(&device_data->ctx_lock);
        spin_lock_init(&device_data->power_state_lock);

        /* Enable power for HASH1 hardware block */
        device_data->regulator = regulator_get(dev, "v-ape");
        if (IS_ERR(device_data->regulator)) {
                dev_err(dev, "%s: regulator_get() failed!\n", __func__);
                ret = PTR_ERR(device_data->regulator);
                device_data->regulator = NULL;
                goto out;
        }

        /* Enable the clock for HASH1 hardware block */
        device_data->clk = devm_clk_get(dev, NULL);
        if (IS_ERR(device_data->clk)) {
                dev_err(dev, "%s: clk_get() failed!\n", __func__);
                ret = PTR_ERR(device_data->clk);
                goto out_regulator;
        }

        ret = clk_prepare(device_data->clk);
        if (ret) {
                dev_err(dev, "%s: clk_prepare() failed!\n", __func__);
                goto out_regulator;
        }

        /* Enable device power (and clock) */
        ret = hash_enable_power(device_data, false);
        if (ret) {
                dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
                goto out_clk_unprepare;
        }

        ret = hash_check_hw(device_data);
        if (ret) {
                dev_err(dev, "%s: hash_check_hw() failed!\n", __func__);
                goto out_power;
        }

        if (hash_mode == HASH_MODE_DMA)
                hash_dma_setup_channel(device_data, dev);

        platform_set_drvdata(pdev, device_data);

        /* Put the new device into the device list... */
        klist_add_tail(&device_data->list_node, &driver_data.device_list);
        /* ... and signal that a new device is available. */
        up(&driver_data.device_allocation);

        ret = ahash_algs_register_all(device_data);
        if (ret) {
                dev_err(dev, "%s: ahash_algs_register_all() failed!\n",
                        __func__);
                goto out_power;
        }

        dev_info(dev, "successfully registered\n");
        return 0;

out_power:
        hash_disable_power(device_data, false);

out_clk_unprepare:
        clk_unprepare(device_data->clk);

out_regulator:
        regulator_put(device_data->regulator);

out:
        return ret;
}

/**
 * ux500_hash_remove - Function that removes the hash device from the platform.
 * @pdev: The platform device.
 */
static int ux500_hash_remove(struct platform_device *pdev)
{
        struct hash_device_data *device_data;
        struct device           *dev = &pdev->dev;

        device_data = platform_get_drvdata(pdev);
        if (!device_data) {
                dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
                return -ENOMEM;
        }

        /* Try to decrease the number of available devices. */
        if (down_trylock(&driver_data.device_allocation))
                return -EBUSY;

        /* Check that the device is free */
        spin_lock(&device_data->ctx_lock);
        /* current_ctx allocates a device, NULL = unallocated */
        if (device_data->current_ctx) {
                /* The device is busy */
                spin_unlock(&device_data->ctx_lock);
                /* Return the device to the pool. */
                up(&driver_data.device_allocation);
                return -EBUSY;
        }

        spin_unlock(&device_data->ctx_lock);

        /* Remove the device from the list */
        if (klist_node_attached(&device_data->list_node))
                klist_remove(&device_data->list_node);

        /* If this was the last device, remove the services */
        if (list_empty(&driver_data.device_list.k_list))
                ahash_algs_unregister_all(device_data);

        if (hash_disable_power(device_data, false))
                dev_err(dev, "%s: hash_disable_power() failed\n",
                        __func__);

        clk_unprepare(device_data->clk);
        regulator_put(device_data->regulator);

        return 0;
}

/**
 * ux500_hash_shutdown - Function that shutdown the hash device.
 * @pdev: The platform device
 */
static void ux500_hash_shutdown(struct platform_device *pdev)
{
        struct hash_device_data *device_data;

        device_data = platform_get_drvdata(pdev);
        if (!device_data) {
                dev_err(&pdev->dev, "%s: platform_get_drvdata() failed!\n",
                        __func__);
                return;
        }

        /* Check that the device is free */
        spin_lock(&device_data->ctx_lock);
        /* current_ctx allocates a device, NULL = unallocated */
        if (!device_data->current_ctx) {
                if (down_trylock(&driver_data.device_allocation))
                        dev_dbg(&pdev->dev, "%s: Cryp still in use! Shutting down anyway...\n",
                                __func__);
                /**
                 * (Allocate the device)
                 * Need to set this to non-null (dummy) value,
                 * to avoid usage if context switching.
                 */
                device_data->current_ctx++;
        }
        spin_unlock(&device_data->ctx_lock);

        /* Remove the device from the list */
        if (klist_node_attached(&device_data->list_node))
                klist_remove(&device_data->list_node);

        /* If this was the last device, remove the services */
        if (list_empty(&driver_data.device_list.k_list))
                ahash_algs_unregister_all(device_data);

        if (hash_disable_power(device_data, false))
                dev_err(&pdev->dev, "%s: hash_disable_power() failed\n",
                        __func__);
}

#ifdef CONFIG_PM_SLEEP
/**
 * ux500_hash_suspend - Function that suspends the hash device.
 * @dev:        Device to suspend.
 */
static int ux500_hash_suspend(struct device *dev)
{
        int ret;
        struct hash_device_data *device_data;
        struct hash_ctx *temp_ctx = NULL;

        device_data = dev_get_drvdata(dev);
        if (!device_data) {
                dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
                return -ENOMEM;
        }

        spin_lock(&device_data->ctx_lock);
        if (!device_data->current_ctx)
                device_data->current_ctx++;
        spin_unlock(&device_data->ctx_lock);

        if (device_data->current_ctx == ++temp_ctx) {
                if (down_interruptible(&driver_data.device_allocation))
                        dev_dbg(dev, "%s: down_interruptible() failed\n",
                                __func__);
                ret = hash_disable_power(device_data, false);

        } else {
                ret = hash_disable_power(device_data, true);
        }

        if (ret)
                dev_err(dev, "%s: hash_disable_power()\n", __func__);

        return ret;
}

/**
 * ux500_hash_resume - Function that resume the hash device.
 * @dev:        Device to resume.
 */
static int ux500_hash_resume(struct device *dev)
{
        int ret = 0;
        struct hash_device_data *device_data;
        struct hash_ctx *temp_ctx = NULL;

        device_data = dev_get_drvdata(dev);
        if (!device_data) {
                dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
                return -ENOMEM;
        }

        spin_lock(&device_data->ctx_lock);
        if (device_data->current_ctx == ++temp_ctx)
                device_data->current_ctx = NULL;
        spin_unlock(&device_data->ctx_lock);

        if (!device_data->current_ctx)
                up(&driver_data.device_allocation);
        else
                ret = hash_enable_power(device_data, true);

        if (ret)
                dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);

        return ret;
}
#endif

static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);

static const struct of_device_id ux500_hash_match[] = {
        { .compatible = "stericsson,ux500-hash" },
        { },
};
MODULE_DEVICE_TABLE(of, ux500_hash_match);

static struct platform_driver hash_driver = {
        .probe  = ux500_hash_probe,
        .remove = ux500_hash_remove,
        .shutdown = ux500_hash_shutdown,
        .driver = {
                .name  = "hash1",
                .of_match_table = ux500_hash_match,
                .pm    = &ux500_hash_pm,
        }
};

/**
 * ux500_hash_mod_init - The kernel module init function.
 */
static int __init ux500_hash_mod_init(void)
{
        klist_init(&driver_data.device_list, NULL, NULL);
        /* Initialize the semaphore to 0 devices (locked state) */
        sema_init(&driver_data.device_allocation, 0);

        return platform_driver_register(&hash_driver);
}

/**
 * ux500_hash_mod_fini - The kernel module exit function.
 */
static void __exit ux500_hash_mod_fini(void)
{
        platform_driver_unregister(&hash_driver);
}

module_init(ux500_hash_mod_init);
module_exit(ux500_hash_mod_fini);

MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
MODULE_LICENSE("GPL");

MODULE_ALIAS_CRYPTO("sha1-all");
MODULE_ALIAS_CRYPTO("sha256-all");
MODULE_ALIAS_CRYPTO("hmac-sha1-all");
MODULE_ALIAS_CRYPTO("hmac-sha256-all");