powerpc/mm/4k: don't allocate larger pmd page table for 4k

[linux/fpc-iii.git] / tools / perf / Documentation / perf-report.txt

perf-report(1)
==============

NAME
----
perf-report - Read perf.data (created by perf record) and display the profile

SYNOPSIS
--------
[verse]
'perf report' [-i <file> | --input=file]

DESCRIPTION
-----------
This command displays the performance counter profile information recorded
via perf record.

OPTIONS
-------
-i::
--input=::
        Input file name. (default: perf.data unless stdin is a fifo)

-v::
--verbose::
        Be more verbose. (show symbol address, etc)

-n::
--show-nr-samples::
        Show the number of samples for each symbol

--show-cpu-utilization::
        Show sample percentage for different cpu modes.

-T::
--threads::
        Show per-thread event counters.  The input data file should be recorded
        with -s option.
-c::
--comms=::
        Only consider symbols in these comms. CSV that understands
        file://filename entries.  This option will affect the percentage of
        the overhead column.  See --percentage for more info.
--pid=::
        Only show events for given process ID (comma separated list).

--tid=::
        Only show events for given thread ID (comma separated list).
-d::
--dsos=::
        Only consider symbols in these dsos. CSV that understands
        file://filename entries.  This option will affect the percentage of
        the overhead column.  See --percentage for more info.
-S::
--symbols=::
        Only consider these symbols. CSV that understands
        file://filename entries.  This option will affect the percentage of
        the overhead column.  See --percentage for more info.

--symbol-filter=::
        Only show symbols that match (partially) with this filter.

-U::
--hide-unresolved::
        Only display entries resolved to a symbol.

-s::
--sort=::
        Sort histogram entries by given key(s) - multiple keys can be specified
        in CSV format.  Following sort keys are available:
        pid, comm, dso, symbol, parent, cpu, socket, srcline, weight, local_weight.

        Each key has following meaning:

        - comm: command (name) of the task which can be read via /proc/<pid>/comm
        - pid: command and tid of the task
        - dso: name of library or module executed at the time of sample
        - symbol: name of function executed at the time of sample
        - parent: name of function matched to the parent regex filter. Unmatched
        entries are displayed as "[other]".
        - cpu: cpu number the task ran at the time of sample
        - socket: processor socket number the task ran at the time of sample
        - srcline: filename and line number executed at the time of sample.  The
        DWARF debugging info must be provided.
        - srcfile: file name of the source file of the same. Requires dwarf
        information.
        - weight: Event specific weight, e.g. memory latency or transaction
        abort cost. This is the global weight.
        - local_weight: Local weight version of the weight above.
        - transaction: Transaction abort flags.
        - overhead: Overhead percentage of sample
        - overhead_sys: Overhead percentage of sample running in system mode
        - overhead_us: Overhead percentage of sample running in user mode
        - overhead_guest_sys: Overhead percentage of sample running in system mode
        on guest machine
        - overhead_guest_us: Overhead percentage of sample running in user mode on
        guest machine
        - sample: Number of sample
        - period: Raw number of event count of sample

        By default, comm, dso and symbol keys are used.
        (i.e. --sort comm,dso,symbol)

        If --branch-stack option is used, following sort keys are also
        available:

        - dso_from: name of library or module branched from
        - dso_to: name of library or module branched to
        - symbol_from: name of function branched from
        - symbol_to: name of function branched to
        - srcline_from: source file and line branched from
        - srcline_to: source file and line branched to
        - mispredict: "N" for predicted branch, "Y" for mispredicted branch
        - in_tx: branch in TSX transaction
        - abort: TSX transaction abort.
        - cycles: Cycles in basic block

        And default sort keys are changed to comm, dso_from, symbol_from, dso_to
        and symbol_to, see '--branch-stack'.

        If the --mem-mode option is used, the following sort keys are also available
        (incompatible with --branch-stack):
        symbol_daddr, dso_daddr, locked, tlb, mem, snoop, dcacheline.

        - symbol_daddr: name of data symbol being executed on at the time of sample
        - dso_daddr: name of library or module containing the data being executed
        on at the time of the sample
        - locked: whether the bus was locked at the time of the sample
        - tlb: type of tlb access for the data at the time of the sample
        - mem: type of memory access for the data at the time of the sample
        - snoop: type of snoop (if any) for the data at the time of the sample
        - dcacheline: the cacheline the data address is on at the time of the sample

        And the default sort keys are changed to local_weight, mem, sym, dso,
        symbol_daddr, dso_daddr, snoop, tlb, locked, see '--mem-mode'.

        If the data file has tracepoint event(s), following (dynamic) sort keys
        are also available:
        trace, trace_fields, [<event>.]<field>[/raw]

        - trace: pretty printed trace output in a single column
        - trace_fields: fields in tracepoints in separate columns
        - <field name>: optional event and field name for a specific field

        The last form consists of event and field names.  If event name is
        omitted, it searches all events for matching field name.  The matched
        field will be shown only for the event has the field.  The event name
        supports substring match so user doesn't need to specify full subsystem
        and event name everytime.  For example, 'sched:sched_switch' event can
        be shortened to 'switch' as long as it's not ambiguous.  Also event can
        be specified by its index (starting from 1) preceded by the '%'.
        So '%1' is the first event, '%2' is the second, and so on.

        The field name can have '/raw' suffix which disables pretty printing
        and shows raw field value like hex numbers.  The --raw-trace option
        has the same effect for all dynamic sort keys.

        The default sort keys are changed to 'trace' if all events in the data
        file are tracepoint.

-F::
--fields=::
        Specify output field - multiple keys can be specified in CSV format.
        Following fields are available:
        overhead, overhead_sys, overhead_us, overhead_children, sample and period.
        Also it can contain any sort key(s).

        By default, every sort keys not specified in -F will be appended
        automatically.

-p::
--parent=<regex>::
        A regex filter to identify parent. The parent is a caller of this
        function and searched through the callchain, thus it requires callchain
        information recorded. The pattern is in the exteneded regex format and
        defaults to "\^sys_|^do_page_fault", see '--sort parent'.

-x::
--exclude-other::
        Only display entries with parent-match.

-w::
--column-widths=<width[,width...]>::
        Force each column width to the provided list, for large terminal
        readability.  0 means no limit (default behavior).

-t::
--field-separator=::
        Use a special separator character and don't pad with spaces, replacing
        all occurrences of this separator in symbol names (and other output)
        with a '.' character, that thus it's the only non valid separator.

-D::
--dump-raw-trace::
        Dump raw trace in ASCII.

-g::
--call-graph=<print_type,threshold[,print_limit],order,sort_key[,branch],value>::
        Display call chains using type, min percent threshold, print limit,
        call order, sort key, optional branch and value.  Note that ordering of
        parameters is not fixed so any parement can be given in an arbitraty order.
        One exception is the print_limit which should be preceded by threshold.

        print_type can be either:
        - flat: single column, linear exposure of call chains.
        - graph: use a graph tree, displaying absolute overhead rates. (default)
        - fractal: like graph, but displays relative rates. Each branch of
                 the tree is considered as a new profiled object.
        - folded: call chains are displayed in a line, separated by semicolons
        - none: disable call chain display.

        threshold is a percentage value which specifies a minimum percent to be
        included in the output call graph.  Default is 0.5 (%).

        print_limit is only applied when stdio interface is used.  It's to limit
        number of call graph entries in a single hist entry.  Note that it needs
        to be given after threshold (but not necessarily consecutive).
        Default is 0 (unlimited).

        order can be either:
        - callee: callee based call graph.
        - caller: inverted caller based call graph.
        Default is 'caller' when --children is used, otherwise 'callee'.

        sort_key can be:
        - function: compare on functions (default)
        - address: compare on individual code addresses

        branch can be:
        - branch: include last branch information in callgraph when available.
                  Usually more convenient to use --branch-history for this.

        value can be:
        - percent: diplay overhead percent (default)
        - period: display event period
        - count: display event count

--children::
        Accumulate callchain of children to parent entry so that then can
        show up in the output.  The output will have a new "Children" column
        and will be sorted on the data.  It requires callchains are recorded.
        See the `overhead calculation' section for more details. Enabled by
        default, disable with --no-children.

--max-stack::
        Set the stack depth limit when parsing the callchain, anything
        beyond the specified depth will be ignored. This is a trade-off
        between information loss and faster processing especially for
        workloads that can have a very long callchain stack.
        Note that when using the --itrace option the synthesized callchain size
        will override this value if the synthesized callchain size is bigger.

        Default: 127

-G::
--inverted::
        alias for inverted caller based call graph.

--ignore-callees=<regex>::
        Ignore callees of the function(s) matching the given regex.
        This has the effect of collecting the callers of each such
        function into one place in the call-graph tree.

--pretty=<key>::
        Pretty printing style.  key: normal, raw

--stdio:: Use the stdio interface.

--stdio-color::
        'always', 'never' or 'auto', allowing configuring color output
        via the command line, in addition to via "color.ui" .perfconfig.
        Use '--stdio-color always' to generate color even when redirecting
        to a pipe or file. Using just '--stdio-color' is equivalent to
        using 'always'.

--tui:: Use the TUI interface, that is integrated with annotate and allows
        zooming into DSOs or threads, among other features. Use of --tui
        requires a tty, if one is not present, as when piping to other
        commands, the stdio interface is used.

--gtk:: Use the GTK2 interface.

-k::
--vmlinux=<file>::
        vmlinux pathname

--kallsyms=<file>::
        kallsyms pathname

-m::
--modules::
        Load module symbols. WARNING: This should only be used with -k and
        a LIVE kernel.

-f::
--force::
        Don't do ownership validation.

--symfs=<directory>::
        Look for files with symbols relative to this directory.

-C::
--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
        be provided as a comma-separated list with no space: 0,1. Ranges of
        CPUs are specified with -: 0-2. Default is to report samples on all
        CPUs.

-M::
--disassembler-style=:: Set disassembler style for objdump.

--source::
        Interleave source code with assembly code. Enabled by default,
        disable with --no-source.

--asm-raw::
        Show raw instruction encoding of assembly instructions.

--show-total-period:: Show a column with the sum of periods.

-I::
--show-info::
        Display extended information about the perf.data file. This adds
        information which may be very large and thus may clutter the display.
        It currently includes: cpu and numa topology of the host system.

-b::
--branch-stack::
        Use the addresses of sampled taken branches instead of the instruction
        address to build the histograms. To generate meaningful output, the
        perf.data file must have been obtained using perf record -b or
        perf record --branch-filter xxx where xxx is a branch filter option.
        perf report is able to auto-detect whether a perf.data file contains
        branch stacks and it will automatically switch to the branch view mode,
        unless --no-branch-stack is used.

--branch-history::
        Add the addresses of sampled taken branches to the callstack.
        This allows to examine the path the program took to each sample.
        The data collection must have used -b (or -j) and -g.

--objdump=<path>::
        Path to objdump binary.

--group::
        Show event group information together.

--demangle::
        Demangle symbol names to human readable form. It's enabled by default,
        disable with --no-demangle.

--demangle-kernel::
        Demangle kernel symbol names to human readable form (for C++ kernels).

--mem-mode::
        Use the data addresses of samples in addition to instruction addresses
        to build the histograms.  To generate meaningful output, the perf.data
        file must have been obtained using perf record -d -W and using a
        special event -e cpu/mem-loads/ or -e cpu/mem-stores/. See
        'perf mem' for simpler access.

--percent-limit::
        Do not show entries which have an overhead under that percent.
        (Default: 0).  Note that this option also sets the percent limit (threshold)
        of callchains.  However the default value of callchain threshold is
        different than the default value of hist entries.  Please see the
        --call-graph option for details.

--percentage::
        Determine how to display the overhead percentage of filtered entries.
        Filters can be applied by --comms, --dsos and/or --symbols options and
        Zoom operations on the TUI (thread, dso, etc).

        "relative" means it's relative to filtered entries only so that the
        sum of shown entries will be always 100%.  "absolute" means it retains
        the original value before and after the filter is applied.

--header::
        Show header information in the perf.data file.  This includes
        various information like hostname, OS and perf version, cpu/mem
        info, perf command line, event list and so on.  Currently only
        --stdio output supports this feature.

--header-only::
        Show only perf.data header (forces --stdio).

--time::
        Only analyze samples within given time window: <start>,<stop>. Times
        have the format seconds.microseconds. If start is not given (i.e., time
        string is ',x.y') then analysis starts at the beginning of the file. If
        stop time is not given (i.e, time string is 'x.y,') then analysis goes
        to end of file.

--itrace::
        Options for decoding instruction tracing data. The options are:

include::itrace.txt[]

        To disable decoding entirely, use --no-itrace.

--full-source-path::
        Show the full path for source files for srcline output.

--show-ref-call-graph::
        When multiple events are sampled, it may not be needed to collect
        callgraphs for all of them. The sample sites are usually nearby,
        and it's enough to collect the callgraphs on a reference event.
        So user can use "call-graph=no" event modifier to disable callgraph
        for other events to reduce the overhead.
        However, perf report cannot show callgraphs for the event which
        disable the callgraph.
        This option extends the perf report to show reference callgraphs,
        which collected by reference event, in no callgraph event.

--socket-filter::
        Only report the samples on the processor socket that match with this filter

--raw-trace::
        When displaying traceevent output, do not use print fmt or plugins.

--hierarchy::
        Enable hierarchical output.

include::callchain-overhead-calculation.txt[]

SEE ALSO
--------
linkperf:perf-stat[1], linkperf:perf-annotate[1]