4 * Copyright (c) 1999-2002 Vojtech Pavlik
5 * Copyright (c) 2003-2004 Dmitry Torokhov
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License version 2 as published by
11 * the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/module.h>
16 #include <linux/moduleparam.h>
17 #include <linux/slab.h>
18 #include <linux/interrupt.h>
19 #include <linux/input.h>
20 #include <linux/serio.h>
21 #include <linux/init.h>
22 #include <linux/libps2.h>
23 #include <linux/mutex.h>
26 #include "synaptics.h"
27 #include "logips2pp.h"
30 #include "trackpoint.h"
32 #define DRIVER_DESC "PS/2 mouse driver"
34 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
35 MODULE_DESCRIPTION(DRIVER_DESC
);
36 MODULE_LICENSE("GPL");
38 static unsigned int psmouse_max_proto
= PSMOUSE_AUTO
;
39 static int psmouse_set_maxproto(const char *val
, struct kernel_param
*kp
);
40 static int psmouse_get_maxproto(char *buffer
, struct kernel_param
*kp
);
41 #define param_check_proto_abbrev(name, p) __param_check(name, p, unsigned int)
42 #define param_set_proto_abbrev psmouse_set_maxproto
43 #define param_get_proto_abbrev psmouse_get_maxproto
44 module_param_named(proto
, psmouse_max_proto
, proto_abbrev
, 0644);
45 MODULE_PARM_DESC(proto
, "Highest protocol extension to probe (bare, imps, exps, any). Useful for KVM switches.");
47 static unsigned int psmouse_resolution
= 200;
48 module_param_named(resolution
, psmouse_resolution
, uint
, 0644);
49 MODULE_PARM_DESC(resolution
, "Resolution, in dpi.");
51 static unsigned int psmouse_rate
= 100;
52 module_param_named(rate
, psmouse_rate
, uint
, 0644);
53 MODULE_PARM_DESC(rate
, "Report rate, in reports per second.");
55 static unsigned int psmouse_smartscroll
= 1;
56 module_param_named(smartscroll
, psmouse_smartscroll
, bool, 0644);
57 MODULE_PARM_DESC(smartscroll
, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
59 static unsigned int psmouse_resetafter
= 5;
60 module_param_named(resetafter
, psmouse_resetafter
, uint
, 0644);
61 MODULE_PARM_DESC(resetafter
, "Reset device after so many bad packets (0 = never).");
63 static unsigned int psmouse_resync_time
;
64 module_param_named(resync_time
, psmouse_resync_time
, uint
, 0644);
65 MODULE_PARM_DESC(resync_time
, "How long can mouse stay idle before forcing resync (in seconds, 0 = never).");
67 PSMOUSE_DEFINE_ATTR(protocol
, S_IWUSR
| S_IRUGO
,
69 psmouse_attr_show_protocol
, psmouse_attr_set_protocol
);
70 PSMOUSE_DEFINE_ATTR(rate
, S_IWUSR
| S_IRUGO
,
71 (void *) offsetof(struct psmouse
, rate
),
72 psmouse_show_int_attr
, psmouse_attr_set_rate
);
73 PSMOUSE_DEFINE_ATTR(resolution
, S_IWUSR
| S_IRUGO
,
74 (void *) offsetof(struct psmouse
, resolution
),
75 psmouse_show_int_attr
, psmouse_attr_set_resolution
);
76 PSMOUSE_DEFINE_ATTR(resetafter
, S_IWUSR
| S_IRUGO
,
77 (void *) offsetof(struct psmouse
, resetafter
),
78 psmouse_show_int_attr
, psmouse_set_int_attr
);
79 PSMOUSE_DEFINE_ATTR(resync_time
, S_IWUSR
| S_IRUGO
,
80 (void *) offsetof(struct psmouse
, resync_time
),
81 psmouse_show_int_attr
, psmouse_set_int_attr
);
83 static struct attribute
*psmouse_attributes
[] = {
84 &psmouse_attr_protocol
.dattr
.attr
,
85 &psmouse_attr_rate
.dattr
.attr
,
86 &psmouse_attr_resolution
.dattr
.attr
,
87 &psmouse_attr_resetafter
.dattr
.attr
,
88 &psmouse_attr_resync_time
.dattr
.attr
,
92 static struct attribute_group psmouse_attribute_group
= {
93 .attrs
= psmouse_attributes
,
97 * psmouse_mutex protects all operations changing state of mouse
98 * (connecting, disconnecting, changing rate or resolution via
99 * sysfs). We could use a per-device semaphore but since there
100 * rarely more than one PS/2 mouse connected and since semaphore
101 * is taken in "slow" paths it is not worth it.
103 static DEFINE_MUTEX(psmouse_mutex
);
105 static struct workqueue_struct
*kpsmoused_wq
;
107 struct psmouse_protocol
{
108 enum psmouse_type type
;
112 int (*detect
)(struct psmouse
*, int);
113 int (*init
)(struct psmouse
*);
117 * psmouse_process_byte() analyzes the PS/2 data stream and reports
118 * relevant events to the input module once full packet has arrived.
121 static psmouse_ret_t
psmouse_process_byte(struct psmouse
*psmouse
)
123 struct input_dev
*dev
= psmouse
->dev
;
124 unsigned char *packet
= psmouse
->packet
;
126 if (psmouse
->pktcnt
< psmouse
->pktsize
)
127 return PSMOUSE_GOOD_DATA
;
130 * Full packet accumulated, process it
134 * Scroll wheel on IntelliMice, scroll buttons on NetMice
137 if (psmouse
->type
== PSMOUSE_IMPS
|| psmouse
->type
== PSMOUSE_GENPS
)
138 input_report_rel(dev
, REL_WHEEL
, -(signed char) packet
[3]);
141 * Scroll wheel and buttons on IntelliMouse Explorer
144 if (psmouse
->type
== PSMOUSE_IMEX
) {
145 switch (packet
[3] & 0xC0) {
146 case 0x80: /* vertical scroll on IntelliMouse Explorer 4.0 */
147 input_report_rel(dev
, REL_WHEEL
, (int) (packet
[3] & 32) - (int) (packet
[3] & 31));
149 case 0x40: /* horizontal scroll on IntelliMouse Explorer 4.0 */
150 input_report_rel(dev
, REL_HWHEEL
, (int) (packet
[3] & 32) - (int) (packet
[3] & 31));
154 input_report_rel(dev
, REL_WHEEL
, (int) (packet
[3] & 8) - (int) (packet
[3] & 7));
155 input_report_key(dev
, BTN_SIDE
, (packet
[3] >> 4) & 1);
156 input_report_key(dev
, BTN_EXTRA
, (packet
[3] >> 5) & 1);
162 * Extra buttons on Genius NewNet 3D
165 if (psmouse
->type
== PSMOUSE_GENPS
) {
166 input_report_key(dev
, BTN_SIDE
, (packet
[0] >> 6) & 1);
167 input_report_key(dev
, BTN_EXTRA
, (packet
[0] >> 7) & 1);
171 * Extra button on ThinkingMouse
173 if (psmouse
->type
== PSMOUSE_THINKPS
) {
174 input_report_key(dev
, BTN_EXTRA
, (packet
[0] >> 3) & 1);
175 /* Without this bit of weirdness moving up gives wildly high Y changes. */
176 packet
[1] |= (packet
[0] & 0x40) << 1;
183 input_report_key(dev
, BTN_LEFT
, packet
[0] & 1);
184 input_report_key(dev
, BTN_MIDDLE
, (packet
[0] >> 2) & 1);
185 input_report_key(dev
, BTN_RIGHT
, (packet
[0] >> 1) & 1);
187 input_report_rel(dev
, REL_X
, packet
[1] ? (int) packet
[1] - (int) ((packet
[0] << 4) & 0x100) : 0);
188 input_report_rel(dev
, REL_Y
, packet
[2] ? (int) ((packet
[0] << 3) & 0x100) - (int) packet
[2] : 0);
192 return PSMOUSE_FULL_PACKET
;
196 * __psmouse_set_state() sets new psmouse state and resets all flags.
199 static inline void __psmouse_set_state(struct psmouse
*psmouse
, enum psmouse_state new_state
)
201 psmouse
->state
= new_state
;
202 psmouse
->pktcnt
= psmouse
->out_of_sync
= 0;
203 psmouse
->ps2dev
.flags
= 0;
204 psmouse
->last
= jiffies
;
209 * psmouse_set_state() sets new psmouse state and resets all flags and
210 * counters while holding serio lock so fighting with interrupt handler
214 static void psmouse_set_state(struct psmouse
*psmouse
, enum psmouse_state new_state
)
216 serio_pause_rx(psmouse
->ps2dev
.serio
);
217 __psmouse_set_state(psmouse
, new_state
);
218 serio_continue_rx(psmouse
->ps2dev
.serio
);
222 * psmouse_handle_byte() processes one byte of the input data stream
223 * by calling corresponding protocol handler.
226 static int psmouse_handle_byte(struct psmouse
*psmouse
)
228 psmouse_ret_t rc
= psmouse
->protocol_handler(psmouse
);
231 case PSMOUSE_BAD_DATA
:
232 if (psmouse
->state
== PSMOUSE_ACTIVATED
) {
233 printk(KERN_WARNING
"psmouse.c: %s at %s lost sync at byte %d\n",
234 psmouse
->name
, psmouse
->phys
, psmouse
->pktcnt
);
235 if (++psmouse
->out_of_sync
== psmouse
->resetafter
) {
236 __psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
237 printk(KERN_NOTICE
"psmouse.c: issuing reconnect request\n");
238 serio_reconnect(psmouse
->ps2dev
.serio
);
245 case PSMOUSE_FULL_PACKET
:
247 if (psmouse
->out_of_sync
) {
248 psmouse
->out_of_sync
= 0;
249 printk(KERN_NOTICE
"psmouse.c: %s at %s - driver resynched.\n",
250 psmouse
->name
, psmouse
->phys
);
254 case PSMOUSE_GOOD_DATA
:
261 * psmouse_interrupt() handles incoming characters, either passing them
262 * for normal processing or gathering them as command response.
265 static irqreturn_t
psmouse_interrupt(struct serio
*serio
,
266 unsigned char data
, unsigned int flags
)
268 struct psmouse
*psmouse
= serio_get_drvdata(serio
);
270 if (psmouse
->state
== PSMOUSE_IGNORE
)
273 if (flags
& (SERIO_PARITY
|SERIO_TIMEOUT
)) {
274 if (psmouse
->state
== PSMOUSE_ACTIVATED
)
275 printk(KERN_WARNING
"psmouse.c: bad data from KBC -%s%s\n",
276 flags
& SERIO_TIMEOUT
? " timeout" : "",
277 flags
& SERIO_PARITY
? " bad parity" : "");
278 ps2_cmd_aborted(&psmouse
->ps2dev
);
282 if (unlikely(psmouse
->ps2dev
.flags
& PS2_FLAG_ACK
))
283 if (ps2_handle_ack(&psmouse
->ps2dev
, data
))
286 if (unlikely(psmouse
->ps2dev
.flags
& PS2_FLAG_CMD
))
287 if (ps2_handle_response(&psmouse
->ps2dev
, data
))
290 if (psmouse
->state
<= PSMOUSE_RESYNCING
)
293 if (psmouse
->state
== PSMOUSE_ACTIVATED
&&
294 psmouse
->pktcnt
&& time_after(jiffies
, psmouse
->last
+ HZ
/2)) {
295 printk(KERN_INFO
"psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
296 psmouse
->name
, psmouse
->phys
, psmouse
->pktcnt
);
297 psmouse
->badbyte
= psmouse
->packet
[0];
298 __psmouse_set_state(psmouse
, PSMOUSE_RESYNCING
);
299 queue_work(kpsmoused_wq
, &psmouse
->resync_work
);
303 psmouse
->packet
[psmouse
->pktcnt
++] = data
;
305 * Check if this is a new device announcement (0xAA 0x00)
307 if (unlikely(psmouse
->packet
[0] == PSMOUSE_RET_BAT
&& psmouse
->pktcnt
<= 2)) {
308 if (psmouse
->pktcnt
== 1) {
309 psmouse
->last
= jiffies
;
313 if (psmouse
->packet
[1] == PSMOUSE_RET_ID
) {
314 __psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
315 serio_reconnect(serio
);
319 * Not a new device, try processing first byte normally
322 if (psmouse_handle_byte(psmouse
))
325 psmouse
->packet
[psmouse
->pktcnt
++] = data
;
329 * See if we need to force resync because mouse was idle for too long
331 if (psmouse
->state
== PSMOUSE_ACTIVATED
&&
332 psmouse
->pktcnt
== 1 && psmouse
->resync_time
&&
333 time_after(jiffies
, psmouse
->last
+ psmouse
->resync_time
* HZ
)) {
334 psmouse
->badbyte
= psmouse
->packet
[0];
335 __psmouse_set_state(psmouse
, PSMOUSE_RESYNCING
);
336 queue_work(kpsmoused_wq
, &psmouse
->resync_work
);
340 psmouse
->last
= jiffies
;
341 psmouse_handle_byte(psmouse
);
349 * psmouse_sliced_command() sends an extended PS/2 command to the mouse
350 * using sliced syntax, understood by advanced devices, such as Logitech
351 * or Synaptics touchpads. The command is encoded as:
352 * 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
355 int psmouse_sliced_command(struct psmouse
*psmouse
, unsigned char command
)
359 if (ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
))
362 for (i
= 6; i
>= 0; i
-= 2) {
363 unsigned char d
= (command
>> i
) & 3;
364 if (ps2_command(&psmouse
->ps2dev
, &d
, PSMOUSE_CMD_SETRES
))
373 * psmouse_reset() resets the mouse into power-on state.
375 int psmouse_reset(struct psmouse
*psmouse
)
377 unsigned char param
[2];
379 if (ps2_command(&psmouse
->ps2dev
, param
, PSMOUSE_CMD_RESET_BAT
))
382 if (param
[0] != PSMOUSE_RET_BAT
&& param
[1] != PSMOUSE_RET_ID
)
390 * Genius NetMouse magic init.
392 static int genius_detect(struct psmouse
*psmouse
, int set_properties
)
394 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
395 unsigned char param
[4];
398 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRES
);
399 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
);
400 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
);
401 ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
);
402 ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETINFO
);
404 if (param
[0] != 0x00 || param
[1] != 0x33 || param
[2] != 0x55)
407 if (set_properties
) {
408 set_bit(BTN_EXTRA
, psmouse
->dev
->keybit
);
409 set_bit(BTN_SIDE
, psmouse
->dev
->keybit
);
410 set_bit(REL_WHEEL
, psmouse
->dev
->relbit
);
412 psmouse
->vendor
= "Genius";
413 psmouse
->name
= "Mouse";
414 psmouse
->pktsize
= 4;
421 * IntelliMouse magic init.
423 static int intellimouse_detect(struct psmouse
*psmouse
, int set_properties
)
425 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
426 unsigned char param
[2];
429 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
431 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
433 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
434 ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETID
);
439 if (set_properties
) {
440 set_bit(BTN_MIDDLE
, psmouse
->dev
->keybit
);
441 set_bit(REL_WHEEL
, psmouse
->dev
->relbit
);
443 if (!psmouse
->vendor
) psmouse
->vendor
= "Generic";
444 if (!psmouse
->name
) psmouse
->name
= "Wheel Mouse";
445 psmouse
->pktsize
= 4;
452 * Try IntelliMouse/Explorer magic init.
454 static int im_explorer_detect(struct psmouse
*psmouse
, int set_properties
)
456 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
457 unsigned char param
[2];
459 intellimouse_detect(psmouse
, 0);
462 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
464 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
466 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
467 ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETID
);
472 /* Magic to enable horizontal scrolling on IntelliMouse 4.0 */
474 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
476 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
478 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
480 if (set_properties
) {
481 set_bit(BTN_MIDDLE
, psmouse
->dev
->keybit
);
482 set_bit(REL_WHEEL
, psmouse
->dev
->relbit
);
483 set_bit(REL_HWHEEL
, psmouse
->dev
->relbit
);
484 set_bit(BTN_SIDE
, psmouse
->dev
->keybit
);
485 set_bit(BTN_EXTRA
, psmouse
->dev
->keybit
);
487 if (!psmouse
->vendor
) psmouse
->vendor
= "Generic";
488 if (!psmouse
->name
) psmouse
->name
= "Explorer Mouse";
489 psmouse
->pktsize
= 4;
496 * Kensington ThinkingMouse / ExpertMouse magic init.
498 static int thinking_detect(struct psmouse
*psmouse
, int set_properties
)
500 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
501 unsigned char param
[2];
502 static const unsigned char seq
[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
506 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
508 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRES
);
509 for (i
= 0; i
< ARRAY_SIZE(seq
); i
++) {
511 ps2_command(ps2dev
, param
, PSMOUSE_CMD_SETRATE
);
513 ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETID
);
518 if (set_properties
) {
519 set_bit(BTN_EXTRA
, psmouse
->dev
->keybit
);
521 psmouse
->vendor
= "Kensington";
522 psmouse
->name
= "ThinkingMouse";
529 * Bare PS/2 protocol "detection". Always succeeds.
531 static int ps2bare_detect(struct psmouse
*psmouse
, int set_properties
)
533 if (set_properties
) {
534 if (!psmouse
->vendor
) psmouse
->vendor
= "Generic";
535 if (!psmouse
->name
) psmouse
->name
= "Mouse";
543 * psmouse_extensions() probes for any extensions to the basic PS/2 protocol
544 * the mouse may have.
547 static int psmouse_extensions(struct psmouse
*psmouse
,
548 unsigned int max_proto
, int set_properties
)
550 int synaptics_hardware
= 0;
553 * We always check for lifebook because it does not disturb mouse
554 * (it only checks DMI information).
556 if (lifebook_detect(psmouse
, set_properties
) == 0) {
557 if (max_proto
> PSMOUSE_IMEX
) {
558 if (!set_properties
|| lifebook_init(psmouse
) == 0)
559 return PSMOUSE_LIFEBOOK
;
564 * Try Kensington ThinkingMouse (we try first, because synaptics probe
565 * upsets the thinkingmouse).
568 if (max_proto
> PSMOUSE_IMEX
&& thinking_detect(psmouse
, set_properties
) == 0)
569 return PSMOUSE_THINKPS
;
572 * Try Synaptics TouchPad
574 if (max_proto
> PSMOUSE_PS2
&& synaptics_detect(psmouse
, set_properties
) == 0) {
575 synaptics_hardware
= 1;
577 if (max_proto
> PSMOUSE_IMEX
) {
578 if (!set_properties
|| synaptics_init(psmouse
) == 0)
579 return PSMOUSE_SYNAPTICS
;
581 * Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
582 * Unfortunately Logitech/Genius probes confuse some firmware versions so
583 * we'll have to skip them.
585 max_proto
= PSMOUSE_IMEX
;
588 * Make sure that touchpad is in relative mode, gestures (taps) are enabled
590 synaptics_reset(psmouse
);
596 if (max_proto
> PSMOUSE_IMEX
) {
597 ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_RESET_DIS
);
598 if (alps_detect(psmouse
, set_properties
) == 0) {
599 if (!set_properties
|| alps_init(psmouse
) == 0)
602 * Init failed, try basic relative protocols
604 max_proto
= PSMOUSE_IMEX
;
608 if (max_proto
> PSMOUSE_IMEX
&& genius_detect(psmouse
, set_properties
) == 0)
609 return PSMOUSE_GENPS
;
611 if (max_proto
> PSMOUSE_IMEX
&& ps2pp_init(psmouse
, set_properties
) == 0)
612 return PSMOUSE_PS2PP
;
614 if (max_proto
> PSMOUSE_IMEX
&& trackpoint_detect(psmouse
, set_properties
) == 0)
615 return PSMOUSE_TRACKPOINT
;
618 * Reset to defaults in case the device got confused by extended
619 * protocol probes. Note that we do full reset becuase some mice
620 * put themselves to sleep when see PSMOUSE_RESET_DIS.
622 psmouse_reset(psmouse
);
624 if (max_proto
>= PSMOUSE_IMEX
&& im_explorer_detect(psmouse
, set_properties
) == 0)
627 if (max_proto
>= PSMOUSE_IMPS
&& intellimouse_detect(psmouse
, set_properties
) == 0)
631 * Okay, all failed, we have a standard mouse here. The number of the buttons
632 * is still a question, though. We assume 3.
634 ps2bare_detect(psmouse
, set_properties
);
636 if (synaptics_hardware
) {
638 * We detected Synaptics hardware but it did not respond to IMPS/2 probes.
639 * We need to reset the touchpad because if there is a track point on the
640 * pass through port it could get disabled while probing for protocol
643 psmouse_reset(psmouse
);
649 static const struct psmouse_protocol psmouse_protocols
[] = {
655 .detect
= ps2bare_detect
,
658 .type
= PSMOUSE_PS2PP
,
661 .detect
= ps2pp_init
,
664 .type
= PSMOUSE_THINKPS
,
667 .detect
= thinking_detect
,
670 .type
= PSMOUSE_GENPS
,
673 .detect
= genius_detect
,
676 .type
= PSMOUSE_IMPS
,
680 .detect
= intellimouse_detect
,
683 .type
= PSMOUSE_IMEX
,
687 .detect
= im_explorer_detect
,
690 .type
= PSMOUSE_SYNAPTICS
,
692 .alias
= "synaptics",
693 .detect
= synaptics_detect
,
694 .init
= synaptics_init
,
697 .type
= PSMOUSE_ALPS
,
700 .detect
= alps_detect
,
704 .type
= PSMOUSE_LIFEBOOK
,
707 .init
= lifebook_init
,
710 .type
= PSMOUSE_TRACKPOINT
,
712 .alias
= "trackpoint",
713 .detect
= trackpoint_detect
,
716 .type
= PSMOUSE_AUTO
,
723 static const struct psmouse_protocol
*psmouse_protocol_by_type(enum psmouse_type type
)
727 for (i
= 0; i
< ARRAY_SIZE(psmouse_protocols
); i
++)
728 if (psmouse_protocols
[i
].type
== type
)
729 return &psmouse_protocols
[i
];
732 return &psmouse_protocols
[0];
735 static const struct psmouse_protocol
*psmouse_protocol_by_name(const char *name
, size_t len
)
737 const struct psmouse_protocol
*p
;
740 for (i
= 0; i
< ARRAY_SIZE(psmouse_protocols
); i
++) {
741 p
= &psmouse_protocols
[i
];
743 if ((strlen(p
->name
) == len
&& !strncmp(p
->name
, name
, len
)) ||
744 (strlen(p
->alias
) == len
&& !strncmp(p
->alias
, name
, len
)))
745 return &psmouse_protocols
[i
];
753 * psmouse_probe() probes for a PS/2 mouse.
756 static int psmouse_probe(struct psmouse
*psmouse
)
758 struct ps2dev
*ps2dev
= &psmouse
->ps2dev
;
759 unsigned char param
[2];
762 * First, we check if it's a mouse. It should send 0x00 or 0x03
763 * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
764 * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent
765 * ID queries, probably due to a firmware bug.
769 if (ps2_command(ps2dev
, param
, PSMOUSE_CMD_GETID
))
772 if (param
[0] != 0x00 && param
[0] != 0x03 &&
773 param
[0] != 0x04 && param
[0] != 0xff)
777 * Then we reset and disable the mouse so that it doesn't generate events.
780 if (ps2_command(ps2dev
, NULL
, PSMOUSE_CMD_RESET_DIS
))
781 printk(KERN_WARNING
"psmouse.c: Failed to reset mouse on %s\n", ps2dev
->serio
->phys
);
787 * Here we set the mouse resolution.
790 void psmouse_set_resolution(struct psmouse
*psmouse
, unsigned int resolution
)
792 static const unsigned char params
[] = { 0, 1, 2, 2, 3 };
795 if (resolution
== 0 || resolution
> 200)
798 p
= params
[resolution
/ 50];
799 ps2_command(&psmouse
->ps2dev
, &p
, PSMOUSE_CMD_SETRES
);
800 psmouse
->resolution
= 25 << p
;
804 * Here we set the mouse report rate.
807 static void psmouse_set_rate(struct psmouse
*psmouse
, unsigned int rate
)
809 static const unsigned char rates
[] = { 200, 100, 80, 60, 40, 20, 10, 0 };
813 while (rates
[i
] > rate
) i
++;
815 ps2_command(&psmouse
->ps2dev
, &r
, PSMOUSE_CMD_SETRATE
);
820 * psmouse_initialize() initializes the mouse to a sane state.
823 static void psmouse_initialize(struct psmouse
*psmouse
)
826 * We set the mouse into streaming mode.
829 ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_SETSTREAM
);
832 * We set the mouse report rate, resolution and scaling.
835 if (psmouse_max_proto
!= PSMOUSE_PS2
) {
836 psmouse
->set_rate(psmouse
, psmouse
->rate
);
837 psmouse
->set_resolution(psmouse
, psmouse
->resolution
);
838 ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_SETSCALE11
);
843 * psmouse_activate() enables the mouse so that we get motion reports from it.
846 static void psmouse_activate(struct psmouse
*psmouse
)
848 if (ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_ENABLE
))
849 printk(KERN_WARNING
"psmouse.c: Failed to enable mouse on %s\n",
850 psmouse
->ps2dev
.serio
->phys
);
852 psmouse_set_state(psmouse
, PSMOUSE_ACTIVATED
);
857 * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion
858 * reports from it unless we explicitely request it.
861 static void psmouse_deactivate(struct psmouse
*psmouse
)
863 if (ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_DISABLE
))
864 printk(KERN_WARNING
"psmouse.c: Failed to deactivate mouse on %s\n",
865 psmouse
->ps2dev
.serio
->phys
);
867 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
871 * psmouse_poll() - default poll hanlder. Everyone except for ALPS uses it.
874 static int psmouse_poll(struct psmouse
*psmouse
)
876 return ps2_command(&psmouse
->ps2dev
, psmouse
->packet
,
877 PSMOUSE_CMD_POLL
| (psmouse
->pktsize
<< 8));
882 * psmouse_resync() attempts to re-validate current protocol.
885 static void psmouse_resync(struct work_struct
*work
)
887 struct psmouse
*parent
= NULL
, *psmouse
=
888 container_of(work
, struct psmouse
, resync_work
);
889 struct serio
*serio
= psmouse
->ps2dev
.serio
;
890 psmouse_ret_t rc
= PSMOUSE_GOOD_DATA
;
891 int failed
= 0, enabled
= 0;
894 mutex_lock(&psmouse_mutex
);
896 if (psmouse
->state
!= PSMOUSE_RESYNCING
)
899 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
900 parent
= serio_get_drvdata(serio
->parent
);
901 psmouse_deactivate(parent
);
905 * Some mice don't ACK commands sent while they are in the middle of
906 * transmitting motion packet. To avoid delay we use ps2_sendbyte()
907 * instead of ps2_command() which would wait for 200ms for an ACK
908 * that may never come.
909 * As an additional quirk ALPS touchpads may not only forget to ACK
910 * disable command but will stop reporting taps, so if we see that
911 * mouse at least once ACKs disable we will do full reconnect if ACK
914 psmouse
->num_resyncs
++;
916 if (ps2_sendbyte(&psmouse
->ps2dev
, PSMOUSE_CMD_DISABLE
, 20)) {
917 if (psmouse
->num_resyncs
< 3 || psmouse
->acks_disable_command
)
920 psmouse
->acks_disable_command
= 1;
923 * Poll the mouse. If it was reset the packet will be shorter than
924 * psmouse->pktsize and ps2_command will fail. We do not expect and
925 * do not handle scenario when mouse "upgrades" its protocol while
926 * disconnected since it would require additional delay. If we ever
927 * see a mouse that does it we'll adjust the code.
930 if (psmouse
->poll(psmouse
))
933 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
934 for (i
= 0; i
< psmouse
->pktsize
; i
++) {
936 rc
= psmouse
->protocol_handler(psmouse
);
937 if (rc
!= PSMOUSE_GOOD_DATA
)
940 if (rc
!= PSMOUSE_FULL_PACKET
)
942 psmouse_set_state(psmouse
, PSMOUSE_RESYNCING
);
946 * Now try to enable mouse. We try to do that even if poll failed and also
947 * repeat our attempts 5 times, otherwise we may be left out with disabled
950 for (i
= 0; i
< 5; i
++) {
951 if (!ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_ENABLE
)) {
959 printk(KERN_WARNING
"psmouse.c: failed to re-enable mouse on %s\n",
960 psmouse
->ps2dev
.serio
->phys
);
965 psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
966 printk(KERN_INFO
"psmouse.c: resync failed, issuing reconnect request\n");
967 serio_reconnect(serio
);
969 psmouse_set_state(psmouse
, PSMOUSE_ACTIVATED
);
972 psmouse_activate(parent
);
974 mutex_unlock(&psmouse_mutex
);
978 * psmouse_cleanup() resets the mouse into power-on state.
981 static void psmouse_cleanup(struct serio
*serio
)
983 struct psmouse
*psmouse
= serio_get_drvdata(serio
);
984 struct psmouse
*parent
= NULL
;
986 mutex_lock(&psmouse_mutex
);
988 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
989 parent
= serio_get_drvdata(serio
->parent
);
990 psmouse_deactivate(parent
);
993 psmouse_deactivate(psmouse
);
995 if (psmouse
->cleanup
)
996 psmouse
->cleanup(psmouse
);
998 psmouse_reset(psmouse
);
1001 * Some boxes, such as HP nx7400, get terribly confused if mouse
1002 * is not fully enabled before suspending/shutting down.
1004 ps2_command(&psmouse
->ps2dev
, NULL
, PSMOUSE_CMD_ENABLE
);
1007 if (parent
->pt_deactivate
)
1008 parent
->pt_deactivate(parent
);
1010 psmouse_activate(parent
);
1013 mutex_unlock(&psmouse_mutex
);
1017 * psmouse_disconnect() closes and frees.
1020 static void psmouse_disconnect(struct serio
*serio
)
1022 struct psmouse
*psmouse
, *parent
= NULL
;
1024 psmouse
= serio_get_drvdata(serio
);
1026 sysfs_remove_group(&serio
->dev
.kobj
, &psmouse_attribute_group
);
1028 mutex_lock(&psmouse_mutex
);
1030 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
1032 /* make sure we don't have a resync in progress */
1033 mutex_unlock(&psmouse_mutex
);
1034 flush_workqueue(kpsmoused_wq
);
1035 mutex_lock(&psmouse_mutex
);
1037 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
1038 parent
= serio_get_drvdata(serio
->parent
);
1039 psmouse_deactivate(parent
);
1042 if (psmouse
->disconnect
)
1043 psmouse
->disconnect(psmouse
);
1045 if (parent
&& parent
->pt_deactivate
)
1046 parent
->pt_deactivate(parent
);
1048 psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
1051 serio_set_drvdata(serio
, NULL
);
1052 input_unregister_device(psmouse
->dev
);
1056 psmouse_activate(parent
);
1058 mutex_unlock(&psmouse_mutex
);
1061 static int psmouse_switch_protocol(struct psmouse
*psmouse
, const struct psmouse_protocol
*proto
)
1063 struct input_dev
*input_dev
= psmouse
->dev
;
1065 input_dev
->private = psmouse
;
1066 input_dev
->cdev
.dev
= &psmouse
->ps2dev
.serio
->dev
;
1068 input_dev
->evbit
[0] = BIT(EV_KEY
) | BIT(EV_REL
);
1069 input_dev
->keybit
[LONG(BTN_MOUSE
)] = BIT(BTN_LEFT
) | BIT(BTN_MIDDLE
) | BIT(BTN_RIGHT
);
1070 input_dev
->relbit
[0] = BIT(REL_X
) | BIT(REL_Y
);
1072 psmouse
->set_rate
= psmouse_set_rate
;
1073 psmouse
->set_resolution
= psmouse_set_resolution
;
1074 psmouse
->poll
= psmouse_poll
;
1075 psmouse
->protocol_handler
= psmouse_process_byte
;
1076 psmouse
->pktsize
= 3;
1078 if (proto
&& (proto
->detect
|| proto
->init
)) {
1079 if (proto
->detect
&& proto
->detect(psmouse
, 1) < 0)
1082 if (proto
->init
&& proto
->init(psmouse
) < 0)
1085 psmouse
->type
= proto
->type
;
1088 psmouse
->type
= psmouse_extensions(psmouse
, psmouse_max_proto
, 1);
1091 * If mouse's packet size is 3 there is no point in polling the
1092 * device in hopes to detect protocol reset - we won't get less
1093 * than 3 bytes response anyhow.
1095 if (psmouse
->pktsize
== 3)
1096 psmouse
->resync_time
= 0;
1099 * Some smart KVMs fake response to POLL command returning just
1100 * 3 bytes and messing up our resync logic, so if initial poll
1101 * fails we won't try polling the device anymore. Hopefully
1102 * such KVM will maintain initially selected protocol.
1104 if (psmouse
->resync_time
&& psmouse
->poll(psmouse
))
1105 psmouse
->resync_time
= 0;
1107 snprintf(psmouse
->devname
, sizeof(psmouse
->devname
), "%s %s %s",
1108 psmouse_protocol_by_type(psmouse
->type
)->name
, psmouse
->vendor
, psmouse
->name
);
1110 input_dev
->name
= psmouse
->devname
;
1111 input_dev
->phys
= psmouse
->phys
;
1112 input_dev
->id
.bustype
= BUS_I8042
;
1113 input_dev
->id
.vendor
= 0x0002;
1114 input_dev
->id
.product
= psmouse
->type
;
1115 input_dev
->id
.version
= psmouse
->model
;
1121 * psmouse_connect() is a callback from the serio module when
1122 * an unhandled serio port is found.
1124 static int psmouse_connect(struct serio
*serio
, struct serio_driver
*drv
)
1126 struct psmouse
*psmouse
, *parent
= NULL
;
1127 struct input_dev
*input_dev
;
1128 int retval
= 0, error
= -ENOMEM
;
1130 mutex_lock(&psmouse_mutex
);
1133 * If this is a pass-through port deactivate parent so the device
1134 * connected to this port can be successfully identified
1136 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
1137 parent
= serio_get_drvdata(serio
->parent
);
1138 psmouse_deactivate(parent
);
1141 psmouse
= kzalloc(sizeof(struct psmouse
), GFP_KERNEL
);
1142 input_dev
= input_allocate_device();
1143 if (!psmouse
|| !input_dev
)
1146 ps2_init(&psmouse
->ps2dev
, serio
);
1147 INIT_WORK(&psmouse
->resync_work
, psmouse_resync
);
1148 psmouse
->dev
= input_dev
;
1149 snprintf(psmouse
->phys
, sizeof(psmouse
->phys
), "%s/input0", serio
->phys
);
1151 psmouse_set_state(psmouse
, PSMOUSE_INITIALIZING
);
1153 serio_set_drvdata(serio
, psmouse
);
1155 error
= serio_open(serio
, drv
);
1157 goto err_clear_drvdata
;
1159 if (psmouse_probe(psmouse
) < 0) {
1161 goto err_close_serio
;
1164 psmouse
->rate
= psmouse_rate
;
1165 psmouse
->resolution
= psmouse_resolution
;
1166 psmouse
->resetafter
= psmouse_resetafter
;
1167 psmouse
->resync_time
= parent
? 0 : psmouse_resync_time
;
1168 psmouse
->smartscroll
= psmouse_smartscroll
;
1170 psmouse_switch_protocol(psmouse
, NULL
);
1172 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
1173 psmouse_initialize(psmouse
);
1175 error
= input_register_device(psmouse
->dev
);
1177 goto err_protocol_disconnect
;
1179 if (parent
&& parent
->pt_activate
)
1180 parent
->pt_activate(parent
);
1182 error
= sysfs_create_group(&serio
->dev
.kobj
, &psmouse_attribute_group
);
1184 goto err_pt_deactivate
;
1186 psmouse_activate(psmouse
);
1189 /* If this is a pass-through port the parent needs to be re-activated */
1191 psmouse_activate(parent
);
1193 mutex_unlock(&psmouse_mutex
);
1197 if (parent
&& parent
->pt_deactivate
)
1198 parent
->pt_deactivate(parent
);
1199 err_protocol_disconnect
:
1200 if (psmouse
->disconnect
)
1201 psmouse
->disconnect(psmouse
);
1202 psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
1206 serio_set_drvdata(serio
, NULL
);
1208 input_free_device(input_dev
);
1216 static int psmouse_reconnect(struct serio
*serio
)
1218 struct psmouse
*psmouse
= serio_get_drvdata(serio
);
1219 struct psmouse
*parent
= NULL
;
1220 struct serio_driver
*drv
= serio
->drv
;
1223 if (!drv
|| !psmouse
) {
1224 printk(KERN_DEBUG
"psmouse: reconnect request, but serio is disconnected, ignoring...\n");
1228 mutex_lock(&psmouse_mutex
);
1230 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
1231 parent
= serio_get_drvdata(serio
->parent
);
1232 psmouse_deactivate(parent
);
1235 psmouse_set_state(psmouse
, PSMOUSE_INITIALIZING
);
1237 if (psmouse
->reconnect
) {
1238 if (psmouse
->reconnect(psmouse
))
1240 } else if (psmouse_probe(psmouse
) < 0 ||
1241 psmouse
->type
!= psmouse_extensions(psmouse
, psmouse_max_proto
, 0))
1244 /* ok, the device type (and capabilities) match the old one,
1245 * we can continue using it, complete intialization
1247 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
1249 psmouse_initialize(psmouse
);
1251 if (parent
&& parent
->pt_activate
)
1252 parent
->pt_activate(parent
);
1254 psmouse_activate(psmouse
);
1258 /* If this is a pass-through port the parent waits to be activated */
1260 psmouse_activate(parent
);
1262 mutex_unlock(&psmouse_mutex
);
1266 static struct serio_device_id psmouse_serio_ids
[] = {
1274 .type
= SERIO_PS_PSTHRU
,
1282 MODULE_DEVICE_TABLE(serio
, psmouse_serio_ids
);
1284 static struct serio_driver psmouse_drv
= {
1288 .description
= DRIVER_DESC
,
1289 .id_table
= psmouse_serio_ids
,
1290 .interrupt
= psmouse_interrupt
,
1291 .connect
= psmouse_connect
,
1292 .reconnect
= psmouse_reconnect
,
1293 .disconnect
= psmouse_disconnect
,
1294 .cleanup
= psmouse_cleanup
,
1297 ssize_t
psmouse_attr_show_helper(struct device
*dev
, struct device_attribute
*devattr
,
1300 struct serio
*serio
= to_serio_port(dev
);
1301 struct psmouse_attribute
*attr
= to_psmouse_attr(devattr
);
1302 struct psmouse
*psmouse
;
1305 retval
= serio_pin_driver(serio
);
1309 if (serio
->drv
!= &psmouse_drv
) {
1314 psmouse
= serio_get_drvdata(serio
);
1316 retval
= attr
->show(psmouse
, attr
->data
, buf
);
1319 serio_unpin_driver(serio
);
1323 ssize_t
psmouse_attr_set_helper(struct device
*dev
, struct device_attribute
*devattr
,
1324 const char *buf
, size_t count
)
1326 struct serio
*serio
= to_serio_port(dev
);
1327 struct psmouse_attribute
*attr
= to_psmouse_attr(devattr
);
1328 struct psmouse
*psmouse
, *parent
= NULL
;
1331 retval
= serio_pin_driver(serio
);
1335 if (serio
->drv
!= &psmouse_drv
) {
1340 retval
= mutex_lock_interruptible(&psmouse_mutex
);
1344 psmouse
= serio_get_drvdata(serio
);
1346 if (psmouse
->state
== PSMOUSE_IGNORE
) {
1351 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
1352 parent
= serio_get_drvdata(serio
->parent
);
1353 psmouse_deactivate(parent
);
1356 psmouse_deactivate(psmouse
);
1358 retval
= attr
->set(psmouse
, attr
->data
, buf
, count
);
1360 if (retval
!= -ENODEV
)
1361 psmouse_activate(psmouse
);
1364 psmouse_activate(parent
);
1367 mutex_unlock(&psmouse_mutex
);
1369 serio_unpin_driver(serio
);
1373 static ssize_t
psmouse_show_int_attr(struct psmouse
*psmouse
, void *offset
, char *buf
)
1375 unsigned int *field
= (unsigned int *)((char *)psmouse
+ (size_t)offset
);
1377 return sprintf(buf
, "%u\n", *field
);
1380 static ssize_t
psmouse_set_int_attr(struct psmouse
*psmouse
, void *offset
, const char *buf
, size_t count
)
1382 unsigned int *field
= (unsigned int *)((char *)psmouse
+ (size_t)offset
);
1383 unsigned long value
;
1386 value
= simple_strtoul(buf
, &rest
, 10);
1390 if ((unsigned int)value
!= value
)
1398 static ssize_t
psmouse_attr_show_protocol(struct psmouse
*psmouse
, void *data
, char *buf
)
1400 return sprintf(buf
, "%s\n", psmouse_protocol_by_type(psmouse
->type
)->name
);
1403 static ssize_t
psmouse_attr_set_protocol(struct psmouse
*psmouse
, void *data
, const char *buf
, size_t count
)
1405 struct serio
*serio
= psmouse
->ps2dev
.serio
;
1406 struct psmouse
*parent
= NULL
;
1407 struct input_dev
*old_dev
, *new_dev
;
1408 const struct psmouse_protocol
*proto
, *old_proto
;
1412 proto
= psmouse_protocol_by_name(buf
, count
);
1416 if (psmouse
->type
== proto
->type
)
1419 new_dev
= input_allocate_device();
1423 while (serio
->child
) {
1425 printk(KERN_WARNING
"psmouse: failed to destroy child port, protocol change aborted.\n");
1426 input_free_device(new_dev
);
1430 mutex_unlock(&psmouse_mutex
);
1431 serio_unpin_driver(serio
);
1432 serio_unregister_child_port(serio
);
1433 serio_pin_driver_uninterruptible(serio
);
1434 mutex_lock(&psmouse_mutex
);
1436 if (serio
->drv
!= &psmouse_drv
) {
1437 input_free_device(new_dev
);
1441 if (psmouse
->type
== proto
->type
) {
1442 input_free_device(new_dev
);
1443 return count
; /* switched by other thread */
1447 if (serio
->parent
&& serio
->id
.type
== SERIO_PS_PSTHRU
) {
1448 parent
= serio_get_drvdata(serio
->parent
);
1449 if (parent
->pt_deactivate
)
1450 parent
->pt_deactivate(parent
);
1453 old_dev
= psmouse
->dev
;
1454 old_proto
= psmouse_protocol_by_type(psmouse
->type
);
1456 if (psmouse
->disconnect
)
1457 psmouse
->disconnect(psmouse
);
1459 psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
1461 psmouse
->dev
= new_dev
;
1462 psmouse_set_state(psmouse
, PSMOUSE_INITIALIZING
);
1464 if (psmouse_switch_protocol(psmouse
, proto
) < 0) {
1465 psmouse_reset(psmouse
);
1466 /* default to PSMOUSE_PS2 */
1467 psmouse_switch_protocol(psmouse
, &psmouse_protocols
[0]);
1470 psmouse_initialize(psmouse
);
1471 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
1473 error
= input_register_device(psmouse
->dev
);
1475 if (psmouse
->disconnect
)
1476 psmouse
->disconnect(psmouse
);
1478 psmouse_set_state(psmouse
, PSMOUSE_IGNORE
);
1479 input_free_device(new_dev
);
1480 psmouse
->dev
= old_dev
;
1481 psmouse_set_state(psmouse
, PSMOUSE_INITIALIZING
);
1482 psmouse_switch_protocol(psmouse
, old_proto
);
1483 psmouse_initialize(psmouse
);
1484 psmouse_set_state(psmouse
, PSMOUSE_CMD_MODE
);
1489 input_unregister_device(old_dev
);
1491 if (parent
&& parent
->pt_activate
)
1492 parent
->pt_activate(parent
);
1497 static ssize_t
psmouse_attr_set_rate(struct psmouse
*psmouse
, void *data
, const char *buf
, size_t count
)
1499 unsigned long value
;
1502 value
= simple_strtoul(buf
, &rest
, 10);
1506 psmouse
->set_rate(psmouse
, value
);
1510 static ssize_t
psmouse_attr_set_resolution(struct psmouse
*psmouse
, void *data
, const char *buf
, size_t count
)
1512 unsigned long value
;
1515 value
= simple_strtoul(buf
, &rest
, 10);
1519 psmouse
->set_resolution(psmouse
, value
);
1524 static int psmouse_set_maxproto(const char *val
, struct kernel_param
*kp
)
1526 const struct psmouse_protocol
*proto
;
1531 proto
= psmouse_protocol_by_name(val
, strlen(val
));
1533 if (!proto
|| !proto
->maxproto
)
1536 *((unsigned int *)kp
->arg
) = proto
->type
;
1541 static int psmouse_get_maxproto(char *buffer
, struct kernel_param
*kp
)
1543 int type
= *((unsigned int *)kp
->arg
);
1545 return sprintf(buffer
, "%s\n", psmouse_protocol_by_type(type
)->name
);
1548 static int __init
psmouse_init(void)
1552 kpsmoused_wq
= create_singlethread_workqueue("kpsmoused");
1553 if (!kpsmoused_wq
) {
1554 printk(KERN_ERR
"psmouse: failed to create kpsmoused workqueue\n");
1558 err
= serio_register_driver(&psmouse_drv
);
1560 destroy_workqueue(kpsmoused_wq
);
1565 static void __exit
psmouse_exit(void)
1567 serio_unregister_driver(&psmouse_drv
);
1568 destroy_workqueue(kpsmoused_wq
);
1571 module_init(psmouse_init
);
1572 module_exit(psmouse_exit
);