drivers/isdn/hysdn/hysdn_sched.c

   1 /* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $
   2  *
   3  * Linux driver for HYSDN cards
   4  * scheduler routines for handling exchange card <-> pc.
   5  *
   6  * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
   7  * Copyright 1999 by Werner Cornelius (werner@titro.de)
   8  *
   9  * This software may be used and distributed according to the terms
  10  * of the GNU General Public License, incorporated herein by reference.
  11  *
  12  */
  13
  14 #include <linux/signal.h>
  15 #include <linux/kernel.h>
  16 #include <linux/ioport.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/delay.h>
  19 #include <asm/io.h>
  20
  21 #include "hysdn_defs.h"
  22
  23 /*****************************************************************************/
  24 /* hysdn_sched_rx is called from the cards handler to announce new data is   */
  25 /* available from the card. The routine has to handle the data and return    */
  26 /* with a nonzero code if the data could be worked (or even thrown away), if */
  27 /* no room to buffer the data is available a zero return tells the card      */
  28 /* to keep the data until later.                                             */
  29 /*****************************************************************************/
  30 int
  31 hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
  32                         unsigned short chan)
  33 {
  34
  35         switch (chan) {
  36                 case CHAN_NDIS_DATA:
  37                         if (hynet_enable & (1 << card->myid)) {
  38                           /* give packet to network handler */
  39                                 hysdn_rx_netpkt(card, buf, len);
  40                         }
  41                         break;
  42
  43                 case CHAN_ERRLOG:
  44                         hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
  45                         if (card->err_log_state == ERRLOG_STATE_ON)
  46                                 card->err_log_state = ERRLOG_STATE_START;       /* start new fetch */
  47                         break;
  48 #ifdef CONFIG_HYSDN_CAPI
  49                 case CHAN_CAPI:
  50 /* give packet to CAPI handler */
  51                         if (hycapi_enable & (1 << card->myid)) {
  52                                 hycapi_rx_capipkt(card, buf, len);
  53                         }
  54                         break;
  55 #endif /* CONFIG_HYSDN_CAPI */
  56                 default:
  57                         printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
  58                         break;
  59
  60         }                       /* switch rx channel */
  61
  62         return (1);             /* always handled */
  63 }                               /* hysdn_sched_rx */
  64
  65 /*****************************************************************************/
  66 /* hysdn_sched_tx is called from the cards handler to announce that there is */
  67 /* room in the tx-buffer to the card and data may be sent if needed.         */
  68 /* If the routine wants to send data it must fill buf, len and chan with the */
  69 /* appropriate data and return a nonzero value. With a zero return no new    */
  70 /* data to send is assumed. maxlen specifies the buffer size available for   */
  71 /* sending.                                                                  */
  72 /*****************************************************************************/
  73 int
  74 hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
  75                 unsigned short volatile *len, unsigned short volatile *chan,
  76                 unsigned short maxlen)
  77 {
  78         struct sk_buff *skb;
  79
  80         if (card->net_tx_busy) {
  81                 card->net_tx_busy = 0;  /* reset flag */
  82                 hysdn_tx_netack(card);  /* acknowledge packet send */
  83         }                       /* a network packet has completely been transferred */
  84         /* first of all async requests are handled */
  85         if (card->async_busy) {
  86                 if (card->async_len <= maxlen) {
  87                         memcpy(buf, card->async_data, card->async_len);
  88                         *len = card->async_len;
  89                         *chan = card->async_channel;
  90                         card->async_busy = 0;   /* reset request */
  91                         return (1);
  92                 }
  93                 card->async_busy = 0;   /* in case of length error */
  94         }                       /* async request */
  95         if ((card->err_log_state == ERRLOG_STATE_START) &&
  96             (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
  97                 strcpy(buf, ERRLOG_CMD_REQ);    /* copy the command */
  98                 *len = ERRLOG_CMD_REQ_SIZE;     /* buffer length */
  99                 *chan = CHAN_ERRLOG;    /* and channel */
 100                 card->err_log_state = ERRLOG_STATE_ON;  /* new state is on */
 101                 return (1);     /* tell that data should be send */
 102         }                       /* error log start and able to send */
 103         if ((card->err_log_state == ERRLOG_STATE_STOP) &&
 104             (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
 105                 strcpy(buf, ERRLOG_CMD_STOP);   /* copy the command */
 106                 *len = ERRLOG_CMD_STOP_SIZE;    /* buffer length */
 107                 *chan = CHAN_ERRLOG;    /* and channel */
 108                 card->err_log_state = ERRLOG_STATE_OFF;         /* new state is off */
 109                 return (1);     /* tell that data should be send */
 110         }                       /* error log start and able to send */
 111         /* now handle network interface packets */
 112         if ((hynet_enable & (1 << card->myid)) &&
 113             (skb = hysdn_tx_netget(card)) != NULL)
 114         {
 115                 if (skb->len <= maxlen) {
 116                         memcpy(buf, skb->data, skb->len);       /* copy the packet to the buffer */
 117                         *len = skb->len;
 118                         *chan = CHAN_NDIS_DATA;
 119                         card->net_tx_busy = 1;  /* we are busy sending network data */
 120                         return (1);     /* go and send the data */
 121                 } else
 122                         hysdn_tx_netack(card);  /* aknowledge packet -> throw away */
 123         }                       /* send a network packet if available */
 124 #ifdef CONFIG_HYSDN_CAPI
 125         if( ((hycapi_enable & (1 << card->myid))) &&
 126             ((skb = hycapi_tx_capiget(card)) != NULL) )
 127         {
 128                 if (skb->len <= maxlen) {
 129                         memcpy(buf, skb->data, skb->len);
 130                         *len = skb->len;
 131                         *chan = CHAN_CAPI;
 132                         hycapi_tx_capiack(card);
 133                         return (1);     /* go and send the data */
 134                 }
 135         }
 136 #endif /* CONFIG_HYSDN_CAPI */
 137         return (0);             /* nothing to send */
 138 }                               /* hysdn_sched_tx */
 139
 140
 141 /*****************************************************************************/
 142 /* send one config line to the card and return 0 if successful, otherwise a */
 143 /* negative error code.                                                      */
 144 /* The function works with timeouts perhaps not giving the greatest speed    */
 145 /* sending the line, but this should be meaningless beacuse only some lines  */
 146 /* are to be sent and this happens very seldom.                              */
 147 /*****************************************************************************/
 148 int
 149 hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
 150 {
 151         int cnt = 50;           /* timeout intervalls */
 152         unsigned long flags;
 153
 154         if (card->debug_flags & LOG_SCHED_ASYN)
 155                 hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
 156
 157         while (card->async_busy) {
 158
 159                 if (card->debug_flags & LOG_SCHED_ASYN)
 160                         hysdn_addlog(card, "async tx-cfg delayed");
 161
 162                 msleep_interruptible(20);               /* Timeout 20ms */
 163                 if (!--cnt)
 164                         return (-ERR_ASYNC_TIME);       /* timed out */
 165         }                       /* wait for buffer to become free */
 166
 167         spin_lock_irqsave(&card->hysdn_lock, flags);
 168         strcpy(card->async_data, line);
 169         card->async_len = strlen(line) + 1;
 170         card->async_channel = chan;
 171         card->async_busy = 1;   /* request transfer */
 172
 173         /* now queue the task */
 174         schedule_work(&card->irq_queue);
 175         spin_unlock_irqrestore(&card->hysdn_lock, flags);
 176
 177         if (card->debug_flags & LOG_SCHED_ASYN)
 178                 hysdn_addlog(card, "async tx-cfg data queued");
 179
 180         cnt++;                  /* short delay */
 181
 182         while (card->async_busy) {
 183
 184                 if (card->debug_flags & LOG_SCHED_ASYN)
 185                         hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
 186
 187                 msleep_interruptible(20);               /* Timeout 20ms */
 188                 if (!--cnt)
 189                         return (-ERR_ASYNC_TIME);       /* timed out */
 190         }                       /* wait for buffer to become free again */
 191
 192         if (card->debug_flags & LOG_SCHED_ASYN)
 193                 hysdn_addlog(card, "async tx-cfg data send");
 194
 195         return (0);             /* line send correctly */
 196 }                               /* hysdn_tx_cfgline */