2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <asm/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION
);
61 static int rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_DEFAULT
;
62 static int tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_DEFAULT
;
64 module_param(rx_descriptors
, int, 0444);
65 module_param(tx_descriptors
, int, 0444);
67 MODULE_PARM_DESC(rx_descriptors
, "number of descriptors used " \
69 MODULE_PARM_DESC(tx_descriptors
, "number of descriptors used " \
72 char spider_net_driver_name
[] = "spidernet";
74 static struct pci_device_id spider_net_pci_tbl
[] = {
75 { PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET
,
76 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0UL },
80 MODULE_DEVICE_TABLE(pci
, spider_net_pci_tbl
);
83 * spider_net_read_reg - reads an SMMIO register of a card
84 * @card: device structure
85 * @reg: register to read from
87 * returns the content of the specified SMMIO register.
90 spider_net_read_reg(struct spider_net_card
*card
, u32 reg
)
92 /* We use the powerpc specific variants instead of readl_be() because
93 * we know spidernet is not a real PCI device and we can thus avoid the
94 * performance hit caused by the PCI workarounds.
96 return in_be32(card
->regs
+ reg
);
100 * spider_net_write_reg - writes to an SMMIO register of a card
101 * @card: device structure
102 * @reg: register to write to
103 * @value: value to write into the specified SMMIO register
106 spider_net_write_reg(struct spider_net_card
*card
, u32 reg
, u32 value
)
108 /* We use the powerpc specific variants instead of writel_be() because
109 * we know spidernet is not a real PCI device and we can thus avoid the
110 * performance hit caused by the PCI workarounds.
112 out_be32(card
->regs
+ reg
, value
);
115 /** spider_net_write_phy - write to phy register
116 * @netdev: adapter to be written to
119 * @val: value to be written to phy register
121 * spider_net_write_phy_register writes to an arbitrary PHY
122 * register via the spider GPCWOPCMD register. We assume the queue does
123 * not run full (not more than 15 commands outstanding).
126 spider_net_write_phy(struct net_device
*netdev
, int mii_id
,
129 struct spider_net_card
*card
= netdev_priv(netdev
);
132 writevalue
= ((u32
)mii_id
<< 21) |
133 ((u32
)reg
<< 16) | ((u32
)val
);
135 spider_net_write_reg(card
, SPIDER_NET_GPCWOPCMD
, writevalue
);
138 /** spider_net_read_phy - read from phy register
139 * @netdev: network device to be read from
143 * Returns value read from PHY register
145 * spider_net_write_phy reads from an arbitrary PHY
146 * register via the spider GPCROPCMD register
149 spider_net_read_phy(struct net_device
*netdev
, int mii_id
, int reg
)
151 struct spider_net_card
*card
= netdev_priv(netdev
);
154 readvalue
= ((u32
)mii_id
<< 21) | ((u32
)reg
<< 16);
155 spider_net_write_reg(card
, SPIDER_NET_GPCROPCMD
, readvalue
);
157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 * interrupt, as we poll for the completion of the read operation
159 * in spider_net_read_phy. Should take about 50 us */
161 readvalue
= spider_net_read_reg(card
, SPIDER_NET_GPCROPCMD
);
162 } while (readvalue
& SPIDER_NET_GPREXEC
);
164 readvalue
&= SPIDER_NET_GPRDAT_MASK
;
170 * spider_net_setup_aneg - initial auto-negotiation setup
171 * @card: device structure
174 spider_net_setup_aneg(struct spider_net_card
*card
)
176 struct mii_phy
*phy
= &card
->phy
;
178 u16 bmcr
, bmsr
, stat1000
, estat
;
180 bmcr
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMCR
);
181 bmsr
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
182 stat1000
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_STAT1000
);
183 estat
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_ESTATUS
);
185 if (bmsr
& BMSR_10HALF
)
186 advertise
|= ADVERTISED_10baseT_Half
;
187 if (bmsr
& BMSR_10FULL
)
188 advertise
|= ADVERTISED_10baseT_Full
;
189 if (bmsr
& BMSR_100HALF
)
190 advertise
|= ADVERTISED_100baseT_Half
;
191 if (bmsr
& BMSR_100FULL
)
192 advertise
|= ADVERTISED_100baseT_Full
;
194 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_TFULL
))
195 advertise
|= SUPPORTED_1000baseT_Full
;
196 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_THALF
))
197 advertise
|= SUPPORTED_1000baseT_Half
;
199 mii_phy_probe(phy
, phy
->mii_id
);
200 phy
->def
->ops
->setup_aneg(phy
, advertise
);
205 * spider_net_rx_irq_off - switch off rx irq on this spider card
206 * @card: device structure
208 * switches off rx irq by masking them out in the GHIINTnMSK register
211 spider_net_rx_irq_off(struct spider_net_card
*card
)
215 regvalue
= SPIDER_NET_INT0_MASK_VALUE
& (~SPIDER_NET_RXINT
);
216 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
220 * spider_net_rx_irq_on - switch on rx irq on this spider card
221 * @card: device structure
223 * switches on rx irq by enabling them in the GHIINTnMSK register
226 spider_net_rx_irq_on(struct spider_net_card
*card
)
230 regvalue
= SPIDER_NET_INT0_MASK_VALUE
| SPIDER_NET_RXINT
;
231 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
235 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
236 * @card: card structure
238 * spider_net_set_promisc sets the unicast destination address filter and
239 * thus either allows for non-promisc mode or promisc mode
242 spider_net_set_promisc(struct spider_net_card
*card
)
245 struct net_device
*netdev
= card
->netdev
;
247 if (netdev
->flags
& IFF_PROMISC
) {
248 /* clear destination entry 0 */
249 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, 0);
250 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, 0);
251 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
252 SPIDER_NET_PROMISC_VALUE
);
254 macu
= netdev
->dev_addr
[0];
256 macu
|= netdev
->dev_addr
[1];
257 memcpy(&macl
, &netdev
->dev_addr
[2], sizeof(macl
));
259 macu
|= SPIDER_NET_UA_DESCR_VALUE
;
260 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, macu
);
261 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, macl
);
262 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
263 SPIDER_NET_NONPROMISC_VALUE
);
268 * spider_net_get_mac_address - read mac address from spider card
269 * @card: device structure
271 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
274 spider_net_get_mac_address(struct net_device
*netdev
)
276 struct spider_net_card
*card
= netdev_priv(netdev
);
279 macl
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACL
);
280 macu
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACU
);
282 netdev
->dev_addr
[0] = (macu
>> 24) & 0xff;
283 netdev
->dev_addr
[1] = (macu
>> 16) & 0xff;
284 netdev
->dev_addr
[2] = (macu
>> 8) & 0xff;
285 netdev
->dev_addr
[3] = macu
& 0xff;
286 netdev
->dev_addr
[4] = (macl
>> 8) & 0xff;
287 netdev
->dev_addr
[5] = macl
& 0xff;
289 if (!is_valid_ether_addr(&netdev
->dev_addr
[0]))
296 * spider_net_get_descr_status -- returns the status of a descriptor
297 * @descr: descriptor to look at
299 * returns the status as in the dmac_cmd_status field of the descriptor
302 spider_net_get_descr_status(struct spider_net_hw_descr
*hwdescr
)
304 return hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_IND_PROC_MASK
;
308 * spider_net_free_chain - free descriptor chain
309 * @card: card structure
310 * @chain: address of chain
314 spider_net_free_chain(struct spider_net_card
*card
,
315 struct spider_net_descr_chain
*chain
)
317 struct spider_net_descr
*descr
;
322 descr
->hwdescr
->next_descr_addr
= 0;
324 } while (descr
!= chain
->ring
);
326 dma_free_coherent(&card
->pdev
->dev
, chain
->num_desc
,
327 chain
->hwring
, chain
->dma_addr
);
331 * spider_net_init_chain - alloc and link descriptor chain
332 * @card: card structure
333 * @chain: address of chain
335 * We manage a circular list that mirrors the hardware structure,
336 * except that the hardware uses bus addresses.
338 * Returns 0 on success, <0 on failure
341 spider_net_init_chain(struct spider_net_card
*card
,
342 struct spider_net_descr_chain
*chain
)
345 struct spider_net_descr
*descr
;
346 struct spider_net_hw_descr
*hwdescr
;
350 alloc_size
= chain
->num_desc
* sizeof(struct spider_net_hw_descr
);
352 chain
->hwring
= dma_alloc_coherent(&card
->pdev
->dev
, alloc_size
,
353 &chain
->dma_addr
, GFP_KERNEL
);
358 memset(chain
->ring
, 0, chain
->num_desc
* sizeof(struct spider_net_descr
));
360 /* Set up the hardware pointers in each descriptor */
362 hwdescr
= chain
->hwring
;
363 buf
= chain
->dma_addr
;
364 for (i
=0; i
< chain
->num_desc
; i
++, descr
++, hwdescr
++) {
365 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
366 hwdescr
->next_descr_addr
= 0;
368 descr
->hwdescr
= hwdescr
;
369 descr
->bus_addr
= buf
;
370 descr
->next
= descr
+ 1;
371 descr
->prev
= descr
- 1;
373 buf
+= sizeof(struct spider_net_hw_descr
);
375 /* do actual circular list */
376 (descr
-1)->next
= chain
->ring
;
377 chain
->ring
->prev
= descr
-1;
379 spin_lock_init(&chain
->lock
);
380 chain
->head
= chain
->ring
;
381 chain
->tail
= chain
->ring
;
386 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
387 * @card: card structure
389 * returns 0 on success, <0 on failure
392 spider_net_free_rx_chain_contents(struct spider_net_card
*card
)
394 struct spider_net_descr
*descr
;
396 descr
= card
->rx_chain
.head
;
399 pci_unmap_single(card
->pdev
, descr
->hwdescr
->buf_addr
,
400 SPIDER_NET_MAX_FRAME
,
401 PCI_DMA_BIDIRECTIONAL
);
402 dev_kfree_skb(descr
->skb
);
406 } while (descr
!= card
->rx_chain
.head
);
410 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
411 * @card: card structure
412 * @descr: descriptor to re-init
414 * Return 0 on succes, <0 on failure.
416 * Allocates a new rx skb, iommu-maps it and attaches it to the
417 * descriptor. Mark the descriptor as activated, ready-to-use.
420 spider_net_prepare_rx_descr(struct spider_net_card
*card
,
421 struct spider_net_descr
*descr
)
423 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
428 /* we need to round up the buffer size to a multiple of 128 */
429 bufsize
= (SPIDER_NET_MAX_FRAME
+ SPIDER_NET_RXBUF_ALIGN
- 1) &
430 (~(SPIDER_NET_RXBUF_ALIGN
- 1));
432 /* and we need to have it 128 byte aligned, therefore we allocate a
434 /* allocate an skb */
435 descr
->skb
= dev_alloc_skb(bufsize
+ SPIDER_NET_RXBUF_ALIGN
- 1);
437 if (netif_msg_rx_err(card
) && net_ratelimit())
438 pr_err("Not enough memory to allocate rx buffer\n");
439 card
->spider_stats
.alloc_rx_skb_error
++;
442 hwdescr
->buf_size
= bufsize
;
443 hwdescr
->result_size
= 0;
444 hwdescr
->valid_size
= 0;
445 hwdescr
->data_status
= 0;
446 hwdescr
->data_error
= 0;
448 offset
= ((unsigned long)descr
->skb
->data
) &
449 (SPIDER_NET_RXBUF_ALIGN
- 1);
451 skb_reserve(descr
->skb
, SPIDER_NET_RXBUF_ALIGN
- offset
);
452 /* iommu-map the skb */
453 buf
= pci_map_single(card
->pdev
, descr
->skb
->data
,
454 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
455 if (pci_dma_mapping_error(buf
)) {
456 dev_kfree_skb_any(descr
->skb
);
458 if (netif_msg_rx_err(card
) && net_ratelimit())
459 pr_err("Could not iommu-map rx buffer\n");
460 card
->spider_stats
.rx_iommu_map_error
++;
461 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
463 hwdescr
->buf_addr
= buf
;
464 hwdescr
->next_descr_addr
= 0;
466 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_CARDOWNED
|
467 SPIDER_NET_DMAC_NOINTR_COMPLETE
;
470 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
477 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
478 * @card: card structure
480 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
481 * chip by writing to the appropriate register. DMA is enabled in
482 * spider_net_enable_rxdmac.
485 spider_net_enable_rxchtails(struct spider_net_card
*card
)
487 /* assume chain is aligned correctly */
488 spider_net_write_reg(card
, SPIDER_NET_GDADCHA
,
489 card
->rx_chain
.tail
->bus_addr
);
493 * spider_net_enable_rxdmac - enables a receive DMA controller
494 * @card: card structure
496 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
497 * in the GDADMACCNTR register
500 spider_net_enable_rxdmac(struct spider_net_card
*card
)
503 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
504 SPIDER_NET_DMA_RX_VALUE
);
508 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
509 * @card: card structure
511 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
514 spider_net_refill_rx_chain(struct spider_net_card
*card
)
516 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
519 /* one context doing the refill (and a second context seeing that
520 * and omitting it) is ok. If called by NAPI, we'll be called again
521 * as spider_net_decode_one_descr is called several times. If some
522 * interrupt calls us, the NAPI is about to clean up anyway. */
523 if (!spin_trylock_irqsave(&chain
->lock
, flags
))
526 while (spider_net_get_descr_status(chain
->head
->hwdescr
) ==
527 SPIDER_NET_DESCR_NOT_IN_USE
) {
528 if (spider_net_prepare_rx_descr(card
, chain
->head
))
530 chain
->head
= chain
->head
->next
;
533 spin_unlock_irqrestore(&chain
->lock
, flags
);
537 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
538 * @card: card structure
540 * Returns 0 on success, <0 on failure.
543 spider_net_alloc_rx_skbs(struct spider_net_card
*card
)
546 struct spider_net_descr_chain
*chain
;
550 chain
= &card
->rx_chain
;
551 /* Put at least one buffer into the chain. if this fails,
552 * we've got a problem. If not, spider_net_refill_rx_chain
553 * will do the rest at the end of this function. */
554 if (spider_net_prepare_rx_descr(card
, chain
->head
))
557 chain
->head
= chain
->head
->next
;
559 /* This will allocate the rest of the rx buffers;
560 * if not, it's business as usual later on. */
561 spider_net_refill_rx_chain(card
);
562 spider_net_enable_rxdmac(card
);
566 spider_net_free_rx_chain_contents(card
);
571 * spider_net_get_multicast_hash - generates hash for multicast filter table
572 * @addr: multicast address
574 * returns the hash value.
576 * spider_net_get_multicast_hash calculates a hash value for a given multicast
577 * address, that is used to set the multicast filter tables
580 spider_net_get_multicast_hash(struct net_device
*netdev
, __u8
*addr
)
584 char addr_for_crc
[ETH_ALEN
] = { 0, };
587 for (i
= 0; i
< ETH_ALEN
* 8; i
++) {
588 bit
= (addr
[i
/ 8] >> (i
% 8)) & 1;
589 addr_for_crc
[ETH_ALEN
- 1 - i
/ 8] += bit
<< (7 - (i
% 8));
592 crc
= crc32_be(~0, addr_for_crc
, netdev
->addr_len
);
603 * spider_net_set_multi - sets multicast addresses and promisc flags
604 * @netdev: interface device structure
606 * spider_net_set_multi configures multicast addresses as needed for the
607 * netdev interface. It also sets up multicast, allmulti and promisc
608 * flags appropriately
611 spider_net_set_multi(struct net_device
*netdev
)
613 struct dev_mc_list
*mc
;
617 struct spider_net_card
*card
= netdev_priv(netdev
);
618 unsigned long bitmask
[SPIDER_NET_MULTICAST_HASHES
/ BITS_PER_LONG
] =
621 spider_net_set_promisc(card
);
623 if (netdev
->flags
& IFF_ALLMULTI
) {
624 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
; i
++) {
630 /* well, we know, what the broadcast hash value is: it's xfd
631 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
632 set_bit(0xfd, bitmask
);
634 for (mc
= netdev
->mc_list
; mc
; mc
= mc
->next
) {
635 hash
= spider_net_get_multicast_hash(netdev
, mc
->dmi_addr
);
636 set_bit(hash
, bitmask
);
640 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
/ 4; i
++) {
642 if (test_bit(i
* 4, bitmask
))
645 if (test_bit(i
* 4 + 1, bitmask
))
648 if (test_bit(i
* 4 + 2, bitmask
))
651 if (test_bit(i
* 4 + 3, bitmask
))
654 spider_net_write_reg(card
, SPIDER_NET_GMRMHFILnR
+ i
* 4, reg
);
659 * spider_net_disable_rxdmac - disables the receive DMA controller
660 * @card: card structure
662 * spider_net_disable_rxdmac terminates processing on the DMA controller by
663 * turing off DMA and issueing a force end
666 spider_net_disable_rxdmac(struct spider_net_card
*card
)
668 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
669 SPIDER_NET_DMA_RX_FEND_VALUE
);
673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674 * @card: card structure
675 * @descr: descriptor structure to fill out
676 * @skb: packet to use
678 * returns 0 on success, <0 on failure.
680 * fills out the descriptor structure with skb data and len. Copies data,
681 * if needed (32bit DMA!)
684 spider_net_prepare_tx_descr(struct spider_net_card
*card
,
687 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
688 struct spider_net_descr
*descr
;
689 struct spider_net_hw_descr
*hwdescr
;
693 buf
= pci_map_single(card
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
694 if (pci_dma_mapping_error(buf
)) {
695 if (netif_msg_tx_err(card
) && net_ratelimit())
696 pr_err("could not iommu-map packet (%p, %i). "
697 "Dropping packet\n", skb
->data
, skb
->len
);
698 card
->spider_stats
.tx_iommu_map_error
++;
702 spin_lock_irqsave(&chain
->lock
, flags
);
703 descr
= card
->tx_chain
.head
;
704 if (descr
->next
== chain
->tail
->prev
) {
705 spin_unlock_irqrestore(&chain
->lock
, flags
);
706 pci_unmap_single(card
->pdev
, buf
, skb
->len
, PCI_DMA_TODEVICE
);
709 hwdescr
= descr
->hwdescr
;
710 chain
->head
= descr
->next
;
713 hwdescr
->buf_addr
= buf
;
714 hwdescr
->buf_size
= skb
->len
;
715 hwdescr
->next_descr_addr
= 0;
716 hwdescr
->data_status
= 0;
718 hwdescr
->dmac_cmd_status
=
719 SPIDER_NET_DESCR_CARDOWNED
| SPIDER_NET_DMAC_NOCS
;
720 spin_unlock_irqrestore(&chain
->lock
, flags
);
722 if (skb
->protocol
== htons(ETH_P_IP
) && skb
->ip_summed
== CHECKSUM_PARTIAL
)
723 switch (skb
->nh
.iph
->protocol
) {
725 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_TCP
;
728 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_UDP
;
732 /* Chain the bus address, so that the DMA engine finds this descr. */
734 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
736 card
->netdev
->trans_start
= jiffies
; /* set netdev watchdog timer */
741 spider_net_set_low_watermark(struct spider_net_card
*card
)
743 struct spider_net_descr
*descr
= card
->tx_chain
.tail
;
744 struct spider_net_hw_descr
*hwdescr
;
750 /* Measure the length of the queue. Measurement does not
751 * need to be precise -- does not need a lock. */
752 while (descr
!= card
->tx_chain
.head
) {
753 status
= descr
->hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_NOT_IN_USE
;
754 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
760 /* If TX queue is short, don't even bother with interrupts */
761 if (cnt
< card
->tx_chain
.num_desc
/4)
764 /* Set low-watermark 3/4th's of the way into the queue. */
765 descr
= card
->tx_chain
.tail
;
770 /* Set the new watermark, clear the old watermark */
771 spin_lock_irqsave(&card
->tx_chain
.lock
, flags
);
772 descr
->hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_TXDESFLG
;
773 if (card
->low_watermark
&& card
->low_watermark
!= descr
) {
774 hwdescr
= card
->low_watermark
->hwdescr
;
775 hwdescr
->dmac_cmd_status
=
776 hwdescr
->dmac_cmd_status
& ~SPIDER_NET_DESCR_TXDESFLG
;
778 card
->low_watermark
= descr
;
779 spin_unlock_irqrestore(&card
->tx_chain
.lock
, flags
);
784 * spider_net_release_tx_chain - processes sent tx descriptors
785 * @card: adapter structure
786 * @brutal: if set, don't care about whether descriptor seems to be in use
788 * returns 0 if the tx ring is empty, otherwise 1.
790 * spider_net_release_tx_chain releases the tx descriptors that spider has
791 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
792 * If some other context is calling this function, we return 1 so that we're
793 * scheduled again (if we were scheduled) and will not loose initiative.
796 spider_net_release_tx_chain(struct spider_net_card
*card
, int brutal
)
798 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
799 struct spider_net_descr
*descr
;
800 struct spider_net_hw_descr
*hwdescr
;
807 spin_lock_irqsave(&chain
->lock
, flags
);
808 if (chain
->tail
== chain
->head
) {
809 spin_unlock_irqrestore(&chain
->lock
, flags
);
813 hwdescr
= descr
->hwdescr
;
815 status
= spider_net_get_descr_status(hwdescr
);
817 case SPIDER_NET_DESCR_COMPLETE
:
818 card
->netdev_stats
.tx_packets
++;
819 card
->netdev_stats
.tx_bytes
+= descr
->skb
->len
;
822 case SPIDER_NET_DESCR_CARDOWNED
:
824 spin_unlock_irqrestore(&chain
->lock
, flags
);
828 /* fallthrough, if we release the descriptors
829 * brutally (then we don't care about
830 * SPIDER_NET_DESCR_CARDOWNED) */
832 case SPIDER_NET_DESCR_RESPONSE_ERROR
:
833 case SPIDER_NET_DESCR_PROTECTION_ERROR
:
834 case SPIDER_NET_DESCR_FORCE_END
:
835 if (netif_msg_tx_err(card
))
836 pr_err("%s: forcing end of tx descriptor "
837 "with status x%02x\n",
838 card
->netdev
->name
, status
);
839 card
->netdev_stats
.tx_errors
++;
843 card
->netdev_stats
.tx_dropped
++;
845 spin_unlock_irqrestore(&chain
->lock
, flags
);
850 chain
->tail
= descr
->next
;
851 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_NOT_IN_USE
;
854 buf_addr
= hwdescr
->buf_addr
;
855 spin_unlock_irqrestore(&chain
->lock
, flags
);
859 pci_unmap_single(card
->pdev
, buf_addr
, skb
->len
,
868 * spider_net_kick_tx_dma - enables TX DMA processing
869 * @card: card structure
870 * @descr: descriptor address to enable TX processing at
872 * This routine will start the transmit DMA running if
873 * it is not already running. This routine ned only be
874 * called when queueing a new packet to an empty tx queue.
875 * Writes the current tx chain head as start address
876 * of the tx descriptor chain and enables the transmission
880 spider_net_kick_tx_dma(struct spider_net_card
*card
)
882 struct spider_net_descr
*descr
;
884 if (spider_net_read_reg(card
, SPIDER_NET_GDTDMACCNTR
) &
885 SPIDER_NET_TX_DMA_EN
)
888 descr
= card
->tx_chain
.tail
;
890 if (spider_net_get_descr_status(descr
->hwdescr
) ==
891 SPIDER_NET_DESCR_CARDOWNED
) {
892 spider_net_write_reg(card
, SPIDER_NET_GDTDCHA
,
894 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
895 SPIDER_NET_DMA_TX_VALUE
);
898 if (descr
== card
->tx_chain
.head
)
904 mod_timer(&card
->tx_timer
, jiffies
+ SPIDER_NET_TX_TIMER
);
908 * spider_net_xmit - transmits a frame over the device
909 * @skb: packet to send out
910 * @netdev: interface device structure
912 * returns 0 on success, !0 on failure
915 spider_net_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
918 struct spider_net_card
*card
= netdev_priv(netdev
);
920 spider_net_release_tx_chain(card
, 0);
922 if (spider_net_prepare_tx_descr(card
, skb
) != 0) {
923 card
->netdev_stats
.tx_dropped
++;
924 netif_stop_queue(netdev
);
925 return NETDEV_TX_BUSY
;
928 cnt
= spider_net_set_low_watermark(card
);
930 spider_net_kick_tx_dma(card
);
935 * spider_net_cleanup_tx_ring - cleans up the TX ring
936 * @card: card structure
938 * spider_net_cleanup_tx_ring is called by either the tx_timer
939 * or from the NAPI polling routine.
940 * This routine releases resources associted with transmitted
941 * packets, including updating the queue tail pointer.
944 spider_net_cleanup_tx_ring(struct spider_net_card
*card
)
946 if ((spider_net_release_tx_chain(card
, 0) != 0) &&
947 (card
->netdev
->flags
& IFF_UP
)) {
948 spider_net_kick_tx_dma(card
);
949 netif_wake_queue(card
->netdev
);
954 * spider_net_do_ioctl - called for device ioctls
955 * @netdev: interface device structure
956 * @ifr: request parameter structure for ioctl
957 * @cmd: command code for ioctl
959 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
960 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
963 spider_net_do_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
972 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
973 * @descr: descriptor to process
974 * @card: card structure
976 * Fills out skb structure and passes the data to the stack.
977 * The descriptor state is not changed.
980 spider_net_pass_skb_up(struct spider_net_descr
*descr
,
981 struct spider_net_card
*card
)
983 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
985 struct net_device
*netdev
;
986 u32 data_status
, data_error
;
988 data_status
= hwdescr
->data_status
;
989 data_error
= hwdescr
->data_error
;
990 netdev
= card
->netdev
;
994 skb_put(skb
, hwdescr
->valid_size
);
996 /* the card seems to add 2 bytes of junk in front
997 * of the ethernet frame */
998 #define SPIDER_MISALIGN 2
999 skb_pull(skb
, SPIDER_MISALIGN
);
1000 skb
->protocol
= eth_type_trans(skb
, netdev
);
1002 /* checksum offload */
1003 if (card
->options
.rx_csum
) {
1004 if ( ( (data_status
& SPIDER_NET_DATA_STATUS_CKSUM_MASK
) ==
1005 SPIDER_NET_DATA_STATUS_CKSUM_MASK
) &&
1006 !(data_error
& SPIDER_NET_DATA_ERR_CKSUM_MASK
))
1007 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1009 skb
->ip_summed
= CHECKSUM_NONE
;
1011 skb
->ip_summed
= CHECKSUM_NONE
;
1013 if (data_status
& SPIDER_NET_VLAN_PACKET
) {
1014 /* further enhancements: HW-accel VLAN
1015 * vlan_hwaccel_receive_skb
1019 /* pass skb up to stack */
1020 netif_receive_skb(skb
);
1022 /* update netdevice statistics */
1023 card
->netdev_stats
.rx_packets
++;
1024 card
->netdev_stats
.rx_bytes
+= skb
->len
;
1028 static void show_rx_chain(struct spider_net_card
*card
)
1030 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1031 struct spider_net_descr
*start
= chain
->tail
;
1032 struct spider_net_descr
*descr
= start
;
1036 int cstat
= spider_net_get_descr_status(descr
);
1037 printk(KERN_INFO
"RX chain tail at descr=%ld\n",
1038 (start
- card
->descr
) - card
->tx_chain
.num_desc
);
1042 status
= spider_net_get_descr_status(descr
);
1043 if (cstat
!= status
) {
1044 printk(KERN_INFO
"Have %d descrs with stat=x%08x\n", cnt
, cstat
);
1049 descr
= descr
->next
;
1050 } while (descr
!= start
);
1051 printk(KERN_INFO
"Last %d descrs with stat=x%08x\n", cnt
, cstat
);
1056 * spider_net_decode_one_descr - processes an RX descriptor
1057 * @card: card structure
1059 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1061 * Processes an RX descriptor by iommu-unmapping the data buffer
1062 * and passing the packet up to the stack. This function is called
1063 * in softirq context, e.g. either bottom half from interrupt or
1064 * NAPI polling context.
1067 spider_net_decode_one_descr(struct spider_net_card
*card
)
1069 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1070 struct spider_net_descr
*descr
= chain
->tail
;
1071 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
1074 status
= spider_net_get_descr_status(hwdescr
);
1076 /* Nothing in the descriptor, or ring must be empty */
1077 if ((status
== SPIDER_NET_DESCR_CARDOWNED
) ||
1078 (status
== SPIDER_NET_DESCR_NOT_IN_USE
))
1081 /* descriptor definitively used -- move on tail */
1082 chain
->tail
= descr
->next
;
1084 /* unmap descriptor */
1085 pci_unmap_single(card
->pdev
, hwdescr
->buf_addr
,
1086 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
1088 if ( (status
== SPIDER_NET_DESCR_RESPONSE_ERROR
) ||
1089 (status
== SPIDER_NET_DESCR_PROTECTION_ERROR
) ||
1090 (status
== SPIDER_NET_DESCR_FORCE_END
) ) {
1091 if (netif_msg_rx_err(card
))
1092 pr_err("%s: dropping RX descriptor with state %d\n",
1093 card
->netdev
->name
, status
);
1094 card
->netdev_stats
.rx_dropped
++;
1098 if ( (status
!= SPIDER_NET_DESCR_COMPLETE
) &&
1099 (status
!= SPIDER_NET_DESCR_FRAME_END
) ) {
1100 if (netif_msg_rx_err(card
))
1101 pr_err("%s: RX descriptor with unknown state %d\n",
1102 card
->netdev
->name
, status
);
1103 card
->spider_stats
.rx_desc_unk_state
++;
1107 /* The cases we'll throw away the packet immediately */
1108 if (hwdescr
->data_error
& SPIDER_NET_DESTROY_RX_FLAGS
) {
1109 if (netif_msg_rx_err(card
))
1110 pr_err("%s: error in received descriptor found, "
1111 "data_status=x%08x, data_error=x%08x\n",
1113 hwdescr
->data_status
, hwdescr
->data_error
);
1117 if (hwdescr
->dmac_cmd_status
& 0xfefe) {
1118 pr_err("%s: bad status, cmd_status=x%08x\n",
1120 hwdescr
->dmac_cmd_status
);
1121 pr_err("buf_addr=x%08x\n", hwdescr
->buf_addr
);
1122 pr_err("buf_size=x%08x\n", hwdescr
->buf_size
);
1123 pr_err("next_descr_addr=x%08x\n", hwdescr
->next_descr_addr
);
1124 pr_err("result_size=x%08x\n", hwdescr
->result_size
);
1125 pr_err("valid_size=x%08x\n", hwdescr
->valid_size
);
1126 pr_err("data_status=x%08x\n", hwdescr
->data_status
);
1127 pr_err("data_error=x%08x\n", hwdescr
->data_error
);
1128 pr_err("which=%ld\n", descr
- card
->rx_chain
.ring
);
1130 card
->spider_stats
.rx_desc_error
++;
1134 /* Ok, we've got a packet in descr */
1135 spider_net_pass_skb_up(descr
, card
);
1136 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1140 dev_kfree_skb_irq(descr
->skb
);
1142 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1147 * spider_net_poll - NAPI poll function called by the stack to return packets
1148 * @netdev: interface device structure
1149 * @budget: number of packets we can pass to the stack at most
1151 * returns 0 if no more packets available to the driver/stack. Returns 1,
1152 * if the quota is exceeded, but the driver has still packets.
1154 * spider_net_poll returns all packets from the rx descriptors to the stack
1155 * (using netif_receive_skb). If all/enough packets are up, the driver
1156 * reenables interrupts and returns 0. If not, 1 is returned.
1159 spider_net_poll(struct net_device
*netdev
, int *budget
)
1161 struct spider_net_card
*card
= netdev_priv(netdev
);
1162 int packets_to_do
, packets_done
= 0;
1163 int no_more_packets
= 0;
1165 spider_net_cleanup_tx_ring(card
);
1166 packets_to_do
= min(*budget
, netdev
->quota
);
1168 while (packets_to_do
) {
1169 if (spider_net_decode_one_descr(card
)) {
1173 /* no more packets for the stack */
1174 no_more_packets
= 1;
1179 netdev
->quota
-= packets_done
;
1180 *budget
-= packets_done
;
1181 spider_net_refill_rx_chain(card
);
1182 spider_net_enable_rxdmac(card
);
1184 /* if all packets are in the stack, enable interrupts and return 0 */
1185 /* if not, return 1 */
1186 if (no_more_packets
) {
1187 netif_rx_complete(netdev
);
1188 spider_net_rx_irq_on(card
);
1196 * spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card
1197 * @netdev: interface device structure
1198 * @grp: vlan_group structure that is registered (NULL on destroying interface)
1201 spider_net_vlan_rx_reg(struct net_device
*netdev
, struct vlan_group
*grp
)
1203 /* further enhancement... yet to do */
1208 * spider_net_vlan_rx_add - adds VLAN id to the card filter
1209 * @netdev: interface device structure
1210 * @vid: VLAN id to add
1213 spider_net_vlan_rx_add(struct net_device
*netdev
, uint16_t vid
)
1215 /* further enhancement... yet to do */
1216 /* add vid to card's VLAN filter table */
1221 * spider_net_vlan_rx_kill - removes VLAN id to the card filter
1222 * @netdev: interface device structure
1223 * @vid: VLAN id to remove
1226 spider_net_vlan_rx_kill(struct net_device
*netdev
, uint16_t vid
)
1228 /* further enhancement... yet to do */
1229 /* remove vid from card's VLAN filter table */
1233 * spider_net_get_stats - get interface statistics
1234 * @netdev: interface device structure
1236 * returns the interface statistics residing in the spider_net_card struct
1238 static struct net_device_stats
*
1239 spider_net_get_stats(struct net_device
*netdev
)
1241 struct spider_net_card
*card
= netdev_priv(netdev
);
1242 struct net_device_stats
*stats
= &card
->netdev_stats
;
1247 * spider_net_change_mtu - changes the MTU of an interface
1248 * @netdev: interface device structure
1249 * @new_mtu: new MTU value
1251 * returns 0 on success, <0 on failure
1254 spider_net_change_mtu(struct net_device
*netdev
, int new_mtu
)
1256 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1257 * and mtu is outbound only anyway */
1258 if ( (new_mtu
< SPIDER_NET_MIN_MTU
) ||
1259 (new_mtu
> SPIDER_NET_MAX_MTU
) )
1261 netdev
->mtu
= new_mtu
;
1266 * spider_net_set_mac - sets the MAC of an interface
1267 * @netdev: interface device structure
1268 * @ptr: pointer to new MAC address
1270 * Returns 0 on success, <0 on failure. Currently, we don't support this
1271 * and will always return EOPNOTSUPP.
1274 spider_net_set_mac(struct net_device
*netdev
, void *p
)
1276 struct spider_net_card
*card
= netdev_priv(netdev
);
1277 u32 macl
, macu
, regvalue
;
1278 struct sockaddr
*addr
= p
;
1280 if (!is_valid_ether_addr(addr
->sa_data
))
1281 return -EADDRNOTAVAIL
;
1283 /* switch off GMACTPE and GMACRPE */
1284 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1285 regvalue
&= ~((1 << 5) | (1 << 6));
1286 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1289 macu
= (addr
->sa_data
[0]<<24) + (addr
->sa_data
[1]<<16) +
1290 (addr
->sa_data
[2]<<8) + (addr
->sa_data
[3]);
1291 macl
= (addr
->sa_data
[4]<<8) + (addr
->sa_data
[5]);
1292 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACU
, macu
);
1293 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACL
, macl
);
1295 /* switch GMACTPE and GMACRPE back on */
1296 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1297 regvalue
|= ((1 << 5) | (1 << 6));
1298 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1300 spider_net_set_promisc(card
);
1302 /* look up, whether we have been successful */
1303 if (spider_net_get_mac_address(netdev
))
1304 return -EADDRNOTAVAIL
;
1305 if (memcmp(netdev
->dev_addr
,addr
->sa_data
,netdev
->addr_len
))
1306 return -EADDRNOTAVAIL
;
1312 * spider_net_link_reset
1313 * @netdev: net device structure
1315 * This is called when the PHY_LINK signal is asserted. For the blade this is
1316 * not connected so we should never get here.
1320 spider_net_link_reset(struct net_device
*netdev
)
1323 struct spider_net_card
*card
= netdev_priv(netdev
);
1325 del_timer_sync(&card
->aneg_timer
);
1327 /* clear interrupt, block further interrupts */
1328 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
1329 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
1330 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1332 /* reset phy and setup aneg */
1333 spider_net_setup_aneg(card
);
1334 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1339 * spider_net_handle_error_irq - handles errors raised by an interrupt
1340 * @card: card structure
1341 * @status_reg: interrupt status register 0 (GHIINT0STS)
1343 * spider_net_handle_error_irq treats or ignores all error conditions
1344 * found when an interrupt is presented
1347 spider_net_handle_error_irq(struct spider_net_card
*card
, u32 status_reg
)
1349 u32 error_reg1
, error_reg2
;
1353 error_reg1
= spider_net_read_reg(card
, SPIDER_NET_GHIINT1STS
);
1354 error_reg2
= spider_net_read_reg(card
, SPIDER_NET_GHIINT2STS
);
1356 /* check GHIINT0STS ************************************/
1358 for (i
= 0; i
< 32; i
++)
1359 if (status_reg
& (1<<i
))
1362 /* let error_reg1 and error_reg2 evaluation decide, what to do
1363 case SPIDER_NET_PHYINT:
1364 case SPIDER_NET_GMAC2INT:
1365 case SPIDER_NET_GMAC1INT:
1366 case SPIDER_NET_GFIFOINT:
1367 case SPIDER_NET_DMACINT:
1368 case SPIDER_NET_GSYSINT:
1371 case SPIDER_NET_GIPSINT
:
1375 case SPIDER_NET_GPWOPCMPINT
:
1376 /* PHY write operation completed */
1379 case SPIDER_NET_GPROPCMPINT
:
1380 /* PHY read operation completed */
1381 /* we don't use semaphores, as we poll for the completion
1382 * of the read operation in spider_net_read_phy. Should take
1386 case SPIDER_NET_GPWFFINT
:
1387 /* PHY command queue full */
1388 if (netif_msg_intr(card
))
1389 pr_err("PHY write queue full\n");
1393 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1394 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1395 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1397 case SPIDER_NET_GDTDEN0INT
:
1398 /* someone has set TX_DMA_EN to 0 */
1402 case SPIDER_NET_GDDDEN0INT
: /* fallthrough */
1403 case SPIDER_NET_GDCDEN0INT
: /* fallthrough */
1404 case SPIDER_NET_GDBDEN0INT
: /* fallthrough */
1405 case SPIDER_NET_GDADEN0INT
:
1406 /* someone has set RX_DMA_EN to 0 */
1411 case SPIDER_NET_GDDFDCINT
:
1412 case SPIDER_NET_GDCFDCINT
:
1413 case SPIDER_NET_GDBFDCINT
:
1414 case SPIDER_NET_GDAFDCINT
:
1415 /* case SPIDER_NET_GDNMINT: not used. print a message */
1416 /* case SPIDER_NET_GCNMINT: not used. print a message */
1417 /* case SPIDER_NET_GBNMINT: not used. print a message */
1418 /* case SPIDER_NET_GANMINT: not used. print a message */
1419 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1424 case SPIDER_NET_GDTFDCINT
:
1427 case SPIDER_NET_GTTEDINT
:
1430 case SPIDER_NET_GDTDCEINT
:
1431 /* chain end. If a descriptor should be sent, kick off
1433 if (card->tx_chain.tail != card->tx_chain.head)
1434 spider_net_kick_tx_dma(card);
1439 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1440 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1443 /* check GHIINT1STS ************************************/
1445 for (i
= 0; i
< 32; i
++)
1446 if (error_reg1
& (1<<i
))
1449 case SPIDER_NET_GTMFLLINT
:
1450 /* TX RAM full may happen on a usual case.
1451 * Logging is not needed. */
1454 case SPIDER_NET_GRFDFLLINT
: /* fallthrough */
1455 case SPIDER_NET_GRFCFLLINT
: /* fallthrough */
1456 case SPIDER_NET_GRFBFLLINT
: /* fallthrough */
1457 case SPIDER_NET_GRFAFLLINT
: /* fallthrough */
1458 case SPIDER_NET_GRMFLLINT
:
1459 if (netif_msg_intr(card
) && net_ratelimit())
1460 pr_err("Spider RX RAM full, incoming packets "
1461 "might be discarded!\n");
1462 spider_net_rx_irq_off(card
);
1463 netif_rx_schedule(card
->netdev
);
1467 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1468 case SPIDER_NET_GDTINVDINT
:
1469 /* allrighty. tx from previous descr ok */
1474 case SPIDER_NET_GDDDCEINT
: /* fallthrough */
1475 case SPIDER_NET_GDCDCEINT
: /* fallthrough */
1476 case SPIDER_NET_GDBDCEINT
: /* fallthrough */
1477 case SPIDER_NET_GDADCEINT
:
1478 if (netif_msg_intr(card
) && net_ratelimit())
1479 pr_err("got descriptor chain end interrupt, "
1480 "restarting DMAC %c.\n",
1481 'D'-(i
-SPIDER_NET_GDDDCEINT
)/3);
1482 spider_net_refill_rx_chain(card
);
1483 spider_net_enable_rxdmac(card
);
1487 /* invalid descriptor */
1488 case SPIDER_NET_GDDINVDINT
: /* fallthrough */
1489 case SPIDER_NET_GDCINVDINT
: /* fallthrough */
1490 case SPIDER_NET_GDBINVDINT
: /* fallthrough */
1491 case SPIDER_NET_GDAINVDINT
:
1492 /* could happen when rx chain is full */
1493 spider_net_refill_rx_chain(card
);
1494 spider_net_enable_rxdmac(card
);
1498 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1499 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1500 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1501 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1502 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1503 /* case SPIDER_NET_GDSERINT: problem, print a message */
1504 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1505 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1506 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1507 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1508 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1514 /* check GHIINT2STS ************************************/
1516 for (i
= 0; i
< 32; i
++)
1517 if (error_reg2
& (1<<i
))
1520 /* there is nothing we can (want to) do at this time. Log a
1521 * message, we can switch on and off the specific values later on
1522 case SPIDER_NET_GPROPERINT:
1523 case SPIDER_NET_GMCTCRSNGINT:
1524 case SPIDER_NET_GMCTLCOLINT:
1525 case SPIDER_NET_GMCTTMOTINT:
1526 case SPIDER_NET_GMCRCAERINT:
1527 case SPIDER_NET_GMCRCALERINT:
1528 case SPIDER_NET_GMCRALNERINT:
1529 case SPIDER_NET_GMCROVRINT:
1530 case SPIDER_NET_GMCRRNTINT:
1531 case SPIDER_NET_GMCRRXERINT:
1532 case SPIDER_NET_GTITCSERINT:
1533 case SPIDER_NET_GTIFMTERINT:
1534 case SPIDER_NET_GTIPKTRVKINT:
1535 case SPIDER_NET_GTISPINGINT:
1536 case SPIDER_NET_GTISADNGINT:
1537 case SPIDER_NET_GTISPDNGINT:
1538 case SPIDER_NET_GRIFMTERINT:
1539 case SPIDER_NET_GRIPKTRVKINT:
1540 case SPIDER_NET_GRISPINGINT:
1541 case SPIDER_NET_GRISADNGINT:
1542 case SPIDER_NET_GRISPDNGINT:
1549 if ((show_error
) && (netif_msg_intr(card
)) && net_ratelimit())
1550 pr_err("Got error interrupt on %s, GHIINT0STS = 0x%08x, "
1551 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1553 status_reg
, error_reg1
, error_reg2
);
1555 /* clear interrupt sources */
1556 spider_net_write_reg(card
, SPIDER_NET_GHIINT1STS
, error_reg1
);
1557 spider_net_write_reg(card
, SPIDER_NET_GHIINT2STS
, error_reg2
);
1561 * spider_net_interrupt - interrupt handler for spider_net
1562 * @irq: interupt number
1563 * @ptr: pointer to net_device
1564 * @regs: PU registers
1566 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1567 * interrupt found raised by card.
1569 * This is the interrupt handler, that turns off
1570 * interrupts for this device and makes the stack poll the driver
1573 spider_net_interrupt(int irq
, void *ptr
)
1575 struct net_device
*netdev
= ptr
;
1576 struct spider_net_card
*card
= netdev_priv(netdev
);
1579 status_reg
= spider_net_read_reg(card
, SPIDER_NET_GHIINT0STS
);
1584 if (status_reg
& SPIDER_NET_RXINT
) {
1585 spider_net_rx_irq_off(card
);
1586 netif_rx_schedule(netdev
);
1588 if (status_reg
& SPIDER_NET_TXINT
)
1589 netif_rx_schedule(netdev
);
1591 if (status_reg
& SPIDER_NET_LINKINT
)
1592 spider_net_link_reset(netdev
);
1594 if (status_reg
& SPIDER_NET_ERRINT
)
1595 spider_net_handle_error_irq(card
, status_reg
);
1597 /* clear interrupt sources */
1598 spider_net_write_reg(card
, SPIDER_NET_GHIINT0STS
, status_reg
);
1603 #ifdef CONFIG_NET_POLL_CONTROLLER
1605 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1606 * @netdev: interface device structure
1608 * see Documentation/networking/netconsole.txt
1611 spider_net_poll_controller(struct net_device
*netdev
)
1613 disable_irq(netdev
->irq
);
1614 spider_net_interrupt(netdev
->irq
, netdev
);
1615 enable_irq(netdev
->irq
);
1617 #endif /* CONFIG_NET_POLL_CONTROLLER */
1620 * spider_net_init_card - initializes the card
1621 * @card: card structure
1623 * spider_net_init_card initializes the card so that other registers can
1627 spider_net_init_card(struct spider_net_card
*card
)
1629 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1630 SPIDER_NET_CKRCTRL_STOP_VALUE
);
1632 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1633 SPIDER_NET_CKRCTRL_RUN_VALUE
);
1635 /* trigger ETOMOD signal */
1636 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1637 spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
) | 0x4);
1642 * spider_net_enable_card - enables the card by setting all kinds of regs
1643 * @card: card structure
1645 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1648 spider_net_enable_card(struct spider_net_card
*card
)
1651 /* the following array consists of (register),(value) pairs
1652 * that are set in this function. A register of 0 ends the list */
1654 { SPIDER_NET_GRESUMINTNUM
, 0 },
1655 { SPIDER_NET_GREINTNUM
, 0 },
1657 /* set interrupt frame number registers */
1658 /* clear the single DMA engine registers first */
1659 { SPIDER_NET_GFAFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1660 { SPIDER_NET_GFBFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1661 { SPIDER_NET_GFCFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1662 { SPIDER_NET_GFDFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1663 /* then set, what we really need */
1664 { SPIDER_NET_GFFRMNUM
, SPIDER_NET_FRAMENUM_VALUE
},
1666 /* timer counter registers and stuff */
1667 { SPIDER_NET_GFREECNNUM
, 0 },
1668 { SPIDER_NET_GONETIMENUM
, 0 },
1669 { SPIDER_NET_GTOUTFRMNUM
, 0 },
1671 /* RX mode setting */
1672 { SPIDER_NET_GRXMDSET
, SPIDER_NET_RXMODE_VALUE
},
1673 /* TX mode setting */
1674 { SPIDER_NET_GTXMDSET
, SPIDER_NET_TXMODE_VALUE
},
1675 /* IPSEC mode setting */
1676 { SPIDER_NET_GIPSECINIT
, SPIDER_NET_IPSECINIT_VALUE
},
1678 { SPIDER_NET_GFTRESTRT
, SPIDER_NET_RESTART_VALUE
},
1680 { SPIDER_NET_GMRWOLCTRL
, 0 },
1681 { SPIDER_NET_GTESTMD
, 0x10000000 },
1682 { SPIDER_NET_GTTQMSK
, 0x00400040 },
1684 { SPIDER_NET_GMACINTEN
, 0 },
1686 /* flow control stuff */
1687 { SPIDER_NET_GMACAPAUSE
, SPIDER_NET_MACAPAUSE_VALUE
},
1688 { SPIDER_NET_GMACTXPAUSE
, SPIDER_NET_TXPAUSE_VALUE
},
1690 { SPIDER_NET_GMACBSTLMT
, SPIDER_NET_BURSTLMT_VALUE
},
1695 while (regs
[i
][0]) {
1696 spider_net_write_reg(card
, regs
[i
][0], regs
[i
][1]);
1700 /* clear unicast filter table entries 1 to 14 */
1701 for (i
= 1; i
<= 14; i
++) {
1702 spider_net_write_reg(card
,
1703 SPIDER_NET_GMRUAFILnR
+ i
* 8,
1705 spider_net_write_reg(card
,
1706 SPIDER_NET_GMRUAFILnR
+ i
* 8 + 4,
1710 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
, 0x08080000);
1712 spider_net_write_reg(card
, SPIDER_NET_ECMODE
, SPIDER_NET_ECMODE_VALUE
);
1714 /* set chain tail adress for RX chains and
1716 spider_net_enable_rxchtails(card
);
1717 spider_net_enable_rxdmac(card
);
1719 spider_net_write_reg(card
, SPIDER_NET_GRXDMAEN
, SPIDER_NET_WOL_VALUE
);
1721 spider_net_write_reg(card
, SPIDER_NET_GMACLENLMT
,
1722 SPIDER_NET_LENLMT_VALUE
);
1723 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1724 SPIDER_NET_OPMODE_VALUE
);
1726 /* set interrupt mask registers */
1727 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
,
1728 SPIDER_NET_INT0_MASK_VALUE
);
1729 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
,
1730 SPIDER_NET_INT1_MASK_VALUE
);
1731 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
,
1732 SPIDER_NET_INT2_MASK_VALUE
);
1734 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
1735 SPIDER_NET_GDTBSTA
);
1739 * spider_net_download_firmware - loads firmware into the adapter
1740 * @card: card structure
1741 * @firmware_ptr: pointer to firmware data
1743 * spider_net_download_firmware loads the firmware data into the
1744 * adapter. It assumes the length etc. to be allright.
1747 spider_net_download_firmware(struct spider_net_card
*card
,
1748 const void *firmware_ptr
)
1751 const u32
*fw_ptr
= firmware_ptr
;
1753 /* stop sequencers */
1754 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1755 SPIDER_NET_STOP_SEQ_VALUE
);
1757 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
1759 spider_net_write_reg(card
,
1760 SPIDER_NET_GSnPRGADR
+ sequencer
* 8, 0);
1761 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
1762 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
1763 sequencer
* 8, *fw_ptr
);
1768 if (spider_net_read_reg(card
, SPIDER_NET_GSINIT
))
1771 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1772 SPIDER_NET_RUN_SEQ_VALUE
);
1778 * spider_net_init_firmware - reads in firmware parts
1779 * @card: card structure
1781 * Returns 0 on success, <0 on failure
1783 * spider_net_init_firmware opens the sequencer firmware and does some basic
1784 * checks. This function opens and releases the firmware structure. A call
1785 * to download the firmware is performed before the release.
1789 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1790 * the program for each sequencer. Use the command
1791 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1792 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1793 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1795 * to generate spider_fw.bin, if you have sequencer programs with something
1796 * like the following contents for each sequencer:
1797 * <ONE LINE COMMENT>
1798 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1799 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1801 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1804 spider_net_init_firmware(struct spider_net_card
*card
)
1806 struct firmware
*firmware
= NULL
;
1807 struct device_node
*dn
;
1808 const u8
*fw_prop
= NULL
;
1812 if (request_firmware((const struct firmware
**)&firmware
,
1813 SPIDER_NET_FIRMWARE_NAME
, &card
->pdev
->dev
) == 0) {
1814 if ( (firmware
->size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1815 netif_msg_probe(card
) ) {
1816 pr_err("Incorrect size of spidernet firmware in " \
1817 "filesystem. Looking in host firmware...\n");
1820 err
= spider_net_download_firmware(card
, firmware
->data
);
1822 release_firmware(firmware
);
1830 dn
= pci_device_to_OF_node(card
->pdev
);
1834 fw_prop
= get_property(dn
, "firmware", &fw_size
);
1838 if ( (fw_size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1839 netif_msg_probe(card
) ) {
1840 pr_err("Incorrect size of spidernet firmware in " \
1845 err
= spider_net_download_firmware(card
, fw_prop
);
1850 if (netif_msg_probe(card
))
1851 pr_err("Couldn't find spidernet firmware in filesystem " \
1852 "or host firmware\n");
1857 * spider_net_open - called upon ifonfig up
1858 * @netdev: interface device structure
1860 * returns 0 on success, <0 on failure
1862 * spider_net_open allocates all the descriptors and memory needed for
1863 * operation, sets up multicast list and enables interrupts
1866 spider_net_open(struct net_device
*netdev
)
1868 struct spider_net_card
*card
= netdev_priv(netdev
);
1871 result
= spider_net_init_firmware(card
);
1873 goto init_firmware_failed
;
1875 /* start probing with copper */
1876 spider_net_setup_aneg(card
);
1877 if (card
->phy
.def
->phy_id
)
1878 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1880 result
= spider_net_init_chain(card
, &card
->tx_chain
);
1882 goto alloc_tx_failed
;
1883 card
->low_watermark
= NULL
;
1885 result
= spider_net_init_chain(card
, &card
->rx_chain
);
1887 goto alloc_rx_failed
;
1889 /* Allocate rx skbs */
1890 if (spider_net_alloc_rx_skbs(card
))
1891 goto alloc_skbs_failed
;
1893 spider_net_set_multi(netdev
);
1895 /* further enhancement: setup hw vlan, if needed */
1898 if (request_irq(netdev
->irq
, spider_net_interrupt
,
1899 IRQF_SHARED
, netdev
->name
, netdev
))
1900 goto register_int_failed
;
1902 spider_net_enable_card(card
);
1904 netif_start_queue(netdev
);
1905 netif_carrier_on(netdev
);
1906 netif_poll_enable(netdev
);
1910 register_int_failed
:
1911 spider_net_free_rx_chain_contents(card
);
1913 spider_net_free_chain(card
, &card
->rx_chain
);
1915 spider_net_free_chain(card
, &card
->tx_chain
);
1917 del_timer_sync(&card
->aneg_timer
);
1918 init_firmware_failed
:
1923 * spider_net_link_phy
1924 * @data: used for pointer to card structure
1927 static void spider_net_link_phy(unsigned long data
)
1929 struct spider_net_card
*card
= (struct spider_net_card
*)data
;
1930 struct mii_phy
*phy
= &card
->phy
;
1932 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
1933 if (card
->aneg_count
> SPIDER_NET_ANEG_TIMEOUT
) {
1935 pr_info("%s: link is down trying to bring it up\n", card
->netdev
->name
);
1937 switch (card
->medium
) {
1938 case BCM54XX_COPPER
:
1939 /* enable fiber with autonegotiation first */
1940 if (phy
->def
->ops
->enable_fiber
)
1941 phy
->def
->ops
->enable_fiber(phy
, 1);
1942 card
->medium
= BCM54XX_FIBER
;
1946 /* fiber didn't come up, try to disable fiber autoneg */
1947 if (phy
->def
->ops
->enable_fiber
)
1948 phy
->def
->ops
->enable_fiber(phy
, 0);
1949 card
->medium
= BCM54XX_UNKNOWN
;
1952 case BCM54XX_UNKNOWN
:
1953 /* copper, fiber with and without failed,
1954 * retry from beginning */
1955 spider_net_setup_aneg(card
);
1956 card
->medium
= BCM54XX_COPPER
;
1960 card
->aneg_count
= 0;
1961 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1965 /* link still not up, try again later */
1966 if (!(phy
->def
->ops
->poll_link(phy
))) {
1968 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1972 /* link came up, get abilities */
1973 phy
->def
->ops
->read_link(phy
);
1975 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
1976 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
1977 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0x4);
1979 if (phy
->speed
== 1000)
1980 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0x00000001);
1982 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0);
1984 card
->aneg_count
= 0;
1986 pr_debug("Found %s with %i Mbps, %s-duplex %sautoneg.\n",
1987 phy
->def
->name
, phy
->speed
, phy
->duplex
==1 ? "Full" : "Half",
1988 phy
->autoneg
==1 ? "" : "no ");
1994 * spider_net_setup_phy - setup PHY
1995 * @card: card structure
1997 * returns 0 on success, <0 on failure
1999 * spider_net_setup_phy is used as part of spider_net_probe.
2002 spider_net_setup_phy(struct spider_net_card
*card
)
2004 struct mii_phy
*phy
= &card
->phy
;
2006 spider_net_write_reg(card
, SPIDER_NET_GDTDMASEL
,
2007 SPIDER_NET_DMASEL_VALUE
);
2008 spider_net_write_reg(card
, SPIDER_NET_GPCCTRL
,
2009 SPIDER_NET_PHY_CTRL_VALUE
);
2011 phy
->dev
= card
->netdev
;
2012 phy
->mdio_read
= spider_net_read_phy
;
2013 phy
->mdio_write
= spider_net_write_phy
;
2015 for (phy
->mii_id
= 1; phy
->mii_id
<= 31; phy
->mii_id
++) {
2017 id
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
2018 if (id
!= 0x0000 && id
!= 0xffff) {
2019 if (!mii_phy_probe(phy
, phy
->mii_id
)) {
2020 pr_info("Found %s.\n", phy
->def
->name
);
2030 * spider_net_workaround_rxramfull - work around firmware bug
2031 * @card: card structure
2036 spider_net_workaround_rxramfull(struct spider_net_card
*card
)
2038 int i
, sequencer
= 0;
2041 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2042 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2044 /* empty sequencer data */
2045 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
2047 spider_net_write_reg(card
, SPIDER_NET_GSnPRGADR
+
2048 sequencer
* 8, 0x0);
2049 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
2050 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
2051 sequencer
* 8, 0x0);
2055 /* set sequencer operation */
2056 spider_net_write_reg(card
, SPIDER_NET_GSINIT
, 0x000000fe);
2059 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2060 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2064 * spider_net_stop - called upon ifconfig down
2065 * @netdev: interface device structure
2070 spider_net_stop(struct net_device
*netdev
)
2072 struct spider_net_card
*card
= netdev_priv(netdev
);
2074 netif_poll_disable(netdev
);
2075 netif_carrier_off(netdev
);
2076 netif_stop_queue(netdev
);
2077 del_timer_sync(&card
->tx_timer
);
2078 del_timer_sync(&card
->aneg_timer
);
2080 /* disable/mask all interrupts */
2081 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, 0);
2082 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
, 0);
2083 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
, 0);
2084 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
2086 free_irq(netdev
->irq
, netdev
);
2088 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
2089 SPIDER_NET_DMA_TX_FEND_VALUE
);
2091 /* turn off DMA, force end */
2092 spider_net_disable_rxdmac(card
);
2094 /* release chains */
2095 spider_net_release_tx_chain(card
, 1);
2096 spider_net_free_rx_chain_contents(card
);
2098 spider_net_free_chain(card
, &card
->tx_chain
);
2099 spider_net_free_chain(card
, &card
->rx_chain
);
2105 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2106 * function (to be called not under interrupt status)
2107 * @data: data, is interface device structure
2109 * called as task when tx hangs, resets interface (if interface is up)
2112 spider_net_tx_timeout_task(struct work_struct
*work
)
2114 struct spider_net_card
*card
=
2115 container_of(work
, struct spider_net_card
, tx_timeout_task
);
2116 struct net_device
*netdev
= card
->netdev
;
2118 if (!(netdev
->flags
& IFF_UP
))
2121 netif_device_detach(netdev
);
2122 spider_net_stop(netdev
);
2124 spider_net_workaround_rxramfull(card
);
2125 spider_net_init_card(card
);
2127 if (spider_net_setup_phy(card
))
2130 spider_net_open(netdev
);
2131 spider_net_kick_tx_dma(card
);
2132 netif_device_attach(netdev
);
2135 atomic_dec(&card
->tx_timeout_task_counter
);
2139 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2140 * @netdev: interface device structure
2142 * called, if tx hangs. Schedules a task that resets the interface
2145 spider_net_tx_timeout(struct net_device
*netdev
)
2147 struct spider_net_card
*card
;
2149 card
= netdev_priv(netdev
);
2150 atomic_inc(&card
->tx_timeout_task_counter
);
2151 if (netdev
->flags
& IFF_UP
)
2152 schedule_work(&card
->tx_timeout_task
);
2154 atomic_dec(&card
->tx_timeout_task_counter
);
2155 card
->spider_stats
.tx_timeouts
++;
2159 * spider_net_setup_netdev_ops - initialization of net_device operations
2160 * @netdev: net_device structure
2162 * fills out function pointers in the net_device structure
2165 spider_net_setup_netdev_ops(struct net_device
*netdev
)
2167 netdev
->open
= &spider_net_open
;
2168 netdev
->stop
= &spider_net_stop
;
2169 netdev
->hard_start_xmit
= &spider_net_xmit
;
2170 netdev
->get_stats
= &spider_net_get_stats
;
2171 netdev
->set_multicast_list
= &spider_net_set_multi
;
2172 netdev
->set_mac_address
= &spider_net_set_mac
;
2173 netdev
->change_mtu
= &spider_net_change_mtu
;
2174 netdev
->do_ioctl
= &spider_net_do_ioctl
;
2176 netdev
->tx_timeout
= &spider_net_tx_timeout
;
2177 netdev
->watchdog_timeo
= SPIDER_NET_WATCHDOG_TIMEOUT
;
2179 netdev
->poll
= &spider_net_poll
;
2180 netdev
->weight
= SPIDER_NET_NAPI_WEIGHT
;
2182 netdev
->vlan_rx_register
= &spider_net_vlan_rx_reg
;
2183 netdev
->vlan_rx_add_vid
= &spider_net_vlan_rx_add
;
2184 netdev
->vlan_rx_kill_vid
= &spider_net_vlan_rx_kill
;
2185 #ifdef CONFIG_NET_POLL_CONTROLLER
2186 /* poll controller */
2187 netdev
->poll_controller
= &spider_net_poll_controller
;
2188 #endif /* CONFIG_NET_POLL_CONTROLLER */
2190 netdev
->ethtool_ops
= &spider_net_ethtool_ops
;
2194 * spider_net_setup_netdev - initialization of net_device
2195 * @card: card structure
2197 * Returns 0 on success or <0 on failure
2199 * spider_net_setup_netdev initializes the net_device structure
2202 spider_net_setup_netdev(struct spider_net_card
*card
)
2205 struct net_device
*netdev
= card
->netdev
;
2206 struct device_node
*dn
;
2207 struct sockaddr addr
;
2210 SET_MODULE_OWNER(netdev
);
2211 SET_NETDEV_DEV(netdev
, &card
->pdev
->dev
);
2213 pci_set_drvdata(card
->pdev
, netdev
);
2215 init_timer(&card
->tx_timer
);
2216 card
->tx_timer
.function
=
2217 (void (*)(unsigned long)) spider_net_cleanup_tx_ring
;
2218 card
->tx_timer
.data
= (unsigned long) card
;
2219 netdev
->irq
= card
->pdev
->irq
;
2221 card
->aneg_count
= 0;
2222 init_timer(&card
->aneg_timer
);
2223 card
->aneg_timer
.function
= spider_net_link_phy
;
2224 card
->aneg_timer
.data
= (unsigned long) card
;
2226 card
->options
.rx_csum
= SPIDER_NET_RX_CSUM_DEFAULT
;
2228 spider_net_setup_netdev_ops(netdev
);
2230 netdev
->features
= NETIF_F_HW_CSUM
| NETIF_F_LLTX
;
2231 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2232 * NETIF_F_HW_VLAN_FILTER */
2234 netdev
->irq
= card
->pdev
->irq
;
2236 dn
= pci_device_to_OF_node(card
->pdev
);
2240 mac
= get_property(dn
, "local-mac-address", NULL
);
2243 memcpy(addr
.sa_data
, mac
, ETH_ALEN
);
2245 result
= spider_net_set_mac(netdev
, &addr
);
2246 if ((result
) && (netif_msg_probe(card
)))
2247 pr_err("Failed to set MAC address: %i\n", result
);
2249 result
= register_netdev(netdev
);
2251 if (netif_msg_probe(card
))
2252 pr_err("Couldn't register net_device: %i\n",
2257 if (netif_msg_probe(card
))
2258 pr_info("Initialized device %s.\n", netdev
->name
);
2264 * spider_net_alloc_card - allocates net_device and card structure
2266 * returns the card structure or NULL in case of errors
2268 * the card and net_device structures are linked to each other
2270 static struct spider_net_card
*
2271 spider_net_alloc_card(void)
2273 struct net_device
*netdev
;
2274 struct spider_net_card
*card
;
2277 alloc_size
= sizeof(struct spider_net_card
) +
2278 (tx_descriptors
+ rx_descriptors
) * sizeof(struct spider_net_descr
);
2279 netdev
= alloc_etherdev(alloc_size
);
2283 card
= netdev_priv(netdev
);
2284 card
->netdev
= netdev
;
2285 card
->msg_enable
= SPIDER_NET_DEFAULT_MSG
;
2286 INIT_WORK(&card
->tx_timeout_task
, spider_net_tx_timeout_task
);
2287 init_waitqueue_head(&card
->waitq
);
2288 atomic_set(&card
->tx_timeout_task_counter
, 0);
2290 card
->rx_chain
.num_desc
= rx_descriptors
;
2291 card
->rx_chain
.ring
= card
->darray
;
2292 card
->tx_chain
.num_desc
= tx_descriptors
;
2293 card
->tx_chain
.ring
= card
->darray
+ rx_descriptors
;
2299 * spider_net_undo_pci_setup - releases PCI ressources
2300 * @card: card structure
2302 * spider_net_undo_pci_setup releases the mapped regions
2305 spider_net_undo_pci_setup(struct spider_net_card
*card
)
2307 iounmap(card
->regs
);
2308 pci_release_regions(card
->pdev
);
2312 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2313 * @card: card structure
2316 * Returns the card structure or NULL if any errors occur
2318 * spider_net_setup_pci_dev initializes pdev and together with the
2319 * functions called in spider_net_open configures the device so that
2320 * data can be transferred over it
2321 * The net_device structure is attached to the card structure, if the
2322 * function returns without error.
2324 static struct spider_net_card
*
2325 spider_net_setup_pci_dev(struct pci_dev
*pdev
)
2327 struct spider_net_card
*card
;
2328 unsigned long mmio_start
, mmio_len
;
2330 if (pci_enable_device(pdev
)) {
2331 pr_err("Couldn't enable PCI device\n");
2335 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
2336 pr_err("Couldn't find proper PCI device base address.\n");
2337 goto out_disable_dev
;
2340 if (pci_request_regions(pdev
, spider_net_driver_name
)) {
2341 pr_err("Couldn't obtain PCI resources, aborting.\n");
2342 goto out_disable_dev
;
2345 pci_set_master(pdev
);
2347 card
= spider_net_alloc_card();
2349 pr_err("Couldn't allocate net_device structure, "
2351 goto out_release_regions
;
2355 /* fetch base address and length of first resource */
2356 mmio_start
= pci_resource_start(pdev
, 0);
2357 mmio_len
= pci_resource_len(pdev
, 0);
2359 card
->netdev
->mem_start
= mmio_start
;
2360 card
->netdev
->mem_end
= mmio_start
+ mmio_len
;
2361 card
->regs
= ioremap(mmio_start
, mmio_len
);
2364 pr_err("Couldn't obtain PCI resources, aborting.\n");
2365 goto out_release_regions
;
2370 out_release_regions
:
2371 pci_release_regions(pdev
);
2373 pci_disable_device(pdev
);
2374 pci_set_drvdata(pdev
, NULL
);
2379 * spider_net_probe - initialization of a device
2381 * @ent: entry in the device id list
2383 * Returns 0 on success, <0 on failure
2385 * spider_net_probe initializes pdev and registers a net_device
2386 * structure for it. After that, the device can be ifconfig'ed up
2388 static int __devinit
2389 spider_net_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2392 struct spider_net_card
*card
;
2394 card
= spider_net_setup_pci_dev(pdev
);
2398 spider_net_workaround_rxramfull(card
);
2399 spider_net_init_card(card
);
2401 err
= spider_net_setup_phy(card
);
2405 err
= spider_net_setup_netdev(card
);
2412 spider_net_undo_pci_setup(card
);
2413 free_netdev(card
->netdev
);
2419 * spider_net_remove - removal of a device
2422 * Returns 0 on success, <0 on failure
2424 * spider_net_remove is called to remove the device and unregisters the
2427 static void __devexit
2428 spider_net_remove(struct pci_dev
*pdev
)
2430 struct net_device
*netdev
;
2431 struct spider_net_card
*card
;
2433 netdev
= pci_get_drvdata(pdev
);
2434 card
= netdev_priv(netdev
);
2436 wait_event(card
->waitq
,
2437 atomic_read(&card
->tx_timeout_task_counter
) == 0);
2439 unregister_netdev(netdev
);
2441 /* switch off card */
2442 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2443 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2444 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2445 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2447 spider_net_undo_pci_setup(card
);
2448 free_netdev(netdev
);
2451 static struct pci_driver spider_net_driver
= {
2452 .name
= spider_net_driver_name
,
2453 .id_table
= spider_net_pci_tbl
,
2454 .probe
= spider_net_probe
,
2455 .remove
= __devexit_p(spider_net_remove
)
2459 * spider_net_init - init function when the driver is loaded
2461 * spider_net_init registers the device driver
2463 static int __init
spider_net_init(void)
2465 printk(KERN_INFO
"Spidernet version %s.\n", VERSION
);
2467 if (rx_descriptors
< SPIDER_NET_RX_DESCRIPTORS_MIN
) {
2468 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MIN
;
2469 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2471 if (rx_descriptors
> SPIDER_NET_RX_DESCRIPTORS_MAX
) {
2472 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MAX
;
2473 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2475 if (tx_descriptors
< SPIDER_NET_TX_DESCRIPTORS_MIN
) {
2476 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MIN
;
2477 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2479 if (tx_descriptors
> SPIDER_NET_TX_DESCRIPTORS_MAX
) {
2480 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MAX
;
2481 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2484 return pci_register_driver(&spider_net_driver
);
2488 * spider_net_cleanup - exit function when driver is unloaded
2490 * spider_net_cleanup unregisters the device driver
2492 static void __exit
spider_net_cleanup(void)
2494 pci_unregister_driver(&spider_net_driver
);
2497 module_init(spider_net_init
);
2498 module_exit(spider_net_cleanup
);