?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'r6040-next'
[linux/fpc-iii.git] / drivers / pci / hotplug / ibmphp_hpc.c
bloba6b458e4ab46178ede364e05608add56368e09a2
1 /*
2 * IBM Hot Plug Controller Driver
3 *
4 * Written By: Jyoti Shah, IBM Corporation
5 *
6 * Copyright (C) 2001-2003 IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <gregkh@us.ibm.com>
26 * <jshah@us.ibm.com>
27 *
28 */
29
30 #include <linux/wait.h>
31 #include <linux/time.h>
32 #include <linux/delay.h>
33 #include <linux/module.h>
34 #include <linux/pci.h>
35 #include <linux/init.h>
36 #include <linux/mutex.h>
37 #include <linux/sched.h>
38 #include <linux/semaphore.h>
39 #include <linux/kthread.h>
40 #include "ibmphp.h"
41
42 static int to_debug = 0;
43 #define debug_polling(fmt, arg...) do { if (to_debug) debug(fmt, arg); } while (0)
44
45 //----------------------------------------------------------------------------
46 // timeout values
47 //----------------------------------------------------------------------------
48 #define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
49 #define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
50 #define HPC_GETACCESS_TIMEOUT 60 // seconds
51 #define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
52 #define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
53
54 //----------------------------------------------------------------------------
55 // Winnipeg Architected Register Offsets
56 //----------------------------------------------------------------------------
57 #define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
58 #define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
59 #define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
60 #define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
61 #define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
62
63 //----------------------------------------------------------------------------
64 // Winnipeg Store Type commands (Add this commands to the register offset)
65 //----------------------------------------------------------------------------
66 #define WPG_I2C_AND 0x1000 // I2C AND operation
67 #define WPG_I2C_OR 0x2000 // I2C OR operation
68
69 //----------------------------------------------------------------------------
70 // Command set for I2C Master Operation Setup Register
71 //----------------------------------------------------------------------------
72 #define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
73 #define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
74 #define WPG_READDIRECT_MASK 0x10010000
75 #define WPG_WRITEDIRECT_MASK 0x60010000
76
77
78 //----------------------------------------------------------------------------
79 // bit masks for I2C Master Control Register
80 //----------------------------------------------------------------------------
81 #define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
82
83 //----------------------------------------------------------------------------
84 //
85 //----------------------------------------------------------------------------
86 #define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
87
88 //----------------------------------------------------------------------------
89 // command index
90 //----------------------------------------------------------------------------
91 #define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
92 #define WPG_CTLR_INDEX 0x0F // index - ctlr
93 #define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
94 #define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
95
96 //----------------------------------------------------------------------------
97 // macro utilities
98 //----------------------------------------------------------------------------
99 // if bits 20,22,25,26,27,29,30 are OFF return 1
100 #define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? 0 : 1))
101
102 //----------------------------------------------------------------------------
103 // global variables
104 //----------------------------------------------------------------------------
105 static struct mutex sem_hpcaccess; // lock access to HPC
106 static struct semaphore semOperations; // lock all operations and
107 // access to data structures
108 static struct semaphore sem_exit; // make sure polling thread goes away
109 static struct task_struct *ibmphp_poll_thread;
110 //----------------------------------------------------------------------------
111 // local function prototypes
112 //----------------------------------------------------------------------------
113 static u8 i2c_ctrl_read(struct controller *, void __iomem *, u8);
114 static u8 i2c_ctrl_write(struct controller *, void __iomem *, u8, u8);
115 static u8 hpc_writecmdtoindex(u8, u8);
116 static u8 hpc_readcmdtoindex(u8, u8);
117 static void get_hpc_access(void);
118 static void free_hpc_access(void);
119 static int poll_hpc(void *data);
120 static int process_changeinstatus(struct slot *, struct slot *);
121 static int process_changeinlatch(u8, u8, struct controller *);
122 static int hpc_wait_ctlr_notworking(int, struct controller *, void __iomem *, u8 *);
123 //----------------------------------------------------------------------------
124
125
126 /*----------------------------------------------------------------------
127 * Name: ibmphp_hpc_initvars
128 *
129 * Action: initialize semaphores and variables
130 *---------------------------------------------------------------------*/
131 void __init ibmphp_hpc_initvars(void)
132 {
133 debug("%s - Entry\n", __func__);
134
135 mutex_init(&sem_hpcaccess);
136 sema_init(&semOperations, 1);
137 sema_init(&sem_exit, 0);
138 to_debug = 0;
139
140 debug("%s - Exit\n", __func__);
141 }
142
143 /*----------------------------------------------------------------------
144 * Name: i2c_ctrl_read
145 *
146 * Action: read from HPC over I2C
147 *
148 *---------------------------------------------------------------------*/
149 static u8 i2c_ctrl_read(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
150 {
151 u8 status;
152 int i;
153 void __iomem *wpg_addr; // base addr + offset
154 unsigned long wpg_data; // data to/from WPG LOHI format
155 unsigned long ultemp;
156 unsigned long data; // actual data HILO format
157
158 debug_polling("%s - Entry WPGBbar[%p] index[%x] \n", __func__, WPGBbar, index);
159
160 //--------------------------------------------------------------------
161 // READ - step 1
162 // read at address, byte length, I2C address (shifted), index
163 // or read direct, byte length, index
164 if (ctlr_ptr->ctlr_type == 0x02) {
165 data = WPG_READATADDR_MASK;
166 // fill in I2C address
167 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
168 ultemp = ultemp >> 1;
169 data |= (ultemp << 8);
170
171 // fill in index
172 data |= (unsigned long)index;
173 } else if (ctlr_ptr->ctlr_type == 0x04) {
174 data = WPG_READDIRECT_MASK;
175
176 // fill in index
177 ultemp = (unsigned long)index;
178 ultemp = ultemp << 8;
179 data |= ultemp;
180 } else {
181 err("this controller type is not supported \n");
182 return HPC_ERROR;
183 }
184
185 wpg_data = swab32(data); // swap data before writing
186 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
187 writel(wpg_data, wpg_addr);
188
189 //--------------------------------------------------------------------
190 // READ - step 2 : clear the message buffer
191 data = 0x00000000;
192 wpg_data = swab32(data);
193 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
194 writel(wpg_data, wpg_addr);
195
196 //--------------------------------------------------------------------
197 // READ - step 3 : issue start operation, I2C master control bit 30:ON
198 // 2020 : [20] OR operation at [20] offset 0x20
199 data = WPG_I2CMCNTL_STARTOP_MASK;
200 wpg_data = swab32(data);
201 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
202 writel(wpg_data, wpg_addr);
203
204 //--------------------------------------------------------------------
205 // READ - step 4 : wait until start operation bit clears
206 i = CMD_COMPLETE_TOUT_SEC;
207 while (i) {
208 msleep(10);
209 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
210 wpg_data = readl(wpg_addr);
211 data = swab32(wpg_data);
212 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
213 break;
214 i--;
215 }
216 if (i == 0) {
217 debug("%s - Error : WPG timeout\n", __func__);
218 return HPC_ERROR;
219 }
220 //--------------------------------------------------------------------
221 // READ - step 5 : read I2C status register
222 i = CMD_COMPLETE_TOUT_SEC;
223 while (i) {
224 msleep(10);
225 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
226 wpg_data = readl(wpg_addr);
227 data = swab32(wpg_data);
228 if (HPC_I2CSTATUS_CHECK(data))
229 break;
230 i--;
231 }
232 if (i == 0) {
233 debug("ctrl_read - Exit Error:I2C timeout\n");
234 return HPC_ERROR;
235 }
236
237 //--------------------------------------------------------------------
238 // READ - step 6 : get DATA
239 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
240 wpg_data = readl(wpg_addr);
241 data = swab32(wpg_data);
242
243 status = (u8) data;
244
245 debug_polling("%s - Exit index[%x] status[%x]\n", __func__, index, status);
246
247 return (status);
248 }
249
250 /*----------------------------------------------------------------------
251 * Name: i2c_ctrl_write
252 *
253 * Action: write to HPC over I2C
254 *
255 * Return 0 or error codes
256 *---------------------------------------------------------------------*/
257 static u8 i2c_ctrl_write(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
258 {
259 u8 rc;
260 void __iomem *wpg_addr; // base addr + offset
261 unsigned long wpg_data; // data to/from WPG LOHI format
262 unsigned long ultemp;
263 unsigned long data; // actual data HILO format
264 int i;
265
266 debug_polling("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __func__, WPGBbar, index, cmd);
267
268 rc = 0;
269 //--------------------------------------------------------------------
270 // WRITE - step 1
271 // write at address, byte length, I2C address (shifted), index
272 // or write direct, byte length, index
273 data = 0x00000000;
274
275 if (ctlr_ptr->ctlr_type == 0x02) {
276 data = WPG_WRITEATADDR_MASK;
277 // fill in I2C address
278 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
279 ultemp = ultemp >> 1;
280 data |= (ultemp << 8);
281
282 // fill in index
283 data |= (unsigned long)index;
284 } else if (ctlr_ptr->ctlr_type == 0x04) {
285 data = WPG_WRITEDIRECT_MASK;
286
287 // fill in index
288 ultemp = (unsigned long)index;
289 ultemp = ultemp << 8;
290 data |= ultemp;
291 } else {
292 err("this controller type is not supported \n");
293 return HPC_ERROR;
294 }
295
296 wpg_data = swab32(data); // swap data before writing
297 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
298 writel(wpg_data, wpg_addr);
299
300 //--------------------------------------------------------------------
301 // WRITE - step 2 : clear the message buffer
302 data = 0x00000000 | (unsigned long)cmd;
303 wpg_data = swab32(data);
304 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
305 writel(wpg_data, wpg_addr);
306
307 //--------------------------------------------------------------------
308 // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
309 // 2020 : [20] OR operation at [20] offset 0x20
310 data = WPG_I2CMCNTL_STARTOP_MASK;
311 wpg_data = swab32(data);
312 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
313 writel(wpg_data, wpg_addr);
314
315 //--------------------------------------------------------------------
316 // WRITE - step 4 : wait until start operation bit clears
317 i = CMD_COMPLETE_TOUT_SEC;
318 while (i) {
319 msleep(10);
320 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
321 wpg_data = readl(wpg_addr);
322 data = swab32(wpg_data);
323 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
324 break;
325 i--;
326 }
327 if (i == 0) {
328 debug("%s - Exit Error:WPG timeout\n", __func__);
329 rc = HPC_ERROR;
330 }
331
332 //--------------------------------------------------------------------
333 // WRITE - step 5 : read I2C status register
334 i = CMD_COMPLETE_TOUT_SEC;
335 while (i) {
336 msleep(10);
337 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
338 wpg_data = readl(wpg_addr);
339 data = swab32(wpg_data);
340 if (HPC_I2CSTATUS_CHECK(data))
341 break;
342 i--;
343 }
344 if (i == 0) {
345 debug("ctrl_read - Error : I2C timeout\n");
346 rc = HPC_ERROR;
347 }
348
349 debug_polling("%s Exit rc[%x]\n", __func__, rc);
350 return (rc);
351 }
352
353 //------------------------------------------------------------
354 // Read from ISA type HPC
355 //------------------------------------------------------------
356 static u8 isa_ctrl_read(struct controller *ctlr_ptr, u8 offset)
357 {
358 u16 start_address;
359 u16 end_address;
360 u8 data;
361
362 start_address = ctlr_ptr->u.isa_ctlr.io_start;
363 end_address = ctlr_ptr->u.isa_ctlr.io_end;
364 data = inb(start_address + offset);
365 return data;
366 }
367
368 //--------------------------------------------------------------
369 // Write to ISA type HPC
370 //--------------------------------------------------------------
371 static void isa_ctrl_write(struct controller *ctlr_ptr, u8 offset, u8 data)
372 {
373 u16 start_address;
374 u16 port_address;
375
376 start_address = ctlr_ptr->u.isa_ctlr.io_start;
377 port_address = start_address + (u16) offset;
378 outb(data, port_address);
379 }
380
381 static u8 pci_ctrl_read(struct controller *ctrl, u8 offset)
382 {
383 u8 data = 0x00;
384 debug("inside pci_ctrl_read\n");
385 if (ctrl->ctrl_dev)
386 pci_read_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
387 return data;
388 }
389
390 static u8 pci_ctrl_write(struct controller *ctrl, u8 offset, u8 data)
391 {
392 u8 rc = -ENODEV;
393 debug("inside pci_ctrl_write\n");
394 if (ctrl->ctrl_dev) {
395 pci_write_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
396 rc = 0;
397 }
398 return rc;
399 }
400
401 static u8 ctrl_read(struct controller *ctlr, void __iomem *base, u8 offset)
402 {
403 u8 rc;
404 switch (ctlr->ctlr_type) {
405 case 0:
406 rc = isa_ctrl_read(ctlr, offset);
407 break;
408 case 1:
409 rc = pci_ctrl_read(ctlr, offset);
410 break;
411 case 2:
412 case 4:
413 rc = i2c_ctrl_read(ctlr, base, offset);
414 break;
415 default:
416 return -ENODEV;
417 }
418 return rc;
419 }
420
421 static u8 ctrl_write(struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
422 {
423 u8 rc = 0;
424 switch (ctlr->ctlr_type) {
425 case 0:
426 isa_ctrl_write(ctlr, offset, data);
427 break;
428 case 1:
429 rc = pci_ctrl_write(ctlr, offset, data);
430 break;
431 case 2:
432 case 4:
433 rc = i2c_ctrl_write(ctlr, base, offset, data);
434 break;
435 default:
436 return -ENODEV;
437 }
438 return rc;
439 }
440 /*----------------------------------------------------------------------
441 * Name: hpc_writecmdtoindex()
442 *
443 * Action: convert a write command to proper index within a controller
444 *
445 * Return index, HPC_ERROR
446 *---------------------------------------------------------------------*/
447 static u8 hpc_writecmdtoindex(u8 cmd, u8 index)
448 {
449 u8 rc;
450
451 switch (cmd) {
452 case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
453 case HPC_CTLR_CLEARIRQ: // 0x06.N.15
454 case HPC_CTLR_RESET: // 0x07.N.15
455 case HPC_CTLR_IRQSTEER: // 0x08.N.15
456 case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
457 case HPC_ALLSLOT_ON: // 0x11.N.15
458 case HPC_ALLSLOT_OFF: // 0x12.N.15
459 rc = 0x0F;
460 break;
461
462 case HPC_SLOT_OFF: // 0x02.Y.0-14
463 case HPC_SLOT_ON: // 0x03.Y.0-14
464 case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
465 case HPC_SLOT_ATTNON: // 0x05.N.0-14
466 case HPC_SLOT_BLINKLED: // 0x13.N.0-14
467 rc = index;
468 break;
469
470 case HPC_BUS_33CONVMODE:
471 case HPC_BUS_66CONVMODE:
472 case HPC_BUS_66PCIXMODE:
473 case HPC_BUS_100PCIXMODE:
474 case HPC_BUS_133PCIXMODE:
475 rc = index + WPG_1ST_BUS_INDEX - 1;
476 break;
477
478 default:
479 err("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
480 rc = HPC_ERROR;
481 }
482
483 return rc;
484 }
485
486 /*----------------------------------------------------------------------
487 * Name: hpc_readcmdtoindex()
488 *
489 * Action: convert a read command to proper index within a controller
490 *
491 * Return index, HPC_ERROR
492 *---------------------------------------------------------------------*/
493 static u8 hpc_readcmdtoindex(u8 cmd, u8 index)
494 {
495 u8 rc;
496
497 switch (cmd) {
498 case READ_CTLRSTATUS:
499 rc = 0x0F;
500 break;
501 case READ_SLOTSTATUS:
502 case READ_ALLSTAT:
503 rc = index;
504 break;
505 case READ_EXTSLOTSTATUS:
506 rc = index + WPG_1ST_EXTSLOT_INDEX;
507 break;
508 case READ_BUSSTATUS:
509 rc = index + WPG_1ST_BUS_INDEX - 1;
510 break;
511 case READ_SLOTLATCHLOWREG:
512 rc = 0x28;
513 break;
514 case READ_REVLEVEL:
515 rc = 0x25;
516 break;
517 case READ_HPCOPTIONS:
518 rc = 0x27;
519 break;
520 default:
521 rc = HPC_ERROR;
522 }
523 return rc;
524 }
525
526 /*----------------------------------------------------------------------
527 * Name: HPCreadslot()
528 *
529 * Action: issue a READ command to HPC
530 *
531 * Input: pslot - cannot be NULL for READ_ALLSTAT
532 * pstatus - can be NULL for READ_ALLSTAT
533 *
534 * Return 0 or error codes
535 *---------------------------------------------------------------------*/
536 int ibmphp_hpc_readslot(struct slot *pslot, u8 cmd, u8 *pstatus)
537 {
538 void __iomem *wpg_bbar = NULL;
539 struct controller *ctlr_ptr;
540 u8 index, status;
541 int rc = 0;
542 int busindex;
543
544 debug_polling("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __func__, pslot, cmd, pstatus);
545
546 if ((pslot == NULL)
547 || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
548 rc = -EINVAL;
549 err("%s - Error invalid pointer, rc[%d]\n", __func__, rc);
550 return rc;
551 }
552
553 if (cmd == READ_BUSSTATUS) {
554 busindex = ibmphp_get_bus_index(pslot->bus);
555 if (busindex < 0) {
556 rc = -EINVAL;
557 err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
558 return rc;
559 } else
560 index = (u8) busindex;
561 } else
562 index = pslot->ctlr_index;
563
564 index = hpc_readcmdtoindex(cmd, index);
565
566 if (index == HPC_ERROR) {
567 rc = -EINVAL;
568 err("%s - Exit Error:invalid index, rc[%d]\n", __func__, rc);
569 return rc;
570 }
571
572 ctlr_ptr = pslot->ctrl;
573
574 get_hpc_access();
575
576 //--------------------------------------------------------------------
577 // map physical address to logical address
578 //--------------------------------------------------------------------
579 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
580 wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
581
582 //--------------------------------------------------------------------
583 // check controller status before reading
584 //--------------------------------------------------------------------
585 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
586 if (!rc) {
587 switch (cmd) {
588 case READ_ALLSTAT:
589 // update the slot structure
590 pslot->ctrl->status = status;
591 pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
592 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
593 &status);
594 if (!rc)
595 pslot->ext_status = ctrl_read(ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
596
597 break;
598
599 case READ_SLOTSTATUS:
600 // DO NOT update the slot structure
601 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
602 break;
603
604 case READ_EXTSLOTSTATUS:
605 // DO NOT update the slot structure
606 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
607 break;
608
609 case READ_CTLRSTATUS:
610 // DO NOT update the slot structure
611 *pstatus = status;
612 break;
613
614 case READ_BUSSTATUS:
615 pslot->busstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
616 break;
617 case READ_REVLEVEL:
618 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
619 break;
620 case READ_HPCOPTIONS:
621 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
622 break;
623 case READ_SLOTLATCHLOWREG:
624 // DO NOT update the slot structure
625 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
626 break;
627
628 // Not used
629 case READ_ALLSLOT:
630 list_for_each_entry(pslot, &ibmphp_slot_head,
631 ibm_slot_list) {
632 index = pslot->ctlr_index;
633 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr,
634 wpg_bbar, &status);
635 if (!rc) {
636 pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
637 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT,
638 ctlr_ptr, wpg_bbar, &status);
639 if (!rc)
640 pslot->ext_status =
641 ctrl_read(ctlr_ptr, wpg_bbar,
642 index + WPG_1ST_EXTSLOT_INDEX);
643 } else {
644 err("%s - Error ctrl_read failed\n", __func__);
645 rc = -EINVAL;
646 break;
647 }
648 }
649 break;
650 default:
651 rc = -EINVAL;
652 break;
653 }
654 }
655 //--------------------------------------------------------------------
656 // cleanup
657 //--------------------------------------------------------------------
658
659 // remove physical to logical address mapping
660 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
661 iounmap(wpg_bbar);
662
663 free_hpc_access();
664
665 debug_polling("%s - Exit rc[%d]\n", __func__, rc);
666 return rc;
667 }
668
669 /*----------------------------------------------------------------------
670 * Name: ibmphp_hpc_writeslot()
671 *
672 * Action: issue a WRITE command to HPC
673 *---------------------------------------------------------------------*/
674 int ibmphp_hpc_writeslot(struct slot *pslot, u8 cmd)
675 {
676 void __iomem *wpg_bbar = NULL;
677 struct controller *ctlr_ptr;
678 u8 index, status;
679 int busindex;
680 u8 done;
681 int rc = 0;
682 int timeout;
683
684 debug_polling("%s - Entry pslot[%p] cmd[%x]\n", __func__, pslot, cmd);
685 if (pslot == NULL) {
686 rc = -EINVAL;
687 err("%s - Error Exit rc[%d]\n", __func__, rc);
688 return rc;
689 }
690
691 if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
692 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
693 (cmd == HPC_BUS_133PCIXMODE)) {
694 busindex = ibmphp_get_bus_index(pslot->bus);
695 if (busindex < 0) {
696 rc = -EINVAL;
697 err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
698 return rc;
699 } else
700 index = (u8) busindex;
701 } else
702 index = pslot->ctlr_index;
703
704 index = hpc_writecmdtoindex(cmd, index);
705
706 if (index == HPC_ERROR) {
707 rc = -EINVAL;
708 err("%s - Error Exit rc[%d]\n", __func__, rc);
709 return rc;
710 }
711
712 ctlr_ptr = pslot->ctrl;
713
714 get_hpc_access();
715
716 //--------------------------------------------------------------------
717 // map physical address to logical address
718 //--------------------------------------------------------------------
719 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
720 wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
721
722 debug("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __func__,
723 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
724 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
725 }
726 //--------------------------------------------------------------------
727 // check controller status before writing
728 //--------------------------------------------------------------------
729 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
730 if (!rc) {
731
732 ctrl_write(ctlr_ptr, wpg_bbar, index, cmd);
733
734 //--------------------------------------------------------------------
735 // check controller is still not working on the command
736 //--------------------------------------------------------------------
737 timeout = CMD_COMPLETE_TOUT_SEC;
738 done = 0;
739 while (!done) {
740 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
741 &status);
742 if (!rc) {
743 if (NEEDTOCHECK_CMDSTATUS(cmd)) {
744 if (CTLR_FINISHED(status) == HPC_CTLR_FINISHED_YES)
745 done = 1;
746 } else
747 done = 1;
748 }
749 if (!done) {
750 msleep(1000);
751 if (timeout < 1) {
752 done = 1;
753 err("%s - Error command complete timeout\n", __func__);
754 rc = -EFAULT;
755 } else
756 timeout--;
757 }
758 }
759 ctlr_ptr->status = status;
760 }
761 // cleanup
762
763 // remove physical to logical address mapping
764 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
765 iounmap(wpg_bbar);
766 free_hpc_access();
767
768 debug_polling("%s - Exit rc[%d]\n", __func__, rc);
769 return rc;
770 }
771
772 /*----------------------------------------------------------------------
773 * Name: get_hpc_access()
774 *
775 * Action: make sure only one process can access HPC at one time
776 *---------------------------------------------------------------------*/
777 static void get_hpc_access(void)
778 {
779 mutex_lock(&sem_hpcaccess);
780 }
781
782 /*----------------------------------------------------------------------
783 * Name: free_hpc_access()
784 *---------------------------------------------------------------------*/
785 void free_hpc_access(void)
786 {
787 mutex_unlock(&sem_hpcaccess);
788 }
789
790 /*----------------------------------------------------------------------
791 * Name: ibmphp_lock_operations()
792 *
793 * Action: make sure only one process can change the data structure
794 *---------------------------------------------------------------------*/
795 void ibmphp_lock_operations(void)
796 {
797 down(&semOperations);
798 to_debug = 1;
799 }
800
801 /*----------------------------------------------------------------------
802 * Name: ibmphp_unlock_operations()
803 *---------------------------------------------------------------------*/
804 void ibmphp_unlock_operations(void)
805 {
806 debug("%s - Entry\n", __func__);
807 up(&semOperations);
808 to_debug = 0;
809 debug("%s - Exit\n", __func__);
810 }
811
812 /*----------------------------------------------------------------------
813 * Name: poll_hpc()
814 *---------------------------------------------------------------------*/
815 #define POLL_LATCH_REGISTER 0
816 #define POLL_SLOTS 1
817 #define POLL_SLEEP 2
818 static int poll_hpc(void *data)
819 {
820 struct slot myslot;
821 struct slot *pslot = NULL;
822 int rc;
823 int poll_state = POLL_LATCH_REGISTER;
824 u8 oldlatchlow = 0x00;
825 u8 curlatchlow = 0x00;
826 int poll_count = 0;
827 u8 ctrl_count = 0x00;
828
829 debug("%s - Entry\n", __func__);
830
831 while (!kthread_should_stop()) {
832 /* try to get the lock to do some kind of hardware access */
833 down(&semOperations);
834
835 switch (poll_state) {
836 case POLL_LATCH_REGISTER:
837 oldlatchlow = curlatchlow;
838 ctrl_count = 0x00;
839 list_for_each_entry(pslot, &ibmphp_slot_head,
840 ibm_slot_list) {
841 if (ctrl_count >= ibmphp_get_total_controllers())
842 break;
843 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
844 ctrl_count++;
845 if (READ_SLOT_LATCH(pslot->ctrl)) {
846 rc = ibmphp_hpc_readslot(pslot,
847 READ_SLOTLATCHLOWREG,
848 &curlatchlow);
849 if (oldlatchlow != curlatchlow)
850 process_changeinlatch(oldlatchlow,
851 curlatchlow,
852 pslot->ctrl);
853 }
854 }
855 }
856 ++poll_count;
857 poll_state = POLL_SLEEP;
858 break;
859 case POLL_SLOTS:
860 list_for_each_entry(pslot, &ibmphp_slot_head,
861 ibm_slot_list) {
862 // make a copy of the old status
863 memcpy((void *) &myslot, (void *) pslot,
864 sizeof(struct slot));
865 rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
866 if ((myslot.status != pslot->status)
867 || (myslot.ext_status != pslot->ext_status))
868 process_changeinstatus(pslot, &myslot);
869 }
870 ctrl_count = 0x00;
871 list_for_each_entry(pslot, &ibmphp_slot_head,
872 ibm_slot_list) {
873 if (ctrl_count >= ibmphp_get_total_controllers())
874 break;
875 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
876 ctrl_count++;
877 if (READ_SLOT_LATCH(pslot->ctrl))
878 rc = ibmphp_hpc_readslot(pslot,
879 READ_SLOTLATCHLOWREG,
880 &curlatchlow);
881 }
882 }
883 ++poll_count;
884 poll_state = POLL_SLEEP;
885 break;
886 case POLL_SLEEP:
887 /* don't sleep with a lock on the hardware */
888 up(&semOperations);
889 msleep(POLL_INTERVAL_SEC * 1000);
890
891 if (kthread_should_stop())
892 goto out_sleep;
893
894 down(&semOperations);
895
896 if (poll_count >= POLL_LATCH_CNT) {
897 poll_count = 0;
898 poll_state = POLL_SLOTS;
899 } else
900 poll_state = POLL_LATCH_REGISTER;
901 break;
902 }
903 /* give up the hardware semaphore */
904 up(&semOperations);
905 /* sleep for a short time just for good measure */
906 out_sleep:
907 msleep(100);
908 }
909 up(&sem_exit);
910 debug("%s - Exit\n", __func__);
911 return 0;
912 }
913
914
915 /*----------------------------------------------------------------------
916 * Name: process_changeinstatus
917 *
918 * Action: compare old and new slot status, process the change in status
919 *
920 * Input: pointer to slot struct, old slot struct
921 *
922 * Return 0 or error codes
923 * Value:
924 *
925 * Side
926 * Effects: None.
927 *
928 * Notes:
929 *---------------------------------------------------------------------*/
930 static int process_changeinstatus(struct slot *pslot, struct slot *poldslot)
931 {
932 u8 status;
933 int rc = 0;
934 u8 disable = 0;
935 u8 update = 0;
936
937 debug("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
938
939 // bit 0 - HPC_SLOT_POWER
940 if ((pslot->status & 0x01) != (poldslot->status & 0x01))
941 update = 1;
942
943 // bit 1 - HPC_SLOT_CONNECT
944 // ignore
945
946 // bit 2 - HPC_SLOT_ATTN
947 if ((pslot->status & 0x04) != (poldslot->status & 0x04))
948 update = 1;
949
950 // bit 3 - HPC_SLOT_PRSNT2
951 // bit 4 - HPC_SLOT_PRSNT1
952 if (((pslot->status & 0x08) != (poldslot->status & 0x08))
953 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
954 update = 1;
955
956 // bit 5 - HPC_SLOT_PWRGD
957 if ((pslot->status & 0x20) != (poldslot->status & 0x20))
958 // OFF -> ON: ignore, ON -> OFF: disable slot
959 if ((poldslot->status & 0x20) && (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status)))
960 disable = 1;
961
962 // bit 6 - HPC_SLOT_BUS_SPEED
963 // ignore
964
965 // bit 7 - HPC_SLOT_LATCH
966 if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
967 update = 1;
968 // OPEN -> CLOSE
969 if (pslot->status & 0x80) {
970 if (SLOT_PWRGD(pslot->status)) {
971 // power goes on and off after closing latch
972 // check again to make sure power is still ON
973 msleep(1000);
974 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, &status);
975 if (SLOT_PWRGD(status))
976 update = 1;
977 else // overwrite power in pslot to OFF
978 pslot->status &= ~HPC_SLOT_POWER;
979 }
980 }
981 // CLOSE -> OPEN
982 else if ((SLOT_PWRGD(poldslot->status) == HPC_SLOT_PWRGD_GOOD)
983 && (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status))) {
984 disable = 1;
985 }
986 // else - ignore
987 }
988 // bit 4 - HPC_SLOT_BLINK_ATTN
989 if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
990 update = 1;
991
992 if (disable) {
993 debug("process_changeinstatus - disable slot\n");
994 pslot->flag = 0;
995 rc = ibmphp_do_disable_slot(pslot);
996 }
997
998 if (update || disable)
999 ibmphp_update_slot_info(pslot);
1000
1001 debug("%s - Exit rc[%d] disable[%x] update[%x]\n", __func__, rc, disable, update);
1002
1003 return rc;
1004 }
1005
1006 /*----------------------------------------------------------------------
1007 * Name: process_changeinlatch
1008 *
1009 * Action: compare old and new latch reg status, process the change
1010 *
1011 * Input: old and current latch register status
1012 *
1013 * Return 0 or error codes
1014 * Value:
1015 *---------------------------------------------------------------------*/
1016 static int process_changeinlatch(u8 old, u8 new, struct controller *ctrl)
1017 {
1018 struct slot myslot, *pslot;
1019 u8 i;
1020 u8 mask;
1021 int rc = 0;
1022
1023 debug("%s - Entry old[%x], new[%x]\n", __func__, old, new);
1024 // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1025
1026 for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1027 mask = 0x01 << i;
1028 if ((mask & old) != (mask & new)) {
1029 pslot = ibmphp_get_slot_from_physical_num(i);
1030 if (pslot) {
1031 memcpy((void *) &myslot, (void *) pslot, sizeof(struct slot));
1032 rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
1033 debug("%s - call process_changeinstatus for slot[%d]\n", __func__, i);
1034 process_changeinstatus(pslot, &myslot);
1035 } else {
1036 rc = -EINVAL;
1037 err("%s - Error bad pointer for slot[%d]\n", __func__, i);
1038 }
1039 }
1040 }
1041 debug("%s - Exit rc[%d]\n", __func__, rc);
1042 return rc;
1043 }
1044
1045 /*----------------------------------------------------------------------
1046 * Name: ibmphp_hpc_start_poll_thread
1047 *
1048 * Action: start polling thread
1049 *---------------------------------------------------------------------*/
1050 int __init ibmphp_hpc_start_poll_thread(void)
1051 {
1052 debug("%s - Entry\n", __func__);
1053
1054 ibmphp_poll_thread = kthread_run(poll_hpc, NULL, "hpc_poll");
1055 if (IS_ERR(ibmphp_poll_thread)) {
1056 err("%s - Error, thread not started\n", __func__);
1057 return PTR_ERR(ibmphp_poll_thread);
1058 }
1059 return 0;
1060 }
1061
1062 /*----------------------------------------------------------------------
1063 * Name: ibmphp_hpc_stop_poll_thread
1064 *
1065 * Action: stop polling thread and cleanup
1066 *---------------------------------------------------------------------*/
1067 void __exit ibmphp_hpc_stop_poll_thread(void)
1068 {
1069 debug("%s - Entry\n", __func__);
1070
1071 kthread_stop(ibmphp_poll_thread);
1072 debug("before locking operations\n");
1073 ibmphp_lock_operations();
1074 debug("after locking operations\n");
1075
1076 // wait for poll thread to exit
1077 debug("before sem_exit down\n");
1078 down(&sem_exit);
1079 debug("after sem_exit down\n");
1080
1081 // cleanup
1082 debug("before free_hpc_access\n");
1083 free_hpc_access();
1084 debug("after free_hpc_access\n");
1085 ibmphp_unlock_operations();
1086 debug("after unlock operations\n");
1087 up(&sem_exit);
1088 debug("after sem exit up\n");
1089
1090 debug("%s - Exit\n", __func__);
1091 }
1092
1093 /*----------------------------------------------------------------------
1094 * Name: hpc_wait_ctlr_notworking
1095 *
1096 * Action: wait until the controller is in a not working state
1097 *
1098 * Return 0, HPC_ERROR
1099 * Value:
1100 *---------------------------------------------------------------------*/
1101 static int hpc_wait_ctlr_notworking(int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1102 u8 *pstatus)
1103 {
1104 int rc = 0;
1105 u8 done = 0;
1106
1107 debug_polling("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1108
1109 while (!done) {
1110 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1111 if (*pstatus == HPC_ERROR) {
1112 rc = HPC_ERROR;
1113 done = 1;
1114 }
1115 if (CTLR_WORKING(*pstatus) == HPC_CTLR_WORKING_NO)
1116 done = 1;
1117 if (!done) {
1118 msleep(1000);
1119 if (timeout < 1) {
1120 done = 1;
1121 err("HPCreadslot - Error ctlr timeout\n");
1122 rc = HPC_ERROR;
1123 } else
1124 timeout--;
1125 }
1126 }
1127 debug_polling("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1128 return rc;
1129 }
Linux with added FPC-III support