2 * tape device discipline for 3590 tapes.
4 * Copyright IBM Corp. 2001, 2009
5 * Author(s): Stefan Bader <shbader@de.ibm.com>
6 * Michael Holzheu <holzheu@de.ibm.com>
7 * Martin Schwidefsky <schwidefsky@de.ibm.com>
10 #define KMSG_COMPONENT "tape_3590"
11 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
13 #include <linux/module.h>
14 #include <linux/slab.h>
15 #include <linux/init.h>
16 #include <linux/bio.h>
17 #include <asm/ebcdic.h>
19 #define TAPE_DBF_AREA tape_3590_dbf
20 #define BUFSIZE 512 /* size of buffers for dynamic generated messages */
24 #include "tape_3590.h"
26 static struct workqueue_struct
*tape_3590_wq
;
29 * Pointer to debug area.
31 debug_info_t
*TAPE_DBF_AREA
= NULL
;
32 EXPORT_SYMBOL(TAPE_DBF_AREA
);
34 /*******************************************************************
35 * Error Recovery functions:
36 * - Read Opposite: implemented
37 * - Read Device (buffered) log: BRA
38 * - Read Library log: BRA
40 * - Long Busy: implemented
41 * - Special Intercept: BRA
42 * - Read Alternate: implemented
43 *******************************************************************/
45 static const char *tape_3590_msg
[TAPE_3590_MAX_MSG
] = {
47 [0x10] = "Lost Sense",
48 [0x11] = "Assigned Elsewhere",
49 [0x12] = "Allegiance Reset",
50 [0x13] = "Shared Access Violation",
51 [0x20] = "Command Reject",
52 [0x21] = "Configuration Error",
53 [0x22] = "Protection Exception",
54 [0x23] = "Write Protect",
55 [0x24] = "Write Length",
56 [0x25] = "Read-Only Format",
57 [0x31] = "Beginning of Partition",
58 [0x33] = "End of Partition",
59 [0x34] = "End of Data",
60 [0x35] = "Block not found",
61 [0x40] = "Device Intervention",
62 [0x41] = "Loader Intervention",
63 [0x42] = "Library Intervention",
64 [0x50] = "Write Error",
65 [0x51] = "Erase Error",
66 [0x52] = "Formatting Error",
67 [0x53] = "Read Error",
68 [0x54] = "Unsupported Format",
69 [0x55] = "No Formatting",
70 [0x56] = "Positioning lost",
71 [0x57] = "Read Length",
72 [0x60] = "Unsupported Medium",
73 [0x61] = "Medium Length Error",
74 [0x62] = "Medium removed",
75 [0x64] = "Load Check",
76 [0x65] = "Unload Check",
77 [0x70] = "Equipment Check",
78 [0x71] = "Bus out Check",
79 [0x72] = "Protocol Error",
80 [0x73] = "Interface Error",
82 [0x75] = "Halt Signal",
83 [0x90] = "Device fenced",
84 [0x91] = "Device Path fenced",
85 [0xa0] = "Volume misplaced",
86 [0xa1] = "Volume inaccessible",
87 [0xa2] = "Volume in input",
88 [0xa3] = "Volume ejected",
89 [0xa4] = "All categories reserved",
90 [0xa5] = "Duplicate Volume",
91 [0xa6] = "Library Manager Offline",
92 [0xa7] = "Library Output Station full",
93 [0xa8] = "Vision System non-operational",
94 [0xa9] = "Library Manager Equipment Check",
95 [0xaa] = "Library Equipment Check",
96 [0xab] = "All Library Cells full",
97 [0xac] = "No Cleaner Volumes in Library",
98 [0xad] = "I/O Station door open",
99 [0xae] = "Subsystem environmental alert",
102 static int crypt_supported(struct tape_device
*device
)
104 return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device
));
107 static int crypt_enabled(struct tape_device
*device
)
109 return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device
));
112 static void ext_to_int_kekl(struct tape390_kekl
*in
,
113 struct tape3592_kekl
*out
)
117 memset(out
, 0, sizeof(*out
));
118 if (in
->type
== TAPE390_KEKL_TYPE_HASH
)
120 if (in
->type_on_tape
== TAPE390_KEKL_TYPE_HASH
)
122 strncpy(out
->label
, in
->label
, 64);
123 for (i
= strlen(in
->label
); i
< sizeof(out
->label
); i
++)
125 ASCEBC(out
->label
, sizeof(out
->label
));
128 static void int_to_ext_kekl(struct tape3592_kekl
*in
,
129 struct tape390_kekl
*out
)
131 memset(out
, 0, sizeof(*out
));
133 out
->type
= TAPE390_KEKL_TYPE_HASH
;
135 out
->type
= TAPE390_KEKL_TYPE_LABEL
;
137 out
->type_on_tape
= TAPE390_KEKL_TYPE_HASH
;
139 out
->type_on_tape
= TAPE390_KEKL_TYPE_LABEL
;
140 memcpy(out
->label
, in
->label
, sizeof(in
->label
));
141 EBCASC(out
->label
, sizeof(in
->label
));
145 static void int_to_ext_kekl_pair(struct tape3592_kekl_pair
*in
,
146 struct tape390_kekl_pair
*out
)
148 if (in
->count
== 0) {
149 out
->kekl
[0].type
= TAPE390_KEKL_TYPE_NONE
;
150 out
->kekl
[0].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
151 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
152 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
153 } else if (in
->count
== 1) {
154 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
155 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
156 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
157 } else if (in
->count
== 2) {
158 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
159 int_to_ext_kekl(&in
->kekl
[1], &out
->kekl
[1]);
161 printk("Invalid KEKL number: %d\n", in
->count
);
166 static int check_ext_kekl(struct tape390_kekl
*kekl
)
168 if (kekl
->type
== TAPE390_KEKL_TYPE_NONE
)
170 if (kekl
->type
> TAPE390_KEKL_TYPE_HASH
)
172 if (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_NONE
)
174 if (kekl
->type_on_tape
> TAPE390_KEKL_TYPE_HASH
)
176 if ((kekl
->type
== TAPE390_KEKL_TYPE_HASH
) &&
177 (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_LABEL
))
185 static int check_ext_kekl_pair(struct tape390_kekl_pair
*kekls
)
187 if (check_ext_kekl(&kekls
->kekl
[0]))
189 if (check_ext_kekl(&kekls
->kekl
[1]))
200 static int tape_3592_kekl_query(struct tape_device
*device
,
201 struct tape390_kekl_pair
*ext_kekls
)
203 struct tape_request
*request
;
204 struct tape3592_kekl_query_order
*order
;
205 struct tape3592_kekl_query_data
*int_kekls
;
208 DBF_EVENT(6, "tape3592_kekl_query\n");
209 int_kekls
= kmalloc(sizeof(*int_kekls
), GFP_KERNEL
|GFP_DMA
);
212 request
= tape_alloc_request(2, sizeof(*order
));
213 if (IS_ERR(request
)) {
214 rc
= PTR_ERR(request
);
217 order
= request
->cpdata
;
218 memset(order
,0,sizeof(*order
));
220 order
->max_count
= 2;
221 request
->op
= TO_KEKL_QUERY
;
222 tape_ccw_cc(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
223 tape_ccw_end(request
->cpaddr
+ 1, READ_SS_DATA
, sizeof(*int_kekls
),
225 rc
= tape_do_io(device
, request
);
228 int_to_ext_kekl_pair(&int_kekls
->kekls
, ext_kekls
);
232 tape_free_request(request
);
241 static int tape_3592_ioctl_kekl_query(struct tape_device
*device
,
245 struct tape390_kekl_pair
*ext_kekls
;
247 DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
248 if (!crypt_supported(device
))
250 if (!crypt_enabled(device
))
252 ext_kekls
= kmalloc(sizeof(*ext_kekls
), GFP_KERNEL
);
255 rc
= tape_3592_kekl_query(device
, ext_kekls
);
258 if (copy_to_user((char __user
*) arg
, ext_kekls
, sizeof(*ext_kekls
))) {
268 static int tape_3590_mttell(struct tape_device
*device
, int mt_count
);
273 static int tape_3592_kekl_set(struct tape_device
*device
,
274 struct tape390_kekl_pair
*ext_kekls
)
276 struct tape_request
*request
;
277 struct tape3592_kekl_set_order
*order
;
279 DBF_EVENT(6, "tape3592_kekl_set\n");
280 if (check_ext_kekl_pair(ext_kekls
)) {
281 DBF_EVENT(6, "invalid kekls\n");
284 if (tape_3590_mttell(device
, 0) != 0)
286 request
= tape_alloc_request(1, sizeof(*order
));
288 return PTR_ERR(request
);
289 order
= request
->cpdata
;
290 memset(order
, 0, sizeof(*order
));
292 order
->kekls
.count
= 2;
293 ext_to_int_kekl(&ext_kekls
->kekl
[0], &order
->kekls
.kekl
[0]);
294 ext_to_int_kekl(&ext_kekls
->kekl
[1], &order
->kekls
.kekl
[1]);
295 request
->op
= TO_KEKL_SET
;
296 tape_ccw_end(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
298 return tape_do_io_free(device
, request
);
304 static int tape_3592_ioctl_kekl_set(struct tape_device
*device
,
308 struct tape390_kekl_pair
*ext_kekls
;
310 DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
311 if (!crypt_supported(device
))
313 if (!crypt_enabled(device
))
315 ext_kekls
= kmalloc(sizeof(*ext_kekls
), GFP_KERNEL
);
318 if (copy_from_user(ext_kekls
, (char __user
*)arg
, sizeof(*ext_kekls
))) {
322 rc
= tape_3592_kekl_set(device
, ext_kekls
);
331 static struct tape_request
*__tape_3592_enable_crypt(struct tape_device
*device
)
333 struct tape_request
*request
;
336 DBF_EVENT(6, "tape_3592_enable_crypt\n");
337 if (!crypt_supported(device
))
338 return ERR_PTR(-ENOSYS
);
339 request
= tape_alloc_request(2, 72);
342 data
= request
->cpdata
;
350 data
[36 + 14] = 0x2f;
351 data
[36 + 18] = 0xc3;
352 data
[36 + 35] = 0x72;
353 request
->op
= TO_CRYPT_ON
;
354 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
355 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
359 static int tape_3592_enable_crypt(struct tape_device
*device
)
361 struct tape_request
*request
;
363 request
= __tape_3592_enable_crypt(device
);
365 return PTR_ERR(request
);
366 return tape_do_io_free(device
, request
);
369 static void tape_3592_enable_crypt_async(struct tape_device
*device
)
371 struct tape_request
*request
;
373 request
= __tape_3592_enable_crypt(device
);
374 if (!IS_ERR(request
))
375 tape_do_io_async_free(device
, request
);
381 static struct tape_request
*__tape_3592_disable_crypt(struct tape_device
*device
)
383 struct tape_request
*request
;
386 DBF_EVENT(6, "tape_3592_disable_crypt\n");
387 if (!crypt_supported(device
))
388 return ERR_PTR(-ENOSYS
);
389 request
= tape_alloc_request(2, 72);
392 data
= request
->cpdata
;
398 data
[36 + 35] = 0x32;
400 request
->op
= TO_CRYPT_OFF
;
401 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
402 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
407 static int tape_3592_disable_crypt(struct tape_device
*device
)
409 struct tape_request
*request
;
411 request
= __tape_3592_disable_crypt(device
);
413 return PTR_ERR(request
);
414 return tape_do_io_free(device
, request
);
417 static void tape_3592_disable_crypt_async(struct tape_device
*device
)
419 struct tape_request
*request
;
421 request
= __tape_3592_disable_crypt(device
);
422 if (!IS_ERR(request
))
423 tape_do_io_async_free(device
, request
);
427 * IOCTL: Set encryption status
429 static int tape_3592_ioctl_crypt_set(struct tape_device
*device
,
432 struct tape390_crypt_info info
;
434 DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
435 if (!crypt_supported(device
))
437 if (copy_from_user(&info
, (char __user
*)arg
, sizeof(info
)))
439 if (info
.status
& ~TAPE390_CRYPT_ON_MASK
)
441 if (info
.status
& TAPE390_CRYPT_ON_MASK
)
442 return tape_3592_enable_crypt(device
);
444 return tape_3592_disable_crypt(device
);
447 static int tape_3590_sense_medium(struct tape_device
*device
);
450 * IOCTL: Query enryption status
452 static int tape_3592_ioctl_crypt_query(struct tape_device
*device
,
455 DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
456 if (!crypt_supported(device
))
458 tape_3590_sense_medium(device
);
459 if (copy_to_user((char __user
*) arg
, &TAPE_3590_CRYPT_INFO(device
),
460 sizeof(TAPE_3590_CRYPT_INFO(device
))))
467 * 3590 IOCTL Overload
470 tape_3590_ioctl(struct tape_device
*device
, unsigned int cmd
, unsigned long arg
)
473 case TAPE390_DISPLAY
: {
474 struct display_struct disp
;
476 if (copy_from_user(&disp
, (char __user
*) arg
, sizeof(disp
)))
479 return tape_std_display(device
, &disp
);
481 case TAPE390_KEKL_SET
:
482 return tape_3592_ioctl_kekl_set(device
, arg
);
483 case TAPE390_KEKL_QUERY
:
484 return tape_3592_ioctl_kekl_query(device
, arg
);
485 case TAPE390_CRYPT_SET
:
486 return tape_3592_ioctl_crypt_set(device
, arg
);
487 case TAPE390_CRYPT_QUERY
:
488 return tape_3592_ioctl_crypt_query(device
, arg
);
490 return -EINVAL
; /* no additional ioctls */
495 * SENSE Medium: Get Sense data about medium state
497 static int tape_3590_sense_medium(struct tape_device
*device
)
499 struct tape_request
*request
;
501 request
= tape_alloc_request(1, 128);
503 return PTR_ERR(request
);
504 request
->op
= TO_MSEN
;
505 tape_ccw_end(request
->cpaddr
, MEDIUM_SENSE
, 128, request
->cpdata
);
506 return tape_do_io_free(device
, request
);
509 static void tape_3590_sense_medium_async(struct tape_device
*device
)
511 struct tape_request
*request
;
513 request
= tape_alloc_request(1, 128);
516 request
->op
= TO_MSEN
;
517 tape_ccw_end(request
->cpaddr
, MEDIUM_SENSE
, 128, request
->cpdata
);
518 tape_do_io_async_free(device
, request
);
522 * MTTELL: Tell block. Return the number of block relative to current file.
525 tape_3590_mttell(struct tape_device
*device
, int mt_count
)
530 rc
= tape_std_read_block_id(device
, &block_id
);
533 return block_id
>> 32;
537 * MTSEEK: seek to the specified block.
540 tape_3590_mtseek(struct tape_device
*device
, int count
)
542 struct tape_request
*request
;
544 DBF_EVENT(6, "xsee id: %x\n", count
);
545 request
= tape_alloc_request(3, 4);
547 return PTR_ERR(request
);
548 request
->op
= TO_LBL
;
549 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
550 *(__u32
*) request
->cpdata
= count
;
551 tape_ccw_cc(request
->cpaddr
+ 1, LOCATE
, 4, request
->cpdata
);
552 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
553 return tape_do_io_free(device
, request
);
557 * Read Opposite Error Recovery Function:
558 * Used, when Read Forward does not work
561 tape_3590_read_opposite(struct tape_device
*device
,
562 struct tape_request
*request
)
564 struct tape_3590_disc_data
*data
;
567 * We have allocated 4 ccws in tape_std_read, so we can now
568 * transform the request to a read backward, followed by a
569 * forward space block.
571 request
->op
= TO_RBA
;
572 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
573 data
= device
->discdata
;
574 tape_ccw_cc_idal(request
->cpaddr
+ 1, data
->read_back_op
,
575 device
->char_data
.idal_buf
);
576 tape_ccw_cc(request
->cpaddr
+ 2, FORSPACEBLOCK
, 0, NULL
);
577 tape_ccw_end(request
->cpaddr
+ 3, NOP
, 0, NULL
);
578 DBF_EVENT(6, "xrop ccwg\n");
583 * This should be done after an interrupt with attention bit (0x80)
586 * After a "read attention message" request there are two possible
589 * 1. A unit check is presented, when attention sense is present (e.g. when
590 * a medium has been unloaded). The attention sense comes then
591 * together with the unit check. The recovery action is either "retry"
592 * (in case there is an attention message pending) or "permanent error".
594 * 2. The attention msg is written to the "read subsystem data" buffer.
595 * In this case we probably should print it to the console.
597 static void tape_3590_read_attmsg_async(struct tape_device
*device
)
599 struct tape_request
*request
;
602 request
= tape_alloc_request(3, 4096);
605 request
->op
= TO_READ_ATTMSG
;
606 buf
= request
->cpdata
;
607 buf
[0] = PREP_RD_SS_DATA
;
608 buf
[6] = RD_ATTMSG
; /* read att msg */
609 tape_ccw_cc(request
->cpaddr
, PERFORM_SS_FUNC
, 12, buf
);
610 tape_ccw_cc(request
->cpaddr
+ 1, READ_SS_DATA
, 4096 - 12, buf
+ 12);
611 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
612 tape_do_io_async_free(device
, request
);
616 * These functions are used to schedule follow-up actions from within an
617 * interrupt context (like unsolicited interrupts).
618 * Note: the work handler is called by the system work queue. The tape
619 * commands started by the handler need to be asynchrounous, otherwise
620 * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
622 struct work_handler_data
{
623 struct tape_device
*device
;
625 struct work_struct work
;
629 tape_3590_work_handler(struct work_struct
*work
)
631 struct work_handler_data
*p
=
632 container_of(work
, struct work_handler_data
, work
);
636 tape_3590_sense_medium_async(p
->device
);
639 tape_3590_read_attmsg_async(p
->device
);
642 tape_3592_enable_crypt_async(p
->device
);
645 tape_3592_disable_crypt_async(p
->device
);
648 DBF_EVENT(3, "T3590: work handler undefined for "
649 "operation 0x%02x\n", p
->op
);
651 tape_put_device(p
->device
);
656 tape_3590_schedule_work(struct tape_device
*device
, enum tape_op op
)
658 struct work_handler_data
*p
;
660 if ((p
= kzalloc(sizeof(*p
), GFP_ATOMIC
)) == NULL
)
663 INIT_WORK(&p
->work
, tape_3590_work_handler
);
665 p
->device
= tape_get_device(device
);
668 queue_work(tape_3590_wq
, &p
->work
);
672 static void tape_3590_med_state_set(struct tape_device
*device
,
673 struct tape_3590_med_sense
*sense
)
675 struct tape390_crypt_info
*c_info
;
677 c_info
= &TAPE_3590_CRYPT_INFO(device
);
679 DBF_EVENT(6, "medium state: %x:%x\n", sense
->macst
, sense
->masst
);
680 switch (sense
->macst
) {
684 tape_med_state_set(device
, MS_UNLOADED
);
685 TAPE_3590_CRYPT_INFO(device
).medium_status
= 0;
689 tape_med_state_set(device
, MS_LOADED
);
692 tape_med_state_set(device
, MS_UNKNOWN
);
695 c_info
->medium_status
|= TAPE390_MEDIUM_LOADED_MASK
;
696 if (sense
->flags
& MSENSE_CRYPT_MASK
) {
697 DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense
->flags
);
698 c_info
->medium_status
|= TAPE390_MEDIUM_ENCRYPTED_MASK
;
700 DBF_EVENT(6, "Medium is not encrypted %04x\n", sense
->flags
);
701 c_info
->medium_status
&= ~TAPE390_MEDIUM_ENCRYPTED_MASK
;
706 * The done handler is called at device/channel end and wakes up the sleeping
710 tape_3590_done(struct tape_device
*device
, struct tape_request
*request
)
713 DBF_EVENT(6, "%s done\n", tape_op_verbose
[request
->op
]);
715 switch (request
->op
) {
729 tape_med_state_set(device
, MS_LOADED
);
732 tape_med_state_set(device
, MS_UNLOADED
);
733 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
736 tape_3590_med_state_set(device
, request
->cpdata
);
739 TAPE_3590_CRYPT_INFO(device
).status
740 |= TAPE390_CRYPT_ON_MASK
;
741 *(device
->modeset_byte
) |= 0x03;
744 TAPE_3590_CRYPT_INFO(device
).status
745 &= ~TAPE390_CRYPT_ON_MASK
;
746 *(device
->modeset_byte
) &= ~0x03;
748 case TO_RBI
: /* RBI seems to succeed even without medium loaded. */
749 case TO_NOP
: /* Same to NOP. */
761 return TAPE_IO_SUCCESS
;
765 * This function is called, when error recovery was successful
768 tape_3590_erp_succeded(struct tape_device
*device
, struct tape_request
*request
)
770 DBF_EVENT(3, "Error Recovery successful for %s\n",
771 tape_op_verbose
[request
->op
]);
772 return tape_3590_done(device
, request
);
776 * This function is called, when error recovery was not successful
779 tape_3590_erp_failed(struct tape_device
*device
, struct tape_request
*request
,
780 struct irb
*irb
, int rc
)
782 DBF_EVENT(3, "Error Recovery failed for %s\n",
783 tape_op_verbose
[request
->op
]);
784 tape_dump_sense_dbf(device
, request
, irb
);
789 * Error Recovery do retry
792 tape_3590_erp_retry(struct tape_device
*device
, struct tape_request
*request
,
795 DBF_EVENT(2, "Retry: %s\n", tape_op_verbose
[request
->op
]);
796 tape_dump_sense_dbf(device
, request
, irb
);
797 return TAPE_IO_RETRY
;
801 * Handle unsolicited interrupts
804 tape_3590_unsolicited_irq(struct tape_device
*device
, struct irb
*irb
)
806 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_CHN_END
)
807 /* Probably result of halt ssch */
808 return TAPE_IO_PENDING
;
809 else if (irb
->scsw
.cmd
.dstat
== 0x85)
811 DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device
->cdev_id
);
812 else if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
813 tape_3590_schedule_work(device
, TO_READ_ATTMSG
);
815 DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device
->cdev_id
);
816 tape_dump_sense_dbf(device
, NULL
, irb
);
818 /* check medium state */
819 tape_3590_schedule_work(device
, TO_MSEN
);
820 return TAPE_IO_SUCCESS
;
824 * Basic Recovery routine
827 tape_3590_erp_basic(struct tape_device
*device
, struct tape_request
*request
,
828 struct irb
*irb
, int rc
)
830 struct tape_3590_sense
*sense
;
832 sense
= (struct tape_3590_sense
*) irb
->ecw
;
834 switch (sense
->bra
) {
836 return tape_3590_erp_failed(device
, request
, irb
, rc
);
838 return tape_3590_erp_succeded(device
, request
);
840 return tape_3590_erp_retry(device
, request
, irb
);
842 return tape_3590_erp_failed(device
, request
, irb
, rc
);
850 * RDL: Read Device (buffered) log
853 tape_3590_erp_read_buf_log(struct tape_device
*device
,
854 struct tape_request
*request
, struct irb
*irb
)
857 * We just do the basic error recovery at the moment (retry).
858 * Perhaps in the future, we read the log and dump it somewhere...
860 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
867 tape_3590_erp_swap(struct tape_device
*device
, struct tape_request
*request
,
871 * This error recovery should swap the tapes
872 * if the original has a problem. The operation
873 * should proceed with the new tape... this
874 * should probably be done in user space!
876 dev_warn (&device
->cdev
->dev
, "The tape medium must be loaded into a "
877 "different tape unit\n");
878 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
885 tape_3590_erp_long_busy(struct tape_device
*device
,
886 struct tape_request
*request
, struct irb
*irb
)
888 DBF_EVENT(6, "Device is busy\n");
889 return TAPE_IO_LONG_BUSY
;
893 * SPI: Special Intercept
896 tape_3590_erp_special_interrupt(struct tape_device
*device
,
897 struct tape_request
*request
, struct irb
*irb
)
899 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
903 * RDA: Read Alternate
906 tape_3590_erp_read_alternate(struct tape_device
*device
,
907 struct tape_request
*request
, struct irb
*irb
)
909 struct tape_3590_disc_data
*data
;
912 * The issued Read Backward or Read Previous command is not
913 * supported by the device
914 * The recovery action should be to issue another command:
915 * Read Revious: if Read Backward is not supported
916 * Read Backward: if Read Previous is not supported
918 data
= device
->discdata
;
919 if (data
->read_back_op
== READ_PREVIOUS
) {
920 DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n",
922 data
->read_back_op
= READ_BACKWARD
;
924 DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n",
926 data
->read_back_op
= READ_PREVIOUS
;
928 tape_3590_read_opposite(device
, request
);
929 return tape_3590_erp_retry(device
, request
, irb
);
933 * Error Recovery read opposite
936 tape_3590_erp_read_opposite(struct tape_device
*device
,
937 struct tape_request
*request
, struct irb
*irb
)
939 switch (request
->op
) {
942 * We did read forward, but the data could not be read.
943 * We will read backward and then skip forward again.
945 tape_3590_read_opposite(device
, request
);
946 return tape_3590_erp_retry(device
, request
, irb
);
948 /* We tried to read forward and backward, but hat no success */
949 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
952 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
957 * Print an MIM (Media Information Message) (message code f0)
960 tape_3590_print_mim_msg_f0(struct tape_device
*device
, struct irb
*irb
)
962 struct tape_3590_sense
*sense
;
963 char *exception
, *service
;
965 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
966 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
968 if (!exception
|| !service
)
971 sense
= (struct tape_3590_sense
*) irb
->ecw
;
972 /* Exception Message */
973 switch (sense
->fmt
.f70
.emc
) {
975 snprintf(exception
, BUFSIZE
, "Data degraded");
978 snprintf(exception
, BUFSIZE
, "Data degraded in partion %i",
982 snprintf(exception
, BUFSIZE
, "Medium degraded");
985 snprintf(exception
, BUFSIZE
, "Medium degraded in partition %i",
989 snprintf(exception
, BUFSIZE
, "Block 0 Error");
992 snprintf(exception
, BUFSIZE
, "Medium Exception 0x%02x",
996 snprintf(exception
, BUFSIZE
, "0x%02x",
1000 /* Service Message */
1001 switch (sense
->fmt
.f70
.smc
) {
1003 snprintf(service
, BUFSIZE
, "Reference Media maintenance "
1004 "procedure %i", sense
->fmt
.f70
.md
);
1007 snprintf(service
, BUFSIZE
, "0x%02x",
1008 sense
->fmt
.f70
.smc
);
1012 dev_warn (&device
->cdev
->dev
, "Tape media information: exception %s, "
1013 "service %s\n", exception
, service
);
1021 * Print an I/O Subsystem Service Information Message (message code f1)
1024 tape_3590_print_io_sim_msg_f1(struct tape_device
*device
, struct irb
*irb
)
1026 struct tape_3590_sense
*sense
;
1027 char *exception
, *service
;
1029 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1030 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1032 if (!exception
|| !service
)
1035 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1036 /* Exception Message */
1037 switch (sense
->fmt
.f71
.emc
) {
1039 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1042 snprintf(exception
, BUFSIZE
, "CU Exception - no performance "
1046 snprintf(exception
, BUFSIZE
, "CU Exception on channel "
1047 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1050 snprintf(exception
, BUFSIZE
, "CU Exception on device path "
1051 "0x%02x", sense
->fmt
.f71
.md
[0]);
1054 snprintf(exception
, BUFSIZE
, "CU Exception on library path "
1055 "0x%02x", sense
->fmt
.f71
.md
[0]);
1058 snprintf(exception
, BUFSIZE
, "CU Exception on node 0x%02x",
1059 sense
->fmt
.f71
.md
[0]);
1062 snprintf(exception
, BUFSIZE
, "CU Exception on partition "
1063 "0x%02x", sense
->fmt
.f71
.md
[0]);
1066 snprintf(exception
, BUFSIZE
, "0x%02x",
1067 sense
->fmt
.f71
.emc
);
1069 /* Service Message */
1070 switch (sense
->fmt
.f71
.smc
) {
1072 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1075 snprintf(service
, BUFSIZE
, "Repair will not impact cu "
1079 if (sense
->fmt
.f71
.mdf
== 0)
1080 snprintf(service
, BUFSIZE
, "Repair will disable node "
1081 "0x%x on CU", sense
->fmt
.f71
.md
[1]);
1083 snprintf(service
, BUFSIZE
, "Repair will disable "
1084 "nodes (0x%x-0x%x) on CU", sense
->fmt
.f71
.md
[1],
1085 sense
->fmt
.f71
.md
[2]);
1088 if (sense
->fmt
.f71
.mdf
== 0)
1089 snprintf(service
, BUFSIZE
, "Repair will disable "
1090 "channel path 0x%x on CU",
1091 sense
->fmt
.f71
.md
[1]);
1093 snprintf(service
, BUFSIZE
, "Repair will disable channel"
1094 " paths (0x%x-0x%x) on CU",
1095 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1098 if (sense
->fmt
.f71
.mdf
== 0)
1099 snprintf(service
, BUFSIZE
, "Repair will disable device"
1100 " path 0x%x on CU", sense
->fmt
.f71
.md
[1]);
1102 snprintf(service
, BUFSIZE
, "Repair will disable device"
1103 " paths (0x%x-0x%x) on CU",
1104 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1107 if (sense
->fmt
.f71
.mdf
== 0)
1108 snprintf(service
, BUFSIZE
, "Repair will disable "
1109 "library path 0x%x on CU",
1110 sense
->fmt
.f71
.md
[1]);
1112 snprintf(service
, BUFSIZE
, "Repair will disable "
1113 "library paths (0x%x-0x%x) on CU",
1114 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1117 snprintf(service
, BUFSIZE
, "Repair will disable access to CU");
1120 snprintf(service
, BUFSIZE
, "0x%02x",
1121 sense
->fmt
.f71
.smc
);
1124 dev_warn (&device
->cdev
->dev
, "I/O subsystem information: exception"
1125 " %s, service %s\n", exception
, service
);
1132 * Print an Device Subsystem Service Information Message (message code f2)
1135 tape_3590_print_dev_sim_msg_f2(struct tape_device
*device
, struct irb
*irb
)
1137 struct tape_3590_sense
*sense
;
1138 char *exception
, *service
;
1140 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1141 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1143 if (!exception
|| !service
)
1146 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1147 /* Exception Message */
1148 switch (sense
->fmt
.f71
.emc
) {
1150 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1153 snprintf(exception
, BUFSIZE
, "DV Exception - no performance"
1157 snprintf(exception
, BUFSIZE
, "DV Exception on channel "
1158 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1161 snprintf(exception
, BUFSIZE
, "DV Exception on loader 0x%02x",
1162 sense
->fmt
.f71
.md
[0]);
1165 snprintf(exception
, BUFSIZE
, "DV Exception on message display"
1166 " 0x%02x", sense
->fmt
.f71
.md
[0]);
1169 snprintf(exception
, BUFSIZE
, "DV Exception in tape path");
1172 snprintf(exception
, BUFSIZE
, "DV Exception in drive");
1175 snprintf(exception
, BUFSIZE
, "0x%02x",
1176 sense
->fmt
.f71
.emc
);
1178 /* Service Message */
1179 switch (sense
->fmt
.f71
.smc
) {
1181 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1184 snprintf(service
, BUFSIZE
, "Repair will not impact device "
1188 if (sense
->fmt
.f71
.mdf
== 0)
1189 snprintf(service
, BUFSIZE
, "Repair will disable "
1190 "channel path 0x%x on DV",
1191 sense
->fmt
.f71
.md
[1]);
1193 snprintf(service
, BUFSIZE
, "Repair will disable "
1194 "channel path (0x%x-0x%x) on DV",
1195 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1198 if (sense
->fmt
.f71
.mdf
== 0)
1199 snprintf(service
, BUFSIZE
, "Repair will disable "
1200 "interface 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1202 snprintf(service
, BUFSIZE
, "Repair will disable "
1203 "interfaces (0x%x-0x%x) on DV",
1204 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1207 if (sense
->fmt
.f71
.mdf
== 0)
1208 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1209 " 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1211 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1212 " (0x%x-0x%x) on DV",
1213 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1216 snprintf(service
, BUFSIZE
, "Repair will disable access to DV");
1219 if (sense
->fmt
.f71
.mdf
== 0)
1220 snprintf(service
, BUFSIZE
, "Repair will disable "
1221 "message display 0x%x on DV",
1222 sense
->fmt
.f71
.md
[1]);
1224 snprintf(service
, BUFSIZE
, "Repair will disable "
1225 "message displays (0x%x-0x%x) on DV",
1226 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1229 snprintf(service
, BUFSIZE
, "Clean DV");
1232 snprintf(service
, BUFSIZE
, "0x%02x",
1233 sense
->fmt
.f71
.smc
);
1236 dev_warn (&device
->cdev
->dev
, "Device subsystem information: exception"
1237 " %s, service %s\n", exception
, service
);
1244 * Print standard ERA Message
1247 tape_3590_print_era_msg(struct tape_device
*device
, struct irb
*irb
)
1249 struct tape_3590_sense
*sense
;
1251 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1254 if ((sense
->mc
> 0) && (sense
->mc
< TAPE_3590_MAX_MSG
)) {
1255 if (tape_3590_msg
[sense
->mc
] != NULL
)
1256 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1257 "issued sense message %s\n",
1258 tape_3590_msg
[sense
->mc
]);
1260 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1261 "issued an unknown sense message code 0x%x\n",
1265 if (sense
->mc
== 0xf0) {
1266 /* Standard Media Information Message */
1267 dev_warn (&device
->cdev
->dev
, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
1268 "RC=%02x-%04x-%02x\n", sense
->fmt
.f70
.sev
, sense
->mc
,
1269 sense
->fmt
.f70
.emc
, sense
->fmt
.f70
.smc
,
1270 sense
->fmt
.f70
.refcode
, sense
->fmt
.f70
.mid
,
1271 sense
->fmt
.f70
.fid
);
1272 tape_3590_print_mim_msg_f0(device
, irb
);
1275 if (sense
->mc
== 0xf1) {
1276 /* Standard I/O Subsystem Service Information Message */
1277 dev_warn (&device
->cdev
->dev
, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
1278 " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1279 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1280 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1281 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1282 sense
->fmt
.f71
.refcode3
);
1283 tape_3590_print_io_sim_msg_f1(device
, irb
);
1286 if (sense
->mc
== 0xf2) {
1287 /* Standard Device Service Information Message */
1288 dev_warn (&device
->cdev
->dev
, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
1289 ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1290 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1291 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1292 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1293 sense
->fmt
.f71
.refcode3
);
1294 tape_3590_print_dev_sim_msg_f2(device
, irb
);
1297 if (sense
->mc
== 0xf3) {
1298 /* Standard Library Service Information Message */
1301 dev_warn (&device
->cdev
->dev
, "The tape unit has issued an unknown "
1302 "sense message code %x\n", sense
->mc
);
1305 static int tape_3590_crypt_error(struct tape_device
*device
,
1306 struct tape_request
*request
, struct irb
*irb
)
1312 sense
= ((struct tape_3590_sense
*) irb
->ecw
)->fmt
.data
;
1314 ekm_rc2
= *((u16
*) &sense
[10]);
1315 if ((cu_rc
== 0) && (ekm_rc2
== 0xee31))
1316 /* key not defined on EKM */
1317 return tape_3590_erp_basic(device
, request
, irb
, -EKEYREJECTED
);
1318 if ((cu_rc
== 1) || (cu_rc
== 2))
1319 /* No connection to EKM */
1320 return tape_3590_erp_basic(device
, request
, irb
, -ENOTCONN
);
1322 dev_err (&device
->cdev
->dev
, "The tape unit failed to obtain the "
1323 "encryption key from EKM\n");
1325 return tape_3590_erp_basic(device
, request
, irb
, -ENOKEY
);
1329 * 3590 error Recovery routine:
1330 * If possible, it tries to recover from the error. If this is not possible,
1331 * inform the user about the problem.
1334 tape_3590_unit_check(struct tape_device
*device
, struct tape_request
*request
,
1337 struct tape_3590_sense
*sense
;
1339 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1341 DBF_EVENT(6, "Unit Check: RQC = %x\n", sense
->rc_rqc
);
1344 * First check all RC-QRCs where we want to do something special
1345 * - "break": basic error recovery is done
1346 * - "goto out:": just print error message if available
1348 switch (sense
->rc_rqc
) {
1351 tape_3590_print_era_msg(device
, irb
);
1352 return tape_3590_erp_read_buf_log(device
, request
, irb
);
1355 tape_3590_print_era_msg(device
, irb
);
1356 return tape_3590_erp_read_alternate(device
, request
, irb
);
1360 tape_3590_print_era_msg(device
, irb
);
1361 return tape_3590_erp_special_interrupt(device
, request
, irb
);
1363 return tape_3590_crypt_error(device
, request
, irb
);
1366 DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
1368 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1370 DBF_EVENT(2, "(%08x): Forward at End of Partition\n",
1372 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1374 DBF_EVENT(2, "(%08x): End of Data Mark\n", device
->cdev_id
);
1375 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1378 DBF_EVENT(2, "(%08x): Rewind Unload initiated\n",
1380 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1382 DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
1384 tape_med_state_set(device
, MS_UNLOADED
);
1385 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1386 return tape_3590_erp_basic(device
, request
, irb
, 0);
1390 * print additional msg since default msg
1391 * "device intervention" is not very meaningfull
1393 tape_med_state_set(device
, MS_UNLOADED
);
1394 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1395 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1396 case 0x4012: /* Device Long Busy */
1397 /* XXX: Also use long busy handling here? */
1398 DBF_EVENT(6, "(%08x): LONG BUSY\n", device
->cdev_id
);
1399 tape_3590_print_era_msg(device
, irb
);
1400 return tape_3590_erp_basic(device
, request
, irb
, -EBUSY
);
1402 DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device
->cdev_id
);
1403 return tape_3590_erp_long_busy(device
, request
, irb
);
1406 if (sense
->rac
== 0xd0) {
1408 tape_3590_print_era_msg(device
, irb
);
1409 return tape_3590_erp_swap(device
, request
, irb
);
1411 if (sense
->rac
== 0x26) {
1413 tape_3590_print_era_msg(device
, irb
);
1414 return tape_3590_erp_read_opposite(device
, request
,
1417 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1424 tape_3590_print_era_msg(device
, irb
);
1425 return tape_3590_erp_swap(device
, request
, irb
);
1429 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1433 tape_med_state_set(device
, MS_UNLOADED
);
1434 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1435 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1438 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1441 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1443 dev_warn (&device
->cdev
->dev
, "A different host has privileged"
1444 " access to the tape unit\n");
1445 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1447 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1452 * 3590 interrupt handler:
1455 tape_3590_irq(struct tape_device
*device
, struct tape_request
*request
,
1458 if (request
== NULL
)
1459 return tape_3590_unsolicited_irq(device
, irb
);
1461 if ((irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_EXCEP
) &&
1462 (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) &&
1463 (request
->op
== TO_WRI
)) {
1464 /* Write at end of volume */
1465 DBF_EVENT(2, "End of volume\n");
1466 return tape_3590_erp_failed(device
, request
, irb
, -ENOSPC
);
1469 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_CHECK
)
1470 return tape_3590_unit_check(device
, request
, irb
);
1472 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) {
1473 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_UNIT_EXCEP
) {
1474 if (request
->op
== TO_FSB
|| request
->op
== TO_BSB
)
1477 DBF_EVENT(5, "Unit Exception!\n");
1480 return tape_3590_done(device
, request
);
1483 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_CHN_END
) {
1484 DBF_EVENT(2, "channel end\n");
1485 return TAPE_IO_PENDING
;
1488 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
1489 DBF_EVENT(2, "Unit Attention when busy..\n");
1490 return TAPE_IO_PENDING
;
1493 DBF_EVENT(6, "xunknownirq\n");
1494 tape_dump_sense_dbf(device
, request
, irb
);
1495 return TAPE_IO_STOP
;
1499 static int tape_3590_read_dev_chars(struct tape_device
*device
,
1500 struct tape_3590_rdc_data
*rdc_data
)
1503 struct tape_request
*request
;
1505 request
= tape_alloc_request(1, sizeof(*rdc_data
));
1506 if (IS_ERR(request
))
1507 return PTR_ERR(request
);
1508 request
->op
= TO_RDC
;
1509 tape_ccw_end(request
->cpaddr
, CCW_CMD_RDC
, sizeof(*rdc_data
),
1511 rc
= tape_do_io(device
, request
);
1513 memcpy(rdc_data
, request
->cpdata
, sizeof(*rdc_data
));
1514 tape_free_request(request
);
1519 * Setup device function
1522 tape_3590_setup_device(struct tape_device
*device
)
1525 struct tape_3590_disc_data
*data
;
1526 struct tape_3590_rdc_data
*rdc_data
;
1528 DBF_EVENT(6, "3590 device setup\n");
1529 data
= kzalloc(sizeof(struct tape_3590_disc_data
), GFP_KERNEL
| GFP_DMA
);
1532 data
->read_back_op
= READ_PREVIOUS
;
1533 device
->discdata
= data
;
1535 rdc_data
= kmalloc(sizeof(*rdc_data
), GFP_KERNEL
| GFP_DMA
);
1540 rc
= tape_3590_read_dev_chars(device
, rdc_data
);
1542 DBF_LH(3, "Read device characteristics failed!\n");
1545 rc
= tape_std_assign(device
);
1548 if (rdc_data
->data
[31] == 0x13) {
1549 data
->crypt_info
.capability
|= TAPE390_CRYPT_SUPPORTED_MASK
;
1550 tape_3592_disable_crypt(device
);
1552 DBF_EVENT(6, "Device has NO crypto support\n");
1554 /* Try to find out if medium is loaded */
1555 rc
= tape_3590_sense_medium(device
);
1557 DBF_LH(3, "3590 medium sense returned %d\n", rc
);
1570 * Cleanup device function
1573 tape_3590_cleanup_device(struct tape_device
*device
)
1575 flush_workqueue(tape_3590_wq
);
1576 tape_std_unassign(device
);
1578 kfree(device
->discdata
);
1579 device
->discdata
= NULL
;
1583 * List of 3590 magnetic tape commands.
1585 static tape_mtop_fn tape_3590_mtop
[TAPE_NR_MTOPS
] = {
1586 [MTRESET
] = tape_std_mtreset
,
1587 [MTFSF
] = tape_std_mtfsf
,
1588 [MTBSF
] = tape_std_mtbsf
,
1589 [MTFSR
] = tape_std_mtfsr
,
1590 [MTBSR
] = tape_std_mtbsr
,
1591 [MTWEOF
] = tape_std_mtweof
,
1592 [MTREW
] = tape_std_mtrew
,
1593 [MTOFFL
] = tape_std_mtoffl
,
1594 [MTNOP
] = tape_std_mtnop
,
1595 [MTRETEN
] = tape_std_mtreten
,
1596 [MTBSFM
] = tape_std_mtbsfm
,
1597 [MTFSFM
] = tape_std_mtfsfm
,
1598 [MTEOM
] = tape_std_mteom
,
1599 [MTERASE
] = tape_std_mterase
,
1603 [MTSETBLK
] = tape_std_mtsetblk
,
1604 [MTSETDENSITY
] = NULL
,
1605 [MTSEEK
] = tape_3590_mtseek
,
1606 [MTTELL
] = tape_3590_mttell
,
1607 [MTSETDRVBUFFER
] = NULL
,
1613 [MTLOAD
] = tape_std_mtload
,
1614 [MTUNLOAD
] = tape_std_mtunload
,
1615 [MTCOMPRESSION
] = tape_std_mtcompression
,
1621 * Tape discipline structure for 3590.
1623 static struct tape_discipline tape_discipline_3590
= {
1624 .owner
= THIS_MODULE
,
1625 .setup_device
= tape_3590_setup_device
,
1626 .cleanup_device
= tape_3590_cleanup_device
,
1627 .process_eov
= tape_std_process_eov
,
1628 .irq
= tape_3590_irq
,
1629 .read_block
= tape_std_read_block
,
1630 .write_block
= tape_std_write_block
,
1631 .ioctl_fn
= tape_3590_ioctl
,
1632 .mtop_array
= tape_3590_mtop
1635 static struct ccw_device_id tape_3590_ids
[] = {
1636 {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info
= tape_3590
},
1637 {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info
= tape_3592
},
1638 { /* end of list */ }
1642 tape_3590_online(struct ccw_device
*cdev
)
1644 return tape_generic_online(dev_get_drvdata(&cdev
->dev
),
1645 &tape_discipline_3590
);
1648 static struct ccw_driver tape_3590_driver
= {
1650 .name
= "tape_3590",
1651 .owner
= THIS_MODULE
,
1653 .ids
= tape_3590_ids
,
1654 .probe
= tape_generic_probe
,
1655 .remove
= tape_generic_remove
,
1656 .set_offline
= tape_generic_offline
,
1657 .set_online
= tape_3590_online
,
1658 .freeze
= tape_generic_pm_suspend
,
1659 .int_class
= IRQIO_TAP
,
1663 * Setup discipline structure.
1666 tape_3590_init(void)
1670 TAPE_DBF_AREA
= debug_register("tape_3590", 2, 2, 4 * sizeof(long));
1671 debug_register_view(TAPE_DBF_AREA
, &debug_sprintf_view
);
1672 #ifdef DBF_LIKE_HELL
1673 debug_set_level(TAPE_DBF_AREA
, 6);
1676 DBF_EVENT(3, "3590 init\n");
1678 tape_3590_wq
= alloc_workqueue("tape_3590", 0, 0);
1682 /* Register driver for 3590 tapes. */
1683 rc
= ccw_driver_register(&tape_3590_driver
);
1685 destroy_workqueue(tape_3590_wq
);
1686 DBF_EVENT(3, "3590 init failed\n");
1688 DBF_EVENT(3, "3590 registered\n");
1693 tape_3590_exit(void)
1695 ccw_driver_unregister(&tape_3590_driver
);
1696 destroy_workqueue(tape_3590_wq
);
1697 debug_unregister(TAPE_DBF_AREA
);
1700 MODULE_DEVICE_TABLE(ccw
, tape_3590_ids
);
1701 MODULE_AUTHOR("(C) 2001,2006 IBM Corporation");
1702 MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver");
1703 MODULE_LICENSE("GPL");
1705 module_init(tape_3590_init
);
1706 module_exit(tape_3590_exit
);