2 * I2C access for DA9052 PMICs.
4 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 * Author: David Dajun Chen <dchen@diasemi.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
15 #include <linux/device.h>
16 #include <linux/module.h>
17 #include <linux/input.h>
18 #include <linux/mfd/core.h>
19 #include <linux/i2c.h>
20 #include <linux/err.h>
22 #include <linux/mfd/da9052/da9052.h>
23 #include <linux/mfd/da9052/reg.h>
27 #include <linux/of_device.h>
30 /* I2C safe register check */
31 static inline bool i2c_safe_reg(unsigned char reg
)
34 case DA9052_STATUS_A_REG
:
35 case DA9052_STATUS_B_REG
:
36 case DA9052_STATUS_C_REG
:
37 case DA9052_STATUS_D_REG
:
38 case DA9052_ADC_RES_L_REG
:
39 case DA9052_ADC_RES_H_REG
:
40 case DA9052_VDD_RES_REG
:
41 case DA9052_ICHG_AV_REG
:
42 case DA9052_TBAT_RES_REG
:
43 case DA9052_ADCIN4_RES_REG
:
44 case DA9052_ADCIN5_RES_REG
:
45 case DA9052_ADCIN6_RES_REG
:
46 case DA9052_TJUNC_RES_REG
:
47 case DA9052_TSI_X_MSB_REG
:
48 case DA9052_TSI_Y_MSB_REG
:
49 case DA9052_TSI_LSB_REG
:
50 case DA9052_TSI_Z_MSB_REG
:
58 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
59 * gets lockup up or fails to respond following a system reset.
60 * This fix is to follow any read or write with a dummy read to a safe
63 static int da9052_i2c_fix(struct da9052
*da9052
, unsigned char reg
)
67 switch (da9052
->chip_id
) {
72 /* A dummy read to a safe register address. */
73 if (!i2c_safe_reg(reg
))
74 return regmap_read(da9052
->regmap
,
81 * For other chips parking of I2C register
82 * to a safe place is not required.
91 * According to errata item 24, multiwrite mode should be avoided
92 * in order to prevent register data corruption after power-down.
94 static int da9052_i2c_disable_multiwrite(struct da9052
*da9052
)
98 ret
= regmap_read(da9052
->regmap
, DA9052_CONTROL_B_REG
, ®_val
);
102 if (!(reg_val
& DA9052_CONTROL_B_WRITEMODE
)) {
103 reg_val
|= DA9052_CONTROL_B_WRITEMODE
;
104 ret
= regmap_write(da9052
->regmap
, DA9052_CONTROL_B_REG
,
113 static const struct i2c_device_id da9052_i2c_id
[] = {
115 {"da9053-aa", DA9053_AA
},
116 {"da9053-ba", DA9053_BA
},
117 {"da9053-bb", DA9053_BB
},
118 {"da9053-bc", DA9053_BC
},
123 static const struct of_device_id dialog_dt_ids
[] = {
124 { .compatible
= "dlg,da9052", .data
= &da9052_i2c_id
[0] },
125 { .compatible
= "dlg,da9053-aa", .data
= &da9052_i2c_id
[1] },
126 { .compatible
= "dlg,da9053-ba", .data
= &da9052_i2c_id
[2] },
127 { .compatible
= "dlg,da9053-bb", .data
= &da9052_i2c_id
[3] },
128 { .compatible
= "dlg,da9053-bc", .data
= &da9052_i2c_id
[4] },
133 static int da9052_i2c_probe(struct i2c_client
*client
,
134 const struct i2c_device_id
*id
)
136 struct da9052
*da9052
;
139 da9052
= devm_kzalloc(&client
->dev
, sizeof(struct da9052
), GFP_KERNEL
);
143 da9052
->dev
= &client
->dev
;
144 da9052
->chip_irq
= client
->irq
;
145 da9052
->fix_io
= da9052_i2c_fix
;
147 i2c_set_clientdata(client
, da9052
);
149 da9052
->regmap
= devm_regmap_init_i2c(client
, &da9052_regmap_config
);
150 if (IS_ERR(da9052
->regmap
)) {
151 ret
= PTR_ERR(da9052
->regmap
);
152 dev_err(&client
->dev
, "Failed to allocate register map: %d\n",
157 ret
= da9052_i2c_disable_multiwrite(da9052
);
163 struct device_node
*np
= client
->dev
.of_node
;
164 const struct of_device_id
*deviceid
;
166 deviceid
= of_match_node(dialog_dt_ids
, np
);
173 dev_err(&client
->dev
, "id is null.\n");
177 return da9052_device_init(da9052
, id
->driver_data
);
180 static int da9052_i2c_remove(struct i2c_client
*client
)
182 struct da9052
*da9052
= i2c_get_clientdata(client
);
184 da9052_device_exit(da9052
);
188 static struct i2c_driver da9052_i2c_driver
= {
189 .probe
= da9052_i2c_probe
,
190 .remove
= da9052_i2c_remove
,
191 .id_table
= da9052_i2c_id
,
195 .of_match_table
= dialog_dt_ids
,
200 static int __init
da9052_i2c_init(void)
204 ret
= i2c_add_driver(&da9052_i2c_driver
);
206 pr_err("DA9052 I2C registration failed %d\n", ret
);
212 subsys_initcall(da9052_i2c_init
);
214 static void __exit
da9052_i2c_exit(void)
216 i2c_del_driver(&da9052_i2c_driver
);
218 module_exit(da9052_i2c_exit
);
220 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
221 MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
222 MODULE_LICENSE("GPL");