?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
kernel/printk: Convert to hotplug state machine
[linux/fpc-iii.git] / drivers / tty / cyclades.c
blob5e4fa920686151f94042af7b9e193d3d0486481f
1 #undef BLOCKMOVE
2 #define Z_WAKE
3 #undef Z_EXT_CHARS_IN_BUFFER
4
5 /*
6 * This file contains the driver for the Cyclades async multiport
7 * serial boards.
8 *
9 * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
10 * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
11 *
12 * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
13 *
14 * Much of the design and some of the code came from serial.c
15 * which was copyright (C) 1991, 1992 Linus Torvalds. It was
16 * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
17 * and then fixed as suggested by Michael K. Johnson 12/12/92.
18 * Converted to pci probing and cleaned up by Jiri Slaby.
19 *
20 */
21
22 #define CY_VERSION "2.6"
23
24 /* If you need to install more boards than NR_CARDS, change the constant
25 in the definition below. No other change is necessary to support up to
26 eight boards. Beyond that you'll have to extend cy_isa_addresses. */
27
28 #define NR_CARDS 4
29
30 /*
31 If the total number of ports is larger than NR_PORTS, change this
32 constant in the definition below. No other change is necessary to
33 support more boards/ports. */
34
35 #define NR_PORTS 256
36
37 #define ZO_V1 0
38 #define ZO_V2 1
39 #define ZE_V1 2
40
41 #define SERIAL_PARANOIA_CHECK
42 #undef CY_DEBUG_OPEN
43 #undef CY_DEBUG_THROTTLE
44 #undef CY_DEBUG_OTHER
45 #undef CY_DEBUG_IO
46 #undef CY_DEBUG_COUNT
47 #undef CY_DEBUG_DTR
48 #undef CY_DEBUG_INTERRUPTS
49 #undef CY_16Y_HACK
50 #undef CY_ENABLE_MONITORING
51 #undef CY_PCI_DEBUG
52
53 /*
54 * Include section
55 */
56 #include <linux/module.h>
57 #include <linux/errno.h>
58 #include <linux/signal.h>
59 #include <linux/sched.h>
60 #include <linux/timer.h>
61 #include <linux/interrupt.h>
62 #include <linux/tty.h>
63 #include <linux/tty_flip.h>
64 #include <linux/serial.h>
65 #include <linux/major.h>
66 #include <linux/string.h>
67 #include <linux/fcntl.h>
68 #include <linux/ptrace.h>
69 #include <linux/cyclades.h>
70 #include <linux/mm.h>
71 #include <linux/ioport.h>
72 #include <linux/init.h>
73 #include <linux/delay.h>
74 #include <linux/spinlock.h>
75 #include <linux/bitops.h>
76 #include <linux/firmware.h>
77 #include <linux/device.h>
78 #include <linux/slab.h>
79
80 #include <linux/io.h>
81 #include <linux/uaccess.h>
82
83 #include <linux/kernel.h>
84 #include <linux/pci.h>
85
86 #include <linux/stat.h>
87 #include <linux/proc_fs.h>
88 #include <linux/seq_file.h>
89
90 static void cy_send_xchar(struct tty_struct *tty, char ch);
91
92 #ifndef SERIAL_XMIT_SIZE
93 #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096))
94 #endif
95
96 /* firmware stuff */
97 #define ZL_MAX_BLOCKS 16
98 #define DRIVER_VERSION 0x02010203
99 #define RAM_SIZE 0x80000
100
101 enum zblock_type {
102 ZBLOCK_PRG = 0,
103 ZBLOCK_FPGA = 1
104 };
105
106 struct zfile_header {
107 char name[64];
108 char date[32];
109 char aux[32];
110 u32 n_config;
111 u32 config_offset;
112 u32 n_blocks;
113 u32 block_offset;
114 u32 reserved[9];
115 } __attribute__ ((packed));
116
117 struct zfile_config {
118 char name[64];
119 u32 mailbox;
120 u32 function;
121 u32 n_blocks;
122 u32 block_list[ZL_MAX_BLOCKS];
123 } __attribute__ ((packed));
124
125 struct zfile_block {
126 u32 type;
127 u32 file_offset;
128 u32 ram_offset;
129 u32 size;
130 } __attribute__ ((packed));
131
132 static struct tty_driver *cy_serial_driver;
133
134 #ifdef CONFIG_ISA
135 /* This is the address lookup table. The driver will probe for
136 Cyclom-Y/ISA boards at all addresses in here. If you want the
137 driver to probe addresses at a different address, add it to
138 this table. If the driver is probing some other board and
139 causing problems, remove the offending address from this table.
140 */
141
142 static unsigned int cy_isa_addresses[] = {
143 0xD0000,
144 0xD2000,
145 0xD4000,
146 0xD6000,
147 0xD8000,
148 0xDA000,
149 0xDC000,
150 0xDE000,
151 0, 0, 0, 0, 0, 0, 0, 0
152 };
153
154 #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
155
156 static long maddr[NR_CARDS];
157 static int irq[NR_CARDS];
158
159 module_param_array(maddr, long, NULL, 0);
160 module_param_array(irq, int, NULL, 0);
161
162 #endif /* CONFIG_ISA */
163
164 /* This is the per-card data structure containing address, irq, number of
165 channels, etc. This driver supports a maximum of NR_CARDS cards.
166 */
167 static struct cyclades_card cy_card[NR_CARDS];
168
169 static int cy_next_channel; /* next minor available */
170
171 /*
172 * This is used to look up the divisor speeds and the timeouts
173 * We're normally limited to 15 distinct baud rates. The extra
174 * are accessed via settings in info->port.flags.
175 * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
176 * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
177 * HI VHI
178 * 20
179 */
180 static const int baud_table[] = {
181 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
182 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
183 230400, 0
184 };
185
186 static const char baud_co_25[] = { /* 25 MHz clock option table */
187 /* value => 00 01 02 03 04 */
188 /* divide by 8 32 128 512 2048 */
189 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
190 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
191 };
192
193 static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */
194 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
195 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
196 };
197
198 static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
199 /* value => 00 01 02 03 04 */
200 /* divide by 8 32 128 512 2048 */
201 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
202 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
203 0x00
204 };
205
206 static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
207 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
208 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
209 0x21
210 };
211
212 static const char baud_cor3[] = { /* receive threshold */
213 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
214 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
215 0x07
216 };
217
218 /*
219 * The Cyclades driver implements HW flow control as any serial driver.
220 * The cyclades_port structure member rflow and the vector rflow_thr
221 * allows us to take advantage of a special feature in the CD1400 to avoid
222 * data loss even when the system interrupt latency is too high. These flags
223 * are to be used only with very special applications. Setting these flags
224 * requires the use of a special cable (DTR and RTS reversed). In the new
225 * CD1400-based boards (rev. 6.00 or later), there is no need for special
226 * cables.
227 */
228
229 static const char rflow_thr[] = { /* rflow threshold */
230 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
231 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
232 0x0a
233 };
234
235 /* The Cyclom-Ye has placed the sequential chips in non-sequential
236 * address order. This look-up table overcomes that problem.
237 */
238 static const unsigned int cy_chip_offset[] = { 0x0000,
239 0x0400,
240 0x0800,
241 0x0C00,
242 0x0200,
243 0x0600,
244 0x0A00,
245 0x0E00
246 };
247
248 /* PCI related definitions */
249
250 #ifdef CONFIG_PCI
251 static const struct pci_device_id cy_pci_dev_id[] = {
252 /* PCI < 1Mb */
253 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
254 /* PCI > 1Mb */
255 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) },
256 /* 4Y PCI < 1Mb */
257 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) },
258 /* 4Y PCI > 1Mb */
259 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) },
260 /* 8Y PCI < 1Mb */
261 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) },
262 /* 8Y PCI > 1Mb */
263 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) },
264 /* Z PCI < 1Mb */
265 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) },
266 /* Z PCI > 1Mb */
267 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) },
268 { } /* end of table */
269 };
270 MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
271 #endif
272
273 static void cy_start(struct tty_struct *);
274 static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
275 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
276 #ifdef CONFIG_ISA
277 static unsigned detect_isa_irq(void __iomem *);
278 #endif /* CONFIG_ISA */
279
280 #ifndef CONFIG_CYZ_INTR
281 static void cyz_poll(unsigned long);
282
283 /* The Cyclades-Z polling cycle is defined by this variable */
284 static long cyz_polling_cycle = CZ_DEF_POLL;
285
286 static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0);
287
288 #else /* CONFIG_CYZ_INTR */
289 static void cyz_rx_restart(unsigned long);
290 static struct timer_list cyz_rx_full_timer[NR_PORTS];
291 #endif /* CONFIG_CYZ_INTR */
292
293 static void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
294 {
295 struct cyclades_card *card = port->card;
296
297 cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
298 }
299
300 static u8 cyy_readb(struct cyclades_port *port, u32 reg)
301 {
302 struct cyclades_card *card = port->card;
303
304 return readb(port->u.cyy.base_addr + (reg << card->bus_index));
305 }
306
307 static inline bool cy_is_Z(struct cyclades_card *card)
308 {
309 return card->num_chips == (unsigned int)-1;
310 }
311
312 static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
313 {
314 return readl(&ctl_addr->init_ctrl) & (1 << 17);
315 }
316
317 static inline bool cyz_fpga_loaded(struct cyclades_card *card)
318 {
319 return __cyz_fpga_loaded(card->ctl_addr.p9060);
320 }
321
322 static bool cyz_is_loaded(struct cyclades_card *card)
323 {
324 struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
325
326 return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
327 readl(&fw_id->signature) == ZFIRM_ID;
328 }
329
330 static int serial_paranoia_check(struct cyclades_port *info,
331 const char *name, const char *routine)
332 {
333 #ifdef SERIAL_PARANOIA_CHECK
334 if (!info) {
335 printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) "
336 "in %s\n", name, routine);
337 return 1;
338 }
339
340 if (info->magic != CYCLADES_MAGIC) {
341 printk(KERN_WARNING "cyc Warning: bad magic number for serial "
342 "struct (%s) in %s\n", name, routine);
343 return 1;
344 }
345 #endif
346 return 0;
347 }
348
349 /***********************************************************/
350 /********* Start of block of Cyclom-Y specific code ********/
351
352 /* This routine waits up to 1000 micro-seconds for the previous
353 command to the Cirrus chip to complete and then issues the
354 new command. An error is returned if the previous command
355 didn't finish within the time limit.
356
357 This function is only called from inside spinlock-protected code.
358 */
359 static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
360 {
361 void __iomem *ccr = base_addr + (CyCCR << index);
362 unsigned int i;
363
364 /* Check to see that the previous command has completed */
365 for (i = 0; i < 100; i++) {
366 if (readb(ccr) == 0)
367 break;
368 udelay(10L);
369 }
370 /* if the CCR never cleared, the previous command
371 didn't finish within the "reasonable time" */
372 if (i == 100)
373 return -1;
374
375 /* Issue the new command */
376 cy_writeb(ccr, cmd);
377
378 return 0;
379 }
380
381 static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
382 {
383 return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
384 port->card->bus_index);
385 }
386
387 #ifdef CONFIG_ISA
388 /* ISA interrupt detection code */
389 static unsigned detect_isa_irq(void __iomem *address)
390 {
391 int irq;
392 unsigned long irqs, flags;
393 int save_xir, save_car;
394 int index = 0; /* IRQ probing is only for ISA */
395
396 /* forget possible initially masked and pending IRQ */
397 irq = probe_irq_off(probe_irq_on());
398
399 /* Clear interrupts on the board first */
400 cy_writeb(address + (Cy_ClrIntr << index), 0);
401 /* Cy_ClrIntr is 0x1800 */
402
403 irqs = probe_irq_on();
404 /* Wait ... */
405 msleep(5);
406
407 /* Enable the Tx interrupts on the CD1400 */
408 local_irq_save(flags);
409 cy_writeb(address + (CyCAR << index), 0);
410 __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
411
412 cy_writeb(address + (CyCAR << index), 0);
413 cy_writeb(address + (CySRER << index),
414 readb(address + (CySRER << index)) | CyTxRdy);
415 local_irq_restore(flags);
416
417 /* Wait ... */
418 msleep(5);
419
420 /* Check which interrupt is in use */
421 irq = probe_irq_off(irqs);
422
423 /* Clean up */
424 save_xir = (u_char) readb(address + (CyTIR << index));
425 save_car = readb(address + (CyCAR << index));
426 cy_writeb(address + (CyCAR << index), (save_xir & 0x3));
427 cy_writeb(address + (CySRER << index),
428 readb(address + (CySRER << index)) & ~CyTxRdy);
429 cy_writeb(address + (CyTIR << index), (save_xir & 0x3f));
430 cy_writeb(address + (CyCAR << index), (save_car));
431 cy_writeb(address + (Cy_ClrIntr << index), 0);
432 /* Cy_ClrIntr is 0x1800 */
433
434 return (irq > 0) ? irq : 0;
435 }
436 #endif /* CONFIG_ISA */
437
438 static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
439 void __iomem *base_addr)
440 {
441 struct cyclades_port *info;
442 struct tty_port *port;
443 int len, index = cinfo->bus_index;
444 u8 ivr, save_xir, channel, save_car, data, char_count;
445
446 #ifdef CY_DEBUG_INTERRUPTS
447 printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
448 #endif
449 /* determine the channel & change to that context */
450 save_xir = readb(base_addr + (CyRIR << index));
451 channel = save_xir & CyIRChannel;
452 info = &cinfo->ports[channel + chip * 4];
453 port = &info->port;
454 save_car = cyy_readb(info, CyCAR);
455 cyy_writeb(info, CyCAR, save_xir);
456 ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
457
458 /* there is an open port for this data */
459 if (ivr == CyIVRRxEx) { /* exception */
460 data = cyy_readb(info, CyRDSR);
461
462 /* For statistics only */
463 if (data & CyBREAK)
464 info->icount.brk++;
465 else if (data & CyFRAME)
466 info->icount.frame++;
467 else if (data & CyPARITY)
468 info->icount.parity++;
469 else if (data & CyOVERRUN)
470 info->icount.overrun++;
471
472 if (data & info->ignore_status_mask) {
473 info->icount.rx++;
474 return;
475 }
476 if (tty_buffer_request_room(port, 1)) {
477 if (data & info->read_status_mask) {
478 if (data & CyBREAK) {
479 tty_insert_flip_char(port,
480 cyy_readb(info, CyRDSR),
481 TTY_BREAK);
482 info->icount.rx++;
483 if (port->flags & ASYNC_SAK) {
484 struct tty_struct *tty =
485 tty_port_tty_get(port);
486 if (tty) {
487 do_SAK(tty);
488 tty_kref_put(tty);
489 }
490 }
491 } else if (data & CyFRAME) {
492 tty_insert_flip_char(port,
493 cyy_readb(info, CyRDSR),
494 TTY_FRAME);
495 info->icount.rx++;
496 info->idle_stats.frame_errs++;
497 } else if (data & CyPARITY) {
498 /* Pieces of seven... */
499 tty_insert_flip_char(port,
500 cyy_readb(info, CyRDSR),
501 TTY_PARITY);
502 info->icount.rx++;
503 info->idle_stats.parity_errs++;
504 } else if (data & CyOVERRUN) {
505 tty_insert_flip_char(port, 0,
506 TTY_OVERRUN);
507 info->icount.rx++;
508 /* If the flip buffer itself is
509 overflowing, we still lose
510 the next incoming character.
511 */
512 tty_insert_flip_char(port,
513 cyy_readb(info, CyRDSR),
514 TTY_FRAME);
515 info->icount.rx++;
516 info->idle_stats.overruns++;
517 /* These two conditions may imply */
518 /* a normal read should be done. */
519 /* } else if(data & CyTIMEOUT) { */
520 /* } else if(data & CySPECHAR) { */
521 } else {
522 tty_insert_flip_char(port, 0,
523 TTY_NORMAL);
524 info->icount.rx++;
525 }
526 } else {
527 tty_insert_flip_char(port, 0, TTY_NORMAL);
528 info->icount.rx++;
529 }
530 } else {
531 /* there was a software buffer overrun and nothing
532 * could be done about it!!! */
533 info->icount.buf_overrun++;
534 info->idle_stats.overruns++;
535 }
536 } else { /* normal character reception */
537 /* load # chars available from the chip */
538 char_count = cyy_readb(info, CyRDCR);
539
540 #ifdef CY_ENABLE_MONITORING
541 ++info->mon.int_count;
542 info->mon.char_count += char_count;
543 if (char_count > info->mon.char_max)
544 info->mon.char_max = char_count;
545 info->mon.char_last = char_count;
546 #endif
547 len = tty_buffer_request_room(port, char_count);
548 while (len--) {
549 data = cyy_readb(info, CyRDSR);
550 tty_insert_flip_char(port, data, TTY_NORMAL);
551 info->idle_stats.recv_bytes++;
552 info->icount.rx++;
553 #ifdef CY_16Y_HACK
554 udelay(10L);
555 #endif
556 }
557 info->idle_stats.recv_idle = jiffies;
558 }
559 tty_schedule_flip(port);
560
561 /* end of service */
562 cyy_writeb(info, CyRIR, save_xir & 0x3f);
563 cyy_writeb(info, CyCAR, save_car);
564 }
565
566 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
567 void __iomem *base_addr)
568 {
569 struct cyclades_port *info;
570 struct tty_struct *tty;
571 int char_count, index = cinfo->bus_index;
572 u8 save_xir, channel, save_car, outch;
573
574 /* Since we only get here when the transmit buffer
575 is empty, we know we can always stuff a dozen
576 characters. */
577 #ifdef CY_DEBUG_INTERRUPTS
578 printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
579 #endif
580
581 /* determine the channel & change to that context */
582 save_xir = readb(base_addr + (CyTIR << index));
583 channel = save_xir & CyIRChannel;
584 save_car = readb(base_addr + (CyCAR << index));
585 cy_writeb(base_addr + (CyCAR << index), save_xir);
586
587 info = &cinfo->ports[channel + chip * 4];
588 tty = tty_port_tty_get(&info->port);
589 if (tty == NULL) {
590 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
591 goto end;
592 }
593
594 /* load the on-chip space for outbound data */
595 char_count = info->xmit_fifo_size;
596
597 if (info->x_char) { /* send special char */
598 outch = info->x_char;
599 cyy_writeb(info, CyTDR, outch);
600 char_count--;
601 info->icount.tx++;
602 info->x_char = 0;
603 }
604
605 if (info->breakon || info->breakoff) {
606 if (info->breakon) {
607 cyy_writeb(info, CyTDR, 0);
608 cyy_writeb(info, CyTDR, 0x81);
609 info->breakon = 0;
610 char_count -= 2;
611 }
612 if (info->breakoff) {
613 cyy_writeb(info, CyTDR, 0);
614 cyy_writeb(info, CyTDR, 0x83);
615 info->breakoff = 0;
616 char_count -= 2;
617 }
618 }
619
620 while (char_count-- > 0) {
621 if (!info->xmit_cnt) {
622 if (cyy_readb(info, CySRER) & CyTxMpty) {
623 cyy_writeb(info, CySRER,
624 cyy_readb(info, CySRER) & ~CyTxMpty);
625 } else {
626 cyy_writeb(info, CySRER, CyTxMpty |
627 (cyy_readb(info, CySRER) & ~CyTxRdy));
628 }
629 goto done;
630 }
631 if (info->port.xmit_buf == NULL) {
632 cyy_writeb(info, CySRER,
633 cyy_readb(info, CySRER) & ~CyTxRdy);
634 goto done;
635 }
636 if (tty->stopped || tty->hw_stopped) {
637 cyy_writeb(info, CySRER,
638 cyy_readb(info, CySRER) & ~CyTxRdy);
639 goto done;
640 }
641 /* Because the Embedded Transmit Commands have been enabled,
642 * we must check to see if the escape character, NULL, is being
643 * sent. If it is, we must ensure that there is room for it to
644 * be doubled in the output stream. Therefore we no longer
645 * advance the pointer when the character is fetched, but
646 * rather wait until after the check for a NULL output
647 * character. This is necessary because there may not be room
648 * for the two chars needed to send a NULL.)
649 */
650 outch = info->port.xmit_buf[info->xmit_tail];
651 if (outch) {
652 info->xmit_cnt--;
653 info->xmit_tail = (info->xmit_tail + 1) &
654 (SERIAL_XMIT_SIZE - 1);
655 cyy_writeb(info, CyTDR, outch);
656 info->icount.tx++;
657 } else {
658 if (char_count > 1) {
659 info->xmit_cnt--;
660 info->xmit_tail = (info->xmit_tail + 1) &
661 (SERIAL_XMIT_SIZE - 1);
662 cyy_writeb(info, CyTDR, outch);
663 cyy_writeb(info, CyTDR, 0);
664 info->icount.tx++;
665 char_count--;
666 }
667 }
668 }
669
670 done:
671 tty_wakeup(tty);
672 tty_kref_put(tty);
673 end:
674 /* end of service */
675 cyy_writeb(info, CyTIR, save_xir & 0x3f);
676 cyy_writeb(info, CyCAR, save_car);
677 }
678
679 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
680 void __iomem *base_addr)
681 {
682 struct cyclades_port *info;
683 struct tty_struct *tty;
684 int index = cinfo->bus_index;
685 u8 save_xir, channel, save_car, mdm_change, mdm_status;
686
687 /* determine the channel & change to that context */
688 save_xir = readb(base_addr + (CyMIR << index));
689 channel = save_xir & CyIRChannel;
690 info = &cinfo->ports[channel + chip * 4];
691 save_car = cyy_readb(info, CyCAR);
692 cyy_writeb(info, CyCAR, save_xir);
693
694 mdm_change = cyy_readb(info, CyMISR);
695 mdm_status = cyy_readb(info, CyMSVR1);
696
697 tty = tty_port_tty_get(&info->port);
698 if (!tty)
699 goto end;
700
701 if (mdm_change & CyANY_DELTA) {
702 /* For statistics only */
703 if (mdm_change & CyDCD)
704 info->icount.dcd++;
705 if (mdm_change & CyCTS)
706 info->icount.cts++;
707 if (mdm_change & CyDSR)
708 info->icount.dsr++;
709 if (mdm_change & CyRI)
710 info->icount.rng++;
711
712 wake_up_interruptible(&info->port.delta_msr_wait);
713 }
714
715 if ((mdm_change & CyDCD) && tty_port_check_carrier(&info->port)) {
716 if (mdm_status & CyDCD)
717 wake_up_interruptible(&info->port.open_wait);
718 else
719 tty_hangup(tty);
720 }
721 if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
722 if (tty->hw_stopped) {
723 if (mdm_status & CyCTS) {
724 /* cy_start isn't used
725 because... !!! */
726 tty->hw_stopped = 0;
727 cyy_writeb(info, CySRER,
728 cyy_readb(info, CySRER) | CyTxRdy);
729 tty_wakeup(tty);
730 }
731 } else {
732 if (!(mdm_status & CyCTS)) {
733 /* cy_stop isn't used
734 because ... !!! */
735 tty->hw_stopped = 1;
736 cyy_writeb(info, CySRER,
737 cyy_readb(info, CySRER) & ~CyTxRdy);
738 }
739 }
740 }
741 /* if (mdm_change & CyDSR) {
742 }
743 if (mdm_change & CyRI) {
744 }*/
745 tty_kref_put(tty);
746 end:
747 /* end of service */
748 cyy_writeb(info, CyMIR, save_xir & 0x3f);
749 cyy_writeb(info, CyCAR, save_car);
750 }
751
752 /* The real interrupt service routine is called
753 whenever the card wants its hand held--chars
754 received, out buffer empty, modem change, etc.
755 */
756 static irqreturn_t cyy_interrupt(int irq, void *dev_id)
757 {
758 int status;
759 struct cyclades_card *cinfo = dev_id;
760 void __iomem *base_addr, *card_base_addr;
761 unsigned int chip, too_many, had_work;
762 int index;
763
764 if (unlikely(cinfo == NULL)) {
765 #ifdef CY_DEBUG_INTERRUPTS
766 printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",
767 irq);
768 #endif
769 return IRQ_NONE; /* spurious interrupt */
770 }
771
772 card_base_addr = cinfo->base_addr;
773 index = cinfo->bus_index;
774
775 /* card was not initialized yet (e.g. DEBUG_SHIRQ) */
776 if (unlikely(card_base_addr == NULL))
777 return IRQ_HANDLED;
778
779 /* This loop checks all chips in the card. Make a note whenever
780 _any_ chip had some work to do, as this is considered an
781 indication that there will be more to do. Only when no chip
782 has any work does this outermost loop exit.
783 */
784 do {
785 had_work = 0;
786 for (chip = 0; chip < cinfo->num_chips; chip++) {
787 base_addr = cinfo->base_addr +
788 (cy_chip_offset[chip] << index);
789 too_many = 0;
790 while ((status = readb(base_addr +
791 (CySVRR << index))) != 0x00) {
792 had_work++;
793 /* The purpose of the following test is to ensure that
794 no chip can monopolize the driver. This forces the
795 chips to be checked in a round-robin fashion (after
796 draining each of a bunch (1000) of characters).
797 */
798 if (1000 < too_many++)
799 break;
800 spin_lock(&cinfo->card_lock);
801 if (status & CySRReceive) /* rx intr */
802 cyy_chip_rx(cinfo, chip, base_addr);
803 if (status & CySRTransmit) /* tx intr */
804 cyy_chip_tx(cinfo, chip, base_addr);
805 if (status & CySRModem) /* modem intr */
806 cyy_chip_modem(cinfo, chip, base_addr);
807 spin_unlock(&cinfo->card_lock);
808 }
809 }
810 } while (had_work);
811
812 /* clear interrupts */
813 spin_lock(&cinfo->card_lock);
814 cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0);
815 /* Cy_ClrIntr is 0x1800 */
816 spin_unlock(&cinfo->card_lock);
817 return IRQ_HANDLED;
818 } /* cyy_interrupt */
819
820 static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
821 unsigned int clear)
822 {
823 struct cyclades_card *card = info->card;
824 int channel = info->line - card->first_line;
825 u32 rts, dtr, msvrr, msvrd;
826
827 channel &= 0x03;
828
829 if (info->rtsdtr_inv) {
830 msvrr = CyMSVR2;
831 msvrd = CyMSVR1;
832 rts = CyDTR;
833 dtr = CyRTS;
834 } else {
835 msvrr = CyMSVR1;
836 msvrd = CyMSVR2;
837 rts = CyRTS;
838 dtr = CyDTR;
839 }
840 if (set & TIOCM_RTS) {
841 cyy_writeb(info, CyCAR, channel);
842 cyy_writeb(info, msvrr, rts);
843 }
844 if (clear & TIOCM_RTS) {
845 cyy_writeb(info, CyCAR, channel);
846 cyy_writeb(info, msvrr, ~rts);
847 }
848 if (set & TIOCM_DTR) {
849 cyy_writeb(info, CyCAR, channel);
850 cyy_writeb(info, msvrd, dtr);
851 #ifdef CY_DEBUG_DTR
852 printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
853 printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
854 cyy_readb(info, CyMSVR1),
855 cyy_readb(info, CyMSVR2));
856 #endif
857 }
858 if (clear & TIOCM_DTR) {
859 cyy_writeb(info, CyCAR, channel);
860 cyy_writeb(info, msvrd, ~dtr);
861 #ifdef CY_DEBUG_DTR
862 printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
863 printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
864 cyy_readb(info, CyMSVR1),
865 cyy_readb(info, CyMSVR2));
866 #endif
867 }
868 }
869
870 /***********************************************************/
871 /********* End of block of Cyclom-Y specific code **********/
872 /******** Start of block of Cyclades-Z specific code *******/
873 /***********************************************************/
874
875 static int
876 cyz_fetch_msg(struct cyclades_card *cinfo,
877 __u32 *channel, __u8 *cmd, __u32 *param)
878 {
879 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
880 unsigned long loc_doorbell;
881
882 loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
883 if (loc_doorbell) {
884 *cmd = (char)(0xff & loc_doorbell);
885 *channel = readl(&board_ctrl->fwcmd_channel);
886 *param = (__u32) readl(&board_ctrl->fwcmd_param);
887 cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
888 return 1;
889 }
890 return 0;
891 } /* cyz_fetch_msg */
892
893 static int
894 cyz_issue_cmd(struct cyclades_card *cinfo,
895 __u32 channel, __u8 cmd, __u32 param)
896 {
897 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
898 __u32 __iomem *pci_doorbell;
899 unsigned int index;
900
901 if (!cyz_is_loaded(cinfo))
902 return -1;
903
904 index = 0;
905 pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
906 while ((readl(pci_doorbell) & 0xff) != 0) {
907 if (index++ == 1000)
908 return (int)(readl(pci_doorbell) & 0xff);
909 udelay(50L);
910 }
911 cy_writel(&board_ctrl->hcmd_channel, channel);
912 cy_writel(&board_ctrl->hcmd_param, param);
913 cy_writel(pci_doorbell, (long)cmd);
914
915 return 0;
916 } /* cyz_issue_cmd */
917
918 static void cyz_handle_rx(struct cyclades_port *info)
919 {
920 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
921 struct cyclades_card *cinfo = info->card;
922 struct tty_port *port = &info->port;
923 unsigned int char_count;
924 int len;
925 #ifdef BLOCKMOVE
926 unsigned char *buf;
927 #else
928 char data;
929 #endif
930 __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
931
932 rx_get = new_rx_get = readl(&buf_ctrl->rx_get);
933 rx_put = readl(&buf_ctrl->rx_put);
934 rx_bufsize = readl(&buf_ctrl->rx_bufsize);
935 rx_bufaddr = readl(&buf_ctrl->rx_bufaddr);
936 if (rx_put >= rx_get)
937 char_count = rx_put - rx_get;
938 else
939 char_count = rx_put - rx_get + rx_bufsize;
940
941 if (!char_count)
942 return;
943
944 #ifdef CY_ENABLE_MONITORING
945 info->mon.int_count++;
946 info->mon.char_count += char_count;
947 if (char_count > info->mon.char_max)
948 info->mon.char_max = char_count;
949 info->mon.char_last = char_count;
950 #endif
951
952 #ifdef BLOCKMOVE
953 /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
954 for performance, but because of buffer boundaries, there
955 may be several steps to the operation */
956 while (1) {
957 len = tty_prepare_flip_string(port, &buf,
958 char_count);
959 if (!len)
960 break;
961
962 len = min_t(unsigned int, min(len, char_count),
963 rx_bufsize - new_rx_get);
964
965 memcpy_fromio(buf, cinfo->base_addr +
966 rx_bufaddr + new_rx_get, len);
967
968 new_rx_get = (new_rx_get + len) &
969 (rx_bufsize - 1);
970 char_count -= len;
971 info->icount.rx += len;
972 info->idle_stats.recv_bytes += len;
973 }
974 #else
975 len = tty_buffer_request_room(port, char_count);
976 while (len--) {
977 data = readb(cinfo->base_addr + rx_bufaddr +
978 new_rx_get);
979 new_rx_get = (new_rx_get + 1) &
980 (rx_bufsize - 1);
981 tty_insert_flip_char(port, data, TTY_NORMAL);
982 info->idle_stats.recv_bytes++;
983 info->icount.rx++;
984 }
985 #endif
986 #ifdef CONFIG_CYZ_INTR
987 /* Recalculate the number of chars in the RX buffer and issue
988 a cmd in case it's higher than the RX high water mark */
989 rx_put = readl(&buf_ctrl->rx_put);
990 if (rx_put >= rx_get)
991 char_count = rx_put - rx_get;
992 else
993 char_count = rx_put - rx_get + rx_bufsize;
994 if (char_count >= readl(&buf_ctrl->rx_threshold) &&
995 !timer_pending(&cyz_rx_full_timer[
996 info->line]))
997 mod_timer(&cyz_rx_full_timer[info->line],
998 jiffies + 1);
999 #endif
1000 info->idle_stats.recv_idle = jiffies;
1001 tty_schedule_flip(&info->port);
1002
1003 /* Update rx_get */
1004 cy_writel(&buf_ctrl->rx_get, new_rx_get);
1005 }
1006
1007 static void cyz_handle_tx(struct cyclades_port *info)
1008 {
1009 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
1010 struct cyclades_card *cinfo = info->card;
1011 struct tty_struct *tty;
1012 u8 data;
1013 unsigned int char_count;
1014 #ifdef BLOCKMOVE
1015 int small_count;
1016 #endif
1017 __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr;
1018
1019 if (info->xmit_cnt <= 0) /* Nothing to transmit */
1020 return;
1021
1022 tx_get = readl(&buf_ctrl->tx_get);
1023 tx_put = readl(&buf_ctrl->tx_put);
1024 tx_bufsize = readl(&buf_ctrl->tx_bufsize);
1025 tx_bufaddr = readl(&buf_ctrl->tx_bufaddr);
1026 if (tx_put >= tx_get)
1027 char_count = tx_get - tx_put - 1 + tx_bufsize;
1028 else
1029 char_count = tx_get - tx_put - 1;
1030
1031 if (!char_count)
1032 return;
1033
1034 tty = tty_port_tty_get(&info->port);
1035 if (tty == NULL)
1036 goto ztxdone;
1037
1038 if (info->x_char) { /* send special char */
1039 data = info->x_char;
1040
1041 cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1042 tx_put = (tx_put + 1) & (tx_bufsize - 1);
1043 info->x_char = 0;
1044 char_count--;
1045 info->icount.tx++;
1046 }
1047 #ifdef BLOCKMOVE
1048 while (0 < (small_count = min_t(unsigned int,
1049 tx_bufsize - tx_put, min_t(unsigned int,
1050 (SERIAL_XMIT_SIZE - info->xmit_tail),
1051 min_t(unsigned int, info->xmit_cnt,
1052 char_count))))) {
1053
1054 memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put),
1055 &info->port.xmit_buf[info->xmit_tail],
1056 small_count);
1057
1058 tx_put = (tx_put + small_count) & (tx_bufsize - 1);
1059 char_count -= small_count;
1060 info->icount.tx += small_count;
1061 info->xmit_cnt -= small_count;
1062 info->xmit_tail = (info->xmit_tail + small_count) &
1063 (SERIAL_XMIT_SIZE - 1);
1064 }
1065 #else
1066 while (info->xmit_cnt && char_count) {
1067 data = info->port.xmit_buf[info->xmit_tail];
1068 info->xmit_cnt--;
1069 info->xmit_tail = (info->xmit_tail + 1) &
1070 (SERIAL_XMIT_SIZE - 1);
1071
1072 cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1073 tx_put = (tx_put + 1) & (tx_bufsize - 1);
1074 char_count--;
1075 info->icount.tx++;
1076 }
1077 #endif
1078 tty_wakeup(tty);
1079 tty_kref_put(tty);
1080 ztxdone:
1081 /* Update tx_put */
1082 cy_writel(&buf_ctrl->tx_put, tx_put);
1083 }
1084
1085 static void cyz_handle_cmd(struct cyclades_card *cinfo)
1086 {
1087 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
1088 struct cyclades_port *info;
1089 __u32 channel, param, fw_ver;
1090 __u8 cmd;
1091 int special_count;
1092 int delta_count;
1093
1094 fw_ver = readl(&board_ctrl->fw_version);
1095
1096 while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
1097 special_count = 0;
1098 delta_count = 0;
1099 info = &cinfo->ports[channel];
1100
1101 switch (cmd) {
1102 case C_CM_PR_ERROR:
1103 tty_insert_flip_char(&info->port, 0, TTY_PARITY);
1104 info->icount.rx++;
1105 special_count++;
1106 break;
1107 case C_CM_FR_ERROR:
1108 tty_insert_flip_char(&info->port, 0, TTY_FRAME);
1109 info->icount.rx++;
1110 special_count++;
1111 break;
1112 case C_CM_RXBRK:
1113 tty_insert_flip_char(&info->port, 0, TTY_BREAK);
1114 info->icount.rx++;
1115 special_count++;
1116 break;
1117 case C_CM_MDCD:
1118 info->icount.dcd++;
1119 delta_count++;
1120 if (tty_port_check_carrier(&info->port)) {
1121 u32 dcd = fw_ver > 241 ? param :
1122 readl(&info->u.cyz.ch_ctrl->rs_status);
1123 if (dcd & C_RS_DCD)
1124 wake_up_interruptible(&info->port.open_wait);
1125 else
1126 tty_port_tty_hangup(&info->port, false);
1127 }
1128 break;
1129 case C_CM_MCTS:
1130 info->icount.cts++;
1131 delta_count++;
1132 break;
1133 case C_CM_MRI:
1134 info->icount.rng++;
1135 delta_count++;
1136 break;
1137 case C_CM_MDSR:
1138 info->icount.dsr++;
1139 delta_count++;
1140 break;
1141 #ifdef Z_WAKE
1142 case C_CM_IOCTLW:
1143 complete(&info->shutdown_wait);
1144 break;
1145 #endif
1146 #ifdef CONFIG_CYZ_INTR
1147 case C_CM_RXHIWM:
1148 case C_CM_RXNNDT:
1149 case C_CM_INTBACK2:
1150 /* Reception Interrupt */
1151 #ifdef CY_DEBUG_INTERRUPTS
1152 printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
1153 "port %ld\n", info->card, channel);
1154 #endif
1155 cyz_handle_rx(info);
1156 break;
1157 case C_CM_TXBEMPTY:
1158 case C_CM_TXLOWWM:
1159 case C_CM_INTBACK:
1160 /* Transmission Interrupt */
1161 #ifdef CY_DEBUG_INTERRUPTS
1162 printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
1163 "port %ld\n", info->card, channel);
1164 #endif
1165 cyz_handle_tx(info);
1166 break;
1167 #endif /* CONFIG_CYZ_INTR */
1168 case C_CM_FATAL:
1169 /* should do something with this !!! */
1170 break;
1171 default:
1172 break;
1173 }
1174 if (delta_count)
1175 wake_up_interruptible(&info->port.delta_msr_wait);
1176 if (special_count)
1177 tty_schedule_flip(&info->port);
1178 }
1179 }
1180
1181 #ifdef CONFIG_CYZ_INTR
1182 static irqreturn_t cyz_interrupt(int irq, void *dev_id)
1183 {
1184 struct cyclades_card *cinfo = dev_id;
1185
1186 if (unlikely(!cyz_is_loaded(cinfo))) {
1187 #ifdef CY_DEBUG_INTERRUPTS
1188 printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
1189 "(IRQ%d).\n", irq);
1190 #endif
1191 return IRQ_NONE;
1192 }
1193
1194 /* Handle the interrupts */
1195 cyz_handle_cmd(cinfo);
1196
1197 return IRQ_HANDLED;
1198 } /* cyz_interrupt */
1199
1200 static void cyz_rx_restart(unsigned long arg)
1201 {
1202 struct cyclades_port *info = (struct cyclades_port *)arg;
1203 struct cyclades_card *card = info->card;
1204 int retval;
1205 __u32 channel = info->line - card->first_line;
1206 unsigned long flags;
1207
1208 spin_lock_irqsave(&card->card_lock, flags);
1209 retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L);
1210 if (retval != 0) {
1211 printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n",
1212 info->line, retval);
1213 }
1214 spin_unlock_irqrestore(&card->card_lock, flags);
1215 }
1216
1217 #else /* CONFIG_CYZ_INTR */
1218
1219 static void cyz_poll(unsigned long arg)
1220 {
1221 struct cyclades_card *cinfo;
1222 struct cyclades_port *info;
1223 unsigned long expires = jiffies + HZ;
1224 unsigned int port, card;
1225
1226 for (card = 0; card < NR_CARDS; card++) {
1227 cinfo = &cy_card[card];
1228
1229 if (!cy_is_Z(cinfo))
1230 continue;
1231 if (!cyz_is_loaded(cinfo))
1232 continue;
1233
1234 /* Skip first polling cycle to avoid racing conditions with the FW */
1235 if (!cinfo->intr_enabled) {
1236 cinfo->intr_enabled = 1;
1237 continue;
1238 }
1239
1240 cyz_handle_cmd(cinfo);
1241
1242 for (port = 0; port < cinfo->nports; port++) {
1243 info = &cinfo->ports[port];
1244
1245 if (!info->throttle)
1246 cyz_handle_rx(info);
1247 cyz_handle_tx(info);
1248 }
1249 /* poll every 'cyz_polling_cycle' period */
1250 expires = jiffies + cyz_polling_cycle;
1251 }
1252 mod_timer(&cyz_timerlist, expires);
1253 } /* cyz_poll */
1254
1255 #endif /* CONFIG_CYZ_INTR */
1256
1257 /********** End of block of Cyclades-Z specific code *********/
1258 /***********************************************************/
1259
1260 /* This is called whenever a port becomes active;
1261 interrupts are enabled and DTR & RTS are turned on.
1262 */
1263 static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
1264 {
1265 struct cyclades_card *card;
1266 unsigned long flags;
1267 int retval = 0;
1268 int channel;
1269 unsigned long page;
1270
1271 card = info->card;
1272 channel = info->line - card->first_line;
1273
1274 page = get_zeroed_page(GFP_KERNEL);
1275 if (!page)
1276 return -ENOMEM;
1277
1278 spin_lock_irqsave(&card->card_lock, flags);
1279
1280 if (tty_port_initialized(&info->port))
1281 goto errout;
1282
1283 if (!info->type) {
1284 set_bit(TTY_IO_ERROR, &tty->flags);
1285 goto errout;
1286 }
1287
1288 if (info->port.xmit_buf)
1289 free_page(page);
1290 else
1291 info->port.xmit_buf = (unsigned char *)page;
1292
1293 spin_unlock_irqrestore(&card->card_lock, flags);
1294
1295 cy_set_line_char(info, tty);
1296
1297 if (!cy_is_Z(card)) {
1298 channel &= 0x03;
1299
1300 spin_lock_irqsave(&card->card_lock, flags);
1301
1302 cyy_writeb(info, CyCAR, channel);
1303
1304 cyy_writeb(info, CyRTPR,
1305 (info->default_timeout ? info->default_timeout : 0x02));
1306 /* 10ms rx timeout */
1307
1308 cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
1309
1310 cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
1311
1312 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
1313 } else {
1314 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
1315
1316 if (!cyz_is_loaded(card))
1317 return -ENODEV;
1318
1319 #ifdef CY_DEBUG_OPEN
1320 printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
1321 "base_addr %p\n", card, channel, card->base_addr);
1322 #endif
1323 spin_lock_irqsave(&card->card_lock, flags);
1324
1325 cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
1326 #ifdef Z_WAKE
1327 #ifdef CONFIG_CYZ_INTR
1328 cy_writel(&ch_ctrl->intr_enable,
1329 C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1330 C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
1331 #else
1332 cy_writel(&ch_ctrl->intr_enable,
1333 C_IN_IOCTLW | C_IN_MDCD);
1334 #endif /* CONFIG_CYZ_INTR */
1335 #else
1336 #ifdef CONFIG_CYZ_INTR
1337 cy_writel(&ch_ctrl->intr_enable,
1338 C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1339 C_IN_RXNNDT | C_IN_MDCD);
1340 #else
1341 cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
1342 #endif /* CONFIG_CYZ_INTR */
1343 #endif /* Z_WAKE */
1344
1345 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
1346 if (retval != 0) {
1347 printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was "
1348 "%x\n", info->line, retval);
1349 }
1350
1351 /* Flush RX buffers before raising DTR and RTS */
1352 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L);
1353 if (retval != 0) {
1354 printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was "
1355 "%x\n", info->line, retval);
1356 }
1357
1358 /* set timeout !!! */
1359 /* set RTS and DTR !!! */
1360 tty_port_raise_dtr_rts(&info->port);
1361
1362 /* enable send, recv, modem !!! */
1363 }
1364
1365 tty_port_set_initialized(&info->port, 1);
1366
1367 clear_bit(TTY_IO_ERROR, &tty->flags);
1368 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1369 info->breakon = info->breakoff = 0;
1370 memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
1371 info->idle_stats.in_use =
1372 info->idle_stats.recv_idle =
1373 info->idle_stats.xmit_idle = jiffies;
1374
1375 spin_unlock_irqrestore(&card->card_lock, flags);
1376
1377 #ifdef CY_DEBUG_OPEN
1378 printk(KERN_DEBUG "cyc startup done\n");
1379 #endif
1380 return 0;
1381
1382 errout:
1383 spin_unlock_irqrestore(&card->card_lock, flags);
1384 free_page(page);
1385 return retval;
1386 } /* startup */
1387
1388 static void start_xmit(struct cyclades_port *info)
1389 {
1390 struct cyclades_card *card = info->card;
1391 unsigned long flags;
1392 int channel = info->line - card->first_line;
1393
1394 if (!cy_is_Z(card)) {
1395 spin_lock_irqsave(&card->card_lock, flags);
1396 cyy_writeb(info, CyCAR, channel & 0x03);
1397 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
1398 spin_unlock_irqrestore(&card->card_lock, flags);
1399 } else {
1400 #ifdef CONFIG_CYZ_INTR
1401 int retval;
1402
1403 spin_lock_irqsave(&card->card_lock, flags);
1404 retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L);
1405 if (retval != 0) {
1406 printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was "
1407 "%x\n", info->line, retval);
1408 }
1409 spin_unlock_irqrestore(&card->card_lock, flags);
1410 #else /* CONFIG_CYZ_INTR */
1411 /* Don't have to do anything at this time */
1412 #endif /* CONFIG_CYZ_INTR */
1413 }
1414 } /* start_xmit */
1415
1416 /*
1417 * This routine shuts down a serial port; interrupts are disabled,
1418 * and DTR is dropped if the hangup on close termio flag is on.
1419 */
1420 static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
1421 {
1422 struct cyclades_card *card;
1423 unsigned long flags;
1424
1425 if (!tty_port_initialized(&info->port))
1426 return;
1427
1428 card = info->card;
1429 if (!cy_is_Z(card)) {
1430 spin_lock_irqsave(&card->card_lock, flags);
1431
1432 /* Clear delta_msr_wait queue to avoid mem leaks. */
1433 wake_up_interruptible(&info->port.delta_msr_wait);
1434
1435 if (info->port.xmit_buf) {
1436 unsigned char *temp;
1437 temp = info->port.xmit_buf;
1438 info->port.xmit_buf = NULL;
1439 free_page((unsigned long)temp);
1440 }
1441 if (C_HUPCL(tty))
1442 cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
1443
1444 cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
1445 /* it may be appropriate to clear _XMIT at
1446 some later date (after testing)!!! */
1447
1448 set_bit(TTY_IO_ERROR, &tty->flags);
1449 tty_port_set_initialized(&info->port, 0);
1450 spin_unlock_irqrestore(&card->card_lock, flags);
1451 } else {
1452 #ifdef CY_DEBUG_OPEN
1453 int channel = info->line - card->first_line;
1454 printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
1455 "base_addr %p\n", card, channel, card->base_addr);
1456 #endif
1457
1458 if (!cyz_is_loaded(card))
1459 return;
1460
1461 spin_lock_irqsave(&card->card_lock, flags);
1462
1463 if (info->port.xmit_buf) {
1464 unsigned char *temp;
1465 temp = info->port.xmit_buf;
1466 info->port.xmit_buf = NULL;
1467 free_page((unsigned long)temp);
1468 }
1469
1470 if (C_HUPCL(tty))
1471 tty_port_lower_dtr_rts(&info->port);
1472
1473 set_bit(TTY_IO_ERROR, &tty->flags);
1474 tty_port_set_initialized(&info->port, 0);
1475
1476 spin_unlock_irqrestore(&card->card_lock, flags);
1477 }
1478
1479 #ifdef CY_DEBUG_OPEN
1480 printk(KERN_DEBUG "cyc shutdown done\n");
1481 #endif
1482 } /* shutdown */
1483
1484 /*
1485 * ------------------------------------------------------------
1486 * cy_open() and friends
1487 * ------------------------------------------------------------
1488 */
1489
1490 /*
1491 * This routine is called whenever a serial port is opened. It
1492 * performs the serial-specific initialization for the tty structure.
1493 */
1494 static int cy_open(struct tty_struct *tty, struct file *filp)
1495 {
1496 struct cyclades_port *info;
1497 unsigned int i, line = tty->index;
1498 int retval;
1499
1500 for (i = 0; i < NR_CARDS; i++)
1501 if (line < cy_card[i].first_line + cy_card[i].nports &&
1502 line >= cy_card[i].first_line)
1503 break;
1504 if (i >= NR_CARDS)
1505 return -ENODEV;
1506 info = &cy_card[i].ports[line - cy_card[i].first_line];
1507 if (info->line < 0)
1508 return -ENODEV;
1509
1510 /* If the card's firmware hasn't been loaded,
1511 treat it as absent from the system. This
1512 will make the user pay attention.
1513 */
1514 if (cy_is_Z(info->card)) {
1515 struct cyclades_card *cinfo = info->card;
1516 struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
1517
1518 if (!cyz_is_loaded(cinfo)) {
1519 if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
1520 readl(&firm_id->signature) ==
1521 ZFIRM_HLT) {
1522 printk(KERN_ERR "cyc:Cyclades-Z Error: you "
1523 "need an external power supply for "
1524 "this number of ports.\nFirmware "
1525 "halted.\n");
1526 } else {
1527 printk(KERN_ERR "cyc:Cyclades-Z firmware not "
1528 "yet loaded\n");
1529 }
1530 return -ENODEV;
1531 }
1532 #ifdef CONFIG_CYZ_INTR
1533 else {
1534 /* In case this Z board is operating in interrupt mode, its
1535 interrupts should be enabled as soon as the first open
1536 happens to one of its ports. */
1537 if (!cinfo->intr_enabled) {
1538 u16 intr;
1539
1540 /* Enable interrupts on the PLX chip */
1541 intr = readw(&cinfo->ctl_addr.p9060->
1542 intr_ctrl_stat) | 0x0900;
1543 cy_writew(&cinfo->ctl_addr.p9060->
1544 intr_ctrl_stat, intr);
1545 /* Enable interrupts on the FW */
1546 retval = cyz_issue_cmd(cinfo, 0,
1547 C_CM_IRQ_ENBL, 0L);
1548 if (retval != 0) {
1549 printk(KERN_ERR "cyc:IRQ enable retval "
1550 "was %x\n", retval);
1551 }
1552 cinfo->intr_enabled = 1;
1553 }
1554 }
1555 #endif /* CONFIG_CYZ_INTR */
1556 /* Make sure this Z port really exists in hardware */
1557 if (info->line > (cinfo->first_line + cinfo->nports - 1))
1558 return -ENODEV;
1559 }
1560 #ifdef CY_DEBUG_OTHER
1561 printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
1562 #endif
1563 tty->driver_data = info;
1564 if (serial_paranoia_check(info, tty->name, "cy_open"))
1565 return -ENODEV;
1566
1567 #ifdef CY_DEBUG_OPEN
1568 printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
1569 info->port.count);
1570 #endif
1571 info->port.count++;
1572 #ifdef CY_DEBUG_COUNT
1573 printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
1574 current->pid, info->port.count);
1575 #endif
1576
1577 /*
1578 * Start up serial port
1579 */
1580 retval = cy_startup(info, tty);
1581 if (retval)
1582 return retval;
1583
1584 retval = tty_port_block_til_ready(&info->port, tty, filp);
1585 if (retval) {
1586 #ifdef CY_DEBUG_OPEN
1587 printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
1588 "with %d\n", retval);
1589 #endif
1590 return retval;
1591 }
1592
1593 info->throttle = 0;
1594 tty_port_tty_set(&info->port, tty);
1595
1596 #ifdef CY_DEBUG_OPEN
1597 printk(KERN_DEBUG "cyc:cy_open done\n");
1598 #endif
1599 return 0;
1600 } /* cy_open */
1601
1602 /*
1603 * cy_wait_until_sent() --- wait until the transmitter is empty
1604 */
1605 static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
1606 {
1607 struct cyclades_card *card;
1608 struct cyclades_port *info = tty->driver_data;
1609 unsigned long orig_jiffies;
1610 int char_time;
1611
1612 if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
1613 return;
1614
1615 if (info->xmit_fifo_size == 0)
1616 return; /* Just in case.... */
1617
1618 orig_jiffies = jiffies;
1619 /*
1620 * Set the check interval to be 1/5 of the estimated time to
1621 * send a single character, and make it at least 1. The check
1622 * interval should also be less than the timeout.
1623 *
1624 * Note: we have to use pretty tight timings here to satisfy
1625 * the NIST-PCTS.
1626 */
1627 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
1628 char_time = char_time / 5;
1629 if (char_time <= 0)
1630 char_time = 1;
1631 if (timeout < 0)
1632 timeout = 0;
1633 if (timeout)
1634 char_time = min(char_time, timeout);
1635 /*
1636 * If the transmitter hasn't cleared in twice the approximate
1637 * amount of time to send the entire FIFO, it probably won't
1638 * ever clear. This assumes the UART isn't doing flow
1639 * control, which is currently the case. Hence, if it ever
1640 * takes longer than info->timeout, this is probably due to a
1641 * UART bug of some kind. So, we clamp the timeout parameter at
1642 * 2*info->timeout.
1643 */
1644 if (!timeout || timeout > 2 * info->timeout)
1645 timeout = 2 * info->timeout;
1646
1647 card = info->card;
1648 if (!cy_is_Z(card)) {
1649 while (cyy_readb(info, CySRER) & CyTxRdy) {
1650 if (msleep_interruptible(jiffies_to_msecs(char_time)))
1651 break;
1652 if (timeout && time_after(jiffies, orig_jiffies +
1653 timeout))
1654 break;
1655 }
1656 }
1657 /* Run one more char cycle */
1658 msleep_interruptible(jiffies_to_msecs(char_time * 5));
1659 }
1660
1661 static void cy_flush_buffer(struct tty_struct *tty)
1662 {
1663 struct cyclades_port *info = tty->driver_data;
1664 struct cyclades_card *card;
1665 int channel, retval;
1666 unsigned long flags;
1667
1668 #ifdef CY_DEBUG_IO
1669 printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
1670 #endif
1671
1672 if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
1673 return;
1674
1675 card = info->card;
1676 channel = info->line - card->first_line;
1677
1678 spin_lock_irqsave(&card->card_lock, flags);
1679 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1680 spin_unlock_irqrestore(&card->card_lock, flags);
1681
1682 if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board
1683 buffers as well */
1684 spin_lock_irqsave(&card->card_lock, flags);
1685 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
1686 if (retval != 0) {
1687 printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
1688 "was %x\n", info->line, retval);
1689 }
1690 spin_unlock_irqrestore(&card->card_lock, flags);
1691 }
1692 tty_wakeup(tty);
1693 } /* cy_flush_buffer */
1694
1695
1696 static void cy_do_close(struct tty_port *port)
1697 {
1698 struct cyclades_port *info = container_of(port, struct cyclades_port,
1699 port);
1700 struct cyclades_card *card;
1701 unsigned long flags;
1702 int channel;
1703
1704 card = info->card;
1705 channel = info->line - card->first_line;
1706 spin_lock_irqsave(&card->card_lock, flags);
1707
1708 if (!cy_is_Z(card)) {
1709 /* Stop accepting input */
1710 cyy_writeb(info, CyCAR, channel & 0x03);
1711 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
1712 if (tty_port_initialized(&info->port)) {
1713 /* Waiting for on-board buffers to be empty before
1714 closing the port */
1715 spin_unlock_irqrestore(&card->card_lock, flags);
1716 cy_wait_until_sent(port->tty, info->timeout);
1717 spin_lock_irqsave(&card->card_lock, flags);
1718 }
1719 } else {
1720 #ifdef Z_WAKE
1721 /* Waiting for on-board buffers to be empty before closing
1722 the port */
1723 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
1724 int retval;
1725
1726 if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
1727 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
1728 if (retval != 0) {
1729 printk(KERN_DEBUG "cyc:cy_close retval on "
1730 "ttyC%d was %x\n", info->line, retval);
1731 }
1732 spin_unlock_irqrestore(&card->card_lock, flags);
1733 wait_for_completion_interruptible(&info->shutdown_wait);
1734 spin_lock_irqsave(&card->card_lock, flags);
1735 }
1736 #endif
1737 }
1738 spin_unlock_irqrestore(&card->card_lock, flags);
1739 cy_shutdown(info, port->tty);
1740 }
1741
1742 /*
1743 * This routine is called when a particular tty device is closed.
1744 */
1745 static void cy_close(struct tty_struct *tty, struct file *filp)
1746 {
1747 struct cyclades_port *info = tty->driver_data;
1748 if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
1749 return;
1750 tty_port_close(&info->port, tty, filp);
1751 } /* cy_close */
1752
1753 /* This routine gets called when tty_write has put something into
1754 * the write_queue. The characters may come from user space or
1755 * kernel space.
1756 *
1757 * This routine will return the number of characters actually
1758 * accepted for writing.
1759 *
1760 * If the port is not already transmitting stuff, start it off by
1761 * enabling interrupts. The interrupt service routine will then
1762 * ensure that the characters are sent.
1763 * If the port is already active, there is no need to kick it.
1764 *
1765 */
1766 static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
1767 {
1768 struct cyclades_port *info = tty->driver_data;
1769 unsigned long flags;
1770 int c, ret = 0;
1771
1772 #ifdef CY_DEBUG_IO
1773 printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
1774 #endif
1775
1776 if (serial_paranoia_check(info, tty->name, "cy_write"))
1777 return 0;
1778
1779 if (!info->port.xmit_buf)
1780 return 0;
1781
1782 spin_lock_irqsave(&info->card->card_lock, flags);
1783 while (1) {
1784 c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1));
1785 c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head));
1786
1787 if (c <= 0)
1788 break;
1789
1790 memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
1791 info->xmit_head = (info->xmit_head + c) &
1792 (SERIAL_XMIT_SIZE - 1);
1793 info->xmit_cnt += c;
1794 buf += c;
1795 count -= c;
1796 ret += c;
1797 }
1798 spin_unlock_irqrestore(&info->card->card_lock, flags);
1799
1800 info->idle_stats.xmit_bytes += ret;
1801 info->idle_stats.xmit_idle = jiffies;
1802
1803 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1804 start_xmit(info);
1805
1806 return ret;
1807 } /* cy_write */
1808
1809 /*
1810 * This routine is called by the kernel to write a single
1811 * character to the tty device. If the kernel uses this routine,
1812 * it must call the flush_chars() routine (if defined) when it is
1813 * done stuffing characters into the driver. If there is no room
1814 * in the queue, the character is ignored.
1815 */
1816 static int cy_put_char(struct tty_struct *tty, unsigned char ch)
1817 {
1818 struct cyclades_port *info = tty->driver_data;
1819 unsigned long flags;
1820
1821 #ifdef CY_DEBUG_IO
1822 printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line);
1823 #endif
1824
1825 if (serial_paranoia_check(info, tty->name, "cy_put_char"))
1826 return 0;
1827
1828 if (!info->port.xmit_buf)
1829 return 0;
1830
1831 spin_lock_irqsave(&info->card->card_lock, flags);
1832 if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
1833 spin_unlock_irqrestore(&info->card->card_lock, flags);
1834 return 0;
1835 }
1836
1837 info->port.xmit_buf[info->xmit_head++] = ch;
1838 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1839 info->xmit_cnt++;
1840 info->idle_stats.xmit_bytes++;
1841 info->idle_stats.xmit_idle = jiffies;
1842 spin_unlock_irqrestore(&info->card->card_lock, flags);
1843 return 1;
1844 } /* cy_put_char */
1845
1846 /*
1847 * This routine is called by the kernel after it has written a
1848 * series of characters to the tty device using put_char().
1849 */
1850 static void cy_flush_chars(struct tty_struct *tty)
1851 {
1852 struct cyclades_port *info = tty->driver_data;
1853
1854 #ifdef CY_DEBUG_IO
1855 printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line);
1856 #endif
1857
1858 if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
1859 return;
1860
1861 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1862 !info->port.xmit_buf)
1863 return;
1864
1865 start_xmit(info);
1866 } /* cy_flush_chars */
1867
1868 /*
1869 * This routine returns the numbers of characters the tty driver
1870 * will accept for queuing to be written. This number is subject
1871 * to change as output buffers get emptied, or if the output flow
1872 * control is activated.
1873 */
1874 static int cy_write_room(struct tty_struct *tty)
1875 {
1876 struct cyclades_port *info = tty->driver_data;
1877 int ret;
1878
1879 #ifdef CY_DEBUG_IO
1880 printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line);
1881 #endif
1882
1883 if (serial_paranoia_check(info, tty->name, "cy_write_room"))
1884 return 0;
1885 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
1886 if (ret < 0)
1887 ret = 0;
1888 return ret;
1889 } /* cy_write_room */
1890
1891 static int cy_chars_in_buffer(struct tty_struct *tty)
1892 {
1893 struct cyclades_port *info = tty->driver_data;
1894
1895 if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
1896 return 0;
1897
1898 #ifdef Z_EXT_CHARS_IN_BUFFER
1899 if (!cy_is_Z(info->card)) {
1900 #endif /* Z_EXT_CHARS_IN_BUFFER */
1901 #ifdef CY_DEBUG_IO
1902 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
1903 info->line, info->xmit_cnt);
1904 #endif
1905 return info->xmit_cnt;
1906 #ifdef Z_EXT_CHARS_IN_BUFFER
1907 } else {
1908 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
1909 int char_count;
1910 __u32 tx_put, tx_get, tx_bufsize;
1911
1912 tx_get = readl(&buf_ctrl->tx_get);
1913 tx_put = readl(&buf_ctrl->tx_put);
1914 tx_bufsize = readl(&buf_ctrl->tx_bufsize);
1915 if (tx_put >= tx_get)
1916 char_count = tx_put - tx_get;
1917 else
1918 char_count = tx_put - tx_get + tx_bufsize;
1919 #ifdef CY_DEBUG_IO
1920 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
1921 info->line, info->xmit_cnt + char_count);
1922 #endif
1923 return info->xmit_cnt + char_count;
1924 }
1925 #endif /* Z_EXT_CHARS_IN_BUFFER */
1926 } /* cy_chars_in_buffer */
1927
1928 /*
1929 * ------------------------------------------------------------
1930 * cy_ioctl() and friends
1931 * ------------------------------------------------------------
1932 */
1933
1934 static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
1935 {
1936 int co, co_val, bpr;
1937 __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
1938 25000000);
1939
1940 if (baud == 0) {
1941 info->tbpr = info->tco = info->rbpr = info->rco = 0;
1942 return;
1943 }
1944
1945 /* determine which prescaler to use */
1946 for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
1947 if (cy_clock / co_val / baud > 63)
1948 break;
1949 }
1950
1951 bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
1952 if (bpr > 255)
1953 bpr = 255;
1954
1955 info->tbpr = info->rbpr = bpr;
1956 info->tco = info->rco = co;
1957 }
1958
1959 /*
1960 * This routine finds or computes the various line characteristics.
1961 * It used to be called config_setup
1962 */
1963 static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
1964 {
1965 struct cyclades_card *card;
1966 unsigned long flags;
1967 int channel;
1968 unsigned cflag, iflag;
1969 int baud, baud_rate = 0;
1970 int i;
1971
1972 if (info->line == -1)
1973 return;
1974
1975 cflag = tty->termios.c_cflag;
1976 iflag = tty->termios.c_iflag;
1977
1978 /*
1979 * Set up the tty->alt_speed kludge
1980 */
1981 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1982 tty->alt_speed = 57600;
1983 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1984 tty->alt_speed = 115200;
1985 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1986 tty->alt_speed = 230400;
1987 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1988 tty->alt_speed = 460800;
1989
1990 card = info->card;
1991 channel = info->line - card->first_line;
1992
1993 if (!cy_is_Z(card)) {
1994 u32 cflags;
1995
1996 /* baud rate */
1997 baud = tty_get_baud_rate(tty);
1998 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
1999 ASYNC_SPD_CUST) {
2000 if (info->custom_divisor)
2001 baud_rate = info->baud / info->custom_divisor;
2002 else
2003 baud_rate = info->baud;
2004 } else if (baud > CD1400_MAX_SPEED) {
2005 baud = CD1400_MAX_SPEED;
2006 }
2007 /* find the baud index */
2008 for (i = 0; i < 20; i++) {
2009 if (baud == baud_table[i])
2010 break;
2011 }
2012 if (i == 20)
2013 i = 19; /* CD1400_MAX_SPEED */
2014
2015 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2016 ASYNC_SPD_CUST) {
2017 cyy_baud_calc(info, baud_rate);
2018 } else {
2019 if (info->chip_rev >= CD1400_REV_J) {
2020 /* It is a CD1400 rev. J or later */
2021 info->tbpr = baud_bpr_60[i]; /* Tx BPR */
2022 info->tco = baud_co_60[i]; /* Tx CO */
2023 info->rbpr = baud_bpr_60[i]; /* Rx BPR */
2024 info->rco = baud_co_60[i]; /* Rx CO */
2025 } else {
2026 info->tbpr = baud_bpr_25[i]; /* Tx BPR */
2027 info->tco = baud_co_25[i]; /* Tx CO */
2028 info->rbpr = baud_bpr_25[i]; /* Rx BPR */
2029 info->rco = baud_co_25[i]; /* Rx CO */
2030 }
2031 }
2032 if (baud_table[i] == 134) {
2033 /* get it right for 134.5 baud */
2034 info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2035 2;
2036 } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2037 ASYNC_SPD_CUST) {
2038 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2039 baud_rate) + 2;
2040 } else if (baud_table[i]) {
2041 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2042 baud_table[i]) + 2;
2043 /* this needs to be propagated into the card info */
2044 } else {
2045 info->timeout = 0;
2046 }
2047 /* By tradition (is it a standard?) a baud rate of zero
2048 implies the line should be/has been closed. A bit
2049 later in this routine such a test is performed. */
2050
2051 /* byte size and parity */
2052 info->cor5 = 0;
2053 info->cor4 = 0;
2054 /* receive threshold */
2055 info->cor3 = (info->default_threshold ?
2056 info->default_threshold : baud_cor3[i]);
2057 info->cor2 = CyETC;
2058 switch (cflag & CSIZE) {
2059 case CS5:
2060 info->cor1 = Cy_5_BITS;
2061 break;
2062 case CS6:
2063 info->cor1 = Cy_6_BITS;
2064 break;
2065 case CS7:
2066 info->cor1 = Cy_7_BITS;
2067 break;
2068 case CS8:
2069 info->cor1 = Cy_8_BITS;
2070 break;
2071 }
2072 if (cflag & CSTOPB)
2073 info->cor1 |= Cy_2_STOP;
2074
2075 if (cflag & PARENB) {
2076 if (cflag & PARODD)
2077 info->cor1 |= CyPARITY_O;
2078 else
2079 info->cor1 |= CyPARITY_E;
2080 } else
2081 info->cor1 |= CyPARITY_NONE;
2082
2083 /* CTS flow control flag */
2084 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
2085 if (cflag & CRTSCTS)
2086 info->cor2 |= CyCtsAE;
2087 else
2088 info->cor2 &= ~CyCtsAE;
2089 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
2090
2091 /***********************************************
2092 The hardware option, CyRtsAO, presents RTS when
2093 the chip has characters to send. Since most modems
2094 use RTS as reverse (inbound) flow control, this
2095 option is not used. If inbound flow control is
2096 necessary, DTR can be programmed to provide the
2097 appropriate signals for use with a non-standard
2098 cable. Contact Marcio Saito for details.
2099 ***********************************************/
2100
2101 channel &= 0x03;
2102
2103 spin_lock_irqsave(&card->card_lock, flags);
2104 cyy_writeb(info, CyCAR, channel);
2105
2106 /* tx and rx baud rate */
2107
2108 cyy_writeb(info, CyTCOR, info->tco);
2109 cyy_writeb(info, CyTBPR, info->tbpr);
2110 cyy_writeb(info, CyRCOR, info->rco);
2111 cyy_writeb(info, CyRBPR, info->rbpr);
2112
2113 /* set line characteristics according configuration */
2114
2115 cyy_writeb(info, CySCHR1, START_CHAR(tty));
2116 cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
2117 cyy_writeb(info, CyCOR1, info->cor1);
2118 cyy_writeb(info, CyCOR2, info->cor2);
2119 cyy_writeb(info, CyCOR3, info->cor3);
2120 cyy_writeb(info, CyCOR4, info->cor4);
2121 cyy_writeb(info, CyCOR5, info->cor5);
2122
2123 cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
2124 CyCOR3ch);
2125
2126 /* !!! Is this needed? */
2127 cyy_writeb(info, CyCAR, channel);
2128 cyy_writeb(info, CyRTPR,
2129 (info->default_timeout ? info->default_timeout : 0x02));
2130 /* 10ms rx timeout */
2131
2132 cflags = CyCTS;
2133 if (!C_CLOCAL(tty))
2134 cflags |= CyDSR | CyRI | CyDCD;
2135 /* without modem intr */
2136 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
2137 /* act on 1->0 modem transitions */
2138 if ((cflag & CRTSCTS) && info->rflow)
2139 cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
2140 else
2141 cyy_writeb(info, CyMCOR1, cflags);
2142 /* act on 0->1 modem transitions */
2143 cyy_writeb(info, CyMCOR2, cflags);
2144
2145 if (i == 0) /* baud rate is zero, turn off line */
2146 cyy_change_rts_dtr(info, 0, TIOCM_DTR);
2147 else
2148 cyy_change_rts_dtr(info, TIOCM_DTR, 0);
2149
2150 clear_bit(TTY_IO_ERROR, &tty->flags);
2151 spin_unlock_irqrestore(&card->card_lock, flags);
2152
2153 } else {
2154 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
2155 __u32 sw_flow;
2156 int retval;
2157
2158 if (!cyz_is_loaded(card))
2159 return;
2160
2161 /* baud rate */
2162 baud = tty_get_baud_rate(tty);
2163 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2164 ASYNC_SPD_CUST) {
2165 if (info->custom_divisor)
2166 baud_rate = info->baud / info->custom_divisor;
2167 else
2168 baud_rate = info->baud;
2169 } else if (baud > CYZ_MAX_SPEED) {
2170 baud = CYZ_MAX_SPEED;
2171 }
2172 cy_writel(&ch_ctrl->comm_baud, baud);
2173
2174 if (baud == 134) {
2175 /* get it right for 134.5 baud */
2176 info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2177 2;
2178 } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2179 ASYNC_SPD_CUST) {
2180 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2181 baud_rate) + 2;
2182 } else if (baud) {
2183 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2184 baud) + 2;
2185 /* this needs to be propagated into the card info */
2186 } else {
2187 info->timeout = 0;
2188 }
2189
2190 /* byte size and parity */
2191 switch (cflag & CSIZE) {
2192 case CS5:
2193 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5);
2194 break;
2195 case CS6:
2196 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6);
2197 break;
2198 case CS7:
2199 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7);
2200 break;
2201 case CS8:
2202 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8);
2203 break;
2204 }
2205 if (cflag & CSTOPB) {
2206 cy_writel(&ch_ctrl->comm_data_l,
2207 readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
2208 } else {
2209 cy_writel(&ch_ctrl->comm_data_l,
2210 readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
2211 }
2212 if (cflag & PARENB) {
2213 if (cflag & PARODD)
2214 cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
2215 else
2216 cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
2217 } else
2218 cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
2219
2220 /* CTS flow control flag */
2221 if (cflag & CRTSCTS) {
2222 cy_writel(&ch_ctrl->hw_flow,
2223 readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
2224 } else {
2225 cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) &
2226 ~(C_RS_CTS | C_RS_RTS));
2227 }
2228 /* As the HW flow control is done in firmware, the driver
2229 doesn't need to care about it */
2230 tty_port_set_cts_flow(&info->port, 0);
2231
2232 /* XON/XOFF/XANY flow control flags */
2233 sw_flow = 0;
2234 if (iflag & IXON) {
2235 sw_flow |= C_FL_OXX;
2236 if (iflag & IXANY)
2237 sw_flow |= C_FL_OIXANY;
2238 }
2239 cy_writel(&ch_ctrl->sw_flow, sw_flow);
2240
2241 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
2242 if (retval != 0) {
2243 printk(KERN_ERR "cyc:set_line_char retval on ttyC%d "
2244 "was %x\n", info->line, retval);
2245 }
2246
2247 /* CD sensitivity */
2248 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
2249
2250 if (baud == 0) { /* baud rate is zero, turn off line */
2251 cy_writel(&ch_ctrl->rs_control,
2252 readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
2253 #ifdef CY_DEBUG_DTR
2254 printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n");
2255 #endif
2256 } else {
2257 cy_writel(&ch_ctrl->rs_control,
2258 readl(&ch_ctrl->rs_control) | C_RS_DTR);
2259 #ifdef CY_DEBUG_DTR
2260 printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n");
2261 #endif
2262 }
2263
2264 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
2265 if (retval != 0) {
2266 printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
2267 "was %x\n", info->line, retval);
2268 }
2269
2270 clear_bit(TTY_IO_ERROR, &tty->flags);
2271 }
2272 } /* set_line_char */
2273
2274 static int cy_get_serial_info(struct cyclades_port *info,
2275 struct serial_struct __user *retinfo)
2276 {
2277 struct cyclades_card *cinfo = info->card;
2278 struct serial_struct tmp = {
2279 .type = info->type,
2280 .line = info->line,
2281 .port = (info->card - cy_card) * 0x100 + info->line -
2282 cinfo->first_line,
2283 .irq = cinfo->irq,
2284 .flags = info->port.flags,
2285 .close_delay = info->port.close_delay,
2286 .closing_wait = info->port.closing_wait,
2287 .baud_base = info->baud,
2288 .custom_divisor = info->custom_divisor,
2289 };
2290 return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2291 }
2292
2293 static int
2294 cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
2295 struct serial_struct __user *new_info)
2296 {
2297 struct serial_struct new_serial;
2298 int ret;
2299
2300 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2301 return -EFAULT;
2302
2303 mutex_lock(&info->port.mutex);
2304 if (!capable(CAP_SYS_ADMIN)) {
2305 if (new_serial.close_delay != info->port.close_delay ||
2306 new_serial.baud_base != info->baud ||
2307 (new_serial.flags & ASYNC_FLAGS &
2308 ~ASYNC_USR_MASK) !=
2309 (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
2310 {
2311 mutex_unlock(&info->port.mutex);
2312 return -EPERM;
2313 }
2314 info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
2315 (new_serial.flags & ASYNC_USR_MASK);
2316 info->baud = new_serial.baud_base;
2317 info->custom_divisor = new_serial.custom_divisor;
2318 goto check_and_exit;
2319 }
2320
2321 /*
2322 * OK, past this point, all the error checking has been done.
2323 * At this point, we start making changes.....
2324 */
2325
2326 info->baud = new_serial.baud_base;
2327 info->custom_divisor = new_serial.custom_divisor;
2328 info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
2329 (new_serial.flags & ASYNC_FLAGS);
2330 info->port.close_delay = new_serial.close_delay * HZ / 100;
2331 info->port.closing_wait = new_serial.closing_wait * HZ / 100;
2332
2333 check_and_exit:
2334 if (tty_port_initialized(&info->port)) {
2335 cy_set_line_char(info, tty);
2336 ret = 0;
2337 } else {
2338 ret = cy_startup(info, tty);
2339 }
2340 mutex_unlock(&info->port.mutex);
2341 return ret;
2342 } /* set_serial_info */
2343
2344 /*
2345 * get_lsr_info - get line status register info
2346 *
2347 * Purpose: Let user call ioctl() to get info when the UART physically
2348 * is emptied. On bus types like RS485, the transmitter must
2349 * release the bus after transmitting. This must be done when
2350 * the transmit shift register is empty, not be done when the
2351 * transmit holding register is empty. This functionality
2352 * allows an RS485 driver to be written in user space.
2353 */
2354 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
2355 {
2356 struct cyclades_card *card = info->card;
2357 unsigned int result;
2358 unsigned long flags;
2359 u8 status;
2360
2361 if (!cy_is_Z(card)) {
2362 spin_lock_irqsave(&card->card_lock, flags);
2363 status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
2364 spin_unlock_irqrestore(&card->card_lock, flags);
2365 result = (status ? 0 : TIOCSER_TEMT);
2366 } else {
2367 /* Not supported yet */
2368 return -EINVAL;
2369 }
2370 return put_user(result, value);
2371 }
2372
2373 static int cy_tiocmget(struct tty_struct *tty)
2374 {
2375 struct cyclades_port *info = tty->driver_data;
2376 struct cyclades_card *card;
2377 int result;
2378
2379 if (serial_paranoia_check(info, tty->name, __func__))
2380 return -ENODEV;
2381
2382 card = info->card;
2383
2384 if (!cy_is_Z(card)) {
2385 unsigned long flags;
2386 int channel = info->line - card->first_line;
2387 u8 status;
2388
2389 spin_lock_irqsave(&card->card_lock, flags);
2390 cyy_writeb(info, CyCAR, channel & 0x03);
2391 status = cyy_readb(info, CyMSVR1);
2392 status |= cyy_readb(info, CyMSVR2);
2393 spin_unlock_irqrestore(&card->card_lock, flags);
2394
2395 if (info->rtsdtr_inv) {
2396 result = ((status & CyRTS) ? TIOCM_DTR : 0) |
2397 ((status & CyDTR) ? TIOCM_RTS : 0);
2398 } else {
2399 result = ((status & CyRTS) ? TIOCM_RTS : 0) |
2400 ((status & CyDTR) ? TIOCM_DTR : 0);
2401 }
2402 result |= ((status & CyDCD) ? TIOCM_CAR : 0) |
2403 ((status & CyRI) ? TIOCM_RNG : 0) |
2404 ((status & CyDSR) ? TIOCM_DSR : 0) |
2405 ((status & CyCTS) ? TIOCM_CTS : 0);
2406 } else {
2407 u32 lstatus;
2408
2409 if (!cyz_is_loaded(card)) {
2410 result = -ENODEV;
2411 goto end;
2412 }
2413
2414 lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
2415 result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
2416 ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
2417 ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
2418 ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
2419 ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
2420 ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
2421 }
2422 end:
2423 return result;
2424 } /* cy_tiomget */
2425
2426 static int
2427 cy_tiocmset(struct tty_struct *tty,
2428 unsigned int set, unsigned int clear)
2429 {
2430 struct cyclades_port *info = tty->driver_data;
2431 struct cyclades_card *card;
2432 unsigned long flags;
2433
2434 if (serial_paranoia_check(info, tty->name, __func__))
2435 return -ENODEV;
2436
2437 card = info->card;
2438 if (!cy_is_Z(card)) {
2439 spin_lock_irqsave(&card->card_lock, flags);
2440 cyy_change_rts_dtr(info, set, clear);
2441 spin_unlock_irqrestore(&card->card_lock, flags);
2442 } else {
2443 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
2444 int retval, channel = info->line - card->first_line;
2445 u32 rs;
2446
2447 if (!cyz_is_loaded(card))
2448 return -ENODEV;
2449
2450 spin_lock_irqsave(&card->card_lock, flags);
2451 rs = readl(&ch_ctrl->rs_control);
2452 if (set & TIOCM_RTS)
2453 rs |= C_RS_RTS;
2454 if (clear & TIOCM_RTS)
2455 rs &= ~C_RS_RTS;
2456 if (set & TIOCM_DTR) {
2457 rs |= C_RS_DTR;
2458 #ifdef CY_DEBUG_DTR
2459 printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
2460 #endif
2461 }
2462 if (clear & TIOCM_DTR) {
2463 rs &= ~C_RS_DTR;
2464 #ifdef CY_DEBUG_DTR
2465 printk(KERN_DEBUG "cyc:set_modem_info clearing "
2466 "Z DTR\n");
2467 #endif
2468 }
2469 cy_writel(&ch_ctrl->rs_control, rs);
2470 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
2471 spin_unlock_irqrestore(&card->card_lock, flags);
2472 if (retval != 0) {
2473 printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
2474 "was %x\n", info->line, retval);
2475 }
2476 }
2477 return 0;
2478 }
2479
2480 /*
2481 * cy_break() --- routine which turns the break handling on or off
2482 */
2483 static int cy_break(struct tty_struct *tty, int break_state)
2484 {
2485 struct cyclades_port *info = tty->driver_data;
2486 struct cyclades_card *card;
2487 unsigned long flags;
2488 int retval = 0;
2489
2490 if (serial_paranoia_check(info, tty->name, "cy_break"))
2491 return -EINVAL;
2492
2493 card = info->card;
2494
2495 spin_lock_irqsave(&card->card_lock, flags);
2496 if (!cy_is_Z(card)) {
2497 /* Let the transmit ISR take care of this (since it
2498 requires stuffing characters into the output stream).
2499 */
2500 if (break_state == -1) {
2501 if (!info->breakon) {
2502 info->breakon = 1;
2503 if (!info->xmit_cnt) {
2504 spin_unlock_irqrestore(&card->card_lock, flags);
2505 start_xmit(info);
2506 spin_lock_irqsave(&card->card_lock, flags);
2507 }
2508 }
2509 } else {
2510 if (!info->breakoff) {
2511 info->breakoff = 1;
2512 if (!info->xmit_cnt) {
2513 spin_unlock_irqrestore(&card->card_lock, flags);
2514 start_xmit(info);
2515 spin_lock_irqsave(&card->card_lock, flags);
2516 }
2517 }
2518 }
2519 } else {
2520 if (break_state == -1) {
2521 retval = cyz_issue_cmd(card,
2522 info->line - card->first_line,
2523 C_CM_SET_BREAK, 0L);
2524 if (retval != 0) {
2525 printk(KERN_ERR "cyc:cy_break (set) retval on "
2526 "ttyC%d was %x\n", info->line, retval);
2527 }
2528 } else {
2529 retval = cyz_issue_cmd(card,
2530 info->line - card->first_line,
2531 C_CM_CLR_BREAK, 0L);
2532 if (retval != 0) {
2533 printk(KERN_DEBUG "cyc:cy_break (clr) retval "
2534 "on ttyC%d was %x\n", info->line,
2535 retval);
2536 }
2537 }
2538 }
2539 spin_unlock_irqrestore(&card->card_lock, flags);
2540 return retval;
2541 } /* cy_break */
2542
2543 static int set_threshold(struct cyclades_port *info, unsigned long value)
2544 {
2545 struct cyclades_card *card = info->card;
2546 unsigned long flags;
2547
2548 if (!cy_is_Z(card)) {
2549 info->cor3 &= ~CyREC_FIFO;
2550 info->cor3 |= value & CyREC_FIFO;
2551
2552 spin_lock_irqsave(&card->card_lock, flags);
2553 cyy_writeb(info, CyCOR3, info->cor3);
2554 cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
2555 spin_unlock_irqrestore(&card->card_lock, flags);
2556 }
2557 return 0;
2558 } /* set_threshold */
2559
2560 static int get_threshold(struct cyclades_port *info,
2561 unsigned long __user *value)
2562 {
2563 struct cyclades_card *card = info->card;
2564
2565 if (!cy_is_Z(card)) {
2566 u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
2567 return put_user(tmp, value);
2568 }
2569 return 0;
2570 } /* get_threshold */
2571
2572 static int set_timeout(struct cyclades_port *info, unsigned long value)
2573 {
2574 struct cyclades_card *card = info->card;
2575 unsigned long flags;
2576
2577 if (!cy_is_Z(card)) {
2578 spin_lock_irqsave(&card->card_lock, flags);
2579 cyy_writeb(info, CyRTPR, value & 0xff);
2580 spin_unlock_irqrestore(&card->card_lock, flags);
2581 }
2582 return 0;
2583 } /* set_timeout */
2584
2585 static int get_timeout(struct cyclades_port *info,
2586 unsigned long __user *value)
2587 {
2588 struct cyclades_card *card = info->card;
2589
2590 if (!cy_is_Z(card)) {
2591 u8 tmp = cyy_readb(info, CyRTPR);
2592 return put_user(tmp, value);
2593 }
2594 return 0;
2595 } /* get_timeout */
2596
2597 static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
2598 struct cyclades_icount *cprev)
2599 {
2600 struct cyclades_icount cnow;
2601 unsigned long flags;
2602 int ret;
2603
2604 spin_lock_irqsave(&info->card->card_lock, flags);
2605 cnow = info->icount; /* atomic copy */
2606 spin_unlock_irqrestore(&info->card->card_lock, flags);
2607
2608 ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
2609 ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
2610 ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
2611 ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
2612
2613 *cprev = cnow;
2614
2615 return ret;
2616 }
2617
2618 /*
2619 * This routine allows the tty driver to implement device-
2620 * specific ioctl's. If the ioctl number passed in cmd is
2621 * not recognized by the driver, it should return ENOIOCTLCMD.
2622 */
2623 static int
2624 cy_ioctl(struct tty_struct *tty,
2625 unsigned int cmd, unsigned long arg)
2626 {
2627 struct cyclades_port *info = tty->driver_data;
2628 struct cyclades_icount cnow; /* kernel counter temps */
2629 int ret_val = 0;
2630 unsigned long flags;
2631 void __user *argp = (void __user *)arg;
2632
2633 if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
2634 return -ENODEV;
2635
2636 #ifdef CY_DEBUG_OTHER
2637 printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
2638 info->line, cmd, arg);
2639 #endif
2640
2641 switch (cmd) {
2642 case CYGETMON:
2643 if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
2644 ret_val = -EFAULT;
2645 break;
2646 }
2647 memset(&info->mon, 0, sizeof(info->mon));
2648 break;
2649 case CYGETTHRESH:
2650 ret_val = get_threshold(info, argp);
2651 break;
2652 case CYSETTHRESH:
2653 ret_val = set_threshold(info, arg);
2654 break;
2655 case CYGETDEFTHRESH:
2656 ret_val = put_user(info->default_threshold,
2657 (unsigned long __user *)argp);
2658 break;
2659 case CYSETDEFTHRESH:
2660 info->default_threshold = arg & 0x0f;
2661 break;
2662 case CYGETTIMEOUT:
2663 ret_val = get_timeout(info, argp);
2664 break;
2665 case CYSETTIMEOUT:
2666 ret_val = set_timeout(info, arg);
2667 break;
2668 case CYGETDEFTIMEOUT:
2669 ret_val = put_user(info->default_timeout,
2670 (unsigned long __user *)argp);
2671 break;
2672 case CYSETDEFTIMEOUT:
2673 info->default_timeout = arg & 0xff;
2674 break;
2675 case CYSETRFLOW:
2676 info->rflow = (int)arg;
2677 break;
2678 case CYGETRFLOW:
2679 ret_val = info->rflow;
2680 break;
2681 case CYSETRTSDTR_INV:
2682 info->rtsdtr_inv = (int)arg;
2683 break;
2684 case CYGETRTSDTR_INV:
2685 ret_val = info->rtsdtr_inv;
2686 break;
2687 case CYGETCD1400VER:
2688 ret_val = info->chip_rev;
2689 break;
2690 #ifndef CONFIG_CYZ_INTR
2691 case CYZSETPOLLCYCLE:
2692 if (arg > LONG_MAX / HZ)
2693 return -ENODEV;
2694 cyz_polling_cycle = (arg * HZ) / 1000;
2695 break;
2696 case CYZGETPOLLCYCLE:
2697 ret_val = (cyz_polling_cycle * 1000) / HZ;
2698 break;
2699 #endif /* CONFIG_CYZ_INTR */
2700 case CYSETWAIT:
2701 info->port.closing_wait = (unsigned short)arg * HZ / 100;
2702 break;
2703 case CYGETWAIT:
2704 ret_val = info->port.closing_wait / (HZ / 100);
2705 break;
2706 case TIOCGSERIAL:
2707 ret_val = cy_get_serial_info(info, argp);
2708 break;
2709 case TIOCSSERIAL:
2710 ret_val = cy_set_serial_info(info, tty, argp);
2711 break;
2712 case TIOCSERGETLSR: /* Get line status register */
2713 ret_val = get_lsr_info(info, argp);
2714 break;
2715 /*
2716 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
2717 * - mask passed in arg for lines of interest
2718 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
2719 * Caller should use TIOCGICOUNT to see which one it was
2720 */
2721 case TIOCMIWAIT:
2722 spin_lock_irqsave(&info->card->card_lock, flags);
2723 /* note the counters on entry */
2724 cnow = info->icount;
2725 spin_unlock_irqrestore(&info->card->card_lock, flags);
2726 ret_val = wait_event_interruptible(info->port.delta_msr_wait,
2727 cy_cflags_changed(info, arg, &cnow));
2728 break;
2729
2730 /*
2731 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2732 * Return: write counters to the user passed counter struct
2733 * NB: both 1->0 and 0->1 transitions are counted except for
2734 * RI where only 0->1 is counted.
2735 */
2736 default:
2737 ret_val = -ENOIOCTLCMD;
2738 }
2739
2740 #ifdef CY_DEBUG_OTHER
2741 printk(KERN_DEBUG "cyc:cy_ioctl done\n");
2742 #endif
2743 return ret_val;
2744 } /* cy_ioctl */
2745
2746 static int cy_get_icount(struct tty_struct *tty,
2747 struct serial_icounter_struct *sic)
2748 {
2749 struct cyclades_port *info = tty->driver_data;
2750 struct cyclades_icount cnow; /* Used to snapshot */
2751 unsigned long flags;
2752
2753 spin_lock_irqsave(&info->card->card_lock, flags);
2754 cnow = info->icount;
2755 spin_unlock_irqrestore(&info->card->card_lock, flags);
2756
2757 sic->cts = cnow.cts;
2758 sic->dsr = cnow.dsr;
2759 sic->rng = cnow.rng;
2760 sic->dcd = cnow.dcd;
2761 sic->rx = cnow.rx;
2762 sic->tx = cnow.tx;
2763 sic->frame = cnow.frame;
2764 sic->overrun = cnow.overrun;
2765 sic->parity = cnow.parity;
2766 sic->brk = cnow.brk;
2767 sic->buf_overrun = cnow.buf_overrun;
2768 return 0;
2769 }
2770
2771 /*
2772 * This routine allows the tty driver to be notified when
2773 * device's termios settings have changed. Note that a
2774 * well-designed tty driver should be prepared to accept the case
2775 * where old == NULL, and try to do something rational.
2776 */
2777 static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2778 {
2779 struct cyclades_port *info = tty->driver_data;
2780
2781 #ifdef CY_DEBUG_OTHER
2782 printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
2783 #endif
2784
2785 cy_set_line_char(info, tty);
2786
2787 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
2788 tty->hw_stopped = 0;
2789 cy_start(tty);
2790 }
2791 #if 0
2792 /*
2793 * No need to wake up processes in open wait, since they
2794 * sample the CLOCAL flag once, and don't recheck it.
2795 * XXX It's not clear whether the current behavior is correct
2796 * or not. Hence, this may change.....
2797 */
2798 if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
2799 wake_up_interruptible(&info->port.open_wait);
2800 #endif
2801 } /* cy_set_termios */
2802
2803 /* This function is used to send a high-priority XON/XOFF character to
2804 the device.
2805 */
2806 static void cy_send_xchar(struct tty_struct *tty, char ch)
2807 {
2808 struct cyclades_port *info = tty->driver_data;
2809 struct cyclades_card *card;
2810 int channel;
2811
2812 if (serial_paranoia_check(info, tty->name, "cy_send_xchar"))
2813 return;
2814
2815 info->x_char = ch;
2816
2817 if (ch)
2818 cy_start(tty);
2819
2820 card = info->card;
2821 channel = info->line - card->first_line;
2822
2823 if (cy_is_Z(card)) {
2824 if (ch == STOP_CHAR(tty))
2825 cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
2826 else if (ch == START_CHAR(tty))
2827 cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L);
2828 }
2829 }
2830
2831 /* This routine is called by the upper-layer tty layer to signal
2832 that incoming characters should be throttled because the input
2833 buffers are close to full.
2834 */
2835 static void cy_throttle(struct tty_struct *tty)
2836 {
2837 struct cyclades_port *info = tty->driver_data;
2838 struct cyclades_card *card;
2839 unsigned long flags;
2840
2841 #ifdef CY_DEBUG_THROTTLE
2842 printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty),
2843 info->line);
2844 #endif
2845
2846 if (serial_paranoia_check(info, tty->name, "cy_throttle"))
2847 return;
2848
2849 card = info->card;
2850
2851 if (I_IXOFF(tty)) {
2852 if (!cy_is_Z(card))
2853 cy_send_xchar(tty, STOP_CHAR(tty));
2854 else
2855 info->throttle = 1;
2856 }
2857
2858 if (C_CRTSCTS(tty)) {
2859 if (!cy_is_Z(card)) {
2860 spin_lock_irqsave(&card->card_lock, flags);
2861 cyy_change_rts_dtr(info, 0, TIOCM_RTS);
2862 spin_unlock_irqrestore(&card->card_lock, flags);
2863 } else {
2864 info->throttle = 1;
2865 }
2866 }
2867 } /* cy_throttle */
2868
2869 /*
2870 * This routine notifies the tty driver that it should signal
2871 * that characters can now be sent to the tty without fear of
2872 * overrunning the input buffers of the line disciplines.
2873 */
2874 static void cy_unthrottle(struct tty_struct *tty)
2875 {
2876 struct cyclades_port *info = tty->driver_data;
2877 struct cyclades_card *card;
2878 unsigned long flags;
2879
2880 #ifdef CY_DEBUG_THROTTLE
2881 printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n",
2882 tty_name(tty), info->line);
2883 #endif
2884
2885 if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
2886 return;
2887
2888 if (I_IXOFF(tty)) {
2889 if (info->x_char)
2890 info->x_char = 0;
2891 else
2892 cy_send_xchar(tty, START_CHAR(tty));
2893 }
2894
2895 if (C_CRTSCTS(tty)) {
2896 card = info->card;
2897 if (!cy_is_Z(card)) {
2898 spin_lock_irqsave(&card->card_lock, flags);
2899 cyy_change_rts_dtr(info, TIOCM_RTS, 0);
2900 spin_unlock_irqrestore(&card->card_lock, flags);
2901 } else {
2902 info->throttle = 0;
2903 }
2904 }
2905 } /* cy_unthrottle */
2906
2907 /* cy_start and cy_stop provide software output flow control as a
2908 function of XON/XOFF, software CTS, and other such stuff.
2909 */
2910 static void cy_stop(struct tty_struct *tty)
2911 {
2912 struct cyclades_card *cinfo;
2913 struct cyclades_port *info = tty->driver_data;
2914 int channel;
2915 unsigned long flags;
2916
2917 #ifdef CY_DEBUG_OTHER
2918 printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line);
2919 #endif
2920
2921 if (serial_paranoia_check(info, tty->name, "cy_stop"))
2922 return;
2923
2924 cinfo = info->card;
2925 channel = info->line - cinfo->first_line;
2926 if (!cy_is_Z(cinfo)) {
2927 spin_lock_irqsave(&cinfo->card_lock, flags);
2928 cyy_writeb(info, CyCAR, channel & 0x03);
2929 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
2930 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2931 }
2932 } /* cy_stop */
2933
2934 static void cy_start(struct tty_struct *tty)
2935 {
2936 struct cyclades_card *cinfo;
2937 struct cyclades_port *info = tty->driver_data;
2938 int channel;
2939 unsigned long flags;
2940
2941 #ifdef CY_DEBUG_OTHER
2942 printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line);
2943 #endif
2944
2945 if (serial_paranoia_check(info, tty->name, "cy_start"))
2946 return;
2947
2948 cinfo = info->card;
2949 channel = info->line - cinfo->first_line;
2950 if (!cy_is_Z(cinfo)) {
2951 spin_lock_irqsave(&cinfo->card_lock, flags);
2952 cyy_writeb(info, CyCAR, channel & 0x03);
2953 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
2954 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2955 }
2956 } /* cy_start */
2957
2958 /*
2959 * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
2960 */
2961 static void cy_hangup(struct tty_struct *tty)
2962 {
2963 struct cyclades_port *info = tty->driver_data;
2964
2965 #ifdef CY_DEBUG_OTHER
2966 printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line);
2967 #endif
2968
2969 if (serial_paranoia_check(info, tty->name, "cy_hangup"))
2970 return;
2971
2972 cy_flush_buffer(tty);
2973 cy_shutdown(info, tty);
2974 tty_port_hangup(&info->port);
2975 } /* cy_hangup */
2976
2977 static int cyy_carrier_raised(struct tty_port *port)
2978 {
2979 struct cyclades_port *info = container_of(port, struct cyclades_port,
2980 port);
2981 struct cyclades_card *cinfo = info->card;
2982 unsigned long flags;
2983 int channel = info->line - cinfo->first_line;
2984 u32 cd;
2985
2986 spin_lock_irqsave(&cinfo->card_lock, flags);
2987 cyy_writeb(info, CyCAR, channel & 0x03);
2988 cd = cyy_readb(info, CyMSVR1) & CyDCD;
2989 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2990
2991 return cd;
2992 }
2993
2994 static void cyy_dtr_rts(struct tty_port *port, int raise)
2995 {
2996 struct cyclades_port *info = container_of(port, struct cyclades_port,
2997 port);
2998 struct cyclades_card *cinfo = info->card;
2999 unsigned long flags;
3000
3001 spin_lock_irqsave(&cinfo->card_lock, flags);
3002 cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
3003 raise ? 0 : TIOCM_RTS | TIOCM_DTR);
3004 spin_unlock_irqrestore(&cinfo->card_lock, flags);
3005 }
3006
3007 static int cyz_carrier_raised(struct tty_port *port)
3008 {
3009 struct cyclades_port *info = container_of(port, struct cyclades_port,
3010 port);
3011
3012 return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
3013 }
3014
3015 static void cyz_dtr_rts(struct tty_port *port, int raise)
3016 {
3017 struct cyclades_port *info = container_of(port, struct cyclades_port,
3018 port);
3019 struct cyclades_card *cinfo = info->card;
3020 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
3021 int ret, channel = info->line - cinfo->first_line;
3022 u32 rs;
3023
3024 rs = readl(&ch_ctrl->rs_control);
3025 if (raise)
3026 rs |= C_RS_RTS | C_RS_DTR;
3027 else
3028 rs &= ~(C_RS_RTS | C_RS_DTR);
3029 cy_writel(&ch_ctrl->rs_control, rs);
3030 ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
3031 if (ret != 0)
3032 printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
3033 __func__, info->line, ret);
3034 #ifdef CY_DEBUG_DTR
3035 printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
3036 #endif
3037 }
3038
3039 static const struct tty_port_operations cyy_port_ops = {
3040 .carrier_raised = cyy_carrier_raised,
3041 .dtr_rts = cyy_dtr_rts,
3042 .shutdown = cy_do_close,
3043 };
3044
3045 static const struct tty_port_operations cyz_port_ops = {
3046 .carrier_raised = cyz_carrier_raised,
3047 .dtr_rts = cyz_dtr_rts,
3048 .shutdown = cy_do_close,
3049 };
3050
3051 /*
3052 * ---------------------------------------------------------------------
3053 * cy_init() and friends
3054 *
3055 * cy_init() is called at boot-time to initialize the serial driver.
3056 * ---------------------------------------------------------------------
3057 */
3058
3059 static int cy_init_card(struct cyclades_card *cinfo)
3060 {
3061 struct cyclades_port *info;
3062 unsigned int channel, port;
3063
3064 spin_lock_init(&cinfo->card_lock);
3065 cinfo->intr_enabled = 0;
3066
3067 cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
3068 GFP_KERNEL);
3069 if (cinfo->ports == NULL) {
3070 printk(KERN_ERR "Cyclades: cannot allocate ports\n");
3071 return -ENOMEM;
3072 }
3073
3074 for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
3075 channel++, port++) {
3076 info = &cinfo->ports[channel];
3077 tty_port_init(&info->port);
3078 info->magic = CYCLADES_MAGIC;
3079 info->card = cinfo;
3080 info->line = port;
3081
3082 info->port.closing_wait = CLOSING_WAIT_DELAY;
3083 info->port.close_delay = 5 * HZ / 10;
3084 init_completion(&info->shutdown_wait);
3085
3086 if (cy_is_Z(cinfo)) {
3087 struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
3088 struct ZFW_CTRL *zfw_ctrl;
3089
3090 info->port.ops = &cyz_port_ops;
3091 info->type = PORT_STARTECH;
3092
3093 zfw_ctrl = cinfo->base_addr +
3094 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3095 info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
3096 info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
3097
3098 if (cinfo->hw_ver == ZO_V1)
3099 info->xmit_fifo_size = CYZ_FIFO_SIZE;
3100 else
3101 info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
3102 #ifdef CONFIG_CYZ_INTR
3103 setup_timer(&cyz_rx_full_timer[port],
3104 cyz_rx_restart, (unsigned long)info);
3105 #endif
3106 } else {
3107 unsigned short chip_number;
3108 int index = cinfo->bus_index;
3109
3110 info->port.ops = &cyy_port_ops;
3111 info->type = PORT_CIRRUS;
3112 info->xmit_fifo_size = CyMAX_CHAR_FIFO;
3113 info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
3114 info->cor2 = CyETC;
3115 info->cor3 = 0x08; /* _very_ small rcv threshold */
3116
3117 chip_number = channel / CyPORTS_PER_CHIP;
3118 info->u.cyy.base_addr = cinfo->base_addr +
3119 (cy_chip_offset[chip_number] << index);
3120 info->chip_rev = cyy_readb(info, CyGFRCR);
3121
3122 if (info->chip_rev >= CD1400_REV_J) {
3123 /* It is a CD1400 rev. J or later */
3124 info->tbpr = baud_bpr_60[13]; /* Tx BPR */
3125 info->tco = baud_co_60[13]; /* Tx CO */
3126 info->rbpr = baud_bpr_60[13]; /* Rx BPR */
3127 info->rco = baud_co_60[13]; /* Rx CO */
3128 info->rtsdtr_inv = 1;
3129 } else {
3130 info->tbpr = baud_bpr_25[13]; /* Tx BPR */
3131 info->tco = baud_co_25[13]; /* Tx CO */
3132 info->rbpr = baud_bpr_25[13]; /* Rx BPR */
3133 info->rco = baud_co_25[13]; /* Rx CO */
3134 info->rtsdtr_inv = 0;
3135 }
3136 info->read_status_mask = CyTIMEOUT | CySPECHAR |
3137 CyBREAK | CyPARITY | CyFRAME | CyOVERRUN;
3138 }
3139
3140 }
3141
3142 #ifndef CONFIG_CYZ_INTR
3143 if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
3144 mod_timer(&cyz_timerlist, jiffies + 1);
3145 #ifdef CY_PCI_DEBUG
3146 printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
3147 #endif
3148 }
3149 #endif
3150 return 0;
3151 }
3152
3153 /* initialize chips on Cyclom-Y card -- return number of valid
3154 chips (which is number of ports/4) */
3155 static unsigned short cyy_init_card(void __iomem *true_base_addr,
3156 int index)
3157 {
3158 unsigned int chip_number;
3159 void __iomem *base_addr;
3160
3161 cy_writeb(true_base_addr + (Cy_HwReset << index), 0);
3162 /* Cy_HwReset is 0x1400 */
3163 cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0);
3164 /* Cy_ClrIntr is 0x1800 */
3165 udelay(500L);
3166
3167 for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD;
3168 chip_number++) {
3169 base_addr =
3170 true_base_addr + (cy_chip_offset[chip_number] << index);
3171 mdelay(1);
3172 if (readb(base_addr + (CyCCR << index)) != 0x00) {
3173 /*************
3174 printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
3175 chip_number, (unsigned long)base_addr);
3176 *************/
3177 return chip_number;
3178 }
3179
3180 cy_writeb(base_addr + (CyGFRCR << index), 0);
3181 udelay(10L);
3182
3183 /* The Cyclom-16Y does not decode address bit 9 and therefore
3184 cannot distinguish between references to chip 0 and a non-
3185 existent chip 4. If the preceding clearing of the supposed
3186 chip 4 GFRCR register appears at chip 0, there is no chip 4
3187 and this must be a Cyclom-16Y, not a Cyclom-32Ye.
3188 */
3189 if (chip_number == 4 && readb(true_base_addr +
3190 (cy_chip_offset[0] << index) +
3191 (CyGFRCR << index)) == 0) {
3192 return chip_number;
3193 }
3194
3195 cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET);
3196 mdelay(1);
3197
3198 if (readb(base_addr + (CyGFRCR << index)) == 0x00) {
3199 /*
3200 printk(" chip #%d at %#6lx is not responding ",
3201 chip_number, (unsigned long)base_addr);
3202 printk("(GFRCR stayed 0)\n",
3203 */
3204 return chip_number;
3205 }
3206 if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) !=
3207 0x40) {
3208 /*
3209 printk(" chip #%d at %#6lx is not valid (GFRCR == "
3210 "%#2x)\n",
3211 chip_number, (unsigned long)base_addr,
3212 base_addr[CyGFRCR<<index]);
3213 */
3214 return chip_number;
3215 }
3216 cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL);
3217 if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) {
3218 /* It is a CD1400 rev. J or later */
3219 /* Impossible to reach 5ms with this chip.
3220 Changed to 2ms instead (f = 500 Hz). */
3221 cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS);
3222 } else {
3223 /* f = 200 Hz */
3224 cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS);
3225 }
3226
3227 /*
3228 printk(" chip #%d at %#6lx is rev 0x%2x\n",
3229 chip_number, (unsigned long)base_addr,
3230 readb(base_addr+(CyGFRCR<<index)));
3231 */
3232 }
3233 return chip_number;
3234 } /* cyy_init_card */
3235
3236 /*
3237 * ---------------------------------------------------------------------
3238 * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
3239 * sets global variables and return the number of ISA boards found.
3240 * ---------------------------------------------------------------------
3241 */
3242 static int __init cy_detect_isa(void)
3243 {
3244 #ifdef CONFIG_ISA
3245 struct cyclades_card *card;
3246 unsigned short cy_isa_irq, nboard;
3247 void __iomem *cy_isa_address;
3248 unsigned short i, j, k, cy_isa_nchan;
3249 int isparam = 0;
3250
3251 nboard = 0;
3252
3253 /* Check for module parameters */
3254 for (i = 0; i < NR_CARDS; i++) {
3255 if (maddr[i] || i) {
3256 isparam = 1;
3257 cy_isa_addresses[i] = maddr[i];
3258 }
3259 if (!maddr[i])
3260 break;
3261 }
3262
3263 /* scan the address table probing for Cyclom-Y/ISA boards */
3264 for (i = 0; i < NR_ISA_ADDRS; i++) {
3265 unsigned int isa_address = cy_isa_addresses[i];
3266 if (isa_address == 0x0000)
3267 return nboard;
3268
3269 /* probe for CD1400... */
3270 cy_isa_address = ioremap_nocache(isa_address, CyISA_Ywin);
3271 if (cy_isa_address == NULL) {
3272 printk(KERN_ERR "Cyclom-Y/ISA: can't remap base "
3273 "address\n");
3274 continue;
3275 }
3276 cy_isa_nchan = CyPORTS_PER_CHIP *
3277 cyy_init_card(cy_isa_address, 0);
3278 if (cy_isa_nchan == 0) {
3279 iounmap(cy_isa_address);
3280 continue;
3281 }
3282
3283 if (isparam && i < NR_CARDS && irq[i])
3284 cy_isa_irq = irq[i];
3285 else
3286 /* find out the board's irq by probing */
3287 cy_isa_irq = detect_isa_irq(cy_isa_address);
3288 if (cy_isa_irq == 0) {
3289 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the "
3290 "IRQ could not be detected.\n",
3291 (unsigned long)cy_isa_address);
3292 iounmap(cy_isa_address);
3293 continue;
3294 }
3295
3296 if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
3297 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
3298 "more channels are available. Change NR_PORTS "
3299 "in cyclades.c and recompile kernel.\n",
3300 (unsigned long)cy_isa_address);
3301 iounmap(cy_isa_address);
3302 return nboard;
3303 }
3304 /* fill the next cy_card structure available */
3305 for (j = 0; j < NR_CARDS; j++) {
3306 card = &cy_card[j];
3307 if (card->base_addr == NULL)
3308 break;
3309 }
3310 if (j == NR_CARDS) { /* no more cy_cards available */
3311 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
3312 "more cards can be used. Change NR_CARDS in "
3313 "cyclades.c and recompile kernel.\n",
3314 (unsigned long)cy_isa_address);
3315 iounmap(cy_isa_address);
3316 return nboard;
3317 }
3318
3319 /* allocate IRQ */
3320 if (request_irq(cy_isa_irq, cyy_interrupt,
3321 0, "Cyclom-Y", card)) {
3322 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
3323 "could not allocate IRQ#%d.\n",
3324 (unsigned long)cy_isa_address, cy_isa_irq);
3325 iounmap(cy_isa_address);
3326 return nboard;
3327 }
3328
3329 /* set cy_card */
3330 card->base_addr = cy_isa_address;
3331 card->ctl_addr.p9050 = NULL;
3332 card->irq = (int)cy_isa_irq;
3333 card->bus_index = 0;
3334 card->first_line = cy_next_channel;
3335 card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
3336 card->nports = cy_isa_nchan;
3337 if (cy_init_card(card)) {
3338 card->base_addr = NULL;
3339 free_irq(cy_isa_irq, card);
3340 iounmap(cy_isa_address);
3341 continue;
3342 }
3343 nboard++;
3344
3345 printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: "
3346 "%d channels starting from port %d\n",
3347 j + 1, (unsigned long)cy_isa_address,
3348 (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
3349 cy_isa_irq, cy_isa_nchan, cy_next_channel);
3350
3351 for (k = 0, j = cy_next_channel;
3352 j < cy_next_channel + cy_isa_nchan; j++, k++)
3353 tty_port_register_device(&card->ports[k].port,
3354 cy_serial_driver, j, NULL);
3355 cy_next_channel += cy_isa_nchan;
3356 }
3357 return nboard;
3358 #else
3359 return 0;
3360 #endif /* CONFIG_ISA */
3361 } /* cy_detect_isa */
3362
3363 #ifdef CONFIG_PCI
3364 static inline int cyc_isfwstr(const char *str, unsigned int size)
3365 {
3366 unsigned int a;
3367
3368 for (a = 0; a < size && *str; a++, str++)
3369 if (*str & 0x80)
3370 return -EINVAL;
3371
3372 for (; a < size; a++, str++)
3373 if (*str)
3374 return -EINVAL;
3375
3376 return 0;
3377 }
3378
3379 static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data,
3380 unsigned int size)
3381 {
3382 for (; size > 0; size--) {
3383 cy_writel(fpga, *data++);
3384 udelay(10);
3385 }
3386 }
3387
3388 static void plx_init(struct pci_dev *pdev, int irq,
3389 struct RUNTIME_9060 __iomem *addr)
3390 {
3391 /* Reset PLX */
3392 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000);
3393 udelay(100L);
3394 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000);
3395
3396 /* Reload Config. Registers from EEPROM */
3397 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000);
3398 udelay(100L);
3399 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000);
3400
3401 /* For some yet unknown reason, once the PLX9060 reloads the EEPROM,
3402 * the IRQ is lost and, thus, we have to re-write it to the PCI config.
3403 * registers. This will remain here until we find a permanent fix.
3404 */
3405 pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
3406 }
3407
3408 static int __cyz_load_fw(const struct firmware *fw,
3409 const char *name, const u32 mailbox, void __iomem *base,
3410 void __iomem *fpga)
3411 {
3412 const void *ptr = fw->data;
3413 const struct zfile_header *h = ptr;
3414 const struct zfile_config *c, *cs;
3415 const struct zfile_block *b, *bs;
3416 unsigned int a, tmp, len = fw->size;
3417 #define BAD_FW KERN_ERR "Bad firmware: "
3418 if (len < sizeof(*h)) {
3419 printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h));
3420 return -EINVAL;
3421 }
3422
3423 cs = ptr + h->config_offset;
3424 bs = ptr + h->block_offset;
3425
3426 if ((void *)(cs + h->n_config) > ptr + len ||
3427 (void *)(bs + h->n_blocks) > ptr + len) {
3428 printk(BAD_FW "too short");
3429 return -EINVAL;
3430 }
3431
3432 if (cyc_isfwstr(h->name, sizeof(h->name)) ||
3433 cyc_isfwstr(h->date, sizeof(h->date))) {
3434 printk(BAD_FW "bad formatted header string\n");
3435 return -EINVAL;
3436 }
3437
3438 if (strncmp(name, h->name, sizeof(h->name))) {
3439 printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name);
3440 return -EINVAL;
3441 }
3442
3443 tmp = 0;
3444 for (c = cs; c < cs + h->n_config; c++) {
3445 for (a = 0; a < c->n_blocks; a++)
3446 if (c->block_list[a] > h->n_blocks) {
3447 printk(BAD_FW "bad block ref number in cfgs\n");
3448 return -EINVAL;
3449 }
3450 if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */
3451 tmp++;
3452 }
3453 if (!tmp) {
3454 printk(BAD_FW "nothing appropriate\n");
3455 return -EINVAL;
3456 }
3457
3458 for (b = bs; b < bs + h->n_blocks; b++)
3459 if (b->file_offset + b->size > len) {
3460 printk(BAD_FW "bad block data offset\n");
3461 return -EINVAL;
3462 }
3463
3464 /* everything is OK, let's seek'n'load it */
3465 for (c = cs; c < cs + h->n_config; c++)
3466 if (c->mailbox == mailbox && c->function == 0)
3467 break;
3468
3469 for (a = 0; a < c->n_blocks; a++) {
3470 b = &bs[c->block_list[a]];
3471 if (b->type == ZBLOCK_FPGA) {
3472 if (fpga != NULL)
3473 cyz_fpga_copy(fpga, ptr + b->file_offset,
3474 b->size);
3475 } else {
3476 if (base != NULL)
3477 memcpy_toio(base + b->ram_offset,
3478 ptr + b->file_offset, b->size);
3479 }
3480 }
3481 #undef BAD_FW
3482 return 0;
3483 }
3484
3485 static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
3486 struct RUNTIME_9060 __iomem *ctl_addr, int irq)
3487 {
3488 const struct firmware *fw;
3489 struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS;
3490 struct CUSTOM_REG __iomem *cust = base_addr;
3491 struct ZFW_CTRL __iomem *pt_zfwctrl;
3492 void __iomem *tmp;
3493 u32 mailbox, status, nchan;
3494 unsigned int i;
3495 int retval;
3496
3497 retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev);
3498 if (retval) {
3499 dev_err(&pdev->dev, "can't get firmware\n");
3500 goto err;
3501 }
3502
3503 /* Check whether the firmware is already loaded and running. If
3504 positive, skip this board */
3505 if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
3506 u32 cntval = readl(base_addr + 0x190);
3507
3508 udelay(100);
3509 if (cntval != readl(base_addr + 0x190)) {
3510 /* FW counter is working, FW is running */
3511 dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. "
3512 "Skipping board.\n");
3513 retval = 0;
3514 goto err_rel;
3515 }
3516 }
3517
3518 /* start boot */
3519 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) &
3520 ~0x00030800UL);
3521
3522 mailbox = readl(&ctl_addr->mail_box_0);
3523
3524 if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
3525 /* stops CPU and set window to beginning of RAM */
3526 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3527 cy_writel(&cust->cpu_stop, 0);
3528 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3529 udelay(100);
3530 }
3531
3532 plx_init(pdev, irq, ctl_addr);
3533
3534 if (mailbox != 0) {
3535 /* load FPGA */
3536 retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL,
3537 base_addr);
3538 if (retval)
3539 goto err_rel;
3540 if (!__cyz_fpga_loaded(ctl_addr)) {
3541 dev_err(&pdev->dev, "fw upload successful, but fw is "
3542 "not loaded\n");
3543 goto err_rel;
3544 }
3545 }
3546
3547 /* stops CPU and set window to beginning of RAM */
3548 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3549 cy_writel(&cust->cpu_stop, 0);
3550 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3551 udelay(100);
3552
3553 /* clear memory */
3554 for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
3555 cy_writeb(tmp, 255);
3556 if (mailbox != 0) {
3557 /* set window to last 512K of RAM */
3558 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
3559 for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
3560 cy_writeb(tmp, 255);
3561 /* set window to beginning of RAM */
3562 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3563 }
3564
3565 retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
3566 release_firmware(fw);
3567 if (retval)
3568 goto err;
3569
3570 /* finish boot and start boards */
3571 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3572 cy_writel(&cust->cpu_start, 0);
3573 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3574 i = 0;
3575 while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40)
3576 msleep(100);
3577 if (status != ZFIRM_ID) {
3578 if (status == ZFIRM_HLT) {
3579 dev_err(&pdev->dev, "you need an external power supply "
3580 "for this number of ports. Firmware halted and "
3581 "board reset.\n");
3582 retval = -EIO;
3583 goto err;
3584 }
3585 dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting "
3586 "some more time\n", status);
3587 while ((status = readl(&fid->signature)) != ZFIRM_ID &&
3588 i++ < 200)
3589 msleep(100);
3590 if (status != ZFIRM_ID) {
3591 dev_err(&pdev->dev, "Board not started in 20 seconds! "
3592 "Giving up. (fid->signature = 0x%x)\n",
3593 status);
3594 dev_info(&pdev->dev, "*** Warning ***: if you are "
3595 "upgrading the FW, please power cycle the "
3596 "system before loading the new FW to the "
3597 "Cyclades-Z.\n");
3598
3599 if (__cyz_fpga_loaded(ctl_addr))
3600 plx_init(pdev, irq, ctl_addr);
3601
3602 retval = -EIO;
3603 goto err;
3604 }
3605 dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n",
3606 i / 10);
3607 }
3608 pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr);
3609
3610 dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n",
3611 base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
3612 base_addr + readl(&fid->zfwctrl_addr));
3613
3614 nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
3615 dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
3616 readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
3617
3618 if (nchan == 0) {
3619 dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
3620 "check the connection between the Z host card and the "
3621 "serial expanders.\n");
3622
3623 if (__cyz_fpga_loaded(ctl_addr))
3624 plx_init(pdev, irq, ctl_addr);
3625
3626 dev_info(&pdev->dev, "Null number of ports detected. Board "
3627 "reset.\n");
3628 retval = 0;
3629 goto err;
3630 }
3631
3632 cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX);
3633 cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION);
3634
3635 /*
3636 Early firmware failed to start looking for commands.
3637 This enables firmware interrupts for those commands.
3638 */
3639 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
3640 (1 << 17));
3641 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
3642 0x00030800UL);
3643
3644 return nchan;
3645 err_rel:
3646 release_firmware(fw);
3647 err:
3648 return retval;
3649 }
3650
3651 static int cy_pci_probe(struct pci_dev *pdev,
3652 const struct pci_device_id *ent)
3653 {
3654 struct cyclades_card *card;
3655 void __iomem *addr0 = NULL, *addr2 = NULL;
3656 char *card_name = NULL;
3657 u32 uninitialized_var(mailbox);
3658 unsigned int device_id, nchan = 0, card_no, i, j;
3659 unsigned char plx_ver;
3660 int retval, irq;
3661
3662 retval = pci_enable_device(pdev);
3663 if (retval) {
3664 dev_err(&pdev->dev, "cannot enable device\n");
3665 goto err;
3666 }
3667
3668 /* read PCI configuration area */
3669 irq = pdev->irq;
3670 device_id = pdev->device & ~PCI_DEVICE_ID_MASK;
3671
3672 #if defined(__alpha__)
3673 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
3674 dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low "
3675 "addresses on Alpha systems.\n");
3676 retval = -EIO;
3677 goto err_dis;
3678 }
3679 #endif
3680 if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
3681 dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low "
3682 "addresses\n");
3683 retval = -EIO;
3684 goto err_dis;
3685 }
3686
3687 if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
3688 dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring "
3689 "it...\n");
3690 pdev->resource[2].flags &= ~IORESOURCE_IO;
3691 }
3692
3693 retval = pci_request_regions(pdev, "cyclades");
3694 if (retval) {
3695 dev_err(&pdev->dev, "failed to reserve resources\n");
3696 goto err_dis;
3697 }
3698
3699 retval = -EIO;
3700 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3701 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3702 card_name = "Cyclom-Y";
3703
3704 addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
3705 CyPCI_Yctl);
3706 if (addr0 == NULL) {
3707 dev_err(&pdev->dev, "can't remap ctl region\n");
3708 goto err_reg;
3709 }
3710 addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
3711 CyPCI_Ywin);
3712 if (addr2 == NULL) {
3713 dev_err(&pdev->dev, "can't remap base region\n");
3714 goto err_unmap;
3715 }
3716
3717 nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1);
3718 if (nchan == 0) {
3719 dev_err(&pdev->dev, "Cyclom-Y PCI host card with no "
3720 "Serial-Modules\n");
3721 goto err_unmap;
3722 }
3723 } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
3724 struct RUNTIME_9060 __iomem *ctl_addr;
3725
3726 ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
3727 CyPCI_Zctl);
3728 if (addr0 == NULL) {
3729 dev_err(&pdev->dev, "can't remap ctl region\n");
3730 goto err_reg;
3731 }
3732
3733 /* Disable interrupts on the PLX before resetting it */
3734 cy_writew(&ctl_addr->intr_ctrl_stat,
3735 readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
3736
3737 plx_init(pdev, irq, addr0);
3738
3739 mailbox = readl(&ctl_addr->mail_box_0);
3740
3741 addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
3742 mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
3743 if (addr2 == NULL) {
3744 dev_err(&pdev->dev, "can't remap base region\n");
3745 goto err_unmap;
3746 }
3747
3748 if (mailbox == ZE_V1) {
3749 card_name = "Cyclades-Ze";
3750 } else {
3751 card_name = "Cyclades-8Zo";
3752 #ifdef CY_PCI_DEBUG
3753 if (mailbox == ZO_V1) {
3754 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3755 dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA "
3756 "id %lx, ver %lx\n", (ulong)(0xff &
3757 readl(&((struct CUSTOM_REG *)addr2)->
3758 fpga_id)), (ulong)(0xff &
3759 readl(&((struct CUSTOM_REG *)addr2)->
3760 fpga_version)));
3761 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3762 } else {
3763 dev_info(&pdev->dev, "Cyclades-Z/PCI: New "
3764 "Cyclades-Z board. FPGA not loaded\n");
3765 }
3766 #endif
3767 /* The following clears the firmware id word. This
3768 ensures that the driver will not attempt to talk to
3769 the board until it has been properly initialized.
3770 */
3771 if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
3772 cy_writel(addr2 + ID_ADDRESS, 0L);
3773 }
3774
3775 retval = cyz_load_fw(pdev, addr2, addr0, irq);
3776 if (retval <= 0)
3777 goto err_unmap;
3778 nchan = retval;
3779 }
3780
3781 if ((cy_next_channel + nchan) > NR_PORTS) {
3782 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
3783 "channels are available. Change NR_PORTS in "
3784 "cyclades.c and recompile kernel.\n");
3785 goto err_unmap;
3786 }
3787 /* fill the next cy_card structure available */
3788 for (card_no = 0; card_no < NR_CARDS; card_no++) {
3789 card = &cy_card[card_no];
3790 if (card->base_addr == NULL)
3791 break;
3792 }
3793 if (card_no == NR_CARDS) { /* no more cy_cards available */
3794 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
3795 "more cards can be used. Change NR_CARDS in "
3796 "cyclades.c and recompile kernel.\n");
3797 goto err_unmap;
3798 }
3799
3800 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3801 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3802 /* allocate IRQ */
3803 retval = request_irq(irq, cyy_interrupt,
3804 IRQF_SHARED, "Cyclom-Y", card);
3805 if (retval) {
3806 dev_err(&pdev->dev, "could not allocate IRQ\n");
3807 goto err_unmap;
3808 }
3809 card->num_chips = nchan / CyPORTS_PER_CHIP;
3810 } else {
3811 struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
3812 struct ZFW_CTRL __iomem *zfw_ctrl;
3813
3814 zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3815
3816 card->hw_ver = mailbox;
3817 card->num_chips = (unsigned int)-1;
3818 card->board_ctrl = &zfw_ctrl->board_ctrl;
3819 #ifdef CONFIG_CYZ_INTR
3820 /* allocate IRQ only if board has an IRQ */
3821 if (irq != 0 && irq != 255) {
3822 retval = request_irq(irq, cyz_interrupt,
3823 IRQF_SHARED, "Cyclades-Z", card);
3824 if (retval) {
3825 dev_err(&pdev->dev, "could not allocate IRQ\n");
3826 goto err_unmap;
3827 }
3828 }
3829 #endif /* CONFIG_CYZ_INTR */
3830 }
3831
3832 /* set cy_card */
3833 card->base_addr = addr2;
3834 card->ctl_addr.p9050 = addr0;
3835 card->irq = irq;
3836 card->bus_index = 1;
3837 card->first_line = cy_next_channel;
3838 card->nports = nchan;
3839 retval = cy_init_card(card);
3840 if (retval)
3841 goto err_null;
3842
3843 pci_set_drvdata(pdev, card);
3844
3845 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3846 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3847 /* enable interrupts in the PCI interface */
3848 plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
3849 switch (plx_ver) {
3850 case PLX_9050:
3851 cy_writeb(addr0 + 0x4c, 0x43);
3852 break;
3853
3854 case PLX_9060:
3855 case PLX_9080:
3856 default: /* Old boards, use PLX_9060 */
3857 {
3858 struct RUNTIME_9060 __iomem *ctl_addr = addr0;
3859 plx_init(pdev, irq, ctl_addr);
3860 cy_writew(&ctl_addr->intr_ctrl_stat,
3861 readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
3862 break;
3863 }
3864 }
3865 }
3866
3867 dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
3868 "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
3869 for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++)
3870 tty_port_register_device(&card->ports[j].port,
3871 cy_serial_driver, i, &pdev->dev);
3872 cy_next_channel += nchan;
3873
3874 return 0;
3875 err_null:
3876 card->base_addr = NULL;
3877 free_irq(irq, card);
3878 err_unmap:
3879 iounmap(addr0);
3880 if (addr2)
3881 iounmap(addr2);
3882 err_reg:
3883 pci_release_regions(pdev);
3884 err_dis:
3885 pci_disable_device(pdev);
3886 err:
3887 return retval;
3888 }
3889
3890 static void cy_pci_remove(struct pci_dev *pdev)
3891 {
3892 struct cyclades_card *cinfo = pci_get_drvdata(pdev);
3893 unsigned int i, channel;
3894
3895 /* non-Z with old PLX */
3896 if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
3897 PLX_9050)
3898 cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
3899 else
3900 #ifndef CONFIG_CYZ_INTR
3901 if (!cy_is_Z(cinfo))
3902 #endif
3903 cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
3904 readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
3905 ~0x0900);
3906
3907 iounmap(cinfo->base_addr);
3908 if (cinfo->ctl_addr.p9050)
3909 iounmap(cinfo->ctl_addr.p9050);
3910 if (cinfo->irq
3911 #ifndef CONFIG_CYZ_INTR
3912 && !cy_is_Z(cinfo)
3913 #endif /* CONFIG_CYZ_INTR */
3914 )
3915 free_irq(cinfo->irq, cinfo);
3916 pci_release_regions(pdev);
3917
3918 cinfo->base_addr = NULL;
3919 for (channel = 0, i = cinfo->first_line; i < cinfo->first_line +
3920 cinfo->nports; i++, channel++) {
3921 tty_unregister_device(cy_serial_driver, i);
3922 tty_port_destroy(&cinfo->ports[channel].port);
3923 }
3924 cinfo->nports = 0;
3925 kfree(cinfo->ports);
3926 }
3927
3928 static struct pci_driver cy_pci_driver = {
3929 .name = "cyclades",
3930 .id_table = cy_pci_dev_id,
3931 .probe = cy_pci_probe,
3932 .remove = cy_pci_remove
3933 };
3934 #endif
3935
3936 static int cyclades_proc_show(struct seq_file *m, void *v)
3937 {
3938 struct cyclades_port *info;
3939 unsigned int i, j;
3940 __u32 cur_jifs = jiffies;
3941
3942 seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn "
3943 "IdleIn Overruns Ldisc\n");
3944
3945 /* Output one line for each known port */
3946 for (i = 0; i < NR_CARDS; i++)
3947 for (j = 0; j < cy_card[i].nports; j++) {
3948 info = &cy_card[i].ports[j];
3949
3950 if (info->port.count) {
3951 /* XXX is the ldisc num worth this? */
3952 struct tty_struct *tty;
3953 struct tty_ldisc *ld;
3954 int num = 0;
3955 tty = tty_port_tty_get(&info->port);
3956 if (tty) {
3957 ld = tty_ldisc_ref(tty);
3958 if (ld) {
3959 num = ld->ops->num;
3960 tty_ldisc_deref(ld);
3961 }
3962 tty_kref_put(tty);
3963 }
3964 seq_printf(m, "%3d %8lu %10lu %8lu "
3965 "%10lu %8lu %9lu %6d\n", info->line,
3966 (cur_jifs - info->idle_stats.in_use) /
3967 HZ, info->idle_stats.xmit_bytes,
3968 (cur_jifs - info->idle_stats.xmit_idle)/
3969 HZ, info->idle_stats.recv_bytes,
3970 (cur_jifs - info->idle_stats.recv_idle)/
3971 HZ, info->idle_stats.overruns,
3972 num);
3973 } else
3974 seq_printf(m, "%3d %8lu %10lu %8lu "
3975 "%10lu %8lu %9lu %6ld\n",
3976 info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
3977 }
3978 return 0;
3979 }
3980
3981 static int cyclades_proc_open(struct inode *inode, struct file *file)
3982 {
3983 return single_open(file, cyclades_proc_show, NULL);
3984 }
3985
3986 static const struct file_operations cyclades_proc_fops = {
3987 .owner = THIS_MODULE,
3988 .open = cyclades_proc_open,
3989 .read = seq_read,
3990 .llseek = seq_lseek,
3991 .release = single_release,
3992 };
3993
3994 /* The serial driver boot-time initialization code!
3995 Hardware I/O ports are mapped to character special devices on a
3996 first found, first allocated manner. That is, this code searches
3997 for Cyclom cards in the system. As each is found, it is probed
3998 to discover how many chips (and thus how many ports) are present.
3999 These ports are mapped to the tty ports 32 and upward in monotonic
4000 fashion. If an 8-port card is replaced with a 16-port card, the
4001 port mapping on a following card will shift.
4002
4003 This approach is different from what is used in the other serial
4004 device driver because the Cyclom is more properly a multiplexer,
4005 not just an aggregation of serial ports on one card.
4006
4007 If there are more cards with more ports than have been
4008 statically allocated above, a warning is printed and the
4009 extra ports are ignored.
4010 */
4011
4012 static const struct tty_operations cy_ops = {
4013 .open = cy_open,
4014 .close = cy_close,
4015 .write = cy_write,
4016 .put_char = cy_put_char,
4017 .flush_chars = cy_flush_chars,
4018 .write_room = cy_write_room,
4019 .chars_in_buffer = cy_chars_in_buffer,
4020 .flush_buffer = cy_flush_buffer,
4021 .ioctl = cy_ioctl,
4022 .throttle = cy_throttle,
4023 .unthrottle = cy_unthrottle,
4024 .set_termios = cy_set_termios,
4025 .stop = cy_stop,
4026 .start = cy_start,
4027 .hangup = cy_hangup,
4028 .break_ctl = cy_break,
4029 .wait_until_sent = cy_wait_until_sent,
4030 .tiocmget = cy_tiocmget,
4031 .tiocmset = cy_tiocmset,
4032 .get_icount = cy_get_icount,
4033 .proc_fops = &cyclades_proc_fops,
4034 };
4035
4036 static int __init cy_init(void)
4037 {
4038 unsigned int nboards;
4039 int retval = -ENOMEM;
4040
4041 cy_serial_driver = alloc_tty_driver(NR_PORTS);
4042 if (!cy_serial_driver)
4043 goto err;
4044
4045 printk(KERN_INFO "Cyclades driver " CY_VERSION "\n");
4046
4047 /* Initialize the tty_driver structure */
4048
4049 cy_serial_driver->driver_name = "cyclades";
4050 cy_serial_driver->name = "ttyC";
4051 cy_serial_driver->major = CYCLADES_MAJOR;
4052 cy_serial_driver->minor_start = 0;
4053 cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4054 cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
4055 cy_serial_driver->init_termios = tty_std_termios;
4056 cy_serial_driver->init_termios.c_cflag =
4057 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4058 cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
4059 tty_set_operations(cy_serial_driver, &cy_ops);
4060
4061 retval = tty_register_driver(cy_serial_driver);
4062 if (retval) {
4063 printk(KERN_ERR "Couldn't register Cyclades serial driver\n");
4064 goto err_frtty;
4065 }
4066
4067 /* the code below is responsible to find the boards. Each different
4068 type of board has its own detection routine. If a board is found,
4069 the next cy_card structure available is set by the detection
4070 routine. These functions are responsible for checking the
4071 availability of cy_card and cy_port data structures and updating
4072 the cy_next_channel. */
4073
4074 /* look for isa boards */
4075 nboards = cy_detect_isa();
4076
4077 #ifdef CONFIG_PCI
4078 /* look for pci boards */
4079 retval = pci_register_driver(&cy_pci_driver);
4080 if (retval && !nboards) {
4081 tty_unregister_driver(cy_serial_driver);
4082 goto err_frtty;
4083 }
4084 #endif
4085
4086 return 0;
4087 err_frtty:
4088 put_tty_driver(cy_serial_driver);
4089 err:
4090 return retval;
4091 } /* cy_init */
4092
4093 static void __exit cy_cleanup_module(void)
4094 {
4095 struct cyclades_card *card;
4096 unsigned int i, e1;
4097
4098 #ifndef CONFIG_CYZ_INTR
4099 del_timer_sync(&cyz_timerlist);
4100 #endif /* CONFIG_CYZ_INTR */
4101
4102 e1 = tty_unregister_driver(cy_serial_driver);
4103 if (e1)
4104 printk(KERN_ERR "failed to unregister Cyclades serial "
4105 "driver(%d)\n", e1);
4106
4107 #ifdef CONFIG_PCI
4108 pci_unregister_driver(&cy_pci_driver);
4109 #endif
4110
4111 for (i = 0; i < NR_CARDS; i++) {
4112 card = &cy_card[i];
4113 if (card->base_addr) {
4114 /* clear interrupt */
4115 cy_writeb(card->base_addr + Cy_ClrIntr, 0);
4116 iounmap(card->base_addr);
4117 if (card->ctl_addr.p9050)
4118 iounmap(card->ctl_addr.p9050);
4119 if (card->irq
4120 #ifndef CONFIG_CYZ_INTR
4121 && !cy_is_Z(card)
4122 #endif /* CONFIG_CYZ_INTR */
4123 )
4124 free_irq(card->irq, card);
4125 for (e1 = card->first_line; e1 < card->first_line +
4126 card->nports; e1++)
4127 tty_unregister_device(cy_serial_driver, e1);
4128 kfree(card->ports);
4129 }
4130 }
4131
4132 put_tty_driver(cy_serial_driver);
4133 } /* cy_cleanup_module */
4134
4135 module_init(cy_init);
4136 module_exit(cy_cleanup_module);
4137
4138 MODULE_LICENSE("GPL");
4139 MODULE_VERSION(CY_VERSION);
4140 MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR);
4141 MODULE_FIRMWARE("cyzfirm.bin");
Linux with added FPC-III support