Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt

   1 DesignWare HDMI bridge bindings
   2
   3 Required properties:
   4 - compatible: platform specific such as:
   5    * "snps,dw-hdmi-tx"
   6    * "fsl,imx6q-hdmi"
   7    * "fsl,imx6dl-hdmi"
   8    * "rockchip,rk3288-dw-hdmi"
   9 - reg: Physical base address and length of the controller's registers.
  10 - interrupts: The HDMI interrupt number
  11 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
  12   as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
  13   the clocks are soc specific, the clock-names should be "iahb", "isfr"
  14 -port@[X]: SoC specific port nodes with endpoint definitions as defined
  15    in Documentation/devicetree/bindings/media/video-interfaces.txt,
  16    please refer to the SoC specific binding document:
  17     * Documentation/devicetree/bindings/display/imx/hdmi.txt
  18     * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
  19
  20 Optional properties
  21 - reg-io-width: the width of the reg:1,4, default set to 1 if not present
  22 - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  23 - clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
  24
  25 Example:
  26         hdmi: hdmi@0120000 {
  27                 compatible = "fsl,imx6q-hdmi";
  28                 reg = <0x00120000 0x9000>;
  29                 interrupts = <0 115 0x04>;
  30                 gpr = <&gpr>;
  31                 clocks = <&clks 123>, <&clks 124>;
  32                 clock-names = "iahb", "isfr";
  33                 ddc-i2c-bus = <&i2c2>;
  34
  35                 port@0 {
  36                         reg = <0>;
  37
  38                         hdmi_mux_0: endpoint {
  39                                 remote-endpoint = <&ipu1_di0_hdmi>;
  40                         };
  41                 };
  42
  43                 port@1 {
  44                         reg = <1>;
  45
  46                         hdmi_mux_1: endpoint {
  47                                 remote-endpoint = <&ipu1_di1_hdmi>;
  48                         };
  49                 };
  50         };