Documentation/devicetree/bindings/display/bridge/ptn3460.txt

   1 ptn3460 bridge bindings
   2
   3 Required properties:
   4         - compatible: "nxp,ptn3460"
   5         - reg: i2c address of the bridge
   6         - powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
   7         - reset-gpio: OF device-tree gpio specification for RST_N pin.
   8         - edid-emulation: The EDID emulation entry to use
   9                 +-------+------------+------------------+
  10                 | Value | Resolution | Description      |
  11                 |   0   |  1024x768  | NXP Generic      |
  12                 |   1   |  1920x1080 | NXP Generic      |
  13                 |   2   |  1920x1080 | NXP Generic      |
  14                 |   3   |  1600x900  | Samsung LTM200KT |
  15                 |   4   |  1920x1080 | Samsung LTM230HT |
  16                 |   5   |  1366x768  | NXP Generic      |
  17                 |   6   |  1600x900  | ChiMei M215HGE   |
  18                 +-------+------------+------------------+
  19
  20         - video interfaces: Device node can contain video interface port
  21                             nodes for panel according to [1].
  22
  23 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
  24
  25 Example:
  26         lvds-bridge@20 {
  27                 compatible = "nxp,ptn3460";
  28                 reg = <0x20>;
  29                 powerdown-gpio = <&gpy2 5 1 0 0>;
  30                 reset-gpio = <&gpx1 5 1 0 0>;
  31                 edid-emulation = <5>;
  32                 ports {
  33                         port@0 {
  34                                 bridge_out: endpoint {
  35                                         remote-endpoint = <&panel_in>;
  36                                 };
  37                         };
  38                 };
  39         };