Documentation/devicetree/bindings/display/msm/hdmi.txt

   1 Qualcomm adreno/snapdragon hdmi output
   2
   3 Required properties:
   4 - compatible: one of the following
   5    * "qcom,hdmi-tx-8996"
   6    * "qcom,hdmi-tx-8994"
   7    * "qcom,hdmi-tx-8084"
   8    * "qcom,hdmi-tx-8974"
   9    * "qcom,hdmi-tx-8660"
  10    * "qcom,hdmi-tx-8960"
  11 - reg: Physical base address and length of the controller's registers
  12 - reg-names: "core_physical"
  13 - interrupts: The interrupt signal from the hdmi block.
  14 - power-domains: Should be <&mmcc MDSS_GDSC>.
  15 - clocks: device clocks
  16   See ../clocks/clock-bindings.txt for details.
  17 - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
  18 - qcom,hdmi-tx-ddc-data-gpio: ddc data pin
  19 - qcom,hdmi-tx-hpd-gpio: hpd pin
  20 - core-vdda-supply: phandle to supply regulator
  21 - hdmi-mux-supply: phandle to mux regulator
  22 - phys: the phandle for the HDMI PHY device
  23 - phy-names: the name of the corresponding PHY device
  24
  25 Optional properties:
  26 - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
  27 - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
  28 - power-domains: reference to the power domain(s), if available.
  29 - pinctrl-names: the pin control state names; should contain "default"
  30 - pinctrl-0: the default pinctrl state (active)
  31 - pinctrl-1: the "sleep" pinctrl state
  32
  33 HDMI PHY:
  34 Required properties:
  35 - compatible: Could be the following
  36   * "qcom,hdmi-phy-8660"
  37   * "qcom,hdmi-phy-8960"
  38   * "qcom,hdmi-phy-8974"
  39   * "qcom,hdmi-phy-8084"
  40   * "qcom,hdmi-phy-8996"
  41 - #phy-cells: Number of cells in a PHY specifier; Should be 0.
  42 - reg: Physical base address and length of the registers of the PHY sub blocks.
  43 - reg-names: The names of register regions. The following regions are required:
  44   * "hdmi_phy"
  45   * "hdmi_pll"
  46   For HDMI PHY on msm8996, these additional register regions are required:
  47     * "hdmi_tx_l0"
  48     * "hdmi_tx_l1"
  49     * "hdmi_tx_l3"
  50     * "hdmi_tx_l4"
  51 - power-domains: Should be <&mmcc MDSS_GDSC>.
  52 - clocks: device clocks
  53   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
  54 - core-vdda-supply: phandle to vdda regulator device node
  55
  56 Example:
  57
  58 / {
  59         ...
  60
  61         hdmi: hdmi@4a00000 {
  62                 compatible = "qcom,hdmi-tx-8960";
  63                 reg-names = "core_physical";
  64                 reg = <0x04a00000 0x2f0>;
  65                 interrupts = <GIC_SPI 79 0>;
  66                 power-domains = <&mmcc MDSS_GDSC>;
  67                 clock-names =
  68                     "core_clk",
  69                     "master_iface_clk",
  70                     "slave_iface_clk";
  71                 clocks =
  72                     <&mmcc HDMI_APP_CLK>,
  73                     <&mmcc HDMI_M_AHB_CLK>,
  74                     <&mmcc HDMI_S_AHB_CLK>;
  75                 qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
  76                 qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
  77                 qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
  78                 core-vdda-supply = <&pm8921_hdmi_mvs>;
  79                 hdmi-mux-supply = <&ext_3p3v>;
  80                 pinctrl-names = "default", "sleep";
  81                 pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
  82                 pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
  83
  84                 phys = <&hdmi_phy>;
  85                 phy-names = "hdmi_phy";
  86         };
  87
  88         hdmi_phy: phy@4a00400 {
  89                 compatible = "qcom,hdmi-phy-8960";
  90                 reg-names = "hdmi_phy",
  91                             "hdmi_pll";
  92                 reg = <0x4a00400 0x60>,
  93                       <0x4a00500 0x100>;
  94                 #phy-cells = <0>;
  95                 power-domains = <&mmcc MDSS_GDSC>;
  96                 clock-names = "slave_iface_clk";
  97                 clocks = <&mmcc HDMI_S_AHB_CLK>;
  98                 core-vdda-supply = <&pm8921_hdmi_mvs>;
  99         };
 100 };