Documentation/devicetree/bindings/usb/keystone-usb.txt

   1 TI Keystone Soc USB Controller
   2
   3 DWC3 GLUE
   4
   5 Required properties:
   6  - compatible: should be "ti,keystone-dwc3".
   7  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
   8    with 'reg' property.
   9  - reg : Address and length of the register set for the USB subsystem on
  10    the SOC.
  11  - interrupts : The irq number of this device that is used to interrupt the
  12    MPU.
  13  - ranges: allows valid 1:1 translation between child's address space and
  14    parent's address space.
  15  - clocks: Clock IDs array as required by the controller.
  16  - clock-names: names of clocks correseponding to IDs in the clock property.
  17
  18 Sub-nodes:
  19 The dwc3 core should be added as subnode to Keystone DWC3 glue.
  20 - dwc3 :
  21    The binding details of dwc3 can be found in:
  22    Documentation/devicetree/bindings/usb/dwc3.txt
  23
  24 Example:
  25         usb: usb@2680000 {
  26                 compatible = "ti,keystone-dwc3";
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 reg = <0x2680000 0x10000>;
  30                 clocks = <&clkusb>;
  31                 clock-names = "usb";
  32                 interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
  33                 ranges;
  34                 status = "disabled";
  35
  36                 dwc3@2690000 {
  37                         compatible = "synopsys,dwc3";
  38                         reg = <0x2690000 0x70000>;
  39                         interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
  40                         usb-phy = <&usb_phy>, <&usb_phy>;
  41                 };
  42         };