Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux...
[linux/fpc-iii.git] / drivers / gpio / gpio-xlp.c
blobaa5813d2deb14c6cd6d9e775f6a6badc6c8e353c
1 /*
2 * Copyright (C) 2003-2015 Broadcom Corporation
3 * All Rights Reserved
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
15 #include <linux/gpio.h>
16 #include <linux/platform_device.h>
17 #include <linux/of_device.h>
18 #include <linux/module.h>
19 #include <linux/irq.h>
20 #include <linux/interrupt.h>
21 #include <linux/irqchip/chained_irq.h>
24 * XLP GPIO has multiple 32 bit registers for each feature where each register
25 * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
26 * require 3 32-bit registers for each feature.
27 * Here we only define offset of the first register for each feature. Offset of
28 * the registers for pins greater than 32 can be calculated as following(Use
29 * GPIO_INT_STAT as example):
31 * offset = (gpio / XLP_GPIO_REGSZ) * 4;
32 * reg_addr = addr + offset;
34 * where addr is base address of the that feature register and gpio is the pin.
36 #define GPIO_OUTPUT_EN 0x00
37 #define GPIO_PADDRV 0x08
38 #define GPIO_INT_EN00 0x18
39 #define GPIO_INT_EN10 0x20
40 #define GPIO_INT_EN20 0x28
41 #define GPIO_INT_EN30 0x30
42 #define GPIO_INT_POL 0x38
43 #define GPIO_INT_TYPE 0x40
44 #define GPIO_INT_STAT 0x48
46 #define GPIO_9XX_BYTESWAP 0X00
47 #define GPIO_9XX_CTRL 0X04
48 #define GPIO_9XX_OUTPUT_EN 0x14
49 #define GPIO_9XX_PADDRV 0x24
51 * Only for 4 interrupt enable reg are defined for now,
52 * total reg available are 12.
54 #define GPIO_9XX_INT_EN00 0x44
55 #define GPIO_9XX_INT_EN10 0x54
56 #define GPIO_9XX_INT_EN20 0x64
57 #define GPIO_9XX_INT_EN30 0x74
58 #define GPIO_9XX_INT_POL 0x104
59 #define GPIO_9XX_INT_TYPE 0x114
60 #define GPIO_9XX_INT_STAT 0x124
62 #define GPIO_3XX_INT_EN00 0x18
63 #define GPIO_3XX_INT_EN10 0x20
64 #define GPIO_3XX_INT_EN20 0x28
65 #define GPIO_3XX_INT_EN30 0x30
66 #define GPIO_3XX_INT_POL 0x78
67 #define GPIO_3XX_INT_TYPE 0x80
68 #define GPIO_3XX_INT_STAT 0x88
70 /* Interrupt type register mask */
71 #define XLP_GPIO_IRQ_TYPE_LVL 0x0
72 #define XLP_GPIO_IRQ_TYPE_EDGE 0x1
74 /* Interrupt polarity register mask */
75 #define XLP_GPIO_IRQ_POL_HIGH 0x0
76 #define XLP_GPIO_IRQ_POL_LOW 0x1
78 #define XLP_GPIO_REGSZ 32
79 #define XLP_GPIO_IRQ_BASE 768
80 #define XLP_MAX_NR_GPIO 96
82 /* XLP variants supported by this driver */
83 enum {
84 XLP_GPIO_VARIANT_XLP832 = 1,
85 XLP_GPIO_VARIANT_XLP316,
86 XLP_GPIO_VARIANT_XLP208,
87 XLP_GPIO_VARIANT_XLP980,
88 XLP_GPIO_VARIANT_XLP532
91 struct xlp_gpio_priv {
92 struct gpio_chip chip;
93 DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
94 void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
95 void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
96 void __iomem *gpio_intr_type; /* pointer to first intr type reg */
97 void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
98 void __iomem *gpio_out_en; /* pointer to first output enable reg */
99 void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
100 spinlock_t lock;
103 static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
105 u32 pos, regset;
107 pos = gpio % XLP_GPIO_REGSZ;
108 regset = (gpio / XLP_GPIO_REGSZ) * 4;
109 return !!(readl(addr + regset) & BIT(pos));
112 static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
114 u32 value, pos, regset;
116 pos = gpio % XLP_GPIO_REGSZ;
117 regset = (gpio / XLP_GPIO_REGSZ) * 4;
118 value = readl(addr + regset);
120 if (state)
121 value |= BIT(pos);
122 else
123 value &= ~BIT(pos);
125 writel(value, addr + regset);
128 static void xlp_gpio_irq_disable(struct irq_data *d)
130 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
131 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
132 unsigned long flags;
134 spin_lock_irqsave(&priv->lock, flags);
135 xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
136 __clear_bit(d->hwirq, priv->gpio_enabled_mask);
137 spin_unlock_irqrestore(&priv->lock, flags);
140 static void xlp_gpio_irq_mask_ack(struct irq_data *d)
142 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
143 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
144 unsigned long flags;
146 spin_lock_irqsave(&priv->lock, flags);
147 xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
148 xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
149 __clear_bit(d->hwirq, priv->gpio_enabled_mask);
150 spin_unlock_irqrestore(&priv->lock, flags);
153 static void xlp_gpio_irq_unmask(struct irq_data *d)
155 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
156 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
157 unsigned long flags;
159 spin_lock_irqsave(&priv->lock, flags);
160 xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
161 __set_bit(d->hwirq, priv->gpio_enabled_mask);
162 spin_unlock_irqrestore(&priv->lock, flags);
165 static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
167 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
168 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
169 int pol, irq_type;
171 switch (type) {
172 case IRQ_TYPE_EDGE_RISING:
173 irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
174 pol = XLP_GPIO_IRQ_POL_HIGH;
175 break;
176 case IRQ_TYPE_EDGE_FALLING:
177 irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
178 pol = XLP_GPIO_IRQ_POL_LOW;
179 break;
180 case IRQ_TYPE_LEVEL_HIGH:
181 irq_type = XLP_GPIO_IRQ_TYPE_LVL;
182 pol = XLP_GPIO_IRQ_POL_HIGH;
183 break;
184 case IRQ_TYPE_LEVEL_LOW:
185 irq_type = XLP_GPIO_IRQ_TYPE_LVL;
186 pol = XLP_GPIO_IRQ_POL_LOW;
187 break;
188 default:
189 return -EINVAL;
192 xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
193 xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
195 return 0;
198 static struct irq_chip xlp_gpio_irq_chip = {
199 .name = "XLP-GPIO",
200 .irq_mask_ack = xlp_gpio_irq_mask_ack,
201 .irq_disable = xlp_gpio_irq_disable,
202 .irq_set_type = xlp_gpio_set_irq_type,
203 .irq_unmask = xlp_gpio_irq_unmask,
204 .flags = IRQCHIP_ONESHOT_SAFE,
207 static void xlp_gpio_generic_handler(struct irq_desc *desc)
209 struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc);
210 struct irq_chip *irqchip = irq_desc_get_chip(desc);
211 int gpio, regoff;
212 u32 gpio_stat;
214 regoff = -1;
215 gpio_stat = 0;
217 chained_irq_enter(irqchip, desc);
218 for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
219 if (regoff != gpio / XLP_GPIO_REGSZ) {
220 regoff = gpio / XLP_GPIO_REGSZ;
221 gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
224 if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
225 generic_handle_irq(irq_find_mapping(
226 priv->chip.irqdomain, gpio));
228 chained_irq_exit(irqchip, desc);
231 static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
233 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
235 BUG_ON(gpio >= gc->ngpio);
236 xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
238 return 0;
241 static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
243 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
245 BUG_ON(gpio >= gc->ngpio);
246 xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
248 return 0;
251 static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
253 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
255 BUG_ON(gpio >= gc->ngpio);
256 return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
259 static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
261 struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
263 BUG_ON(gpio >= gc->ngpio);
264 xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
267 static const struct of_device_id xlp_gpio_of_ids[] = {
269 .compatible = "netlogic,xlp832-gpio",
270 .data = (void *)XLP_GPIO_VARIANT_XLP832,
273 .compatible = "netlogic,xlp316-gpio",
274 .data = (void *)XLP_GPIO_VARIANT_XLP316,
277 .compatible = "netlogic,xlp208-gpio",
278 .data = (void *)XLP_GPIO_VARIANT_XLP208,
281 .compatible = "netlogic,xlp980-gpio",
282 .data = (void *)XLP_GPIO_VARIANT_XLP980,
285 .compatible = "netlogic,xlp532-gpio",
286 .data = (void *)XLP_GPIO_VARIANT_XLP532,
288 { /* sentinel */ },
290 MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
292 static int xlp_gpio_probe(struct platform_device *pdev)
294 struct gpio_chip *gc;
295 struct resource *iores;
296 struct xlp_gpio_priv *priv;
297 const struct of_device_id *of_id;
298 void __iomem *gpio_base;
299 int irq_base, irq, err;
300 int ngpio;
301 u32 soc_type;
303 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
304 if (!iores)
305 return -ENODEV;
307 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
308 if (!priv)
309 return -ENOMEM;
311 gpio_base = devm_ioremap_resource(&pdev->dev, iores);
312 if (IS_ERR(gpio_base))
313 return PTR_ERR(gpio_base);
315 irq = platform_get_irq(pdev, 0);
316 if (irq < 0)
317 return irq;
319 of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
320 if (!of_id) {
321 dev_err(&pdev->dev, "Failed to get soc type!\n");
322 return -ENODEV;
325 soc_type = (uintptr_t) of_id->data;
327 switch (soc_type) {
328 case XLP_GPIO_VARIANT_XLP832:
329 priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
330 priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
331 priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
332 priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
333 priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
334 priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
335 ngpio = 41;
336 break;
337 case XLP_GPIO_VARIANT_XLP208:
338 case XLP_GPIO_VARIANT_XLP316:
339 priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
340 priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
341 priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
342 priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
343 priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
344 priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
346 ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
347 break;
348 case XLP_GPIO_VARIANT_XLP980:
349 case XLP_GPIO_VARIANT_XLP532:
350 priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
351 priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
352 priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
353 priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
354 priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
355 priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
357 ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
358 break;
359 default:
360 dev_err(&pdev->dev, "Unknown Processor type!\n");
361 return -ENODEV;
364 bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
366 gc = &priv->chip;
368 gc->owner = THIS_MODULE;
369 gc->label = dev_name(&pdev->dev);
370 gc->base = 0;
371 gc->parent = &pdev->dev;
372 gc->ngpio = ngpio;
373 gc->of_node = pdev->dev.of_node;
374 gc->direction_output = xlp_gpio_dir_output;
375 gc->direction_input = xlp_gpio_dir_input;
376 gc->set = xlp_gpio_set;
377 gc->get = xlp_gpio_get;
379 spin_lock_init(&priv->lock);
380 irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
381 if (irq_base < 0) {
382 dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
383 return -ENODEV;
386 err = gpiochip_add_data(gc, priv);
387 if (err < 0)
388 goto out_free_desc;
390 err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
391 handle_level_irq, IRQ_TYPE_NONE);
392 if (err) {
393 dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
394 goto out_gpio_remove;
397 gpiochip_set_chained_irqchip(gc, &xlp_gpio_irq_chip, irq,
398 xlp_gpio_generic_handler);
400 dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
402 return 0;
404 out_gpio_remove:
405 gpiochip_remove(gc);
406 out_free_desc:
407 irq_free_descs(irq_base, gc->ngpio);
408 return err;
411 static struct platform_driver xlp_gpio_driver = {
412 .driver = {
413 .name = "xlp-gpio",
414 .of_match_table = xlp_gpio_of_ids,
416 .probe = xlp_gpio_probe,
418 module_platform_driver(xlp_gpio_driver);
420 MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
421 MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
422 MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
423 MODULE_LICENSE("GPL v2");