drivers/media/pci/bt8xx/bttv-input.c

   1 /*
   2  *
   3  * Copyright (c) 2003 Gerd Knorr
   4  * Copyright (c) 2003 Pavel Machek
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  19  */
  20
  21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/delay.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/input.h>
  28 #include <linux/slab.h>
  29
  30 #include "bttv.h"
  31 #include "bttvp.h"
  32
  33
  34 static int ir_debug;
  35 module_param(ir_debug, int, 0644);
  36
  37 static int ir_rc5_remote_gap = 885;
  38 module_param(ir_rc5_remote_gap, int, 0644);
  39
  40 #undef dprintk
  41 #define dprintk(fmt, ...)                       \
  42 do {                                            \
  43         if (ir_debug >= 1)                      \
  44                 pr_info(fmt, ##__VA_ARGS__);    \
  45 } while (0)
  46
  47 #define DEVNAME "bttv-input"
  48
  49 #define MODULE_NAME "bttv"
  50
  51 /* ---------------------------------------------------------------------- */
  52
  53 static void ir_handle_key(struct bttv *btv)
  54 {
  55         struct bttv_ir *ir = btv->remote;
  56         u32 gpio,data;
  57
  58         /* read gpio value */
  59         gpio = bttv_gpio_read(&btv->c);
  60         if (ir->polling) {
  61                 if (ir->last_gpio == gpio)
  62                         return;
  63                 ir->last_gpio = gpio;
  64         }
  65
  66         /* extract data */
  67         data = ir_extract_bits(gpio, ir->mask_keycode);
  68         dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
  69                 gpio, data,
  70                 ir->polling               ? "poll"  : "irq",
  71                 (gpio & ir->mask_keydown) ? " down" : "",
  72                 (gpio & ir->mask_keyup)   ? " up"   : "");
  73
  74         if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
  75             (ir->mask_keyup   && !(gpio & ir->mask_keyup))) {
  76                 rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
  77         } else {
  78                 /* HACK: Probably, ir->mask_keydown is missing
  79                    for this board */
  80                 if (btv->c.type == BTTV_BOARD_WINFAST2000)
  81                         rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
  82
  83                 rc_keyup(ir->dev);
  84         }
  85 }
  86
  87 static void ir_enltv_handle_key(struct bttv *btv)
  88 {
  89         struct bttv_ir *ir = btv->remote;
  90         u32 gpio, data, keyup;
  91
  92         /* read gpio value */
  93         gpio = bttv_gpio_read(&btv->c);
  94
  95         /* extract data */
  96         data = ir_extract_bits(gpio, ir->mask_keycode);
  97
  98         /* Check if it is keyup */
  99         keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;
 100
 101         if ((ir->last_gpio & 0x7f) != data) {
 102                 dprintk("gpio=0x%x code=%d | %s\n",
 103                         gpio, data,
 104                         (gpio & ir->mask_keyup) ? " up" : "up/down");
 105
 106                 rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
 107                 if (keyup)
 108                         rc_keyup(ir->dev);
 109         } else {
 110                 if ((ir->last_gpio & 1 << 31) == keyup)
 111                         return;
 112
 113                 dprintk("(cnt) gpio=0x%x code=%d | %s\n",
 114                         gpio, data,
 115                         (gpio & ir->mask_keyup) ? " up" : "down");
 116
 117                 if (keyup)
 118                         rc_keyup(ir->dev);
 119                 else
 120                         rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
 121         }
 122
 123         ir->last_gpio = data | keyup;
 124 }
 125
 126 static int bttv_rc5_irq(struct bttv *btv);
 127
 128 void bttv_input_irq(struct bttv *btv)
 129 {
 130         struct bttv_ir *ir = btv->remote;
 131
 132         if (ir->rc5_gpio)
 133                 bttv_rc5_irq(btv);
 134         else if (!ir->polling)
 135                 ir_handle_key(btv);
 136 }
 137
 138 static void bttv_input_timer(unsigned long data)
 139 {
 140         struct bttv *btv = (struct bttv*)data;
 141         struct bttv_ir *ir = btv->remote;
 142
 143         if (btv->c.type == BTTV_BOARD_ENLTV_FM_2)
 144                 ir_enltv_handle_key(btv);
 145         else
 146                 ir_handle_key(btv);
 147         mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
 148 }
 149
 150 /*
 151  * FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
 152  * on the rc-core way. As we need to be sure that both IRQ transitions are
 153  * properly triggered, Better to touch it only with this hardware for
 154  * testing.
 155  */
 156
 157 #define RC5_START(x)    (((x) >> 12) & 0x03)
 158 #define RC5_TOGGLE(x)   (((x) >> 11) & 0x01)
 159 #define RC5_ADDR(x)     (((x) >> 6)  & 0x1f)
 160 #define RC5_INSTR(x)    (((x) >> 0)  & 0x3f)
 161
 162 /* decode raw bit pattern to RC5 code */
 163 static u32 bttv_rc5_decode(unsigned int code)
 164 {
 165         unsigned int org_code = code;
 166         unsigned int pair;
 167         unsigned int rc5 = 0;
 168         int i;
 169
 170         for (i = 0; i < 14; ++i) {
 171                 pair = code & 0x3;
 172                 code >>= 2;
 173
 174                 rc5 <<= 1;
 175                 switch (pair) {
 176                 case 0:
 177                 case 2:
 178                         break;
 179                 case 1:
 180                         rc5 |= 1;
 181                 break;
 182                 case 3:
 183                         dprintk("rc5_decode(%x) bad code\n",
 184                                 org_code);
 185                         return 0;
 186                 }
 187         }
 188         dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
 189                 "instr=%x\n", rc5, org_code, RC5_START(rc5),
 190                 RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
 191         return rc5;
 192 }
 193
 194 static void bttv_rc5_timer_end(unsigned long data)
 195 {
 196         struct bttv_ir *ir = (struct bttv_ir *)data;
 197         ktime_t tv;
 198         u32 gap, rc5, scancode;
 199         u8 toggle, command, system;
 200
 201         /* get time */
 202         tv = ktime_get();
 203
 204         gap = ktime_to_us(ktime_sub(tv, ir->base_time));
 205         /* avoid overflow with gap >1s */
 206         if (gap > USEC_PER_SEC) {
 207                 gap = 200000;
 208         }
 209         /* signal we're ready to start a new code */
 210         ir->active = false;
 211
 212         /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
 213         if (gap < 28000) {
 214                 dprintk("spurious timer_end\n");
 215                 return;
 216         }
 217
 218         if (ir->last_bit < 20) {
 219                 /* ignore spurious codes (caused by light/other remotes) */
 220                 dprintk("short code: %x\n", ir->code);
 221                 return;
 222         }
 223
 224         ir->code = (ir->code << ir->shift_by) | 1;
 225         rc5 = bttv_rc5_decode(ir->code);
 226
 227         toggle = RC5_TOGGLE(rc5);
 228         system = RC5_ADDR(rc5);
 229         command = RC5_INSTR(rc5);
 230
 231         switch (RC5_START(rc5)) {
 232         case 0x3:
 233                 break;
 234         case 0x2:
 235                 command += 0x40;
 236                 break;
 237         default:
 238                 return;
 239         }
 240
 241         scancode = RC_SCANCODE_RC5(system, command);
 242         rc_keydown(ir->dev, RC_TYPE_RC5, scancode, toggle);
 243         dprintk("scancode %x, toggle %x\n", scancode, toggle);
 244 }
 245
 246 static int bttv_rc5_irq(struct bttv *btv)
 247 {
 248         struct bttv_ir *ir = btv->remote;
 249         ktime_t tv;
 250         u32 gpio;
 251         u32 gap;
 252         unsigned long current_jiffies;
 253
 254         /* read gpio port */
 255         gpio = bttv_gpio_read(&btv->c);
 256
 257         /* get time of bit */
 258         current_jiffies = jiffies;
 259         tv = ktime_get();
 260
 261         gap = ktime_to_us(ktime_sub(tv, ir->base_time));
 262         /* avoid overflow with gap >1s */
 263         if (gap > USEC_PER_SEC) {
 264                 gap = 200000;
 265         }
 266
 267         dprintk("RC5 IRQ: gap %d us for %s\n",
 268                 gap, (gpio & 0x20) ? "mark" : "space");
 269
 270         /* remote IRQ? */
 271         if (!(gpio & 0x20))
 272                 return 0;
 273
 274         /* active code => add bit */
 275         if (ir->active) {
 276                 /* only if in the code (otherwise spurious IRQ or timer
 277                    late) */
 278                 if (ir->last_bit < 28) {
 279                         ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
 280                             ir_rc5_remote_gap;
 281                         ir->code |= 1 << ir->last_bit;
 282                 }
 283                 /* starting new code */
 284         } else {
 285                 ir->active = true;
 286                 ir->code = 0;
 287                 ir->base_time = tv;
 288                 ir->last_bit = 0;
 289
 290                 mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30));
 291         }
 292
 293         /* toggle GPIO pin 4 to reset the irq */
 294         bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
 295         bttv_gpio_write(&btv->c, gpio | (1 << 4));
 296         return 1;
 297 }
 298
 299 /* ---------------------------------------------------------------------- */
 300
 301 static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
 302 {
 303         if (ir->polling) {
 304                 setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
 305                 ir->timer.expires  = jiffies + msecs_to_jiffies(1000);
 306                 add_timer(&ir->timer);
 307         } else if (ir->rc5_gpio) {
 308                 /* set timer_end for code completion */
 309                 setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
 310                 ir->shift_by = 1;
 311                 ir->rc5_remote_gap = ir_rc5_remote_gap;
 312         }
 313 }
 314
 315 static void bttv_ir_stop(struct bttv *btv)
 316 {
 317         if (btv->remote->polling)
 318                 del_timer_sync(&btv->remote->timer);
 319
 320         if (btv->remote->rc5_gpio) {
 321                 u32 gpio;
 322
 323                 del_timer_sync(&btv->remote->timer);
 324
 325                 gpio = bttv_gpio_read(&btv->c);
 326                 bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
 327         }
 328 }
 329
 330 /*
 331  * Get_key functions used by I2C remotes
 332  */
 333
 334 static int get_key_pv951(struct IR_i2c *ir, enum rc_type *protocol,
 335                          u32 *scancode, u8 *toggle)
 336 {
 337         unsigned char b;
 338
 339         /* poll IR chip */
 340         if (1 != i2c_master_recv(ir->c, &b, 1)) {
 341                 dprintk("read error\n");
 342                 return -EIO;
 343         }
 344
 345         /* ignore 0xaa */
 346         if (b==0xaa)
 347                 return 0;
 348         dprintk("key %02x\n", b);
 349
 350         /*
 351          * NOTE:
 352          * lirc_i2c maps the pv951 code as:
 353          *      addr = 0x61D6
 354          *      cmd = bit_reverse (b)
 355          * So, it seems that this device uses NEC extended
 356          * I decided to not fix the table, due to two reasons:
 357          *      1) Without the actual device, this is only a guess;
 358          *      2) As the addr is not reported via I2C, nor can be changed,
 359          *         the device is bound to the vendor-provided RC.
 360          */
 361
 362         *protocol = RC_TYPE_UNKNOWN;
 363         *scancode = b;
 364         *toggle = 0;
 365         return 1;
 366 }
 367
 368 /* Instantiate the I2C IR receiver device, if present */
 369 void init_bttv_i2c_ir(struct bttv *btv)
 370 {
 371         const unsigned short addr_list[] = {
 372                 0x1a, 0x18, 0x64, 0x30, 0x71,
 373                 I2C_CLIENT_END
 374         };
 375         struct i2c_board_info info;
 376         struct i2c_client *i2c_dev;
 377
 378         if (0 != btv->i2c_rc)
 379                 return;
 380
 381         memset(&info, 0, sizeof(struct i2c_board_info));
 382         memset(&btv->init_data, 0, sizeof(btv->init_data));
 383         strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 384
 385         switch (btv->c.type) {
 386         case BTTV_BOARD_PV951:
 387                 btv->init_data.name = "PV951";
 388                 btv->init_data.get_key = get_key_pv951;
 389                 btv->init_data.ir_codes = RC_MAP_PV951;
 390                 info.addr = 0x4b;
 391                 break;
 392         }
 393
 394         if (btv->init_data.name) {
 395                 info.platform_data = &btv->init_data;
 396                 i2c_dev = i2c_new_device(&btv->c.i2c_adap, &info);
 397         } else {
 398                 /*
 399                  * The external IR receiver is at i2c address 0x34 (0x35 for
 400                  * reads).  Future Hauppauge cards will have an internal
 401                  * receiver at 0x30 (0x31 for reads).  In theory, both can be
 402                  * fitted, and Hauppauge suggest an external overrides an
 403                  * internal.
 404                  * That's why we probe 0x1a (~0x34) first. CB
 405                  */
 406                 i2c_dev = i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
 407         }
 408         if (NULL == i2c_dev)
 409                 return;
 410
 411 #if defined(CONFIG_MODULES) && defined(MODULE)
 412         request_module("ir-kbd-i2c");
 413 #endif
 414 }
 415
 416 int bttv_input_init(struct bttv *btv)
 417 {
 418         struct bttv_ir *ir;
 419         char *ir_codes = NULL;
 420         struct rc_dev *rc;
 421         int err = -ENOMEM;
 422
 423         if (!btv->has_remote)
 424                 return -ENODEV;
 425
 426         ir = kzalloc(sizeof(*ir),GFP_KERNEL);
 427         rc = rc_allocate_device();
 428         if (!ir || !rc)
 429                 goto err_out_free;
 430
 431         /* detect & configure */
 432         switch (btv->c.type) {
 433         case BTTV_BOARD_AVERMEDIA:
 434         case BTTV_BOARD_AVPHONE98:
 435         case BTTV_BOARD_AVERMEDIA98:
 436                 ir_codes         = RC_MAP_AVERMEDIA;
 437                 ir->mask_keycode = 0xf88000;
 438                 ir->mask_keydown = 0x010000;
 439                 ir->polling      = 50; // ms
 440                 break;
 441
 442         case BTTV_BOARD_AVDVBT_761:
 443         case BTTV_BOARD_AVDVBT_771:
 444                 ir_codes         = RC_MAP_AVERMEDIA_DVBT;
 445                 ir->mask_keycode = 0x0f00c0;
 446                 ir->mask_keydown = 0x000020;
 447                 ir->polling      = 50; // ms
 448                 break;
 449
 450         case BTTV_BOARD_PXELVWPLTVPAK:
 451                 ir_codes         = RC_MAP_PIXELVIEW;
 452                 ir->mask_keycode = 0x003e00;
 453                 ir->mask_keyup   = 0x010000;
 454                 ir->polling      = 50; // ms
 455                 break;
 456         case BTTV_BOARD_PV_M4900:
 457         case BTTV_BOARD_PV_BT878P_9B:
 458         case BTTV_BOARD_PV_BT878P_PLUS:
 459                 ir_codes         = RC_MAP_PIXELVIEW;
 460                 ir->mask_keycode = 0x001f00;
 461                 ir->mask_keyup   = 0x008000;
 462                 ir->polling      = 50; // ms
 463                 break;
 464
 465         case BTTV_BOARD_WINFAST2000:
 466                 ir_codes         = RC_MAP_WINFAST;
 467                 ir->mask_keycode = 0x1f8;
 468                 break;
 469         case BTTV_BOARD_MAGICTVIEW061:
 470         case BTTV_BOARD_MAGICTVIEW063:
 471                 ir_codes         = RC_MAP_WINFAST;
 472                 ir->mask_keycode = 0x0008e000;
 473                 ir->mask_keydown = 0x00200000;
 474                 break;
 475         case BTTV_BOARD_APAC_VIEWCOMP:
 476                 ir_codes         = RC_MAP_APAC_VIEWCOMP;
 477                 ir->mask_keycode = 0x001f00;
 478                 ir->mask_keyup   = 0x008000;
 479                 ir->polling      = 50; // ms
 480                 break;
 481         case BTTV_BOARD_ASKEY_CPH03X:
 482         case BTTV_BOARD_CONCEPTRONIC_CTVFMI2:
 483         case BTTV_BOARD_CONTVFMI:
 484         case BTTV_BOARD_KWORLD_VSTREAM_XPERT:
 485                 ir_codes         = RC_MAP_PIXELVIEW;
 486                 ir->mask_keycode = 0x001F00;
 487                 ir->mask_keyup   = 0x006000;
 488                 ir->polling      = 50; // ms
 489                 break;
 490         case BTTV_BOARD_NEBULA_DIGITV:
 491                 ir_codes         = RC_MAP_NEBULA;
 492                 ir->rc5_gpio     = true;
 493                 break;
 494         case BTTV_BOARD_MACHTV_MAGICTV:
 495                 ir_codes         = RC_MAP_APAC_VIEWCOMP;
 496                 ir->mask_keycode = 0x001F00;
 497                 ir->mask_keyup   = 0x004000;
 498                 ir->polling      = 50; /* ms */
 499                 break;
 500         case BTTV_BOARD_KOZUMI_KTV_01C:
 501                 ir_codes         = RC_MAP_PCTV_SEDNA;
 502                 ir->mask_keycode = 0x001f00;
 503                 ir->mask_keyup   = 0x006000;
 504                 ir->polling      = 50; /* ms */
 505                 break;
 506         case BTTV_BOARD_ENLTV_FM_2:
 507                 ir_codes         = RC_MAP_ENCORE_ENLTV2;
 508                 ir->mask_keycode = 0x00fd00;
 509                 ir->mask_keyup   = 0x000080;
 510                 ir->polling      = 1; /* ms */
 511                 ir->last_gpio    = ir_extract_bits(bttv_gpio_read(&btv->c),
 512                                                    ir->mask_keycode);
 513                 break;
 514         }
 515
 516         if (!ir_codes) {
 517                 dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
 518                 err = -ENODEV;
 519                 goto err_out_free;
 520         }
 521
 522         if (ir->rc5_gpio) {
 523                 u32 gpio;
 524                 /* enable remote irq */
 525                 bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4);
 526                 gpio = bttv_gpio_read(&btv->c);
 527                 bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
 528                 bttv_gpio_write(&btv->c, gpio | (1 << 4));
 529         } else {
 530                 /* init hardware-specific stuff */
 531                 bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0);
 532         }
 533
 534         /* init input device */
 535         ir->dev = rc;
 536
 537         snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
 538                  btv->c.type);
 539         snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 540                  pci_name(btv->c.pci));
 541
 542         rc->input_name = ir->name;
 543         rc->input_phys = ir->phys;
 544         rc->input_id.bustype = BUS_PCI;
 545         rc->input_id.version = 1;
 546         if (btv->c.pci->subsystem_vendor) {
 547                 rc->input_id.vendor  = btv->c.pci->subsystem_vendor;
 548                 rc->input_id.product = btv->c.pci->subsystem_device;
 549         } else {
 550                 rc->input_id.vendor  = btv->c.pci->vendor;
 551                 rc->input_id.product = btv->c.pci->device;
 552         }
 553         rc->dev.parent = &btv->c.pci->dev;
 554         rc->map_name = ir_codes;
 555         rc->driver_name = MODULE_NAME;
 556
 557         btv->remote = ir;
 558         bttv_ir_start(btv, ir);
 559
 560         /* all done */
 561         err = rc_register_device(rc);
 562         if (err)
 563                 goto err_out_stop;
 564
 565         return 0;
 566
 567  err_out_stop:
 568         bttv_ir_stop(btv);
 569         btv->remote = NULL;
 570  err_out_free:
 571         rc_free_device(rc);
 572         kfree(ir);
 573         return err;
 574 }
 575
 576 void bttv_input_fini(struct bttv *btv)
 577 {
 578         if (btv->remote == NULL)
 579                 return;
 580
 581         bttv_ir_stop(btv);
 582         rc_unregister_device(btv->remote->dev);
 583         kfree(btv->remote);
 584         btv->remote = NULL;
 585 }