2 init/start/stop/exit stream functions
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 * Author: Kevin Thayer <nufan_wfk at yahoo dot com>
25 * This file will hold API related functions, both internal (firmware api)
26 * and external (v4l2, etc)
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
36 #include "ivtv-driver.h"
37 #include "ivtv-fileops.h"
38 #include "ivtv-queue.h"
39 #include "ivtv-mailbox.h"
40 #include "ivtv-ioctl.h"
43 #include "ivtv-cards.h"
44 #include "ivtv-streams.h"
45 #include "ivtv-firmware.h"
46 #include <media/v4l2-event.h>
48 static const struct v4l2_file_operations ivtv_v4l2_enc_fops
= {
50 .read
= ivtv_v4l2_read
,
51 .write
= ivtv_v4l2_write
,
52 .open
= ivtv_v4l2_open
,
53 .unlocked_ioctl
= video_ioctl2
,
54 .release
= ivtv_v4l2_close
,
55 .poll
= ivtv_v4l2_enc_poll
,
58 static const struct v4l2_file_operations ivtv_v4l2_dec_fops
= {
60 .read
= ivtv_v4l2_read
,
61 .write
= ivtv_v4l2_write
,
62 .open
= ivtv_v4l2_open
,
63 .unlocked_ioctl
= video_ioctl2
,
64 .release
= ivtv_v4l2_close
,
65 .poll
= ivtv_v4l2_dec_poll
,
68 static const struct v4l2_file_operations ivtv_v4l2_radio_fops
= {
70 .open
= ivtv_v4l2_open
,
71 .unlocked_ioctl
= video_ioctl2
,
72 .release
= ivtv_v4l2_close
,
73 .poll
= ivtv_v4l2_enc_poll
,
76 #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
77 #define IVTV_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register pcm v4l2 minors on */
78 #define IVTV_V4L2_ENC_YUV_OFFSET 32 /* offset from 0 to register yuv v4l2 minors on */
79 #define IVTV_V4L2_DEC_YUV_OFFSET 48 /* offset from 0 to register decoder yuv v4l2 minors on */
80 #define IVTV_V4L2_DEC_VBI_OFFSET 8 /* offset from 0 to register decoder vbi input v4l2 minors on */
81 #define IVTV_V4L2_DEC_VOUT_OFFSET 16 /* offset from 0 to register vbi output v4l2 minors on */
89 const struct v4l2_file_operations
*fops
;
90 } ivtv_stream_info
[] = {
91 { /* IVTV_ENC_STREAM_TYPE_MPG */
94 PCI_DMA_FROMDEVICE
, 0,
95 V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_TUNER
|
96 V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
,
99 { /* IVTV_ENC_STREAM_TYPE_YUV */
101 VFL_TYPE_GRABBER
, IVTV_V4L2_ENC_YUV_OFFSET
,
102 PCI_DMA_FROMDEVICE
, 0,
103 V4L2_CAP_VIDEO_CAPTURE
| V4L2_CAP_TUNER
|
104 V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
,
107 { /* IVTV_ENC_STREAM_TYPE_VBI */
110 PCI_DMA_FROMDEVICE
, 0,
111 V4L2_CAP_VBI_CAPTURE
| V4L2_CAP_SLICED_VBI_CAPTURE
| V4L2_CAP_TUNER
|
112 V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
,
115 { /* IVTV_ENC_STREAM_TYPE_PCM */
117 VFL_TYPE_GRABBER
, IVTV_V4L2_ENC_PCM_OFFSET
,
118 PCI_DMA_FROMDEVICE
, 0,
119 V4L2_CAP_TUNER
| V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
,
122 { /* IVTV_ENC_STREAM_TYPE_RAD */
126 V4L2_CAP_RADIO
| V4L2_CAP_TUNER
,
127 &ivtv_v4l2_radio_fops
129 { /* IVTV_DEC_STREAM_TYPE_MPG */
131 VFL_TYPE_GRABBER
, IVTV_V4L2_DEC_MPG_OFFSET
,
133 V4L2_CAP_VIDEO_OUTPUT
| V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
|
134 V4L2_CAP_VIDEO_OUTPUT_OVERLAY
,
137 { /* IVTV_DEC_STREAM_TYPE_VBI */
139 VFL_TYPE_VBI
, IVTV_V4L2_DEC_VBI_OFFSET
,
141 V4L2_CAP_SLICED_VBI_CAPTURE
| V4L2_CAP_READWRITE
,
144 { /* IVTV_DEC_STREAM_TYPE_VOUT */
146 VFL_TYPE_VBI
, IVTV_V4L2_DEC_VOUT_OFFSET
,
148 V4L2_CAP_SLICED_VBI_OUTPUT
| V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
,
151 { /* IVTV_DEC_STREAM_TYPE_YUV */
153 VFL_TYPE_GRABBER
, IVTV_V4L2_DEC_YUV_OFFSET
,
155 V4L2_CAP_VIDEO_OUTPUT
| V4L2_CAP_AUDIO
| V4L2_CAP_READWRITE
|
156 V4L2_CAP_VIDEO_OUTPUT_OVERLAY
,
161 static void ivtv_stream_init(struct ivtv
*itv
, int type
)
163 struct ivtv_stream
*s
= &itv
->streams
[type
];
165 /* we need to keep vdev, so restore it afterwards */
166 memset(s
, 0, sizeof(*s
));
168 /* initialize ivtv_stream fields */
171 s
->name
= ivtv_stream_info
[type
].name
;
172 s
->caps
= ivtv_stream_info
[type
].v4l2_caps
;
174 if (ivtv_stream_info
[type
].pio
)
175 s
->dma
= PCI_DMA_NONE
;
177 s
->dma
= ivtv_stream_info
[type
].dma
;
178 s
->buf_size
= itv
->stream_buf_size
[type
];
180 s
->buffers
= (itv
->options
.kilobytes
[type
] * 1024 + s
->buf_size
- 1) / s
->buf_size
;
181 spin_lock_init(&s
->qlock
);
182 init_waitqueue_head(&s
->waitq
);
183 s
->sg_handle
= IVTV_DMA_UNMAPPED
;
184 ivtv_queue_init(&s
->q_free
);
185 ivtv_queue_init(&s
->q_full
);
186 ivtv_queue_init(&s
->q_dma
);
187 ivtv_queue_init(&s
->q_predma
);
188 ivtv_queue_init(&s
->q_io
);
191 static int ivtv_prep_dev(struct ivtv
*itv
, int type
)
193 struct ivtv_stream
*s
= &itv
->streams
[type
];
194 int num_offset
= ivtv_stream_info
[type
].num_offset
;
195 int num
= itv
->instance
+ ivtv_first_minor
+ num_offset
;
197 /* These four fields are always initialized. If vdev.v4l2_dev == NULL, then
198 this stream is not in use. In that case no other fields but these
200 s
->vdev
.v4l2_dev
= NULL
;
203 s
->name
= ivtv_stream_info
[type
].name
;
205 /* Check whether the radio is supported */
206 if (type
== IVTV_ENC_STREAM_TYPE_RAD
&& !(itv
->v4l2_cap
& V4L2_CAP_RADIO
))
208 if (type
>= IVTV_DEC_STREAM_TYPE_MPG
&& !(itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
))
211 /* User explicitly selected 0 buffers for these streams, so don't
213 if (ivtv_stream_info
[type
].dma
!= PCI_DMA_NONE
&&
214 itv
->options
.kilobytes
[type
] == 0) {
215 IVTV_INFO("Disabled %s device\n", ivtv_stream_info
[type
].name
);
219 ivtv_stream_init(itv
, type
);
221 snprintf(s
->vdev
.name
, sizeof(s
->vdev
.name
), "%s %s",
222 itv
->v4l2_dev
.name
, s
->name
);
225 s
->vdev
.v4l2_dev
= &itv
->v4l2_dev
;
226 if (ivtv_stream_info
[type
].v4l2_caps
&
227 (V4L2_CAP_VIDEO_OUTPUT
| V4L2_CAP_SLICED_VBI_OUTPUT
))
228 s
->vdev
.vfl_dir
= VFL_DIR_TX
;
229 s
->vdev
.fops
= ivtv_stream_info
[type
].fops
;
230 s
->vdev
.ctrl_handler
= itv
->v4l2_dev
.ctrl_handler
;
231 s
->vdev
.release
= video_device_release_empty
;
232 s
->vdev
.tvnorms
= V4L2_STD_ALL
;
233 s
->vdev
.lock
= &itv
->serialize_lock
;
234 if (s
->type
== IVTV_DEC_STREAM_TYPE_VBI
) {
235 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_S_AUDIO
);
236 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_G_AUDIO
);
237 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_ENUMAUDIO
);
238 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_ENUMINPUT
);
239 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_S_INPUT
);
240 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_G_INPUT
);
241 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_S_FREQUENCY
);
242 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_G_FREQUENCY
);
243 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_S_TUNER
);
244 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_G_TUNER
);
245 v4l2_disable_ioctl(&s
->vdev
, VIDIOC_S_STD
);
247 ivtv_set_funcs(&s
->vdev
);
251 /* Initialize v4l2 variables and prepare v4l2 devices */
252 int ivtv_streams_setup(struct ivtv
*itv
)
256 /* Setup V4L2 Devices */
257 for (type
= 0; type
< IVTV_MAX_STREAMS
; type
++) {
259 if (ivtv_prep_dev(itv
, type
))
262 if (itv
->streams
[type
].vdev
.v4l2_dev
== NULL
)
265 /* Allocate Stream */
266 if (ivtv_stream_alloc(&itv
->streams
[type
]))
269 if (type
== IVTV_MAX_STREAMS
)
272 /* One or more streams could not be initialized. Clean 'em all up. */
273 ivtv_streams_cleanup(itv
);
277 static int ivtv_reg_dev(struct ivtv
*itv
, int type
)
279 struct ivtv_stream
*s
= &itv
->streams
[type
];
280 int vfl_type
= ivtv_stream_info
[type
].vfl_type
;
284 if (s
->vdev
.v4l2_dev
== NULL
)
288 /* card number + user defined offset + device offset */
289 if (type
!= IVTV_ENC_STREAM_TYPE_MPG
) {
290 struct ivtv_stream
*s_mpg
= &itv
->streams
[IVTV_ENC_STREAM_TYPE_MPG
];
292 if (s_mpg
->vdev
.v4l2_dev
)
293 num
= s_mpg
->vdev
.num
+ ivtv_stream_info
[type
].num_offset
;
295 video_set_drvdata(&s
->vdev
, s
);
297 /* Register device. First try the desired minor, then any free one. */
298 if (video_register_device_no_warn(&s
->vdev
, vfl_type
, num
)) {
299 IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
303 name
= video_device_node_name(&s
->vdev
);
306 case VFL_TYPE_GRABBER
:
307 IVTV_INFO("Registered device %s for %s (%d kB)\n",
308 name
, s
->name
, itv
->options
.kilobytes
[type
]);
311 IVTV_INFO("Registered device %s for %s\n",
315 if (itv
->options
.kilobytes
[type
])
316 IVTV_INFO("Registered device %s for %s (%d kB)\n",
317 name
, s
->name
, itv
->options
.kilobytes
[type
]);
319 IVTV_INFO("Registered device %s for %s\n",
326 /* Register v4l2 devices */
327 int ivtv_streams_register(struct ivtv
*itv
)
332 /* Register V4L2 devices */
333 for (type
= 0; type
< IVTV_MAX_STREAMS
; type
++)
334 err
|= ivtv_reg_dev(itv
, type
);
339 /* One or more streams could not be initialized. Clean 'em all up. */
340 ivtv_streams_cleanup(itv
);
344 /* Unregister v4l2 devices */
345 void ivtv_streams_cleanup(struct ivtv
*itv
)
349 /* Teardown all streams */
350 for (type
= 0; type
< IVTV_MAX_STREAMS
; type
++) {
351 struct video_device
*vdev
= &itv
->streams
[type
].vdev
;
353 if (vdev
->v4l2_dev
== NULL
)
356 video_unregister_device(vdev
);
357 ivtv_stream_free(&itv
->streams
[type
]);
358 itv
->streams
[type
].vdev
.v4l2_dev
= NULL
;
362 static void ivtv_vbi_setup(struct ivtv
*itv
)
364 int raw
= ivtv_raw_vbi(itv
);
365 u32 data
[CX2341X_MBOX_MAX_DATA
];
370 ivtv_vapi(itv
, CX2341X_ENC_SET_VBI_LINE
, 5, 0xffff , 0, 0, 0, 0);
372 /* setup VBI registers */
374 v4l2_subdev_call(itv
->sd_video
, vbi
, s_raw_fmt
, &itv
->vbi
.in
.fmt
.vbi
);
376 v4l2_subdev_call(itv
->sd_video
, vbi
, s_sliced_fmt
, &itv
->vbi
.in
.fmt
.sliced
);
378 /* determine number of lines and total number of VBI bytes.
379 A raw line takes 1443 bytes: 2 * 720 + 4 byte frame header - 1
380 The '- 1' byte is probably an unused U or V byte. Or something...
381 A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal
382 header, 42 data bytes + checksum (to be confirmed) */
384 lines
= itv
->vbi
.count
* 2;
386 lines
= itv
->is_60hz
? 24 : 38;
387 if (itv
->is_60hz
&& (itv
->hw_flags
& IVTV_HW_CX25840
))
391 itv
->vbi
.enc_size
= lines
* (raw
? itv
->vbi
.raw_size
: itv
->vbi
.sliced_size
);
393 /* Note: sliced vs raw flag doesn't seem to have any effect
394 TODO: check mode (0x02) value with older ivtv versions. */
395 data
[0] = raw
| 0x02 | (0xbd << 8);
397 /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
399 /* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
400 data
[2] = raw
? 4 : 4 * (itv
->vbi
.raw_size
/ itv
->vbi
.enc_size
);
401 /* The start/stop codes determine which VBI lines end up in the raw VBI data area.
402 The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
403 is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
404 code. These values for raw VBI are obtained from a driver disassembly. The sliced
405 start/stop codes was deduced from this, but they do not appear in the driver.
406 Other code pairs that I found are: 0x250E6249/0x13545454 and 0x25256262/0x38137F54.
407 However, I have no idea what these values are for. */
408 if (itv
->hw_flags
& IVTV_HW_CX25840
) {
409 /* Setup VBI for the cx25840 digitizer */
411 data
[3] = 0x20602060;
412 data
[4] = 0x30703070;
414 data
[3] = 0xB0F0B0F0;
415 data
[4] = 0xA0E0A0E0;
417 /* Lines per frame */
420 data
[6] = (raw
? itv
->vbi
.raw_size
: itv
->vbi
.sliced_size
);
422 /* Setup VBI for the saa7115 digitizer */
424 data
[3] = 0x25256262;
425 data
[4] = 0x387F7F7F;
427 data
[3] = 0xABABECEC;
428 data
[4] = 0xB6F1F1F1;
430 /* Lines per frame */
433 data
[6] = itv
->vbi
.enc_size
/ lines
;
437 "Setup VBI API header 0x%08x pkts %d buffs %d ln %d sz %d\n",
438 data
[0], data
[1], data
[2], data
[5], data
[6]);
440 ivtv_api(itv
, CX2341X_ENC_SET_VBI_CONFIG
, 7, data
);
442 /* returns the VBI encoder memory area. */
443 itv
->vbi
.enc_start
= data
[2];
444 itv
->vbi
.fpi
= data
[0];
448 IVTV_DEBUG_INFO("Setup VBI start 0x%08x frames %d fpi %d\n",
449 itv
->vbi
.enc_start
, data
[1], itv
->vbi
.fpi
);
452 Note that the sliced argument seems to have no effect. */
453 for (i
= 2; i
<= 24; i
++) {
457 valid
= i
>= 10 && i
< 22;
459 valid
= i
>= 6 && i
< 24;
461 ivtv_vapi(itv
, CX2341X_ENC_SET_VBI_LINE
, 5, i
- 1,
463 ivtv_vapi(itv
, CX2341X_ENC_SET_VBI_LINE
, 5, (i
- 1) | 0x80000000,
467 /* Remaining VBI questions:
468 - Is it possible to select particular VBI lines only for inclusion in the MPEG
469 stream? Currently you can only get the first X lines.
470 - Is mixed raw and sliced VBI possible?
471 - What's the meaning of the raw/sliced flag?
472 - What's the meaning of params 2, 3 & 4 of the Select VBI command? */
475 int ivtv_start_v4l2_encode_stream(struct ivtv_stream
*s
)
477 u32 data
[CX2341X_MBOX_MAX_DATA
];
478 struct ivtv
*itv
= s
->itv
;
479 int captype
= 0, subtype
= 0;
480 int enable_passthrough
= 0;
482 if (s
->vdev
.v4l2_dev
== NULL
)
485 IVTV_DEBUG_INFO("Start encoder stream %s\n", s
->name
);
488 case IVTV_ENC_STREAM_TYPE_MPG
:
492 /* Stop Passthrough */
493 if (itv
->output_mode
== OUT_PASSTHROUGH
) {
494 ivtv_passthrough_mode(itv
, 0);
495 enable_passthrough
= 1;
497 itv
->mpg_data_received
= itv
->vbi_data_inserted
= 0;
498 itv
->dualwatch_jiffies
= jiffies
;
499 itv
->dualwatch_stereo_mode
= v4l2_ctrl_g_ctrl(itv
->cxhdl
.audio_mode
);
500 itv
->search_pack_header
= 0;
503 case IVTV_ENC_STREAM_TYPE_YUV
:
504 if (itv
->output_mode
== OUT_PASSTHROUGH
) {
506 subtype
= 11; /* video+audio+decoder */
512 case IVTV_ENC_STREAM_TYPE_PCM
:
516 case IVTV_ENC_STREAM_TYPE_VBI
:
521 itv
->vbi
.inserted_frame
= 0;
522 memset(itv
->vbi
.sliced_mpeg_size
,
523 0, sizeof(itv
->vbi
.sliced_mpeg_size
));
528 s
->subtype
= subtype
;
529 s
->buffers_stolen
= 0;
531 /* Clear Streamoff flags in case left from last capture */
532 clear_bit(IVTV_F_S_STREAMOFF
, &s
->s_flags
);
534 if (atomic_read(&itv
->capturing
) == 0) {
537 /* Always use frame based mode. Experiments have demonstrated that byte
538 stream based mode results in dropped frames and corruption. Not often,
539 but occasionally. Many thanks go to Leonard Orb who spent a lot of
540 effort and time trying to trace the cause of the drop outs. */
541 /* 1 frame per DMA */
542 /*ivtv_vapi(itv, CX2341X_ENC_SET_DMA_BLOCK_SIZE, 2, 128, 0); */
543 ivtv_vapi(itv
, CX2341X_ENC_SET_DMA_BLOCK_SIZE
, 2, 1, 1);
545 /* Stuff from Windows, we don't know what it is */
546 ivtv_vapi(itv
, CX2341X_ENC_SET_VERT_CROP_LINE
, 1, 0);
547 /* According to the docs, this should be correct. However, this is
548 untested. I don't dare enable this without having tested it.
549 Only very few old cards actually have this hardware combination.
550 ivtv_vapi(itv, CX2341X_ENC_SET_VERT_CROP_LINE, 1,
551 ((itv->hw_flags & IVTV_HW_SAA7114) && itv->is_60hz) ? 10001 : 0);
553 ivtv_vapi(itv
, CX2341X_ENC_MISC
, 2, 3, !itv
->has_cx23415
);
554 ivtv_vapi(itv
, CX2341X_ENC_MISC
, 2, 8, 0);
555 ivtv_vapi(itv
, CX2341X_ENC_MISC
, 2, 4, 1);
556 ivtv_vapi(itv
, CX2341X_ENC_MISC
, 1, 12);
558 /* assign placeholder */
559 ivtv_vapi(itv
, CX2341X_ENC_SET_PLACEHOLDER
, 12,
560 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
562 if (itv
->card
->hw_all
& (IVTV_HW_SAA7115
| IVTV_HW_SAA717X
))
564 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
569 ivtv_vapi(itv
, CX2341X_ENC_SET_NUM_VSYNC_LINES
, 2, digitizer
, digitizer
);
572 if (itv
->v4l2_cap
& V4L2_CAP_VBI_CAPTURE
) {
576 /* assign program index info. Mask 7: select I/P/B, Num_req: 400 max */
577 ivtv_vapi_result(itv
, data
, CX2341X_ENC_SET_PGM_INDEX_INFO
, 2, 7, 400);
578 itv
->pgm_info_offset
= data
[0];
579 itv
->pgm_info_num
= data
[1];
580 itv
->pgm_info_write_idx
= 0;
581 itv
->pgm_info_read_idx
= 0;
583 IVTV_DEBUG_INFO("PGM Index at 0x%08x with %d elements\n",
584 itv
->pgm_info_offset
, itv
->pgm_info_num
);
586 /* Setup API for Stream */
587 cx2341x_handler_setup(&itv
->cxhdl
);
589 /* mute if capturing radio */
590 if (test_bit(IVTV_F_I_RADIO_USER
, &itv
->i_flags
))
591 ivtv_vapi(itv
, CX2341X_ENC_MUTE_VIDEO
, 1,
592 1 | (v4l2_ctrl_g_ctrl(itv
->cxhdl
.video_mute_yuv
) << 8));
596 if (itv
->has_cx23415
&& !test_and_set_bit(IVTV_F_I_DIG_RST
, &itv
->i_flags
)) {
597 /* event notification (on) */
598 ivtv_vapi(itv
, CX2341X_ENC_SET_EVENT_NOTIFICATION
, 4, 0, 1, IVTV_IRQ_ENC_VIM_RST
, -1);
599 ivtv_clear_irq_mask(itv
, IVTV_IRQ_ENC_VIM_RST
);
602 if (atomic_read(&itv
->capturing
) == 0) {
603 /* Clear all Pending Interrupts */
604 ivtv_set_irq_mask(itv
, IVTV_IRQ_MASK_CAPTURE
);
606 clear_bit(IVTV_F_I_EOS
, &itv
->i_flags
);
608 cx2341x_handler_set_busy(&itv
->cxhdl
, 1);
610 /* Initialize Digitizer for Capture */
611 /* Avoid tinny audio problem - ensure audio clocks are going */
612 v4l2_subdev_call(itv
->sd_audio
, audio
, s_stream
, 1);
613 /* Avoid unpredictable PCI bus hang - disable video clocks */
614 v4l2_subdev_call(itv
->sd_video
, video
, s_stream
, 0);
615 ivtv_msleep_timeout(300, 0);
616 ivtv_vapi(itv
, CX2341X_ENC_INITIALIZE_INPUT
, 0);
617 v4l2_subdev_call(itv
->sd_video
, video
, s_stream
, 1);
621 if (ivtv_vapi(itv
, CX2341X_ENC_START_CAPTURE
, 2, captype
, subtype
))
623 IVTV_DEBUG_WARN( "Error starting capture!\n");
627 /* Start Passthrough */
628 if (enable_passthrough
) {
629 ivtv_passthrough_mode(itv
, 1);
632 if (s
->type
== IVTV_ENC_STREAM_TYPE_VBI
)
633 ivtv_clear_irq_mask(itv
, IVTV_IRQ_ENC_VBI_CAP
);
635 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_CAPTURE
);
637 /* you're live! sit back and await interrupts :) */
638 atomic_inc(&itv
->capturing
);
641 EXPORT_SYMBOL(ivtv_start_v4l2_encode_stream
);
643 static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream
*s
)
645 u32 data
[CX2341X_MBOX_MAX_DATA
];
646 struct ivtv
*itv
= s
->itv
;
651 if (s
->vdev
.v4l2_dev
== NULL
)
654 IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
656 width
= itv
->cxhdl
.width
;
657 height
= itv
->cxhdl
.height
;
659 /* set audio mode to left/stereo for dual/stereo mode. */
660 ivtv_vapi(itv
, CX2341X_DEC_SET_AUDIO_MODE
, 2, itv
->audio_bilingual_mode
, itv
->audio_stereo_mode
);
662 /* set number of internal decoder buffers */
663 ivtv_vapi(itv
, CX2341X_DEC_SET_DISPLAY_BUFFERS
, 1, 0);
666 ivtv_vapi(itv
, CX2341X_DEC_SET_PREBUFFERING
, 1, 1);
668 /* extract from user packets */
669 ivtv_vapi_result(itv
, data
, CX2341X_DEC_EXTRACT_VBI
, 1, 1);
670 itv
->vbi
.dec_start
= data
[0];
672 IVTV_DEBUG_INFO("Decoder VBI RE-Insert start 0x%08x size 0x%08x\n",
673 itv
->vbi
.dec_start
, data
[1]);
675 /* set decoder source settings */
676 /* Data type: 0 = mpeg from host,
677 1 = yuv from encoder,
680 case IVTV_DEC_STREAM_TYPE_YUV
:
681 if (itv
->output_mode
== OUT_PASSTHROUGH
) {
684 /* Fake size to avoid switching video standard */
687 height
= itv
->is_out_50hz
? 576 : 480;
689 IVTV_DEBUG_INFO("Setup DEC YUV Stream data[0] = %d\n", datatype
);
691 case IVTV_DEC_STREAM_TYPE_MPG
:
696 if (ivtv_vapi(itv
, CX2341X_DEC_SET_DECODER_SOURCE
, 4, datatype
,
697 width
, height
, itv
->cxhdl
.audio_properties
)) {
698 IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
701 /* Decoder sometimes dies here, so wait a moment */
702 ivtv_msleep_timeout(10, 0);
704 /* Known failure point for firmware, so check */
705 return ivtv_firmware_check(itv
, "ivtv_setup_v4l2_decode_stream");
708 int ivtv_start_v4l2_decode_stream(struct ivtv_stream
*s
, int gop_offset
)
710 struct ivtv
*itv
= s
->itv
;
713 if (s
->vdev
.v4l2_dev
== NULL
)
716 if (test_and_set_bit(IVTV_F_S_STREAMING
, &s
->s_flags
))
717 return 0; /* already started */
719 IVTV_DEBUG_INFO("Starting decode stream %s (gop_offset %d)\n", s
->name
, gop_offset
);
721 rc
= ivtv_setup_v4l2_decode_stream(s
);
723 clear_bit(IVTV_F_S_STREAMING
, &s
->s_flags
);
727 /* set dma size to 65536 bytes */
728 ivtv_vapi(itv
, CX2341X_DEC_SET_DMA_BLOCK_SIZE
, 1, 65536);
730 /* Clear Streamoff */
731 clear_bit(IVTV_F_S_STREAMOFF
, &s
->s_flags
);
733 /* Zero out decoder counters */
734 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA_END
].data
[0]);
735 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA_END
].data
[1]);
736 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA_END
].data
[2]);
737 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA_END
].data
[3]);
738 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA
].data
[0]);
739 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA
].data
[1]);
740 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA
].data
[2]);
741 writel(0, &itv
->dec_mbox
.mbox
[IVTV_MBOX_DMA
].data
[3]);
743 /* turn on notification of dual/stereo mode change */
744 ivtv_vapi(itv
, CX2341X_DEC_SET_EVENT_NOTIFICATION
, 4, 0, 1, IVTV_IRQ_DEC_AUD_MODE_CHG
, -1);
747 ivtv_vapi(itv
, CX2341X_DEC_START_PLAYBACK
, 2, gop_offset
, 0);
749 /* Let things settle before we actually start */
750 ivtv_msleep_timeout(10, 0);
752 /* Clear the following Interrupt mask bits for decoding */
753 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_DECODE
);
754 IVTV_DEBUG_IRQ("IRQ Mask is now: 0x%08x\n", itv
->irqmask
);
756 /* you're live! sit back and await interrupts :) */
757 atomic_inc(&itv
->decoding
);
761 void ivtv_stop_all_captures(struct ivtv
*itv
)
765 for (i
= IVTV_MAX_STREAMS
- 1; i
>= 0; i
--) {
766 struct ivtv_stream
*s
= &itv
->streams
[i
];
768 if (s
->vdev
.v4l2_dev
== NULL
)
770 if (test_bit(IVTV_F_S_STREAMING
, &s
->s_flags
)) {
771 ivtv_stop_v4l2_encode_stream(s
, 0);
776 int ivtv_stop_v4l2_encode_stream(struct ivtv_stream
*s
, int gop_end
)
778 struct ivtv
*itv
= s
->itv
;
779 DECLARE_WAITQUEUE(wait
, current
);
783 if (s
->vdev
.v4l2_dev
== NULL
)
786 /* This function assumes that you are allowed to stop the capture
787 and that we are actually capturing */
789 IVTV_DEBUG_INFO("Stop Capture\n");
791 if (s
->type
== IVTV_DEC_STREAM_TYPE_VOUT
)
793 if (atomic_read(&itv
->capturing
) == 0)
797 case IVTV_ENC_STREAM_TYPE_YUV
:
800 case IVTV_ENC_STREAM_TYPE_PCM
:
803 case IVTV_ENC_STREAM_TYPE_VBI
:
806 case IVTV_ENC_STREAM_TYPE_MPG
:
812 /* Stop Capture Mode */
813 if (s
->type
== IVTV_ENC_STREAM_TYPE_MPG
&& gop_end
) {
820 /* when: 0 = end of GOP 1 = NOW!, type: 0 = mpeg, subtype: 3 = video+audio */
821 ivtv_vapi(itv
, CX2341X_ENC_STOP_CAPTURE
, 3, stopmode
, cap_type
, s
->subtype
);
823 if (!test_bit(IVTV_F_S_PASSTHROUGH
, &s
->s_flags
)) {
824 if (s
->type
== IVTV_ENC_STREAM_TYPE_MPG
&& gop_end
) {
825 /* only run these if we're shutting down the last cap */
826 unsigned long duration
;
827 unsigned long then
= jiffies
;
829 add_wait_queue(&itv
->eos_waitq
, &wait
);
831 set_current_state(TASK_INTERRUPTIBLE
);
833 /* wait 2s for EOS interrupt */
834 while (!test_bit(IVTV_F_I_EOS
, &itv
->i_flags
) &&
836 then
+ msecs_to_jiffies(2000))) {
837 schedule_timeout(msecs_to_jiffies(10));
840 /* To convert jiffies to ms, we must multiply by 1000
841 * and divide by HZ. To avoid runtime division, we
842 * convert this to multiplication by 1000/HZ.
843 * Since integer division truncates, we get the best
844 * accuracy if we do a rounding calculation of the constant.
845 * Think of the case where HZ is 1024.
847 duration
= ((1000 + HZ
/ 2) / HZ
) * (jiffies
- then
);
849 if (!test_bit(IVTV_F_I_EOS
, &itv
->i_flags
)) {
850 IVTV_DEBUG_WARN("%s: EOS interrupt not received! stopping anyway.\n", s
->name
);
851 IVTV_DEBUG_WARN("%s: waited %lu ms.\n", s
->name
, duration
);
853 IVTV_DEBUG_INFO("%s: EOS took %lu ms to occur.\n", s
->name
, duration
);
855 set_current_state(TASK_RUNNING
);
856 remove_wait_queue(&itv
->eos_waitq
, &wait
);
857 set_bit(IVTV_F_S_STREAMOFF
, &s
->s_flags
);
860 /* Handle any pending interrupts */
861 ivtv_msleep_timeout(100, 0);
864 atomic_dec(&itv
->capturing
);
866 /* Clear capture and no-read bits */
867 clear_bit(IVTV_F_S_STREAMING
, &s
->s_flags
);
869 if (s
->type
== IVTV_ENC_STREAM_TYPE_VBI
)
870 ivtv_set_irq_mask(itv
, IVTV_IRQ_ENC_VBI_CAP
);
872 if (atomic_read(&itv
->capturing
) > 0) {
876 cx2341x_handler_set_busy(&itv
->cxhdl
, 0);
878 /* Set the following Interrupt mask bits for capture */
879 ivtv_set_irq_mask(itv
, IVTV_IRQ_MASK_CAPTURE
);
880 del_timer(&itv
->dma_timer
);
882 /* event notification (off) */
883 if (test_and_clear_bit(IVTV_F_I_DIG_RST
, &itv
->i_flags
)) {
884 /* type: 0 = refresh */
885 /* on/off: 0 = off, intr: 0x10000000, mbox_id: -1: none */
886 ivtv_vapi(itv
, CX2341X_ENC_SET_EVENT_NOTIFICATION
, 4, 0, 0, IVTV_IRQ_ENC_VIM_RST
, -1);
887 ivtv_set_irq_mask(itv
, IVTV_IRQ_ENC_VIM_RST
);
890 /* Raw-passthrough is implied on start. Make sure it's stopped so
891 the encoder will re-initialize when next started */
892 ivtv_vapi(itv
, CX2341X_ENC_STOP_CAPTURE
, 3, 1, 2, 7);
898 EXPORT_SYMBOL(ivtv_stop_v4l2_encode_stream
);
900 int ivtv_stop_v4l2_decode_stream(struct ivtv_stream
*s
, int flags
, u64 pts
)
902 static const struct v4l2_event ev
= {
903 .type
= V4L2_EVENT_EOS
,
905 struct ivtv
*itv
= s
->itv
;
907 if (s
->vdev
.v4l2_dev
== NULL
)
910 if (s
->type
!= IVTV_DEC_STREAM_TYPE_YUV
&& s
->type
!= IVTV_DEC_STREAM_TYPE_MPG
)
913 if (!test_bit(IVTV_F_S_STREAMING
, &s
->s_flags
))
916 IVTV_DEBUG_INFO("Stop Decode at %llu, flags: %x\n", (unsigned long long)pts
, flags
);
919 if (!(flags
& V4L2_DEC_CMD_STOP_IMMEDIATELY
) || pts
) {
922 /* Wait until the decoder is no longer running */
924 ivtv_vapi(itv
, CX2341X_DEC_STOP_PLAYBACK
, 3,
925 0, (u32
)(pts
& 0xffffffff), (u32
)(pts
>> 32));
928 u32 data
[CX2341X_MBOX_MAX_DATA
];
929 ivtv_vapi_result(itv
, data
, CX2341X_DEC_GET_XFER_INFO
, 0);
930 if (s
->q_full
.buffers
+ s
->q_dma
.buffers
== 0) {
935 if (ivtv_msleep_timeout(100, 1))
939 ivtv_vapi(itv
, CX2341X_DEC_STOP_PLAYBACK
, 3, flags
& V4L2_DEC_CMD_STOP_TO_BLACK
, 0, 0);
941 /* turn off notification of dual/stereo mode change */
942 ivtv_vapi(itv
, CX2341X_DEC_SET_EVENT_NOTIFICATION
, 4, 0, 0, IVTV_IRQ_DEC_AUD_MODE_CHG
, -1);
944 ivtv_set_irq_mask(itv
, IVTV_IRQ_MASK_DECODE
);
945 del_timer(&itv
->dma_timer
);
947 clear_bit(IVTV_F_S_NEEDS_DATA
, &s
->s_flags
);
948 clear_bit(IVTV_F_S_STREAMING
, &s
->s_flags
);
949 ivtv_flush_queues(s
);
951 /* decoder needs time to settle */
952 ivtv_msleep_timeout(40, 0);
954 /* decrement decoding */
955 atomic_dec(&itv
->decoding
);
957 set_bit(IVTV_F_I_EV_DEC_STOPPED
, &itv
->i_flags
);
958 wake_up(&itv
->event_waitq
);
959 v4l2_event_queue(&s
->vdev
, &ev
);
961 /* wake up wait queues */
967 int ivtv_passthrough_mode(struct ivtv
*itv
, int enable
)
969 struct ivtv_stream
*yuv_stream
= &itv
->streams
[IVTV_ENC_STREAM_TYPE_YUV
];
970 struct ivtv_stream
*dec_stream
= &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
972 if (yuv_stream
->vdev
.v4l2_dev
== NULL
|| dec_stream
->vdev
.v4l2_dev
== NULL
)
975 IVTV_DEBUG_INFO("ivtv ioctl: Select passthrough mode\n");
977 /* Prevent others from starting/stopping streams while we
978 initiate/terminate passthrough mode */
980 if (itv
->output_mode
== OUT_PASSTHROUGH
) {
983 if (ivtv_set_output_mode(itv
, OUT_PASSTHROUGH
) != OUT_PASSTHROUGH
)
986 /* Fully initialize stream, and then unflag init */
987 set_bit(IVTV_F_S_PASSTHROUGH
, &dec_stream
->s_flags
);
988 set_bit(IVTV_F_S_STREAMING
, &dec_stream
->s_flags
);
990 /* Setup YUV Decoder */
991 ivtv_setup_v4l2_decode_stream(dec_stream
);
994 ivtv_vapi(itv
, CX2341X_DEC_START_PLAYBACK
, 2, 0, 1);
995 atomic_inc(&itv
->decoding
);
997 /* Setup capture if not already done */
998 if (atomic_read(&itv
->capturing
) == 0) {
999 cx2341x_handler_setup(&itv
->cxhdl
);
1000 cx2341x_handler_set_busy(&itv
->cxhdl
, 1);
1003 /* Start Passthrough Mode */
1004 ivtv_vapi(itv
, CX2341X_ENC_START_CAPTURE
, 2, 2, 11);
1005 atomic_inc(&itv
->capturing
);
1009 if (itv
->output_mode
!= OUT_PASSTHROUGH
)
1012 /* Stop Passthrough Mode */
1013 ivtv_vapi(itv
, CX2341X_ENC_STOP_CAPTURE
, 3, 1, 2, 11);
1014 ivtv_vapi(itv
, CX2341X_DEC_STOP_PLAYBACK
, 3, 1, 0, 0);
1016 atomic_dec(&itv
->capturing
);
1017 atomic_dec(&itv
->decoding
);
1018 clear_bit(IVTV_F_S_PASSTHROUGH
, &dec_stream
->s_flags
);
1019 clear_bit(IVTV_F_S_STREAMING
, &dec_stream
->s_flags
);
1020 itv
->output_mode
= OUT_NONE
;
1021 if (atomic_read(&itv
->capturing
) == 0)
1022 cx2341x_handler_set_busy(&itv
->cxhdl
, 0);