Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux...
[linux/fpc-iii.git] / drivers / media / pci / pluto2 / pluto2.c
blob655d6854a8d7fa165502c711bf6c83a017cc16be
1 /*
2 * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
4 * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
6 * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
7 * by Dany Salman <salmandany@yahoo.fr>
8 * Copyright (c) 2004 TDF
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/i2c.h>
27 #include <linux/i2c-algo-bit.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/pci.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/slab.h>
36 #include "demux.h"
37 #include "dmxdev.h"
38 #include "dvb_demux.h"
39 #include "dvb_frontend.h"
40 #include "dvb_net.h"
41 #include "dvbdev.h"
42 #include "tda1004x.h"
44 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
46 #define DRIVER_NAME "pluto2"
48 #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
49 #define REG_PCAR 0x0020 /* PC address register */
50 #define REG_TSCR 0x0024 /* TS ctrl & status */
51 #define REG_MISC 0x0028 /* miscellaneous */
52 #define REG_MMAC 0x002c /* MSB MAC address */
53 #define REG_IMAC 0x0030 /* ISB MAC address */
54 #define REG_LMAC 0x0034 /* LSB MAC address */
55 #define REG_SPID 0x0038 /* SPI data */
56 #define REG_SLCS 0x003c /* serial links ctrl/status */
58 #define PID0_NOFIL (0x0001 << 16)
59 #define PIDn_ENP (0x0001 << 15)
60 #define PID0_END (0x0001 << 14)
61 #define PID0_AFIL (0x0001 << 13)
62 #define PIDn_PID (0x1fff << 0)
64 #define TSCR_NBPACKETS (0x00ff << 24)
65 #define TSCR_DEM (0x0001 << 17)
66 #define TSCR_DE (0x0001 << 16)
67 #define TSCR_RSTN (0x0001 << 15)
68 #define TSCR_MSKO (0x0001 << 14)
69 #define TSCR_MSKA (0x0001 << 13)
70 #define TSCR_MSKL (0x0001 << 12)
71 #define TSCR_OVR (0x0001 << 11)
72 #define TSCR_AFUL (0x0001 << 10)
73 #define TSCR_LOCK (0x0001 << 9)
74 #define TSCR_IACK (0x0001 << 8)
75 #define TSCR_ADEF (0x007f << 0)
77 #define MISC_DVR (0x0fff << 4)
78 #define MISC_ALED (0x0001 << 3)
79 #define MISC_FRST (0x0001 << 2)
80 #define MISC_LED1 (0x0001 << 1)
81 #define MISC_LED0 (0x0001 << 0)
83 #define SPID_SPIDR (0x00ff << 0)
85 #define SLCS_SCL (0x0001 << 7)
86 #define SLCS_SDA (0x0001 << 6)
87 #define SLCS_CSN (0x0001 << 2)
88 #define SLCS_OVR (0x0001 << 1)
89 #define SLCS_SWC (0x0001 << 0)
91 #define TS_DMA_PACKETS (8)
92 #define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
94 #define I2C_ADDR_TDA10046 0x10
95 #define I2C_ADDR_TUA6034 0xc2
96 #define NHWFILTERS 8
98 struct pluto {
99 /* pci */
100 struct pci_dev *pdev;
101 u8 __iomem *io_mem;
103 /* dvb */
104 struct dmx_frontend hw_frontend;
105 struct dmx_frontend mem_frontend;
106 struct dmxdev dmxdev;
107 struct dvb_adapter dvb_adapter;
108 struct dvb_demux demux;
109 struct dvb_frontend *fe;
110 struct dvb_net dvbnet;
111 unsigned int full_ts_users;
112 unsigned int users;
114 /* i2c */
115 struct i2c_algo_bit_data i2c_bit;
116 struct i2c_adapter i2c_adap;
117 unsigned int i2cbug;
119 /* irq */
120 unsigned int overflow;
121 unsigned int dead;
123 /* dma */
124 dma_addr_t dma_addr;
125 u8 dma_buf[TS_DMA_BYTES];
126 u8 dummy[4096];
129 static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
131 return container_of(feed->demux, struct pluto, demux);
134 static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
136 return container_of(fe->dvb, struct pluto, dvb_adapter);
139 static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
141 return readl(&pluto->io_mem[reg]);
144 static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
146 writel(val, &pluto->io_mem[reg]);
149 static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
151 u32 val = readl(&pluto->io_mem[reg]);
152 val &= ~mask;
153 val |= bits;
154 writel(val, &pluto->io_mem[reg]);
157 static void pluto_write_tscr(struct pluto *pluto, u32 val)
159 /* set the number of packets */
160 val &= ~TSCR_ADEF;
161 val |= TS_DMA_PACKETS / 2;
163 pluto_writereg(pluto, REG_TSCR, val);
166 static void pluto_setsda(void *data, int state)
168 struct pluto *pluto = data;
170 if (state)
171 pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
172 else
173 pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
176 static void pluto_setscl(void *data, int state)
178 struct pluto *pluto = data;
180 if (state)
181 pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
182 else
183 pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
185 /* try to detect i2c_inb() to workaround hardware bug:
186 * reset SDA to high after SCL has been set to low */
187 if ((state) && (pluto->i2cbug == 0)) {
188 pluto->i2cbug = 1;
189 } else {
190 if ((!state) && (pluto->i2cbug == 1))
191 pluto_setsda(pluto, 1);
192 pluto->i2cbug = 0;
196 static int pluto_getsda(void *data)
198 struct pluto *pluto = data;
200 return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
203 static int pluto_getscl(void *data)
205 struct pluto *pluto = data;
207 return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
210 static void pluto_reset_frontend(struct pluto *pluto, int reenable)
212 u32 val = pluto_readreg(pluto, REG_MISC);
214 if (val & MISC_FRST) {
215 val &= ~MISC_FRST;
216 pluto_writereg(pluto, REG_MISC, val);
218 if (reenable) {
219 val |= MISC_FRST;
220 pluto_writereg(pluto, REG_MISC, val);
224 static void pluto_reset_ts(struct pluto *pluto, int reenable)
226 u32 val = pluto_readreg(pluto, REG_TSCR);
228 if (val & TSCR_RSTN) {
229 val &= ~TSCR_RSTN;
230 pluto_write_tscr(pluto, val);
232 if (reenable) {
233 val |= TSCR_RSTN;
234 pluto_write_tscr(pluto, val);
238 static void pluto_set_dma_addr(struct pluto *pluto)
240 pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
243 static int pluto_dma_map(struct pluto *pluto)
245 pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
246 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
248 return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
251 static void pluto_dma_unmap(struct pluto *pluto)
253 pci_unmap_single(pluto->pdev, pluto->dma_addr,
254 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
257 static int pluto_start_feed(struct dvb_demux_feed *f)
259 struct pluto *pluto = feed_to_pluto(f);
261 /* enable PID filtering */
262 if (pluto->users++ == 0)
263 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
265 if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
266 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
267 else if (pluto->full_ts_users++ == 0)
268 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
270 return 0;
273 static int pluto_stop_feed(struct dvb_demux_feed *f)
275 struct pluto *pluto = feed_to_pluto(f);
277 /* disable PID filtering */
278 if (--pluto->users == 0)
279 pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
281 if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
282 pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
283 else if (--pluto->full_ts_users == 0)
284 pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
286 return 0;
289 static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
291 /* synchronize the DMA transfer with the CPU
292 * first so that we see updated contents. */
293 pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
294 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
296 /* Workaround for broken hardware:
297 * [1] On startup NBPACKETS seems to contain an uninitialized value,
298 * but no packets have been transferred.
299 * [2] Sometimes (actually very often) NBPACKETS stays at zero
300 * although one packet has been transferred.
301 * [3] Sometimes (actually rarely), the card gets into an erroneous
302 * mode where it continuously generates interrupts, claiming it
303 * has received nbpackets>TS_DMA_PACKETS packets, but no packet
304 * has been transferred. Only a reset seems to solve this
306 if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
307 unsigned int i = 0;
308 while (pluto->dma_buf[i] == 0x47)
309 i += 188;
310 nbpackets = i / 188;
311 if (i == 0) {
312 pluto_reset_ts(pluto, 1);
313 dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
317 dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
319 /* clear the dma buffer. this is needed to be able to identify
320 * new valid ts packets above */
321 memset(pluto->dma_buf, 0, nbpackets * 188);
323 /* reset the dma address */
324 pluto_set_dma_addr(pluto);
326 /* sync the buffer and give it back to the card */
327 pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
328 TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
331 static irqreturn_t pluto_irq(int irq, void *dev_id)
333 struct pluto *pluto = dev_id;
334 u32 tscr;
336 /* check whether an interrupt occurred on this device */
337 tscr = pluto_readreg(pluto, REG_TSCR);
338 if (!(tscr & (TSCR_DE | TSCR_OVR)))
339 return IRQ_NONE;
341 if (tscr == 0xffffffff) {
342 if (pluto->dead == 0)
343 dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
344 /* It's dead Jim */
345 pluto->dead = 1;
346 return IRQ_HANDLED;
349 /* dma end interrupt */
350 if (tscr & TSCR_DE) {
351 pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
352 /* overflow interrupt */
353 if (tscr & TSCR_OVR)
354 pluto->overflow++;
355 if (pluto->overflow) {
356 dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
357 pluto->overflow);
358 pluto_reset_ts(pluto, 1);
359 pluto->overflow = 0;
361 } else if (tscr & TSCR_OVR) {
362 pluto->overflow++;
365 /* ACK the interrupt */
366 pluto_write_tscr(pluto, tscr | TSCR_IACK);
368 return IRQ_HANDLED;
371 static void pluto_enable_irqs(struct pluto *pluto)
373 u32 val = pluto_readreg(pluto, REG_TSCR);
375 /* disable AFUL and LOCK interrupts */
376 val |= (TSCR_MSKA | TSCR_MSKL);
377 /* enable DMA and OVERFLOW interrupts */
378 val &= ~(TSCR_DEM | TSCR_MSKO);
379 /* clear pending interrupts */
380 val |= TSCR_IACK;
382 pluto_write_tscr(pluto, val);
385 static void pluto_disable_irqs(struct pluto *pluto)
387 u32 val = pluto_readreg(pluto, REG_TSCR);
389 /* disable all interrupts */
390 val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
391 /* clear pending interrupts */
392 val |= TSCR_IACK;
394 pluto_write_tscr(pluto, val);
397 static int pluto_hw_init(struct pluto *pluto)
399 pluto_reset_frontend(pluto, 1);
401 /* set automatic LED control by FPGA */
402 pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
404 /* set data endianness */
405 #ifdef __LITTLE_ENDIAN
406 pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
407 #else
408 pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
409 #endif
410 /* map DMA and set address */
411 pluto_dma_map(pluto);
412 pluto_set_dma_addr(pluto);
414 /* enable interrupts */
415 pluto_enable_irqs(pluto);
417 /* reset TS logic */
418 pluto_reset_ts(pluto, 1);
420 return 0;
423 static void pluto_hw_exit(struct pluto *pluto)
425 /* disable interrupts */
426 pluto_disable_irqs(pluto);
428 pluto_reset_ts(pluto, 0);
430 /* LED: disable automatic control, enable yellow, disable green */
431 pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
433 /* unmap DMA */
434 pluto_dma_unmap(pluto);
436 pluto_reset_frontend(pluto, 0);
439 static inline u32 divide(u32 numerator, u32 denominator)
441 if (denominator == 0)
442 return ~0;
444 return DIV_ROUND_CLOSEST(numerator, denominator);
447 /* LG Innotek TDTE-E001P (Infineon TUA6034) */
448 static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
450 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
451 struct pluto *pluto = frontend_to_pluto(fe);
452 struct i2c_msg msg;
453 int ret;
454 u8 buf[4];
455 u32 div;
457 // Fref = 166.667 Hz
458 // Fref * 3 = 500.000 Hz
459 // IF = 36166667
460 // IF / Fref = 217
461 //div = divide(p->frequency + 36166667, 166667);
462 div = divide(p->frequency * 3, 500000) + 217;
463 buf[0] = (div >> 8) & 0x7f;
464 buf[1] = (div >> 0) & 0xff;
466 if (p->frequency < 611000000)
467 buf[2] = 0xb4;
468 else if (p->frequency < 811000000)
469 buf[2] = 0xbc;
470 else
471 buf[2] = 0xf4;
473 // VHF: 174-230 MHz
474 // center: 350 MHz
475 // UHF: 470-862 MHz
476 if (p->frequency < 350000000)
477 buf[3] = 0x02;
478 else
479 buf[3] = 0x04;
481 if (p->bandwidth_hz == 8000000)
482 buf[3] |= 0x08;
484 msg.addr = I2C_ADDR_TUA6034 >> 1;
485 msg.flags = 0;
486 msg.buf = buf;
487 msg.len = sizeof(buf);
489 if (fe->ops.i2c_gate_ctrl)
490 fe->ops.i2c_gate_ctrl(fe, 1);
491 ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
492 if (ret < 0)
493 return ret;
494 else if (ret == 0)
495 return -EREMOTEIO;
497 return 0;
500 static int pluto2_request_firmware(struct dvb_frontend *fe,
501 const struct firmware **fw, char *name)
503 struct pluto *pluto = frontend_to_pluto(fe);
505 return request_firmware(fw, name, &pluto->pdev->dev);
508 static struct tda1004x_config pluto2_fe_config = {
509 .demod_address = I2C_ADDR_TDA10046 >> 1,
510 .invert = 1,
511 .invert_oclk = 0,
512 .xtal_freq = TDA10046_XTAL_16M,
513 .agc_config = TDA10046_AGC_DEFAULT,
514 .if_freq = TDA10046_FREQ_3617,
515 .request_firmware = pluto2_request_firmware,
518 static int frontend_init(struct pluto *pluto)
520 int ret;
522 pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
523 if (!pluto->fe) {
524 dev_err(&pluto->pdev->dev, "could not attach frontend\n");
525 return -ENODEV;
527 pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
529 ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
530 if (ret < 0) {
531 if (pluto->fe->ops.release)
532 pluto->fe->ops.release(pluto->fe);
533 return ret;
536 return 0;
539 static void pluto_read_rev(struct pluto *pluto)
541 u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
542 dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
543 (val >> 12) & 0x0f, (val >> 4) & 0xff);
546 static void pluto_read_mac(struct pluto *pluto, u8 *mac)
548 u32 val = pluto_readreg(pluto, REG_MMAC);
549 mac[0] = (val >> 8) & 0xff;
550 mac[1] = (val >> 0) & 0xff;
552 val = pluto_readreg(pluto, REG_IMAC);
553 mac[2] = (val >> 8) & 0xff;
554 mac[3] = (val >> 0) & 0xff;
556 val = pluto_readreg(pluto, REG_LMAC);
557 mac[4] = (val >> 8) & 0xff;
558 mac[5] = (val >> 0) & 0xff;
560 dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
563 static int pluto_read_serial(struct pluto *pluto)
565 struct pci_dev *pdev = pluto->pdev;
566 unsigned int i, j;
567 u8 __iomem *cis;
569 cis = pci_iomap(pdev, 1, 0);
570 if (!cis)
571 return -EIO;
573 dev_info(&pdev->dev, "S/N ");
575 for (i = 0xe0; i < 0x100; i += 4) {
576 u32 val = readl(&cis[i]);
577 for (j = 0; j < 32; j += 8) {
578 if ((val & 0xff) == 0xff)
579 goto out;
580 printk("%c", val & 0xff);
581 val >>= 8;
584 out:
585 printk("\n");
586 pci_iounmap(pdev, cis);
588 return 0;
591 static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
593 struct pluto *pluto;
594 struct dvb_adapter *dvb_adapter;
595 struct dvb_demux *dvbdemux;
596 struct dmx_demux *dmx;
597 int ret = -ENOMEM;
599 pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
600 if (!pluto)
601 goto out;
603 pluto->pdev = pdev;
605 ret = pci_enable_device(pdev);
606 if (ret < 0)
607 goto err_kfree;
609 /* enable interrupts */
610 pci_write_config_dword(pdev, 0x6c, 0x8000);
612 ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
613 if (ret < 0)
614 goto err_pci_disable_device;
616 pci_set_master(pdev);
618 ret = pci_request_regions(pdev, DRIVER_NAME);
619 if (ret < 0)
620 goto err_pci_disable_device;
622 pluto->io_mem = pci_iomap(pdev, 0, 0x40);
623 if (!pluto->io_mem) {
624 ret = -EIO;
625 goto err_pci_release_regions;
628 pci_set_drvdata(pdev, pluto);
630 ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
631 if (ret < 0)
632 goto err_pci_iounmap;
634 ret = pluto_hw_init(pluto);
635 if (ret < 0)
636 goto err_free_irq;
638 /* i2c */
639 i2c_set_adapdata(&pluto->i2c_adap, pluto);
640 strcpy(pluto->i2c_adap.name, DRIVER_NAME);
641 pluto->i2c_adap.owner = THIS_MODULE;
642 pluto->i2c_adap.dev.parent = &pdev->dev;
643 pluto->i2c_adap.algo_data = &pluto->i2c_bit;
644 pluto->i2c_bit.data = pluto;
645 pluto->i2c_bit.setsda = pluto_setsda;
646 pluto->i2c_bit.setscl = pluto_setscl;
647 pluto->i2c_bit.getsda = pluto_getsda;
648 pluto->i2c_bit.getscl = pluto_getscl;
649 pluto->i2c_bit.udelay = 10;
650 pluto->i2c_bit.timeout = 10;
652 /* Raise SCL and SDA */
653 pluto_setsda(pluto, 1);
654 pluto_setscl(pluto, 1);
656 ret = i2c_bit_add_bus(&pluto->i2c_adap);
657 if (ret < 0)
658 goto err_pluto_hw_exit;
660 /* dvb */
661 ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
662 THIS_MODULE, &pdev->dev, adapter_nr);
663 if (ret < 0)
664 goto err_i2c_del_adapter;
666 dvb_adapter = &pluto->dvb_adapter;
668 pluto_read_rev(pluto);
669 pluto_read_serial(pluto);
670 pluto_read_mac(pluto, dvb_adapter->proposed_mac);
672 dvbdemux = &pluto->demux;
673 dvbdemux->filternum = 256;
674 dvbdemux->feednum = 256;
675 dvbdemux->start_feed = pluto_start_feed;
676 dvbdemux->stop_feed = pluto_stop_feed;
677 dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
678 DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
679 ret = dvb_dmx_init(dvbdemux);
680 if (ret < 0)
681 goto err_dvb_unregister_adapter;
683 dmx = &dvbdemux->dmx;
685 pluto->hw_frontend.source = DMX_FRONTEND_0;
686 pluto->mem_frontend.source = DMX_MEMORY_FE;
687 pluto->dmxdev.filternum = NHWFILTERS;
688 pluto->dmxdev.demux = dmx;
690 ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
691 if (ret < 0)
692 goto err_dvb_dmx_release;
694 ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
695 if (ret < 0)
696 goto err_dvb_dmxdev_release;
698 ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
699 if (ret < 0)
700 goto err_remove_hw_frontend;
702 ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
703 if (ret < 0)
704 goto err_remove_mem_frontend;
706 ret = frontend_init(pluto);
707 if (ret < 0)
708 goto err_disconnect_frontend;
710 dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
711 out:
712 return ret;
714 err_disconnect_frontend:
715 dmx->disconnect_frontend(dmx);
716 err_remove_mem_frontend:
717 dmx->remove_frontend(dmx, &pluto->mem_frontend);
718 err_remove_hw_frontend:
719 dmx->remove_frontend(dmx, &pluto->hw_frontend);
720 err_dvb_dmxdev_release:
721 dvb_dmxdev_release(&pluto->dmxdev);
722 err_dvb_dmx_release:
723 dvb_dmx_release(dvbdemux);
724 err_dvb_unregister_adapter:
725 dvb_unregister_adapter(dvb_adapter);
726 err_i2c_del_adapter:
727 i2c_del_adapter(&pluto->i2c_adap);
728 err_pluto_hw_exit:
729 pluto_hw_exit(pluto);
730 err_free_irq:
731 free_irq(pdev->irq, pluto);
732 err_pci_iounmap:
733 pci_iounmap(pdev, pluto->io_mem);
734 err_pci_release_regions:
735 pci_release_regions(pdev);
736 err_pci_disable_device:
737 pci_disable_device(pdev);
738 err_kfree:
739 kfree(pluto);
740 goto out;
743 static void pluto2_remove(struct pci_dev *pdev)
745 struct pluto *pluto = pci_get_drvdata(pdev);
746 struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
747 struct dvb_demux *dvbdemux = &pluto->demux;
748 struct dmx_demux *dmx = &dvbdemux->dmx;
750 dmx->close(dmx);
751 dvb_net_release(&pluto->dvbnet);
752 if (pluto->fe)
753 dvb_unregister_frontend(pluto->fe);
755 dmx->disconnect_frontend(dmx);
756 dmx->remove_frontend(dmx, &pluto->mem_frontend);
757 dmx->remove_frontend(dmx, &pluto->hw_frontend);
758 dvb_dmxdev_release(&pluto->dmxdev);
759 dvb_dmx_release(dvbdemux);
760 dvb_unregister_adapter(dvb_adapter);
761 i2c_del_adapter(&pluto->i2c_adap);
762 pluto_hw_exit(pluto);
763 free_irq(pdev->irq, pluto);
764 pci_iounmap(pdev, pluto->io_mem);
765 pci_release_regions(pdev);
766 pci_disable_device(pdev);
767 kfree(pluto);
770 #ifndef PCI_VENDOR_ID_SCM
771 #define PCI_VENDOR_ID_SCM 0x0432
772 #endif
773 #ifndef PCI_DEVICE_ID_PLUTO2
774 #define PCI_DEVICE_ID_PLUTO2 0x0001
775 #endif
777 static struct pci_device_id pluto2_id_table[] = {
779 .vendor = PCI_VENDOR_ID_SCM,
780 .device = PCI_DEVICE_ID_PLUTO2,
781 .subvendor = PCI_ANY_ID,
782 .subdevice = PCI_ANY_ID,
783 }, {
784 /* empty */
788 MODULE_DEVICE_TABLE(pci, pluto2_id_table);
790 static struct pci_driver pluto2_driver = {
791 .name = DRIVER_NAME,
792 .id_table = pluto2_id_table,
793 .probe = pluto2_probe,
794 .remove = pluto2_remove,
797 module_pci_driver(pluto2_driver);
799 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
800 MODULE_DESCRIPTION("Pluto2 driver");
801 MODULE_LICENSE("GPL");