drivers/media/tuners/mt2060.c

   1 /*
   2  *  Driver for Microtune MT2060 "Single chip dual conversion broadband tuner"
   3  *
   4  *  Copyright (c) 2006 Olivier DANET <odanet@caramail.com>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
  20  */
  21
  22 /* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
  23
  24 #include <linux/module.h>
  25 #include <linux/delay.h>
  26 #include <linux/dvb/frontend.h>
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29
  30 #include "dvb_frontend.h"
  31
  32 #include "mt2060.h"
  33 #include "mt2060_priv.h"
  34
  35 static int debug;
  36 module_param(debug, int, 0644);
  37 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
  38
  39 #define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
  40
  41 // Reads a single register
  42 static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val)
  43 {
  44         struct i2c_msg msg[2] = {
  45                 { .addr = priv->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
  46                 { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val,  .len = 1 },
  47         };
  48
  49         if (i2c_transfer(priv->i2c, msg, 2) != 2) {
  50                 printk(KERN_WARNING "mt2060 I2C read failed\n");
  51                 return -EREMOTEIO;
  52         }
  53         return 0;
  54 }
  55
  56 // Writes a single register
  57 static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val)
  58 {
  59         u8 buf[2] = { reg, val };
  60         struct i2c_msg msg = {
  61                 .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
  62         };
  63
  64         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
  65                 printk(KERN_WARNING "mt2060 I2C write failed\n");
  66                 return -EREMOTEIO;
  67         }
  68         return 0;
  69 }
  70
  71 // Writes a set of consecutive registers
  72 static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len)
  73 {
  74         struct i2c_msg msg = {
  75                 .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len
  76         };
  77         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
  78                 printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len);
  79                 return -EREMOTEIO;
  80         }
  81         return 0;
  82 }
  83
  84 // Initialisation sequences
  85 // LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49
  86 static u8 mt2060_config1[] = {
  87         REG_LO1C1,
  88         0x3F,   0x74,   0x00,   0x08,   0x93
  89 };
  90
  91 // FMCG=2, GP2=0, GP1=0
  92 static u8 mt2060_config2[] = {
  93         REG_MISC_CTRL,
  94         0x20,   0x1E,   0x30,   0xff,   0x80,   0xff,   0x00,   0x2c,   0x42
  95 };
  96
  97 //  VGAG=3, V1CSE=1
  98
  99 #ifdef  MT2060_SPURCHECK
 100 /* The function below calculates the frequency offset between the output frequency if2
 101  and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */
 102 static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2)
 103 {
 104         int I,J;
 105         int dia,diamin,diff;
 106         diamin=1000000;
 107         for (I = 1; I < 10; I++) {
 108                 J = ((2*I*lo1)/lo2+1)/2;
 109                 diff = I*(int)lo1-J*(int)lo2;
 110                 if (diff < 0) diff=-diff;
 111                 dia = (diff-(int)if2);
 112                 if (dia < 0) dia=-dia;
 113                 if (diamin > dia) diamin=dia;
 114         }
 115         return diamin;
 116 }
 117
 118 #define BANDWIDTH 4000 // kHz
 119
 120 /* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */
 121 static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2)
 122 {
 123         u32 Spur,Sp1,Sp2;
 124         int I,J;
 125         I=0;
 126         J=1000;
 127
 128         Spur=mt2060_spurcalc(lo1,lo2,if2);
 129         if (Spur < BANDWIDTH) {
 130                 /* Potential spurs detected */
 131                 dprintk("Spurs before : f_lo1: %d  f_lo2: %d  (kHz)",
 132                         (int)lo1,(int)lo2);
 133                 I=1000;
 134                 Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2);
 135                 Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2);
 136
 137                 if (Sp1 < Sp2) {
 138                         J=-J; I=-I; Spur=Sp2;
 139                 } else
 140                         Spur=Sp1;
 141
 142                 while (Spur < BANDWIDTH) {
 143                         I += J;
 144                         Spur = mt2060_spurcalc(lo1+I,lo2+I,if2);
 145                 }
 146                 dprintk("Spurs after  : f_lo1: %d  f_lo2: %d  (kHz)",
 147                         (int)(lo1+I),(int)(lo2+I));
 148         }
 149         return I;
 150 }
 151 #endif
 152
 153 #define IF2  36150       // IF2 frequency = 36.150 MHz
 154 #define FREF 16000       // Quartz oscillator 16 MHz
 155
 156 static int mt2060_set_params(struct dvb_frontend *fe)
 157 {
 158         struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 159         struct mt2060_priv *priv;
 160         int i=0;
 161         u32 freq;
 162         u8  lnaband;
 163         u32 f_lo1,f_lo2;
 164         u32 div1,num1,div2,num2;
 165         u8  b[8];
 166         u32 if1;
 167
 168         priv = fe->tuner_priv;
 169
 170         if1 = priv->if1_freq;
 171         b[0] = REG_LO1B1;
 172         b[1] = 0xFF;
 173
 174         if (fe->ops.i2c_gate_ctrl)
 175                 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
 176
 177         mt2060_writeregs(priv,b,2);
 178
 179         freq = c->frequency / 1000; /* Hz -> kHz */
 180
 181         f_lo1 = freq + if1 * 1000;
 182         f_lo1 = (f_lo1 / 250) * 250;
 183         f_lo2 = f_lo1 - freq - IF2;
 184         // From the Comtech datasheet, the step used is 50kHz. The tuner chip could be more precise
 185         f_lo2 = ((f_lo2 + 25) / 50) * 50;
 186         priv->frequency =  (f_lo1 - f_lo2 - IF2) * 1000,
 187
 188 #ifdef MT2060_SPURCHECK
 189         // LO-related spurs detection and correction
 190         num1   = mt2060_spurcheck(f_lo1,f_lo2,IF2);
 191         f_lo1 += num1;
 192         f_lo2 += num1;
 193 #endif
 194         //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 )
 195         num1 = f_lo1 / (FREF / 64);
 196         div1 = num1 / 64;
 197         num1 &= 0x3f;
 198
 199         // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 )
 200         num2 = f_lo2 * 64 / (FREF / 128);
 201         div2 = num2 / 8192;
 202         num2 &= 0x1fff;
 203
 204         if (freq <=  95000) lnaband = 0xB0; else
 205         if (freq <= 180000) lnaband = 0xA0; else
 206         if (freq <= 260000) lnaband = 0x90; else
 207         if (freq <= 335000) lnaband = 0x80; else
 208         if (freq <= 425000) lnaband = 0x70; else
 209         if (freq <= 480000) lnaband = 0x60; else
 210         if (freq <= 570000) lnaband = 0x50; else
 211         if (freq <= 645000) lnaband = 0x40; else
 212         if (freq <= 730000) lnaband = 0x30; else
 213         if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10;
 214
 215         b[0] = REG_LO1C1;
 216         b[1] = lnaband | ((num1 >>2) & 0x0F);
 217         b[2] = div1;
 218         b[3] = (num2 & 0x0F)  | ((num1 & 3) << 4);
 219         b[4] = num2 >> 4;
 220         b[5] = ((num2 >>12) & 1) | (div2 << 1);
 221
 222         dprintk("IF1: %dMHz",(int)if1);
 223         dprintk("PLL freq=%dkHz  f_lo1=%dkHz  f_lo2=%dkHz",(int)freq,(int)f_lo1,(int)f_lo2);
 224         dprintk("PLL div1=%d  num1=%d  div2=%d  num2=%d",(int)div1,(int)num1,(int)div2,(int)num2);
 225         dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]);
 226
 227         mt2060_writeregs(priv,b,6);
 228
 229         //Waits for pll lock or timeout
 230         i = 0;
 231         do {
 232                 mt2060_readreg(priv,REG_LO_STATUS,b);
 233                 if ((b[0] & 0x88)==0x88)
 234                         break;
 235                 msleep(4);
 236                 i++;
 237         } while (i<10);
 238
 239         if (fe->ops.i2c_gate_ctrl)
 240                 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
 241
 242         return 0;
 243 }
 244
 245 static void mt2060_calibrate(struct mt2060_priv *priv)
 246 {
 247         u8 b = 0;
 248         int i = 0;
 249
 250         if (mt2060_writeregs(priv,mt2060_config1,sizeof(mt2060_config1)))
 251                 return;
 252         if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2)))
 253                 return;
 254
 255         /* initialize the clock output */
 256         mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
 257
 258         do {
 259                 b |= (1 << 6); // FM1SS;
 260                 mt2060_writereg(priv, REG_LO2C1,b);
 261                 msleep(20);
 262
 263                 if (i == 0) {
 264                         b |= (1 << 7); // FM1CA;
 265                         mt2060_writereg(priv, REG_LO2C1,b);
 266                         b &= ~(1 << 7); // FM1CA;
 267                         msleep(20);
 268                 }
 269
 270                 b &= ~(1 << 6); // FM1SS
 271                 mt2060_writereg(priv, REG_LO2C1,b);
 272
 273                 msleep(20);
 274                 i++;
 275         } while (i < 9);
 276
 277         i = 0;
 278         while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
 279                 msleep(20);
 280
 281         if (i <= 10) {
 282                 mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :)
 283                 dprintk("calibration was successful: %d", (int)priv->fmfreq);
 284         } else
 285                 dprintk("FMCAL timed out");
 286 }
 287
 288 static int mt2060_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 289 {
 290         struct mt2060_priv *priv = fe->tuner_priv;
 291         *frequency = priv->frequency;
 292         return 0;
 293 }
 294
 295 static int mt2060_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 296 {
 297         *frequency = IF2 * 1000;
 298         return 0;
 299 }
 300
 301 static int mt2060_init(struct dvb_frontend *fe)
 302 {
 303         struct mt2060_priv *priv = fe->tuner_priv;
 304         int ret;
 305
 306         if (fe->ops.i2c_gate_ctrl)
 307                 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
 308
 309         ret = mt2060_writereg(priv, REG_VGAG,
 310                               (priv->cfg->clock_out << 6) | 0x33);
 311
 312         if (fe->ops.i2c_gate_ctrl)
 313                 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
 314
 315         return ret;
 316 }
 317
 318 static int mt2060_sleep(struct dvb_frontend *fe)
 319 {
 320         struct mt2060_priv *priv = fe->tuner_priv;
 321         int ret;
 322
 323         if (fe->ops.i2c_gate_ctrl)
 324                 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
 325
 326         ret = mt2060_writereg(priv, REG_VGAG,
 327                               (priv->cfg->clock_out << 6) | 0x30);
 328
 329         if (fe->ops.i2c_gate_ctrl)
 330                 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
 331
 332         return ret;
 333 }
 334
 335 static int mt2060_release(struct dvb_frontend *fe)
 336 {
 337         kfree(fe->tuner_priv);
 338         fe->tuner_priv = NULL;
 339         return 0;
 340 }
 341
 342 static const struct dvb_tuner_ops mt2060_tuner_ops = {
 343         .info = {
 344                 .name           = "Microtune MT2060",
 345                 .frequency_min  =  48000000,
 346                 .frequency_max  = 860000000,
 347                 .frequency_step =     50000,
 348         },
 349
 350         .release       = mt2060_release,
 351
 352         .init          = mt2060_init,
 353         .sleep         = mt2060_sleep,
 354
 355         .set_params    = mt2060_set_params,
 356         .get_frequency = mt2060_get_frequency,
 357         .get_if_frequency = mt2060_get_if_frequency,
 358 };
 359
 360 /* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
 361 struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
 362 {
 363         struct mt2060_priv *priv = NULL;
 364         u8 id = 0;
 365
 366         priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
 367         if (priv == NULL)
 368                 return NULL;
 369
 370         priv->cfg      = cfg;
 371         priv->i2c      = i2c;
 372         priv->if1_freq = if1;
 373
 374         if (fe->ops.i2c_gate_ctrl)
 375                 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
 376
 377         if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
 378                 kfree(priv);
 379                 return NULL;
 380         }
 381
 382         if (id != PART_REV) {
 383                 kfree(priv);
 384                 return NULL;
 385         }
 386         printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
 387         memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
 388
 389         fe->tuner_priv = priv;
 390
 391         mt2060_calibrate(priv);
 392
 393         if (fe->ops.i2c_gate_ctrl)
 394                 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
 395
 396         return fe;
 397 }
 398 EXPORT_SYMBOL(mt2060_attach);
 399
 400 MODULE_AUTHOR("Olivier DANET");
 401 MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver");
 402 MODULE_LICENSE("GPL");