?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux...
[linux/fpc-iii.git] / drivers / net / ethernet / atheros / atlx / atl2.c
blob2ff465848b6553ecc0a646421e30cded0e8fb053
1 /*
2 * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved.
3 * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com>
4 *
5 * Derived from Intel e1000 driver
6 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program; if not, write to the Free Software Foundation, Inc., 59
20 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 */
22
23 #include <linux/atomic.h>
24 #include <linux/crc32.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ethtool.h>
28 #include <linux/hardirq.h>
29 #include <linux/if_vlan.h>
30 #include <linux/in.h>
31 #include <linux/interrupt.h>
32 #include <linux/ip.h>
33 #include <linux/irqflags.h>
34 #include <linux/irqreturn.h>
35 #include <linux/mii.h>
36 #include <linux/net.h>
37 #include <linux/netdevice.h>
38 #include <linux/pci.h>
39 #include <linux/pci_ids.h>
40 #include <linux/pm.h>
41 #include <linux/skbuff.h>
42 #include <linux/slab.h>
43 #include <linux/spinlock.h>
44 #include <linux/string.h>
45 #include <linux/tcp.h>
46 #include <linux/timer.h>
47 #include <linux/types.h>
48 #include <linux/workqueue.h>
49
50 #include "atl2.h"
51
52 #define ATL2_DRV_VERSION "2.2.3"
53
54 static const char atl2_driver_name[] = "atl2";
55 static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
56 static const char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
57 static const char atl2_driver_version[] = ATL2_DRV_VERSION;
58 static const struct ethtool_ops atl2_ethtool_ops;
59
60 MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
61 MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
62 MODULE_LICENSE("GPL");
63 MODULE_VERSION(ATL2_DRV_VERSION);
64
65 /*
66 * atl2_pci_tbl - PCI Device ID Table
67 */
68 static const struct pci_device_id atl2_pci_tbl[] = {
69 {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
70 /* required last entry */
71 {0,}
72 };
73 MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
74
75 static void atl2_check_options(struct atl2_adapter *adapter);
76
77 /**
78 * atl2_sw_init - Initialize general software structures (struct atl2_adapter)
79 * @adapter: board private structure to initialize
80 *
81 * atl2_sw_init initializes the Adapter private data structure.
82 * Fields are initialized based on PCI device information and
83 * OS network device settings (MTU size).
84 */
85 static int atl2_sw_init(struct atl2_adapter *adapter)
86 {
87 struct atl2_hw *hw = &adapter->hw;
88 struct pci_dev *pdev = adapter->pdev;
89
90 /* PCI config space info */
91 hw->vendor_id = pdev->vendor;
92 hw->device_id = pdev->device;
93 hw->subsystem_vendor_id = pdev->subsystem_vendor;
94 hw->subsystem_id = pdev->subsystem_device;
95 hw->revision_id = pdev->revision;
96
97 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
98
99 adapter->wol = 0;
100 adapter->ict = 50000; /* ~100ms */
101 adapter->link_speed = SPEED_0; /* hardware init */
102 adapter->link_duplex = FULL_DUPLEX;
103
104 hw->phy_configured = false;
105 hw->preamble_len = 7;
106 hw->ipgt = 0x60;
107 hw->min_ifg = 0x50;
108 hw->ipgr1 = 0x40;
109 hw->ipgr2 = 0x60;
110 hw->retry_buf = 2;
111 hw->max_retry = 0xf;
112 hw->lcol = 0x37;
113 hw->jam_ipg = 7;
114 hw->fc_rxd_hi = 0;
115 hw->fc_rxd_lo = 0;
116 hw->max_frame_size = adapter->netdev->mtu;
117
118 spin_lock_init(&adapter->stats_lock);
119
120 set_bit(__ATL2_DOWN, &adapter->flags);
121
122 return 0;
123 }
124
125 /**
126 * atl2_set_multi - Multicast and Promiscuous mode set
127 * @netdev: network interface device structure
128 *
129 * The set_multi entry point is called whenever the multicast address
130 * list or the network interface flags are updated. This routine is
131 * responsible for configuring the hardware for proper multicast,
132 * promiscuous mode, and all-multi behavior.
133 */
134 static void atl2_set_multi(struct net_device *netdev)
135 {
136 struct atl2_adapter *adapter = netdev_priv(netdev);
137 struct atl2_hw *hw = &adapter->hw;
138 struct netdev_hw_addr *ha;
139 u32 rctl;
140 u32 hash_value;
141
142 /* Check for Promiscuous and All Multicast modes */
143 rctl = ATL2_READ_REG(hw, REG_MAC_CTRL);
144
145 if (netdev->flags & IFF_PROMISC) {
146 rctl |= MAC_CTRL_PROMIS_EN;
147 } else if (netdev->flags & IFF_ALLMULTI) {
148 rctl |= MAC_CTRL_MC_ALL_EN;
149 rctl &= ~MAC_CTRL_PROMIS_EN;
150 } else
151 rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
152
153 ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl);
154
155 /* clear the old settings from the multicast hash table */
156 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
157 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
158
159 /* comoute mc addresses' hash value ,and put it into hash table */
160 netdev_for_each_mc_addr(ha, netdev) {
161 hash_value = atl2_hash_mc_addr(hw, ha->addr);
162 atl2_hash_set(hw, hash_value);
163 }
164 }
165
166 static void init_ring_ptrs(struct atl2_adapter *adapter)
167 {
168 /* Read / Write Ptr Initialize: */
169 adapter->txd_write_ptr = 0;
170 atomic_set(&adapter->txd_read_ptr, 0);
171
172 adapter->rxd_read_ptr = 0;
173 adapter->rxd_write_ptr = 0;
174
175 atomic_set(&adapter->txs_write_ptr, 0);
176 adapter->txs_next_clear = 0;
177 }
178
179 /**
180 * atl2_configure - Configure Transmit&Receive Unit after Reset
181 * @adapter: board private structure
182 *
183 * Configure the Tx /Rx unit of the MAC after a reset.
184 */
185 static int atl2_configure(struct atl2_adapter *adapter)
186 {
187 struct atl2_hw *hw = &adapter->hw;
188 u32 value;
189
190 /* clear interrupt status */
191 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff);
192
193 /* set MAC Address */
194 value = (((u32)hw->mac_addr[2]) << 24) |
195 (((u32)hw->mac_addr[3]) << 16) |
196 (((u32)hw->mac_addr[4]) << 8) |
197 (((u32)hw->mac_addr[5]));
198 ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value);
199 value = (((u32)hw->mac_addr[0]) << 8) |
200 (((u32)hw->mac_addr[1]));
201 ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value);
202
203 /* HI base address */
204 ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
205 (u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32));
206
207 /* LO base address */
208 ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO,
209 (u32)(adapter->txd_dma & 0x00000000ffffffffULL));
210 ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO,
211 (u32)(adapter->txs_dma & 0x00000000ffffffffULL));
212 ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO,
213 (u32)(adapter->rxd_dma & 0x00000000ffffffffULL));
214
215 /* element count */
216 ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4));
217 ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size);
218 ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM, (u16)adapter->rxd_ring_size);
219
220 /* config Internal SRAM */
221 /*
222 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end);
223 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end);
224 */
225
226 /* config IPG/IFG */
227 value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) <<
228 MAC_IPG_IFG_IPGT_SHIFT) |
229 (((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) <<
230 MAC_IPG_IFG_MIFG_SHIFT) |
231 (((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) <<
232 MAC_IPG_IFG_IPGR1_SHIFT)|
233 (((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) <<
234 MAC_IPG_IFG_IPGR2_SHIFT);
235 ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value);
236
237 /* config Half-Duplex Control */
238 value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
239 (((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) <<
240 MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
241 MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
242 (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
243 (((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) <<
244 MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
245 ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value);
246
247 /* set Interrupt Moderator Timer */
248 ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt);
249 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN);
250
251 /* set Interrupt Clear Timer */
252 ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict);
253
254 /* set MTU */
255 ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu +
256 ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE);
257
258 /* 1590 */
259 ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177);
260
261 /* flow control */
262 ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi);
263 ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo);
264
265 /* Init mailbox */
266 ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr);
267 ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr);
268
269 /* enable DMA read/write */
270 ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN);
271 ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN);
272
273 value = ATL2_READ_REG(&adapter->hw, REG_ISR);
274 if ((value & ISR_PHY_LINKDOWN) != 0)
275 value = 1; /* config failed */
276 else
277 value = 0;
278
279 /* clear all interrupt status */
280 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff);
281 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
282 return value;
283 }
284
285 /**
286 * atl2_setup_ring_resources - allocate Tx / RX descriptor resources
287 * @adapter: board private structure
288 *
289 * Return 0 on success, negative on failure
290 */
291 static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
292 {
293 struct pci_dev *pdev = adapter->pdev;
294 int size;
295 u8 offset = 0;
296
297 /* real ring DMA buffer */
298 adapter->ring_size = size =
299 adapter->txd_ring_size * 1 + 7 + /* dword align */
300 adapter->txs_ring_size * 4 + 7 + /* dword align */
301 adapter->rxd_ring_size * 1536 + 127; /* 128bytes align */
302
303 adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
304 &adapter->ring_dma);
305 if (!adapter->ring_vir_addr)
306 return -ENOMEM;
307 memset(adapter->ring_vir_addr, 0, adapter->ring_size);
308
309 /* Init TXD Ring */
310 adapter->txd_dma = adapter->ring_dma ;
311 offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0;
312 adapter->txd_dma += offset;
313 adapter->txd_ring = adapter->ring_vir_addr + offset;
314
315 /* Init TXS Ring */
316 adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size;
317 offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0;
318 adapter->txs_dma += offset;
319 adapter->txs_ring = (struct tx_pkt_status *)
320 (((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset));
321
322 /* Init RXD Ring */
323 adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4;
324 offset = (adapter->rxd_dma & 127) ?
325 (128 - (adapter->rxd_dma & 127)) : 0;
326 if (offset > 7)
327 offset -= 8;
328 else
329 offset += (128 - 8);
330
331 adapter->rxd_dma += offset;
332 adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) +
333 (adapter->txs_ring_size * 4 + offset));
334
335 /*
336 * Read / Write Ptr Initialize:
337 * init_ring_ptrs(adapter);
338 */
339 return 0;
340 }
341
342 /**
343 * atl2_irq_enable - Enable default interrupt generation settings
344 * @adapter: board private structure
345 */
346 static inline void atl2_irq_enable(struct atl2_adapter *adapter)
347 {
348 ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
349 ATL2_WRITE_FLUSH(&adapter->hw);
350 }
351
352 /**
353 * atl2_irq_disable - Mask off interrupt generation on the NIC
354 * @adapter: board private structure
355 */
356 static inline void atl2_irq_disable(struct atl2_adapter *adapter)
357 {
358 ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0);
359 ATL2_WRITE_FLUSH(&adapter->hw);
360 synchronize_irq(adapter->pdev->irq);
361 }
362
363 static void __atl2_vlan_mode(netdev_features_t features, u32 *ctrl)
364 {
365 if (features & NETIF_F_HW_VLAN_CTAG_RX) {
366 /* enable VLAN tag insert/strip */
367 *ctrl |= MAC_CTRL_RMV_VLAN;
368 } else {
369 /* disable VLAN tag insert/strip */
370 *ctrl &= ~MAC_CTRL_RMV_VLAN;
371 }
372 }
373
374 static void atl2_vlan_mode(struct net_device *netdev,
375 netdev_features_t features)
376 {
377 struct atl2_adapter *adapter = netdev_priv(netdev);
378 u32 ctrl;
379
380 atl2_irq_disable(adapter);
381
382 ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
383 __atl2_vlan_mode(features, &ctrl);
384 ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
385
386 atl2_irq_enable(adapter);
387 }
388
389 static void atl2_restore_vlan(struct atl2_adapter *adapter)
390 {
391 atl2_vlan_mode(adapter->netdev, adapter->netdev->features);
392 }
393
394 static netdev_features_t atl2_fix_features(struct net_device *netdev,
395 netdev_features_t features)
396 {
397 /*
398 * Since there is no support for separate rx/tx vlan accel
399 * enable/disable make sure tx flag is always in same state as rx.
400 */
401 if (features & NETIF_F_HW_VLAN_CTAG_RX)
402 features |= NETIF_F_HW_VLAN_CTAG_TX;
403 else
404 features &= ~NETIF_F_HW_VLAN_CTAG_TX;
405
406 return features;
407 }
408
409 static int atl2_set_features(struct net_device *netdev,
410 netdev_features_t features)
411 {
412 netdev_features_t changed = netdev->features ^ features;
413
414 if (changed & NETIF_F_HW_VLAN_CTAG_RX)
415 atl2_vlan_mode(netdev, features);
416
417 return 0;
418 }
419
420 static void atl2_intr_rx(struct atl2_adapter *adapter)
421 {
422 struct net_device *netdev = adapter->netdev;
423 struct rx_desc *rxd;
424 struct sk_buff *skb;
425
426 do {
427 rxd = adapter->rxd_ring+adapter->rxd_write_ptr;
428 if (!rxd->status.update)
429 break; /* end of tx */
430
431 /* clear this flag at once */
432 rxd->status.update = 0;
433
434 if (rxd->status.ok && rxd->status.pkt_size >= 60) {
435 int rx_size = (int)(rxd->status.pkt_size - 4);
436 /* alloc new buffer */
437 skb = netdev_alloc_skb_ip_align(netdev, rx_size);
438 if (NULL == skb) {
439 /*
440 * Check that some rx space is free. If not,
441 * free one and mark stats->rx_dropped++.
442 */
443 netdev->stats.rx_dropped++;
444 break;
445 }
446 memcpy(skb->data, rxd->packet, rx_size);
447 skb_put(skb, rx_size);
448 skb->protocol = eth_type_trans(skb, netdev);
449 if (rxd->status.vlan) {
450 u16 vlan_tag = (rxd->status.vtag>>4) |
451 ((rxd->status.vtag&7) << 13) |
452 ((rxd->status.vtag&8) << 9);
453
454 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
455 }
456 netif_rx(skb);
457 netdev->stats.rx_bytes += rx_size;
458 netdev->stats.rx_packets++;
459 } else {
460 netdev->stats.rx_errors++;
461
462 if (rxd->status.ok && rxd->status.pkt_size <= 60)
463 netdev->stats.rx_length_errors++;
464 if (rxd->status.mcast)
465 netdev->stats.multicast++;
466 if (rxd->status.crc)
467 netdev->stats.rx_crc_errors++;
468 if (rxd->status.align)
469 netdev->stats.rx_frame_errors++;
470 }
471
472 /* advance write ptr */
473 if (++adapter->rxd_write_ptr == adapter->rxd_ring_size)
474 adapter->rxd_write_ptr = 0;
475 } while (1);
476
477 /* update mailbox? */
478 adapter->rxd_read_ptr = adapter->rxd_write_ptr;
479 ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr);
480 }
481
482 static void atl2_intr_tx(struct atl2_adapter *adapter)
483 {
484 struct net_device *netdev = adapter->netdev;
485 u32 txd_read_ptr;
486 u32 txs_write_ptr;
487 struct tx_pkt_status *txs;
488 struct tx_pkt_header *txph;
489 int free_hole = 0;
490
491 do {
492 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
493 txs = adapter->txs_ring + txs_write_ptr;
494 if (!txs->update)
495 break; /* tx stop here */
496
497 free_hole = 1;
498 txs->update = 0;
499
500 if (++txs_write_ptr == adapter->txs_ring_size)
501 txs_write_ptr = 0;
502 atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr);
503
504 txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr);
505 txph = (struct tx_pkt_header *)
506 (((u8 *)adapter->txd_ring) + txd_read_ptr);
507
508 if (txph->pkt_size != txs->pkt_size) {
509 struct tx_pkt_status *old_txs = txs;
510 printk(KERN_WARNING
511 "%s: txs packet size not consistent with txd"
512 " txd_:0x%08x, txs_:0x%08x!\n",
513 adapter->netdev->name,
514 *(u32 *)txph, *(u32 *)txs);
515 printk(KERN_WARNING
516 "txd read ptr: 0x%x\n",
517 txd_read_ptr);
518 txs = adapter->txs_ring + txs_write_ptr;
519 printk(KERN_WARNING
520 "txs-behind:0x%08x\n",
521 *(u32 *)txs);
522 if (txs_write_ptr < 2) {
523 txs = adapter->txs_ring +
524 (adapter->txs_ring_size +
525 txs_write_ptr - 2);
526 } else {
527 txs = adapter->txs_ring + (txs_write_ptr - 2);
528 }
529 printk(KERN_WARNING
530 "txs-before:0x%08x\n",
531 *(u32 *)txs);
532 txs = old_txs;
533 }
534
535 /* 4for TPH */
536 txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3);
537 if (txd_read_ptr >= adapter->txd_ring_size)
538 txd_read_ptr -= adapter->txd_ring_size;
539
540 atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr);
541
542 /* tx statistics: */
543 if (txs->ok) {
544 netdev->stats.tx_bytes += txs->pkt_size;
545 netdev->stats.tx_packets++;
546 }
547 else
548 netdev->stats.tx_errors++;
549
550 if (txs->defer)
551 netdev->stats.collisions++;
552 if (txs->abort_col)
553 netdev->stats.tx_aborted_errors++;
554 if (txs->late_col)
555 netdev->stats.tx_window_errors++;
556 if (txs->underun)
557 netdev->stats.tx_fifo_errors++;
558 } while (1);
559
560 if (free_hole) {
561 if (netif_queue_stopped(adapter->netdev) &&
562 netif_carrier_ok(adapter->netdev))
563 netif_wake_queue(adapter->netdev);
564 }
565 }
566
567 static void atl2_check_for_link(struct atl2_adapter *adapter)
568 {
569 struct net_device *netdev = adapter->netdev;
570 u16 phy_data = 0;
571
572 spin_lock(&adapter->stats_lock);
573 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
574 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
575 spin_unlock(&adapter->stats_lock);
576
577 /* notify upper layer link down ASAP */
578 if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
579 if (netif_carrier_ok(netdev)) { /* old link state: Up */
580 printk(KERN_INFO "%s: %s NIC Link is Down\n",
581 atl2_driver_name, netdev->name);
582 adapter->link_speed = SPEED_0;
583 netif_carrier_off(netdev);
584 netif_stop_queue(netdev);
585 }
586 }
587 schedule_work(&adapter->link_chg_task);
588 }
589
590 static inline void atl2_clear_phy_int(struct atl2_adapter *adapter)
591 {
592 u16 phy_data;
593 spin_lock(&adapter->stats_lock);
594 atl2_read_phy_reg(&adapter->hw, 19, &phy_data);
595 spin_unlock(&adapter->stats_lock);
596 }
597
598 /**
599 * atl2_intr - Interrupt Handler
600 * @irq: interrupt number
601 * @data: pointer to a network interface device structure
602 */
603 static irqreturn_t atl2_intr(int irq, void *data)
604 {
605 struct atl2_adapter *adapter = netdev_priv(data);
606 struct atl2_hw *hw = &adapter->hw;
607 u32 status;
608
609 status = ATL2_READ_REG(hw, REG_ISR);
610 if (0 == status)
611 return IRQ_NONE;
612
613 /* link event */
614 if (status & ISR_PHY)
615 atl2_clear_phy_int(adapter);
616
617 /* clear ISR status, and Enable CMB DMA/Disable Interrupt */
618 ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
619
620 /* check if PCIE PHY Link down */
621 if (status & ISR_PHY_LINKDOWN) {
622 if (netif_running(adapter->netdev)) { /* reset MAC */
623 ATL2_WRITE_REG(hw, REG_ISR, 0);
624 ATL2_WRITE_REG(hw, REG_IMR, 0);
625 ATL2_WRITE_FLUSH(hw);
626 schedule_work(&adapter->reset_task);
627 return IRQ_HANDLED;
628 }
629 }
630
631 /* check if DMA read/write error? */
632 if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
633 ATL2_WRITE_REG(hw, REG_ISR, 0);
634 ATL2_WRITE_REG(hw, REG_IMR, 0);
635 ATL2_WRITE_FLUSH(hw);
636 schedule_work(&adapter->reset_task);
637 return IRQ_HANDLED;
638 }
639
640 /* link event */
641 if (status & (ISR_PHY | ISR_MANUAL)) {
642 adapter->netdev->stats.tx_carrier_errors++;
643 atl2_check_for_link(adapter);
644 }
645
646 /* transmit event */
647 if (status & ISR_TX_EVENT)
648 atl2_intr_tx(adapter);
649
650 /* rx exception */
651 if (status & ISR_RX_EVENT)
652 atl2_intr_rx(adapter);
653
654 /* re-enable Interrupt */
655 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
656 return IRQ_HANDLED;
657 }
658
659 static int atl2_request_irq(struct atl2_adapter *adapter)
660 {
661 struct net_device *netdev = adapter->netdev;
662 int flags, err = 0;
663
664 flags = IRQF_SHARED;
665 adapter->have_msi = true;
666 err = pci_enable_msi(adapter->pdev);
667 if (err)
668 adapter->have_msi = false;
669
670 if (adapter->have_msi)
671 flags &= ~IRQF_SHARED;
672
673 return request_irq(adapter->pdev->irq, atl2_intr, flags, netdev->name,
674 netdev);
675 }
676
677 /**
678 * atl2_free_ring_resources - Free Tx / RX descriptor Resources
679 * @adapter: board private structure
680 *
681 * Free all transmit software resources
682 */
683 static void atl2_free_ring_resources(struct atl2_adapter *adapter)
684 {
685 struct pci_dev *pdev = adapter->pdev;
686 pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
687 adapter->ring_dma);
688 }
689
690 /**
691 * atl2_open - Called when a network interface is made active
692 * @netdev: network interface device structure
693 *
694 * Returns 0 on success, negative value on failure
695 *
696 * The open entry point is called when a network interface is made
697 * active by the system (IFF_UP). At this point all resources needed
698 * for transmit and receive operations are allocated, the interrupt
699 * handler is registered with the OS, the watchdog timer is started,
700 * and the stack is notified that the interface is ready.
701 */
702 static int atl2_open(struct net_device *netdev)
703 {
704 struct atl2_adapter *adapter = netdev_priv(netdev);
705 int err;
706 u32 val;
707
708 /* disallow open during test */
709 if (test_bit(__ATL2_TESTING, &adapter->flags))
710 return -EBUSY;
711
712 /* allocate transmit descriptors */
713 err = atl2_setup_ring_resources(adapter);
714 if (err)
715 return err;
716
717 err = atl2_init_hw(&adapter->hw);
718 if (err) {
719 err = -EIO;
720 goto err_init_hw;
721 }
722
723 /* hardware has been reset, we need to reload some things */
724 atl2_set_multi(netdev);
725 init_ring_ptrs(adapter);
726
727 atl2_restore_vlan(adapter);
728
729 if (atl2_configure(adapter)) {
730 err = -EIO;
731 goto err_config;
732 }
733
734 err = atl2_request_irq(adapter);
735 if (err)
736 goto err_req_irq;
737
738 clear_bit(__ATL2_DOWN, &adapter->flags);
739
740 mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 4*HZ));
741
742 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
743 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
744 val | MASTER_CTRL_MANUAL_INT);
745
746 atl2_irq_enable(adapter);
747
748 return 0;
749
750 err_init_hw:
751 err_req_irq:
752 err_config:
753 atl2_free_ring_resources(adapter);
754 atl2_reset_hw(&adapter->hw);
755
756 return err;
757 }
758
759 static void atl2_down(struct atl2_adapter *adapter)
760 {
761 struct net_device *netdev = adapter->netdev;
762
763 /* signal that we're down so the interrupt handler does not
764 * reschedule our watchdog timer */
765 set_bit(__ATL2_DOWN, &adapter->flags);
766
767 netif_tx_disable(netdev);
768
769 /* reset MAC to disable all RX/TX */
770 atl2_reset_hw(&adapter->hw);
771 msleep(1);
772
773 atl2_irq_disable(adapter);
774
775 del_timer_sync(&adapter->watchdog_timer);
776 del_timer_sync(&adapter->phy_config_timer);
777 clear_bit(0, &adapter->cfg_phy);
778
779 netif_carrier_off(netdev);
780 adapter->link_speed = SPEED_0;
781 adapter->link_duplex = -1;
782 }
783
784 static void atl2_free_irq(struct atl2_adapter *adapter)
785 {
786 struct net_device *netdev = adapter->netdev;
787
788 free_irq(adapter->pdev->irq, netdev);
789
790 #ifdef CONFIG_PCI_MSI
791 if (adapter->have_msi)
792 pci_disable_msi(adapter->pdev);
793 #endif
794 }
795
796 /**
797 * atl2_close - Disables a network interface
798 * @netdev: network interface device structure
799 *
800 * Returns 0, this is not allowed to fail
801 *
802 * The close entry point is called when an interface is de-activated
803 * by the OS. The hardware is still under the drivers control, but
804 * needs to be disabled. A global MAC reset is issued to stop the
805 * hardware, and all transmit and receive resources are freed.
806 */
807 static int atl2_close(struct net_device *netdev)
808 {
809 struct atl2_adapter *adapter = netdev_priv(netdev);
810
811 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
812
813 atl2_down(adapter);
814 atl2_free_irq(adapter);
815 atl2_free_ring_resources(adapter);
816
817 return 0;
818 }
819
820 static inline int TxsFreeUnit(struct atl2_adapter *adapter)
821 {
822 u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
823
824 return (adapter->txs_next_clear >= txs_write_ptr) ?
825 (int) (adapter->txs_ring_size - adapter->txs_next_clear +
826 txs_write_ptr - 1) :
827 (int) (txs_write_ptr - adapter->txs_next_clear - 1);
828 }
829
830 static inline int TxdFreeBytes(struct atl2_adapter *adapter)
831 {
832 u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr);
833
834 return (adapter->txd_write_ptr >= txd_read_ptr) ?
835 (int) (adapter->txd_ring_size - adapter->txd_write_ptr +
836 txd_read_ptr - 1) :
837 (int) (txd_read_ptr - adapter->txd_write_ptr - 1);
838 }
839
840 static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb,
841 struct net_device *netdev)
842 {
843 struct atl2_adapter *adapter = netdev_priv(netdev);
844 struct tx_pkt_header *txph;
845 u32 offset, copy_len;
846 int txs_unused;
847 int txbuf_unused;
848
849 if (test_bit(__ATL2_DOWN, &adapter->flags)) {
850 dev_kfree_skb_any(skb);
851 return NETDEV_TX_OK;
852 }
853
854 if (unlikely(skb->len <= 0)) {
855 dev_kfree_skb_any(skb);
856 return NETDEV_TX_OK;
857 }
858
859 txs_unused = TxsFreeUnit(adapter);
860 txbuf_unused = TxdFreeBytes(adapter);
861
862 if (skb->len + sizeof(struct tx_pkt_header) + 4 > txbuf_unused ||
863 txs_unused < 1) {
864 /* not enough resources */
865 netif_stop_queue(netdev);
866 return NETDEV_TX_BUSY;
867 }
868
869 offset = adapter->txd_write_ptr;
870
871 txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset);
872
873 *(u32 *)txph = 0;
874 txph->pkt_size = skb->len;
875
876 offset += 4;
877 if (offset >= adapter->txd_ring_size)
878 offset -= adapter->txd_ring_size;
879 copy_len = adapter->txd_ring_size - offset;
880 if (copy_len >= skb->len) {
881 memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len);
882 offset += ((u32)(skb->len + 3) & ~3);
883 } else {
884 memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len);
885 memcpy((u8 *)adapter->txd_ring, skb->data+copy_len,
886 skb->len-copy_len);
887 offset = ((u32)(skb->len-copy_len + 3) & ~3);
888 }
889 #ifdef NETIF_F_HW_VLAN_CTAG_TX
890 if (skb_vlan_tag_present(skb)) {
891 u16 vlan_tag = skb_vlan_tag_get(skb);
892 vlan_tag = (vlan_tag << 4) |
893 (vlan_tag >> 13) |
894 ((vlan_tag >> 9) & 0x8);
895 txph->ins_vlan = 1;
896 txph->vlan = vlan_tag;
897 }
898 #endif
899 if (offset >= adapter->txd_ring_size)
900 offset -= adapter->txd_ring_size;
901 adapter->txd_write_ptr = offset;
902
903 /* clear txs before send */
904 adapter->txs_ring[adapter->txs_next_clear].update = 0;
905 if (++adapter->txs_next_clear == adapter->txs_ring_size)
906 adapter->txs_next_clear = 0;
907
908 ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX,
909 (adapter->txd_write_ptr >> 2));
910
911 mmiowb();
912 dev_kfree_skb_any(skb);
913 return NETDEV_TX_OK;
914 }
915
916 /**
917 * atl2_change_mtu - Change the Maximum Transfer Unit
918 * @netdev: network interface device structure
919 * @new_mtu: new value for maximum frame size
920 *
921 * Returns 0 on success, negative on failure
922 */
923 static int atl2_change_mtu(struct net_device *netdev, int new_mtu)
924 {
925 struct atl2_adapter *adapter = netdev_priv(netdev);
926 struct atl2_hw *hw = &adapter->hw;
927
928 if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE)))
929 return -EINVAL;
930
931 /* set MTU */
932 if (hw->max_frame_size != new_mtu) {
933 netdev->mtu = new_mtu;
934 ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE +
935 VLAN_SIZE + ETHERNET_FCS_SIZE);
936 }
937
938 return 0;
939 }
940
941 /**
942 * atl2_set_mac - Change the Ethernet Address of the NIC
943 * @netdev: network interface device structure
944 * @p: pointer to an address structure
945 *
946 * Returns 0 on success, negative on failure
947 */
948 static int atl2_set_mac(struct net_device *netdev, void *p)
949 {
950 struct atl2_adapter *adapter = netdev_priv(netdev);
951 struct sockaddr *addr = p;
952
953 if (!is_valid_ether_addr(addr->sa_data))
954 return -EADDRNOTAVAIL;
955
956 if (netif_running(netdev))
957 return -EBUSY;
958
959 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
960 memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
961
962 atl2_set_mac_addr(&adapter->hw);
963
964 return 0;
965 }
966
967 static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
968 {
969 struct atl2_adapter *adapter = netdev_priv(netdev);
970 struct mii_ioctl_data *data = if_mii(ifr);
971 unsigned long flags;
972
973 switch (cmd) {
974 case SIOCGMIIPHY:
975 data->phy_id = 0;
976 break;
977 case SIOCGMIIREG:
978 spin_lock_irqsave(&adapter->stats_lock, flags);
979 if (atl2_read_phy_reg(&adapter->hw,
980 data->reg_num & 0x1F, &data->val_out)) {
981 spin_unlock_irqrestore(&adapter->stats_lock, flags);
982 return -EIO;
983 }
984 spin_unlock_irqrestore(&adapter->stats_lock, flags);
985 break;
986 case SIOCSMIIREG:
987 if (data->reg_num & ~(0x1F))
988 return -EFAULT;
989 spin_lock_irqsave(&adapter->stats_lock, flags);
990 if (atl2_write_phy_reg(&adapter->hw, data->reg_num,
991 data->val_in)) {
992 spin_unlock_irqrestore(&adapter->stats_lock, flags);
993 return -EIO;
994 }
995 spin_unlock_irqrestore(&adapter->stats_lock, flags);
996 break;
997 default:
998 return -EOPNOTSUPP;
999 }
1000 return 0;
1001 }
1002
1003 static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1004 {
1005 switch (cmd) {
1006 case SIOCGMIIPHY:
1007 case SIOCGMIIREG:
1008 case SIOCSMIIREG:
1009 return atl2_mii_ioctl(netdev, ifr, cmd);
1010 #ifdef ETHTOOL_OPS_COMPAT
1011 case SIOCETHTOOL:
1012 return ethtool_ioctl(ifr);
1013 #endif
1014 default:
1015 return -EOPNOTSUPP;
1016 }
1017 }
1018
1019 /**
1020 * atl2_tx_timeout - Respond to a Tx Hang
1021 * @netdev: network interface device structure
1022 */
1023 static void atl2_tx_timeout(struct net_device *netdev)
1024 {
1025 struct atl2_adapter *adapter = netdev_priv(netdev);
1026
1027 /* Do the reset outside of interrupt context */
1028 schedule_work(&adapter->reset_task);
1029 }
1030
1031 /**
1032 * atl2_watchdog - Timer Call-back
1033 * @data: pointer to netdev cast into an unsigned long
1034 */
1035 static void atl2_watchdog(unsigned long data)
1036 {
1037 struct atl2_adapter *adapter = (struct atl2_adapter *) data;
1038
1039 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1040 u32 drop_rxd, drop_rxs;
1041 unsigned long flags;
1042
1043 spin_lock_irqsave(&adapter->stats_lock, flags);
1044 drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV);
1045 drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV);
1046 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1047
1048 adapter->netdev->stats.rx_over_errors += drop_rxd + drop_rxs;
1049
1050 /* Reset the timer */
1051 mod_timer(&adapter->watchdog_timer,
1052 round_jiffies(jiffies + 4 * HZ));
1053 }
1054 }
1055
1056 /**
1057 * atl2_phy_config - Timer Call-back
1058 * @data: pointer to netdev cast into an unsigned long
1059 */
1060 static void atl2_phy_config(unsigned long data)
1061 {
1062 struct atl2_adapter *adapter = (struct atl2_adapter *) data;
1063 struct atl2_hw *hw = &adapter->hw;
1064 unsigned long flags;
1065
1066 spin_lock_irqsave(&adapter->stats_lock, flags);
1067 atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
1068 atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN |
1069 MII_CR_RESTART_AUTO_NEG);
1070 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1071 clear_bit(0, &adapter->cfg_phy);
1072 }
1073
1074 static int atl2_up(struct atl2_adapter *adapter)
1075 {
1076 struct net_device *netdev = adapter->netdev;
1077 int err = 0;
1078 u32 val;
1079
1080 /* hardware has been reset, we need to reload some things */
1081
1082 err = atl2_init_hw(&adapter->hw);
1083 if (err) {
1084 err = -EIO;
1085 return err;
1086 }
1087
1088 atl2_set_multi(netdev);
1089 init_ring_ptrs(adapter);
1090
1091 atl2_restore_vlan(adapter);
1092
1093 if (atl2_configure(adapter)) {
1094 err = -EIO;
1095 goto err_up;
1096 }
1097
1098 clear_bit(__ATL2_DOWN, &adapter->flags);
1099
1100 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
1101 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val |
1102 MASTER_CTRL_MANUAL_INT);
1103
1104 atl2_irq_enable(adapter);
1105
1106 err_up:
1107 return err;
1108 }
1109
1110 static void atl2_reinit_locked(struct atl2_adapter *adapter)
1111 {
1112 WARN_ON(in_interrupt());
1113 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1114 msleep(1);
1115 atl2_down(adapter);
1116 atl2_up(adapter);
1117 clear_bit(__ATL2_RESETTING, &adapter->flags);
1118 }
1119
1120 static void atl2_reset_task(struct work_struct *work)
1121 {
1122 struct atl2_adapter *adapter;
1123 adapter = container_of(work, struct atl2_adapter, reset_task);
1124
1125 atl2_reinit_locked(adapter);
1126 }
1127
1128 static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter)
1129 {
1130 u32 value;
1131 struct atl2_hw *hw = &adapter->hw;
1132 struct net_device *netdev = adapter->netdev;
1133
1134 /* Config MAC CTRL Register */
1135 value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1136
1137 /* duplex */
1138 if (FULL_DUPLEX == adapter->link_duplex)
1139 value |= MAC_CTRL_DUPLX;
1140
1141 /* flow control */
1142 value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
1143
1144 /* PAD & CRC */
1145 value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1146
1147 /* preamble length */
1148 value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) <<
1149 MAC_CTRL_PRMLEN_SHIFT);
1150
1151 /* vlan */
1152 __atl2_vlan_mode(netdev->features, &value);
1153
1154 /* filter mode */
1155 value |= MAC_CTRL_BC_EN;
1156 if (netdev->flags & IFF_PROMISC)
1157 value |= MAC_CTRL_PROMIS_EN;
1158 else if (netdev->flags & IFF_ALLMULTI)
1159 value |= MAC_CTRL_MC_ALL_EN;
1160
1161 /* half retry buffer */
1162 value |= (((u32)(adapter->hw.retry_buf &
1163 MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1164
1165 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1166 }
1167
1168 static int atl2_check_link(struct atl2_adapter *adapter)
1169 {
1170 struct atl2_hw *hw = &adapter->hw;
1171 struct net_device *netdev = adapter->netdev;
1172 int ret_val;
1173 u16 speed, duplex, phy_data;
1174 int reconfig = 0;
1175
1176 /* MII_BMSR must read twise */
1177 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1178 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1179 if (!(phy_data&BMSR_LSTATUS)) { /* link down */
1180 if (netif_carrier_ok(netdev)) { /* old link state: Up */
1181 u32 value;
1182 /* disable rx */
1183 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1184 value &= ~MAC_CTRL_RX_EN;
1185 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1186 adapter->link_speed = SPEED_0;
1187 netif_carrier_off(netdev);
1188 netif_stop_queue(netdev);
1189 }
1190 return 0;
1191 }
1192
1193 /* Link Up */
1194 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1195 if (ret_val)
1196 return ret_val;
1197 switch (hw->MediaType) {
1198 case MEDIA_TYPE_100M_FULL:
1199 if (speed != SPEED_100 || duplex != FULL_DUPLEX)
1200 reconfig = 1;
1201 break;
1202 case MEDIA_TYPE_100M_HALF:
1203 if (speed != SPEED_100 || duplex != HALF_DUPLEX)
1204 reconfig = 1;
1205 break;
1206 case MEDIA_TYPE_10M_FULL:
1207 if (speed != SPEED_10 || duplex != FULL_DUPLEX)
1208 reconfig = 1;
1209 break;
1210 case MEDIA_TYPE_10M_HALF:
1211 if (speed != SPEED_10 || duplex != HALF_DUPLEX)
1212 reconfig = 1;
1213 break;
1214 }
1215 /* link result is our setting */
1216 if (reconfig == 0) {
1217 if (adapter->link_speed != speed ||
1218 adapter->link_duplex != duplex) {
1219 adapter->link_speed = speed;
1220 adapter->link_duplex = duplex;
1221 atl2_setup_mac_ctrl(adapter);
1222 printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
1223 atl2_driver_name, netdev->name,
1224 adapter->link_speed,
1225 adapter->link_duplex == FULL_DUPLEX ?
1226 "Full Duplex" : "Half Duplex");
1227 }
1228
1229 if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
1230 netif_carrier_on(netdev);
1231 netif_wake_queue(netdev);
1232 }
1233 return 0;
1234 }
1235
1236 /* change original link status */
1237 if (netif_carrier_ok(netdev)) {
1238 u32 value;
1239 /* disable rx */
1240 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1241 value &= ~MAC_CTRL_RX_EN;
1242 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1243
1244 adapter->link_speed = SPEED_0;
1245 netif_carrier_off(netdev);
1246 netif_stop_queue(netdev);
1247 }
1248
1249 /* auto-neg, insert timer to re-config phy
1250 * (if interval smaller than 5 seconds, something strange) */
1251 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1252 if (!test_and_set_bit(0, &adapter->cfg_phy))
1253 mod_timer(&adapter->phy_config_timer,
1254 round_jiffies(jiffies + 5 * HZ));
1255 }
1256
1257 return 0;
1258 }
1259
1260 /**
1261 * atl2_link_chg_task - deal with link change event Out of interrupt context
1262 */
1263 static void atl2_link_chg_task(struct work_struct *work)
1264 {
1265 struct atl2_adapter *adapter;
1266 unsigned long flags;
1267
1268 adapter = container_of(work, struct atl2_adapter, link_chg_task);
1269
1270 spin_lock_irqsave(&adapter->stats_lock, flags);
1271 atl2_check_link(adapter);
1272 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1273 }
1274
1275 static void atl2_setup_pcicmd(struct pci_dev *pdev)
1276 {
1277 u16 cmd;
1278
1279 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
1280
1281 if (cmd & PCI_COMMAND_INTX_DISABLE)
1282 cmd &= ~PCI_COMMAND_INTX_DISABLE;
1283 if (cmd & PCI_COMMAND_IO)
1284 cmd &= ~PCI_COMMAND_IO;
1285 if (0 == (cmd & PCI_COMMAND_MEMORY))
1286 cmd |= PCI_COMMAND_MEMORY;
1287 if (0 == (cmd & PCI_COMMAND_MASTER))
1288 cmd |= PCI_COMMAND_MASTER;
1289 pci_write_config_word(pdev, PCI_COMMAND, cmd);
1290
1291 /*
1292 * some motherboards BIOS(PXE/EFI) driver may set PME
1293 * while they transfer control to OS (Windows/Linux)
1294 * so we should clear this bit before NIC work normally
1295 */
1296 pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
1297 }
1298
1299 #ifdef CONFIG_NET_POLL_CONTROLLER
1300 static void atl2_poll_controller(struct net_device *netdev)
1301 {
1302 disable_irq(netdev->irq);
1303 atl2_intr(netdev->irq, netdev);
1304 enable_irq(netdev->irq);
1305 }
1306 #endif
1307
1308
1309 static const struct net_device_ops atl2_netdev_ops = {
1310 .ndo_open = atl2_open,
1311 .ndo_stop = atl2_close,
1312 .ndo_start_xmit = atl2_xmit_frame,
1313 .ndo_set_rx_mode = atl2_set_multi,
1314 .ndo_validate_addr = eth_validate_addr,
1315 .ndo_set_mac_address = atl2_set_mac,
1316 .ndo_change_mtu = atl2_change_mtu,
1317 .ndo_fix_features = atl2_fix_features,
1318 .ndo_set_features = atl2_set_features,
1319 .ndo_do_ioctl = atl2_ioctl,
1320 .ndo_tx_timeout = atl2_tx_timeout,
1321 #ifdef CONFIG_NET_POLL_CONTROLLER
1322 .ndo_poll_controller = atl2_poll_controller,
1323 #endif
1324 };
1325
1326 /**
1327 * atl2_probe - Device Initialization Routine
1328 * @pdev: PCI device information struct
1329 * @ent: entry in atl2_pci_tbl
1330 *
1331 * Returns 0 on success, negative on failure
1332 *
1333 * atl2_probe initializes an adapter identified by a pci_dev structure.
1334 * The OS initialization, configuring of the adapter private structure,
1335 * and a hardware reset occur.
1336 */
1337 static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1338 {
1339 struct net_device *netdev;
1340 struct atl2_adapter *adapter;
1341 static int cards_found;
1342 unsigned long mmio_start;
1343 int mmio_len;
1344 int err;
1345
1346 cards_found = 0;
1347
1348 err = pci_enable_device(pdev);
1349 if (err)
1350 return err;
1351
1352 /*
1353 * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA
1354 * until the kernel has the proper infrastructure to support 64-bit DMA
1355 * on these devices.
1356 */
1357 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
1358 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1359 printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
1360 goto err_dma;
1361 }
1362
1363 /* Mark all PCI regions associated with PCI device
1364 * pdev as being reserved by owner atl2_driver_name */
1365 err = pci_request_regions(pdev, atl2_driver_name);
1366 if (err)
1367 goto err_pci_reg;
1368
1369 /* Enables bus-mastering on the device and calls
1370 * pcibios_set_master to do the needed arch specific settings */
1371 pci_set_master(pdev);
1372
1373 err = -ENOMEM;
1374 netdev = alloc_etherdev(sizeof(struct atl2_adapter));
1375 if (!netdev)
1376 goto err_alloc_etherdev;
1377
1378 SET_NETDEV_DEV(netdev, &pdev->dev);
1379
1380 pci_set_drvdata(pdev, netdev);
1381 adapter = netdev_priv(netdev);
1382 adapter->netdev = netdev;
1383 adapter->pdev = pdev;
1384 adapter->hw.back = adapter;
1385
1386 mmio_start = pci_resource_start(pdev, 0x0);
1387 mmio_len = pci_resource_len(pdev, 0x0);
1388
1389 adapter->hw.mem_rang = (u32)mmio_len;
1390 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
1391 if (!adapter->hw.hw_addr) {
1392 err = -EIO;
1393 goto err_ioremap;
1394 }
1395
1396 atl2_setup_pcicmd(pdev);
1397
1398 netdev->netdev_ops = &atl2_netdev_ops;
1399 netdev->ethtool_ops = &atl2_ethtool_ops;
1400 netdev->watchdog_timeo = 5 * HZ;
1401 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1402
1403 netdev->mem_start = mmio_start;
1404 netdev->mem_end = mmio_start + mmio_len;
1405 adapter->bd_number = cards_found;
1406 adapter->pci_using_64 = false;
1407
1408 /* setup the private structure */
1409 err = atl2_sw_init(adapter);
1410 if (err)
1411 goto err_sw_init;
1412
1413 err = -EIO;
1414
1415 netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX;
1416 netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
1417
1418 /* Init PHY as early as possible due to power saving issue */
1419 atl2_phy_init(&adapter->hw);
1420
1421 /* reset the controller to
1422 * put the device in a known good starting state */
1423
1424 if (atl2_reset_hw(&adapter->hw)) {
1425 err = -EIO;
1426 goto err_reset;
1427 }
1428
1429 /* copy the MAC address out of the EEPROM */
1430 atl2_read_mac_addr(&adapter->hw);
1431 memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
1432 if (!is_valid_ether_addr(netdev->dev_addr)) {
1433 err = -EIO;
1434 goto err_eeprom;
1435 }
1436
1437 atl2_check_options(adapter);
1438
1439 setup_timer(&adapter->watchdog_timer, atl2_watchdog,
1440 (unsigned long)adapter);
1441
1442 setup_timer(&adapter->phy_config_timer, atl2_phy_config,
1443 (unsigned long)adapter);
1444
1445 INIT_WORK(&adapter->reset_task, atl2_reset_task);
1446 INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task);
1447
1448 strcpy(netdev->name, "eth%d"); /* ?? */
1449 err = register_netdev(netdev);
1450 if (err)
1451 goto err_register;
1452
1453 /* assume we have no link for now */
1454 netif_carrier_off(netdev);
1455 netif_stop_queue(netdev);
1456
1457 cards_found++;
1458
1459 return 0;
1460
1461 err_reset:
1462 err_register:
1463 err_sw_init:
1464 err_eeprom:
1465 iounmap(adapter->hw.hw_addr);
1466 err_ioremap:
1467 free_netdev(netdev);
1468 err_alloc_etherdev:
1469 pci_release_regions(pdev);
1470 err_pci_reg:
1471 err_dma:
1472 pci_disable_device(pdev);
1473 return err;
1474 }
1475
1476 /**
1477 * atl2_remove - Device Removal Routine
1478 * @pdev: PCI device information struct
1479 *
1480 * atl2_remove is called by the PCI subsystem to alert the driver
1481 * that it should release a PCI device. The could be caused by a
1482 * Hot-Plug event, or because the driver is going to be removed from
1483 * memory.
1484 */
1485 /* FIXME: write the original MAC address back in case it was changed from a
1486 * BIOS-set value, as in atl1 -- CHS */
1487 static void atl2_remove(struct pci_dev *pdev)
1488 {
1489 struct net_device *netdev = pci_get_drvdata(pdev);
1490 struct atl2_adapter *adapter = netdev_priv(netdev);
1491
1492 /* flush_scheduled work may reschedule our watchdog task, so
1493 * explicitly disable watchdog tasks from being rescheduled */
1494 set_bit(__ATL2_DOWN, &adapter->flags);
1495
1496 del_timer_sync(&adapter->watchdog_timer);
1497 del_timer_sync(&adapter->phy_config_timer);
1498 cancel_work_sync(&adapter->reset_task);
1499 cancel_work_sync(&adapter->link_chg_task);
1500
1501 unregister_netdev(netdev);
1502
1503 atl2_force_ps(&adapter->hw);
1504
1505 iounmap(adapter->hw.hw_addr);
1506 pci_release_regions(pdev);
1507
1508 free_netdev(netdev);
1509
1510 pci_disable_device(pdev);
1511 }
1512
1513 static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
1514 {
1515 struct net_device *netdev = pci_get_drvdata(pdev);
1516 struct atl2_adapter *adapter = netdev_priv(netdev);
1517 struct atl2_hw *hw = &adapter->hw;
1518 u16 speed, duplex;
1519 u32 ctrl = 0;
1520 u32 wufc = adapter->wol;
1521
1522 #ifdef CONFIG_PM
1523 int retval = 0;
1524 #endif
1525
1526 netif_device_detach(netdev);
1527
1528 if (netif_running(netdev)) {
1529 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
1530 atl2_down(adapter);
1531 }
1532
1533 #ifdef CONFIG_PM
1534 retval = pci_save_state(pdev);
1535 if (retval)
1536 return retval;
1537 #endif
1538
1539 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1540 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1541 if (ctrl & BMSR_LSTATUS)
1542 wufc &= ~ATLX_WUFC_LNKC;
1543
1544 if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) {
1545 u32 ret_val;
1546 /* get current link speed & duplex */
1547 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1548 if (ret_val) {
1549 printk(KERN_DEBUG
1550 "%s: get speed&duplex error while suspend\n",
1551 atl2_driver_name);
1552 goto wol_dis;
1553 }
1554
1555 ctrl = 0;
1556
1557 /* turn on magic packet wol */
1558 if (wufc & ATLX_WUFC_MAG)
1559 ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
1560
1561 /* ignore Link Chg event when Link is up */
1562 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1563
1564 /* Config MAC CTRL Register */
1565 ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1566 if (FULL_DUPLEX == adapter->link_duplex)
1567 ctrl |= MAC_CTRL_DUPLX;
1568 ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1569 ctrl |= (((u32)adapter->hw.preamble_len &
1570 MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
1571 ctrl |= (((u32)(adapter->hw.retry_buf &
1572 MAC_CTRL_HALF_LEFT_BUF_MASK)) <<
1573 MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1574 if (wufc & ATLX_WUFC_MAG) {
1575 /* magic packet maybe Broadcast&multicast&Unicast */
1576 ctrl |= MAC_CTRL_BC_EN;
1577 }
1578
1579 ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl);
1580
1581 /* pcie patch */
1582 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1583 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1584 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1585 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1586 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1587 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1588
1589 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1590 goto suspend_exit;
1591 }
1592
1593 if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) {
1594 /* link is down, so only LINK CHG WOL event enable */
1595 ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
1596 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1597 ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0);
1598
1599 /* pcie patch */
1600 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1601 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1602 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1603 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1604 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1605 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1606
1607 hw->phy_configured = false; /* re-init PHY when resume */
1608
1609 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1610
1611 goto suspend_exit;
1612 }
1613
1614 wol_dis:
1615 /* WOL disabled */
1616 ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0);
1617
1618 /* pcie patch */
1619 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1620 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1621 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1622 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1623 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1624 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1625
1626 atl2_force_ps(hw);
1627 hw->phy_configured = false; /* re-init PHY when resume */
1628
1629 pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
1630
1631 suspend_exit:
1632 if (netif_running(netdev))
1633 atl2_free_irq(adapter);
1634
1635 pci_disable_device(pdev);
1636
1637 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1638
1639 return 0;
1640 }
1641
1642 #ifdef CONFIG_PM
1643 static int atl2_resume(struct pci_dev *pdev)
1644 {
1645 struct net_device *netdev = pci_get_drvdata(pdev);
1646 struct atl2_adapter *adapter = netdev_priv(netdev);
1647 u32 err;
1648
1649 pci_set_power_state(pdev, PCI_D0);
1650 pci_restore_state(pdev);
1651
1652 err = pci_enable_device(pdev);
1653 if (err) {
1654 printk(KERN_ERR
1655 "atl2: Cannot enable PCI device from suspend\n");
1656 return err;
1657 }
1658
1659 pci_set_master(pdev);
1660
1661 ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
1662
1663 pci_enable_wake(pdev, PCI_D3hot, 0);
1664 pci_enable_wake(pdev, PCI_D3cold, 0);
1665
1666 ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
1667
1668 if (netif_running(netdev)) {
1669 err = atl2_request_irq(adapter);
1670 if (err)
1671 return err;
1672 }
1673
1674 atl2_reset_hw(&adapter->hw);
1675
1676 if (netif_running(netdev))
1677 atl2_up(adapter);
1678
1679 netif_device_attach(netdev);
1680
1681 return 0;
1682 }
1683 #endif
1684
1685 static void atl2_shutdown(struct pci_dev *pdev)
1686 {
1687 atl2_suspend(pdev, PMSG_SUSPEND);
1688 }
1689
1690 static struct pci_driver atl2_driver = {
1691 .name = atl2_driver_name,
1692 .id_table = atl2_pci_tbl,
1693 .probe = atl2_probe,
1694 .remove = atl2_remove,
1695 /* Power Management Hooks */
1696 .suspend = atl2_suspend,
1697 #ifdef CONFIG_PM
1698 .resume = atl2_resume,
1699 #endif
1700 .shutdown = atl2_shutdown,
1701 };
1702
1703 /**
1704 * atl2_init_module - Driver Registration Routine
1705 *
1706 * atl2_init_module is the first routine called when the driver is
1707 * loaded. All it does is register with the PCI subsystem.
1708 */
1709 static int __init atl2_init_module(void)
1710 {
1711 printk(KERN_INFO "%s - version %s\n", atl2_driver_string,
1712 atl2_driver_version);
1713 printk(KERN_INFO "%s\n", atl2_copyright);
1714 return pci_register_driver(&atl2_driver);
1715 }
1716 module_init(atl2_init_module);
1717
1718 /**
1719 * atl2_exit_module - Driver Exit Cleanup Routine
1720 *
1721 * atl2_exit_module is called just before the driver is removed
1722 * from memory.
1723 */
1724 static void __exit atl2_exit_module(void)
1725 {
1726 pci_unregister_driver(&atl2_driver);
1727 }
1728 module_exit(atl2_exit_module);
1729
1730 static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1731 {
1732 struct atl2_adapter *adapter = hw->back;
1733 pci_read_config_word(adapter->pdev, reg, value);
1734 }
1735
1736 static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1737 {
1738 struct atl2_adapter *adapter = hw->back;
1739 pci_write_config_word(adapter->pdev, reg, *value);
1740 }
1741
1742 static int atl2_get_settings(struct net_device *netdev,
1743 struct ethtool_cmd *ecmd)
1744 {
1745 struct atl2_adapter *adapter = netdev_priv(netdev);
1746 struct atl2_hw *hw = &adapter->hw;
1747
1748 ecmd->supported = (SUPPORTED_10baseT_Half |
1749 SUPPORTED_10baseT_Full |
1750 SUPPORTED_100baseT_Half |
1751 SUPPORTED_100baseT_Full |
1752 SUPPORTED_Autoneg |
1753 SUPPORTED_TP);
1754 ecmd->advertising = ADVERTISED_TP;
1755
1756 ecmd->advertising |= ADVERTISED_Autoneg;
1757 ecmd->advertising |= hw->autoneg_advertised;
1758
1759 ecmd->port = PORT_TP;
1760 ecmd->phy_address = 0;
1761 ecmd->transceiver = XCVR_INTERNAL;
1762
1763 if (adapter->link_speed != SPEED_0) {
1764 ethtool_cmd_speed_set(ecmd, adapter->link_speed);
1765 if (adapter->link_duplex == FULL_DUPLEX)
1766 ecmd->duplex = DUPLEX_FULL;
1767 else
1768 ecmd->duplex = DUPLEX_HALF;
1769 } else {
1770 ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
1771 ecmd->duplex = DUPLEX_UNKNOWN;
1772 }
1773
1774 ecmd->autoneg = AUTONEG_ENABLE;
1775 return 0;
1776 }
1777
1778 static int atl2_set_settings(struct net_device *netdev,
1779 struct ethtool_cmd *ecmd)
1780 {
1781 struct atl2_adapter *adapter = netdev_priv(netdev);
1782 struct atl2_hw *hw = &adapter->hw;
1783
1784 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1785 msleep(1);
1786
1787 if (ecmd->autoneg == AUTONEG_ENABLE) {
1788 #define MY_ADV_MASK (ADVERTISE_10_HALF | \
1789 ADVERTISE_10_FULL | \
1790 ADVERTISE_100_HALF| \
1791 ADVERTISE_100_FULL)
1792
1793 if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
1794 hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
1795 hw->autoneg_advertised = MY_ADV_MASK;
1796 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1797 ADVERTISE_100_FULL) {
1798 hw->MediaType = MEDIA_TYPE_100M_FULL;
1799 hw->autoneg_advertised = ADVERTISE_100_FULL;
1800 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1801 ADVERTISE_100_HALF) {
1802 hw->MediaType = MEDIA_TYPE_100M_HALF;
1803 hw->autoneg_advertised = ADVERTISE_100_HALF;
1804 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1805 ADVERTISE_10_FULL) {
1806 hw->MediaType = MEDIA_TYPE_10M_FULL;
1807 hw->autoneg_advertised = ADVERTISE_10_FULL;
1808 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1809 ADVERTISE_10_HALF) {
1810 hw->MediaType = MEDIA_TYPE_10M_HALF;
1811 hw->autoneg_advertised = ADVERTISE_10_HALF;
1812 } else {
1813 clear_bit(__ATL2_RESETTING, &adapter->flags);
1814 return -EINVAL;
1815 }
1816 ecmd->advertising = hw->autoneg_advertised |
1817 ADVERTISED_TP | ADVERTISED_Autoneg;
1818 } else {
1819 clear_bit(__ATL2_RESETTING, &adapter->flags);
1820 return -EINVAL;
1821 }
1822
1823 /* reset the link */
1824 if (netif_running(adapter->netdev)) {
1825 atl2_down(adapter);
1826 atl2_up(adapter);
1827 } else
1828 atl2_reset_hw(&adapter->hw);
1829
1830 clear_bit(__ATL2_RESETTING, &adapter->flags);
1831 return 0;
1832 }
1833
1834 static u32 atl2_get_msglevel(struct net_device *netdev)
1835 {
1836 return 0;
1837 }
1838
1839 /*
1840 * It's sane for this to be empty, but we might want to take advantage of this.
1841 */
1842 static void atl2_set_msglevel(struct net_device *netdev, u32 data)
1843 {
1844 }
1845
1846 static int atl2_get_regs_len(struct net_device *netdev)
1847 {
1848 #define ATL2_REGS_LEN 42
1849 return sizeof(u32) * ATL2_REGS_LEN;
1850 }
1851
1852 static void atl2_get_regs(struct net_device *netdev,
1853 struct ethtool_regs *regs, void *p)
1854 {
1855 struct atl2_adapter *adapter = netdev_priv(netdev);
1856 struct atl2_hw *hw = &adapter->hw;
1857 u32 *regs_buff = p;
1858 u16 phy_data;
1859
1860 memset(p, 0, sizeof(u32) * ATL2_REGS_LEN);
1861
1862 regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
1863
1864 regs_buff[0] = ATL2_READ_REG(hw, REG_VPD_CAP);
1865 regs_buff[1] = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
1866 regs_buff[2] = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG);
1867 regs_buff[3] = ATL2_READ_REG(hw, REG_TWSI_CTRL);
1868 regs_buff[4] = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
1869 regs_buff[5] = ATL2_READ_REG(hw, REG_MASTER_CTRL);
1870 regs_buff[6] = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT);
1871 regs_buff[7] = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
1872 regs_buff[8] = ATL2_READ_REG(hw, REG_PHY_ENABLE);
1873 regs_buff[9] = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER);
1874 regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS);
1875 regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL);
1876 regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK);
1877 regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL);
1878 regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG);
1879 regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
1880 regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4);
1881 regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE);
1882 regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4);
1883 regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
1884 regs_buff[20] = ATL2_READ_REG(hw, REG_MTU);
1885 regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL);
1886 regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END);
1887 regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI);
1888 regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO);
1889 regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE);
1890 regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO);
1891 regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE);
1892 regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO);
1893 regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM);
1894 regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR);
1895 regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH);
1896 regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW);
1897 regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH);
1898 regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH);
1899 regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX);
1900 regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX);
1901 regs_buff[38] = ATL2_READ_REG(hw, REG_ISR);
1902 regs_buff[39] = ATL2_READ_REG(hw, REG_IMR);
1903
1904 atl2_read_phy_reg(hw, MII_BMCR, &phy_data);
1905 regs_buff[40] = (u32)phy_data;
1906 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1907 regs_buff[41] = (u32)phy_data;
1908 }
1909
1910 static int atl2_get_eeprom_len(struct net_device *netdev)
1911 {
1912 struct atl2_adapter *adapter = netdev_priv(netdev);
1913
1914 if (!atl2_check_eeprom_exist(&adapter->hw))
1915 return 512;
1916 else
1917 return 0;
1918 }
1919
1920 static int atl2_get_eeprom(struct net_device *netdev,
1921 struct ethtool_eeprom *eeprom, u8 *bytes)
1922 {
1923 struct atl2_adapter *adapter = netdev_priv(netdev);
1924 struct atl2_hw *hw = &adapter->hw;
1925 u32 *eeprom_buff;
1926 int first_dword, last_dword;
1927 int ret_val = 0;
1928 int i;
1929
1930 if (eeprom->len == 0)
1931 return -EINVAL;
1932
1933 if (atl2_check_eeprom_exist(hw))
1934 return -EINVAL;
1935
1936 eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1937
1938 first_dword = eeprom->offset >> 2;
1939 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
1940
1941 eeprom_buff = kmalloc(sizeof(u32) * (last_dword - first_dword + 1),
1942 GFP_KERNEL);
1943 if (!eeprom_buff)
1944 return -ENOMEM;
1945
1946 for (i = first_dword; i < last_dword; i++) {
1947 if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) {
1948 ret_val = -EIO;
1949 goto free;
1950 }
1951 }
1952
1953 memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
1954 eeprom->len);
1955 free:
1956 kfree(eeprom_buff);
1957
1958 return ret_val;
1959 }
1960
1961 static int atl2_set_eeprom(struct net_device *netdev,
1962 struct ethtool_eeprom *eeprom, u8 *bytes)
1963 {
1964 struct atl2_adapter *adapter = netdev_priv(netdev);
1965 struct atl2_hw *hw = &adapter->hw;
1966 u32 *eeprom_buff;
1967 u32 *ptr;
1968 int max_len, first_dword, last_dword, ret_val = 0;
1969 int i;
1970
1971 if (eeprom->len == 0)
1972 return -EOPNOTSUPP;
1973
1974 if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
1975 return -EFAULT;
1976
1977 max_len = 512;
1978
1979 first_dword = eeprom->offset >> 2;
1980 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
1981 eeprom_buff = kmalloc(max_len, GFP_KERNEL);
1982 if (!eeprom_buff)
1983 return -ENOMEM;
1984
1985 ptr = eeprom_buff;
1986
1987 if (eeprom->offset & 3) {
1988 /* need read/modify/write of first changed EEPROM word */
1989 /* only the second byte of the word is being modified */
1990 if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0]))) {
1991 ret_val = -EIO;
1992 goto out;
1993 }
1994 ptr++;
1995 }
1996 if (((eeprom->offset + eeprom->len) & 3)) {
1997 /*
1998 * need read/modify/write of last changed EEPROM word
1999 * only the first byte of the word is being modified
2000 */
2001 if (!atl2_read_eeprom(hw, last_dword * 4,
2002 &(eeprom_buff[last_dword - first_dword]))) {
2003 ret_val = -EIO;
2004 goto out;
2005 }
2006 }
2007
2008 /* Device's eeprom is always little-endian, word addressable */
2009 memcpy(ptr, bytes, eeprom->len);
2010
2011 for (i = 0; i < last_dword - first_dword + 1; i++) {
2012 if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i])) {
2013 ret_val = -EIO;
2014 goto out;
2015 }
2016 }
2017 out:
2018 kfree(eeprom_buff);
2019 return ret_val;
2020 }
2021
2022 static void atl2_get_drvinfo(struct net_device *netdev,
2023 struct ethtool_drvinfo *drvinfo)
2024 {
2025 struct atl2_adapter *adapter = netdev_priv(netdev);
2026
2027 strlcpy(drvinfo->driver, atl2_driver_name, sizeof(drvinfo->driver));
2028 strlcpy(drvinfo->version, atl2_driver_version,
2029 sizeof(drvinfo->version));
2030 strlcpy(drvinfo->fw_version, "L2", sizeof(drvinfo->fw_version));
2031 strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
2032 sizeof(drvinfo->bus_info));
2033 }
2034
2035 static void atl2_get_wol(struct net_device *netdev,
2036 struct ethtool_wolinfo *wol)
2037 {
2038 struct atl2_adapter *adapter = netdev_priv(netdev);
2039
2040 wol->supported = WAKE_MAGIC;
2041 wol->wolopts = 0;
2042
2043 if (adapter->wol & ATLX_WUFC_EX)
2044 wol->wolopts |= WAKE_UCAST;
2045 if (adapter->wol & ATLX_WUFC_MC)
2046 wol->wolopts |= WAKE_MCAST;
2047 if (adapter->wol & ATLX_WUFC_BC)
2048 wol->wolopts |= WAKE_BCAST;
2049 if (adapter->wol & ATLX_WUFC_MAG)
2050 wol->wolopts |= WAKE_MAGIC;
2051 if (adapter->wol & ATLX_WUFC_LNKC)
2052 wol->wolopts |= WAKE_PHY;
2053 }
2054
2055 static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2056 {
2057 struct atl2_adapter *adapter = netdev_priv(netdev);
2058
2059 if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
2060 return -EOPNOTSUPP;
2061
2062 if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
2063 return -EOPNOTSUPP;
2064
2065 /* these settings will always override what we currently have */
2066 adapter->wol = 0;
2067
2068 if (wol->wolopts & WAKE_MAGIC)
2069 adapter->wol |= ATLX_WUFC_MAG;
2070 if (wol->wolopts & WAKE_PHY)
2071 adapter->wol |= ATLX_WUFC_LNKC;
2072
2073 return 0;
2074 }
2075
2076 static int atl2_nway_reset(struct net_device *netdev)
2077 {
2078 struct atl2_adapter *adapter = netdev_priv(netdev);
2079 if (netif_running(netdev))
2080 atl2_reinit_locked(adapter);
2081 return 0;
2082 }
2083
2084 static const struct ethtool_ops atl2_ethtool_ops = {
2085 .get_settings = atl2_get_settings,
2086 .set_settings = atl2_set_settings,
2087 .get_drvinfo = atl2_get_drvinfo,
2088 .get_regs_len = atl2_get_regs_len,
2089 .get_regs = atl2_get_regs,
2090 .get_wol = atl2_get_wol,
2091 .set_wol = atl2_set_wol,
2092 .get_msglevel = atl2_get_msglevel,
2093 .set_msglevel = atl2_set_msglevel,
2094 .nway_reset = atl2_nway_reset,
2095 .get_link = ethtool_op_get_link,
2096 .get_eeprom_len = atl2_get_eeprom_len,
2097 .get_eeprom = atl2_get_eeprom,
2098 .set_eeprom = atl2_set_eeprom,
2099 };
2100
2101 #define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \
2102 (((a) & 0xff00ff00) >> 8))
2103 #define LONGSWAP(a) ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
2104 #define SHORTSWAP(a) (((a) << 8) | ((a) >> 8))
2105
2106 /*
2107 * Reset the transmit and receive units; mask and clear all interrupts.
2108 *
2109 * hw - Struct containing variables accessed by shared code
2110 * return : 0 or idle status (if error)
2111 */
2112 static s32 atl2_reset_hw(struct atl2_hw *hw)
2113 {
2114 u32 icr;
2115 u16 pci_cfg_cmd_word;
2116 int i;
2117
2118 /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
2119 atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2120 if ((pci_cfg_cmd_word &
2121 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) !=
2122 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) {
2123 pci_cfg_cmd_word |=
2124 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER);
2125 atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2126 }
2127
2128 /* Clear Interrupt mask to stop board from generating
2129 * interrupts & Clear any pending interrupt events
2130 */
2131 /* FIXME */
2132 /* ATL2_WRITE_REG(hw, REG_IMR, 0); */
2133 /* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */
2134
2135 /* Issue Soft Reset to the MAC. This will reset the chip's
2136 * transmit, receive, DMA. It will not effect
2137 * the current PCI configuration. The global reset bit is self-
2138 * clearing, and should clear within a microsecond.
2139 */
2140 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
2141 wmb();
2142 msleep(1); /* delay about 1ms */
2143
2144 /* Wait at least 10ms for All module to be Idle */
2145 for (i = 0; i < 10; i++) {
2146 icr = ATL2_READ_REG(hw, REG_IDLE_STATUS);
2147 if (!icr)
2148 break;
2149 msleep(1); /* delay 1 ms */
2150 cpu_relax();
2151 }
2152
2153 if (icr)
2154 return icr;
2155
2156 return 0;
2157 }
2158
2159 #define CUSTOM_SPI_CS_SETUP 2
2160 #define CUSTOM_SPI_CLK_HI 2
2161 #define CUSTOM_SPI_CLK_LO 2
2162 #define CUSTOM_SPI_CS_HOLD 2
2163 #define CUSTOM_SPI_CS_HI 3
2164
2165 static struct atl2_spi_flash_dev flash_table[] =
2166 {
2167 /* MFR WRSR READ PROGRAM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
2168 {"Atmel", 0x0, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62 },
2169 {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60 },
2170 {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7 },
2171 };
2172
2173 static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf)
2174 {
2175 int i;
2176 u32 value;
2177
2178 ATL2_WRITE_REG(hw, REG_SPI_DATA, 0);
2179 ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr);
2180
2181 value = SPI_FLASH_CTRL_WAIT_READY |
2182 (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
2183 SPI_FLASH_CTRL_CS_SETUP_SHIFT |
2184 (CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) <<
2185 SPI_FLASH_CTRL_CLK_HI_SHIFT |
2186 (CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) <<
2187 SPI_FLASH_CTRL_CLK_LO_SHIFT |
2188 (CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) <<
2189 SPI_FLASH_CTRL_CS_HOLD_SHIFT |
2190 (CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) <<
2191 SPI_FLASH_CTRL_CS_HI_SHIFT |
2192 (0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT;
2193
2194 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2195
2196 value |= SPI_FLASH_CTRL_START;
2197
2198 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2199
2200 for (i = 0; i < 10; i++) {
2201 msleep(1);
2202 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2203 if (!(value & SPI_FLASH_CTRL_START))
2204 break;
2205 }
2206
2207 if (value & SPI_FLASH_CTRL_START)
2208 return false;
2209
2210 *buf = ATL2_READ_REG(hw, REG_SPI_DATA);
2211
2212 return true;
2213 }
2214
2215 /*
2216 * get_permanent_address
2217 * return 0 if get valid mac address,
2218 */
2219 static int get_permanent_address(struct atl2_hw *hw)
2220 {
2221 u32 Addr[2];
2222 u32 i, Control;
2223 u16 Register;
2224 u8 EthAddr[ETH_ALEN];
2225 bool KeyValid;
2226
2227 if (is_valid_ether_addr(hw->perm_mac_addr))
2228 return 0;
2229
2230 Addr[0] = 0;
2231 Addr[1] = 0;
2232
2233 if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */
2234 Register = 0;
2235 KeyValid = false;
2236
2237 /* Read out all EEPROM content */
2238 i = 0;
2239 while (1) {
2240 if (atl2_read_eeprom(hw, i + 0x100, &Control)) {
2241 if (KeyValid) {
2242 if (Register == REG_MAC_STA_ADDR)
2243 Addr[0] = Control;
2244 else if (Register ==
2245 (REG_MAC_STA_ADDR + 4))
2246 Addr[1] = Control;
2247 KeyValid = false;
2248 } else if ((Control & 0xff) == 0x5A) {
2249 KeyValid = true;
2250 Register = (u16) (Control >> 16);
2251 } else {
2252 /* assume data end while encount an invalid KEYWORD */
2253 break;
2254 }
2255 } else {
2256 break; /* read error */
2257 }
2258 i += 4;
2259 }
2260
2261 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2262 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2263
2264 if (is_valid_ether_addr(EthAddr)) {
2265 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2266 return 0;
2267 }
2268 return 1;
2269 }
2270
2271 /* see if SPI flash exists? */
2272 Addr[0] = 0;
2273 Addr[1] = 0;
2274 Register = 0;
2275 KeyValid = false;
2276 i = 0;
2277 while (1) {
2278 if (atl2_spi_read(hw, i + 0x1f000, &Control)) {
2279 if (KeyValid) {
2280 if (Register == REG_MAC_STA_ADDR)
2281 Addr[0] = Control;
2282 else if (Register == (REG_MAC_STA_ADDR + 4))
2283 Addr[1] = Control;
2284 KeyValid = false;
2285 } else if ((Control & 0xff) == 0x5A) {
2286 KeyValid = true;
2287 Register = (u16) (Control >> 16);
2288 } else {
2289 break; /* data end */
2290 }
2291 } else {
2292 break; /* read error */
2293 }
2294 i += 4;
2295 }
2296
2297 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2298 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
2299 if (is_valid_ether_addr(EthAddr)) {
2300 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2301 return 0;
2302 }
2303 /* maybe MAC-address is from BIOS */
2304 Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
2305 Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4);
2306 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2307 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2308
2309 if (is_valid_ether_addr(EthAddr)) {
2310 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2311 return 0;
2312 }
2313
2314 return 1;
2315 }
2316
2317 /*
2318 * Reads the adapter's MAC address from the EEPROM
2319 *
2320 * hw - Struct containing variables accessed by shared code
2321 */
2322 static s32 atl2_read_mac_addr(struct atl2_hw *hw)
2323 {
2324 if (get_permanent_address(hw)) {
2325 /* for test */
2326 /* FIXME: shouldn't we use eth_random_addr() here? */
2327 hw->perm_mac_addr[0] = 0x00;
2328 hw->perm_mac_addr[1] = 0x13;
2329 hw->perm_mac_addr[2] = 0x74;
2330 hw->perm_mac_addr[3] = 0x00;
2331 hw->perm_mac_addr[4] = 0x5c;
2332 hw->perm_mac_addr[5] = 0x38;
2333 }
2334
2335 memcpy(hw->mac_addr, hw->perm_mac_addr, ETH_ALEN);
2336
2337 return 0;
2338 }
2339
2340 /*
2341 * Hashes an address to determine its location in the multicast table
2342 *
2343 * hw - Struct containing variables accessed by shared code
2344 * mc_addr - the multicast address to hash
2345 *
2346 * atl2_hash_mc_addr
2347 * purpose
2348 * set hash value for a multicast address
2349 * hash calcu processing :
2350 * 1. calcu 32bit CRC for multicast address
2351 * 2. reverse crc with MSB to LSB
2352 */
2353 static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr)
2354 {
2355 u32 crc32, value;
2356 int i;
2357
2358 value = 0;
2359 crc32 = ether_crc_le(6, mc_addr);
2360
2361 for (i = 0; i < 32; i++)
2362 value |= (((crc32 >> i) & 1) << (31 - i));
2363
2364 return value;
2365 }
2366
2367 /*
2368 * Sets the bit in the multicast table corresponding to the hash value.
2369 *
2370 * hw - Struct containing variables accessed by shared code
2371 * hash_value - Multicast address hash value
2372 */
2373 static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value)
2374 {
2375 u32 hash_bit, hash_reg;
2376 u32 mta;
2377
2378 /* The HASH Table is a register array of 2 32-bit registers.
2379 * It is treated like an array of 64 bits. We want to set
2380 * bit BitArray[hash_value]. So we figure out what register
2381 * the bit is in, read it, OR in the new bit, then write
2382 * back the new value. The register is determined by the
2383 * upper 7 bits of the hash value and the bit within that
2384 * register are determined by the lower 5 bits of the value.
2385 */
2386 hash_reg = (hash_value >> 31) & 0x1;
2387 hash_bit = (hash_value >> 26) & 0x1F;
2388
2389 mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
2390
2391 mta |= (1 << hash_bit);
2392
2393 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
2394 }
2395
2396 /*
2397 * atl2_init_pcie - init PCIE module
2398 */
2399 static void atl2_init_pcie(struct atl2_hw *hw)
2400 {
2401 u32 value;
2402 value = LTSSM_TEST_MODE_DEF;
2403 ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
2404
2405 value = PCIE_DLL_TX_CTRL1_DEF;
2406 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value);
2407 }
2408
2409 static void atl2_init_flash_opcode(struct atl2_hw *hw)
2410 {
2411 if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
2412 hw->flash_vendor = 0; /* ATMEL */
2413
2414 /* Init OP table */
2415 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM,
2416 flash_table[hw->flash_vendor].cmdPROGRAM);
2417 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE,
2418 flash_table[hw->flash_vendor].cmdSECTOR_ERASE);
2419 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
2420 flash_table[hw->flash_vendor].cmdCHIP_ERASE);
2421 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID,
2422 flash_table[hw->flash_vendor].cmdRDID);
2423 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN,
2424 flash_table[hw->flash_vendor].cmdWREN);
2425 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR,
2426 flash_table[hw->flash_vendor].cmdRDSR);
2427 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR,
2428 flash_table[hw->flash_vendor].cmdWRSR);
2429 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ,
2430 flash_table[hw->flash_vendor].cmdREAD);
2431 }
2432
2433 /********************************************************************
2434 * Performs basic configuration of the adapter.
2435 *
2436 * hw - Struct containing variables accessed by shared code
2437 * Assumes that the controller has previously been reset and is in a
2438 * post-reset uninitialized state. Initializes multicast table,
2439 * and Calls routines to setup link
2440 * Leaves the transmit and receive units disabled and uninitialized.
2441 ********************************************************************/
2442 static s32 atl2_init_hw(struct atl2_hw *hw)
2443 {
2444 u32 ret_val = 0;
2445
2446 atl2_init_pcie(hw);
2447
2448 /* Zero out the Multicast HASH table */
2449 /* clear the old settings from the multicast hash table */
2450 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
2451 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
2452
2453 atl2_init_flash_opcode(hw);
2454
2455 ret_val = atl2_phy_init(hw);
2456
2457 return ret_val;
2458 }
2459
2460 /*
2461 * Detects the current speed and duplex settings of the hardware.
2462 *
2463 * hw - Struct containing variables accessed by shared code
2464 * speed - Speed of the connection
2465 * duplex - Duplex setting of the connection
2466 */
2467 static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
2468 u16 *duplex)
2469 {
2470 s32 ret_val;
2471 u16 phy_data;
2472
2473 /* Read PHY Specific Status Register (17) */
2474 ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
2475 if (ret_val)
2476 return ret_val;
2477
2478 if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
2479 return ATLX_ERR_PHY_RES;
2480
2481 switch (phy_data & MII_ATLX_PSSR_SPEED) {
2482 case MII_ATLX_PSSR_100MBS:
2483 *speed = SPEED_100;
2484 break;
2485 case MII_ATLX_PSSR_10MBS:
2486 *speed = SPEED_10;
2487 break;
2488 default:
2489 return ATLX_ERR_PHY_SPEED;
2490 }
2491
2492 if (phy_data & MII_ATLX_PSSR_DPLX)
2493 *duplex = FULL_DUPLEX;
2494 else
2495 *duplex = HALF_DUPLEX;
2496
2497 return 0;
2498 }
2499
2500 /*
2501 * Reads the value from a PHY register
2502 * hw - Struct containing variables accessed by shared code
2503 * reg_addr - address of the PHY register to read
2504 */
2505 static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data)
2506 {
2507 u32 val;
2508 int i;
2509
2510 val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
2511 MDIO_START |
2512 MDIO_SUP_PREAMBLE |
2513 MDIO_RW |
2514 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2515 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2516
2517 wmb();
2518
2519 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2520 udelay(2);
2521 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2522 if (!(val & (MDIO_START | MDIO_BUSY)))
2523 break;
2524 wmb();
2525 }
2526 if (!(val & (MDIO_START | MDIO_BUSY))) {
2527 *phy_data = (u16)val;
2528 return 0;
2529 }
2530
2531 return ATLX_ERR_PHY;
2532 }
2533
2534 /*
2535 * Writes a value to a PHY register
2536 * hw - Struct containing variables accessed by shared code
2537 * reg_addr - address of the PHY register to write
2538 * data - data to write to the PHY
2539 */
2540 static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data)
2541 {
2542 int i;
2543 u32 val;
2544
2545 val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
2546 (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
2547 MDIO_SUP_PREAMBLE |
2548 MDIO_START |
2549 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2550 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2551
2552 wmb();
2553
2554 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2555 udelay(2);
2556 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2557 if (!(val & (MDIO_START | MDIO_BUSY)))
2558 break;
2559
2560 wmb();
2561 }
2562
2563 if (!(val & (MDIO_START | MDIO_BUSY)))
2564 return 0;
2565
2566 return ATLX_ERR_PHY;
2567 }
2568
2569 /*
2570 * Configures PHY autoneg and flow control advertisement settings
2571 *
2572 * hw - Struct containing variables accessed by shared code
2573 */
2574 static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
2575 {
2576 s32 ret_val;
2577 s16 mii_autoneg_adv_reg;
2578
2579 /* Read the MII Auto-Neg Advertisement Register (Address 4). */
2580 mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
2581
2582 /* Need to parse autoneg_advertised and set up
2583 * the appropriate PHY registers. First we will parse for
2584 * autoneg_advertised software override. Since we can advertise
2585 * a plethora of combinations, we need to check each bit
2586 * individually.
2587 */
2588
2589 /* First we clear all the 10/100 mb speed bits in the Auto-Neg
2590 * Advertisement Register (Address 4) and the 1000 mb speed bits in
2591 * the 1000Base-T Control Register (Address 9). */
2592 mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
2593
2594 /* Need to parse MediaType and setup the
2595 * appropriate PHY registers. */
2596 switch (hw->MediaType) {
2597 case MEDIA_TYPE_AUTO_SENSOR:
2598 mii_autoneg_adv_reg |=
2599 (MII_AR_10T_HD_CAPS |
2600 MII_AR_10T_FD_CAPS |
2601 MII_AR_100TX_HD_CAPS|
2602 MII_AR_100TX_FD_CAPS);
2603 hw->autoneg_advertised =
2604 ADVERTISE_10_HALF |
2605 ADVERTISE_10_FULL |
2606 ADVERTISE_100_HALF|
2607 ADVERTISE_100_FULL;
2608 break;
2609 case MEDIA_TYPE_100M_FULL:
2610 mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
2611 hw->autoneg_advertised = ADVERTISE_100_FULL;
2612 break;
2613 case MEDIA_TYPE_100M_HALF:
2614 mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
2615 hw->autoneg_advertised = ADVERTISE_100_HALF;
2616 break;
2617 case MEDIA_TYPE_10M_FULL:
2618 mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
2619 hw->autoneg_advertised = ADVERTISE_10_FULL;
2620 break;
2621 default:
2622 mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
2623 hw->autoneg_advertised = ADVERTISE_10_HALF;
2624 break;
2625 }
2626
2627 /* flow control fixed to enable all */
2628 mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
2629
2630 hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
2631
2632 ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
2633
2634 if (ret_val)
2635 return ret_val;
2636
2637 return 0;
2638 }
2639
2640 /*
2641 * Resets the PHY and make all config validate
2642 *
2643 * hw - Struct containing variables accessed by shared code
2644 *
2645 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
2646 */
2647 static s32 atl2_phy_commit(struct atl2_hw *hw)
2648 {
2649 s32 ret_val;
2650 u16 phy_data;
2651
2652 phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
2653 ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data);
2654 if (ret_val) {
2655 u32 val;
2656 int i;
2657 /* pcie serdes link may be down ! */
2658 for (i = 0; i < 25; i++) {
2659 msleep(1);
2660 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2661 if (!(val & (MDIO_START | MDIO_BUSY)))
2662 break;
2663 }
2664
2665 if (0 != (val & (MDIO_START | MDIO_BUSY))) {
2666 printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
2667 return ret_val;
2668 }
2669 }
2670 return 0;
2671 }
2672
2673 static s32 atl2_phy_init(struct atl2_hw *hw)
2674 {
2675 s32 ret_val;
2676 u16 phy_val;
2677
2678 if (hw->phy_configured)
2679 return 0;
2680
2681 /* Enable PHY */
2682 ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1);
2683 ATL2_WRITE_FLUSH(hw);
2684 msleep(1);
2685
2686 /* check if the PHY is in powersaving mode */
2687 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2688 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2689
2690 /* 024E / 124E 0r 0274 / 1274 ? */
2691 if (phy_val & 0x1000) {
2692 phy_val &= ~0x1000;
2693 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val);
2694 }
2695
2696 msleep(1);
2697
2698 /*Enable PHY LinkChange Interrupt */
2699 ret_val = atl2_write_phy_reg(hw, 18, 0xC00);
2700 if (ret_val)
2701 return ret_val;
2702
2703 /* setup AutoNeg parameters */
2704 ret_val = atl2_phy_setup_autoneg_adv(hw);
2705 if (ret_val)
2706 return ret_val;
2707
2708 /* SW.Reset & En-Auto-Neg to restart Auto-Neg */
2709 ret_val = atl2_phy_commit(hw);
2710 if (ret_val)
2711 return ret_val;
2712
2713 hw->phy_configured = true;
2714
2715 return ret_val;
2716 }
2717
2718 static void atl2_set_mac_addr(struct atl2_hw *hw)
2719 {
2720 u32 value;
2721 /* 00-0B-6A-F6-00-DC
2722 * 0: 6AF600DC 1: 000B
2723 * low dword */
2724 value = (((u32)hw->mac_addr[2]) << 24) |
2725 (((u32)hw->mac_addr[3]) << 16) |
2726 (((u32)hw->mac_addr[4]) << 8) |
2727 (((u32)hw->mac_addr[5]));
2728 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
2729 /* hight dword */
2730 value = (((u32)hw->mac_addr[0]) << 8) |
2731 (((u32)hw->mac_addr[1]));
2732 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
2733 }
2734
2735 /*
2736 * check_eeprom_exist
2737 * return 0 if eeprom exist
2738 */
2739 static int atl2_check_eeprom_exist(struct atl2_hw *hw)
2740 {
2741 u32 value;
2742
2743 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2744 if (value & SPI_FLASH_CTRL_EN_VPD) {
2745 value &= ~SPI_FLASH_CTRL_EN_VPD;
2746 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2747 }
2748 value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST);
2749 return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
2750 }
2751
2752 /* FIXME: This doesn't look right. -- CHS */
2753 static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value)
2754 {
2755 return true;
2756 }
2757
2758 static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue)
2759 {
2760 int i;
2761 u32 Control;
2762
2763 if (Offset & 0x3)
2764 return false; /* address do not align */
2765
2766 ATL2_WRITE_REG(hw, REG_VPD_DATA, 0);
2767 Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
2768 ATL2_WRITE_REG(hw, REG_VPD_CAP, Control);
2769
2770 for (i = 0; i < 10; i++) {
2771 msleep(2);
2772 Control = ATL2_READ_REG(hw, REG_VPD_CAP);
2773 if (Control & VPD_CAP_VPD_FLAG)
2774 break;
2775 }
2776
2777 if (Control & VPD_CAP_VPD_FLAG) {
2778 *pValue = ATL2_READ_REG(hw, REG_VPD_DATA);
2779 return true;
2780 }
2781 return false; /* timeout */
2782 }
2783
2784 static void atl2_force_ps(struct atl2_hw *hw)
2785 {
2786 u16 phy_val;
2787
2788 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2789 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2790 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000);
2791
2792 atl2_write_phy_reg(hw, MII_DBG_ADDR, 2);
2793 atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
2794 atl2_write_phy_reg(hw, MII_DBG_ADDR, 3);
2795 atl2_write_phy_reg(hw, MII_DBG_DATA, 0);
2796 }
2797
2798 /* This is the only thing that needs to be changed to adjust the
2799 * maximum number of ports that the driver can manage.
2800 */
2801 #define ATL2_MAX_NIC 4
2802
2803 #define OPTION_UNSET -1
2804 #define OPTION_DISABLED 0
2805 #define OPTION_ENABLED 1
2806
2807 /* All parameters are treated the same, as an integer array of values.
2808 * This macro just reduces the need to repeat the same declaration code
2809 * over and over (plus this helps to avoid typo bugs).
2810 */
2811 #define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET}
2812 #ifndef module_param_array
2813 /* Module Parameters are always initialized to -1, so that the driver
2814 * can tell the difference between no user specified value or the
2815 * user asking for the default value.
2816 * The true default values are loaded in when atl2_check_options is called.
2817 *
2818 * This is a GCC extension to ANSI C.
2819 * See the item "Labeled Elements in Initializers" in the section
2820 * "Extensions to the C Language Family" of the GCC documentation.
2821 */
2822
2823 #define ATL2_PARAM(X, desc) \
2824 static const int X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
2825 MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
2826 MODULE_PARM_DESC(X, desc);
2827 #else
2828 #define ATL2_PARAM(X, desc) \
2829 static int X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
2830 static unsigned int num_##X; \
2831 module_param_array_named(X, X, int, &num_##X, 0); \
2832 MODULE_PARM_DESC(X, desc);
2833 #endif
2834
2835 /*
2836 * Transmit Memory Size
2837 * Valid Range: 64-2048
2838 * Default Value: 128
2839 */
2840 #define ATL2_MIN_TX_MEMSIZE 4 /* 4KB */
2841 #define ATL2_MAX_TX_MEMSIZE 64 /* 64KB */
2842 #define ATL2_DEFAULT_TX_MEMSIZE 8 /* 8KB */
2843 ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory");
2844
2845 /*
2846 * Receive Memory Block Count
2847 * Valid Range: 16-512
2848 * Default Value: 128
2849 */
2850 #define ATL2_MIN_RXD_COUNT 16
2851 #define ATL2_MAX_RXD_COUNT 512
2852 #define ATL2_DEFAULT_RXD_COUNT 64
2853 ATL2_PARAM(RxMemBlock, "Number of receive memory block");
2854
2855 /*
2856 * User Specified MediaType Override
2857 *
2858 * Valid Range: 0-5
2859 * - 0 - auto-negotiate at all supported speeds
2860 * - 1 - only link at 1000Mbps Full Duplex
2861 * - 2 - only link at 100Mbps Full Duplex
2862 * - 3 - only link at 100Mbps Half Duplex
2863 * - 4 - only link at 10Mbps Full Duplex
2864 * - 5 - only link at 10Mbps Half Duplex
2865 * Default Value: 0
2866 */
2867 ATL2_PARAM(MediaType, "MediaType Select");
2868
2869 /*
2870 * Interrupt Moderate Timer in units of 2048 ns (~2 us)
2871 * Valid Range: 10-65535
2872 * Default Value: 45000(90ms)
2873 */
2874 #define INT_MOD_DEFAULT_CNT 100 /* 200us */
2875 #define INT_MOD_MAX_CNT 65000
2876 #define INT_MOD_MIN_CNT 50
2877 ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer");
2878
2879 /*
2880 * FlashVendor
2881 * Valid Range: 0-2
2882 * 0 - Atmel
2883 * 1 - SST
2884 * 2 - ST
2885 */
2886 ATL2_PARAM(FlashVendor, "SPI Flash Vendor");
2887
2888 #define AUTONEG_ADV_DEFAULT 0x2F
2889 #define AUTONEG_ADV_MASK 0x2F
2890 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
2891
2892 #define FLASH_VENDOR_DEFAULT 0
2893 #define FLASH_VENDOR_MIN 0
2894 #define FLASH_VENDOR_MAX 2
2895
2896 struct atl2_option {
2897 enum { enable_option, range_option, list_option } type;
2898 char *name;
2899 char *err;
2900 int def;
2901 union {
2902 struct { /* range_option info */
2903 int min;
2904 int max;
2905 } r;
2906 struct { /* list_option info */
2907 int nr;
2908 struct atl2_opt_list { int i; char *str; } *p;
2909 } l;
2910 } arg;
2911 };
2912
2913 static int atl2_validate_option(int *value, struct atl2_option *opt)
2914 {
2915 int i;
2916 struct atl2_opt_list *ent;
2917
2918 if (*value == OPTION_UNSET) {
2919 *value = opt->def;
2920 return 0;
2921 }
2922
2923 switch (opt->type) {
2924 case enable_option:
2925 switch (*value) {
2926 case OPTION_ENABLED:
2927 printk(KERN_INFO "%s Enabled\n", opt->name);
2928 return 0;
2929 case OPTION_DISABLED:
2930 printk(KERN_INFO "%s Disabled\n", opt->name);
2931 return 0;
2932 }
2933 break;
2934 case range_option:
2935 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
2936 printk(KERN_INFO "%s set to %i\n", opt->name, *value);
2937 return 0;
2938 }
2939 break;
2940 case list_option:
2941 for (i = 0; i < opt->arg.l.nr; i++) {
2942 ent = &opt->arg.l.p[i];
2943 if (*value == ent->i) {
2944 if (ent->str[0] != '\0')
2945 printk(KERN_INFO "%s\n", ent->str);
2946 return 0;
2947 }
2948 }
2949 break;
2950 default:
2951 BUG();
2952 }
2953
2954 printk(KERN_INFO "Invalid %s specified (%i) %s\n",
2955 opt->name, *value, opt->err);
2956 *value = opt->def;
2957 return -1;
2958 }
2959
2960 /**
2961 * atl2_check_options - Range Checking for Command Line Parameters
2962 * @adapter: board private structure
2963 *
2964 * This routine checks all command line parameters for valid user
2965 * input. If an invalid value is given, or if no user specified
2966 * value exists, a default value is used. The final value is stored
2967 * in a variable in the adapter structure.
2968 */
2969 static void atl2_check_options(struct atl2_adapter *adapter)
2970 {
2971 int val;
2972 struct atl2_option opt;
2973 int bd = adapter->bd_number;
2974 if (bd >= ATL2_MAX_NIC) {
2975 printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
2976 bd);
2977 printk(KERN_NOTICE "Using defaults for all values\n");
2978 #ifndef module_param_array
2979 bd = ATL2_MAX_NIC;
2980 #endif
2981 }
2982
2983 /* Bytes of Transmit Memory */
2984 opt.type = range_option;
2985 opt.name = "Bytes of Transmit Memory";
2986 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE);
2987 opt.def = ATL2_DEFAULT_TX_MEMSIZE;
2988 opt.arg.r.min = ATL2_MIN_TX_MEMSIZE;
2989 opt.arg.r.max = ATL2_MAX_TX_MEMSIZE;
2990 #ifdef module_param_array
2991 if (num_TxMemSize > bd) {
2992 #endif
2993 val = TxMemSize[bd];
2994 atl2_validate_option(&val, &opt);
2995 adapter->txd_ring_size = ((u32) val) * 1024;
2996 #ifdef module_param_array
2997 } else
2998 adapter->txd_ring_size = ((u32)opt.def) * 1024;
2999 #endif
3000 /* txs ring size: */
3001 adapter->txs_ring_size = adapter->txd_ring_size / 128;
3002 if (adapter->txs_ring_size > 160)
3003 adapter->txs_ring_size = 160;
3004
3005 /* Receive Memory Block Count */
3006 opt.type = range_option;
3007 opt.name = "Number of receive memory block";
3008 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT);
3009 opt.def = ATL2_DEFAULT_RXD_COUNT;
3010 opt.arg.r.min = ATL2_MIN_RXD_COUNT;
3011 opt.arg.r.max = ATL2_MAX_RXD_COUNT;
3012 #ifdef module_param_array
3013 if (num_RxMemBlock > bd) {
3014 #endif
3015 val = RxMemBlock[bd];
3016 atl2_validate_option(&val, &opt);
3017 adapter->rxd_ring_size = (u32)val;
3018 /* FIXME */
3019 /* ((u16)val)&~1; */ /* even number */
3020 #ifdef module_param_array
3021 } else
3022 adapter->rxd_ring_size = (u32)opt.def;
3023 #endif
3024 /* init RXD Flow control value */
3025 adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7;
3026 adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) >
3027 (adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) :
3028 (adapter->rxd_ring_size / 12);
3029
3030 /* Interrupt Moderate Timer */
3031 opt.type = range_option;
3032 opt.name = "Interrupt Moderate Timer";
3033 opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT);
3034 opt.def = INT_MOD_DEFAULT_CNT;
3035 opt.arg.r.min = INT_MOD_MIN_CNT;
3036 opt.arg.r.max = INT_MOD_MAX_CNT;
3037 #ifdef module_param_array
3038 if (num_IntModTimer > bd) {
3039 #endif
3040 val = IntModTimer[bd];
3041 atl2_validate_option(&val, &opt);
3042 adapter->imt = (u16) val;
3043 #ifdef module_param_array
3044 } else
3045 adapter->imt = (u16)(opt.def);
3046 #endif
3047 /* Flash Vendor */
3048 opt.type = range_option;
3049 opt.name = "SPI Flash Vendor";
3050 opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT);
3051 opt.def = FLASH_VENDOR_DEFAULT;
3052 opt.arg.r.min = FLASH_VENDOR_MIN;
3053 opt.arg.r.max = FLASH_VENDOR_MAX;
3054 #ifdef module_param_array
3055 if (num_FlashVendor > bd) {
3056 #endif
3057 val = FlashVendor[bd];
3058 atl2_validate_option(&val, &opt);
3059 adapter->hw.flash_vendor = (u8) val;
3060 #ifdef module_param_array
3061 } else
3062 adapter->hw.flash_vendor = (u8)(opt.def);
3063 #endif
3064 /* MediaType */
3065 opt.type = range_option;
3066 opt.name = "Speed/Duplex Selection";
3067 opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR);
3068 opt.def = MEDIA_TYPE_AUTO_SENSOR;
3069 opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR;
3070 opt.arg.r.max = MEDIA_TYPE_10M_HALF;
3071 #ifdef module_param_array
3072 if (num_MediaType > bd) {
3073 #endif
3074 val = MediaType[bd];
3075 atl2_validate_option(&val, &opt);
3076 adapter->hw.MediaType = (u16) val;
3077 #ifdef module_param_array
3078 } else
3079 adapter->hw.MediaType = (u16)(opt.def);
3080 #endif
3081 }
Linux with added FPC-III support