1 /******************************************************************************
3 * Copyright(c) 2009-2012 Realtek Corporation.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * The full GNU General Public License is included in this distribution in the
15 * file called LICENSE.
17 * Contact Information:
18 * wlanfae <wlanfae@realtek.com>
19 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
20 * Hsinchu 300, Taiwan.
22 * Larry Finger <Larry.Finger@lwfinger.net>
24 *****************************************************************************/
31 #include "pwrseqcmd.h"
33 #include "btcoexist/rtl_btc.h"
34 #include <linux/firmware.h>
35 #include <linux/export.h>
36 #include <net/cfg80211.h>
38 u8 channel5g
[CHANNEL_MAX_NUMBER_5G
] = {
39 36, 38, 40, 42, 44, 46, 48, /* Band 1 */
40 52, 54, 56, 58, 60, 62, 64, /* Band 2 */
41 100, 102, 104, 106, 108, 110, 112, /* Band 3 */
42 116, 118, 120, 122, 124, 126, 128, /* Band 3 */
43 132, 134, 136, 138, 140, 142, 144, /* Band 3 */
44 149, 151, 153, 155, 157, 159, 161, /* Band 4 */
45 165, 167, 169, 171, 173, 175, 177 /* Band 4 */
47 EXPORT_SYMBOL(channel5g
);
49 u8 channel5g_80m
[CHANNEL_MAX_NUMBER_5G_80M
] = {
50 42, 58, 106, 122, 138, 155, 171
52 EXPORT_SYMBOL(channel5g_80m
);
54 void rtl_addr_delay(u32 addr
)
58 else if (addr
== 0xfd)
60 else if (addr
== 0xfc)
62 else if (addr
== 0xfb)
63 usleep_range(50, 100);
64 else if (addr
== 0xfa)
66 else if (addr
== 0xf9)
69 EXPORT_SYMBOL(rtl_addr_delay
);
71 void rtl_rfreg_delay(struct ieee80211_hw
*hw
, enum radio_path rfpath
, u32 addr
,
74 if (addr
>= 0xf9 && addr
<= 0xfe) {
77 rtl_set_rfreg(hw
, rfpath
, addr
, mask
, data
);
81 EXPORT_SYMBOL(rtl_rfreg_delay
);
83 void rtl_bb_delay(struct ieee80211_hw
*hw
, u32 addr
, u32 data
)
85 if (addr
>= 0xf9 && addr
<= 0xfe) {
88 rtl_set_bbreg(hw
, addr
, MASKDWORD
, data
);
92 EXPORT_SYMBOL(rtl_bb_delay
);
94 static void rtl_fw_do_work(const struct firmware
*firmware
, void *context
,
97 struct ieee80211_hw
*hw
= context
;
98 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
101 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_LOUD
,
102 "Firmware callback routine entered!\n");
103 complete(&rtlpriv
->firmware_loading_complete
);
105 if (rtlpriv
->cfg
->alt_fw_name
) {
106 err
= request_firmware(&firmware
,
107 rtlpriv
->cfg
->alt_fw_name
,
109 pr_info("Loading alternative firmware %s\n",
110 rtlpriv
->cfg
->alt_fw_name
);
114 pr_err("Firmware %s not available\n", rtlpriv
->cfg
->fw_name
);
115 rtlpriv
->max_fw_size
= 0;
119 if (firmware
->size
> rtlpriv
->max_fw_size
) {
120 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
121 "Firmware is too big!\n");
122 release_firmware(firmware
);
126 memcpy(rtlpriv
->rtlhal
.pfirmware
, firmware
->data
,
128 rtlpriv
->rtlhal
.fwsize
= firmware
->size
;
130 memcpy(rtlpriv
->rtlhal
.wowlan_firmware
, firmware
->data
,
132 rtlpriv
->rtlhal
.wowlan_fwsize
= firmware
->size
;
134 rtlpriv
->rtlhal
.fwsize
= firmware
->size
;
135 release_firmware(firmware
);
138 void rtl_fw_cb(const struct firmware
*firmware
, void *context
)
140 rtl_fw_do_work(firmware
, context
, false);
142 EXPORT_SYMBOL(rtl_fw_cb
);
144 void rtl_wowlan_fw_cb(const struct firmware
*firmware
, void *context
)
146 rtl_fw_do_work(firmware
, context
, true);
148 EXPORT_SYMBOL(rtl_wowlan_fw_cb
);
150 /*mutex for start & stop is must here. */
151 static int rtl_op_start(struct ieee80211_hw
*hw
)
154 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
155 struct rtl_hal
*rtlhal
= rtl_hal(rtl_priv(hw
));
157 if (!is_hal_stop(rtlhal
))
159 if (!test_bit(RTL_STATUS_INTERFACE_START
, &rtlpriv
->status
))
161 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
162 err
= rtlpriv
->intf_ops
->adapter_start(hw
);
164 rtl_watch_dog_timer_callback((unsigned long)hw
);
165 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
169 static void rtl_op_stop(struct ieee80211_hw
*hw
)
171 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
172 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
173 struct rtl_hal
*rtlhal
= rtl_hal(rtl_priv(hw
));
174 struct rtl_ps_ctl
*ppsc
= rtl_psc(rtl_priv(hw
));
175 bool support_remote_wakeup
= false;
177 if (is_hal_stop(rtlhal
))
180 rtlpriv
->cfg
->ops
->get_hw_reg(hw
, HAL_DEF_WOWLAN
,
181 (u8
*)(&support_remote_wakeup
));
182 /* here is must, because adhoc do stop and start,
183 * but stop with RFOFF may cause something wrong,
186 if (unlikely(ppsc
->rfpwr_state
== ERFOFF
))
189 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
190 /* if wowlan supported, DON'T clear connected info */
191 if (!(support_remote_wakeup
&&
192 rtlhal
->enter_pnp_sleep
)) {
193 mac
->link_state
= MAC80211_NOLINK
;
194 eth_zero_addr(mac
->bssid
);
195 mac
->vendor
= PEER_UNKNOWN
;
198 rtl_cam_reset_sec_info(hw
);
200 rtl_deinit_deferred_work(hw
);
202 rtlpriv
->intf_ops
->adapter_stop(hw
);
204 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
207 static void rtl_op_tx(struct ieee80211_hw
*hw
,
208 struct ieee80211_tx_control
*control
,
211 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
212 struct rtl_hal
*rtlhal
= rtl_hal(rtl_priv(hw
));
213 struct rtl_ps_ctl
*ppsc
= rtl_psc(rtl_priv(hw
));
214 struct rtl_tcb_desc tcb_desc
;
215 memset(&tcb_desc
, 0, sizeof(struct rtl_tcb_desc
));
217 if (unlikely(is_hal_stop(rtlhal
) || ppsc
->rfpwr_state
!= ERFON
))
220 if (!test_bit(RTL_STATUS_INTERFACE_START
, &rtlpriv
->status
))
223 if (!rtlpriv
->intf_ops
->waitq_insert(hw
, control
->sta
, skb
))
224 rtlpriv
->intf_ops
->adapter_tx(hw
, control
->sta
, skb
, &tcb_desc
);
228 dev_kfree_skb_any(skb
);
231 static int rtl_op_add_interface(struct ieee80211_hw
*hw
,
232 struct ieee80211_vif
*vif
)
234 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
235 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
239 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_WARNING
,
240 "vif has been set!! mac->vif = 0x%p\n", mac
->vif
);
244 vif
->driver_flags
|= IEEE80211_VIF_BEACON_FILTER
;
248 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
249 switch (ieee80211_vif_type_p2p(vif
)) {
250 case NL80211_IFTYPE_P2P_CLIENT
:
251 mac
->p2p
= P2P_ROLE_CLIENT
;
253 case NL80211_IFTYPE_STATION
:
254 if (mac
->beacon_enabled
== 1) {
255 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
256 "NL80211_IFTYPE_STATION\n");
257 mac
->beacon_enabled
= 0;
258 rtlpriv
->cfg
->ops
->update_interrupt_mask(hw
, 0,
259 rtlpriv
->cfg
->maps
[RTL_IBSS_INT_MASKS
]);
262 case NL80211_IFTYPE_ADHOC
:
263 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
264 "NL80211_IFTYPE_ADHOC\n");
266 mac
->link_state
= MAC80211_LINKED
;
267 rtlpriv
->cfg
->ops
->set_bcn_reg(hw
);
268 if (rtlpriv
->rtlhal
.current_bandtype
== BAND_ON_2_4G
)
269 mac
->basic_rates
= 0xfff;
271 mac
->basic_rates
= 0xff0;
272 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BASIC_RATE
,
273 (u8
*)(&mac
->basic_rates
));
276 case NL80211_IFTYPE_P2P_GO
:
277 mac
->p2p
= P2P_ROLE_GO
;
279 case NL80211_IFTYPE_AP
:
280 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
281 "NL80211_IFTYPE_AP\n");
283 mac
->link_state
= MAC80211_LINKED
;
284 rtlpriv
->cfg
->ops
->set_bcn_reg(hw
);
285 if (rtlpriv
->rtlhal
.current_bandtype
== BAND_ON_2_4G
)
286 mac
->basic_rates
= 0xfff;
288 mac
->basic_rates
= 0xff0;
289 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BASIC_RATE
,
290 (u8
*)(&mac
->basic_rates
));
292 case NL80211_IFTYPE_MESH_POINT
:
293 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
294 "NL80211_IFTYPE_MESH_POINT\n");
296 mac
->link_state
= MAC80211_LINKED
;
297 rtlpriv
->cfg
->ops
->set_bcn_reg(hw
);
298 if (rtlpriv
->rtlhal
.current_bandtype
== BAND_ON_2_4G
)
299 mac
->basic_rates
= 0xfff;
301 mac
->basic_rates
= 0xff0;
302 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BASIC_RATE
,
303 (u8
*)(&mac
->basic_rates
));
306 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
307 "operation mode %d is not support!\n", vif
->type
);
313 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
314 "p2p role %x\n", vif
->type
);
315 mac
->basic_rates
= 0xff0;/*disable cck rate for p2p*/
316 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BASIC_RATE
,
317 (u8
*)(&mac
->basic_rates
));
320 mac
->opmode
= vif
->type
;
321 rtlpriv
->cfg
->ops
->set_network_type(hw
, vif
->type
);
322 memcpy(mac
->mac_addr
, vif
->addr
, ETH_ALEN
);
323 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_ETHER_ADDR
, mac
->mac_addr
);
326 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
330 static void rtl_op_remove_interface(struct ieee80211_hw
*hw
,
331 struct ieee80211_vif
*vif
)
333 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
334 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
336 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
338 /* Free beacon resources */
339 if ((vif
->type
== NL80211_IFTYPE_AP
) ||
340 (vif
->type
== NL80211_IFTYPE_ADHOC
) ||
341 (vif
->type
== NL80211_IFTYPE_MESH_POINT
)) {
342 if (mac
->beacon_enabled
== 1) {
343 mac
->beacon_enabled
= 0;
344 rtlpriv
->cfg
->ops
->update_interrupt_mask(hw
, 0,
345 rtlpriv
->cfg
->maps
[RTL_IBSS_INT_MASKS
]);
350 *Note: We assume NL80211_IFTYPE_UNSPECIFIED as
351 *NO LINK for our hardware.
355 mac
->link_state
= MAC80211_NOLINK
;
356 eth_zero_addr(mac
->bssid
);
357 mac
->vendor
= PEER_UNKNOWN
;
358 mac
->opmode
= NL80211_IFTYPE_UNSPECIFIED
;
359 rtlpriv
->cfg
->ops
->set_network_type(hw
, mac
->opmode
);
361 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
363 static int rtl_op_change_interface(struct ieee80211_hw
*hw
,
364 struct ieee80211_vif
*vif
,
365 enum nl80211_iftype new_type
, bool p2p
)
367 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
369 rtl_op_remove_interface(hw
, vif
);
371 vif
->type
= new_type
;
373 ret
= rtl_op_add_interface(hw
, vif
);
374 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
380 static u16
crc16_ccitt(u8 data
, u16 crc
)
382 u8 shift_in
, data_bit
, crc_bit11
, crc_bit4
, crc_bit15
;
386 for (i
= 0; i
< 8; i
++) {
387 crc_bit15
= ((crc
& BIT(15)) ? 1 : 0);
388 data_bit
= (data
& (BIT(0) << i
) ? 1 : 0);
389 shift_in
= crc_bit15
^ data_bit
;
397 crc_bit11
= ((crc
& BIT(11)) ? 1 : 0) ^ shift_in
;
399 result
&= (~BIT(12));
403 crc_bit4
= ((crc
& BIT(4)) ? 1 : 0) ^ shift_in
;
415 static u16
_calculate_wol_pattern_crc(u8
*pattern
, u16 len
)
420 for (i
= 0; i
< len
; i
++)
421 crc
= crc16_ccitt(pattern
[i
], crc
);
428 static void _rtl_add_wowlan_patterns(struct ieee80211_hw
*hw
,
429 struct cfg80211_wowlan
*wow
)
431 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
432 struct rtl_mac
*mac
= &rtlpriv
->mac80211
;
433 struct cfg80211_pkt_pattern
*patterns
= wow
->patterns
;
434 struct rtl_wow_pattern rtl_pattern
;
435 const u8
*pattern_os
, *mask_os
;
436 u8 mask
[MAX_WOL_BIT_MASK_SIZE
] = {0};
437 u8 content
[MAX_WOL_PATTERN_SIZE
] = {0};
438 u8 broadcast_addr
[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
439 u8 multicast_addr1
[2] = {0x33, 0x33};
440 u8 multicast_addr2
[3] = {0x01, 0x00, 0x5e};
444 for (i
= 0; i
< wow
->n_patterns
; i
++) {
445 memset(&rtl_pattern
, 0, sizeof(struct rtl_wow_pattern
));
446 memset(mask
, 0, MAX_WOL_BIT_MASK_SIZE
);
447 if (patterns
[i
].pattern_len
> MAX_WOL_PATTERN_SIZE
) {
448 RT_TRACE(rtlpriv
, COMP_POWER
, DBG_WARNING
,
449 "Pattern[%d] is too long\n", i
);
452 pattern_os
= patterns
[i
].pattern
;
453 mask_len
= DIV_ROUND_UP(patterns
[i
].pattern_len
, 8);
454 mask_os
= patterns
[i
].mask
;
455 RT_PRINT_DATA(rtlpriv
, COMP_POWER
, DBG_TRACE
,
456 "pattern content\n", pattern_os
,
457 patterns
[i
].pattern_len
);
458 RT_PRINT_DATA(rtlpriv
, COMP_POWER
, DBG_TRACE
,
459 "mask content\n", mask_os
, mask_len
);
460 /* 1. unicast? multicast? or broadcast? */
461 if (memcmp(pattern_os
, broadcast_addr
, 6) == 0)
462 rtl_pattern
.type
= BROADCAST_PATTERN
;
463 else if (memcmp(pattern_os
, multicast_addr1
, 2) == 0 ||
464 memcmp(pattern_os
, multicast_addr2
, 3) == 0)
465 rtl_pattern
.type
= MULTICAST_PATTERN
;
466 else if (memcmp(pattern_os
, mac
->mac_addr
, 6) == 0)
467 rtl_pattern
.type
= UNICAST_PATTERN
;
469 rtl_pattern
.type
= UNKNOWN_TYPE
;
471 /* 2. translate mask_from_os to mask_for_hw */
473 /******************************************************************************
474 * pattern from OS uses 'ethenet frame', like this:
476 | 6 | 6 | 2 | 20 | Variable | 4 |
477 |--------+--------+------+-----------+------------+-----|
478 | 802.3 Mac Header | IP Header | TCP Packet | FCS |
481 * BUT, packet catched by our HW is in '802.11 frame', begin from LLC,
483 | 24 or 30 | 6 | 2 | 20 | Variable | 4 |
484 |-------------------+--------+------+-----------+------------+-----|
485 | 802.11 MAC Header | LLC | IP Header | TCP Packet | FCS |
488 * Therefore, we need translate mask_from_OS to mask_to_hw.
489 * We should left-shift mask by 6 bits, then set the new bit[0~5] = 0,
490 * because new mask[0~5] means 'SA', but our HW packet begins from LLC,
491 * bit[0~5] corresponds to first 6 Bytes in LLC, they just don't match.
492 ******************************************************************************/
495 for (j
= 0; j
< mask_len
- 1; j
++) {
496 mask
[j
] = mask_os
[j
] >> 6;
497 mask
[j
] |= (mask_os
[j
+ 1] & 0x3F) << 2;
499 mask
[j
] = (mask_os
[j
] >> 6) & 0x3F;
500 /* Set bit 0-5 to zero */
503 RT_PRINT_DATA(rtlpriv
, COMP_POWER
, DBG_TRACE
,
504 "mask to hw\n", mask
, mask_len
);
505 for (j
= 0; j
< (MAX_WOL_BIT_MASK_SIZE
+ 1) / 4; j
++) {
506 rtl_pattern
.mask
[j
] = mask
[j
* 4];
507 rtl_pattern
.mask
[j
] |= (mask
[j
* 4 + 1] << 8);
508 rtl_pattern
.mask
[j
] |= (mask
[j
* 4 + 2] << 16);
509 rtl_pattern
.mask
[j
] |= (mask
[j
* 4 + 3] << 24);
512 /* To get the wake up pattern from the mask.
513 * We do not count first 12 bits which means
514 * DA[6] and SA[6] in the pattern to match HW design.
517 for (j
= 12; j
< patterns
[i
].pattern_len
; j
++) {
518 if ((mask_os
[j
/ 8] >> (j
% 8)) & 0x01) {
519 content
[len
] = pattern_os
[j
];
524 RT_PRINT_DATA(rtlpriv
, COMP_POWER
, DBG_TRACE
,
525 "pattern to hw\n", content
, len
);
526 /* 3. calculate crc */
527 rtl_pattern
.crc
= _calculate_wol_pattern_crc(content
, len
);
528 RT_TRACE(rtlpriv
, COMP_POWER
, DBG_TRACE
,
529 "CRC_Remainder = 0x%x", rtl_pattern
.crc
);
531 /* 4. write crc & mask_for_hw to hw */
532 rtlpriv
->cfg
->ops
->add_wowlan_pattern(hw
, &rtl_pattern
, i
);
534 rtl_write_byte(rtlpriv
, 0x698, wow
->n_patterns
);
537 static int rtl_op_suspend(struct ieee80211_hw
*hw
,
538 struct cfg80211_wowlan
*wow
)
540 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
541 struct rtl_hal
*rtlhal
= rtl_hal(rtlpriv
);
542 struct rtl_ps_ctl
*ppsc
= rtl_psc(rtl_priv(hw
));
545 RT_TRACE(rtlpriv
, COMP_POWER
, DBG_DMESG
, "\n");
549 /* to resolve s4 can not wake up*/
550 do_gettimeofday(&ts
);
551 rtlhal
->last_suspend_sec
= ts
.tv_sec
;
553 if ((ppsc
->wo_wlan_mode
& WAKE_ON_PATTERN_MATCH
) && wow
->n_patterns
)
554 _rtl_add_wowlan_patterns(hw
, wow
);
556 rtlhal
->driver_is_goingto_unload
= true;
557 rtlhal
->enter_pnp_sleep
= true;
561 device_set_wakeup_enable(wiphy_dev(hw
->wiphy
), true);
565 static int rtl_op_resume(struct ieee80211_hw
*hw
)
567 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
568 struct rtl_hal
*rtlhal
= rtl_hal(rtlpriv
);
569 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
572 RT_TRACE(rtlpriv
, COMP_POWER
, DBG_DMESG
, "\n");
573 rtlhal
->driver_is_goingto_unload
= false;
574 rtlhal
->enter_pnp_sleep
= false;
575 rtlhal
->wake_from_pnp_sleep
= true;
577 /* to resovle s4 can not wake up*/
578 do_gettimeofday(&ts
);
579 if (ts
.tv_sec
- rtlhal
->last_suspend_sec
< 5)
583 device_set_wakeup_enable(wiphy_dev(hw
->wiphy
), false);
584 ieee80211_resume_disconnect(mac
->vif
);
585 rtlhal
->wake_from_pnp_sleep
= false;
590 static int rtl_op_config(struct ieee80211_hw
*hw
, u32 changed
)
592 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
593 struct rtl_phy
*rtlphy
= &(rtlpriv
->phy
);
594 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
595 struct rtl_ps_ctl
*ppsc
= rtl_psc(rtl_priv(hw
));
596 struct ieee80211_conf
*conf
= &hw
->conf
;
601 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
602 if (changed
& IEEE80211_CONF_CHANGE_LISTEN_INTERVAL
) { /* BIT(2)*/
603 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
604 "IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n");
608 if (changed
& IEEE80211_CONF_CHANGE_IDLE
) {
609 if (hw
->conf
.flags
& IEEE80211_CONF_IDLE
)
615 *although rfoff may not cause by ips, but we will
616 *check the reason in set_rf_power_state function
618 if (unlikely(ppsc
->rfpwr_state
== ERFOFF
))
623 if (changed
& IEEE80211_CONF_CHANGE_PS
) {
624 cancel_delayed_work(&rtlpriv
->works
.ps_work
);
625 cancel_delayed_work(&rtlpriv
->works
.ps_rfon_wq
);
626 if (conf
->flags
& IEEE80211_CONF_PS
) {
627 rtlpriv
->psc
.sw_ps_enabled
= true;
628 /* sleep here is must, or we may recv the beacon and
629 * cause mac80211 into wrong ps state, this will cause
630 * power save nullfunc send fail, and further cause
631 * pkt loss, So sleep must quickly but not immediatly
632 * because that will cause nullfunc send by mac80211
633 * fail, and cause pkt loss, we have tested that 5mA
634 * is worked very well */
635 if (!rtlpriv
->psc
.multi_buffered
)
636 queue_delayed_work(rtlpriv
->works
.rtl_wq
,
637 &rtlpriv
->works
.ps_work
,
640 rtl_swlps_rf_awake(hw
);
641 rtlpriv
->psc
.sw_ps_enabled
= false;
645 if (changed
& IEEE80211_CONF_CHANGE_RETRY_LIMITS
) {
646 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
647 "IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n",
648 hw
->conf
.long_frame_max_tx_count
);
649 mac
->retry_long
= hw
->conf
.long_frame_max_tx_count
;
650 mac
->retry_short
= hw
->conf
.long_frame_max_tx_count
;
651 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_RETRY_LIMIT
,
652 (u8
*)(&hw
->conf
.long_frame_max_tx_count
));
655 if (changed
& IEEE80211_CONF_CHANGE_CHANNEL
&&
656 !rtlpriv
->proximity
.proxim_on
) {
657 struct ieee80211_channel
*channel
= hw
->conf
.chandef
.chan
;
658 enum nl80211_chan_width width
= hw
->conf
.chandef
.width
;
659 enum nl80211_channel_type channel_type
= NL80211_CHAN_NO_HT
;
660 u8 wide_chan
= (u8
) channel
->hw_value
;
662 /* channel_type is for 20&40M */
663 if (width
< NL80211_CHAN_WIDTH_80
)
665 cfg80211_get_chandef_type(&hw
->conf
.chandef
);
666 if (mac
->act_scanning
)
669 if (rtlpriv
->dm
.supp_phymode_switch
&&
670 mac
->link_state
< MAC80211_LINKED
&&
671 !mac
->act_scanning
) {
672 if (rtlpriv
->cfg
->ops
->chk_switch_dmdp
)
673 rtlpriv
->cfg
->ops
->chk_switch_dmdp(hw
);
677 *because we should back channel to
678 *current_network.chan in in scanning,
679 *So if set_chan == current_network.chan
681 *because mac80211 tell us wrong bw40
682 *info for cisco1253 bw20, so we modify
683 *it here based on UPPER & LOWER
686 if (width
>= NL80211_CHAN_WIDTH_80
) {
687 if (width
== NL80211_CHAN_WIDTH_80
) {
688 u32 center
= hw
->conf
.chandef
.center_freq1
;
690 (u32
)hw
->conf
.chandef
.chan
->center_freq
;
692 rtlphy
->current_chan_bw
=
696 if (center
> primary
) {
697 mac
->cur_80_prime_sc
=
698 PRIME_CHNL_OFFSET_LOWER
;
699 if (center
- primary
== 10) {
700 mac
->cur_40_prime_sc
=
701 PRIME_CHNL_OFFSET_UPPER
;
704 } else if (center
- primary
== 30) {
705 mac
->cur_40_prime_sc
=
706 PRIME_CHNL_OFFSET_LOWER
;
711 mac
->cur_80_prime_sc
=
712 PRIME_CHNL_OFFSET_UPPER
;
713 if (primary
- center
== 10) {
714 mac
->cur_40_prime_sc
=
715 PRIME_CHNL_OFFSET_LOWER
;
718 } else if (primary
- center
== 30) {
719 mac
->cur_40_prime_sc
=
720 PRIME_CHNL_OFFSET_UPPER
;
727 switch (channel_type
) {
728 case NL80211_CHAN_HT20
:
729 case NL80211_CHAN_NO_HT
:
731 mac
->cur_40_prime_sc
=
732 PRIME_CHNL_OFFSET_DONT_CARE
;
733 rtlphy
->current_chan_bw
=
738 case NL80211_CHAN_HT40MINUS
:
740 mac
->cur_40_prime_sc
=
741 PRIME_CHNL_OFFSET_UPPER
;
742 rtlphy
->current_chan_bw
=
743 HT_CHANNEL_WIDTH_20_40
;
751 case NL80211_CHAN_HT40PLUS
:
753 mac
->cur_40_prime_sc
=
754 PRIME_CHNL_OFFSET_LOWER
;
755 rtlphy
->current_chan_bw
=
756 HT_CHANNEL_WIDTH_20_40
;
767 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
768 "switch case not processed\n");
776 /* In scanning, when before we offchannel we may send a ps=1
777 * null to AP, and then we may send a ps = 0 null to AP quickly,
778 * but first null may have caused AP to put lots of packet to
779 * hw tx buffer. These packets must be tx'd before we go off
780 * channel so we must delay more time to let AP flush these
781 * packets before going offchannel, or dis-association or
782 * delete BA will be caused by AP
784 if (rtlpriv
->mac80211
.offchan_delay
) {
785 rtlpriv
->mac80211
.offchan_delay
= false;
789 rtlphy
->current_channel
= wide_chan
;
791 rtlpriv
->cfg
->ops
->switch_channel(hw
);
792 rtlpriv
->cfg
->ops
->set_channel_access(hw
);
793 rtlpriv
->cfg
->ops
->set_bw_mode(hw
, channel_type
);
796 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
801 static void rtl_op_configure_filter(struct ieee80211_hw
*hw
,
802 unsigned int changed_flags
,
803 unsigned int *new_flags
, u64 multicast
)
805 bool update_rcr
= false;
806 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
807 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
809 *new_flags
&= RTL_SUPPORTED_FILTERS
;
810 if (0 == changed_flags
)
813 /*TODO: we disable broadcase now, so enable here */
814 if (changed_flags
& FIF_ALLMULTI
) {
815 if (*new_flags
& FIF_ALLMULTI
) {
816 mac
->rx_conf
|= rtlpriv
->cfg
->maps
[MAC_RCR_AM
] |
817 rtlpriv
->cfg
->maps
[MAC_RCR_AB
];
818 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
819 "Enable receive multicast frame\n");
821 mac
->rx_conf
&= ~(rtlpriv
->cfg
->maps
[MAC_RCR_AM
] |
822 rtlpriv
->cfg
->maps
[MAC_RCR_AB
]);
823 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
824 "Disable receive multicast frame\n");
829 if (changed_flags
& FIF_FCSFAIL
) {
830 if (*new_flags
& FIF_FCSFAIL
) {
831 mac
->rx_conf
|= rtlpriv
->cfg
->maps
[MAC_RCR_ACRC32
];
832 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
833 "Enable receive FCS error frame\n");
835 mac
->rx_conf
&= ~rtlpriv
->cfg
->maps
[MAC_RCR_ACRC32
];
836 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
837 "Disable receive FCS error frame\n");
843 /* if ssid not set to hw don't check bssid
844 * here just used for linked scanning, & linked
845 * and nolink check bssid is set in set network_type
847 if ((changed_flags
& FIF_BCN_PRBRESP_PROMISC
) &&
848 (mac
->link_state
>= MAC80211_LINKED
)) {
849 if (mac
->opmode
!= NL80211_IFTYPE_AP
&&
850 mac
->opmode
!= NL80211_IFTYPE_MESH_POINT
) {
851 if (*new_flags
& FIF_BCN_PRBRESP_PROMISC
)
852 rtlpriv
->cfg
->ops
->set_chk_bssid(hw
, false);
854 rtlpriv
->cfg
->ops
->set_chk_bssid(hw
, true);
860 if (changed_flags
& FIF_CONTROL
) {
861 if (*new_flags
& FIF_CONTROL
) {
862 mac
->rx_conf
|= rtlpriv
->cfg
->maps
[MAC_RCR_ACF
];
864 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
865 "Enable receive control frame.\n");
867 mac
->rx_conf
&= ~rtlpriv
->cfg
->maps
[MAC_RCR_ACF
];
868 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
869 "Disable receive control frame.\n");
875 if (changed_flags
& FIF_OTHER_BSS
) {
876 if (*new_flags
& FIF_OTHER_BSS
) {
877 mac
->rx_conf
|= rtlpriv
->cfg
->maps
[MAC_RCR_AAP
];
878 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
879 "Enable receive other BSS's frame.\n");
881 mac
->rx_conf
&= ~rtlpriv
->cfg
->maps
[MAC_RCR_AAP
];
882 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
883 "Disable receive other BSS's frame.\n");
890 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_RCR
,
891 (u8
*)(&mac
->rx_conf
));
893 static int rtl_op_sta_add(struct ieee80211_hw
*hw
,
894 struct ieee80211_vif
*vif
,
895 struct ieee80211_sta
*sta
)
897 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
898 struct rtl_hal
*rtlhal
= rtl_hal(rtl_priv(hw
));
899 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
900 struct rtl_sta_info
*sta_entry
;
903 sta_entry
= (struct rtl_sta_info
*)sta
->drv_priv
;
904 spin_lock_bh(&rtlpriv
->locks
.entry_list_lock
);
905 list_add_tail(&sta_entry
->list
, &rtlpriv
->entry_list
);
906 spin_unlock_bh(&rtlpriv
->locks
.entry_list_lock
);
907 if (rtlhal
->current_bandtype
== BAND_ON_2_4G
) {
908 sta_entry
->wireless_mode
= WIRELESS_MODE_G
;
909 if (sta
->supp_rates
[0] <= 0xf)
910 sta_entry
->wireless_mode
= WIRELESS_MODE_B
;
911 if (sta
->ht_cap
.ht_supported
)
912 sta_entry
->wireless_mode
= WIRELESS_MODE_N_24G
;
914 if (vif
->type
== NL80211_IFTYPE_ADHOC
)
915 sta_entry
->wireless_mode
= WIRELESS_MODE_G
;
916 } else if (rtlhal
->current_bandtype
== BAND_ON_5G
) {
917 sta_entry
->wireless_mode
= WIRELESS_MODE_A
;
918 if (sta
->ht_cap
.ht_supported
)
919 sta_entry
->wireless_mode
= WIRELESS_MODE_N_5G
;
920 if (sta
->vht_cap
.vht_supported
)
921 sta_entry
->wireless_mode
= WIRELESS_MODE_AC_5G
;
923 if (vif
->type
== NL80211_IFTYPE_ADHOC
)
924 sta_entry
->wireless_mode
= WIRELESS_MODE_A
;
926 /*disable cck rate for p2p*/
928 sta
->supp_rates
[0] &= 0xfffffff0;
930 memcpy(sta_entry
->mac_addr
, sta
->addr
, ETH_ALEN
);
931 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
932 "Add sta addr is %pM\n", sta
->addr
);
933 rtlpriv
->cfg
->ops
->update_rate_tbl(hw
, sta
, 0);
939 static int rtl_op_sta_remove(struct ieee80211_hw
*hw
,
940 struct ieee80211_vif
*vif
,
941 struct ieee80211_sta
*sta
)
943 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
944 struct rtl_sta_info
*sta_entry
;
946 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
947 "Remove sta addr is %pM\n", sta
->addr
);
948 sta_entry
= (struct rtl_sta_info
*)sta
->drv_priv
;
949 sta_entry
->wireless_mode
= 0;
950 sta_entry
->ratr_index
= 0;
951 spin_lock_bh(&rtlpriv
->locks
.entry_list_lock
);
952 list_del(&sta_entry
->list
);
953 spin_unlock_bh(&rtlpriv
->locks
.entry_list_lock
);
957 static int _rtl_get_hal_qnum(u16 queue
)
982 *for mac80211 VO = 0, VI = 1, BE = 2, BK = 3
983 *for rtl819x BE = 0, BK = 1, VI = 2, VO = 3
985 static int rtl_op_conf_tx(struct ieee80211_hw
*hw
,
986 struct ieee80211_vif
*vif
, u16 queue
,
987 const struct ieee80211_tx_queue_params
*param
)
989 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
990 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
993 if (queue
>= AC_MAX
) {
994 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_WARNING
,
995 "queue number %d is incorrect!\n", queue
);
999 aci
= _rtl_get_hal_qnum(queue
);
1000 mac
->ac
[aci
].aifs
= param
->aifs
;
1001 mac
->ac
[aci
].cw_min
= cpu_to_le16(param
->cw_min
);
1002 mac
->ac
[aci
].cw_max
= cpu_to_le16(param
->cw_max
);
1003 mac
->ac
[aci
].tx_op
= cpu_to_le16(param
->txop
);
1004 memcpy(&mac
->edca_param
[aci
], param
, sizeof(*param
));
1005 rtlpriv
->cfg
->ops
->set_qos(hw
, aci
);
1009 static void send_beacon_frame(struct ieee80211_hw
*hw
,
1010 struct ieee80211_vif
*vif
)
1012 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1013 struct sk_buff
*skb
= ieee80211_beacon_get(hw
, vif
);
1014 struct rtl_tcb_desc tcb_desc
;
1017 memset(&tcb_desc
, 0, sizeof(struct rtl_tcb_desc
));
1018 rtlpriv
->intf_ops
->adapter_tx(hw
, NULL
, skb
, &tcb_desc
);
1022 static void rtl_op_bss_info_changed(struct ieee80211_hw
*hw
,
1023 struct ieee80211_vif
*vif
,
1024 struct ieee80211_bss_conf
*bss_conf
,
1027 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1028 struct rtl_hal
*rtlhal
= rtl_hal(rtlpriv
);
1029 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
1030 struct rtl_ps_ctl
*ppsc
= rtl_psc(rtl_priv(hw
));
1032 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
1033 if ((vif
->type
== NL80211_IFTYPE_ADHOC
) ||
1034 (vif
->type
== NL80211_IFTYPE_AP
) ||
1035 (vif
->type
== NL80211_IFTYPE_MESH_POINT
)) {
1036 if ((changed
& BSS_CHANGED_BEACON
) ||
1037 (changed
& BSS_CHANGED_BEACON_ENABLED
&&
1038 bss_conf
->enable_beacon
)) {
1039 if (mac
->beacon_enabled
== 0) {
1040 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
1041 "BSS_CHANGED_BEACON_ENABLED\n");
1043 /*start hw beacon interrupt. */
1044 /*rtlpriv->cfg->ops->set_bcn_reg(hw); */
1045 mac
->beacon_enabled
= 1;
1046 rtlpriv
->cfg
->ops
->update_interrupt_mask(hw
,
1048 [RTL_IBSS_INT_MASKS
], 0);
1050 if (rtlpriv
->cfg
->ops
->linked_set_reg
)
1051 rtlpriv
->cfg
->ops
->linked_set_reg(hw
);
1052 send_beacon_frame(hw
, vif
);
1055 if ((changed
& BSS_CHANGED_BEACON_ENABLED
&&
1056 !bss_conf
->enable_beacon
)) {
1057 if (mac
->beacon_enabled
== 1) {
1058 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
1059 "ADHOC DISABLE BEACON\n");
1061 mac
->beacon_enabled
= 0;
1062 rtlpriv
->cfg
->ops
->update_interrupt_mask(hw
, 0,
1064 [RTL_IBSS_INT_MASKS
]);
1067 if (changed
& BSS_CHANGED_BEACON_INT
) {
1068 RT_TRACE(rtlpriv
, COMP_BEACON
, DBG_TRACE
,
1069 "BSS_CHANGED_BEACON_INT\n");
1070 mac
->beacon_interval
= bss_conf
->beacon_int
;
1071 rtlpriv
->cfg
->ops
->set_bcn_intv(hw
);
1075 /*TODO: reference to enum ieee80211_bss_change */
1076 if (changed
& BSS_CHANGED_ASSOC
) {
1078 if (bss_conf
->assoc
) {
1079 struct ieee80211_sta
*sta
= NULL
;
1082 mstatus
= RT_MEDIA_CONNECT
;
1083 /* we should reset all sec info & cam
1084 * before set cam after linked, we should not
1085 * reset in disassoc, that will cause tkip->wep
1086 * fail because some flag will be wrong */
1087 /* reset sec info */
1088 rtl_cam_reset_sec_info(hw
);
1089 /* reset cam to fix wep fail issue
1090 * when change from wpa to wep */
1091 rtl_cam_reset_all_entry(hw
);
1093 mac
->link_state
= MAC80211_LINKED
;
1094 mac
->cnt_after_linked
= 0;
1095 mac
->assoc_id
= bss_conf
->aid
;
1096 memcpy(mac
->bssid
, bss_conf
->bssid
, ETH_ALEN
);
1098 if (rtlpriv
->cfg
->ops
->linked_set_reg
)
1099 rtlpriv
->cfg
->ops
->linked_set_reg(hw
);
1102 sta
= ieee80211_find_sta(vif
, (u8
*)bss_conf
->bssid
);
1107 RT_TRACE(rtlpriv
, COMP_EASY_CONCURRENT
, DBG_LOUD
,
1108 "send PS STATIC frame\n");
1109 if (rtlpriv
->dm
.supp_phymode_switch
) {
1110 if (sta
->ht_cap
.ht_supported
)
1111 rtl_send_smps_action(hw
, sta
,
1112 IEEE80211_SMPS_STATIC
);
1115 if (rtlhal
->current_bandtype
== BAND_ON_5G
) {
1116 mac
->mode
= WIRELESS_MODE_A
;
1118 if (sta
->supp_rates
[0] <= 0xf)
1119 mac
->mode
= WIRELESS_MODE_B
;
1121 mac
->mode
= WIRELESS_MODE_G
;
1124 if (sta
->ht_cap
.ht_supported
) {
1125 if (rtlhal
->current_bandtype
== BAND_ON_2_4G
)
1126 mac
->mode
= WIRELESS_MODE_N_24G
;
1128 mac
->mode
= WIRELESS_MODE_N_5G
;
1131 if (sta
->vht_cap
.vht_supported
) {
1132 if (rtlhal
->current_bandtype
== BAND_ON_5G
)
1133 mac
->mode
= WIRELESS_MODE_AC_5G
;
1135 mac
->mode
= WIRELESS_MODE_AC_24G
;
1138 if (vif
->type
== NL80211_IFTYPE_STATION
&& sta
)
1139 rtlpriv
->cfg
->ops
->update_rate_tbl(hw
, sta
, 0);
1142 /* to avoid AP Disassociation caused by inactivity */
1143 rtlpriv
->cfg
->ops
->set_hw_reg(hw
,
1145 (u8
*)(&keep_alive
));
1147 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
1148 "BSS_CHANGED_ASSOC\n");
1150 mstatus
= RT_MEDIA_DISCONNECT
;
1152 if (mac
->link_state
== MAC80211_LINKED
) {
1153 rtlpriv
->enter_ps
= false;
1154 schedule_work(&rtlpriv
->works
.lps_change_work
);
1156 if (ppsc
->p2p_ps_info
.p2p_ps_mode
> P2P_PS_NONE
)
1157 rtl_p2p_ps_cmd(hw
, P2P_PS_DISABLE
);
1158 mac
->link_state
= MAC80211_NOLINK
;
1159 eth_zero_addr(mac
->bssid
);
1160 mac
->vendor
= PEER_UNKNOWN
;
1163 if (rtlpriv
->dm
.supp_phymode_switch
) {
1164 if (rtlpriv
->cfg
->ops
->chk_switch_dmdp
)
1165 rtlpriv
->cfg
->ops
->chk_switch_dmdp(hw
);
1167 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
1168 "BSS_CHANGED_UN_ASSOC\n");
1170 rtlpriv
->cfg
->ops
->set_network_type(hw
, vif
->type
);
1172 * To tell firmware we have connected or disconnected
1174 rtlpriv
->cfg
->ops
->set_hw_reg(hw
,
1175 HW_VAR_H2C_FW_JOINBSSRPT
,
1177 ppsc
->report_linked
= (mstatus
== RT_MEDIA_CONNECT
) ?
1180 if (rtlpriv
->cfg
->ops
->get_btc_status())
1181 rtlpriv
->btcoexist
.btc_ops
->btc_mediastatus_notify(
1185 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1186 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1187 "BSS_CHANGED_ERP_CTS_PROT\n");
1188 mac
->use_cts_protect
= bss_conf
->use_cts_prot
;
1191 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1192 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
,
1193 "BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n",
1194 bss_conf
->use_short_preamble
);
1196 mac
->short_preamble
= bss_conf
->use_short_preamble
;
1197 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_ACK_PREAMBLE
,
1198 (u8
*)(&mac
->short_preamble
));
1201 if (changed
& BSS_CHANGED_ERP_SLOT
) {
1202 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1203 "BSS_CHANGED_ERP_SLOT\n");
1205 if (bss_conf
->use_short_slot
)
1206 mac
->slot_time
= RTL_SLOT_TIME_9
;
1208 mac
->slot_time
= RTL_SLOT_TIME_20
;
1210 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_SLOT_TIME
,
1211 (u8
*)(&mac
->slot_time
));
1214 if (changed
& BSS_CHANGED_HT
) {
1215 struct ieee80211_sta
*sta
= NULL
;
1217 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1218 "BSS_CHANGED_HT\n");
1221 sta
= ieee80211_find_sta(vif
, (u8
*)bss_conf
->bssid
);
1223 if (sta
->ht_cap
.ampdu_density
>
1224 mac
->current_ampdu_density
)
1225 mac
->current_ampdu_density
=
1226 sta
->ht_cap
.ampdu_density
;
1227 if (sta
->ht_cap
.ampdu_factor
<
1228 mac
->current_ampdu_factor
)
1229 mac
->current_ampdu_factor
=
1230 sta
->ht_cap
.ampdu_factor
;
1234 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_SHORTGI_DENSITY
,
1235 (u8
*)(&mac
->max_mss_density
));
1236 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_AMPDU_FACTOR
,
1237 &mac
->current_ampdu_factor
);
1238 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_AMPDU_MIN_SPACE
,
1239 &mac
->current_ampdu_density
);
1242 if (changed
& BSS_CHANGED_BSSID
) {
1244 struct ieee80211_sta
*sta
= NULL
;
1246 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BSSID
,
1247 (u8
*)bss_conf
->bssid
);
1249 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_DMESG
,
1250 "bssid: %pM\n", bss_conf
->bssid
);
1252 mac
->vendor
= PEER_UNKNOWN
;
1253 memcpy(mac
->bssid
, bss_conf
->bssid
, ETH_ALEN
);
1256 sta
= ieee80211_find_sta(vif
, (u8
*)bss_conf
->bssid
);
1262 if (rtlhal
->current_bandtype
== BAND_ON_5G
) {
1263 mac
->mode
= WIRELESS_MODE_A
;
1265 if (sta
->supp_rates
[0] <= 0xf)
1266 mac
->mode
= WIRELESS_MODE_B
;
1268 mac
->mode
= WIRELESS_MODE_G
;
1271 if (sta
->ht_cap
.ht_supported
) {
1272 if (rtlhal
->current_bandtype
== BAND_ON_2_4G
)
1273 mac
->mode
= WIRELESS_MODE_N_24G
;
1275 mac
->mode
= WIRELESS_MODE_N_5G
;
1278 if (sta
->vht_cap
.vht_supported
) {
1279 if (rtlhal
->current_bandtype
== BAND_ON_5G
)
1280 mac
->mode
= WIRELESS_MODE_AC_5G
;
1282 mac
->mode
= WIRELESS_MODE_AC_24G
;
1285 /* just station need it, because ibss & ap mode will
1286 * set in sta_add, and will be NULL here */
1287 if (vif
->type
== NL80211_IFTYPE_STATION
) {
1288 struct rtl_sta_info
*sta_entry
;
1289 sta_entry
= (struct rtl_sta_info
*)sta
->drv_priv
;
1290 sta_entry
->wireless_mode
= mac
->mode
;
1293 if (sta
->ht_cap
.ht_supported
) {
1294 mac
->ht_enable
= true;
1297 * for cisco 1252 bw20 it's wrong
1298 * if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
1299 * mac->bw_40 = true;
1304 if (sta
->vht_cap
.vht_supported
)
1305 mac
->vht_enable
= true;
1307 if (changed
& BSS_CHANGED_BASIC_RATES
) {
1308 /* for 5G must << RATE_6M_INDEX = 4,
1309 * because 5G have no cck rate*/
1310 if (rtlhal
->current_bandtype
== BAND_ON_5G
)
1311 basic_rates
= sta
->supp_rates
[1] << 4;
1313 basic_rates
= sta
->supp_rates
[0];
1315 mac
->basic_rates
= basic_rates
;
1316 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_BASIC_RATE
,
1317 (u8
*)(&basic_rates
));
1322 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
1325 static u64
rtl_op_get_tsf(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
)
1327 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1330 rtlpriv
->cfg
->ops
->get_hw_reg(hw
, HW_VAR_CORRECT_TSF
, (u8
*)(&tsf
));
1334 static void rtl_op_set_tsf(struct ieee80211_hw
*hw
,
1335 struct ieee80211_vif
*vif
, u64 tsf
)
1337 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1338 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
1339 u8 bibss
= (mac
->opmode
== NL80211_IFTYPE_ADHOC
) ? 1 : 0;
1342 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_CORRECT_TSF
, (u8
*)(&bibss
));
1345 static void rtl_op_reset_tsf(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
)
1347 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1350 rtlpriv
->cfg
->ops
->set_hw_reg(hw
, HW_VAR_DUAL_TSF_RST
, (u8
*)(&tmp
));
1353 static void rtl_op_sta_notify(struct ieee80211_hw
*hw
,
1354 struct ieee80211_vif
*vif
,
1355 enum sta_notify_cmd cmd
,
1356 struct ieee80211_sta
*sta
)
1359 case STA_NOTIFY_SLEEP
:
1361 case STA_NOTIFY_AWAKE
:
1368 static int rtl_op_ampdu_action(struct ieee80211_hw
*hw
,
1369 struct ieee80211_vif
*vif
,
1370 struct ieee80211_ampdu_params
*params
)
1372 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1373 struct ieee80211_sta
*sta
= params
->sta
;
1374 enum ieee80211_ampdu_mlme_action action
= params
->action
;
1375 u16 tid
= params
->tid
;
1376 u16
*ssn
= ¶ms
->ssn
;
1379 case IEEE80211_AMPDU_TX_START
:
1380 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1381 "IEEE80211_AMPDU_TX_START: TID:%d\n", tid
);
1382 return rtl_tx_agg_start(hw
, vif
, sta
, tid
, ssn
);
1383 case IEEE80211_AMPDU_TX_STOP_CONT
:
1384 case IEEE80211_AMPDU_TX_STOP_FLUSH
:
1385 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT
:
1386 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1387 "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid
);
1388 return rtl_tx_agg_stop(hw
, vif
, sta
, tid
);
1389 case IEEE80211_AMPDU_TX_OPERATIONAL
:
1390 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1391 "IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid
);
1392 rtl_tx_agg_oper(hw
, sta
, tid
);
1394 case IEEE80211_AMPDU_RX_START
:
1395 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1396 "IEEE80211_AMPDU_RX_START:TID:%d\n", tid
);
1397 return rtl_rx_agg_start(hw
, sta
, tid
);
1398 case IEEE80211_AMPDU_RX_STOP
:
1399 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_TRACE
,
1400 "IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid
);
1401 return rtl_rx_agg_stop(hw
, sta
, tid
);
1403 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
1404 "IEEE80211_AMPDU_ERR!!!!:\n");
1410 static void rtl_op_sw_scan_start(struct ieee80211_hw
*hw
,
1411 struct ieee80211_vif
*vif
,
1414 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1415 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
1417 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
, "\n");
1418 mac
->act_scanning
= true;
1419 if (rtlpriv
->link_info
.higher_busytraffic
) {
1420 mac
->skip_scan
= true;
1424 if (rtlpriv
->cfg
->ops
->get_btc_status())
1425 rtlpriv
->btcoexist
.btc_ops
->btc_scan_notify(rtlpriv
, 1);
1427 if (rtlpriv
->dm
.supp_phymode_switch
) {
1428 if (rtlpriv
->cfg
->ops
->chk_switch_dmdp
)
1429 rtlpriv
->cfg
->ops
->chk_switch_dmdp(hw
);
1432 if (mac
->link_state
== MAC80211_LINKED
) {
1433 rtlpriv
->enter_ps
= false;
1434 schedule_work(&rtlpriv
->works
.lps_change_work
);
1435 mac
->link_state
= MAC80211_LINKED_SCANNING
;
1441 rtlpriv
->rtlhal
.load_imrandiqk_setting_for2g
= false;
1443 rtlpriv
->cfg
->ops
->led_control(hw
, LED_CTL_SITE_SURVEY
);
1444 rtlpriv
->cfg
->ops
->scan_operation_backup(hw
, SCAN_OPT_BACKUP_BAND0
);
1447 static void rtl_op_sw_scan_complete(struct ieee80211_hw
*hw
,
1448 struct ieee80211_vif
*vif
)
1450 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1451 struct rtl_mac
*mac
= rtl_mac(rtl_priv(hw
));
1453 RT_TRACE(rtlpriv
, COMP_MAC80211
, DBG_LOUD
, "\n");
1454 mac
->act_scanning
= false;
1455 mac
->skip_scan
= false;
1456 if (rtlpriv
->link_info
.higher_busytraffic
)
1459 /* p2p will use 1/6/11 to scan */
1460 if (mac
->n_channels
== 3)
1461 mac
->p2p_in_use
= true;
1463 mac
->p2p_in_use
= false;
1464 mac
->n_channels
= 0;
1466 rtlpriv
->rtlhal
.load_imrandiqk_setting_for2g
= false;
1468 if (mac
->link_state
== MAC80211_LINKED_SCANNING
) {
1469 mac
->link_state
= MAC80211_LINKED
;
1470 if (mac
->opmode
== NL80211_IFTYPE_STATION
) {
1471 /* fix fwlps issue */
1472 rtlpriv
->cfg
->ops
->set_network_type(hw
, mac
->opmode
);
1476 rtlpriv
->cfg
->ops
->scan_operation_backup(hw
, SCAN_OPT_RESTORE
);
1477 if (rtlpriv
->cfg
->ops
->get_btc_status())
1478 rtlpriv
->btcoexist
.btc_ops
->btc_scan_notify(rtlpriv
, 0);
1481 static int rtl_op_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
1482 struct ieee80211_vif
*vif
, struct ieee80211_sta
*sta
,
1483 struct ieee80211_key_conf
*key
)
1485 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1486 u8 key_type
= NO_ENCRYPTION
;
1488 bool group_key
= false;
1489 bool wep_only
= false;
1491 u8 mac_addr
[ETH_ALEN
];
1492 u8 bcast_addr
[ETH_ALEN
] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
1494 if (rtlpriv
->cfg
->mod_params
->sw_crypto
|| rtlpriv
->sec
.use_sw_sec
) {
1495 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_WARNING
,
1496 "not open hw encryption\n");
1497 return -ENOSPC
; /*User disabled HW-crypto */
1499 /* To support IBSS, use sw-crypto for GTK */
1500 if (((vif
->type
== NL80211_IFTYPE_ADHOC
) ||
1501 (vif
->type
== NL80211_IFTYPE_MESH_POINT
)) &&
1502 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
))
1504 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1505 "%s hardware based encryption for keyidx: %d, mac: %pM\n",
1506 cmd
== SET_KEY
? "Using" : "Disabling", key
->keyidx
,
1507 sta
? sta
->addr
: bcast_addr
);
1508 rtlpriv
->sec
.being_setkey
= true;
1510 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
1511 /* <1> get encryption alg */
1513 switch (key
->cipher
) {
1514 case WLAN_CIPHER_SUITE_WEP40
:
1515 key_type
= WEP40_ENCRYPTION
;
1516 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
, "alg:WEP40\n");
1518 case WLAN_CIPHER_SUITE_WEP104
:
1519 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
, "alg:WEP104\n");
1520 key_type
= WEP104_ENCRYPTION
;
1522 case WLAN_CIPHER_SUITE_TKIP
:
1523 key_type
= TKIP_ENCRYPTION
;
1524 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
, "alg:TKIP\n");
1526 case WLAN_CIPHER_SUITE_CCMP
:
1527 key_type
= AESCCMP_ENCRYPTION
;
1528 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
, "alg:CCMP\n");
1530 case WLAN_CIPHER_SUITE_AES_CMAC
:
1531 /* HW don't support CMAC encryption,
1532 * use software CMAC encryption
1534 key_type
= AESCMAC_ENCRYPTION
;
1535 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
, "alg:CMAC\n");
1536 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1537 "HW don't support CMAC encrypiton, use software CMAC encrypiton\n");
1541 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
1542 "alg_err:%x!!!!:\n", key
->cipher
);
1545 if (key_type
== WEP40_ENCRYPTION
||
1546 key_type
== WEP104_ENCRYPTION
||
1547 vif
->type
== NL80211_IFTYPE_ADHOC
)
1548 rtlpriv
->sec
.use_defaultkey
= true;
1550 /* <2> get key_idx */
1551 key_idx
= (u8
) (key
->keyidx
);
1554 /* <3> if pairwise key enable_hw_sec */
1555 group_key
= !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
);
1557 /* wep always be group key, but there are two conditions:
1558 * 1) wep only: is just for wep enc, in this condition
1559 * rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION
1560 * will be true & enable_hw_sec will be set when wep
1562 * 2) wep(group) + AES(pairwise): some AP like cisco
1563 * may use it, in this condition enable_hw_sec will not
1564 * be set when wep key setting */
1565 /* we must reset sec_info after lingked before set key,
1566 * or some flag will be wrong*/
1567 if (vif
->type
== NL80211_IFTYPE_AP
||
1568 vif
->type
== NL80211_IFTYPE_MESH_POINT
) {
1569 if (!group_key
|| key_type
== WEP40_ENCRYPTION
||
1570 key_type
== WEP104_ENCRYPTION
) {
1573 rtlpriv
->cfg
->ops
->enable_hw_sec(hw
);
1576 if ((!group_key
) || (vif
->type
== NL80211_IFTYPE_ADHOC
) ||
1577 rtlpriv
->sec
.pairwise_enc_algorithm
== NO_ENCRYPTION
) {
1578 if (rtlpriv
->sec
.pairwise_enc_algorithm
==
1580 (key_type
== WEP40_ENCRYPTION
||
1581 key_type
== WEP104_ENCRYPTION
))
1583 rtlpriv
->sec
.pairwise_enc_algorithm
= key_type
;
1584 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1585 "set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)\n",
1587 rtlpriv
->cfg
->ops
->enable_hw_sec(hw
);
1590 /* <4> set key based on cmd */
1594 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1595 "set WEP(group/pairwise) key\n");
1596 /* Pairwise key with an assigned MAC address. */
1597 rtlpriv
->sec
.pairwise_enc_algorithm
= key_type
;
1598 rtlpriv
->sec
.group_enc_algorithm
= key_type
;
1599 /*set local buf about wep key. */
1600 memcpy(rtlpriv
->sec
.key_buf
[key_idx
],
1601 key
->key
, key
->keylen
);
1602 rtlpriv
->sec
.key_len
[key_idx
] = key
->keylen
;
1603 eth_zero_addr(mac_addr
);
1604 } else if (group_key
) { /* group key */
1605 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1608 rtlpriv
->sec
.group_enc_algorithm
= key_type
;
1609 /*set local buf about group key. */
1610 memcpy(rtlpriv
->sec
.key_buf
[key_idx
],
1611 key
->key
, key
->keylen
);
1612 rtlpriv
->sec
.key_len
[key_idx
] = key
->keylen
;
1613 memcpy(mac_addr
, bcast_addr
, ETH_ALEN
);
1614 } else { /* pairwise key */
1615 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1616 "set pairwise key\n");
1619 "pairwise key without mac_addr\n");
1624 /* Pairwise key with an assigned MAC address. */
1625 rtlpriv
->sec
.pairwise_enc_algorithm
= key_type
;
1626 /*set local buf about pairwise key. */
1627 memcpy(rtlpriv
->sec
.key_buf
[PAIRWISE_KEYIDX
],
1628 key
->key
, key
->keylen
);
1629 rtlpriv
->sec
.key_len
[PAIRWISE_KEYIDX
] = key
->keylen
;
1630 rtlpriv
->sec
.pairwise_key
=
1631 rtlpriv
->sec
.key_buf
[PAIRWISE_KEYIDX
];
1632 memcpy(mac_addr
, sta
->addr
, ETH_ALEN
);
1634 rtlpriv
->cfg
->ops
->set_key(hw
, key_idx
, mac_addr
,
1635 group_key
, key_type
, wep_only
,
1637 /* <5> tell mac80211 do something: */
1638 /*must use sw generate IV, or can not work !!!!. */
1639 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
1640 key
->hw_key_idx
= key_idx
;
1641 if (key_type
== TKIP_ENCRYPTION
)
1642 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_MMIC
;
1643 /*use software CCMP encryption for management frames (MFP) */
1644 if (key_type
== AESCCMP_ENCRYPTION
)
1645 key
->flags
|= IEEE80211_KEY_FLAG_SW_MGMT_TX
;
1648 RT_TRACE(rtlpriv
, COMP_SEC
, DBG_DMESG
,
1649 "disable key delete one entry\n");
1650 /*set local buf about wep key. */
1651 if (vif
->type
== NL80211_IFTYPE_AP
||
1652 vif
->type
== NL80211_IFTYPE_MESH_POINT
) {
1654 rtl_cam_del_entry(hw
, sta
->addr
);
1656 memset(rtlpriv
->sec
.key_buf
[key_idx
], 0, key
->keylen
);
1657 rtlpriv
->sec
.key_len
[key_idx
] = 0;
1658 eth_zero_addr(mac_addr
);
1660 *mac80211 will delete entrys one by one,
1661 *so don't use rtl_cam_reset_all_entry
1662 *or clear all entry here.
1664 rtl_cam_delete_one_entry(hw
, mac_addr
, key_idx
);
1667 RT_TRACE(rtlpriv
, COMP_ERR
, DBG_EMERG
,
1668 "cmd_err:%x!!!!:\n", cmd
);
1671 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
1672 rtlpriv
->sec
.being_setkey
= false;
1676 static void rtl_op_rfkill_poll(struct ieee80211_hw
*hw
)
1678 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1684 if (!test_bit(RTL_STATUS_INTERFACE_START
, &rtlpriv
->status
))
1687 mutex_lock(&rtlpriv
->locks
.conf_mutex
);
1689 /*if Radio On return true here */
1690 radio_state
= rtlpriv
->cfg
->ops
->radio_onoff_checking(hw
, &valid
);
1693 if (unlikely(radio_state
!= rtlpriv
->rfkill
.rfkill_state
)) {
1694 rtlpriv
->rfkill
.rfkill_state
= radio_state
;
1696 RT_TRACE(rtlpriv
, COMP_RF
, DBG_DMESG
,
1697 "wireless radio switch turned %s\n",
1698 radio_state
? "on" : "off");
1700 blocked
= (rtlpriv
->rfkill
.rfkill_state
== 1) ? 0 : 1;
1701 wiphy_rfkill_set_hw_state(hw
->wiphy
, blocked
);
1705 mutex_unlock(&rtlpriv
->locks
.conf_mutex
);
1708 /* this function is called by mac80211 to flush tx buffer
1709 * before switch channle or power save, or tx buffer packet
1710 * maybe send after offchannel or rf sleep, this may cause
1711 * dis-association by AP */
1712 static void rtl_op_flush(struct ieee80211_hw
*hw
,
1713 struct ieee80211_vif
*vif
,
1717 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1719 if (rtlpriv
->intf_ops
->flush
)
1720 rtlpriv
->intf_ops
->flush(hw
, queues
, drop
);
1724 * This routine deals with the Power Configuration CMD
1725 * parsing for RTL8723/RTL8188E Series IC.
1727 * We should follow specific format that was released from HW SD.
1729 bool rtl_hal_pwrseqcmdparsing(struct rtl_priv
*rtlpriv
, u8 cut_version
,
1730 u8 faversion
, u8 interface_type
,
1731 struct wlan_pwr_cfg pwrcfgcmd
[])
1733 struct wlan_pwr_cfg cfg_cmd
= {0};
1734 bool polling_bit
= false;
1738 u32 polling_count
= 0;
1739 u32 max_polling_cnt
= 5000;
1742 cfg_cmd
= pwrcfgcmd
[ary_idx
];
1743 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1744 "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n",
1745 GET_PWR_CFG_OFFSET(cfg_cmd
),
1746 GET_PWR_CFG_CUT_MASK(cfg_cmd
),
1747 GET_PWR_CFG_FAB_MASK(cfg_cmd
),
1748 GET_PWR_CFG_INTF_MASK(cfg_cmd
),
1749 GET_PWR_CFG_BASE(cfg_cmd
), GET_PWR_CFG_CMD(cfg_cmd
),
1750 GET_PWR_CFG_MASK(cfg_cmd
), GET_PWR_CFG_VALUE(cfg_cmd
));
1752 if ((GET_PWR_CFG_FAB_MASK(cfg_cmd
)&faversion
) &&
1753 (GET_PWR_CFG_CUT_MASK(cfg_cmd
)&cut_version
) &&
1754 (GET_PWR_CFG_INTF_MASK(cfg_cmd
)&interface_type
)) {
1755 switch (GET_PWR_CFG_CMD(cfg_cmd
)) {
1757 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1758 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
1761 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1762 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
1763 offset
= GET_PWR_CFG_OFFSET(cfg_cmd
);
1765 /*Read the value from system register*/
1766 value
= rtl_read_byte(rtlpriv
, offset
);
1767 value
&= (~(GET_PWR_CFG_MASK(cfg_cmd
)));
1768 value
|= (GET_PWR_CFG_VALUE(cfg_cmd
) &
1769 GET_PWR_CFG_MASK(cfg_cmd
));
1771 /*Write the value back to sytem register*/
1772 rtl_write_byte(rtlpriv
, offset
, value
);
1774 case PWR_CMD_POLLING
:
1775 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1776 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
1777 polling_bit
= false;
1778 offset
= GET_PWR_CFG_OFFSET(cfg_cmd
);
1781 value
= rtl_read_byte(rtlpriv
, offset
);
1783 value
&= GET_PWR_CFG_MASK(cfg_cmd
);
1785 (GET_PWR_CFG_VALUE(cfg_cmd
) &
1786 GET_PWR_CFG_MASK(cfg_cmd
)))
1791 if (polling_count
++ > max_polling_cnt
)
1793 } while (!polling_bit
);
1796 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1797 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
1798 if (GET_PWR_CFG_VALUE(cfg_cmd
) ==
1800 udelay(GET_PWR_CFG_OFFSET(cfg_cmd
));
1802 mdelay(GET_PWR_CFG_OFFSET(cfg_cmd
));
1805 RT_TRACE(rtlpriv
, COMP_INIT
, DBG_TRACE
,
1806 "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
1810 "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
1819 EXPORT_SYMBOL(rtl_hal_pwrseqcmdparsing
);
1821 bool rtl_cmd_send_packet(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
1823 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1824 struct rtl_pci
*rtlpci
= rtl_pcidev(rtl_pcipriv(hw
));
1825 struct rtl8192_tx_ring
*ring
;
1826 struct rtl_tx_desc
*pdesc
;
1827 unsigned long flags
;
1828 struct sk_buff
*pskb
= NULL
;
1830 ring
= &rtlpci
->tx_ring
[BEACON_QUEUE
];
1832 spin_lock_irqsave(&rtlpriv
->locks
.irq_th_lock
, flags
);
1833 pskb
= __skb_dequeue(&ring
->queue
);
1836 /*this is wrong, fill_tx_cmddesc needs update*/
1837 pdesc
= &ring
->desc
[0];
1839 rtlpriv
->cfg
->ops
->fill_tx_cmddesc(hw
, (u8
*)pdesc
, 1, 1, skb
);
1841 __skb_queue_tail(&ring
->queue
, skb
);
1843 spin_unlock_irqrestore(&rtlpriv
->locks
.irq_th_lock
, flags
);
1845 rtlpriv
->cfg
->ops
->tx_polling(hw
, BEACON_QUEUE
);
1849 EXPORT_SYMBOL(rtl_cmd_send_packet
);
1850 const struct ieee80211_ops rtl_ops
= {
1851 .start
= rtl_op_start
,
1852 .stop
= rtl_op_stop
,
1854 .add_interface
= rtl_op_add_interface
,
1855 .remove_interface
= rtl_op_remove_interface
,
1856 .change_interface
= rtl_op_change_interface
,
1858 .suspend
= rtl_op_suspend
,
1859 .resume
= rtl_op_resume
,
1861 .config
= rtl_op_config
,
1862 .configure_filter
= rtl_op_configure_filter
,
1863 .set_key
= rtl_op_set_key
,
1864 .conf_tx
= rtl_op_conf_tx
,
1865 .bss_info_changed
= rtl_op_bss_info_changed
,
1866 .get_tsf
= rtl_op_get_tsf
,
1867 .set_tsf
= rtl_op_set_tsf
,
1868 .reset_tsf
= rtl_op_reset_tsf
,
1869 .sta_notify
= rtl_op_sta_notify
,
1870 .ampdu_action
= rtl_op_ampdu_action
,
1871 .sw_scan_start
= rtl_op_sw_scan_start
,
1872 .sw_scan_complete
= rtl_op_sw_scan_complete
,
1873 .rfkill_poll
= rtl_op_rfkill_poll
,
1874 .sta_add
= rtl_op_sta_add
,
1875 .sta_remove
= rtl_op_sta_remove
,
1876 .flush
= rtl_op_flush
,
1878 EXPORT_SYMBOL_GPL(rtl_ops
);
1880 bool rtl_btc_status_false(void)
1884 EXPORT_SYMBOL_GPL(rtl_btc_status_false
);
1886 void rtl_dm_diginit(struct ieee80211_hw
*hw
, u32 cur_igvalue
)
1888 struct rtl_priv
*rtlpriv
= rtl_priv(hw
);
1889 struct dig_t
*dm_digtable
= &rtlpriv
->dm_digtable
;
1891 dm_digtable
->dig_enable_flag
= true;
1892 dm_digtable
->dig_ext_port_stage
= DIG_EXT_PORT_STAGE_MAX
;
1893 dm_digtable
->cur_igvalue
= cur_igvalue
;
1894 dm_digtable
->pre_igvalue
= 0;
1895 dm_digtable
->cur_sta_cstate
= DIG_STA_DISCONNECT
;
1896 dm_digtable
->presta_cstate
= DIG_STA_DISCONNECT
;
1897 dm_digtable
->curmultista_cstate
= DIG_MULTISTA_DISCONNECT
;
1898 dm_digtable
->rssi_lowthresh
= DM_DIG_THRESH_LOW
;
1899 dm_digtable
->rssi_highthresh
= DM_DIG_THRESH_HIGH
;
1900 dm_digtable
->fa_lowthresh
= DM_FALSEALARM_THRESH_LOW
;
1901 dm_digtable
->fa_highthresh
= DM_FALSEALARM_THRESH_HIGH
;
1902 dm_digtable
->rx_gain_max
= DM_DIG_MAX
;
1903 dm_digtable
->rx_gain_min
= DM_DIG_MIN
;
1904 dm_digtable
->back_val
= DM_DIG_BACKOFF_DEFAULT
;
1905 dm_digtable
->back_range_max
= DM_DIG_BACKOFF_MAX
;
1906 dm_digtable
->back_range_min
= DM_DIG_BACKOFF_MIN
;
1907 dm_digtable
->pre_cck_cca_thres
= 0xff;
1908 dm_digtable
->cur_cck_cca_thres
= 0x83;
1909 dm_digtable
->forbidden_igi
= DM_DIG_MIN
;
1910 dm_digtable
->large_fa_hit
= 0;
1911 dm_digtable
->recover_cnt
= 0;
1912 dm_digtable
->dig_min_0
= 0x25;
1913 dm_digtable
->dig_min_1
= 0x25;
1914 dm_digtable
->media_connect_0
= false;
1915 dm_digtable
->media_connect_1
= false;
1916 rtlpriv
->dm
.dm_initialgain_enable
= true;
1917 dm_digtable
->bt30_cur_igi
= 0x32;
1918 dm_digtable
->pre_cck_pd_state
= CCK_PD_STAGE_MAX
;
1919 dm_digtable
->cur_cck_pd_state
= CCK_PD_STAGE_LOWRSSI
;
1921 EXPORT_SYMBOL(rtl_dm_diginit
);