2 * This file is part of wl1251
4 * Copyright (C) 2008-2009 Nokia Corporation
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 #include <linux/module.h>
23 #include <linux/interrupt.h>
24 #include <linux/firmware.h>
25 #include <linux/delay.h>
26 #include <linux/irq.h>
27 #include <linux/crc32.h>
28 #include <linux/etherdevice.h>
29 #include <linux/vmalloc.h>
30 #include <linux/slab.h>
31 #include <linux/netdevice.h>
34 #include "wl12xx_80211.h"
46 void wl1251_enable_interrupts(struct wl1251
*wl
)
48 wl
->if_ops
->enable_irq(wl
);
51 void wl1251_disable_interrupts(struct wl1251
*wl
)
53 wl
->if_ops
->disable_irq(wl
);
56 static int wl1251_power_off(struct wl1251
*wl
)
58 return wl
->if_ops
->power(wl
, false);
61 static int wl1251_power_on(struct wl1251
*wl
)
63 return wl
->if_ops
->power(wl
, true);
66 static int wl1251_fetch_firmware(struct wl1251
*wl
)
68 const struct firmware
*fw
;
69 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
72 ret
= request_firmware(&fw
, WL1251_FW_NAME
, dev
);
75 wl1251_error("could not get firmware: %d", ret
);
80 wl1251_error("firmware size is not multiple of 32 bits: %zu",
86 wl
->fw_len
= fw
->size
;
87 wl
->fw
= vmalloc(wl
->fw_len
);
90 wl1251_error("could not allocate memory for the firmware");
95 memcpy(wl
->fw
, fw
->data
, wl
->fw_len
);
100 release_firmware(fw
);
105 static int wl1251_fetch_nvs(struct wl1251
*wl
)
107 const struct firmware
*fw
;
108 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
111 ret
= request_firmware(&fw
, WL1251_NVS_NAME
, dev
);
114 wl1251_error("could not get nvs file: %d", ret
);
119 wl1251_error("nvs size is not multiple of 32 bits: %zu",
125 wl
->nvs_len
= fw
->size
;
126 wl
->nvs
= kmemdup(fw
->data
, wl
->nvs_len
, GFP_KERNEL
);
129 wl1251_error("could not allocate memory for the nvs file");
137 release_firmware(fw
);
142 static void wl1251_fw_wakeup(struct wl1251
*wl
)
146 elp_reg
= ELPCTRL_WAKE_UP
;
147 wl1251_write_elp(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
, elp_reg
);
148 elp_reg
= wl1251_read_elp(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
);
150 if (!(elp_reg
& ELPCTRL_WLAN_READY
))
151 wl1251_warning("WLAN not ready");
154 static int wl1251_chip_wakeup(struct wl1251
*wl
)
158 ret
= wl1251_power_on(wl
);
162 msleep(WL1251_POWER_ON_SLEEP
);
163 wl
->if_ops
->reset(wl
);
165 /* We don't need a real memory partition here, because we only want
166 * to use the registers at this point. */
167 wl1251_set_partition(wl
,
171 REGISTERS_DOWN_SIZE
);
173 /* ELP module wake up */
174 wl1251_fw_wakeup(wl
);
176 /* whal_FwCtrl_BootSm() */
178 /* 0. read chip id from CHIP_ID */
179 wl
->chip_id
= wl1251_reg_read32(wl
, CHIP_ID_B
);
181 /* 1. check if chip id is valid */
183 switch (wl
->chip_id
) {
184 case CHIP_ID_1251_PG12
:
185 wl1251_debug(DEBUG_BOOT
, "chip id 0x%x (1251 PG12)",
188 case CHIP_ID_1251_PG11
:
189 wl1251_debug(DEBUG_BOOT
, "chip id 0x%x (1251 PG11)",
192 case CHIP_ID_1251_PG10
:
194 wl1251_error("unsupported chip id: 0x%x", wl
->chip_id
);
199 if (wl
->fw
== NULL
) {
200 ret
= wl1251_fetch_firmware(wl
);
205 if (wl
->nvs
== NULL
&& !wl
->use_eeprom
) {
206 /* No NVS from netlink, try to get it from the filesystem */
207 ret
= wl1251_fetch_nvs(wl
);
216 #define WL1251_IRQ_LOOP_COUNT 10
217 static void wl1251_irq_work(struct work_struct
*work
)
219 u32 intr
, ctr
= WL1251_IRQ_LOOP_COUNT
;
221 container_of(work
, struct wl1251
, irq_work
);
224 mutex_lock(&wl
->mutex
);
226 wl1251_debug(DEBUG_IRQ
, "IRQ work");
228 if (wl
->state
== WL1251_STATE_OFF
)
231 ret
= wl1251_ps_elp_wakeup(wl
);
235 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, WL1251_ACX_INTR_ALL
);
237 intr
= wl1251_reg_read32(wl
, ACX_REG_INTERRUPT_CLEAR
);
238 wl1251_debug(DEBUG_IRQ
, "intr: 0x%x", intr
);
242 wl
->rx_counter
= wl1251_mem_read32(
243 wl
, wl
->data_path
->rx_control_addr
);
245 /* We handle a frmware bug here */
246 switch ((wl
->rx_counter
- wl
->rx_handled
) & 0xf) {
248 wl1251_debug(DEBUG_IRQ
,
249 "RX: FW and host in sync");
250 intr
&= ~WL1251_ACX_INTR_RX0_DATA
;
251 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
254 wl1251_debug(DEBUG_IRQ
, "RX: FW +1");
255 intr
|= WL1251_ACX_INTR_RX0_DATA
;
256 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
259 wl1251_debug(DEBUG_IRQ
, "RX: FW +2");
260 intr
|= WL1251_ACX_INTR_RX0_DATA
;
261 intr
|= WL1251_ACX_INTR_RX1_DATA
;
265 "RX: FW and host out of sync: %d",
266 wl
->rx_counter
- wl
->rx_handled
);
270 wl
->rx_handled
= wl
->rx_counter
;
272 wl1251_debug(DEBUG_IRQ
, "RX counter: %d",
276 intr
&= wl
->intr_mask
;
279 wl1251_debug(DEBUG_IRQ
, "INTR is 0");
283 if (intr
& WL1251_ACX_INTR_RX0_DATA
) {
284 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX0_DATA");
288 if (intr
& WL1251_ACX_INTR_RX1_DATA
) {
289 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX1_DATA");
293 if (intr
& WL1251_ACX_INTR_TX_RESULT
) {
294 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_TX_RESULT");
295 wl1251_tx_complete(wl
);
298 if (intr
& WL1251_ACX_INTR_EVENT_A
) {
299 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_EVENT_A");
300 wl1251_event_handle(wl
, 0);
303 if (intr
& WL1251_ACX_INTR_EVENT_B
) {
304 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_EVENT_B");
305 wl1251_event_handle(wl
, 1);
308 if (intr
& WL1251_ACX_INTR_INIT_COMPLETE
)
309 wl1251_debug(DEBUG_IRQ
,
310 "WL1251_ACX_INTR_INIT_COMPLETE");
315 intr
= wl1251_reg_read32(wl
, ACX_REG_INTERRUPT_CLEAR
);
319 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, ~(wl
->intr_mask
));
320 wl1251_ps_elp_sleep(wl
);
323 mutex_unlock(&wl
->mutex
);
326 static int wl1251_join(struct wl1251
*wl
, u8 bss_type
, u8 channel
,
327 u16 beacon_interval
, u8 dtim_period
)
331 ret
= wl1251_acx_frame_rates(wl
, DEFAULT_HW_GEN_TX_RATE
,
332 DEFAULT_HW_GEN_MODULATION_TYPE
,
333 wl
->tx_mgmt_frm_rate
,
334 wl
->tx_mgmt_frm_mod
);
339 * Join command applies filters, and if we are not associated,
340 * BSSID filter must be disabled for association to work.
342 if (is_zero_ether_addr(wl
->bssid
))
343 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
345 ret
= wl1251_cmd_join(wl
, bss_type
, channel
, beacon_interval
,
350 ret
= wl1251_event_wait(wl
, JOIN_EVENT_COMPLETE_ID
, 100);
352 wl1251_warning("join timeout");
358 static void wl1251_op_tx(struct ieee80211_hw
*hw
,
359 struct ieee80211_tx_control
*control
,
362 struct wl1251
*wl
= hw
->priv
;
365 skb_queue_tail(&wl
->tx_queue
, skb
);
368 * The chip specific setup must run before the first TX packet -
369 * before that, the tx_work will not be initialized!
372 ieee80211_queue_work(wl
->hw
, &wl
->tx_work
);
375 * The workqueue is slow to process the tx_queue and we need stop
376 * the queue here, otherwise the queue will get too long.
378 if (skb_queue_len(&wl
->tx_queue
) >= WL1251_TX_QUEUE_HIGH_WATERMARK
) {
379 wl1251_debug(DEBUG_TX
, "op_tx: tx_queue full, stop queues");
381 spin_lock_irqsave(&wl
->wl_lock
, flags
);
382 ieee80211_stop_queues(wl
->hw
);
383 wl
->tx_queue_stopped
= true;
384 spin_unlock_irqrestore(&wl
->wl_lock
, flags
);
388 static int wl1251_op_start(struct ieee80211_hw
*hw
)
390 struct wl1251
*wl
= hw
->priv
;
391 struct wiphy
*wiphy
= hw
->wiphy
;
394 wl1251_debug(DEBUG_MAC80211
, "mac80211 start");
396 mutex_lock(&wl
->mutex
);
398 if (wl
->state
!= WL1251_STATE_OFF
) {
399 wl1251_error("cannot start because not in off state: %d",
405 ret
= wl1251_chip_wakeup(wl
);
409 ret
= wl1251_boot(wl
);
413 ret
= wl1251_hw_init(wl
);
417 ret
= wl1251_acx_station_id(wl
);
421 wl
->state
= WL1251_STATE_ON
;
423 wl1251_info("firmware booted (%s)", wl
->fw_ver
);
425 /* update hw/fw version info in wiphy struct */
426 wiphy
->hw_version
= wl
->chip_id
;
427 strncpy(wiphy
->fw_version
, wl
->fw_ver
, sizeof(wiphy
->fw_version
));
431 wl1251_power_off(wl
);
433 mutex_unlock(&wl
->mutex
);
438 static void wl1251_op_stop(struct ieee80211_hw
*hw
)
440 struct wl1251
*wl
= hw
->priv
;
444 wl1251_debug(DEBUG_MAC80211
, "mac80211 stop");
446 mutex_lock(&wl
->mutex
);
448 WARN_ON(wl
->state
!= WL1251_STATE_ON
);
451 ieee80211_scan_completed(wl
->hw
, true);
452 wl
->scanning
= false;
455 wl
->state
= WL1251_STATE_OFF
;
457 wl1251_disable_interrupts(wl
);
459 mutex_unlock(&wl
->mutex
);
461 cancel_work_sync(&wl
->irq_work
);
462 cancel_work_sync(&wl
->tx_work
);
463 cancel_delayed_work_sync(&wl
->elp_work
);
465 mutex_lock(&wl
->mutex
);
467 /* let's notify MAC80211 about the remaining pending TX frames */
469 wl1251_power_off(wl
);
471 eth_zero_addr(wl
->bssid
);
473 wl
->bss_type
= MAX_BSS_TYPE
;
475 wl
->data_in_count
= 0;
478 wl
->rx_current_buffer
= 0;
480 wl
->next_tx_complete
= 0;
482 wl
->station_mode
= STATION_ACTIVE_MODE
;
483 wl
->psm_entry_retry
= 0;
484 wl
->tx_queue_stopped
= false;
485 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
487 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
488 wl
->monitor_present
= false;
491 wl1251_debugfs_reset(wl
);
493 mutex_unlock(&wl
->mutex
);
496 static int wl1251_op_add_interface(struct ieee80211_hw
*hw
,
497 struct ieee80211_vif
*vif
)
499 struct wl1251
*wl
= hw
->priv
;
502 vif
->driver_flags
|= IEEE80211_VIF_BEACON_FILTER
|
503 IEEE80211_VIF_SUPPORTS_UAPSD
|
504 IEEE80211_VIF_SUPPORTS_CQM_RSSI
;
506 wl1251_debug(DEBUG_MAC80211
, "mac80211 add interface type %d mac %pM",
507 vif
->type
, vif
->addr
);
509 mutex_lock(&wl
->mutex
);
518 case NL80211_IFTYPE_STATION
:
519 wl
->bss_type
= BSS_TYPE_STA_BSS
;
521 case NL80211_IFTYPE_ADHOC
:
522 wl
->bss_type
= BSS_TYPE_IBSS
;
529 if (!ether_addr_equal_unaligned(wl
->mac_addr
, vif
->addr
)) {
530 memcpy(wl
->mac_addr
, vif
->addr
, ETH_ALEN
);
531 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
532 ret
= wl1251_acx_station_id(wl
);
538 mutex_unlock(&wl
->mutex
);
542 static void wl1251_op_remove_interface(struct ieee80211_hw
*hw
,
543 struct ieee80211_vif
*vif
)
545 struct wl1251
*wl
= hw
->priv
;
547 mutex_lock(&wl
->mutex
);
548 wl1251_debug(DEBUG_MAC80211
, "mac80211 remove interface");
550 eth_zero_addr(wl
->bssid
);
551 mutex_unlock(&wl
->mutex
);
554 static int wl1251_build_null_data(struct wl1251
*wl
)
556 struct sk_buff
*skb
= NULL
;
561 if (wl
->bss_type
== BSS_TYPE_IBSS
) {
562 size
= sizeof(struct wl12xx_null_data_template
);
565 skb
= ieee80211_nullfunc_get(wl
->hw
, wl
->vif
);
572 ret
= wl1251_cmd_template_set(wl
, CMD_NULL_DATA
, ptr
, size
);
577 wl1251_warning("cmd buld null data failed: %d", ret
);
582 static int wl1251_build_qos_null_data(struct wl1251
*wl
)
584 struct ieee80211_qos_hdr
template;
586 memset(&template, 0, sizeof(template));
588 memcpy(template.addr1
, wl
->bssid
, ETH_ALEN
);
589 memcpy(template.addr2
, wl
->mac_addr
, ETH_ALEN
);
590 memcpy(template.addr3
, wl
->bssid
, ETH_ALEN
);
592 template.frame_control
= cpu_to_le16(IEEE80211_FTYPE_DATA
|
593 IEEE80211_STYPE_QOS_NULLFUNC
|
594 IEEE80211_FCTL_TODS
);
596 /* FIXME: not sure what priority to use here */
597 template.qos_ctrl
= cpu_to_le16(0);
599 return wl1251_cmd_template_set(wl
, CMD_QOS_NULL_DATA
, &template,
603 static bool wl1251_can_do_pm(struct ieee80211_conf
*conf
, struct wl1251
*wl
)
605 return (conf
->flags
& IEEE80211_CONF_PS
) && !wl
->monitor_present
;
608 static int wl1251_op_config(struct ieee80211_hw
*hw
, u32 changed
)
610 struct wl1251
*wl
= hw
->priv
;
611 struct ieee80211_conf
*conf
= &hw
->conf
;
612 int channel
, ret
= 0;
614 channel
= ieee80211_frequency_to_channel(
615 conf
->chandef
.chan
->center_freq
);
617 wl1251_debug(DEBUG_MAC80211
,
618 "mac80211 config ch %d monitor %s psm %s power %d",
620 conf
->flags
& IEEE80211_CONF_MONITOR
? "on" : "off",
621 conf
->flags
& IEEE80211_CONF_PS
? "on" : "off",
624 mutex_lock(&wl
->mutex
);
626 ret
= wl1251_ps_elp_wakeup(wl
);
630 if (changed
& IEEE80211_CONF_CHANGE_MONITOR
) {
633 if (conf
->flags
& IEEE80211_CONF_MONITOR
) {
634 wl
->monitor_present
= true;
635 mode
= DF_SNIFF_MODE_ENABLE
| DF_ENCRYPTION_DISABLE
;
637 wl
->monitor_present
= false;
641 ret
= wl1251_acx_feature_cfg(wl
, mode
);
646 if (channel
!= wl
->channel
) {
647 wl
->channel
= channel
;
650 * Use ENABLE_RX command for channel switching when no
651 * interface is present (monitor mode only).
652 * This leaves the tx path disabled in firmware, whereas
653 * the usual JOIN command seems to transmit some frames
656 if (wl
->vif
== NULL
) {
658 ret
= wl1251_cmd_data_path_rx(wl
, wl
->channel
, 1);
660 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
661 wl
->beacon_int
, wl
->dtim_period
);
667 if (wl1251_can_do_pm(conf
, wl
) && !wl
->psm_requested
) {
668 wl1251_debug(DEBUG_PSM
, "psm enabled");
670 wl
->psm_requested
= true;
672 wl
->dtim_period
= conf
->ps_dtim_period
;
674 ret
= wl1251_acx_wr_tbtt_and_dtim(wl
, wl
->beacon_int
,
678 * mac80211 enables PSM only if we're already associated.
680 ret
= wl1251_ps_set_mode(wl
, STATION_POWER_SAVE_MODE
);
683 } else if (!wl1251_can_do_pm(conf
, wl
) && wl
->psm_requested
) {
684 wl1251_debug(DEBUG_PSM
, "psm disabled");
686 wl
->psm_requested
= false;
688 if (wl
->station_mode
!= STATION_ACTIVE_MODE
) {
689 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
695 if (changed
& IEEE80211_CONF_CHANGE_IDLE
&& !wl
->scanning
) {
696 if (conf
->flags
& IEEE80211_CONF_IDLE
) {
697 ret
= wl1251_ps_set_mode(wl
, STATION_IDLE
);
701 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
704 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
705 wl
->beacon_int
, wl
->dtim_period
);
711 if (conf
->power_level
!= wl
->power_level
) {
712 ret
= wl1251_acx_tx_power(wl
, conf
->power_level
);
716 wl
->power_level
= conf
->power_level
;
720 wl1251_ps_elp_sleep(wl
);
723 mutex_unlock(&wl
->mutex
);
728 struct wl1251_filter_params
{
731 u8 mc_list
[ACX_MC_ADDRESS_GROUP_MAX
][ETH_ALEN
];
734 static u64
wl1251_op_prepare_multicast(struct ieee80211_hw
*hw
,
735 struct netdev_hw_addr_list
*mc_list
)
737 struct wl1251_filter_params
*fp
;
738 struct netdev_hw_addr
*ha
;
739 struct wl1251
*wl
= hw
->priv
;
741 if (unlikely(wl
->state
== WL1251_STATE_OFF
))
744 fp
= kzalloc(sizeof(*fp
), GFP_ATOMIC
);
746 wl1251_error("Out of memory setting filters.");
750 /* update multicast filtering parameters */
751 fp
->mc_list_length
= 0;
752 if (netdev_hw_addr_list_count(mc_list
) > ACX_MC_ADDRESS_GROUP_MAX
) {
756 netdev_hw_addr_list_for_each(ha
, mc_list
) {
757 memcpy(fp
->mc_list
[fp
->mc_list_length
],
759 fp
->mc_list_length
++;
763 return (u64
)(unsigned long)fp
;
766 #define WL1251_SUPPORTED_FILTERS (FIF_ALLMULTI | \
768 FIF_BCN_PRBRESP_PROMISC | \
773 static void wl1251_op_configure_filter(struct ieee80211_hw
*hw
,
774 unsigned int changed
,
775 unsigned int *total
, u64 multicast
)
777 struct wl1251_filter_params
*fp
= (void *)(unsigned long)multicast
;
778 struct wl1251
*wl
= hw
->priv
;
781 wl1251_debug(DEBUG_MAC80211
, "mac80211 configure filter");
783 *total
&= WL1251_SUPPORTED_FILTERS
;
784 changed
&= WL1251_SUPPORTED_FILTERS
;
787 /* no filters which we support changed */
792 mutex_lock(&wl
->mutex
);
794 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
795 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
797 if (*total
& FIF_ALLMULTI
)
799 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
800 * all multicast frames
802 wl
->rx_config
&= ~CFG_MC_FILTER_EN
;
803 if (*total
& FIF_FCSFAIL
)
804 wl
->rx_filter
|= CFG_RX_FCS_ERROR
;
805 if (*total
& FIF_BCN_PRBRESP_PROMISC
) {
806 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
807 wl
->rx_config
&= ~CFG_SSID_FILTER_EN
;
809 if (*total
& FIF_CONTROL
)
810 wl
->rx_filter
|= CFG_RX_CTL_EN
;
811 if (*total
& FIF_OTHER_BSS
|| is_zero_ether_addr(wl
->bssid
))
812 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
813 if (*total
& FIF_PROBE_REQ
)
814 wl
->rx_filter
|= CFG_RX_PREQ_EN
;
816 if (wl
->state
== WL1251_STATE_OFF
)
819 ret
= wl1251_ps_elp_wakeup(wl
);
823 if (*total
& FIF_ALLMULTI
)
824 ret
= wl1251_acx_group_address_tbl(wl
, false, NULL
, 0);
826 ret
= wl1251_acx_group_address_tbl(wl
, fp
->enabled
,
832 /* send filters to firmware */
833 wl1251_acx_rx_config(wl
, wl
->rx_config
, wl
->rx_filter
);
835 wl1251_ps_elp_sleep(wl
);
838 mutex_unlock(&wl
->mutex
);
843 static int wl1251_set_key_type(struct wl1251
*wl
,
844 struct wl1251_cmd_set_keys
*key
,
845 enum set_key_cmd cmd
,
846 struct ieee80211_key_conf
*mac80211_key
,
849 switch (mac80211_key
->cipher
) {
850 case WLAN_CIPHER_SUITE_WEP40
:
851 case WLAN_CIPHER_SUITE_WEP104
:
852 if (is_broadcast_ether_addr(addr
))
853 key
->key_type
= KEY_WEP_DEFAULT
;
855 key
->key_type
= KEY_WEP_ADDR
;
857 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
859 case WLAN_CIPHER_SUITE_TKIP
:
860 if (is_broadcast_ether_addr(addr
))
861 key
->key_type
= KEY_TKIP_MIC_GROUP
;
863 key
->key_type
= KEY_TKIP_MIC_PAIRWISE
;
865 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
867 case WLAN_CIPHER_SUITE_CCMP
:
868 if (is_broadcast_ether_addr(addr
))
869 key
->key_type
= KEY_AES_GROUP
;
871 key
->key_type
= KEY_AES_PAIRWISE
;
872 mac80211_key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
875 wl1251_error("Unknown key cipher 0x%x", mac80211_key
->cipher
);
882 static int wl1251_op_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
883 struct ieee80211_vif
*vif
,
884 struct ieee80211_sta
*sta
,
885 struct ieee80211_key_conf
*key
)
887 struct wl1251
*wl
= hw
->priv
;
888 struct wl1251_cmd_set_keys
*wl_cmd
;
892 static const u8 bcast_addr
[ETH_ALEN
] =
893 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
895 wl1251_debug(DEBUG_MAC80211
, "mac80211 set key");
897 wl_cmd
= kzalloc(sizeof(*wl_cmd
), GFP_KERNEL
);
903 addr
= sta
? sta
->addr
: bcast_addr
;
905 wl1251_debug(DEBUG_CRYPT
, "CMD: 0x%x", cmd
);
906 wl1251_dump(DEBUG_CRYPT
, "ADDR: ", addr
, ETH_ALEN
);
907 wl1251_debug(DEBUG_CRYPT
, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
908 key
->cipher
, key
->keyidx
, key
->keylen
, key
->flags
);
909 wl1251_dump(DEBUG_CRYPT
, "KEY: ", key
->key
, key
->keylen
);
911 if (is_zero_ether_addr(addr
)) {
912 /* We dont support TX only encryption */
917 mutex_lock(&wl
->mutex
);
921 if (wl
->monitor_present
) {
925 wl_cmd
->key_action
= KEY_ADD_OR_REPLACE
;
928 wl_cmd
->key_action
= KEY_REMOVE
;
931 wl1251_error("Unsupported key cmd 0x%x", cmd
);
935 ret
= wl1251_ps_elp_wakeup(wl
);
939 ret
= wl1251_set_key_type(wl
, wl_cmd
, cmd
, key
, addr
);
941 wl1251_error("Set KEY type failed");
945 if (wl_cmd
->key_type
!= KEY_WEP_DEFAULT
)
946 memcpy(wl_cmd
->addr
, addr
, ETH_ALEN
);
948 if ((wl_cmd
->key_type
== KEY_TKIP_MIC_GROUP
) ||
949 (wl_cmd
->key_type
== KEY_TKIP_MIC_PAIRWISE
)) {
951 * We get the key in the following form:
952 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
953 * but the target is expecting:
954 * TKIP - RX MIC - TX MIC
956 memcpy(wl_cmd
->key
, key
->key
, 16);
957 memcpy(wl_cmd
->key
+ 16, key
->key
+ 24, 8);
958 memcpy(wl_cmd
->key
+ 24, key
->key
+ 16, 8);
961 memcpy(wl_cmd
->key
, key
->key
, key
->keylen
);
963 wl_cmd
->key_size
= key
->keylen
;
965 wl_cmd
->id
= key
->keyidx
;
966 wl_cmd
->ssid_profile
= 0;
968 wl1251_dump(DEBUG_CRYPT
, "TARGET KEY: ", wl_cmd
, sizeof(*wl_cmd
));
970 ret
= wl1251_cmd_send(wl
, CMD_SET_KEYS
, wl_cmd
, sizeof(*wl_cmd
));
972 wl1251_warning("could not set keys");
977 wl1251_ps_elp_sleep(wl
);
980 mutex_unlock(&wl
->mutex
);
988 static int wl1251_op_hw_scan(struct ieee80211_hw
*hw
,
989 struct ieee80211_vif
*vif
,
990 struct ieee80211_scan_request
*hw_req
)
992 struct cfg80211_scan_request
*req
= &hw_req
->req
;
993 struct wl1251
*wl
= hw
->priv
;
999 wl1251_debug(DEBUG_MAC80211
, "mac80211 hw scan");
1002 ssid
= req
->ssids
[0].ssid
;
1003 ssid_len
= req
->ssids
[0].ssid_len
;
1006 mutex_lock(&wl
->mutex
);
1009 wl1251_debug(DEBUG_SCAN
, "scan already in progress");
1014 ret
= wl1251_ps_elp_wakeup(wl
);
1018 if (hw
->conf
.flags
& IEEE80211_CONF_IDLE
) {
1019 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
1022 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1023 wl
->beacon_int
, wl
->dtim_period
);
1028 skb
= ieee80211_probereq_get(wl
->hw
, wl
->vif
->addr
, ssid
, ssid_len
,
1035 memcpy(skb_put(skb
, req
->ie_len
), req
->ie
, req
->ie_len
);
1037 ret
= wl1251_cmd_template_set(wl
, CMD_PROBE_REQ
, skb
->data
,
1043 ret
= wl1251_cmd_trigger_scan_to(wl
, 0);
1047 wl
->scanning
= true;
1049 ret
= wl1251_cmd_scan(wl
, ssid
, ssid_len
, req
->channels
,
1050 req
->n_channels
, WL1251_SCAN_NUM_PROBES
);
1052 wl1251_debug(DEBUG_SCAN
, "scan failed %d", ret
);
1053 wl
->scanning
= false;
1059 if (hw
->conf
.flags
& IEEE80211_CONF_IDLE
)
1060 ret
= wl1251_ps_set_mode(wl
, STATION_IDLE
);
1062 wl1251_ps_elp_sleep(wl
);
1065 mutex_unlock(&wl
->mutex
);
1070 static int wl1251_op_set_rts_threshold(struct ieee80211_hw
*hw
, u32 value
)
1072 struct wl1251
*wl
= hw
->priv
;
1075 mutex_lock(&wl
->mutex
);
1077 ret
= wl1251_ps_elp_wakeup(wl
);
1081 ret
= wl1251_acx_rts_threshold(wl
, (u16
) value
);
1083 wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret
);
1085 wl1251_ps_elp_sleep(wl
);
1088 mutex_unlock(&wl
->mutex
);
1093 static void wl1251_op_bss_info_changed(struct ieee80211_hw
*hw
,
1094 struct ieee80211_vif
*vif
,
1095 struct ieee80211_bss_conf
*bss_conf
,
1098 struct wl1251
*wl
= hw
->priv
;
1099 struct sk_buff
*beacon
, *skb
;
1103 wl1251_debug(DEBUG_MAC80211
, "mac80211 bss info changed");
1105 mutex_lock(&wl
->mutex
);
1107 ret
= wl1251_ps_elp_wakeup(wl
);
1111 if (changed
& BSS_CHANGED_CQM
) {
1112 ret
= wl1251_acx_low_rssi(wl
, bss_conf
->cqm_rssi_thold
,
1113 WL1251_DEFAULT_LOW_RSSI_WEIGHT
,
1114 WL1251_DEFAULT_LOW_RSSI_DEPTH
,
1115 WL1251_ACX_LOW_RSSI_TYPE_EDGE
);
1118 wl
->rssi_thold
= bss_conf
->cqm_rssi_thold
;
1121 if ((changed
& BSS_CHANGED_BSSID
) &&
1122 memcmp(wl
->bssid
, bss_conf
->bssid
, ETH_ALEN
)) {
1123 memcpy(wl
->bssid
, bss_conf
->bssid
, ETH_ALEN
);
1125 if (!is_zero_ether_addr(wl
->bssid
)) {
1126 ret
= wl1251_build_null_data(wl
);
1130 ret
= wl1251_build_qos_null_data(wl
);
1134 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1135 wl
->beacon_int
, wl
->dtim_period
);
1141 if (changed
& BSS_CHANGED_ASSOC
) {
1142 if (bss_conf
->assoc
) {
1143 wl
->beacon_int
= bss_conf
->beacon_int
;
1145 skb
= ieee80211_pspoll_get(wl
->hw
, wl
->vif
);
1149 ret
= wl1251_cmd_template_set(wl
, CMD_PS_POLL
,
1156 ret
= wl1251_acx_aid(wl
, bss_conf
->aid
);
1160 /* use defaults when not associated */
1161 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1162 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1165 if (changed
& BSS_CHANGED_ERP_SLOT
) {
1166 if (bss_conf
->use_short_slot
)
1167 ret
= wl1251_acx_slot(wl
, SLOT_TIME_SHORT
);
1169 ret
= wl1251_acx_slot(wl
, SLOT_TIME_LONG
);
1171 wl1251_warning("Set slot time failed %d", ret
);
1176 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1177 if (bss_conf
->use_short_preamble
)
1178 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_SHORT
);
1180 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_LONG
);
1183 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1184 if (bss_conf
->use_cts_prot
)
1185 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_ENABLE
);
1187 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_DISABLE
);
1189 wl1251_warning("Set ctsprotect failed %d", ret
);
1194 if (changed
& BSS_CHANGED_ARP_FILTER
) {
1195 __be32 addr
= bss_conf
->arp_addr_list
[0];
1196 WARN_ON(wl
->bss_type
!= BSS_TYPE_STA_BSS
);
1198 enable
= bss_conf
->arp_addr_cnt
== 1 && bss_conf
->assoc
;
1199 wl1251_acx_arp_ip_filter(wl
, enable
, addr
);
1205 if (changed
& BSS_CHANGED_BEACON
) {
1206 beacon
= ieee80211_beacon_get(hw
, vif
);
1210 ret
= wl1251_cmd_template_set(wl
, CMD_BEACON
, beacon
->data
,
1214 dev_kfree_skb(beacon
);
1218 ret
= wl1251_cmd_template_set(wl
, CMD_PROBE_RESP
, beacon
->data
,
1221 dev_kfree_skb(beacon
);
1226 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1227 wl
->beacon_int
, wl
->dtim_period
);
1234 wl1251_ps_elp_sleep(wl
);
1237 mutex_unlock(&wl
->mutex
);
1241 /* can't be const, mac80211 writes to this */
1242 static struct ieee80211_rate wl1251_rates
[] = {
1245 .hw_value_short
= 0x1, },
1248 .hw_value_short
= 0x2,
1249 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1252 .hw_value_short
= 0x4,
1253 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1256 .hw_value_short
= 0x20,
1257 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1260 .hw_value_short
= 0x8, },
1263 .hw_value_short
= 0x10, },
1266 .hw_value_short
= 0x40, },
1269 .hw_value_short
= 0x80, },
1272 .hw_value_short
= 0x200, },
1275 .hw_value_short
= 0x400, },
1278 .hw_value_short
= 0x800, },
1281 .hw_value_short
= 0x1000, },
1284 /* can't be const, mac80211 writes to this */
1285 static struct ieee80211_channel wl1251_channels
[] = {
1286 { .hw_value
= 1, .center_freq
= 2412},
1287 { .hw_value
= 2, .center_freq
= 2417},
1288 { .hw_value
= 3, .center_freq
= 2422},
1289 { .hw_value
= 4, .center_freq
= 2427},
1290 { .hw_value
= 5, .center_freq
= 2432},
1291 { .hw_value
= 6, .center_freq
= 2437},
1292 { .hw_value
= 7, .center_freq
= 2442},
1293 { .hw_value
= 8, .center_freq
= 2447},
1294 { .hw_value
= 9, .center_freq
= 2452},
1295 { .hw_value
= 10, .center_freq
= 2457},
1296 { .hw_value
= 11, .center_freq
= 2462},
1297 { .hw_value
= 12, .center_freq
= 2467},
1298 { .hw_value
= 13, .center_freq
= 2472},
1301 static int wl1251_op_conf_tx(struct ieee80211_hw
*hw
,
1302 struct ieee80211_vif
*vif
, u16 queue
,
1303 const struct ieee80211_tx_queue_params
*params
)
1305 enum wl1251_acx_ps_scheme ps_scheme
;
1306 struct wl1251
*wl
= hw
->priv
;
1309 mutex_lock(&wl
->mutex
);
1311 wl1251_debug(DEBUG_MAC80211
, "mac80211 conf tx %d", queue
);
1313 ret
= wl1251_ps_elp_wakeup(wl
);
1317 /* mac80211 uses units of 32 usec */
1318 ret
= wl1251_acx_ac_cfg(wl
, wl1251_tx_get_queue(queue
),
1319 params
->cw_min
, params
->cw_max
,
1320 params
->aifs
, params
->txop
* 32);
1325 ps_scheme
= WL1251_ACX_PS_SCHEME_UPSD_TRIGGER
;
1327 ps_scheme
= WL1251_ACX_PS_SCHEME_LEGACY
;
1329 ret
= wl1251_acx_tid_cfg(wl
, wl1251_tx_get_queue(queue
),
1331 wl1251_tx_get_queue(queue
), ps_scheme
,
1332 WL1251_ACX_ACK_POLICY_LEGACY
);
1337 wl1251_ps_elp_sleep(wl
);
1340 mutex_unlock(&wl
->mutex
);
1345 static int wl1251_op_get_survey(struct ieee80211_hw
*hw
, int idx
,
1346 struct survey_info
*survey
)
1348 struct wl1251
*wl
= hw
->priv
;
1349 struct ieee80211_conf
*conf
= &hw
->conf
;
1354 survey
->channel
= conf
->chandef
.chan
;
1355 survey
->filled
= SURVEY_INFO_NOISE_DBM
;
1356 survey
->noise
= wl
->noise
;
1361 /* can't be const, mac80211 writes to this */
1362 static struct ieee80211_supported_band wl1251_band_2ghz
= {
1363 .channels
= wl1251_channels
,
1364 .n_channels
= ARRAY_SIZE(wl1251_channels
),
1365 .bitrates
= wl1251_rates
,
1366 .n_bitrates
= ARRAY_SIZE(wl1251_rates
),
1369 static const struct ieee80211_ops wl1251_ops
= {
1370 .start
= wl1251_op_start
,
1371 .stop
= wl1251_op_stop
,
1372 .add_interface
= wl1251_op_add_interface
,
1373 .remove_interface
= wl1251_op_remove_interface
,
1374 .config
= wl1251_op_config
,
1375 .prepare_multicast
= wl1251_op_prepare_multicast
,
1376 .configure_filter
= wl1251_op_configure_filter
,
1378 .set_key
= wl1251_op_set_key
,
1379 .hw_scan
= wl1251_op_hw_scan
,
1380 .bss_info_changed
= wl1251_op_bss_info_changed
,
1381 .set_rts_threshold
= wl1251_op_set_rts_threshold
,
1382 .conf_tx
= wl1251_op_conf_tx
,
1383 .get_survey
= wl1251_op_get_survey
,
1386 static int wl1251_read_eeprom_byte(struct wl1251
*wl
, off_t offset
, u8
*data
)
1388 unsigned long timeout
;
1390 wl1251_reg_write32(wl
, EE_ADDR
, offset
);
1391 wl1251_reg_write32(wl
, EE_CTL
, EE_CTL_READ
);
1393 /* EE_CTL_READ clears when data is ready */
1394 timeout
= jiffies
+ msecs_to_jiffies(100);
1396 if (!(wl1251_reg_read32(wl
, EE_CTL
) & EE_CTL_READ
))
1399 if (time_after(jiffies
, timeout
))
1405 *data
= wl1251_reg_read32(wl
, EE_DATA
);
1409 static int wl1251_read_eeprom(struct wl1251
*wl
, off_t offset
,
1410 u8
*data
, size_t len
)
1415 wl1251_reg_write32(wl
, EE_START
, 0);
1417 for (i
= 0; i
< len
; i
++) {
1418 ret
= wl1251_read_eeprom_byte(wl
, offset
+ i
, &data
[i
]);
1426 static int wl1251_read_eeprom_mac(struct wl1251
*wl
)
1431 wl1251_set_partition(wl
, 0, 0, REGISTERS_BASE
, REGISTERS_DOWN_SIZE
);
1433 ret
= wl1251_read_eeprom(wl
, 0x1c, mac
, sizeof(mac
));
1435 wl1251_warning("failed to read MAC address from EEPROM");
1439 /* MAC is stored in reverse order */
1440 for (i
= 0; i
< ETH_ALEN
; i
++)
1441 wl
->mac_addr
[i
] = mac
[ETH_ALEN
- i
- 1];
1446 static int wl1251_register_hw(struct wl1251
*wl
)
1450 if (wl
->mac80211_registered
)
1453 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
1455 ret
= ieee80211_register_hw(wl
->hw
);
1457 wl1251_error("unable to register mac80211 hw: %d", ret
);
1461 wl
->mac80211_registered
= true;
1463 wl1251_notice("loaded");
1468 int wl1251_init_ieee80211(struct wl1251
*wl
)
1472 /* The tx descriptor buffer and the TKIP space */
1473 wl
->hw
->extra_tx_headroom
= sizeof(struct tx_double_buffer_desc
)
1474 + WL1251_TKIP_IV_SPACE
;
1477 /* FIXME: find a proper value */
1479 ieee80211_hw_set(wl
->hw
, SIGNAL_DBM
);
1480 ieee80211_hw_set(wl
->hw
, SUPPORTS_PS
);
1482 wl
->hw
->wiphy
->interface_modes
= BIT(NL80211_IFTYPE_STATION
) |
1483 BIT(NL80211_IFTYPE_ADHOC
);
1484 wl
->hw
->wiphy
->max_scan_ssids
= 1;
1485 wl
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = &wl1251_band_2ghz
;
1490 wl1251_read_eeprom_mac(wl
);
1492 ret
= wl1251_register_hw(wl
);
1496 wl1251_debugfs_init(wl
);
1497 wl1251_notice("initialized");
1504 EXPORT_SYMBOL_GPL(wl1251_init_ieee80211
);
1506 struct ieee80211_hw
*wl1251_alloc_hw(void)
1508 struct ieee80211_hw
*hw
;
1511 static const u8 nokia_oui
[3] = {0x00, 0x1f, 0xdf};
1513 hw
= ieee80211_alloc_hw(sizeof(*wl
), &wl1251_ops
);
1515 wl1251_error("could not alloc ieee80211_hw");
1516 return ERR_PTR(-ENOMEM
);
1520 memset(wl
, 0, sizeof(*wl
));
1524 wl
->data_in_count
= 0;
1526 skb_queue_head_init(&wl
->tx_queue
);
1528 INIT_DELAYED_WORK(&wl
->elp_work
, wl1251_elp_work
);
1529 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
1530 wl
->monitor_present
= false;
1532 wl
->scanning
= false;
1533 wl
->bss_type
= MAX_BSS_TYPE
;
1534 wl
->default_key
= 0;
1538 wl
->rx_current_buffer
= 0;
1540 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
1541 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
1543 wl
->station_mode
= STATION_ACTIVE_MODE
;
1544 wl
->psm_requested
= false;
1545 wl
->psm_entry_retry
= 0;
1546 wl
->tx_queue_stopped
= false;
1547 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
1549 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1550 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1553 for (i
= 0; i
< FW_TX_CMPLT_BLOCK_SIZE
; i
++)
1554 wl
->tx_frames
[i
] = NULL
;
1556 wl
->next_tx_complete
= 0;
1558 INIT_WORK(&wl
->irq_work
, wl1251_irq_work
);
1559 INIT_WORK(&wl
->tx_work
, wl1251_tx_work
);
1562 * In case our MAC address is not correctly set,
1563 * we use a random but Nokia MAC.
1565 memcpy(wl
->mac_addr
, nokia_oui
, 3);
1566 get_random_bytes(wl
->mac_addr
+ 3, 3);
1568 wl
->state
= WL1251_STATE_OFF
;
1569 mutex_init(&wl
->mutex
);
1571 wl
->tx_mgmt_frm_rate
= DEFAULT_HW_GEN_TX_RATE
;
1572 wl
->tx_mgmt_frm_mod
= DEFAULT_HW_GEN_MODULATION_TYPE
;
1574 wl
->rx_descriptor
= kmalloc(sizeof(*wl
->rx_descriptor
), GFP_KERNEL
);
1575 if (!wl
->rx_descriptor
) {
1576 wl1251_error("could not allocate memory for rx descriptor");
1577 ieee80211_free_hw(hw
);
1578 return ERR_PTR(-ENOMEM
);
1583 EXPORT_SYMBOL_GPL(wl1251_alloc_hw
);
1585 int wl1251_free_hw(struct wl1251
*wl
)
1587 ieee80211_unregister_hw(wl
->hw
);
1589 wl1251_debugfs_exit(wl
);
1591 kfree(wl
->target_mem_map
);
1592 kfree(wl
->data_path
);
1598 kfree(wl
->rx_descriptor
);
1599 wl
->rx_descriptor
= NULL
;
1601 ieee80211_free_hw(wl
->hw
);
1605 EXPORT_SYMBOL_GPL(wl1251_free_hw
);
1607 MODULE_DESCRIPTION("TI wl1251 Wireless LAN Driver Core");
1608 MODULE_LICENSE("GPL");
1609 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
1610 MODULE_FIRMWARE(WL1251_FW_NAME
);
1611 MODULE_FIRMWARE(WL1251_NVS_NAME
);