drivers/rtc/rtc-pcf8523.c

   1 /*
   2  * Copyright (C) 2012 Avionic Design GmbH
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <linux/bcd.h>
  10 #include <linux/i2c.h>
  11 #include <linux/module.h>
  12 #include <linux/rtc.h>
  13 #include <linux/of.h>
  14
  15 #define DRIVER_NAME "rtc-pcf8523"
  16
  17 #define REG_CONTROL1 0x00
  18 #define REG_CONTROL1_CAP_SEL (1 << 7)
  19 #define REG_CONTROL1_STOP    (1 << 5)
  20
  21 #define REG_CONTROL3 0x02
  22 #define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
  23 #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
  24 #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
  25 #define REG_CONTROL3_PM_MASK 0xe0
  26 #define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
  27
  28 #define REG_SECONDS  0x03
  29 #define REG_SECONDS_OS (1 << 7)
  30
  31 #define REG_MINUTES  0x04
  32 #define REG_HOURS    0x05
  33 #define REG_DAYS     0x06
  34 #define REG_WEEKDAYS 0x07
  35 #define REG_MONTHS   0x08
  36 #define REG_YEARS    0x09
  37
  38 struct pcf8523 {
  39         struct rtc_device *rtc;
  40 };
  41
  42 static int pcf8523_read(struct i2c_client *client, u8 reg, u8 *valuep)
  43 {
  44         struct i2c_msg msgs[2];
  45         u8 value = 0;
  46         int err;
  47
  48         msgs[0].addr = client->addr;
  49         msgs[0].flags = 0;
  50         msgs[0].len = sizeof(reg);
  51         msgs[0].buf = &reg;
  52
  53         msgs[1].addr = client->addr;
  54         msgs[1].flags = I2C_M_RD;
  55         msgs[1].len = sizeof(value);
  56         msgs[1].buf = &value;
  57
  58         err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
  59         if (err < 0)
  60                 return err;
  61
  62         *valuep = value;
  63
  64         return 0;
  65 }
  66
  67 static int pcf8523_write(struct i2c_client *client, u8 reg, u8 value)
  68 {
  69         u8 buffer[2] = { reg, value };
  70         struct i2c_msg msg;
  71         int err;
  72
  73         msg.addr = client->addr;
  74         msg.flags = 0;
  75         msg.len = sizeof(buffer);
  76         msg.buf = buffer;
  77
  78         err = i2c_transfer(client->adapter, &msg, 1);
  79         if (err < 0)
  80                 return err;
  81
  82         return 0;
  83 }
  84
  85 static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
  86 {
  87         u8 value;
  88         int err;
  89
  90         err = pcf8523_read(client, REG_CONTROL1, &value);
  91         if (err < 0)
  92                 return err;
  93
  94         if (!high)
  95                 value &= ~REG_CONTROL1_CAP_SEL;
  96         else
  97                 value |= REG_CONTROL1_CAP_SEL;
  98
  99         err = pcf8523_write(client, REG_CONTROL1, value);
 100         if (err < 0)
 101                 return err;
 102
 103         return err;
 104 }
 105
 106 static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
 107 {
 108         u8 value;
 109         int err;
 110
 111         err = pcf8523_read(client, REG_CONTROL3, &value);
 112         if (err < 0)
 113                 return err;
 114
 115         value = (value & ~REG_CONTROL3_PM_MASK) | pm;
 116
 117         err = pcf8523_write(client, REG_CONTROL3, value);
 118         if (err < 0)
 119                 return err;
 120
 121         return 0;
 122 }
 123
 124 static int pcf8523_stop_rtc(struct i2c_client *client)
 125 {
 126         u8 value;
 127         int err;
 128
 129         err = pcf8523_read(client, REG_CONTROL1, &value);
 130         if (err < 0)
 131                 return err;
 132
 133         value |= REG_CONTROL1_STOP;
 134
 135         err = pcf8523_write(client, REG_CONTROL1, value);
 136         if (err < 0)
 137                 return err;
 138
 139         return 0;
 140 }
 141
 142 static int pcf8523_start_rtc(struct i2c_client *client)
 143 {
 144         u8 value;
 145         int err;
 146
 147         err = pcf8523_read(client, REG_CONTROL1, &value);
 148         if (err < 0)
 149                 return err;
 150
 151         value &= ~REG_CONTROL1_STOP;
 152
 153         err = pcf8523_write(client, REG_CONTROL1, value);
 154         if (err < 0)
 155                 return err;
 156
 157         return 0;
 158 }
 159
 160 static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
 161 {
 162         struct i2c_client *client = to_i2c_client(dev);
 163         u8 start = REG_SECONDS, regs[7];
 164         struct i2c_msg msgs[2];
 165         int err;
 166
 167         msgs[0].addr = client->addr;
 168         msgs[0].flags = 0;
 169         msgs[0].len = 1;
 170         msgs[0].buf = &start;
 171
 172         msgs[1].addr = client->addr;
 173         msgs[1].flags = I2C_M_RD;
 174         msgs[1].len = sizeof(regs);
 175         msgs[1].buf = regs;
 176
 177         err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 178         if (err < 0)
 179                 return err;
 180
 181         if (regs[0] & REG_SECONDS_OS)
 182                 return -EINVAL;
 183
 184         tm->tm_sec = bcd2bin(regs[0] & 0x7f);
 185         tm->tm_min = bcd2bin(regs[1] & 0x7f);
 186         tm->tm_hour = bcd2bin(regs[2] & 0x3f);
 187         tm->tm_mday = bcd2bin(regs[3] & 0x3f);
 188         tm->tm_wday = regs[4] & 0x7;
 189         tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
 190         tm->tm_year = bcd2bin(regs[6]) + 100;
 191
 192         return rtc_valid_tm(tm);
 193 }
 194
 195 static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
 196 {
 197         struct i2c_client *client = to_i2c_client(dev);
 198         struct i2c_msg msg;
 199         u8 regs[8];
 200         int err;
 201
 202         /*
 203          * The hardware can only store values between 0 and 99 in it's YEAR
 204          * register (with 99 overflowing to 0 on increment).
 205          * After 2100-02-28 we could start interpreting the year to be in the
 206          * interval [2100, 2199], but there is no path to switch in a smooth way
 207          * because the chip handles YEAR=0x00 (and the out-of-spec
 208          * YEAR=0xa0) as a leap year, but 2100 isn't.
 209          */
 210         if (tm->tm_year < 100 || tm->tm_year >= 200)
 211                 return -EINVAL;
 212
 213         err = pcf8523_stop_rtc(client);
 214         if (err < 0)
 215                 return err;
 216
 217         regs[0] = REG_SECONDS;
 218         /* This will purposely overwrite REG_SECONDS_OS */
 219         regs[1] = bin2bcd(tm->tm_sec);
 220         regs[2] = bin2bcd(tm->tm_min);
 221         regs[3] = bin2bcd(tm->tm_hour);
 222         regs[4] = bin2bcd(tm->tm_mday);
 223         regs[5] = tm->tm_wday;
 224         regs[6] = bin2bcd(tm->tm_mon + 1);
 225         regs[7] = bin2bcd(tm->tm_year - 100);
 226
 227         msg.addr = client->addr;
 228         msg.flags = 0;
 229         msg.len = sizeof(regs);
 230         msg.buf = regs;
 231
 232         err = i2c_transfer(client->adapter, &msg, 1);
 233         if (err < 0) {
 234                 /*
 235                  * If the time cannot be set, restart the RTC anyway. Note
 236                  * that errors are ignored if the RTC cannot be started so
 237                  * that we have a chance to propagate the original error.
 238                  */
 239                 pcf8523_start_rtc(client);
 240                 return err;
 241         }
 242
 243         return pcf8523_start_rtc(client);
 244 }
 245
 246 #ifdef CONFIG_RTC_INTF_DEV
 247 static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
 248                              unsigned long arg)
 249 {
 250         struct i2c_client *client = to_i2c_client(dev);
 251         u8 value;
 252         int ret = 0, err;
 253
 254         switch (cmd) {
 255         case RTC_VL_READ:
 256                 err = pcf8523_read(client, REG_CONTROL3, &value);
 257                 if (err < 0)
 258                         return err;
 259
 260                 if (value & REG_CONTROL3_BLF)
 261                         ret = 1;
 262
 263                 if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
 264                         return -EFAULT;
 265
 266                 return 0;
 267         default:
 268                 return -ENOIOCTLCMD;
 269         }
 270 }
 271 #else
 272 #define pcf8523_rtc_ioctl NULL
 273 #endif
 274
 275 static const struct rtc_class_ops pcf8523_rtc_ops = {
 276         .read_time = pcf8523_rtc_read_time,
 277         .set_time = pcf8523_rtc_set_time,
 278         .ioctl = pcf8523_rtc_ioctl,
 279 };
 280
 281 static int pcf8523_probe(struct i2c_client *client,
 282                          const struct i2c_device_id *id)
 283 {
 284         struct pcf8523 *pcf;
 285         int err;
 286
 287         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 288                 return -ENODEV;
 289
 290         pcf = devm_kzalloc(&client->dev, sizeof(*pcf), GFP_KERNEL);
 291         if (!pcf)
 292                 return -ENOMEM;
 293
 294         err = pcf8523_select_capacitance(client, true);
 295         if (err < 0)
 296                 return err;
 297
 298         err = pcf8523_set_pm(client, 0);
 299         if (err < 0)
 300                 return err;
 301
 302         pcf->rtc = devm_rtc_device_register(&client->dev, DRIVER_NAME,
 303                                        &pcf8523_rtc_ops, THIS_MODULE);
 304         if (IS_ERR(pcf->rtc))
 305                 return PTR_ERR(pcf->rtc);
 306
 307         i2c_set_clientdata(client, pcf);
 308
 309         return 0;
 310 }
 311
 312 static const struct i2c_device_id pcf8523_id[] = {
 313         { "pcf8523", 0 },
 314         { }
 315 };
 316 MODULE_DEVICE_TABLE(i2c, pcf8523_id);
 317
 318 #ifdef CONFIG_OF
 319 static const struct of_device_id pcf8523_of_match[] = {
 320         { .compatible = "nxp,pcf8523" },
 321         { }
 322 };
 323 MODULE_DEVICE_TABLE(of, pcf8523_of_match);
 324 #endif
 325
 326 static struct i2c_driver pcf8523_driver = {
 327         .driver = {
 328                 .name = DRIVER_NAME,
 329                 .of_match_table = of_match_ptr(pcf8523_of_match),
 330         },
 331         .probe = pcf8523_probe,
 332         .id_table = pcf8523_id,
 333 };
 334 module_i2c_driver(pcf8523_driver);
 335
 336 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
 337 MODULE_DESCRIPTION("NXP PCF8523 RTC driver");
 338 MODULE_LICENSE("GPL v2");