2 * Copyright 2012 by Oracle Inc
3 * Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
5 * This code borrows ideas from https://lkml.org/lkml/2011/11/30/249
6 * so many thanks go to Kevin Tian <kevin.tian@intel.com>
7 * and Yu Ke <ke.yu@intel.com>.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms and conditions of the GNU General Public License,
11 * version 2, as published by the Free Software Foundation.
13 * This program is distributed in the hope it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 #include <linux/cpumask.h>
23 #include <linux/cpufreq.h>
24 #include <linux/freezer.h>
25 #include <linux/kernel.h>
26 #include <linux/kthread.h>
27 #include <linux/init.h>
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/acpi.h>
31 #include <acpi/processor.h>
33 #include <xen/xen-ops.h>
34 #include <xen/interface/platform.h>
35 #include <asm/xen/hypercall.h>
37 static int no_hypercall
;
38 MODULE_PARM_DESC(off
, "Inhibit the hypercall.");
39 module_param_named(off
, no_hypercall
, int, 0400);
42 * Note: Do not convert the acpi_id* below to cpumask_var_t or use cpumask_bit
43 * - as those shrink to nr_cpu_bits (which is dependent on possible_cpu), which
44 * can be less than what we want to put in. Instead use the 'nr_acpi_bits'
45 * which is dynamically computed based on the MADT or x2APIC table.
47 static unsigned int nr_acpi_bits
;
48 /* Mutex to protect the acpi_ids_done - for CPU hotplug use. */
49 static DEFINE_MUTEX(acpi_ids_mutex
);
50 /* Which ACPI ID we have processed from 'struct acpi_processor'. */
51 static unsigned long *acpi_ids_done
;
52 /* Which ACPI ID exist in the SSDT/DSDT processor definitions. */
53 static unsigned long *acpi_id_present
;
54 /* And if there is an _CST definition (or a PBLK) for the ACPI IDs */
55 static unsigned long *acpi_id_cst_present
;
57 static int push_cxx_to_hypervisor(struct acpi_processor
*_pr
)
59 struct xen_platform_op op
= {
60 .cmd
= XENPF_set_processor_pminfo
,
61 .interface_version
= XENPF_INTERFACE_VERSION
,
62 .u
.set_pminfo
.id
= _pr
->acpi_id
,
63 .u
.set_pminfo
.type
= XEN_PM_CX
,
65 struct xen_processor_cx
*dst_cx
, *dst_cx_states
= NULL
;
66 struct acpi_processor_cx
*cx
;
70 dst_cx_states
= kcalloc(_pr
->power
.count
,
71 sizeof(struct xen_processor_cx
), GFP_KERNEL
);
75 for (ok
= 0, i
= 1; i
<= _pr
->power
.count
; i
++) {
76 cx
= &_pr
->power
.states
[i
];
80 dst_cx
= &(dst_cx_states
[ok
++]);
82 dst_cx
->reg
.space_id
= ACPI_ADR_SPACE_SYSTEM_IO
;
83 if (cx
->entry_method
== ACPI_CSTATE_SYSTEMIO
) {
84 dst_cx
->reg
.bit_width
= 8;
85 dst_cx
->reg
.bit_offset
= 0;
86 dst_cx
->reg
.access_size
= 1;
88 dst_cx
->reg
.space_id
= ACPI_ADR_SPACE_FIXED_HARDWARE
;
89 if (cx
->entry_method
== ACPI_CSTATE_FFH
) {
90 /* NATIVE_CSTATE_BEYOND_HALT */
91 dst_cx
->reg
.bit_offset
= 2;
92 dst_cx
->reg
.bit_width
= 1; /* VENDOR_INTEL */
94 dst_cx
->reg
.access_size
= 0;
96 dst_cx
->reg
.address
= cx
->address
;
98 dst_cx
->type
= cx
->type
;
99 dst_cx
->latency
= cx
->latency
;
102 set_xen_guest_handle(dst_cx
->dp
, NULL
);
105 pr_debug("No _Cx for ACPI CPU %u\n", _pr
->acpi_id
);
106 kfree(dst_cx_states
);
109 op
.u
.set_pminfo
.power
.count
= ok
;
110 op
.u
.set_pminfo
.power
.flags
.bm_control
= _pr
->flags
.bm_control
;
111 op
.u
.set_pminfo
.power
.flags
.bm_check
= _pr
->flags
.bm_check
;
112 op
.u
.set_pminfo
.power
.flags
.has_cst
= _pr
->flags
.has_cst
;
113 op
.u
.set_pminfo
.power
.flags
.power_setup_done
=
114 _pr
->flags
.power_setup_done
;
116 set_xen_guest_handle(op
.u
.set_pminfo
.power
.states
, dst_cx_states
);
119 ret
= HYPERVISOR_platform_op(&op
);
122 pr_debug("ACPI CPU%u - C-states uploaded.\n", _pr
->acpi_id
);
123 for (i
= 1; i
<= _pr
->power
.count
; i
++) {
124 cx
= &_pr
->power
.states
[i
];
127 pr_debug(" C%d: %s %d uS\n",
128 cx
->type
, cx
->desc
, (u32
)cx
->latency
);
130 } else if ((ret
!= -EINVAL
) && (ret
!= -ENOSYS
))
131 /* EINVAL means the ACPI ID is incorrect - meaning the ACPI
132 * table is referencing a non-existing CPU - which can happen
133 * with broken ACPI tables. */
134 pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n",
137 kfree(dst_cx_states
);
141 static struct xen_processor_px
*
142 xen_copy_pss_data(struct acpi_processor
*_pr
,
143 struct xen_processor_performance
*dst_perf
)
145 struct xen_processor_px
*dst_states
= NULL
;
148 BUILD_BUG_ON(sizeof(struct xen_processor_px
) !=
149 sizeof(struct acpi_processor_px
));
151 dst_states
= kcalloc(_pr
->performance
->state_count
,
152 sizeof(struct xen_processor_px
), GFP_KERNEL
);
154 return ERR_PTR(-ENOMEM
);
156 dst_perf
->state_count
= _pr
->performance
->state_count
;
157 for (i
= 0; i
< _pr
->performance
->state_count
; i
++) {
158 /* Fortunatly for us, they are both the same size */
159 memcpy(&(dst_states
[i
]), &(_pr
->performance
->states
[i
]),
160 sizeof(struct acpi_processor_px
));
164 static int xen_copy_psd_data(struct acpi_processor
*_pr
,
165 struct xen_processor_performance
*dst
)
167 struct acpi_psd_package
*pdomain
;
169 BUILD_BUG_ON(sizeof(struct xen_psd_package
) !=
170 sizeof(struct acpi_psd_package
));
172 /* This information is enumerated only if acpi_processor_preregister_performance
175 dst
->shared_type
= _pr
->performance
->shared_type
;
177 pdomain
= &(_pr
->performance
->domain_info
);
179 /* 'acpi_processor_preregister_performance' does not parse if the
180 * num_processors <= 1, but Xen still requires it. Do it manually here.
182 if (pdomain
->num_processors
<= 1) {
183 if (pdomain
->coord_type
== DOMAIN_COORD_TYPE_SW_ALL
)
184 dst
->shared_type
= CPUFREQ_SHARED_TYPE_ALL
;
185 else if (pdomain
->coord_type
== DOMAIN_COORD_TYPE_HW_ALL
)
186 dst
->shared_type
= CPUFREQ_SHARED_TYPE_HW
;
187 else if (pdomain
->coord_type
== DOMAIN_COORD_TYPE_SW_ANY
)
188 dst
->shared_type
= CPUFREQ_SHARED_TYPE_ANY
;
191 memcpy(&(dst
->domain_info
), pdomain
, sizeof(struct acpi_psd_package
));
194 static int xen_copy_pct_data(struct acpi_pct_register
*pct
,
195 struct xen_pct_register
*dst_pct
)
197 /* It would be nice if you could just do 'memcpy(pct, dst_pct') but
198 * sadly the Xen structure did not have the proper padding so the
199 * descriptor field takes two (dst_pct) bytes instead of one (pct).
201 dst_pct
->descriptor
= pct
->descriptor
;
202 dst_pct
->length
= pct
->length
;
203 dst_pct
->space_id
= pct
->space_id
;
204 dst_pct
->bit_width
= pct
->bit_width
;
205 dst_pct
->bit_offset
= pct
->bit_offset
;
206 dst_pct
->reserved
= pct
->reserved
;
207 dst_pct
->address
= pct
->address
;
210 static int push_pxx_to_hypervisor(struct acpi_processor
*_pr
)
213 struct xen_platform_op op
= {
214 .cmd
= XENPF_set_processor_pminfo
,
215 .interface_version
= XENPF_INTERFACE_VERSION
,
216 .u
.set_pminfo
.id
= _pr
->acpi_id
,
217 .u
.set_pminfo
.type
= XEN_PM_PX
,
219 struct xen_processor_performance
*dst_perf
;
220 struct xen_processor_px
*dst_states
= NULL
;
222 dst_perf
= &op
.u
.set_pminfo
.perf
;
224 dst_perf
->platform_limit
= _pr
->performance_platform_limit
;
225 dst_perf
->flags
|= XEN_PX_PPC
;
226 xen_copy_pct_data(&(_pr
->performance
->control_register
),
227 &dst_perf
->control_register
);
228 xen_copy_pct_data(&(_pr
->performance
->status_register
),
229 &dst_perf
->status_register
);
230 dst_perf
->flags
|= XEN_PX_PCT
;
231 dst_states
= xen_copy_pss_data(_pr
, dst_perf
);
232 if (!IS_ERR_OR_NULL(dst_states
)) {
233 set_xen_guest_handle(dst_perf
->states
, dst_states
);
234 dst_perf
->flags
|= XEN_PX_PSS
;
236 if (!xen_copy_psd_data(_pr
, dst_perf
))
237 dst_perf
->flags
|= XEN_PX_PSD
;
239 if (dst_perf
->flags
!= (XEN_PX_PSD
| XEN_PX_PSS
| XEN_PX_PCT
| XEN_PX_PPC
)) {
240 pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n",
241 _pr
->acpi_id
, dst_perf
->flags
);
247 ret
= HYPERVISOR_platform_op(&op
);
250 struct acpi_processor_performance
*perf
;
253 perf
= _pr
->performance
;
254 pr_debug("ACPI CPU%u - P-states uploaded.\n", _pr
->acpi_id
);
255 for (i
= 0; i
< perf
->state_count
; i
++) {
256 pr_debug(" %cP%d: %d MHz, %d mW, %d uS\n",
257 (i
== perf
->state
? '*' : ' '), i
,
258 (u32
) perf
->states
[i
].core_frequency
,
259 (u32
) perf
->states
[i
].power
,
260 (u32
) perf
->states
[i
].transition_latency
);
262 } else if ((ret
!= -EINVAL
) && (ret
!= -ENOSYS
))
263 /* EINVAL means the ACPI ID is incorrect - meaning the ACPI
264 * table is referencing a non-existing CPU - which can happen
265 * with broken ACPI tables. */
266 pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n",
269 if (!IS_ERR_OR_NULL(dst_states
))
274 static int upload_pm_data(struct acpi_processor
*_pr
)
278 mutex_lock(&acpi_ids_mutex
);
279 if (__test_and_set_bit(_pr
->acpi_id
, acpi_ids_done
)) {
280 mutex_unlock(&acpi_ids_mutex
);
283 if (_pr
->flags
.power
)
284 err
= push_cxx_to_hypervisor(_pr
);
286 if (_pr
->performance
&& _pr
->performance
->states
)
287 err
|= push_pxx_to_hypervisor(_pr
);
289 mutex_unlock(&acpi_ids_mutex
);
292 static unsigned int __init
get_max_acpi_id(void)
294 struct xenpf_pcpuinfo
*info
;
295 struct xen_platform_op op
= {
296 .cmd
= XENPF_get_cpuinfo
,
297 .interface_version
= XENPF_INTERFACE_VERSION
,
300 unsigned int i
, last_cpu
, max_acpi_id
= 0;
302 info
= &op
.u
.pcpu_info
;
305 ret
= HYPERVISOR_platform_op(&op
);
309 /* The max_present is the same irregardless of the xen_cpuid */
310 last_cpu
= op
.u
.pcpu_info
.max_present
;
311 for (i
= 0; i
<= last_cpu
; i
++) {
313 ret
= HYPERVISOR_platform_op(&op
);
316 max_acpi_id
= max(info
->acpi_id
, max_acpi_id
);
318 max_acpi_id
*= 2; /* Slack for CPU hotplug support. */
319 pr_debug("Max ACPI ID: %u\n", max_acpi_id
);
323 * The read_acpi_id and check_acpi_ids are there to support the Xen
324 * oddity of virtual CPUs != physical CPUs in the initial domain.
325 * The user can supply 'xen_max_vcpus=X' on the Xen hypervisor line
326 * which will band the amount of CPUs the initial domain can see.
327 * In general that is OK, except it plays havoc with any of the
328 * for_each_[present|online]_cpu macros which are banded to the virtual
332 read_acpi_id(acpi_handle handle
, u32 lvl
, void *context
, void **rv
)
336 acpi_object_type acpi_type
;
337 unsigned long long tmp
;
338 union acpi_object object
= { 0 };
339 struct acpi_buffer buffer
= { sizeof(union acpi_object
), &object
};
340 acpi_io_address pblk
= 0;
342 status
= acpi_get_type(handle
, &acpi_type
);
343 if (ACPI_FAILURE(status
))
347 case ACPI_TYPE_PROCESSOR
:
348 status
= acpi_evaluate_object(handle
, NULL
, NULL
, &buffer
);
349 if (ACPI_FAILURE(status
))
351 acpi_id
= object
.processor
.proc_id
;
352 pblk
= object
.processor
.pblk_address
;
354 case ACPI_TYPE_DEVICE
:
355 status
= acpi_evaluate_integer(handle
, "_UID", NULL
, &tmp
);
356 if (ACPI_FAILURE(status
))
363 /* There are more ACPI Processor objects than in x2APIC or MADT.
364 * This can happen with incorrect ACPI SSDT declerations. */
365 if (acpi_id
> nr_acpi_bits
) {
366 pr_debug("We only have %u, trying to set %u\n",
367 nr_acpi_bits
, acpi_id
);
370 /* OK, There is a ACPI Processor object */
371 __set_bit(acpi_id
, acpi_id_present
);
373 pr_debug("ACPI CPU%u w/ PBLK:0x%lx\n", acpi_id
, (unsigned long)pblk
);
375 status
= acpi_evaluate_object(handle
, "_CST", NULL
, &buffer
);
376 if (ACPI_FAILURE(status
)) {
380 /* .. and it has a C-state */
381 __set_bit(acpi_id
, acpi_id_cst_present
);
385 static int check_acpi_ids(struct acpi_processor
*pr_backup
)
391 if (acpi_id_present
&& acpi_id_cst_present
)
392 /* OK, done this once .. skip to uploading */
395 /* All online CPUs have been processed at this stage. Now verify
396 * whether in fact "online CPUs" == physical CPUs.
398 acpi_id_present
= kcalloc(BITS_TO_LONGS(nr_acpi_bits
), sizeof(unsigned long), GFP_KERNEL
);
399 if (!acpi_id_present
)
402 acpi_id_cst_present
= kcalloc(BITS_TO_LONGS(nr_acpi_bits
), sizeof(unsigned long), GFP_KERNEL
);
403 if (!acpi_id_cst_present
) {
404 kfree(acpi_id_present
);
408 acpi_walk_namespace(ACPI_TYPE_PROCESSOR
, ACPI_ROOT_OBJECT
,
410 read_acpi_id
, NULL
, NULL
, NULL
);
411 acpi_get_devices("ACPI0007", read_acpi_id
, NULL
, NULL
);
414 if (!bitmap_equal(acpi_id_present
, acpi_ids_done
, nr_acpi_bits
)) {
416 for_each_set_bit(i
, acpi_id_present
, nr_acpi_bits
) {
417 pr_backup
->acpi_id
= i
;
418 /* Mask out C-states if there are no _CST or PBLK */
419 pr_backup
->flags
.power
= test_bit(i
, acpi_id_cst_present
);
420 (void)upload_pm_data(pr_backup
);
426 static int __init
check_prereq(void)
428 struct cpuinfo_x86
*c
= &cpu_data(0);
430 if (!xen_initial_domain())
433 if (!acpi_gbl_FADT
.smi_command
)
436 if (c
->x86_vendor
== X86_VENDOR_INTEL
) {
437 if (!cpu_has(c
, X86_FEATURE_EST
))
442 if (c
->x86_vendor
== X86_VENDOR_AMD
) {
443 /* Copied from powernow-k8.h, can't include ../cpufreq/powernow
444 * as we get compile warnings for the static functions.
446 #define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
447 #define USE_HW_PSTATE 0x00000080
448 u32 eax
, ebx
, ecx
, edx
;
449 cpuid(CPUID_FREQ_VOLT_CAPABILITIES
, &eax
, &ebx
, &ecx
, &edx
);
450 if ((edx
& USE_HW_PSTATE
) != USE_HW_PSTATE
)
456 /* acpi_perf_data is a pointer to percpu data. */
457 static struct acpi_processor_performance __percpu
*acpi_perf_data
;
459 static void free_acpi_perf_data(void)
463 /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
464 for_each_possible_cpu(i
)
465 free_cpumask_var(per_cpu_ptr(acpi_perf_data
, i
)
467 free_percpu(acpi_perf_data
);
470 static int xen_upload_processor_pm_data(void)
472 struct acpi_processor
*pr_backup
= NULL
;
476 pr_info("Uploading Xen processor PM info\n");
478 for_each_possible_cpu(i
) {
479 struct acpi_processor
*_pr
;
480 _pr
= per_cpu(processors
, i
/* APIC ID */);
485 pr_backup
= kzalloc(sizeof(struct acpi_processor
), GFP_KERNEL
);
487 memcpy(pr_backup
, _pr
, sizeof(struct acpi_processor
));
489 (void)upload_pm_data(_pr
);
492 rc
= check_acpi_ids(pr_backup
);
498 static int xen_acpi_processor_resume(struct notifier_block
*nb
,
499 unsigned long action
, void *data
)
501 bitmap_zero(acpi_ids_done
, nr_acpi_bits
);
502 return xen_upload_processor_pm_data();
505 struct notifier_block xen_acpi_processor_resume_nb
= {
506 .notifier_call
= xen_acpi_processor_resume
,
509 static int __init
xen_acpi_processor_init(void)
512 int rc
= check_prereq();
517 nr_acpi_bits
= get_max_acpi_id() + 1;
518 acpi_ids_done
= kcalloc(BITS_TO_LONGS(nr_acpi_bits
), sizeof(unsigned long), GFP_KERNEL
);
522 acpi_perf_data
= alloc_percpu(struct acpi_processor_performance
);
523 if (!acpi_perf_data
) {
524 pr_debug("Memory allocation error for acpi_perf_data\n");
525 kfree(acpi_ids_done
);
528 for_each_possible_cpu(i
) {
529 if (!zalloc_cpumask_var_node(
530 &per_cpu_ptr(acpi_perf_data
, i
)->shared_cpu_map
,
531 GFP_KERNEL
, cpu_to_node(i
))) {
537 /* Do initialization in ACPI core. It is OK to fail here. */
538 (void)acpi_processor_preregister_performance(acpi_perf_data
);
540 for_each_possible_cpu(i
) {
541 struct acpi_processor
*pr
;
542 struct acpi_processor_performance
*perf
;
544 pr
= per_cpu(processors
, i
);
545 perf
= per_cpu_ptr(acpi_perf_data
, i
);
549 pr
->performance
= perf
;
550 rc
= acpi_processor_get_performance_info(pr
);
555 rc
= xen_upload_processor_pm_data();
559 xen_resume_notifier_register(&xen_acpi_processor_resume_nb
);
563 for_each_possible_cpu(i
)
564 acpi_processor_unregister_performance(i
);
567 /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
568 free_acpi_perf_data();
569 kfree(acpi_ids_done
);
572 static void __exit
xen_acpi_processor_exit(void)
576 xen_resume_notifier_unregister(&xen_acpi_processor_resume_nb
);
577 kfree(acpi_ids_done
);
578 kfree(acpi_id_present
);
579 kfree(acpi_id_cst_present
);
580 for_each_possible_cpu(i
)
581 acpi_processor_unregister_performance(i
);
583 free_acpi_perf_data();
586 MODULE_AUTHOR("Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>");
587 MODULE_DESCRIPTION("Xen ACPI Processor P-states (and Cx) driver which uploads PM data to Xen hypervisor");
588 MODULE_LICENSE("GPL");
590 /* We want to be loaded before the CPU freq scaling drivers are loaded.
591 * They are loaded in late_initcall. */
592 device_initcall(xen_acpi_processor_init
);
593 module_exit(xen_acpi_processor_exit
);