2 * Copyright (C) 2012, Analog Devices Inc.
3 * Author: Lars-Peter Clausen <lars@metafoo.de>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
10 * You should have received a copy of the GNU General Public License along
11 * with this program; if not, write to the Free Software Foundation, Inc.,
12 * 675 Mass Ave, Cambridge, MA 02139, USA.
15 #ifndef __SOUND_DMAENGINE_PCM_H__
16 #define __SOUND_DMAENGINE_PCM_H__
18 #include <sound/pcm.h>
19 #include <sound/soc.h>
20 #include <linux/dmaengine.h>
23 * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM
25 * @substream: PCM substream
27 static inline enum dma_transfer_direction
28 snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream
*substream
)
30 if (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
)
31 return DMA_MEM_TO_DEV
;
33 return DMA_DEV_TO_MEM
;
36 int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream
*substream
,
37 const struct snd_pcm_hw_params
*params
, struct dma_slave_config
*slave_config
);
38 int snd_dmaengine_pcm_trigger(struct snd_pcm_substream
*substream
, int cmd
);
39 snd_pcm_uframes_t
snd_dmaengine_pcm_pointer(struct snd_pcm_substream
*substream
);
40 snd_pcm_uframes_t
snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream
*substream
);
42 int snd_dmaengine_pcm_open(struct snd_pcm_substream
*substream
,
43 struct dma_chan
*chan
);
44 int snd_dmaengine_pcm_close(struct snd_pcm_substream
*substream
);
46 int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream
*substream
,
47 dma_filter_fn filter_fn
, void *filter_data
);
48 int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream
*substream
);
50 struct dma_chan
*snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn
,
52 struct dma_chan
*snd_dmaengine_pcm_get_chan(struct snd_pcm_substream
*substream
);
55 * struct snd_dmaengine_dai_dma_data - DAI DMA configuration data
56 * @addr: Address of the DAI data source or destination register.
57 * @addr_width: Width of the DAI data source or destination register.
58 * @maxburst: Maximum number of words(note: words, as in units of the
59 * src_addr_width member, not bytes) that can be send to or received from the
61 * @slave_id: Slave requester id for the DMA channel.
62 * @filter_data: Custom DMA channel filter data, this will usually be used when
63 * requesting the DMA channel.
64 * @chan_name: Custom channel name to use when requesting DMA channel.
65 * @fifo_size: FIFO size of the DAI controller in bytes
67 struct snd_dmaengine_dai_dma_data
{
69 enum dma_slave_buswidth addr_width
;
71 unsigned int slave_id
;
73 const char *chan_name
;
74 unsigned int fifo_size
;
77 void snd_dmaengine_pcm_set_config_from_dai_data(
78 const struct snd_pcm_substream
*substream
,
79 const struct snd_dmaengine_dai_dma_data
*dma_data
,
80 struct dma_slave_config
*config
);
84 * Try to request the DMA channel using compat_request_channel or
85 * compat_filter_fn if it couldn't be requested through devicetree.
87 #define SND_DMAENGINE_PCM_FLAG_COMPAT BIT(0)
89 * Don't try to request the DMA channels through devicetree. This flag only
90 * makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well.
92 #define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1)
94 * The PCM is half duplex and the DMA channel is shared between capture and
97 #define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3)
99 * The PCM streams have custom channel names specified.
101 #define SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME BIT(4)
104 * struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM
105 * @prepare_slave_config: Callback used to fill in the DMA slave_config for a
106 * PCM substream. Will be called from the PCM drivers hwparams callback.
107 * @compat_request_channel: Callback to request a DMA channel for platforms
108 * which do not use devicetree.
109 * @compat_filter_fn: Will be used as the filter function when requesting a
110 * channel for platforms which do not use devicetree. The filter parameter
111 * will be the DAI's DMA data.
112 * @dma_dev: If set, request DMA channel on this device rather than the DAI
114 * @chan_names: If set, these custom DMA channel names will be requested at
116 * @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
117 * @prealloc_buffer_size: Size of the preallocated audio buffer.
119 * Note: If both compat_request_channel and compat_filter_fn are set
120 * compat_request_channel will be used to request the channel and
121 * compat_filter_fn will be ignored. Otherwise the channel will be requested
122 * using dma_request_channel with compat_filter_fn as the filter function.
124 struct snd_dmaengine_pcm_config
{
125 int (*prepare_slave_config
)(struct snd_pcm_substream
*substream
,
126 struct snd_pcm_hw_params
*params
,
127 struct dma_slave_config
*slave_config
);
128 struct dma_chan
*(*compat_request_channel
)(
129 struct snd_soc_pcm_runtime
*rtd
,
130 struct snd_pcm_substream
*substream
);
131 dma_filter_fn compat_filter_fn
;
132 struct device
*dma_dev
;
133 const char *chan_names
[SNDRV_PCM_STREAM_LAST
+ 1];
135 const struct snd_pcm_hardware
*pcm_hardware
;
136 unsigned int prealloc_buffer_size
;
139 int snd_dmaengine_pcm_register(struct device
*dev
,
140 const struct snd_dmaengine_pcm_config
*config
,
142 void snd_dmaengine_pcm_unregister(struct device
*dev
);
144 int devm_snd_dmaengine_pcm_register(struct device
*dev
,
145 const struct snd_dmaengine_pcm_config
*config
,
148 int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream
*substream
,
149 struct snd_pcm_hw_params
*params
,
150 struct dma_slave_config
*slave_config
);