mfd: bcm590xx: Use devm_mfd_add_devices() for mfd_device registration
[linux/fpc-iii.git] / drivers / cpufreq / cppc_cpufreq.c
blob7c0bdfb1a2ca47ea9dcd0b36ef892274edd929b4
1 /*
2 * CPPC (Collaborative Processor Performance Control) driver for
3 * interfacing with the CPUfreq layer and governors. See
4 * cppc_acpi.c for CPPC specific methods.
6 * (C) Copyright 2014, 2015 Linaro Ltd.
7 * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; version 2
12 * of the License.
15 #define pr_fmt(fmt) "CPPC Cpufreq:" fmt
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/delay.h>
20 #include <linux/cpu.h>
21 #include <linux/cpufreq.h>
22 #include <linux/vmalloc.h>
24 #include <acpi/cppc_acpi.h>
27 * These structs contain information parsed from per CPU
28 * ACPI _CPC structures.
29 * e.g. For each CPU the highest, lowest supported
30 * performance capabilities, desired performance level
31 * requested etc.
33 static struct cpudata **all_cpu_data;
35 static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
36 unsigned int target_freq,
37 unsigned int relation)
39 struct cpudata *cpu;
40 struct cpufreq_freqs freqs;
41 int ret = 0;
43 cpu = all_cpu_data[policy->cpu];
45 cpu->perf_ctrls.desired_perf = target_freq;
46 freqs.old = policy->cur;
47 freqs.new = target_freq;
49 cpufreq_freq_transition_begin(policy, &freqs);
50 ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls);
51 cpufreq_freq_transition_end(policy, &freqs, ret != 0);
53 if (ret)
54 pr_debug("Failed to set target on CPU:%d. ret:%d\n",
55 cpu->cpu, ret);
57 return ret;
60 static int cppc_verify_policy(struct cpufreq_policy *policy)
62 cpufreq_verify_within_cpu_limits(policy);
63 return 0;
66 static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy)
68 int cpu_num = policy->cpu;
69 struct cpudata *cpu = all_cpu_data[cpu_num];
70 int ret;
72 cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf;
74 ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
75 if (ret)
76 pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
77 cpu->perf_caps.lowest_perf, cpu_num, ret);
80 static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
82 struct cpudata *cpu;
83 unsigned int cpu_num = policy->cpu;
84 int ret = 0;
86 cpu = all_cpu_data[policy->cpu];
88 cpu->cpu = cpu_num;
89 ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps);
91 if (ret) {
92 pr_debug("Err reading CPU%d perf capabilities. ret:%d\n",
93 cpu_num, ret);
94 return ret;
97 policy->min = cpu->perf_caps.lowest_perf;
98 policy->max = cpu->perf_caps.highest_perf;
99 policy->cpuinfo.min_freq = policy->min;
100 policy->cpuinfo.max_freq = policy->max;
101 policy->shared_type = cpu->shared_type;
103 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
104 cpumask_copy(policy->cpus, cpu->shared_cpu_map);
105 else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
106 /* Support only SW_ANY for now. */
107 pr_debug("Unsupported CPU co-ord type\n");
108 return -EFAULT;
111 cpumask_set_cpu(policy->cpu, policy->cpus);
112 cpu->cur_policy = policy;
114 /* Set policy->cur to max now. The governors will adjust later. */
115 policy->cur = cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf;
117 ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
118 if (ret)
119 pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
120 cpu->perf_caps.highest_perf, cpu_num, ret);
122 return ret;
125 static struct cpufreq_driver cppc_cpufreq_driver = {
126 .flags = CPUFREQ_CONST_LOOPS,
127 .verify = cppc_verify_policy,
128 .target = cppc_cpufreq_set_target,
129 .init = cppc_cpufreq_cpu_init,
130 .stop_cpu = cppc_cpufreq_stop_cpu,
131 .name = "cppc_cpufreq",
134 static int __init cppc_cpufreq_init(void)
136 int i, ret = 0;
137 struct cpudata *cpu;
139 if (acpi_disabled)
140 return -ENODEV;
142 all_cpu_data = kzalloc(sizeof(void *) * num_possible_cpus(), GFP_KERNEL);
143 if (!all_cpu_data)
144 return -ENOMEM;
146 for_each_possible_cpu(i) {
147 all_cpu_data[i] = kzalloc(sizeof(struct cpudata), GFP_KERNEL);
148 if (!all_cpu_data[i])
149 goto out;
151 cpu = all_cpu_data[i];
152 if (!zalloc_cpumask_var(&cpu->shared_cpu_map, GFP_KERNEL))
153 goto out;
156 ret = acpi_get_psd_map(all_cpu_data);
157 if (ret) {
158 pr_debug("Error parsing PSD data. Aborting cpufreq registration.\n");
159 goto out;
162 ret = cpufreq_register_driver(&cppc_cpufreq_driver);
163 if (ret)
164 goto out;
166 return ret;
168 out:
169 for_each_possible_cpu(i)
170 kfree(all_cpu_data[i]);
172 kfree(all_cpu_data);
173 return -ENODEV;
176 late_initcall(cppc_cpufreq_init);