watchdog: pic32-dmt: Remove .owner field for driver
[linux/fpc-iii.git] / drivers / input / keyboard / hilkbd.c
blob198dc07a1be52523b44c78a76074dc4806619f5e
1 /*
2 * linux/drivers/hil/hilkbd.c
4 * Copyright (C) 1998 Philip Blundell <philb@gnu.org>
5 * Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai>
6 * Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
8 * Very basic HP Human Interface Loop (HIL) driver.
9 * This driver handles the keyboard on HP300 (m68k) and on some
10 * HP700 (parisc) series machines.
13 * This file is subject to the terms and conditions of the GNU General Public
14 * License version 2. See the file COPYING in the main directory of this
15 * archive for more details.
18 #include <linux/pci_ids.h>
19 #include <linux/ioport.h>
20 #include <linux/module.h>
21 #include <linux/errno.h>
22 #include <linux/input.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/hil.h>
26 #include <linux/io.h>
27 #include <linux/sched.h>
28 #include <linux/spinlock.h>
29 #include <asm/irq.h>
30 #ifdef CONFIG_HP300
31 #include <asm/hwtest.h>
32 #endif
35 MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
36 MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
37 MODULE_LICENSE("GPL v2");
40 #if defined(CONFIG_PARISC)
42 #include <asm/io.h>
43 #include <asm/hardware.h>
44 #include <asm/parisc-device.h>
45 static unsigned long hil_base; /* HPA for the HIL device */
46 static unsigned int hil_irq;
47 #define HILBASE hil_base /* HPPA (parisc) port address */
48 #define HIL_DATA 0x800
49 #define HIL_CMD 0x801
50 #define HIL_IRQ hil_irq
51 #define hil_readb(p) gsc_readb(p)
52 #define hil_writeb(v,p) gsc_writeb((v),(p))
54 #elif defined(CONFIG_HP300)
56 #define HILBASE 0xf0428000UL /* HP300 (m68k) port address */
57 #define HIL_DATA 0x1
58 #define HIL_CMD 0x3
59 #define HIL_IRQ 2
60 #define hil_readb(p) readb(p)
61 #define hil_writeb(v,p) writeb((v),(p))
63 #else
64 #error "HIL is not supported on this platform"
65 #endif
69 /* HIL helper functions */
71 #define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
72 #define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
73 #define hil_status() (hil_readb(HILBASE + HIL_CMD))
74 #define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
75 #define hil_read_data() (hil_readb(HILBASE + HIL_DATA))
76 #define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
78 /* HIL constants */
80 #define HIL_BUSY 0x02
81 #define HIL_DATA_RDY 0x01
83 #define HIL_SETARD 0xA0 /* set auto-repeat delay */
84 #define HIL_SETARR 0xA2 /* set auto-repeat rate */
85 #define HIL_SETTONE 0xA3 /* set tone generator */
86 #define HIL_CNMT 0xB2 /* clear nmi */
87 #define HIL_INTON 0x5C /* Turn on interrupts. */
88 #define HIL_INTOFF 0x5D /* Turn off interrupts. */
90 #define HIL_READKBDSADR 0xF9
91 #define HIL_WRITEKBDSADR 0xE9
93 static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
94 { HIL_KEYCODES_SET1 };
96 /* HIL structure */
97 static struct {
98 struct input_dev *dev;
100 unsigned int curdev;
102 unsigned char s;
103 unsigned char c;
104 int valid;
106 unsigned char data[16];
107 unsigned int ptr;
108 spinlock_t lock;
110 void *dev_id; /* native bus device */
111 } hil_dev;
114 static void poll_finished(void)
116 int down;
117 int key;
118 unsigned char scode;
120 switch (hil_dev.data[0]) {
121 case 0x40:
122 down = (hil_dev.data[1] & 1) == 0;
123 scode = hil_dev.data[1] >> 1;
124 key = hphilkeyb_keycode[scode];
125 input_report_key(hil_dev.dev, key, down);
126 break;
128 hil_dev.curdev = 0;
132 static inline void handle_status(unsigned char s, unsigned char c)
134 if (c & 0x8) {
135 /* End of block */
136 if (c & 0x10)
137 poll_finished();
138 } else {
139 if (c & 0x10) {
140 if (hil_dev.curdev)
141 poll_finished(); /* just in case */
142 hil_dev.curdev = c & 7;
143 hil_dev.ptr = 0;
149 static inline void handle_data(unsigned char s, unsigned char c)
151 if (hil_dev.curdev) {
152 hil_dev.data[hil_dev.ptr++] = c;
153 hil_dev.ptr &= 15;
158 /* handle HIL interrupts */
159 static irqreturn_t hil_interrupt(int irq, void *handle)
161 unsigned char s, c;
163 s = hil_status();
164 c = hil_read_data();
166 switch (s >> 4) {
167 case 0x5:
168 handle_status(s, c);
169 break;
170 case 0x6:
171 handle_data(s, c);
172 break;
173 case 0x4:
174 hil_dev.s = s;
175 hil_dev.c = c;
176 mb();
177 hil_dev.valid = 1;
178 break;
180 return IRQ_HANDLED;
184 /* send a command to the HIL */
185 static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
187 unsigned long flags;
189 spin_lock_irqsave(&hil_dev.lock, flags);
190 while (hil_busy())
191 /* wait */;
192 hil_command(cmd);
193 while (len--) {
194 while (hil_busy())
195 /* wait */;
196 hil_write_data(*(data++));
198 spin_unlock_irqrestore(&hil_dev.lock, flags);
202 /* initialize HIL */
203 static int hil_keyb_init(void)
205 unsigned char c;
206 unsigned int i, kbid;
207 wait_queue_head_t hil_wait;
208 int err;
210 if (hil_dev.dev)
211 return -ENODEV; /* already initialized */
213 init_waitqueue_head(&hil_wait);
214 spin_lock_init(&hil_dev.lock);
216 hil_dev.dev = input_allocate_device();
217 if (!hil_dev.dev)
218 return -ENOMEM;
220 err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
221 if (err) {
222 printk(KERN_ERR "HIL: Can't get IRQ\n");
223 goto err1;
226 /* Turn on interrupts */
227 hil_do(HIL_INTON, NULL, 0);
229 /* Look for keyboards */
230 hil_dev.valid = 0; /* clear any pending data */
231 hil_do(HIL_READKBDSADR, NULL, 0);
233 wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
234 if (!hil_dev.valid)
235 printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
237 c = hil_dev.c;
238 hil_dev.valid = 0;
239 if (c == 0) {
240 kbid = -1;
241 printk(KERN_WARNING "HIL: no keyboard present\n");
242 } else {
243 kbid = ffz(~c);
244 printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
247 /* set it to raw mode */
248 c = 0;
249 hil_do(HIL_WRITEKBDSADR, &c, 1);
251 for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
252 if (hphilkeyb_keycode[i] != KEY_RESERVED)
253 __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
255 hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
256 hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
257 BIT_MASK(LED_SCROLLL);
258 hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
259 hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
260 hil_dev.dev->keycode = hphilkeyb_keycode;
261 hil_dev.dev->name = "HIL keyboard";
262 hil_dev.dev->phys = "hpkbd/input0";
264 hil_dev.dev->id.bustype = BUS_HIL;
265 hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP;
266 hil_dev.dev->id.product = 0x0001;
267 hil_dev.dev->id.version = 0x0010;
269 err = input_register_device(hil_dev.dev);
270 if (err) {
271 printk(KERN_ERR "HIL: Can't register device\n");
272 goto err2;
275 printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
276 hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
278 return 0;
280 err2:
281 hil_do(HIL_INTOFF, NULL, 0);
282 free_irq(HIL_IRQ, hil_dev.dev_id);
283 err1:
284 input_free_device(hil_dev.dev);
285 hil_dev.dev = NULL;
286 return err;
289 static void hil_keyb_exit(void)
291 if (HIL_IRQ)
292 free_irq(HIL_IRQ, hil_dev.dev_id);
294 /* Turn off interrupts */
295 hil_do(HIL_INTOFF, NULL, 0);
297 input_unregister_device(hil_dev.dev);
298 hil_dev.dev = NULL;
301 #if defined(CONFIG_PARISC)
302 static int hil_probe_chip(struct parisc_device *dev)
304 /* Only allow one HIL keyboard */
305 if (hil_dev.dev)
306 return -ENODEV;
308 if (!dev->irq) {
309 printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
310 (void *)dev->hpa.start);
311 return -ENODEV;
314 hil_base = dev->hpa.start;
315 hil_irq = dev->irq;
316 hil_dev.dev_id = dev;
318 printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
320 return hil_keyb_init();
323 static int hil_remove_chip(struct parisc_device *dev)
325 hil_keyb_exit();
327 return 0;
330 static struct parisc_device_id hil_tbl[] = {
331 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
332 { 0, }
335 #if 0
336 /* Disabled to avoid conflicts with the HP SDC HIL drivers */
337 MODULE_DEVICE_TABLE(parisc, hil_tbl);
338 #endif
340 static struct parisc_driver hil_driver = {
341 .name = "hil",
342 .id_table = hil_tbl,
343 .probe = hil_probe_chip,
344 .remove = hil_remove_chip,
347 static int __init hil_init(void)
349 return register_parisc_driver(&hil_driver);
352 static void __exit hil_exit(void)
354 unregister_parisc_driver(&hil_driver);
357 #else /* !CONFIG_PARISC */
359 static int __init hil_init(void)
361 int error;
363 /* Only allow one HIL keyboard */
364 if (hil_dev.dev)
365 return -EBUSY;
367 if (!MACH_IS_HP300)
368 return -ENODEV;
370 if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
371 printk(KERN_ERR "HIL: hardware register was not found\n");
372 return -ENODEV;
375 if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
376 printk(KERN_ERR "HIL: IOPORT region already used\n");
377 return -EIO;
380 error = hil_keyb_init();
381 if (error) {
382 release_region(HILBASE + HIL_DATA, 2);
383 return error;
386 return 0;
389 static void __exit hil_exit(void)
391 hil_keyb_exit();
392 release_region(HILBASE + HIL_DATA, 2);
395 #endif /* CONFIG_PARISC */
397 module_init(hil_init);
398 module_exit(hil_exit);