1 /* SPDX-License-Identifier: GPL-2.0
3 * IO cost model based controller.
5 * Copyright (C) 2019 Tejun Heo <tj@kernel.org>
6 * Copyright (C) 2019 Andy Newell <newella@fb.com>
7 * Copyright (C) 2019 Facebook
9 * One challenge of controlling IO resources is the lack of trivially
10 * observable cost metric. This is distinguished from CPU and memory where
11 * wallclock time and the number of bytes can serve as accurate enough
14 * Bandwidth and iops are the most commonly used metrics for IO devices but
15 * depending on the type and specifics of the device, different IO patterns
16 * easily lead to multiple orders of magnitude variations rendering them
17 * useless for the purpose of IO capacity distribution. While on-device
18 * time, with a lot of clutches, could serve as a useful approximation for
19 * non-queued rotational devices, this is no longer viable with modern
20 * devices, even the rotational ones.
22 * While there is no cost metric we can trivially observe, it isn't a
23 * complete mystery. For example, on a rotational device, seek cost
24 * dominates while a contiguous transfer contributes a smaller amount
25 * proportional to the size. If we can characterize at least the relative
26 * costs of these different types of IOs, it should be possible to
27 * implement a reasonable work-conserving proportional IO resource
32 * IO cost model estimates the cost of an IO given its basic parameters and
33 * history (e.g. the end sector of the last IO). The cost is measured in
34 * device time. If a given IO is estimated to cost 10ms, the device should
35 * be able to process ~100 of those IOs in a second.
37 * Currently, there's only one builtin cost model - linear. Each IO is
38 * classified as sequential or random and given a base cost accordingly.
39 * On top of that, a size cost proportional to the length of the IO is
40 * added. While simple, this model captures the operational
41 * characteristics of a wide varienty of devices well enough. Default
42 * paramters for several different classes of devices are provided and the
43 * parameters can be configured from userspace via
44 * /sys/fs/cgroup/io.cost.model.
46 * If needed, tools/cgroup/iocost_coef_gen.py can be used to generate
47 * device-specific coefficients.
49 * If needed, tools/cgroup/iocost_coef_gen.py can be used to generate
50 * device-specific coefficients.
54 * The device virtual time (vtime) is used as the primary control metric.
55 * The control strategy is composed of the following three parts.
57 * 2-1. Vtime Distribution
59 * When a cgroup becomes active in terms of IOs, its hierarchical share is
60 * calculated. Please consider the following hierarchy where the numbers
61 * inside parentheses denote the configured weights.
67 * A0 (w:100) A1 (w:100)
69 * If B is idle and only A0 and A1 are actively issuing IOs, as the two are
70 * of equal weight, each gets 50% share. If then B starts issuing IOs, B
71 * gets 300/(100+300) or 75% share, and A0 and A1 equally splits the rest,
72 * 12.5% each. The distribution mechanism only cares about these flattened
73 * shares. They're called hweights (hierarchical weights) and always add
74 * upto 1 (HWEIGHT_WHOLE).
76 * A given cgroup's vtime runs slower in inverse proportion to its hweight.
77 * For example, with 12.5% weight, A0's time runs 8 times slower (100/12.5)
78 * against the device vtime - an IO which takes 10ms on the underlying
79 * device is considered to take 80ms on A0.
81 * This constitutes the basis of IO capacity distribution. Each cgroup's
82 * vtime is running at a rate determined by its hweight. A cgroup tracks
83 * the vtime consumed by past IOs and can issue a new IO iff doing so
84 * wouldn't outrun the current device vtime. Otherwise, the IO is
85 * suspended until the vtime has progressed enough to cover it.
87 * 2-2. Vrate Adjustment
89 * It's unrealistic to expect the cost model to be perfect. There are too
90 * many devices and even on the same device the overall performance
91 * fluctuates depending on numerous factors such as IO mixture and device
92 * internal garbage collection. The controller needs to adapt dynamically.
94 * This is achieved by adjusting the overall IO rate according to how busy
95 * the device is. If the device becomes overloaded, we're sending down too
96 * many IOs and should generally slow down. If there are waiting issuers
97 * but the device isn't saturated, we're issuing too few and should
100 * To slow down, we lower the vrate - the rate at which the device vtime
101 * passes compared to the wall clock. For example, if the vtime is running
102 * at the vrate of 75%, all cgroups added up would only be able to issue
103 * 750ms worth of IOs per second, and vice-versa for speeding up.
105 * Device business is determined using two criteria - rq wait and
106 * completion latencies.
108 * When a device gets saturated, the on-device and then the request queues
109 * fill up and a bio which is ready to be issued has to wait for a request
110 * to become available. When this delay becomes noticeable, it's a clear
111 * indication that the device is saturated and we lower the vrate. This
112 * saturation signal is fairly conservative as it only triggers when both
113 * hardware and software queues are filled up, and is used as the default
116 * As devices can have deep queues and be unfair in how the queued commands
117 * are executed, soley depending on rq wait may not result in satisfactory
118 * control quality. For a better control quality, completion latency QoS
119 * parameters can be configured so that the device is considered saturated
120 * if N'th percentile completion latency rises above the set point.
122 * The completion latency requirements are a function of both the
123 * underlying device characteristics and the desired IO latency quality of
124 * service. There is an inherent trade-off - the tighter the latency QoS,
125 * the higher the bandwidth lossage. Latency QoS is disabled by default
126 * and can be set through /sys/fs/cgroup/io.cost.qos.
128 * 2-3. Work Conservation
130 * Imagine two cgroups A and B with equal weights. A is issuing a small IO
131 * periodically while B is sending out enough parallel IOs to saturate the
132 * device on its own. Let's say A's usage amounts to 100ms worth of IO
133 * cost per second, i.e., 10% of the device capacity. The naive
134 * distribution of half and half would lead to 60% utilization of the
135 * device, a significant reduction in the total amount of work done
136 * compared to free-for-all competition. This is too high a cost to pay
139 * To conserve the total amount of work done, we keep track of how much
140 * each active cgroup is actually using and yield part of its weight if
141 * there are other cgroups which can make use of it. In the above case,
142 * A's weight will be lowered so that it hovers above the actual usage and
143 * B would be able to use the rest.
145 * As we don't want to penalize a cgroup for donating its weight, the
146 * surplus weight adjustment factors in a margin and has an immediate
147 * snapback mechanism in case the cgroup needs more IO vtime for itself.
149 * Note that adjusting down surplus weights has the same effects as
150 * accelerating vtime for other cgroups and work conservation can also be
151 * implemented by adjusting vrate dynamically. However, squaring who can
152 * donate and should take back how much requires hweight propagations
153 * anyway making it easier to implement and understand as a separate
158 * Instead of debugfs or other clumsy monitoring mechanisms, this
159 * controller uses a drgn based monitoring script -
160 * tools/cgroup/iocost_monitor.py. For details on drgn, please see
161 * https://github.com/osandov/drgn. The ouput looks like the following.
163 * sdb RUN per=300ms cur_per=234.218:v203.695 busy= +1 vrate= 62.12%
164 * active weight hweight% inflt% dbt delay usages%
165 * test/a * 50/ 50 33.33/ 33.33 27.65 2 0*041 033:033:033
166 * test/b * 100/ 100 66.67/ 66.67 17.56 0 0*000 066:079:077
168 * - per : Timer period
169 * - cur_per : Internal wall and device vtime clock
170 * - vrate : Device virtual time rate against wall clock
171 * - weight : Surplus-adjusted and configured weights
172 * - hweight : Surplus-adjusted and configured hierarchical weights
173 * - inflt : The percentage of in-flight IO cost at the end of last period
174 * - del_ms : Deferred issuer delay induction level and duration
175 * - usages : Usage history
178 #include <linux/kernel.h>
179 #include <linux/module.h>
180 #include <linux/timer.h>
181 #include <linux/time64.h>
182 #include <linux/parser.h>
183 #include <linux/sched/signal.h>
184 #include <linux/blk-cgroup.h>
185 #include "blk-rq-qos.h"
186 #include "blk-stat.h"
189 #ifdef CONFIG_TRACEPOINTS
191 /* copied from TRACE_CGROUP_PATH, see cgroup-internal.h */
192 #define TRACE_IOCG_PATH_LEN 1024
193 static DEFINE_SPINLOCK(trace_iocg_path_lock
);
194 static char trace_iocg_path
[TRACE_IOCG_PATH_LEN
];
196 #define TRACE_IOCG_PATH(type, iocg, ...) \
198 unsigned long flags; \
199 if (trace_iocost_##type##_enabled()) { \
200 spin_lock_irqsave(&trace_iocg_path_lock, flags); \
201 cgroup_path(iocg_to_blkg(iocg)->blkcg->css.cgroup, \
202 trace_iocg_path, TRACE_IOCG_PATH_LEN); \
203 trace_iocost_##type(iocg, trace_iocg_path, \
205 spin_unlock_irqrestore(&trace_iocg_path_lock, flags); \
209 #else /* CONFIG_TRACE_POINTS */
210 #define TRACE_IOCG_PATH(type, iocg, ...) do { } while (0)
211 #endif /* CONFIG_TRACE_POINTS */
216 /* timer period is calculated from latency requirements, bound it */
217 MIN_PERIOD
= USEC_PER_MSEC
,
218 MAX_PERIOD
= USEC_PER_SEC
,
221 * A cgroup's vtime can run 50% behind the device vtime, which
222 * serves as its IO credit buffer. Surplus weight adjustment is
223 * immediately canceled if the vtime margin runs below 10%.
226 INUSE_MARGIN_PCT
= 10,
228 /* Have some play in waitq timer operations */
229 WAITQ_TIMER_MARGIN_PCT
= 5,
232 * vtime can wrap well within a reasonable uptime when vrate is
233 * consistently raised. Don't trust recorded cgroup vtime if the
234 * period counter indicates that it's older than 5mins.
236 VTIME_VALID_DUR
= 300 * USEC_PER_SEC
,
239 * Remember the past three non-zero usages and use the max for
240 * surplus calculation. Three slots guarantee that we remember one
241 * full period usage from the last active stretch even after
242 * partial deactivation and re-activation periods. Don't start
243 * giving away weight before collecting two data points to prevent
244 * hweight adjustments based on one partial activation period.
247 MIN_VALID_USAGES
= 2,
249 /* 1/64k is granular enough and can easily be handled w/ u32 */
250 HWEIGHT_WHOLE
= 1 << 16,
253 * As vtime is used to calculate the cost of each IO, it needs to
254 * be fairly high precision. For example, it should be able to
255 * represent the cost of a single page worth of discard with
256 * suffificient accuracy. At the same time, it should be able to
257 * represent reasonably long enough durations to be useful and
258 * convenient during operation.
260 * 1s worth of vtime is 2^37. This gives us both sub-nanosecond
261 * granularity and days of wrap-around time even at extreme vrates.
263 VTIME_PER_SEC_SHIFT
= 37,
264 VTIME_PER_SEC
= 1LLU << VTIME_PER_SEC_SHIFT
,
265 VTIME_PER_USEC
= VTIME_PER_SEC
/ USEC_PER_SEC
,
267 /* bound vrate adjustments within two orders of magnitude */
268 VRATE_MIN_PPM
= 10000, /* 1% */
269 VRATE_MAX_PPM
= 100000000, /* 10000% */
271 VRATE_MIN
= VTIME_PER_USEC
* VRATE_MIN_PPM
/ MILLION
,
272 VRATE_CLAMP_ADJ_PCT
= 4,
274 /* if IOs end up waiting for requests, issue less */
275 RQ_WAIT_BUSY_PCT
= 5,
277 /* unbusy hysterisis */
280 /* don't let cmds which take a very long time pin lagging for too long */
281 MAX_LAGGING_PERIODS
= 10,
284 * If usage% * 1.25 + 2% is lower than hweight% by more than 3%,
285 * donate the surplus.
287 SURPLUS_SCALE_PCT
= 125, /* * 125% */
288 SURPLUS_SCALE_ABS
= HWEIGHT_WHOLE
/ 50, /* + 2% */
289 SURPLUS_MIN_ADJ_DELTA
= HWEIGHT_WHOLE
/ 33, /* 3% */
291 /* switch iff the conditions are met for longer than this */
292 AUTOP_CYCLE_NSEC
= 10LLU * NSEC_PER_SEC
,
295 * Count IO size in 4k pages. The 12bit shift helps keeping
296 * size-proportional components of cost calculation in closer
297 * numbers of digits to per-IO cost components.
300 IOC_PAGE_SIZE
= 1 << IOC_PAGE_SHIFT
,
301 IOC_SECT_TO_PAGE_SHIFT
= IOC_PAGE_SHIFT
- SECTOR_SHIFT
,
303 /* if apart further than 16M, consider randio for linear model */
304 LCOEF_RANDIO_PAGES
= 4096,
313 /* io.cost.qos controls including per-dev enable of the whole controller */
320 /* io.cost.qos params */
331 /* io.cost.model controls */
338 /* builtin linear cost model coefficients */
370 u32 qos
[NR_QOS_PARAMS
];
371 u64 i_lcoefs
[NR_I_LCOEFS
];
372 u64 lcoefs
[NR_LCOEFS
];
373 u32 too_fast_vrate_pct
;
374 u32 too_slow_vrate_pct
;
384 struct ioc_pcpu_stat
{
385 struct ioc_missed missed
[2];
397 struct ioc_params params
;
404 struct timer_list timer
;
405 struct list_head active_iocgs
; /* active cgroups */
406 struct ioc_pcpu_stat __percpu
*pcpu_stat
;
408 enum ioc_running running
;
409 atomic64_t vtime_rate
;
411 seqcount_t period_seqcount
;
412 u32 period_at
; /* wallclock starttime */
413 u64 period_at_vtime
; /* vtime starttime */
415 atomic64_t cur_period
; /* inc'd each period */
416 int busy_level
; /* saturation history */
418 u64 inuse_margin_vtime
;
419 bool weights_updated
;
420 atomic_t hweight_gen
; /* for lazy hweights */
422 u64 autop_too_fast_at
;
423 u64 autop_too_slow_at
;
425 bool user_qos_params
:1;
426 bool user_cost_model
:1;
429 /* per device-cgroup pair */
431 struct blkg_policy_data pd
;
435 * A iocg can get its weight from two sources - an explicit
436 * per-device-cgroup configuration or the default weight of the
437 * cgroup. `cfg_weight` is the explicit per-device-cgroup
438 * configuration. `weight` is the effective considering both
441 * When an idle cgroup becomes active its `active` goes from 0 to
442 * `weight`. `inuse` is the surplus adjusted active weight.
443 * `active` and `inuse` are used to calculate `hweight_active` and
446 * `last_inuse` remembers `inuse` while an iocg is idle to persist
447 * surplus adjustments.
455 sector_t cursor
; /* to detect randio */
458 * `vtime` is this iocg's vtime cursor which progresses as IOs are
459 * issued. If lagging behind device vtime, the delta represents
460 * the currently available IO budget. If runnning ahead, the
463 * `vtime_done` is the same but progressed on completion rather
464 * than issue. The delta behind `vtime` represents the cost of
465 * currently in-flight IOs.
467 * `last_vtime` is used to remember `vtime` at the end of the last
468 * period to calculate utilization.
471 atomic64_t done_vtime
;
472 atomic64_t abs_vdebt
;
476 * The period this iocg was last active in. Used for deactivation
477 * and invalidating `vtime`.
479 atomic64_t active_period
;
480 struct list_head active_list
;
482 /* see __propagate_active_weight() and current_hweight() for details */
483 u64 child_active_sum
;
490 struct wait_queue_head waitq
;
491 struct hrtimer waitq_timer
;
492 struct hrtimer delay_timer
;
494 /* usage is recorded as fractions of HWEIGHT_WHOLE */
496 u32 usages
[NR_USAGE_SLOTS
];
498 /* this iocg's depth in the hierarchy and ancestors including self */
500 struct ioc_gq
*ancestors
[];
505 struct blkcg_policy_data cpd
;
506 unsigned int dfl_weight
;
517 struct wait_queue_entry wait
;
523 struct iocg_wake_ctx
{
529 static const struct ioc_params autop
[] = {
532 [QOS_RLAT
] = 250000, /* 250ms */
534 [QOS_MIN
] = VRATE_MIN_PPM
,
535 [QOS_MAX
] = VRATE_MAX_PPM
,
538 [I_LCOEF_RBPS
] = 174019176,
539 [I_LCOEF_RSEQIOPS
] = 41708,
540 [I_LCOEF_RRANDIOPS
] = 370,
541 [I_LCOEF_WBPS
] = 178075866,
542 [I_LCOEF_WSEQIOPS
] = 42705,
543 [I_LCOEF_WRANDIOPS
] = 378,
548 [QOS_RLAT
] = 25000, /* 25ms */
550 [QOS_MIN
] = VRATE_MIN_PPM
,
551 [QOS_MAX
] = VRATE_MAX_PPM
,
554 [I_LCOEF_RBPS
] = 245855193,
555 [I_LCOEF_RSEQIOPS
] = 61575,
556 [I_LCOEF_RRANDIOPS
] = 6946,
557 [I_LCOEF_WBPS
] = 141365009,
558 [I_LCOEF_WSEQIOPS
] = 33716,
559 [I_LCOEF_WRANDIOPS
] = 26796,
564 [QOS_RLAT
] = 25000, /* 25ms */
566 [QOS_MIN
] = VRATE_MIN_PPM
,
567 [QOS_MAX
] = VRATE_MAX_PPM
,
570 [I_LCOEF_RBPS
] = 488636629,
571 [I_LCOEF_RSEQIOPS
] = 8932,
572 [I_LCOEF_RRANDIOPS
] = 8518,
573 [I_LCOEF_WBPS
] = 427891549,
574 [I_LCOEF_WSEQIOPS
] = 28755,
575 [I_LCOEF_WRANDIOPS
] = 21940,
577 .too_fast_vrate_pct
= 500,
581 [QOS_RLAT
] = 5000, /* 5ms */
583 [QOS_MIN
] = VRATE_MIN_PPM
,
584 [QOS_MAX
] = VRATE_MAX_PPM
,
587 [I_LCOEF_RBPS
] = 3102524156LLU,
588 [I_LCOEF_RSEQIOPS
] = 724816,
589 [I_LCOEF_RRANDIOPS
] = 778122,
590 [I_LCOEF_WBPS
] = 1742780862LLU,
591 [I_LCOEF_WSEQIOPS
] = 425702,
592 [I_LCOEF_WRANDIOPS
] = 443193,
594 .too_slow_vrate_pct
= 10,
599 * vrate adjust percentages indexed by ioc->busy_level. We adjust up on
600 * vtime credit shortage and down on device saturation.
602 static u32 vrate_adj_pct
[] =
604 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
605 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
606 4, 4, 4, 4, 4, 4, 4, 4, 8, 8, 8, 8, 8, 8, 8, 8, 16 };
608 static struct blkcg_policy blkcg_policy_iocost
;
610 /* accessors and helpers */
611 static struct ioc
*rqos_to_ioc(struct rq_qos
*rqos
)
613 return container_of(rqos
, struct ioc
, rqos
);
616 static struct ioc
*q_to_ioc(struct request_queue
*q
)
618 return rqos_to_ioc(rq_qos_id(q
, RQ_QOS_COST
));
621 static const char *q_name(struct request_queue
*q
)
623 if (test_bit(QUEUE_FLAG_REGISTERED
, &q
->queue_flags
))
624 return kobject_name(q
->kobj
.parent
);
629 static const char __maybe_unused
*ioc_name(struct ioc
*ioc
)
631 return q_name(ioc
->rqos
.q
);
634 static struct ioc_gq
*pd_to_iocg(struct blkg_policy_data
*pd
)
636 return pd
? container_of(pd
, struct ioc_gq
, pd
) : NULL
;
639 static struct ioc_gq
*blkg_to_iocg(struct blkcg_gq
*blkg
)
641 return pd_to_iocg(blkg_to_pd(blkg
, &blkcg_policy_iocost
));
644 static struct blkcg_gq
*iocg_to_blkg(struct ioc_gq
*iocg
)
646 return pd_to_blkg(&iocg
->pd
);
649 static struct ioc_cgrp
*blkcg_to_iocc(struct blkcg
*blkcg
)
651 return container_of(blkcg_to_cpd(blkcg
, &blkcg_policy_iocost
),
652 struct ioc_cgrp
, cpd
);
656 * Scale @abs_cost to the inverse of @hw_inuse. The lower the hierarchical
657 * weight, the more expensive each IO. Must round up.
659 static u64
abs_cost_to_cost(u64 abs_cost
, u32 hw_inuse
)
661 return DIV64_U64_ROUND_UP(abs_cost
* HWEIGHT_WHOLE
, hw_inuse
);
665 * The inverse of abs_cost_to_cost(). Must round up.
667 static u64
cost_to_abs_cost(u64 cost
, u32 hw_inuse
)
669 return DIV64_U64_ROUND_UP(cost
* hw_inuse
, HWEIGHT_WHOLE
);
672 static void iocg_commit_bio(struct ioc_gq
*iocg
, struct bio
*bio
, u64 cost
)
674 bio
->bi_iocost_cost
= cost
;
675 atomic64_add(cost
, &iocg
->vtime
);
678 #define CREATE_TRACE_POINTS
679 #include <trace/events/iocost.h>
681 /* latency Qos params changed, update period_us and all the dependent params */
682 static void ioc_refresh_period_us(struct ioc
*ioc
)
684 u32 ppm
, lat
, multi
, period_us
;
686 lockdep_assert_held(&ioc
->lock
);
688 /* pick the higher latency target */
689 if (ioc
->params
.qos
[QOS_RLAT
] >= ioc
->params
.qos
[QOS_WLAT
]) {
690 ppm
= ioc
->params
.qos
[QOS_RPPM
];
691 lat
= ioc
->params
.qos
[QOS_RLAT
];
693 ppm
= ioc
->params
.qos
[QOS_WPPM
];
694 lat
= ioc
->params
.qos
[QOS_WLAT
];
698 * We want the period to be long enough to contain a healthy number
699 * of IOs while short enough for granular control. Define it as a
700 * multiple of the latency target. Ideally, the multiplier should
701 * be scaled according to the percentile so that it would nominally
702 * contain a certain number of requests. Let's be simpler and
703 * scale it linearly so that it's 2x >= pct(90) and 10x at pct(50).
706 multi
= max_t(u32
, (MILLION
- ppm
) / 50000, 2);
709 period_us
= multi
* lat
;
710 period_us
= clamp_t(u32
, period_us
, MIN_PERIOD
, MAX_PERIOD
);
712 /* calculate dependent params */
713 ioc
->period_us
= period_us
;
714 ioc
->margin_us
= period_us
* MARGIN_PCT
/ 100;
715 ioc
->inuse_margin_vtime
= DIV64_U64_ROUND_UP(
716 period_us
* VTIME_PER_USEC
* INUSE_MARGIN_PCT
, 100);
719 static int ioc_autop_idx(struct ioc
*ioc
)
721 int idx
= ioc
->autop_idx
;
722 const struct ioc_params
*p
= &autop
[idx
];
727 if (!blk_queue_nonrot(ioc
->rqos
.q
))
730 /* handle SATA SSDs w/ broken NCQ */
731 if (blk_queue_depth(ioc
->rqos
.q
) == 1)
732 return AUTOP_SSD_QD1
;
734 /* use one of the normal ssd sets */
735 if (idx
< AUTOP_SSD_DFL
)
736 return AUTOP_SSD_DFL
;
738 /* if user is overriding anything, maintain what was there */
739 if (ioc
->user_qos_params
|| ioc
->user_cost_model
)
742 /* step up/down based on the vrate */
743 vrate_pct
= div64_u64(atomic64_read(&ioc
->vtime_rate
) * 100,
745 now_ns
= ktime_get_ns();
747 if (p
->too_fast_vrate_pct
&& p
->too_fast_vrate_pct
<= vrate_pct
) {
748 if (!ioc
->autop_too_fast_at
)
749 ioc
->autop_too_fast_at
= now_ns
;
750 if (now_ns
- ioc
->autop_too_fast_at
>= AUTOP_CYCLE_NSEC
)
753 ioc
->autop_too_fast_at
= 0;
756 if (p
->too_slow_vrate_pct
&& p
->too_slow_vrate_pct
>= vrate_pct
) {
757 if (!ioc
->autop_too_slow_at
)
758 ioc
->autop_too_slow_at
= now_ns
;
759 if (now_ns
- ioc
->autop_too_slow_at
>= AUTOP_CYCLE_NSEC
)
762 ioc
->autop_too_slow_at
= 0;
769 * Take the followings as input
771 * @bps maximum sequential throughput
772 * @seqiops maximum sequential 4k iops
773 * @randiops maximum random 4k iops
775 * and calculate the linear model cost coefficients.
777 * *@page per-page cost 1s / (@bps / 4096)
778 * *@seqio base cost of a seq IO max((1s / @seqiops) - *@page, 0)
779 * @randiops base cost of a rand IO max((1s / @randiops) - *@page, 0)
781 static void calc_lcoefs(u64 bps
, u64 seqiops
, u64 randiops
,
782 u64
*page
, u64
*seqio
, u64
*randio
)
786 *page
= *seqio
= *randio
= 0;
789 *page
= DIV64_U64_ROUND_UP(VTIME_PER_SEC
,
790 DIV_ROUND_UP_ULL(bps
, IOC_PAGE_SIZE
));
793 v
= DIV64_U64_ROUND_UP(VTIME_PER_SEC
, seqiops
);
799 v
= DIV64_U64_ROUND_UP(VTIME_PER_SEC
, randiops
);
805 static void ioc_refresh_lcoefs(struct ioc
*ioc
)
807 u64
*u
= ioc
->params
.i_lcoefs
;
808 u64
*c
= ioc
->params
.lcoefs
;
810 calc_lcoefs(u
[I_LCOEF_RBPS
], u
[I_LCOEF_RSEQIOPS
], u
[I_LCOEF_RRANDIOPS
],
811 &c
[LCOEF_RPAGE
], &c
[LCOEF_RSEQIO
], &c
[LCOEF_RRANDIO
]);
812 calc_lcoefs(u
[I_LCOEF_WBPS
], u
[I_LCOEF_WSEQIOPS
], u
[I_LCOEF_WRANDIOPS
],
813 &c
[LCOEF_WPAGE
], &c
[LCOEF_WSEQIO
], &c
[LCOEF_WRANDIO
]);
816 static bool ioc_refresh_params(struct ioc
*ioc
, bool force
)
818 const struct ioc_params
*p
;
821 lockdep_assert_held(&ioc
->lock
);
823 idx
= ioc_autop_idx(ioc
);
826 if (idx
== ioc
->autop_idx
&& !force
)
829 if (idx
!= ioc
->autop_idx
)
830 atomic64_set(&ioc
->vtime_rate
, VTIME_PER_USEC
);
832 ioc
->autop_idx
= idx
;
833 ioc
->autop_too_fast_at
= 0;
834 ioc
->autop_too_slow_at
= 0;
836 if (!ioc
->user_qos_params
)
837 memcpy(ioc
->params
.qos
, p
->qos
, sizeof(p
->qos
));
838 if (!ioc
->user_cost_model
)
839 memcpy(ioc
->params
.i_lcoefs
, p
->i_lcoefs
, sizeof(p
->i_lcoefs
));
841 ioc_refresh_period_us(ioc
);
842 ioc_refresh_lcoefs(ioc
);
844 ioc
->vrate_min
= DIV64_U64_ROUND_UP((u64
)ioc
->params
.qos
[QOS_MIN
] *
845 VTIME_PER_USEC
, MILLION
);
846 ioc
->vrate_max
= div64_u64((u64
)ioc
->params
.qos
[QOS_MAX
] *
847 VTIME_PER_USEC
, MILLION
);
852 /* take a snapshot of the current [v]time and vrate */
853 static void ioc_now(struct ioc
*ioc
, struct ioc_now
*now
)
857 now
->now_ns
= ktime_get();
858 now
->now
= ktime_to_us(now
->now_ns
);
859 now
->vrate
= atomic64_read(&ioc
->vtime_rate
);
862 * The current vtime is
864 * vtime at period start + (wallclock time since the start) * vrate
866 * As a consistent snapshot of `period_at_vtime` and `period_at` is
867 * needed, they're seqcount protected.
870 seq
= read_seqcount_begin(&ioc
->period_seqcount
);
871 now
->vnow
= ioc
->period_at_vtime
+
872 (now
->now
- ioc
->period_at
) * now
->vrate
;
873 } while (read_seqcount_retry(&ioc
->period_seqcount
, seq
));
876 static void ioc_start_period(struct ioc
*ioc
, struct ioc_now
*now
)
878 lockdep_assert_held(&ioc
->lock
);
879 WARN_ON_ONCE(ioc
->running
!= IOC_RUNNING
);
881 write_seqcount_begin(&ioc
->period_seqcount
);
882 ioc
->period_at
= now
->now
;
883 ioc
->period_at_vtime
= now
->vnow
;
884 write_seqcount_end(&ioc
->period_seqcount
);
886 ioc
->timer
.expires
= jiffies
+ usecs_to_jiffies(ioc
->period_us
);
887 add_timer(&ioc
->timer
);
891 * Update @iocg's `active` and `inuse` to @active and @inuse, update level
892 * weight sums and propagate upwards accordingly.
894 static void __propagate_active_weight(struct ioc_gq
*iocg
, u32 active
, u32 inuse
)
896 struct ioc
*ioc
= iocg
->ioc
;
899 lockdep_assert_held(&ioc
->lock
);
901 inuse
= min(active
, inuse
);
903 for (lvl
= iocg
->level
- 1; lvl
>= 0; lvl
--) {
904 struct ioc_gq
*parent
= iocg
->ancestors
[lvl
];
905 struct ioc_gq
*child
= iocg
->ancestors
[lvl
+ 1];
906 u32 parent_active
= 0, parent_inuse
= 0;
908 /* update the level sums */
909 parent
->child_active_sum
+= (s32
)(active
- child
->active
);
910 parent
->child_inuse_sum
+= (s32
)(inuse
- child
->inuse
);
911 /* apply the udpates */
912 child
->active
= active
;
913 child
->inuse
= inuse
;
916 * The delta between inuse and active sums indicates that
917 * that much of weight is being given away. Parent's inuse
918 * and active should reflect the ratio.
920 if (parent
->child_active_sum
) {
921 parent_active
= parent
->weight
;
922 parent_inuse
= DIV64_U64_ROUND_UP(
923 parent_active
* parent
->child_inuse_sum
,
924 parent
->child_active_sum
);
927 /* do we need to keep walking up? */
928 if (parent_active
== parent
->active
&&
929 parent_inuse
== parent
->inuse
)
932 active
= parent_active
;
933 inuse
= parent_inuse
;
936 ioc
->weights_updated
= true;
939 static void commit_active_weights(struct ioc
*ioc
)
941 lockdep_assert_held(&ioc
->lock
);
943 if (ioc
->weights_updated
) {
944 /* paired with rmb in current_hweight(), see there */
946 atomic_inc(&ioc
->hweight_gen
);
947 ioc
->weights_updated
= false;
951 static void propagate_active_weight(struct ioc_gq
*iocg
, u32 active
, u32 inuse
)
953 __propagate_active_weight(iocg
, active
, inuse
);
954 commit_active_weights(iocg
->ioc
);
957 static void current_hweight(struct ioc_gq
*iocg
, u32
*hw_activep
, u32
*hw_inusep
)
959 struct ioc
*ioc
= iocg
->ioc
;
964 /* hot path - if uptodate, use cached */
965 ioc_gen
= atomic_read(&ioc
->hweight_gen
);
966 if (ioc_gen
== iocg
->hweight_gen
)
970 * Paired with wmb in commit_active_weights(). If we saw the
971 * updated hweight_gen, all the weight updates from
972 * __propagate_active_weight() are visible too.
974 * We can race with weight updates during calculation and get it
975 * wrong. However, hweight_gen would have changed and a future
976 * reader will recalculate and we're guaranteed to discard the
981 hwa
= hwi
= HWEIGHT_WHOLE
;
982 for (lvl
= 0; lvl
<= iocg
->level
- 1; lvl
++) {
983 struct ioc_gq
*parent
= iocg
->ancestors
[lvl
];
984 struct ioc_gq
*child
= iocg
->ancestors
[lvl
+ 1];
985 u32 active_sum
= READ_ONCE(parent
->child_active_sum
);
986 u32 inuse_sum
= READ_ONCE(parent
->child_inuse_sum
);
987 u32 active
= READ_ONCE(child
->active
);
988 u32 inuse
= READ_ONCE(child
->inuse
);
990 /* we can race with deactivations and either may read as zero */
991 if (!active_sum
|| !inuse_sum
)
994 active_sum
= max(active
, active_sum
);
995 hwa
= hwa
* active
/ active_sum
; /* max 16bits * 10000 */
997 inuse_sum
= max(inuse
, inuse_sum
);
998 hwi
= hwi
* inuse
/ inuse_sum
; /* max 16bits * 10000 */
1001 iocg
->hweight_active
= max_t(u32
, hwa
, 1);
1002 iocg
->hweight_inuse
= max_t(u32
, hwi
, 1);
1003 iocg
->hweight_gen
= ioc_gen
;
1006 *hw_activep
= iocg
->hweight_active
;
1008 *hw_inusep
= iocg
->hweight_inuse
;
1011 static void weight_updated(struct ioc_gq
*iocg
)
1013 struct ioc
*ioc
= iocg
->ioc
;
1014 struct blkcg_gq
*blkg
= iocg_to_blkg(iocg
);
1015 struct ioc_cgrp
*iocc
= blkcg_to_iocc(blkg
->blkcg
);
1018 lockdep_assert_held(&ioc
->lock
);
1020 weight
= iocg
->cfg_weight
?: iocc
->dfl_weight
;
1021 if (weight
!= iocg
->weight
&& iocg
->active
)
1022 propagate_active_weight(iocg
, weight
,
1023 DIV64_U64_ROUND_UP(iocg
->inuse
* weight
, iocg
->weight
));
1024 iocg
->weight
= weight
;
1027 static bool iocg_activate(struct ioc_gq
*iocg
, struct ioc_now
*now
)
1029 struct ioc
*ioc
= iocg
->ioc
;
1030 u64 last_period
, cur_period
, max_period_delta
;
1031 u64 vtime
, vmargin
, vmin
;
1035 * If seem to be already active, just update the stamp to tell the
1036 * timer that we're still active. We don't mind occassional races.
1038 if (!list_empty(&iocg
->active_list
)) {
1040 cur_period
= atomic64_read(&ioc
->cur_period
);
1041 if (atomic64_read(&iocg
->active_period
) != cur_period
)
1042 atomic64_set(&iocg
->active_period
, cur_period
);
1046 /* racy check on internal node IOs, treat as root level IOs */
1047 if (iocg
->child_active_sum
)
1050 spin_lock_irq(&ioc
->lock
);
1055 cur_period
= atomic64_read(&ioc
->cur_period
);
1056 last_period
= atomic64_read(&iocg
->active_period
);
1057 atomic64_set(&iocg
->active_period
, cur_period
);
1059 /* already activated or breaking leaf-only constraint? */
1060 if (!list_empty(&iocg
->active_list
))
1061 goto succeed_unlock
;
1062 for (i
= iocg
->level
- 1; i
> 0; i
--)
1063 if (!list_empty(&iocg
->ancestors
[i
]->active_list
))
1066 if (iocg
->child_active_sum
)
1070 * vtime may wrap when vrate is raised substantially due to
1071 * underestimated IO costs. Look at the period and ignore its
1072 * vtime if the iocg has been idle for too long. Also, cap the
1073 * budget it can start with to the margin.
1075 max_period_delta
= DIV64_U64_ROUND_UP(VTIME_VALID_DUR
, ioc
->period_us
);
1076 vtime
= atomic64_read(&iocg
->vtime
);
1077 vmargin
= ioc
->margin_us
* now
->vrate
;
1078 vmin
= now
->vnow
- vmargin
;
1080 if (last_period
+ max_period_delta
< cur_period
||
1081 time_before64(vtime
, vmin
)) {
1082 atomic64_add(vmin
- vtime
, &iocg
->vtime
);
1083 atomic64_add(vmin
- vtime
, &iocg
->done_vtime
);
1088 * Activate, propagate weight and start period timer if not
1089 * running. Reset hweight_gen to avoid accidental match from
1092 iocg
->hweight_gen
= atomic_read(&ioc
->hweight_gen
) - 1;
1093 list_add(&iocg
->active_list
, &ioc
->active_iocgs
);
1094 propagate_active_weight(iocg
, iocg
->weight
,
1095 iocg
->last_inuse
?: iocg
->weight
);
1097 TRACE_IOCG_PATH(iocg_activate
, iocg
, now
,
1098 last_period
, cur_period
, vtime
);
1100 iocg
->last_vtime
= vtime
;
1102 if (ioc
->running
== IOC_IDLE
) {
1103 ioc
->running
= IOC_RUNNING
;
1104 ioc_start_period(ioc
, now
);
1108 spin_unlock_irq(&ioc
->lock
);
1112 spin_unlock_irq(&ioc
->lock
);
1116 static int iocg_wake_fn(struct wait_queue_entry
*wq_entry
, unsigned mode
,
1117 int flags
, void *key
)
1119 struct iocg_wait
*wait
= container_of(wq_entry
, struct iocg_wait
, wait
);
1120 struct iocg_wake_ctx
*ctx
= (struct iocg_wake_ctx
*)key
;
1121 u64 cost
= abs_cost_to_cost(wait
->abs_cost
, ctx
->hw_inuse
);
1123 ctx
->vbudget
-= cost
;
1125 if (ctx
->vbudget
< 0)
1128 iocg_commit_bio(ctx
->iocg
, wait
->bio
, cost
);
1131 * autoremove_wake_function() removes the wait entry only when it
1132 * actually changed the task state. We want the wait always
1133 * removed. Remove explicitly and use default_wake_function().
1135 list_del_init(&wq_entry
->entry
);
1136 wait
->committed
= true;
1138 default_wake_function(wq_entry
, mode
, flags
, key
);
1142 static void iocg_kick_waitq(struct ioc_gq
*iocg
, struct ioc_now
*now
)
1144 struct ioc
*ioc
= iocg
->ioc
;
1145 struct iocg_wake_ctx ctx
= { .iocg
= iocg
};
1146 u64 margin_ns
= (u64
)(ioc
->period_us
*
1147 WAITQ_TIMER_MARGIN_PCT
/ 100) * NSEC_PER_USEC
;
1148 u64 abs_vdebt
, vdebt
, vshortage
, expires
, oexpires
;
1152 lockdep_assert_held(&iocg
->waitq
.lock
);
1154 current_hweight(iocg
, NULL
, &hw_inuse
);
1155 vbudget
= now
->vnow
- atomic64_read(&iocg
->vtime
);
1158 abs_vdebt
= atomic64_read(&iocg
->abs_vdebt
);
1159 vdebt
= abs_cost_to_cost(abs_vdebt
, hw_inuse
);
1160 if (vdebt
&& vbudget
> 0) {
1161 u64 delta
= min_t(u64
, vbudget
, vdebt
);
1162 u64 abs_delta
= min(cost_to_abs_cost(delta
, hw_inuse
),
1165 atomic64_add(delta
, &iocg
->vtime
);
1166 atomic64_add(delta
, &iocg
->done_vtime
);
1167 atomic64_sub(abs_delta
, &iocg
->abs_vdebt
);
1168 if (WARN_ON_ONCE(atomic64_read(&iocg
->abs_vdebt
) < 0))
1169 atomic64_set(&iocg
->abs_vdebt
, 0);
1173 * Wake up the ones which are due and see how much vtime we'll need
1176 ctx
.hw_inuse
= hw_inuse
;
1177 ctx
.vbudget
= vbudget
- vdebt
;
1178 __wake_up_locked_key(&iocg
->waitq
, TASK_NORMAL
, &ctx
);
1179 if (!waitqueue_active(&iocg
->waitq
))
1181 if (WARN_ON_ONCE(ctx
.vbudget
>= 0))
1184 /* determine next wakeup, add a quarter margin to guarantee chunking */
1185 vshortage
= -ctx
.vbudget
;
1186 expires
= now
->now_ns
+
1187 DIV64_U64_ROUND_UP(vshortage
, now
->vrate
) * NSEC_PER_USEC
;
1188 expires
+= margin_ns
/ 4;
1190 /* if already active and close enough, don't bother */
1191 oexpires
= ktime_to_ns(hrtimer_get_softexpires(&iocg
->waitq_timer
));
1192 if (hrtimer_is_queued(&iocg
->waitq_timer
) &&
1193 abs(oexpires
- expires
) <= margin_ns
/ 4)
1196 hrtimer_start_range_ns(&iocg
->waitq_timer
, ns_to_ktime(expires
),
1197 margin_ns
/ 4, HRTIMER_MODE_ABS
);
1200 static enum hrtimer_restart
iocg_waitq_timer_fn(struct hrtimer
*timer
)
1202 struct ioc_gq
*iocg
= container_of(timer
, struct ioc_gq
, waitq_timer
);
1204 unsigned long flags
;
1206 ioc_now(iocg
->ioc
, &now
);
1208 spin_lock_irqsave(&iocg
->waitq
.lock
, flags
);
1209 iocg_kick_waitq(iocg
, &now
);
1210 spin_unlock_irqrestore(&iocg
->waitq
.lock
, flags
);
1212 return HRTIMER_NORESTART
;
1215 static bool iocg_kick_delay(struct ioc_gq
*iocg
, struct ioc_now
*now
, u64 cost
)
1217 struct ioc
*ioc
= iocg
->ioc
;
1218 struct blkcg_gq
*blkg
= iocg_to_blkg(iocg
);
1219 u64 vtime
= atomic64_read(&iocg
->vtime
);
1220 u64 vmargin
= ioc
->margin_us
* now
->vrate
;
1221 u64 margin_ns
= ioc
->margin_us
* NSEC_PER_USEC
;
1222 u64 expires
, oexpires
;
1225 /* debt-adjust vtime */
1226 current_hweight(iocg
, NULL
, &hw_inuse
);
1227 vtime
+= abs_cost_to_cost(atomic64_read(&iocg
->abs_vdebt
), hw_inuse
);
1229 /* clear or maintain depending on the overage */
1230 if (time_before_eq64(vtime
, now
->vnow
)) {
1231 blkcg_clear_delay(blkg
);
1234 if (!atomic_read(&blkg
->use_delay
) &&
1235 time_before_eq64(vtime
, now
->vnow
+ vmargin
))
1240 u64 cost_ns
= DIV64_U64_ROUND_UP(cost
* NSEC_PER_USEC
,
1242 blkcg_add_delay(blkg
, now
->now_ns
, cost_ns
);
1244 blkcg_use_delay(blkg
);
1246 expires
= now
->now_ns
+ DIV64_U64_ROUND_UP(vtime
- now
->vnow
,
1247 now
->vrate
) * NSEC_PER_USEC
;
1249 /* if already active and close enough, don't bother */
1250 oexpires
= ktime_to_ns(hrtimer_get_softexpires(&iocg
->delay_timer
));
1251 if (hrtimer_is_queued(&iocg
->delay_timer
) &&
1252 abs(oexpires
- expires
) <= margin_ns
/ 4)
1255 hrtimer_start_range_ns(&iocg
->delay_timer
, ns_to_ktime(expires
),
1256 margin_ns
/ 4, HRTIMER_MODE_ABS
);
1260 static enum hrtimer_restart
iocg_delay_timer_fn(struct hrtimer
*timer
)
1262 struct ioc_gq
*iocg
= container_of(timer
, struct ioc_gq
, delay_timer
);
1265 ioc_now(iocg
->ioc
, &now
);
1266 iocg_kick_delay(iocg
, &now
, 0);
1268 return HRTIMER_NORESTART
;
1271 static void ioc_lat_stat(struct ioc
*ioc
, u32
*missed_ppm_ar
, u32
*rq_wait_pct_p
)
1273 u32 nr_met
[2] = { };
1274 u32 nr_missed
[2] = { };
1278 for_each_online_cpu(cpu
) {
1279 struct ioc_pcpu_stat
*stat
= per_cpu_ptr(ioc
->pcpu_stat
, cpu
);
1280 u64 this_rq_wait_ns
;
1282 for (rw
= READ
; rw
<= WRITE
; rw
++) {
1283 u32 this_met
= READ_ONCE(stat
->missed
[rw
].nr_met
);
1284 u32 this_missed
= READ_ONCE(stat
->missed
[rw
].nr_missed
);
1286 nr_met
[rw
] += this_met
- stat
->missed
[rw
].last_met
;
1287 nr_missed
[rw
] += this_missed
- stat
->missed
[rw
].last_missed
;
1288 stat
->missed
[rw
].last_met
= this_met
;
1289 stat
->missed
[rw
].last_missed
= this_missed
;
1292 this_rq_wait_ns
= READ_ONCE(stat
->rq_wait_ns
);
1293 rq_wait_ns
+= this_rq_wait_ns
- stat
->last_rq_wait_ns
;
1294 stat
->last_rq_wait_ns
= this_rq_wait_ns
;
1297 for (rw
= READ
; rw
<= WRITE
; rw
++) {
1298 if (nr_met
[rw
] + nr_missed
[rw
])
1300 DIV64_U64_ROUND_UP((u64
)nr_missed
[rw
] * MILLION
,
1301 nr_met
[rw
] + nr_missed
[rw
]);
1303 missed_ppm_ar
[rw
] = 0;
1306 *rq_wait_pct_p
= div64_u64(rq_wait_ns
* 100,
1307 ioc
->period_us
* NSEC_PER_USEC
);
1310 /* was iocg idle this period? */
1311 static bool iocg_is_idle(struct ioc_gq
*iocg
)
1313 struct ioc
*ioc
= iocg
->ioc
;
1315 /* did something get issued this period? */
1316 if (atomic64_read(&iocg
->active_period
) ==
1317 atomic64_read(&ioc
->cur_period
))
1320 /* is something in flight? */
1321 if (atomic64_read(&iocg
->done_vtime
) < atomic64_read(&iocg
->vtime
))
1327 /* returns usage with margin added if surplus is large enough */
1328 static u32
surplus_adjusted_hweight_inuse(u32 usage
, u32 hw_inuse
)
1331 usage
= DIV_ROUND_UP(usage
* SURPLUS_SCALE_PCT
, 100);
1332 usage
+= SURPLUS_SCALE_ABS
;
1334 /* don't bother if the surplus is too small */
1335 if (usage
+ SURPLUS_MIN_ADJ_DELTA
> hw_inuse
)
1341 static void ioc_timer_fn(struct timer_list
*timer
)
1343 struct ioc
*ioc
= container_of(timer
, struct ioc
, timer
);
1344 struct ioc_gq
*iocg
, *tiocg
;
1346 int nr_surpluses
= 0, nr_shortages
= 0, nr_lagging
= 0;
1347 u32 ppm_rthr
= MILLION
- ioc
->params
.qos
[QOS_RPPM
];
1348 u32 ppm_wthr
= MILLION
- ioc
->params
.qos
[QOS_WPPM
];
1349 u32 missed_ppm
[2], rq_wait_pct
;
1351 int prev_busy_level
, i
;
1353 /* how were the latencies during the period? */
1354 ioc_lat_stat(ioc
, missed_ppm
, &rq_wait_pct
);
1356 /* take care of active iocgs */
1357 spin_lock_irq(&ioc
->lock
);
1361 period_vtime
= now
.vnow
- ioc
->period_at_vtime
;
1362 if (WARN_ON_ONCE(!period_vtime
)) {
1363 spin_unlock_irq(&ioc
->lock
);
1368 * Waiters determine the sleep durations based on the vrate they
1369 * saw at the time of sleep. If vrate has increased, some waiters
1370 * could be sleeping for too long. Wake up tardy waiters which
1371 * should have woken up in the last period and expire idle iocgs.
1373 list_for_each_entry_safe(iocg
, tiocg
, &ioc
->active_iocgs
, active_list
) {
1374 if (!waitqueue_active(&iocg
->waitq
) &&
1375 !atomic64_read(&iocg
->abs_vdebt
) && !iocg_is_idle(iocg
))
1378 spin_lock(&iocg
->waitq
.lock
);
1380 if (waitqueue_active(&iocg
->waitq
) ||
1381 atomic64_read(&iocg
->abs_vdebt
)) {
1382 /* might be oversleeping vtime / hweight changes, kick */
1383 iocg_kick_waitq(iocg
, &now
);
1384 iocg_kick_delay(iocg
, &now
, 0);
1385 } else if (iocg_is_idle(iocg
)) {
1386 /* no waiter and idle, deactivate */
1387 iocg
->last_inuse
= iocg
->inuse
;
1388 __propagate_active_weight(iocg
, 0, 0);
1389 list_del_init(&iocg
->active_list
);
1392 spin_unlock(&iocg
->waitq
.lock
);
1394 commit_active_weights(ioc
);
1396 /* calc usages and see whether some weights need to be moved around */
1397 list_for_each_entry(iocg
, &ioc
->active_iocgs
, active_list
) {
1398 u64 vdone
, vtime
, vusage
, vmargin
, vmin
;
1399 u32 hw_active
, hw_inuse
, usage
;
1402 * Collect unused and wind vtime closer to vnow to prevent
1403 * iocgs from accumulating a large amount of budget.
1405 vdone
= atomic64_read(&iocg
->done_vtime
);
1406 vtime
= atomic64_read(&iocg
->vtime
);
1407 current_hweight(iocg
, &hw_active
, &hw_inuse
);
1410 * Latency QoS detection doesn't account for IOs which are
1411 * in-flight for longer than a period. Detect them by
1412 * comparing vdone against period start. If lagging behind
1413 * IOs from past periods, don't increase vrate.
1415 if ((ppm_rthr
!= MILLION
|| ppm_wthr
!= MILLION
) &&
1416 !atomic_read(&iocg_to_blkg(iocg
)->use_delay
) &&
1417 time_after64(vtime
, vdone
) &&
1418 time_after64(vtime
, now
.vnow
-
1419 MAX_LAGGING_PERIODS
* period_vtime
) &&
1420 time_before64(vdone
, now
.vnow
- period_vtime
))
1423 if (waitqueue_active(&iocg
->waitq
))
1424 vusage
= now
.vnow
- iocg
->last_vtime
;
1425 else if (time_before64(iocg
->last_vtime
, vtime
))
1426 vusage
= vtime
- iocg
->last_vtime
;
1430 iocg
->last_vtime
+= vusage
;
1432 * Factor in in-flight vtime into vusage to avoid
1433 * high-latency completions appearing as idle. This should
1434 * be done after the above ->last_time adjustment.
1436 vusage
= max(vusage
, vtime
- vdone
);
1438 /* calculate hweight based usage ratio and record */
1440 usage
= DIV64_U64_ROUND_UP(vusage
* hw_inuse
,
1442 iocg
->usage_idx
= (iocg
->usage_idx
+ 1) % NR_USAGE_SLOTS
;
1443 iocg
->usages
[iocg
->usage_idx
] = usage
;
1448 /* see whether there's surplus vtime */
1449 vmargin
= ioc
->margin_us
* now
.vrate
;
1450 vmin
= now
.vnow
- vmargin
;
1452 iocg
->has_surplus
= false;
1454 if (!waitqueue_active(&iocg
->waitq
) &&
1455 time_before64(vtime
, vmin
)) {
1456 u64 delta
= vmin
- vtime
;
1458 /* throw away surplus vtime */
1459 atomic64_add(delta
, &iocg
->vtime
);
1460 atomic64_add(delta
, &iocg
->done_vtime
);
1461 iocg
->last_vtime
+= delta
;
1462 /* if usage is sufficiently low, maybe it can donate */
1463 if (surplus_adjusted_hweight_inuse(usage
, hw_inuse
)) {
1464 iocg
->has_surplus
= true;
1467 } else if (hw_inuse
< hw_active
) {
1468 u32 new_hwi
, new_inuse
;
1470 /* was donating but might need to take back some */
1471 if (waitqueue_active(&iocg
->waitq
)) {
1472 new_hwi
= hw_active
;
1474 new_hwi
= max(hw_inuse
,
1475 usage
* SURPLUS_SCALE_PCT
/ 100 +
1479 new_inuse
= div64_u64((u64
)iocg
->inuse
* new_hwi
,
1481 new_inuse
= clamp_t(u32
, new_inuse
, 1, iocg
->active
);
1483 if (new_inuse
> iocg
->inuse
) {
1484 TRACE_IOCG_PATH(inuse_takeback
, iocg
, &now
,
1485 iocg
->inuse
, new_inuse
,
1487 __propagate_active_weight(iocg
, iocg
->weight
,
1491 /* genuninely out of vtime */
1496 if (!nr_shortages
|| !nr_surpluses
)
1497 goto skip_surplus_transfers
;
1499 /* there are both shortages and surpluses, transfer surpluses */
1500 list_for_each_entry(iocg
, &ioc
->active_iocgs
, active_list
) {
1501 u32 usage
, hw_active
, hw_inuse
, new_hwi
, new_inuse
;
1504 if (!iocg
->has_surplus
)
1507 /* base the decision on max historical usage */
1508 for (i
= 0, usage
= 0; i
< NR_USAGE_SLOTS
; i
++) {
1509 if (iocg
->usages
[i
]) {
1510 usage
= max(usage
, iocg
->usages
[i
]);
1514 if (nr_valid
< MIN_VALID_USAGES
)
1517 current_hweight(iocg
, &hw_active
, &hw_inuse
);
1518 new_hwi
= surplus_adjusted_hweight_inuse(usage
, hw_inuse
);
1522 new_inuse
= DIV64_U64_ROUND_UP((u64
)iocg
->inuse
* new_hwi
,
1524 if (new_inuse
< iocg
->inuse
) {
1525 TRACE_IOCG_PATH(inuse_giveaway
, iocg
, &now
,
1526 iocg
->inuse
, new_inuse
,
1528 __propagate_active_weight(iocg
, iocg
->weight
, new_inuse
);
1531 skip_surplus_transfers
:
1532 commit_active_weights(ioc
);
1535 * If q is getting clogged or we're missing too much, we're issuing
1536 * too much IO and should lower vtime rate. If we're not missing
1537 * and experiencing shortages but not surpluses, we're too stingy
1538 * and should increase vtime rate.
1540 prev_busy_level
= ioc
->busy_level
;
1541 if (rq_wait_pct
> RQ_WAIT_BUSY_PCT
||
1542 missed_ppm
[READ
] > ppm_rthr
||
1543 missed_ppm
[WRITE
] > ppm_wthr
) {
1544 ioc
->busy_level
= max(ioc
->busy_level
, 0);
1546 } else if (rq_wait_pct
<= RQ_WAIT_BUSY_PCT
* UNBUSY_THR_PCT
/ 100 &&
1547 missed_ppm
[READ
] <= ppm_rthr
* UNBUSY_THR_PCT
/ 100 &&
1548 missed_ppm
[WRITE
] <= ppm_wthr
* UNBUSY_THR_PCT
/ 100) {
1549 /* take action iff there is contention */
1550 if (nr_shortages
&& !nr_lagging
) {
1551 ioc
->busy_level
= min(ioc
->busy_level
, 0);
1552 /* redistribute surpluses first */
1557 ioc
->busy_level
= 0;
1560 ioc
->busy_level
= clamp(ioc
->busy_level
, -1000, 1000);
1562 if (ioc
->busy_level
> 0 || (ioc
->busy_level
< 0 && !nr_lagging
)) {
1563 u64 vrate
= atomic64_read(&ioc
->vtime_rate
);
1564 u64 vrate_min
= ioc
->vrate_min
, vrate_max
= ioc
->vrate_max
;
1566 /* rq_wait signal is always reliable, ignore user vrate_min */
1567 if (rq_wait_pct
> RQ_WAIT_BUSY_PCT
)
1568 vrate_min
= VRATE_MIN
;
1571 * If vrate is out of bounds, apply clamp gradually as the
1572 * bounds can change abruptly. Otherwise, apply busy_level
1575 if (vrate
< vrate_min
) {
1576 vrate
= div64_u64(vrate
* (100 + VRATE_CLAMP_ADJ_PCT
),
1578 vrate
= min(vrate
, vrate_min
);
1579 } else if (vrate
> vrate_max
) {
1580 vrate
= div64_u64(vrate
* (100 - VRATE_CLAMP_ADJ_PCT
),
1582 vrate
= max(vrate
, vrate_max
);
1584 int idx
= min_t(int, abs(ioc
->busy_level
),
1585 ARRAY_SIZE(vrate_adj_pct
) - 1);
1586 u32 adj_pct
= vrate_adj_pct
[idx
];
1588 if (ioc
->busy_level
> 0)
1589 adj_pct
= 100 - adj_pct
;
1591 adj_pct
= 100 + adj_pct
;
1593 vrate
= clamp(DIV64_U64_ROUND_UP(vrate
* adj_pct
, 100),
1594 vrate_min
, vrate_max
);
1597 trace_iocost_ioc_vrate_adj(ioc
, vrate
, &missed_ppm
, rq_wait_pct
,
1598 nr_lagging
, nr_shortages
,
1601 atomic64_set(&ioc
->vtime_rate
, vrate
);
1602 ioc
->inuse_margin_vtime
= DIV64_U64_ROUND_UP(
1603 ioc
->period_us
* vrate
* INUSE_MARGIN_PCT
, 100);
1604 } else if (ioc
->busy_level
!= prev_busy_level
|| nr_lagging
) {
1605 trace_iocost_ioc_vrate_adj(ioc
, atomic64_read(&ioc
->vtime_rate
),
1606 &missed_ppm
, rq_wait_pct
, nr_lagging
,
1607 nr_shortages
, nr_surpluses
);
1610 ioc_refresh_params(ioc
, false);
1613 * This period is done. Move onto the next one. If nothing's
1614 * going on with the device, stop the timer.
1616 atomic64_inc(&ioc
->cur_period
);
1618 if (ioc
->running
!= IOC_STOP
) {
1619 if (!list_empty(&ioc
->active_iocgs
)) {
1620 ioc_start_period(ioc
, &now
);
1622 ioc
->busy_level
= 0;
1623 ioc
->running
= IOC_IDLE
;
1627 spin_unlock_irq(&ioc
->lock
);
1630 static void calc_vtime_cost_builtin(struct bio
*bio
, struct ioc_gq
*iocg
,
1631 bool is_merge
, u64
*costp
)
1633 struct ioc
*ioc
= iocg
->ioc
;
1634 u64 coef_seqio
, coef_randio
, coef_page
;
1635 u64 pages
= max_t(u64
, bio_sectors(bio
) >> IOC_SECT_TO_PAGE_SHIFT
, 1);
1639 switch (bio_op(bio
)) {
1641 coef_seqio
= ioc
->params
.lcoefs
[LCOEF_RSEQIO
];
1642 coef_randio
= ioc
->params
.lcoefs
[LCOEF_RRANDIO
];
1643 coef_page
= ioc
->params
.lcoefs
[LCOEF_RPAGE
];
1646 coef_seqio
= ioc
->params
.lcoefs
[LCOEF_WSEQIO
];
1647 coef_randio
= ioc
->params
.lcoefs
[LCOEF_WRANDIO
];
1648 coef_page
= ioc
->params
.lcoefs
[LCOEF_WPAGE
];
1655 seek_pages
= abs(bio
->bi_iter
.bi_sector
- iocg
->cursor
);
1656 seek_pages
>>= IOC_SECT_TO_PAGE_SHIFT
;
1660 if (seek_pages
> LCOEF_RANDIO_PAGES
) {
1661 cost
+= coef_randio
;
1666 cost
+= pages
* coef_page
;
1671 static u64
calc_vtime_cost(struct bio
*bio
, struct ioc_gq
*iocg
, bool is_merge
)
1675 calc_vtime_cost_builtin(bio
, iocg
, is_merge
, &cost
);
1679 static void ioc_rqos_throttle(struct rq_qos
*rqos
, struct bio
*bio
)
1681 struct blkcg_gq
*blkg
= bio
->bi_blkg
;
1682 struct ioc
*ioc
= rqos_to_ioc(rqos
);
1683 struct ioc_gq
*iocg
= blkg_to_iocg(blkg
);
1685 struct iocg_wait wait
;
1686 u32 hw_active
, hw_inuse
;
1687 u64 abs_cost
, cost
, vtime
;
1689 /* bypass IOs if disabled or for root cgroup */
1690 if (!ioc
->enabled
|| !iocg
->level
)
1693 /* always activate so that even 0 cost IOs get protected to some level */
1694 if (!iocg_activate(iocg
, &now
))
1697 /* calculate the absolute vtime cost */
1698 abs_cost
= calc_vtime_cost(bio
, iocg
, false);
1702 iocg
->cursor
= bio_end_sector(bio
);
1704 vtime
= atomic64_read(&iocg
->vtime
);
1705 current_hweight(iocg
, &hw_active
, &hw_inuse
);
1707 if (hw_inuse
< hw_active
&&
1708 time_after_eq64(vtime
+ ioc
->inuse_margin_vtime
, now
.vnow
)) {
1709 TRACE_IOCG_PATH(inuse_reset
, iocg
, &now
,
1710 iocg
->inuse
, iocg
->weight
, hw_inuse
, hw_active
);
1711 spin_lock_irq(&ioc
->lock
);
1712 propagate_active_weight(iocg
, iocg
->weight
, iocg
->weight
);
1713 spin_unlock_irq(&ioc
->lock
);
1714 current_hweight(iocg
, &hw_active
, &hw_inuse
);
1717 cost
= abs_cost_to_cost(abs_cost
, hw_inuse
);
1720 * If no one's waiting and within budget, issue right away. The
1721 * tests are racy but the races aren't systemic - we only miss once
1722 * in a while which is fine.
1724 if (!waitqueue_active(&iocg
->waitq
) &&
1725 !atomic64_read(&iocg
->abs_vdebt
) &&
1726 time_before_eq64(vtime
+ cost
, now
.vnow
)) {
1727 iocg_commit_bio(iocg
, bio
, cost
);
1732 * We're over budget. If @bio has to be issued regardless,
1733 * remember the abs_cost instead of advancing vtime.
1734 * iocg_kick_waitq() will pay off the debt before waking more IOs.
1735 * This way, the debt is continuously paid off each period with the
1736 * actual budget available to the cgroup. If we just wound vtime,
1737 * we would incorrectly use the current hw_inuse for the entire
1738 * amount which, for example, can lead to the cgroup staying
1739 * blocked for a long time even with substantially raised hw_inuse.
1741 if (bio_issue_as_root_blkg(bio
) || fatal_signal_pending(current
)) {
1742 atomic64_add(abs_cost
, &iocg
->abs_vdebt
);
1743 if (iocg_kick_delay(iocg
, &now
, cost
))
1744 blkcg_schedule_throttle(rqos
->q
,
1745 (bio
->bi_opf
& REQ_SWAP
) == REQ_SWAP
);
1750 * Append self to the waitq and schedule the wakeup timer if we're
1751 * the first waiter. The timer duration is calculated based on the
1752 * current vrate. vtime and hweight changes can make it too short
1753 * or too long. Each wait entry records the absolute cost it's
1754 * waiting for to allow re-evaluation using a custom wait entry.
1756 * If too short, the timer simply reschedules itself. If too long,
1757 * the period timer will notice and trigger wakeups.
1759 * All waiters are on iocg->waitq and the wait states are
1760 * synchronized using waitq.lock.
1762 spin_lock_irq(&iocg
->waitq
.lock
);
1765 * We activated above but w/o any synchronization. Deactivation is
1766 * synchronized with waitq.lock and we won't get deactivated as
1767 * long as we're waiting, so we're good if we're activated here.
1768 * In the unlikely case that we are deactivated, just issue the IO.
1770 if (unlikely(list_empty(&iocg
->active_list
))) {
1771 spin_unlock_irq(&iocg
->waitq
.lock
);
1772 iocg_commit_bio(iocg
, bio
, cost
);
1776 init_waitqueue_func_entry(&wait
.wait
, iocg_wake_fn
);
1777 wait
.wait
.private = current
;
1779 wait
.abs_cost
= abs_cost
;
1780 wait
.committed
= false; /* will be set true by waker */
1782 __add_wait_queue_entry_tail(&iocg
->waitq
, &wait
.wait
);
1783 iocg_kick_waitq(iocg
, &now
);
1785 spin_unlock_irq(&iocg
->waitq
.lock
);
1788 set_current_state(TASK_UNINTERRUPTIBLE
);
1794 /* waker already committed us, proceed */
1795 finish_wait(&iocg
->waitq
, &wait
.wait
);
1798 static void ioc_rqos_merge(struct rq_qos
*rqos
, struct request
*rq
,
1801 struct ioc_gq
*iocg
= blkg_to_iocg(bio
->bi_blkg
);
1802 struct ioc
*ioc
= iocg
->ioc
;
1803 sector_t bio_end
= bio_end_sector(bio
);
1808 /* bypass if disabled or for root cgroup */
1809 if (!ioc
->enabled
|| !iocg
->level
)
1812 abs_cost
= calc_vtime_cost(bio
, iocg
, true);
1817 current_hweight(iocg
, NULL
, &hw_inuse
);
1818 cost
= abs_cost_to_cost(abs_cost
, hw_inuse
);
1820 /* update cursor if backmerging into the request at the cursor */
1821 if (blk_rq_pos(rq
) < bio_end
&&
1822 blk_rq_pos(rq
) + blk_rq_sectors(rq
) == iocg
->cursor
)
1823 iocg
->cursor
= bio_end
;
1826 * Charge if there's enough vtime budget and the existing request
1827 * has cost assigned. Otherwise, account it as debt. See debt
1828 * handling in ioc_rqos_throttle() for details.
1830 if (rq
->bio
&& rq
->bio
->bi_iocost_cost
&&
1831 time_before_eq64(atomic64_read(&iocg
->vtime
) + cost
, now
.vnow
))
1832 iocg_commit_bio(iocg
, bio
, cost
);
1834 atomic64_add(abs_cost
, &iocg
->abs_vdebt
);
1837 static void ioc_rqos_done_bio(struct rq_qos
*rqos
, struct bio
*bio
)
1839 struct ioc_gq
*iocg
= blkg_to_iocg(bio
->bi_blkg
);
1841 if (iocg
&& bio
->bi_iocost_cost
)
1842 atomic64_add(bio
->bi_iocost_cost
, &iocg
->done_vtime
);
1845 static void ioc_rqos_done(struct rq_qos
*rqos
, struct request
*rq
)
1847 struct ioc
*ioc
= rqos_to_ioc(rqos
);
1848 u64 on_q_ns
, rq_wait_ns
;
1851 if (!ioc
->enabled
|| !rq
->alloc_time_ns
|| !rq
->start_time_ns
)
1854 switch (req_op(rq
) & REQ_OP_MASK
) {
1867 on_q_ns
= ktime_get_ns() - rq
->alloc_time_ns
;
1868 rq_wait_ns
= rq
->start_time_ns
- rq
->alloc_time_ns
;
1870 if (on_q_ns
<= ioc
->params
.qos
[pidx
] * NSEC_PER_USEC
)
1871 this_cpu_inc(ioc
->pcpu_stat
->missed
[rw
].nr_met
);
1873 this_cpu_inc(ioc
->pcpu_stat
->missed
[rw
].nr_missed
);
1875 this_cpu_add(ioc
->pcpu_stat
->rq_wait_ns
, rq_wait_ns
);
1878 static void ioc_rqos_queue_depth_changed(struct rq_qos
*rqos
)
1880 struct ioc
*ioc
= rqos_to_ioc(rqos
);
1882 spin_lock_irq(&ioc
->lock
);
1883 ioc_refresh_params(ioc
, false);
1884 spin_unlock_irq(&ioc
->lock
);
1887 static void ioc_rqos_exit(struct rq_qos
*rqos
)
1889 struct ioc
*ioc
= rqos_to_ioc(rqos
);
1891 blkcg_deactivate_policy(rqos
->q
, &blkcg_policy_iocost
);
1893 spin_lock_irq(&ioc
->lock
);
1894 ioc
->running
= IOC_STOP
;
1895 spin_unlock_irq(&ioc
->lock
);
1897 del_timer_sync(&ioc
->timer
);
1898 free_percpu(ioc
->pcpu_stat
);
1902 static struct rq_qos_ops ioc_rqos_ops
= {
1903 .throttle
= ioc_rqos_throttle
,
1904 .merge
= ioc_rqos_merge
,
1905 .done_bio
= ioc_rqos_done_bio
,
1906 .done
= ioc_rqos_done
,
1907 .queue_depth_changed
= ioc_rqos_queue_depth_changed
,
1908 .exit
= ioc_rqos_exit
,
1911 static int blk_iocost_init(struct request_queue
*q
)
1914 struct rq_qos
*rqos
;
1917 ioc
= kzalloc(sizeof(*ioc
), GFP_KERNEL
);
1921 ioc
->pcpu_stat
= alloc_percpu(struct ioc_pcpu_stat
);
1922 if (!ioc
->pcpu_stat
) {
1928 rqos
->id
= RQ_QOS_COST
;
1929 rqos
->ops
= &ioc_rqos_ops
;
1932 spin_lock_init(&ioc
->lock
);
1933 timer_setup(&ioc
->timer
, ioc_timer_fn
, 0);
1934 INIT_LIST_HEAD(&ioc
->active_iocgs
);
1936 ioc
->running
= IOC_IDLE
;
1937 atomic64_set(&ioc
->vtime_rate
, VTIME_PER_USEC
);
1938 seqcount_init(&ioc
->period_seqcount
);
1939 ioc
->period_at
= ktime_to_us(ktime_get());
1940 atomic64_set(&ioc
->cur_period
, 0);
1941 atomic_set(&ioc
->hweight_gen
, 0);
1943 spin_lock_irq(&ioc
->lock
);
1944 ioc
->autop_idx
= AUTOP_INVALID
;
1945 ioc_refresh_params(ioc
, true);
1946 spin_unlock_irq(&ioc
->lock
);
1948 rq_qos_add(q
, rqos
);
1949 ret
= blkcg_activate_policy(q
, &blkcg_policy_iocost
);
1951 rq_qos_del(q
, rqos
);
1952 free_percpu(ioc
->pcpu_stat
);
1959 static struct blkcg_policy_data
*ioc_cpd_alloc(gfp_t gfp
)
1961 struct ioc_cgrp
*iocc
;
1963 iocc
= kzalloc(sizeof(struct ioc_cgrp
), gfp
);
1967 iocc
->dfl_weight
= CGROUP_WEIGHT_DFL
;
1971 static void ioc_cpd_free(struct blkcg_policy_data
*cpd
)
1973 kfree(container_of(cpd
, struct ioc_cgrp
, cpd
));
1976 static struct blkg_policy_data
*ioc_pd_alloc(gfp_t gfp
, struct request_queue
*q
,
1977 struct blkcg
*blkcg
)
1979 int levels
= blkcg
->css
.cgroup
->level
+ 1;
1980 struct ioc_gq
*iocg
;
1982 iocg
= kzalloc_node(sizeof(*iocg
) + levels
* sizeof(iocg
->ancestors
[0]),
1990 static void ioc_pd_init(struct blkg_policy_data
*pd
)
1992 struct ioc_gq
*iocg
= pd_to_iocg(pd
);
1993 struct blkcg_gq
*blkg
= pd_to_blkg(&iocg
->pd
);
1994 struct ioc
*ioc
= q_to_ioc(blkg
->q
);
1996 struct blkcg_gq
*tblkg
;
1997 unsigned long flags
;
2002 atomic64_set(&iocg
->vtime
, now
.vnow
);
2003 atomic64_set(&iocg
->done_vtime
, now
.vnow
);
2004 atomic64_set(&iocg
->abs_vdebt
, 0);
2005 atomic64_set(&iocg
->active_period
, atomic64_read(&ioc
->cur_period
));
2006 INIT_LIST_HEAD(&iocg
->active_list
);
2007 iocg
->hweight_active
= HWEIGHT_WHOLE
;
2008 iocg
->hweight_inuse
= HWEIGHT_WHOLE
;
2010 init_waitqueue_head(&iocg
->waitq
);
2011 hrtimer_init(&iocg
->waitq_timer
, CLOCK_MONOTONIC
, HRTIMER_MODE_ABS
);
2012 iocg
->waitq_timer
.function
= iocg_waitq_timer_fn
;
2013 hrtimer_init(&iocg
->delay_timer
, CLOCK_MONOTONIC
, HRTIMER_MODE_ABS
);
2014 iocg
->delay_timer
.function
= iocg_delay_timer_fn
;
2016 iocg
->level
= blkg
->blkcg
->css
.cgroup
->level
;
2018 for (tblkg
= blkg
; tblkg
; tblkg
= tblkg
->parent
) {
2019 struct ioc_gq
*tiocg
= blkg_to_iocg(tblkg
);
2020 iocg
->ancestors
[tiocg
->level
] = tiocg
;
2023 spin_lock_irqsave(&ioc
->lock
, flags
);
2024 weight_updated(iocg
);
2025 spin_unlock_irqrestore(&ioc
->lock
, flags
);
2028 static void ioc_pd_free(struct blkg_policy_data
*pd
)
2030 struct ioc_gq
*iocg
= pd_to_iocg(pd
);
2031 struct ioc
*ioc
= iocg
->ioc
;
2034 spin_lock(&ioc
->lock
);
2035 if (!list_empty(&iocg
->active_list
)) {
2036 propagate_active_weight(iocg
, 0, 0);
2037 list_del_init(&iocg
->active_list
);
2039 spin_unlock(&ioc
->lock
);
2041 hrtimer_cancel(&iocg
->waitq_timer
);
2042 hrtimer_cancel(&iocg
->delay_timer
);
2047 static u64
ioc_weight_prfill(struct seq_file
*sf
, struct blkg_policy_data
*pd
,
2050 const char *dname
= blkg_dev_name(pd
->blkg
);
2051 struct ioc_gq
*iocg
= pd_to_iocg(pd
);
2053 if (dname
&& iocg
->cfg_weight
)
2054 seq_printf(sf
, "%s %u\n", dname
, iocg
->cfg_weight
);
2059 static int ioc_weight_show(struct seq_file
*sf
, void *v
)
2061 struct blkcg
*blkcg
= css_to_blkcg(seq_css(sf
));
2062 struct ioc_cgrp
*iocc
= blkcg_to_iocc(blkcg
);
2064 seq_printf(sf
, "default %u\n", iocc
->dfl_weight
);
2065 blkcg_print_blkgs(sf
, blkcg
, ioc_weight_prfill
,
2066 &blkcg_policy_iocost
, seq_cft(sf
)->private, false);
2070 static ssize_t
ioc_weight_write(struct kernfs_open_file
*of
, char *buf
,
2071 size_t nbytes
, loff_t off
)
2073 struct blkcg
*blkcg
= css_to_blkcg(of_css(of
));
2074 struct ioc_cgrp
*iocc
= blkcg_to_iocc(blkcg
);
2075 struct blkg_conf_ctx ctx
;
2076 struct ioc_gq
*iocg
;
2080 if (!strchr(buf
, ':')) {
2081 struct blkcg_gq
*blkg
;
2083 if (!sscanf(buf
, "default %u", &v
) && !sscanf(buf
, "%u", &v
))
2086 if (v
< CGROUP_WEIGHT_MIN
|| v
> CGROUP_WEIGHT_MAX
)
2089 spin_lock(&blkcg
->lock
);
2090 iocc
->dfl_weight
= v
;
2091 hlist_for_each_entry(blkg
, &blkcg
->blkg_list
, blkcg_node
) {
2092 struct ioc_gq
*iocg
= blkg_to_iocg(blkg
);
2095 spin_lock_irq(&iocg
->ioc
->lock
);
2096 weight_updated(iocg
);
2097 spin_unlock_irq(&iocg
->ioc
->lock
);
2100 spin_unlock(&blkcg
->lock
);
2105 ret
= blkg_conf_prep(blkcg
, &blkcg_policy_iocost
, buf
, &ctx
);
2109 iocg
= blkg_to_iocg(ctx
.blkg
);
2111 if (!strncmp(ctx
.body
, "default", 7)) {
2114 if (!sscanf(ctx
.body
, "%u", &v
))
2116 if (v
< CGROUP_WEIGHT_MIN
|| v
> CGROUP_WEIGHT_MAX
)
2120 spin_lock(&iocg
->ioc
->lock
);
2121 iocg
->cfg_weight
= v
;
2122 weight_updated(iocg
);
2123 spin_unlock(&iocg
->ioc
->lock
);
2125 blkg_conf_finish(&ctx
);
2129 blkg_conf_finish(&ctx
);
2133 static u64
ioc_qos_prfill(struct seq_file
*sf
, struct blkg_policy_data
*pd
,
2136 const char *dname
= blkg_dev_name(pd
->blkg
);
2137 struct ioc
*ioc
= pd_to_iocg(pd
)->ioc
;
2142 seq_printf(sf
, "%s enable=%d ctrl=%s rpct=%u.%02u rlat=%u wpct=%u.%02u wlat=%u min=%u.%02u max=%u.%02u\n",
2143 dname
, ioc
->enabled
, ioc
->user_qos_params
? "user" : "auto",
2144 ioc
->params
.qos
[QOS_RPPM
] / 10000,
2145 ioc
->params
.qos
[QOS_RPPM
] % 10000 / 100,
2146 ioc
->params
.qos
[QOS_RLAT
],
2147 ioc
->params
.qos
[QOS_WPPM
] / 10000,
2148 ioc
->params
.qos
[QOS_WPPM
] % 10000 / 100,
2149 ioc
->params
.qos
[QOS_WLAT
],
2150 ioc
->params
.qos
[QOS_MIN
] / 10000,
2151 ioc
->params
.qos
[QOS_MIN
] % 10000 / 100,
2152 ioc
->params
.qos
[QOS_MAX
] / 10000,
2153 ioc
->params
.qos
[QOS_MAX
] % 10000 / 100);
2157 static int ioc_qos_show(struct seq_file
*sf
, void *v
)
2159 struct blkcg
*blkcg
= css_to_blkcg(seq_css(sf
));
2161 blkcg_print_blkgs(sf
, blkcg
, ioc_qos_prfill
,
2162 &blkcg_policy_iocost
, seq_cft(sf
)->private, false);
2166 static const match_table_t qos_ctrl_tokens
= {
2167 { QOS_ENABLE
, "enable=%u" },
2168 { QOS_CTRL
, "ctrl=%s" },
2169 { NR_QOS_CTRL_PARAMS
, NULL
},
2172 static const match_table_t qos_tokens
= {
2173 { QOS_RPPM
, "rpct=%s" },
2174 { QOS_RLAT
, "rlat=%u" },
2175 { QOS_WPPM
, "wpct=%s" },
2176 { QOS_WLAT
, "wlat=%u" },
2177 { QOS_MIN
, "min=%s" },
2178 { QOS_MAX
, "max=%s" },
2179 { NR_QOS_PARAMS
, NULL
},
2182 static ssize_t
ioc_qos_write(struct kernfs_open_file
*of
, char *input
,
2183 size_t nbytes
, loff_t off
)
2185 struct gendisk
*disk
;
2187 u32 qos
[NR_QOS_PARAMS
];
2192 disk
= blkcg_conf_get_disk(&input
);
2194 return PTR_ERR(disk
);
2196 ioc
= q_to_ioc(disk
->queue
);
2198 ret
= blk_iocost_init(disk
->queue
);
2201 ioc
= q_to_ioc(disk
->queue
);
2204 spin_lock_irq(&ioc
->lock
);
2205 memcpy(qos
, ioc
->params
.qos
, sizeof(qos
));
2206 enable
= ioc
->enabled
;
2207 user
= ioc
->user_qos_params
;
2208 spin_unlock_irq(&ioc
->lock
);
2210 while ((p
= strsep(&input
, " \t\n"))) {
2211 substring_t args
[MAX_OPT_ARGS
];
2219 switch (match_token(p
, qos_ctrl_tokens
, args
)) {
2221 match_u64(&args
[0], &v
);
2225 match_strlcpy(buf
, &args
[0], sizeof(buf
));
2226 if (!strcmp(buf
, "auto"))
2228 else if (!strcmp(buf
, "user"))
2235 tok
= match_token(p
, qos_tokens
, args
);
2239 if (match_strlcpy(buf
, &args
[0], sizeof(buf
)) >=
2242 if (cgroup_parse_float(buf
, 2, &v
))
2244 if (v
< 0 || v
> 10000)
2250 if (match_u64(&args
[0], &v
))
2256 if (match_strlcpy(buf
, &args
[0], sizeof(buf
)) >=
2259 if (cgroup_parse_float(buf
, 2, &v
))
2263 qos
[tok
] = clamp_t(s64
, v
* 100,
2264 VRATE_MIN_PPM
, VRATE_MAX_PPM
);
2272 if (qos
[QOS_MIN
] > qos
[QOS_MAX
])
2275 spin_lock_irq(&ioc
->lock
);
2278 blk_queue_flag_set(QUEUE_FLAG_RQ_ALLOC_TIME
, ioc
->rqos
.q
);
2279 ioc
->enabled
= true;
2281 blk_queue_flag_clear(QUEUE_FLAG_RQ_ALLOC_TIME
, ioc
->rqos
.q
);
2282 ioc
->enabled
= false;
2286 memcpy(ioc
->params
.qos
, qos
, sizeof(qos
));
2287 ioc
->user_qos_params
= true;
2289 ioc
->user_qos_params
= false;
2292 ioc_refresh_params(ioc
, true);
2293 spin_unlock_irq(&ioc
->lock
);
2295 put_disk_and_module(disk
);
2300 put_disk_and_module(disk
);
2304 static u64
ioc_cost_model_prfill(struct seq_file
*sf
,
2305 struct blkg_policy_data
*pd
, int off
)
2307 const char *dname
= blkg_dev_name(pd
->blkg
);
2308 struct ioc
*ioc
= pd_to_iocg(pd
)->ioc
;
2309 u64
*u
= ioc
->params
.i_lcoefs
;
2314 seq_printf(sf
, "%s ctrl=%s model=linear "
2315 "rbps=%llu rseqiops=%llu rrandiops=%llu "
2316 "wbps=%llu wseqiops=%llu wrandiops=%llu\n",
2317 dname
, ioc
->user_cost_model
? "user" : "auto",
2318 u
[I_LCOEF_RBPS
], u
[I_LCOEF_RSEQIOPS
], u
[I_LCOEF_RRANDIOPS
],
2319 u
[I_LCOEF_WBPS
], u
[I_LCOEF_WSEQIOPS
], u
[I_LCOEF_WRANDIOPS
]);
2323 static int ioc_cost_model_show(struct seq_file
*sf
, void *v
)
2325 struct blkcg
*blkcg
= css_to_blkcg(seq_css(sf
));
2327 blkcg_print_blkgs(sf
, blkcg
, ioc_cost_model_prfill
,
2328 &blkcg_policy_iocost
, seq_cft(sf
)->private, false);
2332 static const match_table_t cost_ctrl_tokens
= {
2333 { COST_CTRL
, "ctrl=%s" },
2334 { COST_MODEL
, "model=%s" },
2335 { NR_COST_CTRL_PARAMS
, NULL
},
2338 static const match_table_t i_lcoef_tokens
= {
2339 { I_LCOEF_RBPS
, "rbps=%u" },
2340 { I_LCOEF_RSEQIOPS
, "rseqiops=%u" },
2341 { I_LCOEF_RRANDIOPS
, "rrandiops=%u" },
2342 { I_LCOEF_WBPS
, "wbps=%u" },
2343 { I_LCOEF_WSEQIOPS
, "wseqiops=%u" },
2344 { I_LCOEF_WRANDIOPS
, "wrandiops=%u" },
2345 { NR_I_LCOEFS
, NULL
},
2348 static ssize_t
ioc_cost_model_write(struct kernfs_open_file
*of
, char *input
,
2349 size_t nbytes
, loff_t off
)
2351 struct gendisk
*disk
;
2358 disk
= blkcg_conf_get_disk(&input
);
2360 return PTR_ERR(disk
);
2362 ioc
= q_to_ioc(disk
->queue
);
2364 ret
= blk_iocost_init(disk
->queue
);
2367 ioc
= q_to_ioc(disk
->queue
);
2370 spin_lock_irq(&ioc
->lock
);
2371 memcpy(u
, ioc
->params
.i_lcoefs
, sizeof(u
));
2372 user
= ioc
->user_cost_model
;
2373 spin_unlock_irq(&ioc
->lock
);
2375 while ((p
= strsep(&input
, " \t\n"))) {
2376 substring_t args
[MAX_OPT_ARGS
];
2384 switch (match_token(p
, cost_ctrl_tokens
, args
)) {
2386 match_strlcpy(buf
, &args
[0], sizeof(buf
));
2387 if (!strcmp(buf
, "auto"))
2389 else if (!strcmp(buf
, "user"))
2395 match_strlcpy(buf
, &args
[0], sizeof(buf
));
2396 if (strcmp(buf
, "linear"))
2401 tok
= match_token(p
, i_lcoef_tokens
, args
);
2402 if (tok
== NR_I_LCOEFS
)
2404 if (match_u64(&args
[0], &v
))
2410 spin_lock_irq(&ioc
->lock
);
2412 memcpy(ioc
->params
.i_lcoefs
, u
, sizeof(u
));
2413 ioc
->user_cost_model
= true;
2415 ioc
->user_cost_model
= false;
2417 ioc_refresh_params(ioc
, true);
2418 spin_unlock_irq(&ioc
->lock
);
2420 put_disk_and_module(disk
);
2426 put_disk_and_module(disk
);
2430 static struct cftype ioc_files
[] = {
2433 .flags
= CFTYPE_NOT_ON_ROOT
,
2434 .seq_show
= ioc_weight_show
,
2435 .write
= ioc_weight_write
,
2439 .flags
= CFTYPE_ONLY_ON_ROOT
,
2440 .seq_show
= ioc_qos_show
,
2441 .write
= ioc_qos_write
,
2444 .name
= "cost.model",
2445 .flags
= CFTYPE_ONLY_ON_ROOT
,
2446 .seq_show
= ioc_cost_model_show
,
2447 .write
= ioc_cost_model_write
,
2452 static struct blkcg_policy blkcg_policy_iocost
= {
2453 .dfl_cftypes
= ioc_files
,
2454 .cpd_alloc_fn
= ioc_cpd_alloc
,
2455 .cpd_free_fn
= ioc_cpd_free
,
2456 .pd_alloc_fn
= ioc_pd_alloc
,
2457 .pd_init_fn
= ioc_pd_init
,
2458 .pd_free_fn
= ioc_pd_free
,
2461 static int __init
ioc_init(void)
2463 return blkcg_policy_register(&blkcg_policy_iocost
);
2466 static void __exit
ioc_exit(void)
2468 return blkcg_policy_unregister(&blkcg_policy_iocost
);
2471 module_init(ioc_init
);
2472 module_exit(ioc_exit
);