ip6_tunnel: better validate user provided tunnel names
[linux/fpc-iii.git] / drivers / ide / buddha.c
blob46eaf58d881b4e31032327e7c248979d693d9c11
1 /*
2 * Amiga Buddha, Catweasel and X-Surf IDE Driver
4 * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
6 * This driver was written based on the specifications in README.buddha and
7 * the X-Surf info from Inside_XSurf.txt available at
8 * http://www.jschoenfeld.com
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
12 * more details.
14 * TODO:
15 * - test it :-)
16 * - tune the timings using the speed-register
19 #include <linux/types.h>
20 #include <linux/mm.h>
21 #include <linux/interrupt.h>
22 #include <linux/blkdev.h>
23 #include <linux/zorro.h>
24 #include <linux/ide.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
33 * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
36 #define BUDDHA_NUM_HWIFS 2
37 #define CATWEASEL_NUM_HWIFS 3
38 #define XSURF_NUM_HWIFS 2
40 #define MAX_NUM_HWIFS 3
43 * Bases of the IDE interfaces (relative to the board address)
46 #define BUDDHA_BASE1 0x800
47 #define BUDDHA_BASE2 0xa00
48 #define BUDDHA_BASE3 0xc00
50 #define XSURF_BASE1 0xb000 /* 2.5" Interface */
51 #define XSURF_BASE2 0xd000 /* 3.5" Interface */
53 static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
54 BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
57 static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
58 XSURF_BASE1, XSURF_BASE2
62 * Offsets from one of the above bases
65 #define BUDDHA_CONTROL 0x11a
68 * Other registers
71 #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
72 #define BUDDHA_IRQ2 0xf40 /* interrupt */
73 #define BUDDHA_IRQ3 0xf80
75 #define XSURF_IRQ1 0x7e
76 #define XSURF_IRQ2 0x7e
78 static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
79 BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
82 static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
83 XSURF_IRQ1, XSURF_IRQ2
86 #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
90 * Board information
93 typedef enum BuddhaType_Enum {
94 BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
95 } BuddhaType;
97 static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
100 * Check and acknowledge the interrupt status
103 static int buddha_test_irq(ide_hwif_t *hwif)
105 unsigned char ch;
107 ch = z_readb(hwif->io_ports.irq_addr);
108 if (!(ch & 0x80))
109 return 0;
110 return 1;
113 static void xsurf_clear_irq(ide_drive_t *drive)
116 * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
118 z_writeb(0, drive->hwif->io_ports.irq_addr);
121 static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
122 unsigned long ctl, unsigned long irq_port)
124 int i;
126 memset(hw, 0, sizeof(*hw));
128 hw->io_ports.data_addr = base;
130 for (i = 1; i < 8; i++)
131 hw->io_ports_array[i] = base + 2 + i * 4;
133 hw->io_ports.ctl_addr = ctl;
134 hw->io_ports.irq_addr = irq_port;
136 hw->irq = IRQ_AMIGA_PORTS;
139 static const struct ide_port_ops buddha_port_ops = {
140 .test_irq = buddha_test_irq,
143 static const struct ide_port_ops xsurf_port_ops = {
144 .clear_irq = xsurf_clear_irq,
145 .test_irq = buddha_test_irq,
148 static const struct ide_port_info buddha_port_info = {
149 .port_ops = &buddha_port_ops,
150 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
151 .irq_flags = IRQF_SHARED,
152 .chipset = ide_generic,
156 * Probe for a Buddha or Catweasel IDE interface
159 static int __init buddha_init(void)
161 struct zorro_dev *z = NULL;
162 u_long buddha_board = 0;
163 BuddhaType type;
164 int buddha_num_hwifs, i;
166 while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
167 unsigned long board;
168 struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
169 struct ide_port_info d = buddha_port_info;
171 if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
172 buddha_num_hwifs = BUDDHA_NUM_HWIFS;
173 type=BOARD_BUDDHA;
174 } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
175 buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
176 type=BOARD_CATWEASEL;
177 } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
178 buddha_num_hwifs = XSURF_NUM_HWIFS;
179 type=BOARD_XSURF;
180 d.port_ops = &xsurf_port_ops;
181 } else
182 continue;
184 board = z->resource.start;
186 if(type != BOARD_XSURF) {
187 if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
188 continue;
189 } else {
190 if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
191 continue;
192 if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
193 goto fail_base2;
194 if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
195 release_mem_region(board+XSURF_BASE2, 0x1000);
196 fail_base2:
197 release_mem_region(board+XSURF_BASE1, 0x1000);
198 continue;
201 buddha_board = (unsigned long)ZTWO_VADDR(board);
203 /* write to BUDDHA_IRQ_MR to enable the board IRQ */
204 /* X-Surf doesn't have this. IRQs are always on */
205 if (type != BOARD_XSURF)
206 z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
208 printk(KERN_INFO "ide: %s IDE controller\n",
209 buddha_board_name[type]);
211 for (i = 0; i < buddha_num_hwifs; i++) {
212 unsigned long base, ctl, irq_port;
214 if (type != BOARD_XSURF) {
215 base = buddha_board + buddha_bases[i];
216 ctl = base + BUDDHA_CONTROL;
217 irq_port = buddha_board + buddha_irqports[i];
218 } else {
219 base = buddha_board + xsurf_bases[i];
220 /* X-Surf has no CS1* (Control/AltStat) */
221 ctl = 0;
222 irq_port = buddha_board + xsurf_irqports[i];
225 buddha_setup_ports(&hw[i], base, ctl, irq_port);
227 hws[i] = &hw[i];
230 ide_host_add(&d, hws, i, NULL);
233 return 0;
236 module_init(buddha_init);
238 MODULE_LICENSE("GPL");