dm thin metadata: fix __udivdi3 undefined on 32-bit

[linux/fpc-iii.git] / drivers / gpio / gpio-pcf857x.c

/*
 * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders
 *
 * Copyright (C) 2007 David Brownell
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>


static const struct i2c_device_id pcf857x_id[] = {
        { "pcf8574", 8 },
        { "pcf8574a", 8 },
        { "pca8574", 8 },
        { "pca9670", 8 },
        { "pca9672", 8 },
        { "pca9674", 8 },
        { "pcf8575", 16 },
        { "pca8575", 16 },
        { "pca9671", 16 },
        { "pca9673", 16 },
        { "pca9675", 16 },
        { "max7328", 8 },
        { "max7329", 8 },
        { "tca9554", 8 },
        { }
};
MODULE_DEVICE_TABLE(i2c, pcf857x_id);

#ifdef CONFIG_OF
static const struct of_device_id pcf857x_of_table[] = {
        { .compatible = "nxp,pcf8574" },
        { .compatible = "nxp,pcf8574a" },
        { .compatible = "nxp,pca8574" },
        { .compatible = "nxp,pca9670" },
        { .compatible = "nxp,pca9672" },
        { .compatible = "nxp,pca9674" },
        { .compatible = "nxp,pcf8575" },
        { .compatible = "nxp,pca8575" },
        { .compatible = "nxp,pca9671" },
        { .compatible = "nxp,pca9673" },
        { .compatible = "nxp,pca9675" },
        { .compatible = "maxim,max7328" },
        { .compatible = "maxim,max7329" },
        { .compatible = "ti,tca9554" },
        { }
};
MODULE_DEVICE_TABLE(of, pcf857x_of_table);
#endif

/*
 * The pcf857x, pca857x, and pca967x chips only expose one read and one
 * write register.  Writing a "one" bit (to match the reset state) lets
 * that pin be used as an input; it's not an open-drain model, but acts
 * a bit like one.  This is described as "quasi-bidirectional"; read the
 * chip documentation for details.
 *
 * Many other I2C GPIO expander chips (like the pca953x models) have
 * more complex register models and more conventional circuitry using
 * push/pull drivers.  They often use the same 0x20..0x27 addresses as
 * pcf857x parts, making the "legacy" I2C driver model problematic.
 */
struct pcf857x {
        struct gpio_chip        chip;
        struct i2c_client       *client;
        struct mutex            lock;           /* protect 'out' */
        unsigned                out;            /* software latch */
        unsigned                status;         /* current status */
        unsigned int            irq_parent;
        unsigned                irq_enabled;    /* enabled irqs */

        int (*write)(struct i2c_client *client, unsigned data);
        int (*read)(struct i2c_client *client);
};

/*-------------------------------------------------------------------------*/

/* Talk to 8-bit I/O expander */

static int i2c_write_le8(struct i2c_client *client, unsigned data)
{
        return i2c_smbus_write_byte(client, data);
}

static int i2c_read_le8(struct i2c_client *client)
{
        return (int)i2c_smbus_read_byte(client);
}

/* Talk to 16-bit I/O expander */

static int i2c_write_le16(struct i2c_client *client, unsigned word)
{
        u8 buf[2] = { word & 0xff, word >> 8, };
        int status;

        status = i2c_master_send(client, buf, 2);
        return (status < 0) ? status : 0;
}

static int i2c_read_le16(struct i2c_client *client)
{
        u8 buf[2];
        int status;

        status = i2c_master_recv(client, buf, 2);
        if (status < 0)
                return status;
        return (buf[1] << 8) | buf[0];
}

/*-------------------------------------------------------------------------*/

static int pcf857x_input(struct gpio_chip *chip, unsigned offset)
{
        struct pcf857x  *gpio = container_of(chip, struct pcf857x, chip);
        int             status;

        mutex_lock(&gpio->lock);
        gpio->out |= (1 << offset);
        status = gpio->write(gpio->client, gpio->out);
        mutex_unlock(&gpio->lock);

        return status;
}

static int pcf857x_get(struct gpio_chip *chip, unsigned offset)
{
        struct pcf857x  *gpio = container_of(chip, struct pcf857x, chip);
        int             value;

        value = gpio->read(gpio->client);
        return (value < 0) ? 0 : (value & (1 << offset));
}

static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value)
{
        struct pcf857x  *gpio = container_of(chip, struct pcf857x, chip);
        unsigned        bit = 1 << offset;
        int             status;

        mutex_lock(&gpio->lock);
        if (value)
                gpio->out |= bit;
        else
                gpio->out &= ~bit;
        status = gpio->write(gpio->client, gpio->out);
        mutex_unlock(&gpio->lock);

        return status;
}

static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value)
{
        pcf857x_output(chip, offset, value);
}

/*-------------------------------------------------------------------------*/

static irqreturn_t pcf857x_irq(int irq, void *data)
{
        struct pcf857x  *gpio = data;
        unsigned long change, i, status;

        status = gpio->read(gpio->client);

        /*
         * call the interrupt handler iff gpio is used as
         * interrupt source, just to avoid bad irqs
         */
        mutex_lock(&gpio->lock);
        change = (gpio->status ^ status) & gpio->irq_enabled;
        gpio->status = status;
        mutex_unlock(&gpio->lock);

        for_each_set_bit(i, &change, gpio->chip.ngpio)
                handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i));

        return IRQ_HANDLED;
}

/*
 * NOP functions
 */
static void noop(struct irq_data *data) { }

static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
{
        struct pcf857x *gpio = irq_data_get_irq_chip_data(data);

        int error = 0;

        if (gpio->irq_parent) {
                error = irq_set_irq_wake(gpio->irq_parent, on);
                if (error) {
                        dev_dbg(&gpio->client->dev,
                                "irq %u doesn't support irq_set_wake\n",
                                gpio->irq_parent);
                        gpio->irq_parent = 0;
                }
        }
        return error;
}

static void pcf857x_irq_enable(struct irq_data *data)
{
        struct pcf857x *gpio = irq_data_get_irq_chip_data(data);

        gpio->irq_enabled |= (1 << data->hwirq);
}

static void pcf857x_irq_disable(struct irq_data *data)
{
        struct pcf857x *gpio = irq_data_get_irq_chip_data(data);

        gpio->irq_enabled &= ~(1 << data->hwirq);
}

static void pcf857x_irq_bus_lock(struct irq_data *data)
{
        struct pcf857x *gpio = irq_data_get_irq_chip_data(data);

        mutex_lock(&gpio->lock);
}

static void pcf857x_irq_bus_sync_unlock(struct irq_data *data)
{
        struct pcf857x *gpio = irq_data_get_irq_chip_data(data);

        mutex_unlock(&gpio->lock);
}

static struct irq_chip pcf857x_irq_chip = {
        .name           = "pcf857x",
        .irq_enable     = pcf857x_irq_enable,
        .irq_disable    = pcf857x_irq_disable,
        .irq_ack        = noop,
        .irq_mask       = noop,
        .irq_unmask     = noop,
        .irq_set_wake   = pcf857x_irq_set_wake,
        .irq_bus_lock           = pcf857x_irq_bus_lock,
        .irq_bus_sync_unlock    = pcf857x_irq_bus_sync_unlock,
};

/*-------------------------------------------------------------------------*/

static int pcf857x_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
{
        struct pcf857x_platform_data    *pdata = dev_get_platdata(&client->dev);
        struct device_node              *np = client->dev.of_node;
        struct pcf857x                  *gpio;
        unsigned int                    n_latch = 0;
        int                             status;

        if (IS_ENABLED(CONFIG_OF) && np)
                of_property_read_u32(np, "lines-initial-states", &n_latch);
        else if (pdata)
                n_latch = pdata->n_latch;
        else
                dev_dbg(&client->dev, "no platform data\n");

        /* Allocate, initialize, and register this gpio_chip. */
        gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
        if (!gpio)
                return -ENOMEM;

        mutex_init(&gpio->lock);

        gpio->chip.base                 = pdata ? pdata->gpio_base : -1;
        gpio->chip.can_sleep            = true;
        gpio->chip.dev                  = &client->dev;
        gpio->chip.owner                = THIS_MODULE;
        gpio->chip.get                  = pcf857x_get;
        gpio->chip.set                  = pcf857x_set;
        gpio->chip.direction_input      = pcf857x_input;
        gpio->chip.direction_output     = pcf857x_output;
        gpio->chip.ngpio                = id->driver_data;

        /* NOTE:  the OnSemi jlc1562b is also largely compatible with
         * these parts, notably for output.  It has a low-resolution
         * DAC instead of pin change IRQs; and its inputs can be the
         * result of comparators.
         */

        /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f;
         * 9670, 9672, 9764, and 9764a use quite a variety.
         *
         * NOTE: we don't distinguish here between *4 and *4a parts.
         */
        if (gpio->chip.ngpio == 8) {
                gpio->write     = i2c_write_le8;
                gpio->read      = i2c_read_le8;

                if (!i2c_check_functionality(client->adapter,
                                I2C_FUNC_SMBUS_BYTE))
                        status = -EIO;

                /* fail if there's no chip present */
                else
                        status = i2c_smbus_read_byte(client);

        /* '75/'75c addresses are 0x20..0x27, just like the '74;
         * the '75c doesn't have a current source pulling high.
         * 9671, 9673, and 9765 use quite a variety of addresses.
         *
         * NOTE: we don't distinguish here between '75 and '75c parts.
         */
        } else if (gpio->chip.ngpio == 16) {
                gpio->write     = i2c_write_le16;
                gpio->read      = i2c_read_le16;

                if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
                        status = -EIO;

                /* fail if there's no chip present */
                else
                        status = i2c_read_le16(client);

        } else {
                dev_dbg(&client->dev, "unsupported number of gpios\n");
                status = -EINVAL;
        }

        if (status < 0)
                goto fail;

        gpio->chip.label = client->name;

        gpio->client = client;
        i2c_set_clientdata(client, gpio);

        /* NOTE:  these chips have strange "quasi-bidirectional" I/O pins.
         * We can't actually know whether a pin is configured (a) as output
         * and driving the signal low, or (b) as input and reporting a low
         * value ... without knowing the last value written since the chip
         * came out of reset (if any).  We can't read the latched output.
         *
         * In short, the only reliable solution for setting up pin direction
         * is to do it explicitly.  The setup() method can do that, but it
         * may cause transient glitching since it can't know the last value
         * written (some pins may need to be driven low).
         *
         * Using n_latch avoids that trouble.  When left initialized to zero,
         * our software copy of the "latch" then matches the chip's all-ones
         * reset state.  Otherwise it flags pins to be driven low.
         */
        gpio->out = ~n_latch;
        gpio->status = gpio->out;

        status = gpiochip_add(&gpio->chip);
        if (status < 0)
                goto fail;

        /* Enable irqchip if we have an interrupt */
        if (client->irq) {
                status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip,
                                              0, handle_level_irq,
                                              IRQ_TYPE_NONE);
                if (status) {
                        dev_err(&client->dev, "cannot add irqchip\n");
                        goto fail_irq;
                }

                status = devm_request_threaded_irq(&client->dev, client->irq,
                                        NULL, pcf857x_irq, IRQF_ONESHOT |
                                        IRQF_TRIGGER_FALLING | IRQF_SHARED,
                                        dev_name(&client->dev), gpio);
                if (status)
                        goto fail_irq;

                gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
                                             client->irq, NULL);
                gpio->irq_parent = client->irq;
        }

        /* Let platform code set up the GPIOs and their users.
         * Now is the first time anyone could use them.
         */
        if (pdata && pdata->setup) {
                status = pdata->setup(client,
                                gpio->chip.base, gpio->chip.ngpio,
                                pdata->context);
                if (status < 0)
                        dev_warn(&client->dev, "setup --> %d\n", status);
        }

        dev_info(&client->dev, "probed\n");

        return 0;

fail_irq:
        gpiochip_remove(&gpio->chip);

fail:
        dev_dbg(&client->dev, "probe error %d for '%s'\n", status,
                client->name);

        return status;
}

static int pcf857x_remove(struct i2c_client *client)
{
        struct pcf857x_platform_data    *pdata = dev_get_platdata(&client->dev);
        struct pcf857x                  *gpio = i2c_get_clientdata(client);
        int                             status = 0;

        if (pdata && pdata->teardown) {
                status = pdata->teardown(client,
                                gpio->chip.base, gpio->chip.ngpio,
                                pdata->context);
                if (status < 0) {
                        dev_err(&client->dev, "%s --> %d\n",
                                        "teardown", status);
                        return status;
                }
        }

        gpiochip_remove(&gpio->chip);
        return status;
}

static struct i2c_driver pcf857x_driver = {
        .driver = {
                .name   = "pcf857x",
                .owner  = THIS_MODULE,
                .of_match_table = of_match_ptr(pcf857x_of_table),
        },
        .probe  = pcf857x_probe,
        .remove = pcf857x_remove,
        .id_table = pcf857x_id,
};

static int __init pcf857x_init(void)
{
        return i2c_add_driver(&pcf857x_driver);
}
/* register after i2c postcore initcall and before
 * subsys initcalls that may rely on these GPIOs
 */
subsys_initcall(pcf857x_init);

static void __exit pcf857x_exit(void)
{
        i2c_del_driver(&pcf857x_driver);
}
module_exit(pcf857x_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Brownell");