?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
dm thin metadata: fix __udivdi3 undefined on 32-bit
[linux/fpc-iii.git] / drivers / input / misc / cm109.c
blob50a7faa504f722a9157a65b6ef76ccc900b77e0d
1 /*
2 * Driver for the VoIP USB phones with CM109 chipsets.
3 *
4 * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 */
10
11 /*
12 * Tested devices:
13 * - Komunikate KIP1000
14 * - Genius G-talk
15 * - Allied-Telesis Corega USBPH01
16 * - ...
17 *
18 * This driver is based on the yealink.c driver
19 *
20 * Thanks to:
21 * - Authors of yealink.c
22 * - Thomas Reitmayr
23 * - Oliver Neukum for good review comments and code
24 * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
25 * - Dmitry Torokhov for valuable input and review
26 *
27 * Todo:
28 * - Read/write EEPROM
29 */
30
31 #include <linux/kernel.h>
32 #include <linux/init.h>
33 #include <linux/slab.h>
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/rwsem.h>
37 #include <linux/usb/input.h>
38
39 #define DRIVER_VERSION "20080805"
40 #define DRIVER_AUTHOR "Alfred E. Heggestad"
41 #define DRIVER_DESC "CM109 phone driver"
42
43 static char *phone = "kip1000";
44 module_param(phone, charp, S_IRUSR);
45 MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
46
47 enum {
48 /* HID Registers */
49 HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
50 HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
51 HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
52 HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
53 HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
54 HID_OR1 = 0x01, /* GPO - General Purpose Output */
55 HID_OR2 = 0x02, /* Set GPIO to input/output mode */
56 HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
57
58 /* HID_IR0 */
59 RECORD_MUTE = 1 << 3,
60 PLAYBACK_MUTE = 1 << 2,
61 VOLUME_DOWN = 1 << 1,
62 VOLUME_UP = 1 << 0,
63
64 /* HID_OR0 */
65 /* bits 7-6
66 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
67 and SPDIF
68 1: HID_OR0-3 are used as generic HID registers
69 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
70 EEPROM_DATA0-1, EEPROM_CTRL (see Note)
71 3: Reserved
72 */
73 HID_OR_GPO_BUZ_SPDIF = 0 << 6,
74 HID_OR_GENERIC_HID_REG = 1 << 6,
75 HID_OR_MAP_MCU_EEPROM = 2 << 6,
76
77 BUZZER_ON = 1 << 5,
78
79 /* up to 256 normal keys, up to 16 special keys */
80 KEYMAP_SIZE = 256 + 16,
81 };
82
83 /* CM109 protocol packet */
84 struct cm109_ctl_packet {
85 u8 byte[4];
86 } __attribute__ ((packed));
87
88 enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
89
90 /* CM109 device structure */
91 struct cm109_dev {
92 struct input_dev *idev; /* input device */
93 struct usb_device *udev; /* usb device */
94 struct usb_interface *intf;
95
96 /* irq input channel */
97 struct cm109_ctl_packet *irq_data;
98 dma_addr_t irq_dma;
99 struct urb *urb_irq;
100
101 /* control output channel */
102 struct cm109_ctl_packet *ctl_data;
103 dma_addr_t ctl_dma;
104 struct usb_ctrlrequest *ctl_req;
105 struct urb *urb_ctl;
106 /*
107 * The 3 bitfields below are protected by ctl_submit_lock.
108 * They have to be separate since they are accessed from IRQ
109 * context.
110 */
111 unsigned irq_urb_pending:1; /* irq_urb is in flight */
112 unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
113 unsigned buzzer_pending:1; /* need to issue buzz command */
114 spinlock_t ctl_submit_lock;
115
116 unsigned char buzzer_state; /* on/off */
117
118 /* flags */
119 unsigned open:1;
120 unsigned resetting:1;
121 unsigned shutdown:1;
122
123 /* This mutex protects writes to the above flags */
124 struct mutex pm_mutex;
125
126 unsigned short keymap[KEYMAP_SIZE];
127
128 char phys[64]; /* physical device path */
129 int key_code; /* last reported key */
130 int keybit; /* 0=new scan 1,2,4,8=scan columns */
131 u8 gpi; /* Cached value of GPI (high nibble) */
132 };
133
134 /******************************************************************************
135 * CM109 key interface
136 *****************************************************************************/
137
138 static unsigned short special_keymap(int code)
139 {
140 if (code > 0xff) {
141 switch (code - 0xff) {
142 case RECORD_MUTE: return KEY_MUTE;
143 case PLAYBACK_MUTE: return KEY_MUTE;
144 case VOLUME_DOWN: return KEY_VOLUMEDOWN;
145 case VOLUME_UP: return KEY_VOLUMEUP;
146 }
147 }
148 return KEY_RESERVED;
149 }
150
151 /* Map device buttons to internal key events.
152 *
153 * The "up" and "down" keys, are symbolised by arrows on the button.
154 * The "pickup" and "hangup" keys are symbolised by a green and red phone
155 * on the button.
156
157 Komunikate KIP1000 Keyboard Matrix
158
159 -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
160 | | | |
161 <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
162 | | | |
163 END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
164 | | | |
165 OK -- * -- 0 -- # --> GPI pin 7 (0x80)
166 | | | |
167
168 /|\ /|\ /|\ /|\
169 | | | |
170 GPO
171 pin: 3 2 1 0
172 0x8 0x4 0x2 0x1
173
174 */
175 static unsigned short keymap_kip1000(int scancode)
176 {
177 switch (scancode) { /* phone key: */
178 case 0x82: return KEY_NUMERIC_0; /* 0 */
179 case 0x14: return KEY_NUMERIC_1; /* 1 */
180 case 0x12: return KEY_NUMERIC_2; /* 2 */
181 case 0x11: return KEY_NUMERIC_3; /* 3 */
182 case 0x24: return KEY_NUMERIC_4; /* 4 */
183 case 0x22: return KEY_NUMERIC_5; /* 5 */
184 case 0x21: return KEY_NUMERIC_6; /* 6 */
185 case 0x44: return KEY_NUMERIC_7; /* 7 */
186 case 0x42: return KEY_NUMERIC_8; /* 8 */
187 case 0x41: return KEY_NUMERIC_9; /* 9 */
188 case 0x81: return KEY_NUMERIC_POUND; /* # */
189 case 0x84: return KEY_NUMERIC_STAR; /* * */
190 case 0x88: return KEY_ENTER; /* pickup */
191 case 0x48: return KEY_ESC; /* hangup */
192 case 0x28: return KEY_LEFT; /* IN */
193 case 0x18: return KEY_RIGHT; /* OUT */
194 default: return special_keymap(scancode);
195 }
196 }
197
198 /*
199 Contributed by Shaun Jackman <sjackman@gmail.com>
200
201 Genius G-Talk keyboard matrix
202 0 1 2 3
203 4: 0 4 8 Talk
204 5: 1 5 9 End
205 6: 2 6 # Up
206 7: 3 7 * Down
207 */
208 static unsigned short keymap_gtalk(int scancode)
209 {
210 switch (scancode) {
211 case 0x11: return KEY_NUMERIC_0;
212 case 0x21: return KEY_NUMERIC_1;
213 case 0x41: return KEY_NUMERIC_2;
214 case 0x81: return KEY_NUMERIC_3;
215 case 0x12: return KEY_NUMERIC_4;
216 case 0x22: return KEY_NUMERIC_5;
217 case 0x42: return KEY_NUMERIC_6;
218 case 0x82: return KEY_NUMERIC_7;
219 case 0x14: return KEY_NUMERIC_8;
220 case 0x24: return KEY_NUMERIC_9;
221 case 0x44: return KEY_NUMERIC_POUND; /* # */
222 case 0x84: return KEY_NUMERIC_STAR; /* * */
223 case 0x18: return KEY_ENTER; /* Talk (green handset) */
224 case 0x28: return KEY_ESC; /* End (red handset) */
225 case 0x48: return KEY_UP; /* Menu up (rocker switch) */
226 case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
227 default: return special_keymap(scancode);
228 }
229 }
230
231 /*
232 * Keymap for Allied-Telesis Corega USBPH01
233 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
234 *
235 * Contributed by july@nat.bg
236 */
237 static unsigned short keymap_usbph01(int scancode)
238 {
239 switch (scancode) {
240 case 0x11: return KEY_NUMERIC_0; /* 0 */
241 case 0x21: return KEY_NUMERIC_1; /* 1 */
242 case 0x41: return KEY_NUMERIC_2; /* 2 */
243 case 0x81: return KEY_NUMERIC_3; /* 3 */
244 case 0x12: return KEY_NUMERIC_4; /* 4 */
245 case 0x22: return KEY_NUMERIC_5; /* 5 */
246 case 0x42: return KEY_NUMERIC_6; /* 6 */
247 case 0x82: return KEY_NUMERIC_7; /* 7 */
248 case 0x14: return KEY_NUMERIC_8; /* 8 */
249 case 0x24: return KEY_NUMERIC_9; /* 9 */
250 case 0x44: return KEY_NUMERIC_POUND; /* # */
251 case 0x84: return KEY_NUMERIC_STAR; /* * */
252 case 0x18: return KEY_ENTER; /* pickup */
253 case 0x28: return KEY_ESC; /* hangup */
254 case 0x48: return KEY_LEFT; /* IN */
255 case 0x88: return KEY_RIGHT; /* OUT */
256 default: return special_keymap(scancode);
257 }
258 }
259
260 /*
261 * Keymap for ATCom AU-100
262 * http://www.atcom.cn/products.html
263 * http://www.packetizer.com/products/au100/
264 * http://www.voip-info.org/wiki/view/AU-100
265 *
266 * Contributed by daniel@gimpelevich.san-francisco.ca.us
267 */
268 static unsigned short keymap_atcom(int scancode)
269 {
270 switch (scancode) { /* phone key: */
271 case 0x82: return KEY_NUMERIC_0; /* 0 */
272 case 0x11: return KEY_NUMERIC_1; /* 1 */
273 case 0x12: return KEY_NUMERIC_2; /* 2 */
274 case 0x14: return KEY_NUMERIC_3; /* 3 */
275 case 0x21: return KEY_NUMERIC_4; /* 4 */
276 case 0x22: return KEY_NUMERIC_5; /* 5 */
277 case 0x24: return KEY_NUMERIC_6; /* 6 */
278 case 0x41: return KEY_NUMERIC_7; /* 7 */
279 case 0x42: return KEY_NUMERIC_8; /* 8 */
280 case 0x44: return KEY_NUMERIC_9; /* 9 */
281 case 0x84: return KEY_NUMERIC_POUND; /* # */
282 case 0x81: return KEY_NUMERIC_STAR; /* * */
283 case 0x18: return KEY_ENTER; /* pickup */
284 case 0x28: return KEY_ESC; /* hangup */
285 case 0x48: return KEY_LEFT; /* left arrow */
286 case 0x88: return KEY_RIGHT; /* right arrow */
287 default: return special_keymap(scancode);
288 }
289 }
290
291 static unsigned short (*keymap)(int) = keymap_kip1000;
292
293 /*
294 * Completes a request by converting the data into events for the
295 * input subsystem.
296 */
297 static void report_key(struct cm109_dev *dev, int key)
298 {
299 struct input_dev *idev = dev->idev;
300
301 if (dev->key_code >= 0) {
302 /* old key up */
303 input_report_key(idev, dev->key_code, 0);
304 }
305
306 dev->key_code = key;
307 if (key >= 0) {
308 /* new valid key */
309 input_report_key(idev, key, 1);
310 }
311
312 input_sync(idev);
313 }
314
315 /******************************************************************************
316 * CM109 usb communication interface
317 *****************************************************************************/
318
319 static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
320 {
321 int error;
322
323 if (dev->buzzer_state)
324 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
325 else
326 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
327
328 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
329 if (error)
330 dev_err(&dev->intf->dev,
331 "%s: usb_submit_urb (urb_ctl) failed %d\n",
332 __func__, error);
333 }
334
335 /*
336 * IRQ handler
337 */
338 static void cm109_urb_irq_callback(struct urb *urb)
339 {
340 struct cm109_dev *dev = urb->context;
341 const int status = urb->status;
342 int error;
343
344 dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
345 dev->irq_data->byte[0],
346 dev->irq_data->byte[1],
347 dev->irq_data->byte[2],
348 dev->irq_data->byte[3],
349 dev->keybit);
350
351 if (status) {
352 if (status == -ESHUTDOWN)
353 return;
354 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
355 __func__, status);
356 goto out;
357 }
358
359 /* Special keys */
360 if (dev->irq_data->byte[HID_IR0] & 0x0f) {
361 const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
362 report_key(dev, dev->keymap[0xff + code]);
363 }
364
365 /* Scan key column */
366 if (dev->keybit == 0xf) {
367
368 /* Any changes ? */
369 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
370 goto out;
371
372 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
373 dev->keybit = 0x1;
374 } else {
375 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
376
377 dev->keybit <<= 1;
378 if (dev->keybit > 0x8)
379 dev->keybit = 0xf;
380 }
381
382 out:
383
384 spin_lock(&dev->ctl_submit_lock);
385
386 dev->irq_urb_pending = 0;
387
388 if (likely(!dev->shutdown)) {
389
390 if (dev->buzzer_state)
391 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
392 else
393 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
394
395 dev->ctl_data->byte[HID_OR1] = dev->keybit;
396 dev->ctl_data->byte[HID_OR2] = dev->keybit;
397
398 dev->buzzer_pending = 0;
399 dev->ctl_urb_pending = 1;
400
401 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
402 if (error)
403 dev_err(&dev->intf->dev,
404 "%s: usb_submit_urb (urb_ctl) failed %d\n",
405 __func__, error);
406 }
407
408 spin_unlock(&dev->ctl_submit_lock);
409 }
410
411 static void cm109_urb_ctl_callback(struct urb *urb)
412 {
413 struct cm109_dev *dev = urb->context;
414 const int status = urb->status;
415 int error;
416
417 dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
418 dev->ctl_data->byte[0],
419 dev->ctl_data->byte[1],
420 dev->ctl_data->byte[2],
421 dev->ctl_data->byte[3]);
422
423 if (status) {
424 if (status == -ESHUTDOWN)
425 return;
426 dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
427 __func__, status);
428 }
429
430 spin_lock(&dev->ctl_submit_lock);
431
432 dev->ctl_urb_pending = 0;
433
434 if (likely(!dev->shutdown)) {
435
436 if (dev->buzzer_pending || status) {
437 dev->buzzer_pending = 0;
438 dev->ctl_urb_pending = 1;
439 cm109_submit_buzz_toggle(dev);
440 } else if (likely(!dev->irq_urb_pending)) {
441 /* ask for key data */
442 dev->irq_urb_pending = 1;
443 error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
444 if (error)
445 dev_err(&dev->intf->dev,
446 "%s: usb_submit_urb (urb_irq) failed %d\n",
447 __func__, error);
448 }
449 }
450
451 spin_unlock(&dev->ctl_submit_lock);
452 }
453
454 static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
455 {
456 unsigned long flags;
457
458 spin_lock_irqsave(&dev->ctl_submit_lock, flags);
459
460 if (dev->ctl_urb_pending) {
461 /* URB completion will resubmit */
462 dev->buzzer_pending = 1;
463 } else {
464 dev->ctl_urb_pending = 1;
465 cm109_submit_buzz_toggle(dev);
466 }
467
468 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
469 }
470
471 static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
472 {
473 int error;
474
475 if (on)
476 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
477 else
478 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
479
480 error = usb_control_msg(dev->udev,
481 usb_sndctrlpipe(dev->udev, 0),
482 dev->ctl_req->bRequest,
483 dev->ctl_req->bRequestType,
484 le16_to_cpu(dev->ctl_req->wValue),
485 le16_to_cpu(dev->ctl_req->wIndex),
486 dev->ctl_data,
487 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
488 if (error < 0 && error != -EINTR)
489 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
490 __func__, error);
491 }
492
493 static void cm109_stop_traffic(struct cm109_dev *dev)
494 {
495 dev->shutdown = 1;
496 /*
497 * Make sure other CPUs see this
498 */
499 smp_wmb();
500
501 usb_kill_urb(dev->urb_ctl);
502 usb_kill_urb(dev->urb_irq);
503
504 cm109_toggle_buzzer_sync(dev, 0);
505
506 dev->shutdown = 0;
507 smp_wmb();
508 }
509
510 static void cm109_restore_state(struct cm109_dev *dev)
511 {
512 if (dev->open) {
513 /*
514 * Restore buzzer state.
515 * This will also kick regular URB submission
516 */
517 cm109_toggle_buzzer_async(dev);
518 }
519 }
520
521 /******************************************************************************
522 * input event interface
523 *****************************************************************************/
524
525 static int cm109_input_open(struct input_dev *idev)
526 {
527 struct cm109_dev *dev = input_get_drvdata(idev);
528 int error;
529
530 error = usb_autopm_get_interface(dev->intf);
531 if (error < 0) {
532 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
533 __func__, error);
534 return error;
535 }
536
537 mutex_lock(&dev->pm_mutex);
538
539 dev->buzzer_state = 0;
540 dev->key_code = -1; /* no keys pressed */
541 dev->keybit = 0xf;
542
543 /* issue INIT */
544 dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
545 dev->ctl_data->byte[HID_OR1] = dev->keybit;
546 dev->ctl_data->byte[HID_OR2] = dev->keybit;
547 dev->ctl_data->byte[HID_OR3] = 0x00;
548
549 error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
550 if (error)
551 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
552 __func__, error);
553 else
554 dev->open = 1;
555
556 mutex_unlock(&dev->pm_mutex);
557
558 if (error)
559 usb_autopm_put_interface(dev->intf);
560
561 return error;
562 }
563
564 static void cm109_input_close(struct input_dev *idev)
565 {
566 struct cm109_dev *dev = input_get_drvdata(idev);
567
568 mutex_lock(&dev->pm_mutex);
569
570 /*
571 * Once we are here event delivery is stopped so we
572 * don't need to worry about someone starting buzzer
573 * again
574 */
575 cm109_stop_traffic(dev);
576 dev->open = 0;
577
578 mutex_unlock(&dev->pm_mutex);
579
580 usb_autopm_put_interface(dev->intf);
581 }
582
583 static int cm109_input_ev(struct input_dev *idev, unsigned int type,
584 unsigned int code, int value)
585 {
586 struct cm109_dev *dev = input_get_drvdata(idev);
587
588 dev_dbg(&dev->intf->dev,
589 "input_ev: type=%u code=%u value=%d\n", type, code, value);
590
591 if (type != EV_SND)
592 return -EINVAL;
593
594 switch (code) {
595 case SND_TONE:
596 case SND_BELL:
597 dev->buzzer_state = !!value;
598 if (!dev->resetting)
599 cm109_toggle_buzzer_async(dev);
600 return 0;
601
602 default:
603 return -EINVAL;
604 }
605 }
606
607
608 /******************************************************************************
609 * Linux interface and usb initialisation
610 *****************************************************************************/
611
612 struct driver_info {
613 char *name;
614 };
615
616 static const struct driver_info info_cm109 = {
617 .name = "CM109 USB driver",
618 };
619
620 enum {
621 VENDOR_ID = 0x0d8c, /* C-Media Electronics */
622 PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
623 };
624
625 /* table of devices that work with this driver */
626 static const struct usb_device_id cm109_usb_table[] = {
627 {
628 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
629 USB_DEVICE_ID_MATCH_INT_INFO,
630 .idVendor = VENDOR_ID,
631 .idProduct = PRODUCT_ID_CM109,
632 .bInterfaceClass = USB_CLASS_HID,
633 .bInterfaceSubClass = 0,
634 .bInterfaceProtocol = 0,
635 .driver_info = (kernel_ulong_t) &info_cm109
636 },
637 /* you can add more devices here with product ID 0x0008 - 0x000f */
638 { }
639 };
640
641 static void cm109_usb_cleanup(struct cm109_dev *dev)
642 {
643 kfree(dev->ctl_req);
644 if (dev->ctl_data)
645 usb_free_coherent(dev->udev, USB_PKT_LEN,
646 dev->ctl_data, dev->ctl_dma);
647 if (dev->irq_data)
648 usb_free_coherent(dev->udev, USB_PKT_LEN,
649 dev->irq_data, dev->irq_dma);
650
651 usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
652 usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
653 kfree(dev);
654 }
655
656 static void cm109_usb_disconnect(struct usb_interface *interface)
657 {
658 struct cm109_dev *dev = usb_get_intfdata(interface);
659
660 usb_set_intfdata(interface, NULL);
661 input_unregister_device(dev->idev);
662 cm109_usb_cleanup(dev);
663 }
664
665 static int cm109_usb_probe(struct usb_interface *intf,
666 const struct usb_device_id *id)
667 {
668 struct usb_device *udev = interface_to_usbdev(intf);
669 struct driver_info *nfo = (struct driver_info *)id->driver_info;
670 struct usb_host_interface *interface;
671 struct usb_endpoint_descriptor *endpoint;
672 struct cm109_dev *dev;
673 struct input_dev *input_dev = NULL;
674 int ret, pipe, i;
675 int error = -ENOMEM;
676
677 interface = intf->cur_altsetting;
678
679 if (interface->desc.bNumEndpoints < 1)
680 return -ENODEV;
681
682 endpoint = &interface->endpoint[0].desc;
683
684 if (!usb_endpoint_is_int_in(endpoint))
685 return -ENODEV;
686
687 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
688 if (!dev)
689 return -ENOMEM;
690
691 spin_lock_init(&dev->ctl_submit_lock);
692 mutex_init(&dev->pm_mutex);
693
694 dev->udev = udev;
695 dev->intf = intf;
696
697 dev->idev = input_dev = input_allocate_device();
698 if (!input_dev)
699 goto err_out;
700
701 /* allocate usb buffers */
702 dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
703 GFP_KERNEL, &dev->irq_dma);
704 if (!dev->irq_data)
705 goto err_out;
706
707 dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
708 GFP_KERNEL, &dev->ctl_dma);
709 if (!dev->ctl_data)
710 goto err_out;
711
712 dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
713 if (!dev->ctl_req)
714 goto err_out;
715
716 /* allocate urb structures */
717 dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
718 if (!dev->urb_irq)
719 goto err_out;
720
721 dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
722 if (!dev->urb_ctl)
723 goto err_out;
724
725 /* get a handle to the interrupt data pipe */
726 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
727 ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
728 if (ret != USB_PKT_LEN)
729 dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
730 ret, USB_PKT_LEN);
731
732 /* initialise irq urb */
733 usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
734 USB_PKT_LEN,
735 cm109_urb_irq_callback, dev, endpoint->bInterval);
736 dev->urb_irq->transfer_dma = dev->irq_dma;
737 dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
738 dev->urb_irq->dev = udev;
739
740 /* initialise ctl urb */
741 dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
742 USB_DIR_OUT;
743 dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
744 dev->ctl_req->wValue = cpu_to_le16(0x200);
745 dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
746 dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
747
748 usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
749 (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
750 cm109_urb_ctl_callback, dev);
751 dev->urb_ctl->transfer_dma = dev->ctl_dma;
752 dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
753 dev->urb_ctl->dev = udev;
754
755 /* find out the physical bus location */
756 usb_make_path(udev, dev->phys, sizeof(dev->phys));
757 strlcat(dev->phys, "/input0", sizeof(dev->phys));
758
759 /* register settings for the input device */
760 input_dev->name = nfo->name;
761 input_dev->phys = dev->phys;
762 usb_to_input_id(udev, &input_dev->id);
763 input_dev->dev.parent = &intf->dev;
764
765 input_set_drvdata(input_dev, dev);
766 input_dev->open = cm109_input_open;
767 input_dev->close = cm109_input_close;
768 input_dev->event = cm109_input_ev;
769
770 input_dev->keycode = dev->keymap;
771 input_dev->keycodesize = sizeof(unsigned char);
772 input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
773
774 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
775 input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
776
777 /* register available key events */
778 for (i = 0; i < KEYMAP_SIZE; i++) {
779 unsigned short k = keymap(i);
780 dev->keymap[i] = k;
781 __set_bit(k, input_dev->keybit);
782 }
783 __clear_bit(KEY_RESERVED, input_dev->keybit);
784
785 error = input_register_device(dev->idev);
786 if (error)
787 goto err_out;
788
789 usb_set_intfdata(intf, dev);
790
791 return 0;
792
793 err_out:
794 input_free_device(input_dev);
795 cm109_usb_cleanup(dev);
796 return error;
797 }
798
799 static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
800 {
801 struct cm109_dev *dev = usb_get_intfdata(intf);
802
803 dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
804
805 mutex_lock(&dev->pm_mutex);
806 cm109_stop_traffic(dev);
807 mutex_unlock(&dev->pm_mutex);
808
809 return 0;
810 }
811
812 static int cm109_usb_resume(struct usb_interface *intf)
813 {
814 struct cm109_dev *dev = usb_get_intfdata(intf);
815
816 dev_info(&intf->dev, "cm109: usb_resume\n");
817
818 mutex_lock(&dev->pm_mutex);
819 cm109_restore_state(dev);
820 mutex_unlock(&dev->pm_mutex);
821
822 return 0;
823 }
824
825 static int cm109_usb_pre_reset(struct usb_interface *intf)
826 {
827 struct cm109_dev *dev = usb_get_intfdata(intf);
828
829 mutex_lock(&dev->pm_mutex);
830
831 /*
832 * Make sure input events don't try to toggle buzzer
833 * while we are resetting
834 */
835 dev->resetting = 1;
836 smp_wmb();
837
838 cm109_stop_traffic(dev);
839
840 return 0;
841 }
842
843 static int cm109_usb_post_reset(struct usb_interface *intf)
844 {
845 struct cm109_dev *dev = usb_get_intfdata(intf);
846
847 dev->resetting = 0;
848 smp_wmb();
849
850 cm109_restore_state(dev);
851
852 mutex_unlock(&dev->pm_mutex);
853
854 return 0;
855 }
856
857 static struct usb_driver cm109_driver = {
858 .name = "cm109",
859 .probe = cm109_usb_probe,
860 .disconnect = cm109_usb_disconnect,
861 .suspend = cm109_usb_suspend,
862 .resume = cm109_usb_resume,
863 .reset_resume = cm109_usb_resume,
864 .pre_reset = cm109_usb_pre_reset,
865 .post_reset = cm109_usb_post_reset,
866 .id_table = cm109_usb_table,
867 .supports_autosuspend = 1,
868 };
869
870 static int __init cm109_select_keymap(void)
871 {
872 /* Load the phone keymap */
873 if (!strcasecmp(phone, "kip1000")) {
874 keymap = keymap_kip1000;
875 printk(KERN_INFO KBUILD_MODNAME ": "
876 "Keymap for Komunikate KIP1000 phone loaded\n");
877 } else if (!strcasecmp(phone, "gtalk")) {
878 keymap = keymap_gtalk;
879 printk(KERN_INFO KBUILD_MODNAME ": "
880 "Keymap for Genius G-talk phone loaded\n");
881 } else if (!strcasecmp(phone, "usbph01")) {
882 keymap = keymap_usbph01;
883 printk(KERN_INFO KBUILD_MODNAME ": "
884 "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
885 } else if (!strcasecmp(phone, "atcom")) {
886 keymap = keymap_atcom;
887 printk(KERN_INFO KBUILD_MODNAME ": "
888 "Keymap for ATCom AU-100 phone loaded\n");
889 } else {
890 printk(KERN_ERR KBUILD_MODNAME ": "
891 "Unsupported phone: %s\n", phone);
892 return -EINVAL;
893 }
894
895 return 0;
896 }
897
898 static int __init cm109_init(void)
899 {
900 int err;
901
902 err = cm109_select_keymap();
903 if (err)
904 return err;
905
906 err = usb_register(&cm109_driver);
907 if (err)
908 return err;
909
910 printk(KERN_INFO KBUILD_MODNAME ": "
911 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
912
913 return 0;
914 }
915
916 static void __exit cm109_exit(void)
917 {
918 usb_deregister(&cm109_driver);
919 }
920
921 module_init(cm109_init);
922 module_exit(cm109_exit);
923
924 MODULE_DEVICE_TABLE(usb, cm109_usb_table);
925
926 MODULE_AUTHOR(DRIVER_AUTHOR);
927 MODULE_DESCRIPTION(DRIVER_DESC);
928 MODULE_LICENSE("GPL");
Linux with added FPC-III support