dm thin metadata: fix __udivdi3 undefined on 32-bit

[linux/fpc-iii.git] / drivers / md / bcache / alloc.c

/*
 * Primary bucket allocation code
 *
 * Copyright 2012 Google, Inc.
 *
 * Allocation in bcache is done in terms of buckets:
 *
 * Each bucket has associated an 8 bit gen; this gen corresponds to the gen in
 * btree pointers - they must match for the pointer to be considered valid.
 *
 * Thus (assuming a bucket has no dirty data or metadata in it) we can reuse a
 * bucket simply by incrementing its gen.
 *
 * The gens (along with the priorities; it's really the gens are important but
 * the code is named as if it's the priorities) are written in an arbitrary list
 * of buckets on disk, with a pointer to them in the journal header.
 *
 * When we invalidate a bucket, we have to write its new gen to disk and wait
 * for that write to complete before we use it - otherwise after a crash we
 * could have pointers that appeared to be good but pointed to data that had
 * been overwritten.
 *
 * Since the gens and priorities are all stored contiguously on disk, we can
 * batch this up: We fill up the free_inc list with freshly invalidated buckets,
 * call prio_write(), and when prio_write() finishes we pull buckets off the
 * free_inc list and optionally discard them.
 *
 * free_inc isn't the only freelist - if it was, we'd often to sleep while
 * priorities and gens were being written before we could allocate. c->free is a
 * smaller freelist, and buckets on that list are always ready to be used.
 *
 * If we've got discards enabled, that happens when a bucket moves from the
 * free_inc list to the free list.
 *
 * There is another freelist, because sometimes we have buckets that we know
 * have nothing pointing into them - these we can reuse without waiting for
 * priorities to be rewritten. These come from freed btree nodes and buckets
 * that garbage collection discovered no longer had valid keys pointing into
 * them (because they were overwritten). That's the unused list - buckets on the
 * unused list move to the free list, optionally being discarded in the process.
 *
 * It's also important to ensure that gens don't wrap around - with respect to
 * either the oldest gen in the btree or the gen on disk. This is quite
 * difficult to do in practice, but we explicitly guard against it anyways - if
 * a bucket is in danger of wrapping around we simply skip invalidating it that
 * time around, and we garbage collect or rewrite the priorities sooner than we
 * would have otherwise.
 *
 * bch_bucket_alloc() allocates a single bucket from a specific cache.
 *
 * bch_bucket_alloc_set() allocates one or more buckets from different caches
 * out of a cache set.
 *
 * free_some_buckets() drives all the processes described above. It's called
 * from bch_bucket_alloc() and a few other places that need to make sure free
 * buckets are ready.
 *
 * invalidate_buckets_(lru|fifo)() find buckets that are available to be
 * invalidated, and then invalidate them and stick them on the free_inc list -
 * in either lru or fifo order.
 */

#include "bcache.h"
#include "btree.h"

#include <linux/blkdev.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/random.h>
#include <trace/events/bcache.h>

/* Bucket heap / gen */

uint8_t bch_inc_gen(struct cache *ca, struct bucket *b)
{
        uint8_t ret = ++b->gen;

        ca->set->need_gc = max(ca->set->need_gc, bucket_gc_gen(b));
        WARN_ON_ONCE(ca->set->need_gc > BUCKET_GC_GEN_MAX);

        return ret;
}

void bch_rescale_priorities(struct cache_set *c, int sectors)
{
        struct cache *ca;
        struct bucket *b;
        unsigned next = c->nbuckets * c->sb.bucket_size / 1024;
        unsigned i;
        int r;

        atomic_sub(sectors, &c->rescale);

        do {
                r = atomic_read(&c->rescale);

                if (r >= 0)
                        return;
        } while (atomic_cmpxchg(&c->rescale, r, r + next) != r);

        mutex_lock(&c->bucket_lock);

        c->min_prio = USHRT_MAX;

        for_each_cache(ca, c, i)
                for_each_bucket(b, ca)
                        if (b->prio &&
                            b->prio != BTREE_PRIO &&
                            !atomic_read(&b->pin)) {
                                b->prio--;
                                c->min_prio = min(c->min_prio, b->prio);
                        }

        mutex_unlock(&c->bucket_lock);
}

/*
 * Background allocation thread: scans for buckets to be invalidated,
 * invalidates them, rewrites prios/gens (marking them as invalidated on disk),
 * then optionally issues discard commands to the newly free buckets, then puts
 * them on the various freelists.
 */

static inline bool can_inc_bucket_gen(struct bucket *b)
{
        return bucket_gc_gen(b) < BUCKET_GC_GEN_MAX;
}

bool bch_can_invalidate_bucket(struct cache *ca, struct bucket *b)
{
        BUG_ON(!ca->set->gc_mark_valid);

        return (!GC_MARK(b) ||
                GC_MARK(b) == GC_MARK_RECLAIMABLE) &&
                !atomic_read(&b->pin) &&
                can_inc_bucket_gen(b);
}

void __bch_invalidate_one_bucket(struct cache *ca, struct bucket *b)
{
        lockdep_assert_held(&ca->set->bucket_lock);
        BUG_ON(GC_MARK(b) && GC_MARK(b) != GC_MARK_RECLAIMABLE);

        if (GC_SECTORS_USED(b))
                trace_bcache_invalidate(ca, b - ca->buckets);

        bch_inc_gen(ca, b);
        b->prio = INITIAL_PRIO;
        atomic_inc(&b->pin);
}

static void bch_invalidate_one_bucket(struct cache *ca, struct bucket *b)
{
        __bch_invalidate_one_bucket(ca, b);

        fifo_push(&ca->free_inc, b - ca->buckets);
}

/*
 * Determines what order we're going to reuse buckets, smallest bucket_prio()
 * first: we also take into account the number of sectors of live data in that
 * bucket, and in order for that multiply to make sense we have to scale bucket
 *
 * Thus, we scale the bucket priorities so that the bucket with the smallest
 * prio is worth 1/8th of what INITIAL_PRIO is worth.
 */

#define bucket_prio(b)                                                  \
({                                                                      \
        unsigned min_prio = (INITIAL_PRIO - ca->set->min_prio) / 8;     \
                                                                        \
        (b->prio - ca->set->min_prio + min_prio) * GC_SECTORS_USED(b);  \
})

#define bucket_max_cmp(l, r)    (bucket_prio(l) < bucket_prio(r))
#define bucket_min_cmp(l, r)    (bucket_prio(l) > bucket_prio(r))

static void invalidate_buckets_lru(struct cache *ca)
{
        struct bucket *b;
        ssize_t i;

        ca->heap.used = 0;

        for_each_bucket(b, ca) {
                if (!bch_can_invalidate_bucket(ca, b))
                        continue;

                if (!heap_full(&ca->heap))
                        heap_add(&ca->heap, b, bucket_max_cmp);
                else if (bucket_max_cmp(b, heap_peek(&ca->heap))) {
                        ca->heap.data[0] = b;
                        heap_sift(&ca->heap, 0, bucket_max_cmp);
                }
        }

        for (i = ca->heap.used / 2 - 1; i >= 0; --i)
                heap_sift(&ca->heap, i, bucket_min_cmp);

        while (!fifo_full(&ca->free_inc)) {
                if (!heap_pop(&ca->heap, b, bucket_min_cmp)) {
                        /*
                         * We don't want to be calling invalidate_buckets()
                         * multiple times when it can't do anything
                         */
                        ca->invalidate_needs_gc = 1;
                        wake_up_gc(ca->set);
                        return;
                }

                bch_invalidate_one_bucket(ca, b);
        }
}

static void invalidate_buckets_fifo(struct cache *ca)
{
        struct bucket *b;
        size_t checked = 0;

        while (!fifo_full(&ca->free_inc)) {
                if (ca->fifo_last_bucket <  ca->sb.first_bucket ||
                    ca->fifo_last_bucket >= ca->sb.nbuckets)
                        ca->fifo_last_bucket = ca->sb.first_bucket;

                b = ca->buckets + ca->fifo_last_bucket++;

                if (bch_can_invalidate_bucket(ca, b))
                        bch_invalidate_one_bucket(ca, b);

                if (++checked >= ca->sb.nbuckets) {
                        ca->invalidate_needs_gc = 1;
                        wake_up_gc(ca->set);
                        return;
                }
        }
}

static void invalidate_buckets_random(struct cache *ca)
{
        struct bucket *b;
        size_t checked = 0;

        while (!fifo_full(&ca->free_inc)) {
                size_t n;
                get_random_bytes(&n, sizeof(n));

                n %= (size_t) (ca->sb.nbuckets - ca->sb.first_bucket);
                n += ca->sb.first_bucket;

                b = ca->buckets + n;

                if (bch_can_invalidate_bucket(ca, b))
                        bch_invalidate_one_bucket(ca, b);

                if (++checked >= ca->sb.nbuckets / 2) {
                        ca->invalidate_needs_gc = 1;
                        wake_up_gc(ca->set);
                        return;
                }
        }
}

static void invalidate_buckets(struct cache *ca)
{
        BUG_ON(ca->invalidate_needs_gc);

        switch (CACHE_REPLACEMENT(&ca->sb)) {
        case CACHE_REPLACEMENT_LRU:
                invalidate_buckets_lru(ca);
                break;
        case CACHE_REPLACEMENT_FIFO:
                invalidate_buckets_fifo(ca);
                break;
        case CACHE_REPLACEMENT_RANDOM:
                invalidate_buckets_random(ca);
                break;
        }
}

#define allocator_wait(ca, cond)                                        \
do {                                                                    \
        while (1) {                                                     \
                set_current_state(TASK_INTERRUPTIBLE);                  \
                if (cond)                                               \
                        break;                                          \
                                                                        \
                mutex_unlock(&(ca)->set->bucket_lock);                  \
                if (kthread_should_stop()) {                            \
                        set_current_state(TASK_RUNNING);                \
                        return 0;                                       \
                }                                                       \
                                                                        \
                try_to_freeze();                                        \
                schedule();                                             \
                mutex_lock(&(ca)->set->bucket_lock);                    \
        }                                                               \
        __set_current_state(TASK_RUNNING);                              \
} while (0)

static int bch_allocator_push(struct cache *ca, long bucket)
{
        unsigned i;

        /* Prios/gens are actually the most important reserve */
        if (fifo_push(&ca->free[RESERVE_PRIO], bucket))
                return true;

        for (i = 0; i < RESERVE_NR; i++)
                if (fifo_push(&ca->free[i], bucket))
                        return true;

        return false;
}

static int bch_allocator_thread(void *arg)
{
        struct cache *ca = arg;

        mutex_lock(&ca->set->bucket_lock);

        while (1) {
                /*
                 * First, we pull buckets off of the unused and free_inc lists,
                 * possibly issue discards to them, then we add the bucket to
                 * the free list:
                 */
                while (!fifo_empty(&ca->free_inc)) {
                        long bucket;

                        fifo_pop(&ca->free_inc, bucket);

                        if (ca->discard) {
                                mutex_unlock(&ca->set->bucket_lock);
                                blkdev_issue_discard(ca->bdev,
                                        bucket_to_sector(ca->set, bucket),
                                        ca->sb.bucket_size, GFP_KERNEL, 0);
                                mutex_lock(&ca->set->bucket_lock);
                        }

                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                        wake_up(&ca->set->btree_cache_wait);
                        wake_up(&ca->set->bucket_wait);
                }

                /*
                 * We've run out of free buckets, we need to find some buckets
                 * we can invalidate. First, invalidate them in memory and add
                 * them to the free_inc list:
                 */

retry_invalidate:
                allocator_wait(ca, ca->set->gc_mark_valid &&
                               !ca->invalidate_needs_gc);
                invalidate_buckets(ca);

                /*
                 * Now, we write their new gens to disk so we can start writing
                 * new stuff to them:
                 */
                allocator_wait(ca, !atomic_read(&ca->set->prio_blocked));
                if (CACHE_SYNC(&ca->set->sb)) {
                        /*
                         * This could deadlock if an allocation with a btree
                         * node locked ever blocked - having the btree node
                         * locked would block garbage collection, but here we're
                         * waiting on garbage collection before we invalidate
                         * and free anything.
                         *
                         * But this should be safe since the btree code always
                         * uses btree_check_reserve() before allocating now, and
                         * if it fails it blocks without btree nodes locked.
                         */
                        if (!fifo_full(&ca->free_inc))
                                goto retry_invalidate;

                        bch_prio_write(ca);
                }
        }
}

/* Allocation */

long bch_bucket_alloc(struct cache *ca, unsigned reserve, bool wait)
{
        DEFINE_WAIT(w);
        struct bucket *b;
        long r;

        /* fastpath */
        if (fifo_pop(&ca->free[RESERVE_NONE], r) ||
            fifo_pop(&ca->free[reserve], r))
                goto out;

        if (!wait) {
                trace_bcache_alloc_fail(ca, reserve);
                return -1;
        }

        do {
                prepare_to_wait(&ca->set->bucket_wait, &w,
                                TASK_UNINTERRUPTIBLE);

                mutex_unlock(&ca->set->bucket_lock);
                schedule();
                mutex_lock(&ca->set->bucket_lock);
        } while (!fifo_pop(&ca->free[RESERVE_NONE], r) &&
                 !fifo_pop(&ca->free[reserve], r));

        finish_wait(&ca->set->bucket_wait, &w);
out:
        if (ca->alloc_thread)
                wake_up_process(ca->alloc_thread);

        trace_bcache_alloc(ca, reserve);

        if (expensive_debug_checks(ca->set)) {
                size_t iter;
                long i;
                unsigned j;

                for (iter = 0; iter < prio_buckets(ca) * 2; iter++)
                        BUG_ON(ca->prio_buckets[iter] == (uint64_t) r);

                for (j = 0; j < RESERVE_NR; j++)
                        fifo_for_each(i, &ca->free[j], iter)
                                BUG_ON(i == r);
                fifo_for_each(i, &ca->free_inc, iter)
                        BUG_ON(i == r);
        }

        b = ca->buckets + r;

        BUG_ON(atomic_read(&b->pin) != 1);

        SET_GC_SECTORS_USED(b, ca->sb.bucket_size);

        if (reserve <= RESERVE_PRIO) {
                SET_GC_MARK(b, GC_MARK_METADATA);
                SET_GC_MOVE(b, 0);
                b->prio = BTREE_PRIO;
        } else {
                SET_GC_MARK(b, GC_MARK_RECLAIMABLE);
                SET_GC_MOVE(b, 0);
                b->prio = INITIAL_PRIO;
        }

        return r;
}

void __bch_bucket_free(struct cache *ca, struct bucket *b)
{
        SET_GC_MARK(b, 0);
        SET_GC_SECTORS_USED(b, 0);
}

void bch_bucket_free(struct cache_set *c, struct bkey *k)
{
        unsigned i;

        for (i = 0; i < KEY_PTRS(k); i++)
                __bch_bucket_free(PTR_CACHE(c, k, i),
                                  PTR_BUCKET(c, k, i));
}

int __bch_bucket_alloc_set(struct cache_set *c, unsigned reserve,
                           struct bkey *k, int n, bool wait)
{
        int i;

        lockdep_assert_held(&c->bucket_lock);
        BUG_ON(!n || n > c->caches_loaded || n > 8);

        bkey_init(k);

        /* sort by free space/prio of oldest data in caches */

        for (i = 0; i < n; i++) {
                struct cache *ca = c->cache_by_alloc[i];
                long b = bch_bucket_alloc(ca, reserve, wait);

                if (b == -1)
                        goto err;

                k->ptr[i] = MAKE_PTR(ca->buckets[b].gen,
                                bucket_to_sector(c, b),
                                ca->sb.nr_this_dev);

                SET_KEY_PTRS(k, i + 1);
        }

        return 0;
err:
        bch_bucket_free(c, k);
        bkey_put(c, k);
        return -1;
}

int bch_bucket_alloc_set(struct cache_set *c, unsigned reserve,
                         struct bkey *k, int n, bool wait)
{
        int ret;
        mutex_lock(&c->bucket_lock);
        ret = __bch_bucket_alloc_set(c, reserve, k, n, wait);
        mutex_unlock(&c->bucket_lock);
        return ret;
}

/* Sector allocator */

struct open_bucket {
        struct list_head        list;
        unsigned                last_write_point;
        unsigned                sectors_free;
        BKEY_PADDED(key);
};

/*
 * We keep multiple buckets open for writes, and try to segregate different
 * write streams for better cache utilization: first we try to segregate flash
 * only volume write streams from cached devices, secondly we look for a bucket
 * where the last write to it was sequential with the current write, and
 * failing that we look for a bucket that was last used by the same task.
 *
 * The ideas is if you've got multiple tasks pulling data into the cache at the
 * same time, you'll get better cache utilization if you try to segregate their
 * data and preserve locality.
 *
 * For example, dirty sectors of flash only volume is not reclaimable, if their
 * dirty sectors mixed with dirty sectors of cached device, such buckets will
 * be marked as dirty and won't be reclaimed, though the dirty data of cached
 * device have been written back to backend device.
 *
 * And say you've starting Firefox at the same time you're copying a
 * bunch of files. Firefox will likely end up being fairly hot and stay in the
 * cache awhile, but the data you copied might not be; if you wrote all that
 * data to the same buckets it'd get invalidated at the same time.
 *
 * Both of those tasks will be doing fairly random IO so we can't rely on
 * detecting sequential IO to segregate their data, but going off of the task
 * should be a sane heuristic.
 */
static struct open_bucket *pick_data_bucket(struct cache_set *c,
                                            const struct bkey *search,
                                            unsigned write_point,
                                            struct bkey *alloc)
{
        struct open_bucket *ret, *ret_task = NULL;

        list_for_each_entry_reverse(ret, &c->data_buckets, list)
                if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) !=
                    UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)]))
                        continue;
                else if (!bkey_cmp(&ret->key, search))
                        goto found;
                else if (ret->last_write_point == write_point)
                        ret_task = ret;

        ret = ret_task ?: list_first_entry(&c->data_buckets,
                                           struct open_bucket, list);
found:
        if (!ret->sectors_free && KEY_PTRS(alloc)) {
                ret->sectors_free = c->sb.bucket_size;
                bkey_copy(&ret->key, alloc);
                bkey_init(alloc);
        }

        if (!ret->sectors_free)
                ret = NULL;

        return ret;
}

/*
 * Allocates some space in the cache to write to, and k to point to the newly
 * allocated space, and updates KEY_SIZE(k) and KEY_OFFSET(k) (to point to the
 * end of the newly allocated space).
 *
 * May allocate fewer sectors than @sectors, KEY_SIZE(k) indicates how many
 * sectors were actually allocated.
 *
 * If s->writeback is true, will not fail.
 */
bool bch_alloc_sectors(struct cache_set *c, struct bkey *k, unsigned sectors,
                       unsigned write_point, unsigned write_prio, bool wait)
{
        struct open_bucket *b;
        BKEY_PADDED(key) alloc;
        unsigned i;

        /*
         * We might have to allocate a new bucket, which we can't do with a
         * spinlock held. So if we have to allocate, we drop the lock, allocate
         * and then retry. KEY_PTRS() indicates whether alloc points to
         * allocated bucket(s).
         */

        bkey_init(&alloc.key);
        spin_lock(&c->data_bucket_lock);

        while (!(b = pick_data_bucket(c, k, write_point, &alloc.key))) {
                unsigned watermark = write_prio
                        ? RESERVE_MOVINGGC
                        : RESERVE_NONE;

                spin_unlock(&c->data_bucket_lock);

                if (bch_bucket_alloc_set(c, watermark, &alloc.key, 1, wait))
                        return false;

                spin_lock(&c->data_bucket_lock);
        }

        /*
         * If we had to allocate, we might race and not need to allocate the
         * second time we call find_data_bucket(). If we allocated a bucket but
         * didn't use it, drop the refcount bch_bucket_alloc_set() took:
         */
        if (KEY_PTRS(&alloc.key))
                bkey_put(c, &alloc.key);

        for (i = 0; i < KEY_PTRS(&b->key); i++)
                EBUG_ON(ptr_stale(c, &b->key, i));

        /* Set up the pointer to the space we're allocating: */

        for (i = 0; i < KEY_PTRS(&b->key); i++)
                k->ptr[i] = b->key.ptr[i];

        sectors = min(sectors, b->sectors_free);

        SET_KEY_OFFSET(k, KEY_OFFSET(k) + sectors);
        SET_KEY_SIZE(k, sectors);
        SET_KEY_PTRS(k, KEY_PTRS(&b->key));

        /*
         * Move b to the end of the lru, and keep track of what this bucket was
         * last used for:
         */
        list_move_tail(&b->list, &c->data_buckets);
        bkey_copy_key(&b->key, k);
        b->last_write_point = write_point;

        b->sectors_free -= sectors;

        for (i = 0; i < KEY_PTRS(&b->key); i++) {
                SET_PTR_OFFSET(&b->key, i, PTR_OFFSET(&b->key, i) + sectors);

                atomic_long_add(sectors,
                                &PTR_CACHE(c, &b->key, i)->sectors_written);
        }

        if (b->sectors_free < c->sb.block_size)
                b->sectors_free = 0;

        /*
         * k takes refcounts on the buckets it points to until it's inserted
         * into the btree, but if we're done with this bucket we just transfer
         * get_data_bucket()'s refcount.
         */
        if (b->sectors_free)
                for (i = 0; i < KEY_PTRS(&b->key); i++)
                        atomic_inc(&PTR_BUCKET(c, &b->key, i)->pin);

        spin_unlock(&c->data_bucket_lock);
        return true;
}

/* Init */

void bch_open_buckets_free(struct cache_set *c)
{
        struct open_bucket *b;

        while (!list_empty(&c->data_buckets)) {
                b = list_first_entry(&c->data_buckets,
                                     struct open_bucket, list);
                list_del(&b->list);
                kfree(b);
        }
}

int bch_open_buckets_alloc(struct cache_set *c)
{
        int i;

        spin_lock_init(&c->data_bucket_lock);

        for (i = 0; i < 6; i++) {
                struct open_bucket *b = kzalloc(sizeof(*b), GFP_KERNEL);
                if (!b)
                        return -ENOMEM;

                list_add(&b->list, &c->data_buckets);
        }

        return 0;
}

int bch_cache_allocator_start(struct cache *ca)
{
        struct task_struct *k = kthread_run(bch_allocator_thread,
                                            ca, "bcache_allocator");
        if (IS_ERR(k))
                return PTR_ERR(k);

        ca->alloc_thread = k;
        return 0;
}