dm thin metadata: fix __udivdi3 undefined on 32-bit
[linux/fpc-iii.git] / drivers / media / i2c / s5k4ecgx.c
blob97084237275dcafcc2b3edcd01ccaa4b6831cec6
1 /*
2 * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC
3 * with an Embedded Image Signal Processor.
5 * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@linaro.org>
6 * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee <suapapa@insignal.co.kr>
8 * Based on s5k6aa and noon010pc30 driver
9 * Copyright (C) 2011, Samsung Electronics Co., Ltd.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
17 #include <linux/clk.h>
18 #include <linux/crc32.h>
19 #include <linux/ctype.h>
20 #include <linux/delay.h>
21 #include <linux/firmware.h>
22 #include <linux/gpio.h>
23 #include <linux/i2c.h>
24 #include <linux/module.h>
25 #include <linux/regulator/consumer.h>
26 #include <linux/slab.h>
27 #include <asm/unaligned.h>
29 #include <media/media-entity.h>
30 #include <media/s5k4ecgx.h>
31 #include <media/v4l2-ctrls.h>
32 #include <media/v4l2-device.h>
33 #include <media/v4l2-mediabus.h>
34 #include <media/v4l2-subdev.h>
36 static int debug;
37 module_param(debug, int, 0644);
39 #define S5K4ECGX_DRIVER_NAME "s5k4ecgx"
40 #define S5K4ECGX_FIRMWARE "s5k4ecgx.bin"
42 /* Firmware revision information */
43 #define REG_FW_REVISION 0x700001a6
44 #define REG_FW_VERSION 0x700001a4
45 #define S5K4ECGX_REVISION_1_1 0x11
46 #define S5K4ECGX_FW_VERSION 0x4ec0
48 /* General purpose parameters */
49 #define REG_USER_BRIGHTNESS 0x7000022c
50 #define REG_USER_CONTRAST 0x7000022e
51 #define REG_USER_SATURATION 0x70000230
53 #define REG_G_ENABLE_PREV 0x7000023e
54 #define REG_G_ENABLE_PREV_CHG 0x70000240
55 #define REG_G_NEW_CFG_SYNC 0x7000024a
56 #define REG_G_PREV_IN_WIDTH 0x70000250
57 #define REG_G_PREV_IN_HEIGHT 0x70000252
58 #define REG_G_PREV_IN_XOFFS 0x70000254
59 #define REG_G_PREV_IN_YOFFS 0x70000256
60 #define REG_G_CAP_IN_WIDTH 0x70000258
61 #define REG_G_CAP_IN_HEIGHT 0x7000025a
62 #define REG_G_CAP_IN_XOFFS 0x7000025c
63 #define REG_G_CAP_IN_YOFFS 0x7000025e
64 #define REG_G_INPUTS_CHANGE_REQ 0x70000262
65 #define REG_G_ACTIVE_PREV_CFG 0x70000266
66 #define REG_G_PREV_CFG_CHG 0x70000268
67 #define REG_G_PREV_OPEN_AFTER_CH 0x7000026a
69 /* Preview context register sets. n = 0...4. */
70 #define PREG(n, x) ((n) * 0x30 + (x))
71 #define REG_P_OUT_WIDTH(n) PREG(n, 0x700002a6)
72 #define REG_P_OUT_HEIGHT(n) PREG(n, 0x700002a8)
73 #define REG_P_FMT(n) PREG(n, 0x700002aa)
74 #define REG_P_PVI_MASK(n) PREG(n, 0x700002b4)
75 #define REG_P_FR_TIME_TYPE(n) PREG(n, 0x700002be)
76 #define FR_TIME_DYNAMIC 0
77 #define FR_TIME_FIXED 1
78 #define FR_TIME_FIXED_ACCURATE 2
79 #define REG_P_FR_TIME_Q_TYPE(n) PREG(n, 0x700002c0)
80 #define FR_TIME_Q_DYNAMIC 0
81 #define FR_TIME_Q_BEST_FRRATE 1
82 #define FR_TIME_Q_BEST_QUALITY 2
84 /* Frame period in 0.1 ms units */
85 #define REG_P_MAX_FR_TIME(n) PREG(n, 0x700002c2)
86 #define REG_P_MIN_FR_TIME(n) PREG(n, 0x700002c4)
87 #define US_TO_FR_TIME(__t) ((__t) / 100)
88 #define REG_P_PREV_MIRROR(n) PREG(n, 0x700002d0)
89 #define REG_P_CAP_MIRROR(n) PREG(n, 0x700002d2)
91 #define REG_G_PREVZOOM_IN_WIDTH 0x70000494
92 #define REG_G_PREVZOOM_IN_HEIGHT 0x70000496
93 #define REG_G_PREVZOOM_IN_XOFFS 0x70000498
94 #define REG_G_PREVZOOM_IN_YOFFS 0x7000049a
95 #define REG_G_CAPZOOM_IN_WIDTH 0x7000049c
96 #define REG_G_CAPZOOM_IN_HEIGHT 0x7000049e
97 #define REG_G_CAPZOOM_IN_XOFFS 0x700004a0
98 #define REG_G_CAPZOOM_IN_YOFFS 0x700004a2
100 /* n = 0...4 */
101 #define REG_USER_SHARPNESS(n) (0x70000a28 + (n) * 0xb6)
103 /* Reduce sharpness range for user space API */
104 #define SHARPNESS_DIV 8208
105 #define TOK_TERM 0xffffffff
108 * FIXME: This is copied from s5k6aa, because of no information
109 * in the S5K4ECGX datasheet.
110 * H/W register Interface (0xd0000000 - 0xd0000fff)
112 #define AHB_MSB_ADDR_PTR 0xfcfc
113 #define GEN_REG_OFFSH 0xd000
114 #define REG_CMDWR_ADDRH 0x0028
115 #define REG_CMDWR_ADDRL 0x002a
116 #define REG_CMDRD_ADDRH 0x002c
117 #define REG_CMDRD_ADDRL 0x002e
118 #define REG_CMDBUF0_ADDR 0x0f12
120 struct s5k4ecgx_frmsize {
121 struct v4l2_frmsize_discrete size;
122 /* Fixed sensor matrix crop rectangle */
123 struct v4l2_rect input_window;
126 struct regval_list {
127 u32 addr;
128 u16 val;
132 * TODO: currently only preview is supported and snapshot (capture)
133 * is not implemented yet
135 static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = {
137 .size = { 176, 144 },
138 .input_window = { 0x00, 0x00, 0x928, 0x780 },
139 }, {
140 .size = { 352, 288 },
141 .input_window = { 0x00, 0x00, 0x928, 0x780 },
142 }, {
143 .size = { 640, 480 },
144 .input_window = { 0x00, 0x00, 0xa00, 0x780 },
145 }, {
146 .size = { 720, 480 },
147 .input_window = { 0x00, 0x00, 0xa00, 0x6a8 },
151 #define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes)
153 struct s5k4ecgx_pixfmt {
154 u32 code;
155 u32 colorspace;
156 /* REG_TC_PCFG_Format register value */
157 u16 reg_p_format;
160 /* By default value, output from sensor will be YUV422 0-255 */
161 static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = {
162 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
165 static const char * const s5k4ecgx_supply_names[] = {
167 * Usually 2.8V is used for analog power (vdda)
168 * and digital IO (vddio, vdddcore)
170 "vdda",
171 "vddio",
172 "vddcore",
173 "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */
176 #define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names)
178 enum s5k4ecgx_gpio_id {
179 STBY,
180 RST,
181 GPIO_NUM,
184 struct s5k4ecgx {
185 struct v4l2_subdev sd;
186 struct media_pad pad;
187 struct v4l2_ctrl_handler handler;
189 struct s5k4ecgx_platform_data *pdata;
190 const struct s5k4ecgx_pixfmt *curr_pixfmt;
191 const struct s5k4ecgx_frmsize *curr_frmsize;
192 struct mutex lock;
193 u8 streaming;
194 u8 set_params;
196 struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES];
197 struct s5k4ecgx_gpio gpio[GPIO_NUM];
200 static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
202 return container_of(sd, struct s5k4ecgx, sd);
205 static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
207 u8 wbuf[2] = { addr >> 8, addr & 0xff };
208 struct i2c_msg msg[2];
209 u8 rbuf[2];
210 int ret;
212 msg[0].addr = client->addr;
213 msg[0].flags = 0;
214 msg[0].len = 2;
215 msg[0].buf = wbuf;
217 msg[1].addr = client->addr;
218 msg[1].flags = I2C_M_RD;
219 msg[1].len = 2;
220 msg[1].buf = rbuf;
222 ret = i2c_transfer(client->adapter, msg, 2);
223 *val = be16_to_cpu(*((__be16 *)rbuf));
225 v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
227 return ret == 2 ? 0 : ret;
230 static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val)
232 u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff };
234 int ret = i2c_master_send(client, buf, 4);
235 v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val);
237 return ret == 4 ? 0 : ret;
240 static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val)
242 u16 high = addr >> 16, low = addr & 0xffff;
243 int ret;
245 v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val);
247 ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high);
248 if (!ret)
249 ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low);
250 if (!ret)
251 ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
253 return ret;
256 static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val)
258 u16 high = addr >> 16, low = addr & 0xffff;
259 int ret;
261 ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high);
262 if (!ret)
263 ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low);
264 if (!ret)
265 ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val);
266 if (!ret)
267 dev_err(&client->dev, "Failed to execute read command\n");
269 return ret;
272 static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd)
274 struct i2c_client *client = v4l2_get_subdevdata(sd);
275 u16 hw_rev, fw_ver = 0;
276 int ret;
278 ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver);
279 if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) {
280 v4l2_err(sd, "FW version check failed!\n");
281 return -ENODEV;
284 ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev);
285 if (ret < 0)
286 return ret;
288 v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n",
289 fw_ver, hw_rev);
290 return 0;
293 static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd)
295 struct i2c_client *client = v4l2_get_subdevdata(sd);
296 int ret;
298 /* Set APB peripherals start address */
299 ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
300 if (ret < 0)
301 return ret;
303 * FIXME: This is copied from s5k6aa, because of no information
304 * in s5k4ecgx's datasheet.
305 * sw_reset is activated to put device into idle status
307 ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001);
308 if (ret < 0)
309 return ret;
311 ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000);
312 if (ret < 0)
313 return ret;
314 /* Halt ARM CPU */
315 return s5k4ecgx_i2c_write(client, 0x0014, 0x0001);
318 #define FW_CRC_SIZE 4
319 /* Register address, value are 4, 2 bytes */
320 #define FW_RECORD_SIZE 6
322 * The firmware has following format:
323 * < total number of records (4 bytes + 2 bytes padding) N >,
324 * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >,
325 * where "record" is a 4-byte register address followed by 2-byte
326 * register value (little endian).
327 * The firmware generator can be found in following git repository:
328 * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git
330 static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
332 struct i2c_client *client = v4l2_get_subdevdata(sd);
333 const struct firmware *fw;
334 const u8 *ptr;
335 int err, i, regs_num;
336 u32 addr, crc, crc_file, addr_inc = 0;
337 u16 val;
339 err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
340 if (err) {
341 v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
342 return err;
344 regs_num = get_unaligned_le32(fw->data);
346 v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n",
347 S5K4ECGX_FIRMWARE, fw->size, regs_num);
349 regs_num++; /* Add header */
350 if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) {
351 err = -EINVAL;
352 goto fw_out;
354 crc_file = get_unaligned_le32(fw->data + regs_num * FW_RECORD_SIZE);
355 crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE);
356 if (crc != crc_file) {
357 v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file);
358 err = -EINVAL;
359 goto fw_out;
361 ptr = fw->data + FW_RECORD_SIZE;
362 for (i = 1; i < regs_num; i++) {
363 addr = get_unaligned_le32(ptr);
364 ptr += sizeof(u32);
365 val = get_unaligned_le16(ptr);
366 ptr += sizeof(u16);
367 if (addr - addr_inc != 2)
368 err = s5k4ecgx_write(client, addr, val);
369 else
370 err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
371 if (err)
372 break;
373 addr_inc = addr;
375 fw_out:
376 release_firmware(fw);
377 return err;
380 /* Set preview and capture input window */
381 static int s5k4ecgx_set_input_window(struct i2c_client *c,
382 const struct v4l2_rect *r)
384 int ret;
386 ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width);
387 if (!ret)
388 ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height);
389 if (!ret)
390 ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left);
391 if (!ret)
392 ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top);
393 if (!ret)
394 ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width);
395 if (!ret)
396 ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height);
397 if (!ret)
398 ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left);
399 if (!ret)
400 ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top);
402 return ret;
405 /* Set preview and capture zoom input window */
406 static int s5k4ecgx_set_zoom_window(struct i2c_client *c,
407 const struct v4l2_rect *r)
409 int ret;
411 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
412 if (!ret)
413 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
414 if (!ret)
415 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
416 if (!ret)
417 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
418 if (!ret)
419 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width);
420 if (!ret)
421 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height);
422 if (!ret)
423 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left);
424 if (!ret)
425 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top);
427 return ret;
430 static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv)
432 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
433 int ret;
435 ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0),
436 priv->curr_frmsize->size.width);
437 if (!ret)
438 ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0),
439 priv->curr_frmsize->size.height);
440 if (!ret)
441 ret = s5k4ecgx_write(client, REG_P_FMT(0),
442 priv->curr_pixfmt->reg_p_format);
443 return ret;
446 static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd)
448 int ret;
450 ret = s5k4ecgx_set_ahb_address(sd);
452 /* The delay is from manufacturer's settings */
453 msleep(100);
455 if (!ret)
456 ret = s5k4ecgx_load_firmware(sd);
457 if (ret)
458 v4l2_err(sd, "Failed to write initial settings\n");
460 return ret;
463 static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val)
465 if (!gpio_is_valid(priv->gpio[id].gpio))
466 return 0;
467 gpio_set_value(priv->gpio[id].gpio, val);
469 return 1;
472 static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
474 int ret;
476 ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
477 if (ret)
478 return ret;
479 usleep_range(30, 50);
481 /* The polarity of STBY is controlled by TSP */
482 if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
483 usleep_range(30, 50);
485 if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level))
486 usleep_range(30, 50);
488 return 0;
491 static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
493 if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level))
494 usleep_range(30, 50);
496 if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
497 usleep_range(30, 50);
499 priv->streaming = 0;
501 return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
504 /* Find nearest matching image pixel size. */
505 static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf,
506 const struct s5k4ecgx_frmsize **size)
508 unsigned int min_err = ~0;
509 int i = ARRAY_SIZE(s5k4ecgx_prev_sizes);
510 const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0],
511 *match = NULL;
513 while (i--) {
514 int err = abs(fsize->size.width - mf->width)
515 + abs(fsize->size.height - mf->height);
516 if (err < min_err) {
517 min_err = err;
518 match = fsize;
520 fsize++;
522 if (match) {
523 mf->width = match->size.width;
524 mf->height = match->size.height;
525 if (size)
526 *size = match;
527 return 0;
530 return -EINVAL;
533 static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd,
534 struct v4l2_subdev_pad_config *cfg,
535 struct v4l2_subdev_mbus_code_enum *code)
537 if (code->index >= ARRAY_SIZE(s5k4ecgx_formats))
538 return -EINVAL;
539 code->code = s5k4ecgx_formats[code->index].code;
541 return 0;
544 static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
545 struct v4l2_subdev_format *fmt)
547 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
548 struct v4l2_mbus_framefmt *mf;
550 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
551 if (cfg) {
552 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
553 fmt->format = *mf;
555 return 0;
558 mf = &fmt->format;
560 mutex_lock(&priv->lock);
561 mf->width = priv->curr_frmsize->size.width;
562 mf->height = priv->curr_frmsize->size.height;
563 mf->code = priv->curr_pixfmt->code;
564 mf->colorspace = priv->curr_pixfmt->colorspace;
565 mf->field = V4L2_FIELD_NONE;
566 mutex_unlock(&priv->lock);
568 return 0;
571 static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd,
572 struct v4l2_mbus_framefmt *mf)
574 int i = ARRAY_SIZE(s5k4ecgx_formats);
576 while (--i)
577 if (mf->code == s5k4ecgx_formats[i].code)
578 break;
579 mf->code = s5k4ecgx_formats[i].code;
581 return &s5k4ecgx_formats[i];
584 static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
585 struct v4l2_subdev_format *fmt)
587 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
588 const struct s5k4ecgx_frmsize *fsize = NULL;
589 const struct s5k4ecgx_pixfmt *pf;
590 struct v4l2_mbus_framefmt *mf;
591 int ret = 0;
593 pf = s5k4ecgx_try_fmt(sd, &fmt->format);
594 s5k4ecgx_try_frame_size(&fmt->format, &fsize);
595 fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
596 fmt->format.field = V4L2_FIELD_NONE;
598 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
599 if (cfg) {
600 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
601 *mf = fmt->format;
603 return 0;
606 mutex_lock(&priv->lock);
607 if (!priv->streaming) {
608 priv->curr_frmsize = fsize;
609 priv->curr_pixfmt = pf;
610 priv->set_params = 1;
611 } else {
612 ret = -EBUSY;
614 mutex_unlock(&priv->lock);
616 return ret;
619 static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = {
620 .enum_mbus_code = s5k4ecgx_enum_mbus_code,
621 .get_fmt = s5k4ecgx_get_fmt,
622 .set_fmt = s5k4ecgx_set_fmt,
626 * V4L2 subdev controls
628 static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl)
630 struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx,
631 handler)->sd;
632 struct i2c_client *client = v4l2_get_subdevdata(sd);
633 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
634 unsigned int i;
635 int err = 0;
637 v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
639 mutex_lock(&priv->lock);
640 switch (ctrl->id) {
641 case V4L2_CID_CONTRAST:
642 err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val);
643 break;
645 case V4L2_CID_SATURATION:
646 err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val);
647 break;
649 case V4L2_CID_SHARPNESS:
650 /* TODO: Revisit, is this setting for all presets ? */
651 for (i = 0; i < 4 && !err; i++)
652 err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i),
653 ctrl->val * SHARPNESS_DIV);
654 break;
656 case V4L2_CID_BRIGHTNESS:
657 err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val);
658 break;
660 mutex_unlock(&priv->lock);
661 if (err < 0)
662 v4l2_err(sd, "Failed to write s_ctrl err %d\n", err);
664 return err;
667 static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = {
668 .s_ctrl = s5k4ecgx_s_ctrl,
672 * Reading s5k4ecgx version information
674 static int s5k4ecgx_registered(struct v4l2_subdev *sd)
676 int ret;
677 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
679 mutex_lock(&priv->lock);
680 ret = __s5k4ecgx_power_on(priv);
681 if (!ret) {
682 ret = s5k4ecgx_read_fw_ver(sd);
683 __s5k4ecgx_power_off(priv);
685 mutex_unlock(&priv->lock);
687 return ret;
691 * V4L2 subdev internal operations
693 static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
695 struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0);
697 mf->width = s5k4ecgx_prev_sizes[0].size.width;
698 mf->height = s5k4ecgx_prev_sizes[0].size.height;
699 mf->code = s5k4ecgx_formats[0].code;
700 mf->colorspace = V4L2_COLORSPACE_JPEG;
701 mf->field = V4L2_FIELD_NONE;
703 return 0;
706 static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = {
707 .registered = s5k4ecgx_registered,
708 .open = s5k4ecgx_open,
711 static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on)
713 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
714 int ret;
716 v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off");
718 if (on) {
719 ret = __s5k4ecgx_power_on(priv);
720 if (ret < 0)
721 return ret;
722 /* Time to stabilize sensor */
723 msleep(100);
724 ret = s5k4ecgx_init_sensor(sd);
725 if (ret < 0)
726 __s5k4ecgx_power_off(priv);
727 else
728 priv->set_params = 1;
729 } else {
730 ret = __s5k4ecgx_power_off(priv);
733 return ret;
736 static int s5k4ecgx_log_status(struct v4l2_subdev *sd)
738 v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
740 return 0;
743 static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = {
744 .s_power = s5k4ecgx_s_power,
745 .log_status = s5k4ecgx_log_status,
748 static int __s5k4ecgx_s_params(struct s5k4ecgx *priv)
750 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
751 const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window;
752 int ret;
754 ret = s5k4ecgx_set_input_window(client, crop_rect);
755 if (!ret)
756 ret = s5k4ecgx_set_zoom_window(client, crop_rect);
757 if (!ret)
758 ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1);
759 if (!ret)
760 ret = s5k4ecgx_write(client, 0x70000a1e, 0x28);
761 if (!ret)
762 ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c);
763 if (!ret)
764 ret = s5k4ecgx_set_output_framefmt(priv);
765 if (!ret)
766 ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52);
767 if (!ret)
768 ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0),
769 FR_TIME_DYNAMIC);
770 if (!ret)
771 ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0),
772 FR_TIME_Q_BEST_FRRATE);
773 if (!ret)
774 ret = s5k4ecgx_write(client, REG_P_MIN_FR_TIME(0),
775 US_TO_FR_TIME(33300));
776 if (!ret)
777 ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0),
778 US_TO_FR_TIME(66600));
779 if (!ret)
780 ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0);
781 if (!ret)
782 ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0);
783 if (!ret)
784 ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0);
785 if (!ret)
786 ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1);
787 if (!ret)
788 ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1);
789 if (!ret)
790 ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1);
792 return ret;
795 static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on)
797 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
798 int ret;
800 if (on && priv->set_params) {
801 ret = __s5k4ecgx_s_params(priv);
802 if (ret < 0)
803 return ret;
804 priv->set_params = 0;
807 * This enables/disables preview stream only. Capture requests
808 * are not supported yet.
810 ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on);
811 if (ret < 0)
812 return ret;
813 return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1);
816 static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
818 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
819 int ret = 0;
821 v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off");
823 mutex_lock(&priv->lock);
825 if (priv->streaming == !on) {
826 ret = __s5k4ecgx_s_stream(priv, on);
827 if (!ret)
828 priv->streaming = on & 1;
831 mutex_unlock(&priv->lock);
832 return ret;
835 static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = {
836 .s_stream = s5k4ecgx_s_stream,
839 static const struct v4l2_subdev_ops s5k4ecgx_ops = {
840 .core = &s5k4ecgx_core_ops,
841 .pad = &s5k4ecgx_pad_ops,
842 .video = &s5k4ecgx_video_ops,
846 * GPIO setup
848 static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
850 unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
851 int ret;
853 if (!gpio_is_valid(nr))
854 return 0;
855 ret = gpio_request_one(nr, flags, name);
856 if (!ret)
857 gpio_export(nr, 0);
859 return ret;
862 static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv)
864 int i;
866 for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) {
867 if (!gpio_is_valid(priv->gpio[i].gpio))
868 continue;
869 gpio_free(priv->gpio[i].gpio);
870 priv->gpio[i].gpio = -EINVAL;
874 static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
875 const struct s5k4ecgx_platform_data *pdata)
877 const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby;
878 int ret;
880 priv->gpio[STBY].gpio = -EINVAL;
881 priv->gpio[RST].gpio = -EINVAL;
883 ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
885 if (ret) {
886 s5k4ecgx_free_gpios(priv);
887 return ret;
889 priv->gpio[STBY] = *gpio;
890 if (gpio_is_valid(gpio->gpio))
891 gpio_set_value(gpio->gpio, 0);
893 gpio = &pdata->gpio_reset;
895 ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST");
896 if (ret) {
897 s5k4ecgx_free_gpios(priv);
898 return ret;
900 priv->gpio[RST] = *gpio;
901 if (gpio_is_valid(gpio->gpio))
902 gpio_set_value(gpio->gpio, 0);
904 return 0;
907 static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv)
909 const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
910 struct v4l2_ctrl_handler *hdl = &priv->handler;
911 int ret;
913 ret = v4l2_ctrl_handler_init(hdl, 4);
914 if (ret)
915 return ret;
917 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0);
918 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
919 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
921 /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */
922 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV,
923 24612/SHARPNESS_DIV, 1, 2);
924 if (hdl->error) {
925 ret = hdl->error;
926 v4l2_ctrl_handler_free(hdl);
927 return ret;
929 priv->sd.ctrl_handler = hdl;
931 return 0;
934 static int s5k4ecgx_probe(struct i2c_client *client,
935 const struct i2c_device_id *id)
937 struct s5k4ecgx_platform_data *pdata = client->dev.platform_data;
938 struct v4l2_subdev *sd;
939 struct s5k4ecgx *priv;
940 int ret, i;
942 if (pdata == NULL) {
943 dev_err(&client->dev, "platform data is missing!\n");
944 return -EINVAL;
947 priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL);
948 if (!priv)
949 return -ENOMEM;
951 mutex_init(&priv->lock);
952 priv->streaming = 0;
954 sd = &priv->sd;
955 /* Registering subdev */
956 v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops);
957 strlcpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name));
959 sd->internal_ops = &s5k4ecgx_subdev_internal_ops;
960 /* Support v4l2 sub-device user space API */
961 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
963 priv->pad.flags = MEDIA_PAD_FL_SOURCE;
964 sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
965 ret = media_entity_init(&sd->entity, 1, &priv->pad, 0);
966 if (ret)
967 return ret;
969 ret = s5k4ecgx_config_gpios(priv, pdata);
970 if (ret) {
971 dev_err(&client->dev, "Failed to set gpios\n");
972 goto out_err1;
974 for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++)
975 priv->supplies[i].supply = s5k4ecgx_supply_names[i];
977 ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES,
978 priv->supplies);
979 if (ret) {
980 dev_err(&client->dev, "Failed to get regulators\n");
981 goto out_err2;
983 ret = s5k4ecgx_init_v4l2_ctrls(priv);
984 if (ret)
985 goto out_err2;
987 priv->curr_pixfmt = &s5k4ecgx_formats[0];
988 priv->curr_frmsize = &s5k4ecgx_prev_sizes[0];
990 return 0;
992 out_err2:
993 s5k4ecgx_free_gpios(priv);
994 out_err1:
995 media_entity_cleanup(&priv->sd.entity);
997 return ret;
1000 static int s5k4ecgx_remove(struct i2c_client *client)
1002 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1003 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
1005 mutex_destroy(&priv->lock);
1006 s5k4ecgx_free_gpios(priv);
1007 v4l2_device_unregister_subdev(sd);
1008 v4l2_ctrl_handler_free(&priv->handler);
1009 media_entity_cleanup(&sd->entity);
1011 return 0;
1014 static const struct i2c_device_id s5k4ecgx_id[] = {
1015 { S5K4ECGX_DRIVER_NAME, 0 },
1018 MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id);
1020 static struct i2c_driver v4l2_i2c_driver = {
1021 .driver = {
1022 .owner = THIS_MODULE,
1023 .name = S5K4ECGX_DRIVER_NAME,
1025 .probe = s5k4ecgx_probe,
1026 .remove = s5k4ecgx_remove,
1027 .id_table = s5k4ecgx_id,
1030 module_i2c_driver(v4l2_i2c_driver);
1032 MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera");
1033 MODULE_AUTHOR("Sangwook Lee <sangwook.lee@linaro.org>");
1034 MODULE_AUTHOR("Seok-Young Jang <quartz.jang@samsung.com>");
1035 MODULE_LICENSE("GPL");
1036 MODULE_FIRMWARE(S5K4ECGX_FIRMWARE);