drivers/scsi/hpsa.h

   1 /*
   2  *    Disk Array driver for HP Smart Array SAS controllers
   3  *    Copyright 2014-2015 PMC-Sierra, Inc.
   4  *    Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
   5  *
   6  *    This program is free software; you can redistribute it and/or modify
   7  *    it under the terms of the GNU General Public License as published by
   8  *    the Free Software Foundation; version 2 of the License.
   9  *
  10  *    This program is distributed in the hope that it will be useful,
  11  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  13  *    NON INFRINGEMENT.  See the GNU General Public License for more details.
  14  *
  15  *    Questions/Comments/Bugfixes to storagedev@pmcs.com
  16  *
  17  */
  18 #ifndef HPSA_H
  19 #define HPSA_H
  20
  21 #include <scsi/scsicam.h>
  22
  23 #define IO_OK           0
  24 #define IO_ERROR        1
  25
  26 struct ctlr_info;
  27
  28 struct access_method {
  29         void (*submit_command)(struct ctlr_info *h,
  30                 struct CommandList *c);
  31         void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
  32         bool (*intr_pending)(struct ctlr_info *h);
  33         unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
  34 };
  35
  36 /* for SAS hosts and SAS expanders */
  37 struct hpsa_sas_node {
  38         struct device *parent_dev;
  39         struct list_head port_list_head;
  40 };
  41
  42 struct hpsa_sas_port {
  43         struct list_head port_list_entry;
  44         u64 sas_address;
  45         struct sas_port *port;
  46         int next_phy_index;
  47         struct list_head phy_list_head;
  48         struct hpsa_sas_node *parent_node;
  49         struct sas_rphy *rphy;
  50 };
  51
  52 struct hpsa_sas_phy {
  53         struct list_head phy_list_entry;
  54         struct sas_phy *phy;
  55         struct hpsa_sas_port *parent_port;
  56         bool added_to_port;
  57 };
  58
  59 struct hpsa_scsi_dev_t {
  60         unsigned int devtype;
  61         int bus, target, lun;           /* as presented to the OS */
  62         unsigned char scsi3addr[8];     /* as presented to the HW */
  63         u8 physical_device : 1;
  64         u8 expose_device;
  65 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
  66         unsigned char device_id[16];    /* from inquiry pg. 0x83 */
  67         u64 sas_address;
  68         unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
  69         unsigned char model[16];        /* bytes 16-31 of inquiry data */
  70         unsigned char raid_level;       /* from inquiry page 0xC1 */
  71         unsigned char volume_offline;   /* discovered via TUR or VPD */
  72         u16 queue_depth;                /* max queue_depth for this device */
  73         atomic_t reset_cmds_out;        /* Count of commands to-be affected */
  74         atomic_t ioaccel_cmds_out;      /* Only used for physical devices
  75                                          * counts commands sent to physical
  76                                          * device via "ioaccel" path.
  77                                          */
  78         u32 ioaccel_handle;
  79         u8 active_path_index;
  80         u8 path_map;
  81         u8 bay;
  82         u8 box[8];
  83         u16 phys_connector[8];
  84         int offload_config;             /* I/O accel RAID offload configured */
  85         int offload_enabled;            /* I/O accel RAID offload enabled */
  86         int offload_to_be_enabled;
  87         int hba_ioaccel_enabled;
  88         int offload_to_mirror;          /* Send next I/O accelerator RAID
  89                                          * offload request to mirror drive
  90                                          */
  91         struct raid_map_data raid_map;  /* I/O accelerator RAID map */
  92
  93         /*
  94          * Pointers from logical drive map indices to the phys drives that
  95          * make those logical drives.  Note, multiple logical drives may
  96          * share physical drives.  You can have for instance 5 physical
  97          * drives with 3 logical drives each using those same 5 physical
  98          * disks. We need these pointers for counting i/o's out to physical
  99          * devices in order to honor physical device queue depth limits.
 100          */
 101         struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
 102         int nphysical_disks;
 103         int supports_aborts;
 104         struct hpsa_sas_port *sas_port;
 105         int external;   /* 1-from external array 0-not <0-unknown */
 106 };
 107
 108 struct reply_queue_buffer {
 109         u64 *head;
 110         size_t size;
 111         u8 wraparound;
 112         u32 current_entry;
 113         dma_addr_t busaddr;
 114 };
 115
 116 #pragma pack(1)
 117 struct bmic_controller_parameters {
 118         u8   led_flags;
 119         u8   enable_command_list_verification;
 120         u8   backed_out_write_drives;
 121         u16  stripes_for_parity;
 122         u8   parity_distribution_mode_flags;
 123         u16  max_driver_requests;
 124         u16  elevator_trend_count;
 125         u8   disable_elevator;
 126         u8   force_scan_complete;
 127         u8   scsi_transfer_mode;
 128         u8   force_narrow;
 129         u8   rebuild_priority;
 130         u8   expand_priority;
 131         u8   host_sdb_asic_fix;
 132         u8   pdpi_burst_from_host_disabled;
 133         char software_name[64];
 134         char hardware_name[32];
 135         u8   bridge_revision;
 136         u8   snapshot_priority;
 137         u32  os_specific;
 138         u8   post_prompt_timeout;
 139         u8   automatic_drive_slamming;
 140         u8   reserved1;
 141         u8   nvram_flags;
 142         u8   cache_nvram_flags;
 143         u8   drive_config_flags;
 144         u16  reserved2;
 145         u8   temp_warning_level;
 146         u8   temp_shutdown_level;
 147         u8   temp_condition_reset;
 148         u8   max_coalesce_commands;
 149         u32  max_coalesce_delay;
 150         u8   orca_password[4];
 151         u8   access_id[16];
 152         u8   reserved[356];
 153 };
 154 #pragma pack()
 155
 156 struct ctlr_info {
 157         int     ctlr;
 158         char    devname[8];
 159         char    *product_name;
 160         struct pci_dev *pdev;
 161         u32     board_id;
 162         u64     sas_address;
 163         void __iomem *vaddr;
 164         unsigned long paddr;
 165         int     nr_cmds; /* Number of commands allowed on this controller */
 166 #define HPSA_CMDS_RESERVED_FOR_ABORTS 2
 167 #define HPSA_CMDS_RESERVED_FOR_DRIVER 1
 168         struct CfgTable __iomem *cfgtable;
 169         int     interrupts_enabled;
 170         int     max_commands;
 171         atomic_t commands_outstanding;
 172 #       define PERF_MODE_INT    0
 173 #       define DOORBELL_INT     1
 174 #       define SIMPLE_MODE_INT  2
 175 #       define MEMQ_MODE_INT    3
 176         unsigned int intr[MAX_REPLY_QUEUES];
 177         unsigned int msix_vector;
 178         unsigned int msi_vector;
 179         int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
 180         struct access_method access;
 181
 182         /* queue and queue Info */
 183         unsigned int Qdepth;
 184         unsigned int maxSG;
 185         spinlock_t lock;
 186         int maxsgentries;
 187         u8 max_cmd_sg_entries;
 188         int chainsize;
 189         struct SGDescriptor **cmd_sg_list;
 190         struct ioaccel2_sg_element **ioaccel2_cmd_sg_list;
 191
 192         /* pointers to command and error info pool */
 193         struct CommandList      *cmd_pool;
 194         dma_addr_t              cmd_pool_dhandle;
 195         struct io_accel1_cmd    *ioaccel_cmd_pool;
 196         dma_addr_t              ioaccel_cmd_pool_dhandle;
 197         struct io_accel2_cmd    *ioaccel2_cmd_pool;
 198         dma_addr_t              ioaccel2_cmd_pool_dhandle;
 199         struct ErrorInfo        *errinfo_pool;
 200         dma_addr_t              errinfo_pool_dhandle;
 201         unsigned long           *cmd_pool_bits;
 202         int                     scan_finished;
 203         u8                      scan_waiting : 1;
 204         spinlock_t              scan_lock;
 205         wait_queue_head_t       scan_wait_queue;
 206
 207         struct Scsi_Host *scsi_host;
 208         spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
 209         int ndevices; /* number of used elements in .dev[] array. */
 210         struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
 211         /*
 212          * Performant mode tables.
 213          */
 214         u32 trans_support;
 215         u32 trans_offset;
 216         struct TransTable_struct __iomem *transtable;
 217         unsigned long transMethod;
 218
 219         /* cap concurrent passthrus at some reasonable maximum */
 220 #define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
 221         atomic_t passthru_cmds_avail;
 222
 223         /*
 224          * Performant mode completion buffers
 225          */
 226         size_t reply_queue_size;
 227         struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
 228         u8 nreply_queues;
 229         u32 *blockFetchTable;
 230         u32 *ioaccel1_blockFetchTable;
 231         u32 *ioaccel2_blockFetchTable;
 232         u32 __iomem *ioaccel2_bft2_regs;
 233         unsigned char *hba_inquiry_data;
 234         u32 driver_support;
 235         u32 fw_support;
 236         int ioaccel_support;
 237         int ioaccel_maxsg;
 238         u64 last_intr_timestamp;
 239         u32 last_heartbeat;
 240         u64 last_heartbeat_timestamp;
 241         u32 heartbeat_sample_interval;
 242         atomic_t firmware_flash_in_progress;
 243         u32 __percpu *lockup_detected;
 244         struct delayed_work monitor_ctlr_work;
 245         struct delayed_work rescan_ctlr_work;
 246         int remove_in_progress;
 247         /* Address of h->q[x] is passed to intr handler to know which queue */
 248         u8 q[MAX_REPLY_QUEUES];
 249         char intrname[MAX_REPLY_QUEUES][16];    /* "hpsa0-msix00" names */
 250         u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
 251 #define HPSATMF_BITS_SUPPORTED  (1 << 0)
 252 #define HPSATMF_PHYS_LUN_RESET  (1 << 1)
 253 #define HPSATMF_PHYS_NEX_RESET  (1 << 2)
 254 #define HPSATMF_PHYS_TASK_ABORT (1 << 3)
 255 #define HPSATMF_PHYS_TSET_ABORT (1 << 4)
 256 #define HPSATMF_PHYS_CLEAR_ACA  (1 << 5)
 257 #define HPSATMF_PHYS_CLEAR_TSET (1 << 6)
 258 #define HPSATMF_PHYS_QRY_TASK   (1 << 7)
 259 #define HPSATMF_PHYS_QRY_TSET   (1 << 8)
 260 #define HPSATMF_PHYS_QRY_ASYNC  (1 << 9)
 261 #define HPSATMF_IOACCEL_ENABLED (1 << 15)
 262 #define HPSATMF_MASK_SUPPORTED  (1 << 16)
 263 #define HPSATMF_LOG_LUN_RESET   (1 << 17)
 264 #define HPSATMF_LOG_NEX_RESET   (1 << 18)
 265 #define HPSATMF_LOG_TASK_ABORT  (1 << 19)
 266 #define HPSATMF_LOG_TSET_ABORT  (1 << 20)
 267 #define HPSATMF_LOG_CLEAR_ACA   (1 << 21)
 268 #define HPSATMF_LOG_CLEAR_TSET  (1 << 22)
 269 #define HPSATMF_LOG_QRY_TASK    (1 << 23)
 270 #define HPSATMF_LOG_QRY_TSET    (1 << 24)
 271 #define HPSATMF_LOG_QRY_ASYNC   (1 << 25)
 272         u32 events;
 273 #define CTLR_STATE_CHANGE_EVENT                         (1 << 0)
 274 #define CTLR_ENCLOSURE_HOT_PLUG_EVENT                   (1 << 1)
 275 #define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV            (1 << 4)
 276 #define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV             (1 << 5)
 277 #define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL         (1 << 6)
 278 #define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED    (1 << 30)
 279 #define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE       (1 << 31)
 280
 281 #define RESCAN_REQUIRED_EVENT_BITS \
 282                 (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
 283                 CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
 284                 CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
 285                 CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
 286                 CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
 287         spinlock_t offline_device_lock;
 288         struct list_head offline_device_list;
 289         int     acciopath_status;
 290         int     drv_req_rescan;
 291         int     raid_offload_debug;
 292         int     discovery_polling;
 293         struct  ReportLUNdata *lastlogicals;
 294         int     needs_abort_tags_swizzled;
 295         struct workqueue_struct *resubmit_wq;
 296         struct workqueue_struct *rescan_ctlr_wq;
 297         atomic_t abort_cmds_available;
 298         wait_queue_head_t abort_cmd_wait_queue;
 299         wait_queue_head_t event_sync_wait_queue;
 300         struct mutex reset_mutex;
 301         u8 reset_in_progress;
 302         struct hpsa_sas_node *sas_host;
 303 };
 304
 305 struct offline_device_entry {
 306         unsigned char scsi3addr[8];
 307         struct list_head offline_list;
 308 };
 309
 310 #define HPSA_ABORT_MSG 0
 311 #define HPSA_DEVICE_RESET_MSG 1
 312 #define HPSA_RESET_TYPE_CONTROLLER 0x00
 313 #define HPSA_RESET_TYPE_BUS 0x01
 314 #define HPSA_RESET_TYPE_TARGET 0x03
 315 #define HPSA_RESET_TYPE_LUN 0x04
 316 #define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
 317 #define HPSA_MSG_SEND_RETRY_LIMIT 10
 318 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
 319
 320 /* Maximum time in seconds driver will wait for command completions
 321  * when polling before giving up.
 322  */
 323 #define HPSA_MAX_POLL_TIME_SECS (20)
 324
 325 /* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
 326  * how many times to retry TEST UNIT READY on a device
 327  * while waiting for it to become ready before giving up.
 328  * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
 329  * between sending TURs while waiting for a device
 330  * to become ready.
 331  */
 332 #define HPSA_TUR_RETRY_LIMIT (20)
 333 #define HPSA_MAX_WAIT_INTERVAL_SECS (30)
 334
 335 /* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
 336  * to become ready, in seconds, before giving up on it.
 337  * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
 338  * between polling the board to see if it is ready, in
 339  * milliseconds.  HPSA_BOARD_READY_POLL_INTERVAL and
 340  * HPSA_BOARD_READY_ITERATIONS are derived from those.
 341  */
 342 #define HPSA_BOARD_READY_WAIT_SECS (120)
 343 #define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
 344 #define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
 345 #define HPSA_BOARD_READY_POLL_INTERVAL \
 346         ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
 347 #define HPSA_BOARD_READY_ITERATIONS \
 348         ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
 349                 HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
 350 #define HPSA_BOARD_NOT_READY_ITERATIONS \
 351         ((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
 352                 HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
 353 #define HPSA_POST_RESET_PAUSE_MSECS (3000)
 354 #define HPSA_POST_RESET_NOOP_RETRIES (12)
 355
 356 /*  Defining the diffent access_menthods */
 357 /*
 358  * Memory mapped FIFO interface (SMART 53xx cards)
 359  */
 360 #define SA5_DOORBELL    0x20
 361 #define SA5_REQUEST_PORT_OFFSET 0x40
 362 #define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
 363 #define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
 364 #define SA5_REPLY_INTR_MASK_OFFSET      0x34
 365 #define SA5_REPLY_PORT_OFFSET           0x44
 366 #define SA5_INTR_STATUS         0x30
 367 #define SA5_SCRATCHPAD_OFFSET   0xB0
 368
 369 #define SA5_CTCFG_OFFSET        0xB4
 370 #define SA5_CTMEM_OFFSET        0xB8
 371
 372 #define SA5_INTR_OFF            0x08
 373 #define SA5B_INTR_OFF           0x04
 374 #define SA5_INTR_PENDING        0x08
 375 #define SA5B_INTR_PENDING       0x04
 376 #define FIFO_EMPTY              0xffffffff
 377 #define HPSA_FIRMWARE_READY     0xffff0000 /* value in scratchpad register */
 378
 379 #define HPSA_ERROR_BIT          0x02
 380
 381 /* Performant mode flags */
 382 #define SA5_PERF_INTR_PENDING   0x04
 383 #define SA5_PERF_INTR_OFF       0x05
 384 #define SA5_OUTDB_STATUS_PERF_BIT       0x01
 385 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 386 #define SA5_OUTDB_CLEAR         0xA0
 387 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 388 #define SA5_OUTDB_STATUS        0x9C
 389
 390
 391 #define HPSA_INTR_ON    1
 392 #define HPSA_INTR_OFF   0
 393
 394 /*
 395  * Inbound Post Queue offsets for IO Accelerator Mode 2
 396  */
 397 #define IOACCEL2_INBOUND_POSTQ_32       0x48
 398 #define IOACCEL2_INBOUND_POSTQ_64_LOW   0xd0
 399 #define IOACCEL2_INBOUND_POSTQ_64_HI    0xd4
 400
 401 #define HPSA_PHYSICAL_DEVICE_BUS        0
 402 #define HPSA_RAID_VOLUME_BUS            1
 403 #define HPSA_EXTERNAL_RAID_VOLUME_BUS   2
 404 #define HPSA_HBA_BUS                    3
 405
 406 /*
 407         Send the command to the hardware
 408 */
 409 static void SA5_submit_command(struct ctlr_info *h,
 410         struct CommandList *c)
 411 {
 412         writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 413         (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
 414 }
 415
 416 static void SA5_submit_command_no_read(struct ctlr_info *h,
 417         struct CommandList *c)
 418 {
 419         writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 420 }
 421
 422 static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
 423         struct CommandList *c)
 424 {
 425         writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 426 }
 427
 428 /*
 429  *  This card is the opposite of the other cards.
 430  *   0 turns interrupts on...
 431  *   0x08 turns them off...
 432  */
 433 static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
 434 {
 435         if (val) { /* Turn interrupts on */
 436                 h->interrupts_enabled = 1;
 437                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 438                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 439         } else { /* Turn them off */
 440                 h->interrupts_enabled = 0;
 441                 writel(SA5_INTR_OFF,
 442                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 443                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 444         }
 445 }
 446
 447 static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
 448 {
 449         if (val) { /* turn on interrupts */
 450                 h->interrupts_enabled = 1;
 451                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 452                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 453         } else {
 454                 h->interrupts_enabled = 0;
 455                 writel(SA5_PERF_INTR_OFF,
 456                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 457                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 458         }
 459 }
 460
 461 static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
 462 {
 463         struct reply_queue_buffer *rq = &h->reply_queue[q];
 464         unsigned long register_value = FIFO_EMPTY;
 465
 466         /* msi auto clears the interrupt pending bit. */
 467         if (unlikely(!(h->msi_vector || h->msix_vector))) {
 468                 /* flush the controller write of the reply queue by reading
 469                  * outbound doorbell status register.
 470                  */
 471                 (void) readl(h->vaddr + SA5_OUTDB_STATUS);
 472                 writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
 473                 /* Do a read in order to flush the write to the controller
 474                  * (as per spec.)
 475                  */
 476                 (void) readl(h->vaddr + SA5_OUTDB_STATUS);
 477         }
 478
 479         if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
 480                 register_value = rq->head[rq->current_entry];
 481                 rq->current_entry++;
 482                 atomic_dec(&h->commands_outstanding);
 483         } else {
 484                 register_value = FIFO_EMPTY;
 485         }
 486         /* Check for wraparound */
 487         if (rq->current_entry == h->max_commands) {
 488                 rq->current_entry = 0;
 489                 rq->wraparound ^= 1;
 490         }
 491         return register_value;
 492 }
 493
 494 /*
 495  *   returns value read from hardware.
 496  *     returns FIFO_EMPTY if there is nothing to read
 497  */
 498 static unsigned long SA5_completed(struct ctlr_info *h,
 499         __attribute__((unused)) u8 q)
 500 {
 501         unsigned long register_value
 502                 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
 503
 504         if (register_value != FIFO_EMPTY)
 505                 atomic_dec(&h->commands_outstanding);
 506
 507 #ifdef HPSA_DEBUG
 508         if (register_value != FIFO_EMPTY)
 509                 dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
 510                         register_value);
 511         else
 512                 dev_dbg(&h->pdev->dev, "FIFO Empty read\n");
 513 #endif
 514
 515         return register_value;
 516 }
 517 /*
 518  *      Returns true if an interrupt is pending..
 519  */
 520 static bool SA5_intr_pending(struct ctlr_info *h)
 521 {
 522         unsigned long register_value  =
 523                 readl(h->vaddr + SA5_INTR_STATUS);
 524         return register_value & SA5_INTR_PENDING;
 525 }
 526
 527 static bool SA5_performant_intr_pending(struct ctlr_info *h)
 528 {
 529         unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
 530
 531         if (!register_value)
 532                 return false;
 533
 534         /* Read outbound doorbell to flush */
 535         register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 536         return register_value & SA5_OUTDB_STATUS_PERF_BIT;
 537 }
 538
 539 #define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT    0x100
 540
 541 static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
 542 {
 543         unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
 544
 545         return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
 546                 true : false;
 547 }
 548
 549 #define IOACCEL_MODE1_REPLY_QUEUE_INDEX  0x1A0
 550 #define IOACCEL_MODE1_PRODUCER_INDEX     0x1B8
 551 #define IOACCEL_MODE1_CONSUMER_INDEX     0x1BC
 552 #define IOACCEL_MODE1_REPLY_UNUSED       0xFFFFFFFFFFFFFFFFULL
 553
 554 static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
 555 {
 556         u64 register_value;
 557         struct reply_queue_buffer *rq = &h->reply_queue[q];
 558
 559         BUG_ON(q >= h->nreply_queues);
 560
 561         register_value = rq->head[rq->current_entry];
 562         if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
 563                 rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
 564                 if (++rq->current_entry == rq->size)
 565                         rq->current_entry = 0;
 566                 /*
 567                  * @todo
 568                  *
 569                  * Don't really need to write the new index after each command,
 570                  * but with current driver design this is easiest.
 571                  */
 572                 wmb();
 573                 writel((q << 24) | rq->current_entry, h->vaddr +
 574                                 IOACCEL_MODE1_CONSUMER_INDEX);
 575                 atomic_dec(&h->commands_outstanding);
 576         }
 577         return (unsigned long) register_value;
 578 }
 579
 580 static struct access_method SA5_access = {
 581         SA5_submit_command,
 582         SA5_intr_mask,
 583         SA5_intr_pending,
 584         SA5_completed,
 585 };
 586
 587 static struct access_method SA5_ioaccel_mode1_access = {
 588         SA5_submit_command,
 589         SA5_performant_intr_mask,
 590         SA5_ioaccel_mode1_intr_pending,
 591         SA5_ioaccel_mode1_completed,
 592 };
 593
 594 static struct access_method SA5_ioaccel_mode2_access = {
 595         SA5_submit_command_ioaccel2,
 596         SA5_performant_intr_mask,
 597         SA5_performant_intr_pending,
 598         SA5_performant_completed,
 599 };
 600
 601 static struct access_method SA5_performant_access = {
 602         SA5_submit_command,
 603         SA5_performant_intr_mask,
 604         SA5_performant_intr_pending,
 605         SA5_performant_completed,
 606 };
 607
 608 static struct access_method SA5_performant_access_no_read = {
 609         SA5_submit_command_no_read,
 610         SA5_performant_intr_mask,
 611         SA5_performant_intr_pending,
 612         SA5_performant_completed,
 613 };
 614
 615 struct board_type {
 616         u32     board_id;
 617         char    *product_name;
 618         struct access_method *access;
 619 };
 620
 621 #endif /* HPSA_H */
 622