[PATCH] V4L: Makes needlessly global code static
[linux/fpc-iii.git] / drivers / scsi / aha152x.c
blob9df23b654cec1aa929cb3d7f5eb7ae4b3b089c67
1 /* aha152x.c -- Adaptec AHA-152x driver
2 * Author: Jürgen E. Fischer, fischer@norbit.de
3 * Copyright 1993-2004 Jürgen E. Fischer
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2, or (at your option) any
8 * later version.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
16 * $Id: aha152x.c,v 2.7 2004/01/24 11:42:59 fischer Exp $
18 * $Log: aha152x.c,v $
19 * Revision 2.7 2004/01/24 11:42:59 fischer
20 * - gather code that is not used by PCMCIA at the end
21 * - move request_region for !PCMCIA case to detection
22 * - migration to new scsi host api (remove legacy code)
23 * - free host scribble before scsi_done
24 * - fix error handling
25 * - one isapnp device added to id_table
27 * Revision 2.6 2003/10/30 20:52:47 fischer
28 * - interfaces changes for kernel 2.6
29 * - aha152x_probe_one introduced for pcmcia stub
30 * - fixed pnpdev handling
31 * - instead of allocation a new one, reuse command for request sense after check condition and reset
32 * - fixes race in is_complete
34 * Revision 2.5 2002/04/14 11:24:53 fischer
35 * - isapnp support
36 * - abort fixed
37 * - 2.5 support
39 * Revision 2.4 2000/12/16 12:53:56 fischer
40 * - allow REQUEST SENSE to be queued
41 * - handle shared PCI interrupts
43 * Revision 2.3 2000/11/04 16:40:26 fischer
44 * - handle data overruns
45 * - extend timeout for data phases
47 * Revision 2.2 2000/08/08 19:54:53 fischer
48 * - minor changes
50 * Revision 2.1 2000/05/17 16:23:17 fischer
51 * - signature update
52 * - fix for data out w/o scatter gather
54 * Revision 2.0 1999/12/25 15:07:32 fischer
55 * - interrupt routine completly reworked
56 * - basic support for new eh code
58 * Revision 1.21 1999/11/10 23:46:36 fischer
59 * - default to synchronous operation
60 * - synchronous negotiation fixed
61 * - added timeout to loops
62 * - debugging output can be controlled through procfs
64 * Revision 1.20 1999/11/07 18:37:31 fischer
65 * - synchronous operation works
66 * - resid support for sg driver
68 * Revision 1.19 1999/11/02 22:39:59 fischer
69 * - moved leading comments to README.aha152x
70 * - new additional module parameters
71 * - updates for 2.3
72 * - support for the Tripace TC1550 controller
73 * - interrupt handling changed
75 * Revision 1.18 1996/09/07 20:10:40 fischer
76 * - fixed can_queue handling (multiple outstanding commands working again)
78 * Revision 1.17 1996/08/17 16:05:14 fischer
79 * - biosparam improved
80 * - interrupt verification
81 * - updated documentation
82 * - cleanups
84 * Revision 1.16 1996/06/09 00:04:56 root
85 * - added configuration symbols for insmod (aha152x/aha152x1)
87 * Revision 1.15 1996/04/30 14:52:06 fischer
88 * - proc info fixed
89 * - support for extended translation for >1GB disks
91 * Revision 1.14 1996/01/17 15:11:20 fischer
92 * - fixed lockup in MESSAGE IN phase after reconnection
94 * Revision 1.13 1996/01/09 02:15:53 fischer
95 * - some cleanups
96 * - moved request_irq behind controller initialization
97 * (to avoid spurious interrupts)
99 * Revision 1.12 1995/12/16 12:26:07 fischer
100 * - barrier()s added
101 * - configurable RESET delay added
103 * Revision 1.11 1995/12/06 21:18:35 fischer
104 * - some minor updates
106 * Revision 1.10 1995/07/22 19:18:45 fischer
107 * - support for 2 controllers
108 * - started synchronous data transfers (not working yet)
110 * Revision 1.9 1995/03/18 09:20:24 root
111 * - patches for PCMCIA and modules
113 * Revision 1.8 1995/01/21 22:07:19 root
114 * - snarf_region => request_region
115 * - aha152x_intr interface change
117 * Revision 1.7 1995/01/02 23:19:36 root
118 * - updated COMMAND_SIZE to cmd_len
119 * - changed sti() to restore_flags()
120 * - fixed some #ifdef which generated warnings
122 * Revision 1.6 1994/11/24 20:35:27 root
123 * - problem with odd number of bytes in fifo fixed
125 * Revision 1.5 1994/10/30 14:39:56 root
126 * - abort code fixed
127 * - debugging improved
129 * Revision 1.4 1994/09/12 11:33:01 root
130 * - irqaction to request_irq
131 * - abortion updated
133 * Revision 1.3 1994/08/04 13:53:05 root
134 * - updates for mid-level-driver changes
135 * - accept unexpected BUSFREE phase as error condition
136 * - parity check now configurable
138 * Revision 1.2 1994/07/03 12:56:36 root
139 * - cleaned up debugging code
140 * - more tweaking on reset delays
141 * - updated abort/reset code (pretty untested...)
143 * Revision 1.1 1994/05/28 21:18:49 root
144 * - update for mid-level interface change (abort-reset)
145 * - delays after resets adjusted for some slow devices
147 * Revision 1.0 1994/03/25 12:52:00 root
148 * - Fixed "more data than expected" problem
149 * - added new BIOS signatures
151 * Revision 0.102 1994/01/31 20:44:12 root
152 * - minor changes in insw/outsw handling
154 * Revision 0.101 1993/12/13 01:16:27 root
155 * - fixed STATUS phase (non-GOOD stati were dropped sometimes;
156 * fixes problems with CD-ROM sector size detection & media change)
158 * Revision 0.100 1993/12/10 16:58:47 root
159 * - fix for unsuccessful selections in case of non-continuous id assignments
160 * on the scsi bus.
162 * Revision 0.99 1993/10/24 16:19:59 root
163 * - fixed DATA IN (rare read errors gone)
165 * Revision 0.98 1993/10/17 12:54:44 root
166 * - fixed some recent fixes (shame on me)
167 * - moved initialization of scratch area to aha152x_queue
169 * Revision 0.97 1993/10/09 18:53:53 root
170 * - DATA IN fixed. Rarely left data in the fifo.
172 * Revision 0.96 1993/10/03 00:53:59 root
173 * - minor changes on DATA IN
175 * Revision 0.95 1993/09/24 10:36:01 root
176 * - change handling of MSGI after reselection
177 * - fixed sti/cli
178 * - minor changes
180 * Revision 0.94 1993/09/18 14:08:22 root
181 * - fixed bug in multiple outstanding command code
182 * - changed detection
183 * - support for kernel command line configuration
184 * - reset corrected
185 * - changed message handling
187 * Revision 0.93 1993/09/15 20:41:19 root
188 * - fixed bugs with multiple outstanding commands
190 * Revision 0.92 1993/09/13 02:46:33 root
191 * - multiple outstanding commands work (no problems with IBM drive)
193 * Revision 0.91 1993/09/12 20:51:46 root
194 * added multiple outstanding commands
195 * (some problem with this $%&? IBM device remain)
197 * Revision 0.9 1993/09/12 11:11:22 root
198 * - corrected auto-configuration
199 * - changed the auto-configuration (added some '#define's)
200 * - added support for dis-/reconnection
202 * Revision 0.8 1993/09/06 23:09:39 root
203 * - added support for the drive activity light
204 * - minor changes
206 * Revision 0.7 1993/09/05 14:30:15 root
207 * - improved phase detection
208 * - now using the new snarf_region code of 0.99pl13
210 * Revision 0.6 1993/09/02 11:01:38 root
211 * first public release; added some signatures and biosparam()
213 * Revision 0.5 1993/08/30 10:23:30 root
214 * fixed timing problems with my IBM drive
216 * Revision 0.4 1993/08/29 14:06:52 root
217 * fixed some problems with timeouts due incomplete commands
219 * Revision 0.3 1993/08/28 15:55:03 root
220 * writing data works too. mounted and worked on a dos partition
222 * Revision 0.2 1993/08/27 22:42:07 root
223 * reading data works. Mounted a msdos partition.
225 * Revision 0.1 1993/08/25 13:38:30 root
226 * first "damn thing doesn't work" version
228 * Revision 0.0 1993/08/14 19:54:25 root
229 * empty function bodies; detect() works.
232 **************************************************************************
234 see Documentation/scsi/aha152x.txt for configuration details
236 **************************************************************************/
238 #include <linux/module.h>
239 #include <linux/sched.h>
240 #include <asm/irq.h>
241 #include <asm/io.h>
242 #include <linux/blkdev.h>
243 #include <asm/system.h>
244 #include <linux/errno.h>
245 #include <linux/string.h>
246 #include <linux/wait.h>
247 #include <linux/ioport.h>
248 #include <linux/delay.h>
249 #include <linux/proc_fs.h>
250 #include <linux/interrupt.h>
251 #include <linux/init.h>
252 #include <linux/kernel.h>
253 #include <linux/isapnp.h>
254 #include <linux/spinlock.h>
255 #include <linux/workqueue.h>
256 #include <asm/semaphore.h>
257 #include <scsi/scsicam.h>
259 #include "scsi.h"
260 #include <scsi/scsi_dbg.h>
261 #include <scsi/scsi_host.h>
262 #include "aha152x.h"
265 /* DEFINES */
267 /* For PCMCIA cards, always use AUTOCONF */
268 #if defined(PCMCIA) || defined(MODULE)
269 #if !defined(AUTOCONF)
270 #define AUTOCONF
271 #endif
272 #endif
274 #if !defined(AUTOCONF) && !defined(SETUP0)
275 #error define AUTOCONF or SETUP0
276 #endif
278 #if defined(AHA152X_DEBUG)
279 #define DEBUG_DEFAULT debug_eh
281 #define DPRINTK(when,msgs...) \
282 do { if(HOSTDATA(shpnt)->debug & (when)) printk(msgs); } while(0)
284 #define DO_LOCK(flags) \
285 do { \
286 if(spin_is_locked(&QLOCK)) { \
287 DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
289 DPRINTK(debug_locks, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
290 spin_lock_irqsave(&QLOCK,flags); \
291 DPRINTK(debug_locks, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
292 QLOCKER=__FUNCTION__; \
293 QLOCKERL=__LINE__; \
294 } while(0)
296 #define DO_UNLOCK(flags) \
297 do { \
298 DPRINTK(debug_locks, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
299 spin_unlock_irqrestore(&QLOCK,flags); \
300 DPRINTK(debug_locks, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
301 QLOCKER="(not locked)"; \
302 QLOCKERL=0; \
303 } while(0)
305 #else
306 #define DPRINTK(when,msgs...)
307 #define DO_LOCK(flags) spin_lock_irqsave(&QLOCK,flags)
308 #define DO_UNLOCK(flags) spin_unlock_irqrestore(&QLOCK,flags)
309 #endif
311 #define LEAD "(scsi%d:%d:%d) "
312 #define WARN_LEAD KERN_WARNING LEAD
313 #define INFO_LEAD KERN_INFO LEAD
314 #define NOTE_LEAD KERN_NOTICE LEAD
315 #define ERR_LEAD KERN_ERR LEAD
316 #define DEBUG_LEAD KERN_DEBUG LEAD
317 #define CMDINFO(cmd) \
318 (cmd) ? ((cmd)->device->host->host_no) : -1, \
319 (cmd) ? ((cmd)->device->id & 0x0f) : -1, \
320 (cmd) ? ((cmd)->device->lun & 0x07) : -1
322 #define DELAY_DEFAULT 1000
324 #if defined(PCMCIA)
325 #define IRQ_MIN 0
326 #define IRQ_MAX 16
327 #else
328 #define IRQ_MIN 9
329 #if defined(__PPC)
330 #define IRQ_MAX (NR_IRQS-1)
331 #else
332 #define IRQ_MAX 12
333 #endif
334 #endif
336 enum {
337 not_issued = 0x0001, /* command not yet issued */
338 selecting = 0x0002, /* target is beeing selected */
339 identified = 0x0004, /* IDENTIFY was sent */
340 disconnected = 0x0008, /* target disconnected */
341 completed = 0x0010, /* target sent COMMAND COMPLETE */
342 aborted = 0x0020, /* ABORT was sent */
343 resetted = 0x0040, /* BUS DEVICE RESET was sent */
344 spiordy = 0x0080, /* waiting for SPIORDY to raise */
345 syncneg = 0x0100, /* synchronous negotiation in progress */
346 aborting = 0x0200, /* ABORT is pending */
347 resetting = 0x0400, /* BUS DEVICE RESET is pending */
348 check_condition = 0x0800, /* requesting sense after CHECK CONDITION */
351 MODULE_AUTHOR("Jürgen Fischer");
352 MODULE_DESCRIPTION(AHA152X_REVID);
353 MODULE_LICENSE("GPL");
355 #if !defined(PCMCIA)
356 #if defined(MODULE)
357 static int io[] = {0, 0};
358 module_param_array(io, int, NULL, 0);
359 MODULE_PARM_DESC(io,"base io address of controller");
361 static int irq[] = {0, 0};
362 module_param_array(irq, int, NULL, 0);
363 MODULE_PARM_DESC(irq,"interrupt for controller");
365 static int scsiid[] = {7, 7};
366 module_param_array(scsiid, int, NULL, 0);
367 MODULE_PARM_DESC(scsiid,"scsi id of controller");
369 static int reconnect[] = {1, 1};
370 module_param_array(reconnect, int, NULL, 0);
371 MODULE_PARM_DESC(reconnect,"allow targets to disconnect");
373 static int parity[] = {1, 1};
374 module_param_array(parity, int, NULL, 0);
375 MODULE_PARM_DESC(parity,"use scsi parity");
377 static int sync[] = {1, 1};
378 module_param_array(sync, int, NULL, 0);
379 MODULE_PARM_DESC(sync,"use synchronous transfers");
381 static int delay[] = {DELAY_DEFAULT, DELAY_DEFAULT};
382 module_param_array(delay, int, NULL, 0);
383 MODULE_PARM_DESC(delay,"scsi reset delay");
385 static int exttrans[] = {0, 0};
386 module_param_array(exttrans, int, NULL, 0);
387 MODULE_PARM_DESC(exttrans,"use extended translation");
389 #if !defined(AHA152X_DEBUG)
390 static int aha152x[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
391 module_param_array(aha152x, int, NULL, 0);
392 MODULE_PARM_DESC(aha152x, "parameters for first controller");
394 static int aha152x1[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
395 module_param_array(aha152x1, int, NULL, 0);
396 MODULE_PARM_DESC(aha152x1, "parameters for second controller");
397 #else
398 static int debug[] = {DEBUG_DEFAULT, DEBUG_DEFAULT};
399 module_param_array(debug, int, NULL, 0);
400 MODULE_PARM_DESC(debug, "flags for driver debugging");
402 static int aha152x[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
403 module_param_array(aha152x, int, NULL, 0);
404 MODULE_PARM_DESC(aha152x, "parameters for first controller");
406 static int aha152x1[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
407 module_param_array(aha152x1, int, NULL, 0);
408 MODULE_PARM_DESC(aha152x1, "parameters for second controller");
409 #endif /* !defined(AHA152X_DEBUG) */
410 #endif /* MODULE */
412 #ifdef __ISAPNP__
413 static struct isapnp_device_id id_table[] __devinitdata = {
414 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
415 ISAPNP_VENDOR('A','D','P'), ISAPNP_FUNCTION(0x1505), 0 },
416 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
417 ISAPNP_VENDOR('A','D','P'), ISAPNP_FUNCTION(0x1530), 0 },
418 { ISAPNP_DEVICE_SINGLE_END, }
420 MODULE_DEVICE_TABLE(isapnp, id_table);
421 #endif /* ISAPNP */
423 #endif /* !PCMCIA */
425 static int registered_count=0;
426 static struct Scsi_Host *aha152x_host[2];
427 static struct scsi_host_template aha152x_driver_template;
430 * internal states of the host
433 enum aha152x_state {
434 idle=0,
435 unknown,
436 seldo,
437 seldi,
438 selto,
439 busfree,
440 msgo,
441 cmd,
442 msgi,
443 status,
444 datai,
445 datao,
446 parerr,
447 rsti,
448 maxstate
452 * current state information of the host
455 struct aha152x_hostdata {
456 Scsi_Cmnd *issue_SC;
457 /* pending commands to issue */
459 Scsi_Cmnd *current_SC;
460 /* current command on the bus */
462 Scsi_Cmnd *disconnected_SC;
463 /* commands that disconnected */
465 Scsi_Cmnd *done_SC;
466 /* command that was completed */
468 spinlock_t lock;
469 /* host lock */
471 #if defined(AHA152X_DEBUG)
472 const char *locker;
473 /* which function has the lock */
474 int lockerl; /* where did it get it */
476 int debug; /* current debugging setting */
477 #endif
479 #if defined(AHA152X_STAT)
480 int total_commands;
481 int disconnections;
482 int busfree_without_any_action;
483 int busfree_without_old_command;
484 int busfree_without_new_command;
485 int busfree_without_done_command;
486 int busfree_with_check_condition;
487 int count[maxstate];
488 int count_trans[maxstate];
489 unsigned long time[maxstate];
490 #endif
492 int commands; /* current number of commands */
494 int reconnect; /* disconnection allowed */
495 int parity; /* parity checking enabled */
496 int synchronous; /* synchronous transferes enabled */
497 int delay; /* reset out delay */
498 int ext_trans; /* extended translation enabled */
500 int swint; /* software-interrupt was fired during detect() */
501 int service; /* bh needs to be run */
502 int in_intr; /* bh is running */
504 /* current state,
505 previous state,
506 last state different from current state */
507 enum aha152x_state state, prevstate, laststate;
509 int target;
510 /* reconnecting target */
512 unsigned char syncrate[8];
513 /* current synchronous transfer agreements */
515 unsigned char syncneg[8];
516 /* 0: no negotiation;
517 * 1: negotiation in progress;
518 * 2: negotiation completed
521 int cmd_i;
522 /* number of sent bytes of current command */
524 int msgi_len;
525 /* number of received message bytes */
526 unsigned char msgi[256];
527 /* received message bytes */
529 int msgo_i, msgo_len;
530 /* number of sent bytes and length of current messages */
531 unsigned char msgo[256];
532 /* pending messages */
534 int data_len;
535 /* number of sent/received bytes in dataphase */
537 unsigned long io_port0;
538 unsigned long io_port1;
540 #ifdef __ISAPNP__
541 struct pnp_dev *pnpdev;
542 #endif
547 * host specific command extension
550 struct aha152x_scdata {
551 Scsi_Cmnd *next; /* next sc in queue */
552 struct semaphore *sem; /* semaphore to block on */
556 /* access macros for hostdata */
558 #define HOSTDATA(shpnt) ((struct aha152x_hostdata *) &shpnt->hostdata)
560 #define HOSTNO ((shpnt)->host_no)
562 #define CURRENT_SC (HOSTDATA(shpnt)->current_SC)
563 #define DONE_SC (HOSTDATA(shpnt)->done_SC)
564 #define ISSUE_SC (HOSTDATA(shpnt)->issue_SC)
565 #define DISCONNECTED_SC (HOSTDATA(shpnt)->disconnected_SC)
566 #define QLOCK (HOSTDATA(shpnt)->lock)
567 #define QLOCKER (HOSTDATA(shpnt)->locker)
568 #define QLOCKERL (HOSTDATA(shpnt)->lockerl)
570 #define STATE (HOSTDATA(shpnt)->state)
571 #define PREVSTATE (HOSTDATA(shpnt)->prevstate)
572 #define LASTSTATE (HOSTDATA(shpnt)->laststate)
574 #define RECONN_TARGET (HOSTDATA(shpnt)->target)
576 #define CMD_I (HOSTDATA(shpnt)->cmd_i)
578 #define MSGO(i) (HOSTDATA(shpnt)->msgo[i])
579 #define MSGO_I (HOSTDATA(shpnt)->msgo_i)
580 #define MSGOLEN (HOSTDATA(shpnt)->msgo_len)
581 #define ADDMSGO(x) (MSGOLEN<256 ? (void)(MSGO(MSGOLEN++)=x) : aha152x_error(shpnt,"MSGO overflow"))
583 #define MSGI(i) (HOSTDATA(shpnt)->msgi[i])
584 #define MSGILEN (HOSTDATA(shpnt)->msgi_len)
585 #define ADDMSGI(x) (MSGILEN<256 ? (void)(MSGI(MSGILEN++)=x) : aha152x_error(shpnt,"MSGI overflow"))
587 #define DATA_LEN (HOSTDATA(shpnt)->data_len)
589 #define SYNCRATE (HOSTDATA(shpnt)->syncrate[CURRENT_SC->device->id])
590 #define SYNCNEG (HOSTDATA(shpnt)->syncneg[CURRENT_SC->device->id])
592 #define DELAY (HOSTDATA(shpnt)->delay)
593 #define EXT_TRANS (HOSTDATA(shpnt)->ext_trans)
594 #define TC1550 (HOSTDATA(shpnt)->tc1550)
595 #define RECONNECT (HOSTDATA(shpnt)->reconnect)
596 #define PARITY (HOSTDATA(shpnt)->parity)
597 #define SYNCHRONOUS (HOSTDATA(shpnt)->synchronous)
599 #define HOSTIOPORT0 (HOSTDATA(shpnt)->io_port0)
600 #define HOSTIOPORT1 (HOSTDATA(shpnt)->io_port1)
602 #define SCDATA(SCpnt) ((struct aha152x_scdata *) (SCpnt)->host_scribble)
603 #define SCNEXT(SCpnt) SCDATA(SCpnt)->next
604 #define SCSEM(SCpnt) SCDATA(SCpnt)->sem
606 #define SG_ADDRESS(buffer) ((char *) (page_address((buffer)->page)+(buffer)->offset))
608 /* state handling */
609 static void seldi_run(struct Scsi_Host *shpnt);
610 static void seldo_run(struct Scsi_Host *shpnt);
611 static void selto_run(struct Scsi_Host *shpnt);
612 static void busfree_run(struct Scsi_Host *shpnt);
614 static void msgo_init(struct Scsi_Host *shpnt);
615 static void msgo_run(struct Scsi_Host *shpnt);
616 static void msgo_end(struct Scsi_Host *shpnt);
618 static void cmd_init(struct Scsi_Host *shpnt);
619 static void cmd_run(struct Scsi_Host *shpnt);
620 static void cmd_end(struct Scsi_Host *shpnt);
622 static void datai_init(struct Scsi_Host *shpnt);
623 static void datai_run(struct Scsi_Host *shpnt);
624 static void datai_end(struct Scsi_Host *shpnt);
626 static void datao_init(struct Scsi_Host *shpnt);
627 static void datao_run(struct Scsi_Host *shpnt);
628 static void datao_end(struct Scsi_Host *shpnt);
630 static void status_run(struct Scsi_Host *shpnt);
632 static void msgi_run(struct Scsi_Host *shpnt);
633 static void msgi_end(struct Scsi_Host *shpnt);
635 static void parerr_run(struct Scsi_Host *shpnt);
636 static void rsti_run(struct Scsi_Host *shpnt);
638 static void is_complete(struct Scsi_Host *shpnt);
641 * driver states
644 static struct {
645 char *name;
646 void (*init)(struct Scsi_Host *);
647 void (*run)(struct Scsi_Host *);
648 void (*end)(struct Scsi_Host *);
649 int spio;
650 } states[] = {
651 { "idle", NULL, NULL, NULL, 0},
652 { "unknown", NULL, NULL, NULL, 0},
653 { "seldo", NULL, seldo_run, NULL, 0},
654 { "seldi", NULL, seldi_run, NULL, 0},
655 { "selto", NULL, selto_run, NULL, 0},
656 { "busfree", NULL, busfree_run, NULL, 0},
657 { "msgo", msgo_init, msgo_run, msgo_end, 1},
658 { "cmd", cmd_init, cmd_run, cmd_end, 1},
659 { "msgi", NULL, msgi_run, msgi_end, 1},
660 { "status", NULL, status_run, NULL, 1},
661 { "datai", datai_init, datai_run, datai_end, 0},
662 { "datao", datao_init, datao_run, datao_end, 0},
663 { "parerr", NULL, parerr_run, NULL, 0},
664 { "rsti", NULL, rsti_run, NULL, 0},
667 /* setup & interrupt */
668 static irqreturn_t intr(int irq, void *dev_id, struct pt_regs *);
669 static void reset_ports(struct Scsi_Host *shpnt);
670 static void aha152x_error(struct Scsi_Host *shpnt, char *msg);
671 static void done(struct Scsi_Host *shpnt, int error);
673 /* diagnostics */
674 static void disp_ports(struct Scsi_Host *shpnt);
675 static void show_command(Scsi_Cmnd * ptr);
676 static void show_queues(struct Scsi_Host *shpnt);
677 static void disp_enintr(struct Scsi_Host *shpnt);
681 * queue services:
684 static inline void append_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC)
686 Scsi_Cmnd *end;
688 SCNEXT(new_SC) = NULL;
689 if (!*SC)
690 *SC = new_SC;
691 else {
692 for (end = *SC; SCNEXT(end); end = SCNEXT(end))
694 SCNEXT(end) = new_SC;
698 static inline Scsi_Cmnd *remove_first_SC(Scsi_Cmnd ** SC)
700 Scsi_Cmnd *ptr;
702 ptr = *SC;
703 if (ptr) {
704 *SC = SCNEXT(*SC);
705 SCNEXT(ptr)=NULL;
707 return ptr;
710 static inline Scsi_Cmnd *remove_lun_SC(Scsi_Cmnd ** SC, int target, int lun)
712 Scsi_Cmnd *ptr, *prev;
714 for (ptr = *SC, prev = NULL;
715 ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
716 prev = ptr, ptr = SCNEXT(ptr))
719 if (ptr) {
720 if (prev)
721 SCNEXT(prev) = SCNEXT(ptr);
722 else
723 *SC = SCNEXT(ptr);
725 SCNEXT(ptr)=NULL;
728 return ptr;
731 static inline Scsi_Cmnd *remove_SC(Scsi_Cmnd **SC, Scsi_Cmnd *SCp)
733 Scsi_Cmnd *ptr, *prev;
735 for (ptr = *SC, prev = NULL;
736 ptr && SCp!=ptr;
737 prev = ptr, ptr = SCNEXT(ptr))
740 if (ptr) {
741 if (prev)
742 SCNEXT(prev) = SCNEXT(ptr);
743 else
744 *SC = SCNEXT(ptr);
746 SCNEXT(ptr)=NULL;
749 return ptr;
752 static inline struct Scsi_Host *lookup_irq(int irqno)
754 int i;
756 for(i=0; i<ARRAY_SIZE(aha152x_host); i++)
757 if(aha152x_host[i] && aha152x_host[i]->irq==irqno)
758 return aha152x_host[i];
760 return NULL;
763 static irqreturn_t swintr(int irqno, void *dev_id, struct pt_regs *regs)
765 struct Scsi_Host *shpnt = lookup_irq(irqno);
767 if (!shpnt) {
768 printk(KERN_ERR "aha152x: catched software interrupt %d for unknown controller.\n", irqno);
769 return IRQ_NONE;
772 HOSTDATA(shpnt)->swint++;
774 SETPORT(DMACNTRL0, INTEN);
775 return IRQ_HANDLED;
778 struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup)
780 struct Scsi_Host *shpnt;
782 shpnt = scsi_host_alloc(&aha152x_driver_template, sizeof(struct aha152x_hostdata));
783 if (!shpnt) {
784 printk(KERN_ERR "aha152x: scsi_host_alloc failed\n");
785 return NULL;
788 /* need to have host registered before triggering any interrupt */
789 aha152x_host[registered_count] = shpnt;
791 memset(HOSTDATA(shpnt), 0, sizeof *HOSTDATA(shpnt));
793 shpnt->io_port = setup->io_port;
794 shpnt->n_io_port = IO_RANGE;
795 shpnt->irq = setup->irq;
797 if (!setup->tc1550) {
798 HOSTIOPORT0 = setup->io_port;
799 HOSTIOPORT1 = setup->io_port;
800 } else {
801 HOSTIOPORT0 = setup->io_port+0x10;
802 HOSTIOPORT1 = setup->io_port-0x10;
805 spin_lock_init(&QLOCK);
806 RECONNECT = setup->reconnect;
807 SYNCHRONOUS = setup->synchronous;
808 PARITY = setup->parity;
809 DELAY = setup->delay;
810 EXT_TRANS = setup->ext_trans;
812 #if defined(AHA152X_DEBUG)
813 HOSTDATA(shpnt)->debug = setup->debug;
814 #endif
816 SETPORT(SCSIID, setup->scsiid << 4);
817 shpnt->this_id = setup->scsiid;
819 if (setup->reconnect)
820 shpnt->can_queue = AHA152X_MAXQUEUE;
822 /* RESET OUT */
823 printk("aha152x: resetting bus...\n");
824 SETPORT(SCSISEQ, SCSIRSTO);
825 mdelay(256);
826 SETPORT(SCSISEQ, 0);
827 mdelay(DELAY);
829 reset_ports(shpnt);
831 printk(KERN_INFO
832 "aha152x%d%s: "
833 "vital data: rev=%x, "
834 "io=0x%03lx (0x%03lx/0x%03lx), "
835 "irq=%d, "
836 "scsiid=%d, "
837 "reconnect=%s, "
838 "parity=%s, "
839 "synchronous=%s, "
840 "delay=%d, "
841 "extended translation=%s\n",
842 shpnt->host_no, setup->tc1550 ? " (tc1550 mode)" : "",
843 GETPORT(REV) & 0x7,
844 shpnt->io_port, HOSTIOPORT0, HOSTIOPORT1,
845 shpnt->irq,
846 shpnt->this_id,
847 RECONNECT ? "enabled" : "disabled",
848 PARITY ? "enabled" : "disabled",
849 SYNCHRONOUS ? "enabled" : "disabled",
850 DELAY,
851 EXT_TRANS ? "enabled" : "disabled");
853 /* not expecting any interrupts */
854 SETPORT(SIMODE0, 0);
855 SETPORT(SIMODE1, 0);
857 if( request_irq(shpnt->irq, swintr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
858 printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
859 goto out_host_put;
862 HOSTDATA(shpnt)->swint = 0;
864 printk(KERN_INFO "aha152x%d: trying software interrupt, ", shpnt->host_no);
866 mb();
867 SETPORT(DMACNTRL0, SWINT|INTEN);
868 mdelay(1000);
869 free_irq(shpnt->irq, shpnt);
871 if (!HOSTDATA(shpnt)->swint) {
872 if (TESTHI(DMASTAT, INTSTAT)) {
873 printk("lost.\n");
874 } else {
875 printk("failed.\n");
878 SETPORT(DMACNTRL0, INTEN);
880 printk(KERN_ERR "aha152x%d: irq %d possibly wrong. "
881 "Please verify.\n", shpnt->host_no, shpnt->irq);
882 goto out_host_put;
884 printk("ok.\n");
887 /* clear interrupts */
888 SETPORT(SSTAT0, 0x7f);
889 SETPORT(SSTAT1, 0xef);
891 if ( request_irq(shpnt->irq, intr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) {
892 printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
893 goto out_host_put;
896 if( scsi_add_host(shpnt, NULL) ) {
897 free_irq(shpnt->irq, shpnt);
898 printk(KERN_ERR "aha152x%d: failed to add host.\n", shpnt->host_no);
899 goto out_host_put;
902 scsi_scan_host(shpnt);
904 registered_count++;
906 return shpnt;
908 out_host_put:
909 aha152x_host[registered_count]=NULL;
910 scsi_host_put(shpnt);
912 return NULL;
915 void aha152x_release(struct Scsi_Host *shpnt)
917 if(!shpnt)
918 return;
920 if (shpnt->irq)
921 free_irq(shpnt->irq, shpnt);
923 #if !defined(PCMCIA)
924 if (shpnt->io_port)
925 release_region(shpnt->io_port, IO_RANGE);
926 #endif
928 #ifdef __ISAPNP__
929 if (HOSTDATA(shpnt)->pnpdev)
930 pnp_device_detach(HOSTDATA(shpnt)->pnpdev);
931 #endif
933 scsi_remove_host(shpnt);
934 scsi_host_put(shpnt);
939 * setup controller to generate interrupts depending
940 * on current state (lock has to be acquired)
943 static int setup_expected_interrupts(struct Scsi_Host *shpnt)
945 if(CURRENT_SC) {
946 CURRENT_SC->SCp.phase |= 1 << 16;
948 if(CURRENT_SC->SCp.phase & selecting) {
949 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (seldo) (seltimo) (seldi)\n", CMDINFO(CURRENT_SC));
950 SETPORT(SSTAT1, SELTO);
951 SETPORT(SIMODE0, ENSELDO | (DISCONNECTED_SC ? ENSELDI : 0));
952 SETPORT(SIMODE1, ENSELTIMO);
953 } else {
954 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (busfree) %s\n", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.phase & spiordy ? "(spiordy)" : "");
955 SETPORT(SIMODE0, (CURRENT_SC->SCp.phase & spiordy) ? ENSPIORDY : 0);
956 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
958 } else if(STATE==seldi) {
959 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (identify)\n", CMDINFO(CURRENT_SC));
960 SETPORT(SIMODE0, 0);
961 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
962 } else {
963 DPRINTK(debug_intr, DEBUG_LEAD "expecting: %s %s\n",
964 CMDINFO(CURRENT_SC),
965 DISCONNECTED_SC ? "(reselection)" : "",
966 ISSUE_SC ? "(busfree)" : "");
967 SETPORT(SIMODE0, DISCONNECTED_SC ? ENSELDI : 0);
968 SETPORT(SIMODE1, ENSCSIRST | ( (ISSUE_SC||DONE_SC) ? ENBUSFREE : 0));
971 if(!HOSTDATA(shpnt)->in_intr)
972 SETBITS(DMACNTRL0, INTEN);
974 return TESTHI(DMASTAT, INTSTAT);
979 * Queue a command and setup interrupts for a free bus.
981 static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int phase, void (*done)(Scsi_Cmnd *))
983 struct Scsi_Host *shpnt = SCpnt->device->host;
984 unsigned long flags;
986 #if defined(AHA152X_DEBUG)
987 if (HOSTDATA(shpnt)->debug & debug_queue) {
988 printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=",
989 CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len, SCpnt->use_sg, SCpnt->request_bufflen);
990 __scsi_print_command(SCpnt->cmnd);
992 #endif
994 SCpnt->scsi_done = done;
995 SCpnt->resid = SCpnt->request_bufflen;
996 SCpnt->SCp.phase = not_issued | phase;
997 SCpnt->SCp.Status = CHECK_CONDITION;
998 SCpnt->SCp.Message = 0;
999 SCpnt->SCp.have_data_in = 0;
1000 SCpnt->SCp.sent_command = 0;
1002 if(SCpnt->SCp.phase & (resetting|check_condition)) {
1003 if(SCpnt->host_scribble==0 || SCSEM(SCpnt) || SCNEXT(SCpnt)) {
1004 printk(ERR_LEAD "cannot reuse command\n", CMDINFO(SCpnt));
1005 return FAILED;
1007 } else {
1008 SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
1009 if(SCpnt->host_scribble==0) {
1010 printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
1011 return FAILED;
1015 SCNEXT(SCpnt) = NULL;
1016 SCSEM(SCpnt) = sem;
1018 /* setup scratch area
1019 SCp.ptr : buffer pointer
1020 SCp.this_residual : buffer length
1021 SCp.buffer : next buffer
1022 SCp.buffers_residual : left buffers in list
1023 SCp.phase : current state of the command */
1024 if (SCpnt->use_sg) {
1025 SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
1026 SCpnt->SCp.ptr = SG_ADDRESS(SCpnt->SCp.buffer);
1027 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
1028 SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
1029 } else {
1030 SCpnt->SCp.ptr = (char *) SCpnt->request_buffer;
1031 SCpnt->SCp.this_residual = SCpnt->request_bufflen;
1032 SCpnt->SCp.buffer = NULL;
1033 SCpnt->SCp.buffers_residual = 0;
1036 DO_LOCK(flags);
1038 #if defined(AHA152X_STAT)
1039 HOSTDATA(shpnt)->total_commands++;
1040 #endif
1042 /* Turn led on, when this is the first command. */
1043 HOSTDATA(shpnt)->commands++;
1044 if (HOSTDATA(shpnt)->commands==1)
1045 SETPORT(PORTA, 1);
1047 append_SC(&ISSUE_SC, SCpnt);
1049 if(!HOSTDATA(shpnt)->in_intr)
1050 setup_expected_interrupts(shpnt);
1052 DO_UNLOCK(flags);
1054 return 0;
1058 * queue a command
1061 static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
1063 #if 0
1064 if(*SCpnt->cmnd == REQUEST_SENSE) {
1065 SCpnt->result = 0;
1066 done(SCpnt);
1068 return 0;
1070 #endif
1072 return aha152x_internal_queue(SCpnt, NULL, 0, done);
1080 static void reset_done(Scsi_Cmnd *SCpnt)
1082 #if 0
1083 struct Scsi_Host *shpnt = SCpnt->host;
1084 DPRINTK(debug_eh, INFO_LEAD "reset_done called\n", CMDINFO(SCpnt));
1085 #endif
1086 if(SCSEM(SCpnt)) {
1087 up(SCSEM(SCpnt));
1088 } else {
1089 printk(KERN_ERR "aha152x: reset_done w/o semaphore\n");
1094 * Abort a command
1097 static int aha152x_abort(Scsi_Cmnd *SCpnt)
1099 struct Scsi_Host *shpnt = SCpnt->device->host;
1100 Scsi_Cmnd *ptr;
1101 unsigned long flags;
1103 #if defined(AHA152X_DEBUG)
1104 if(HOSTDATA(shpnt)->debug & debug_eh) {
1105 printk(DEBUG_LEAD "abort(%p)", CMDINFO(SCpnt), SCpnt);
1106 show_queues(shpnt);
1108 #endif
1110 DO_LOCK(flags);
1112 ptr=remove_SC(&ISSUE_SC, SCpnt);
1114 if(ptr) {
1115 DPRINTK(debug_eh, DEBUG_LEAD "not yet issued - SUCCESS\n", CMDINFO(SCpnt));
1117 HOSTDATA(shpnt)->commands--;
1118 if (!HOSTDATA(shpnt)->commands)
1119 SETPORT(PORTA, 0);
1120 DO_UNLOCK(flags);
1122 kfree(SCpnt->host_scribble);
1123 SCpnt->host_scribble=NULL;
1125 return SUCCESS;
1128 DO_UNLOCK(flags);
1131 * FIXME:
1132 * for current command: queue ABORT for message out and raise ATN
1133 * for disconnected command: pseudo SC with ABORT message or ABORT on reselection?
1137 printk(ERR_LEAD "cannot abort running or disconnected command\n", CMDINFO(SCpnt));
1139 return FAILED;
1142 static void timer_expired(unsigned long p)
1144 Scsi_Cmnd *SCp = (Scsi_Cmnd *)p;
1145 struct semaphore *sem = SCSEM(SCp);
1146 struct Scsi_Host *shpnt = SCp->device->host;
1147 unsigned long flags;
1149 /* remove command from issue queue */
1150 DO_LOCK(flags);
1151 remove_SC(&ISSUE_SC, SCp);
1152 DO_UNLOCK(flags);
1154 up(sem);
1158 * Reset a device
1161 static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
1163 struct Scsi_Host *shpnt = SCpnt->device->host;
1164 DECLARE_MUTEX_LOCKED(sem);
1165 struct timer_list timer;
1166 int ret, issued, disconnected;
1167 unsigned long flags;
1169 #if defined(AHA152X_DEBUG)
1170 if(HOSTDATA(shpnt)->debug & debug_eh) {
1171 printk(INFO_LEAD "aha152x_device_reset(%p)", CMDINFO(SCpnt), SCpnt);
1172 show_queues(shpnt);
1174 #endif
1176 if(CURRENT_SC==SCpnt) {
1177 printk(ERR_LEAD "cannot reset current device\n", CMDINFO(SCpnt));
1178 return FAILED;
1181 DO_LOCK(flags);
1182 issued = remove_SC(&ISSUE_SC, SCpnt)==0;
1183 disconnected = issued && remove_SC(&DISCONNECTED_SC, SCpnt);
1184 DO_UNLOCK(flags);
1186 SCpnt->cmd_len = 0;
1187 SCpnt->use_sg = 0;
1188 SCpnt->request_buffer = NULL;
1189 SCpnt->request_bufflen = 0;
1191 init_timer(&timer);
1192 timer.data = (unsigned long) SCpnt;
1193 timer.expires = jiffies + 100*HZ; /* 10s */
1194 timer.function = (void (*)(unsigned long)) timer_expired;
1196 aha152x_internal_queue(SCpnt, &sem, resetting, reset_done);
1197 add_timer(&timer);
1198 down(&sem);
1199 del_timer(&timer);
1201 SCpnt->cmd_len = SCpnt->old_cmd_len;
1202 SCpnt->use_sg = SCpnt->old_use_sg;
1203 SCpnt->request_buffer = SCpnt->buffer;
1204 SCpnt->request_bufflen = SCpnt->bufflen;
1206 DO_LOCK(flags);
1208 if(SCpnt->SCp.phase & resetted) {
1209 HOSTDATA(shpnt)->commands--;
1210 if (!HOSTDATA(shpnt)->commands)
1211 SETPORT(PORTA, 0);
1212 kfree(SCpnt->host_scribble);
1213 SCpnt->host_scribble=NULL;
1215 ret = SUCCESS;
1216 } else {
1217 /* requeue */
1218 if(!issued) {
1219 append_SC(&ISSUE_SC, SCpnt);
1220 } else if(disconnected) {
1221 append_SC(&DISCONNECTED_SC, SCpnt);
1224 ret = FAILED;
1227 DO_UNLOCK(flags);
1228 return ret;
1231 static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs)
1233 Scsi_Cmnd *ptr;
1235 ptr=*SCs;
1236 while(ptr) {
1237 Scsi_Cmnd *next;
1239 if(SCDATA(ptr)) {
1240 next = SCNEXT(ptr);
1241 } else {
1242 printk(DEBUG_LEAD "queue corrupted at %p\n", CMDINFO(ptr), ptr);
1243 next = NULL;
1246 if (!ptr->device->soft_reset) {
1247 DPRINTK(debug_eh, DEBUG_LEAD "disconnected command %p removed\n", CMDINFO(ptr), ptr);
1248 remove_SC(SCs, ptr);
1249 HOSTDATA(shpnt)->commands--;
1250 kfree(ptr->host_scribble);
1251 ptr->host_scribble=NULL;
1254 ptr = next;
1259 * Reset the bus
1262 static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
1264 struct Scsi_Host *shpnt = SCpnt->device->host;
1265 unsigned long flags;
1267 DO_LOCK(flags);
1269 #if defined(AHA152X_DEBUG)
1270 if(HOSTDATA(shpnt)->debug & debug_eh) {
1271 printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
1272 show_queues(shpnt);
1274 #endif
1276 free_hard_reset_SCs(shpnt, &ISSUE_SC);
1277 free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
1279 DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
1281 SETPORT(SCSISEQ, SCSIRSTO);
1282 mdelay(256);
1283 SETPORT(SCSISEQ, 0);
1284 mdelay(DELAY);
1286 DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
1288 setup_expected_interrupts(shpnt);
1289 if(HOSTDATA(shpnt)->commands==0)
1290 SETPORT(PORTA, 0);
1292 DO_UNLOCK(flags);
1294 return SUCCESS;
1299 * Restore default values to the AIC-6260 registers and reset the fifos
1302 static void reset_ports(struct Scsi_Host *shpnt)
1304 unsigned long flags;
1306 /* disable interrupts */
1307 SETPORT(DMACNTRL0, RSTFIFO);
1309 SETPORT(SCSISEQ, 0);
1311 SETPORT(SXFRCTL1, 0);
1312 SETPORT(SCSISIG, 0);
1313 SETRATE(0);
1315 /* clear all interrupt conditions */
1316 SETPORT(SSTAT0, 0x7f);
1317 SETPORT(SSTAT1, 0xef);
1319 SETPORT(SSTAT4, SYNCERR | FWERR | FRERR);
1321 SETPORT(DMACNTRL0, 0);
1322 SETPORT(DMACNTRL1, 0);
1324 SETPORT(BRSTCNTRL, 0xf1);
1326 /* clear SCSI fifos and transfer count */
1327 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1328 SETPORT(SXFRCTL0, CH1);
1330 DO_LOCK(flags);
1331 setup_expected_interrupts(shpnt);
1332 DO_UNLOCK(flags);
1336 * Reset the host (bus and controller)
1339 int aha152x_host_reset(Scsi_Cmnd * SCpnt)
1341 #if defined(AHA152X_DEBUG)
1342 struct Scsi_Host *shpnt = SCpnt->device->host;
1343 #endif
1345 DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
1347 aha152x_bus_reset(SCpnt);
1349 DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
1350 reset_ports(SCpnt->device->host);
1352 return SUCCESS;
1356 * Return the "logical geometry"
1359 static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1360 sector_t capacity, int *info_array)
1362 struct Scsi_Host *shpnt = sdev->host;
1364 /* try default translation */
1365 info_array[0] = 64;
1366 info_array[1] = 32;
1367 info_array[2] = (unsigned long)capacity / (64 * 32);
1369 /* for disks >1GB do some guessing */
1370 if (info_array[2] >= 1024) {
1371 int info[3];
1373 /* try to figure out the geometry from the partition table */
1374 if (scsicam_bios_param(bdev, capacity, info) < 0 ||
1375 !((info[0] == 64 && info[1] == 32) || (info[0] == 255 && info[1] == 63))) {
1376 if (EXT_TRANS) {
1377 printk(KERN_NOTICE
1378 "aha152x: unable to verify geometry for disk with >1GB.\n"
1379 " using extended translation.\n");
1380 info_array[0] = 255;
1381 info_array[1] = 63;
1382 info_array[2] = (unsigned long)capacity / (255 * 63);
1383 } else {
1384 printk(KERN_NOTICE
1385 "aha152x: unable to verify geometry for disk with >1GB.\n"
1386 " Using default translation. Please verify yourself.\n"
1387 " Perhaps you need to enable extended translation in the driver.\n"
1388 " See Documentation/scsi/aha152x.txt for details.\n");
1390 } else {
1391 info_array[0] = info[0];
1392 info_array[1] = info[1];
1393 info_array[2] = info[2];
1395 if (info[0] == 255 && !EXT_TRANS) {
1396 printk(KERN_NOTICE
1397 "aha152x: current partition table is using extended translation.\n"
1398 " using it also, although it's not explicitly enabled.\n");
1403 return 0;
1407 * Internal done function
1410 static void done(struct Scsi_Host *shpnt, int error)
1412 if (CURRENT_SC) {
1413 if(DONE_SC)
1414 printk(ERR_LEAD "there's already a completed command %p - will cause abort\n", CMDINFO(CURRENT_SC), DONE_SC);
1416 DONE_SC = CURRENT_SC;
1417 CURRENT_SC = NULL;
1418 DONE_SC->result = error;
1419 } else
1420 printk(KERN_ERR "aha152x: done() called outside of command\n");
1423 static struct work_struct aha152x_tq;
1426 * Run service completions on the card with interrupts enabled.
1429 static void run(void)
1431 int i;
1432 for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
1433 struct Scsi_Host *shpnt = aha152x_host[i];
1434 if (shpnt && HOSTDATA(shpnt)->service) {
1435 HOSTDATA(shpnt)->service=0;
1436 is_complete(shpnt);
1442 * Interrupts handler
1446 static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
1448 struct Scsi_Host *shpnt = lookup_irq(irqno);
1449 unsigned char rev, dmacntrl0;
1451 if (!shpnt) {
1452 printk(KERN_ERR "aha152x: catched interrupt %d for unknown controller.\n", irqno);
1453 return IRQ_NONE;
1457 * Read a couple of registers that are known to not be all 1's. If
1458 * we read all 1's (-1), that means that either:
1460 * a. The host adapter chip has gone bad, and we cannot control it,
1461 * OR
1462 * b. The host adapter is a PCMCIA card that has been ejected
1464 * In either case, we cannot do anything with the host adapter at
1465 * this point in time. So just ignore the interrupt and return.
1466 * In the latter case, the interrupt might actually be meant for
1467 * someone else sharing this IRQ, and that driver will handle it.
1469 rev = GETPORT(REV);
1470 dmacntrl0 = GETPORT(DMACNTRL0);
1471 if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
1472 return IRQ_NONE;
1474 /* no more interrupts from the controller, while we're busy.
1475 INTEN is restored by the BH handler */
1476 CLRBITS(DMACNTRL0, INTEN);
1478 #if 0
1479 /* check if there is already something to be
1480 serviced; should not happen */
1481 if(HOSTDATA(shpnt)->service) {
1482 printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
1483 show_queues(shpnt);
1485 #endif
1487 /* Poke the BH handler */
1488 HOSTDATA(shpnt)->service++;
1489 INIT_WORK(&aha152x_tq, (void *) run, NULL);
1490 schedule_work(&aha152x_tq);
1491 return IRQ_HANDLED;
1495 * busfree phase
1496 * - handle completition/disconnection/error of current command
1497 * - start selection for next command (if any)
1499 static void busfree_run(struct Scsi_Host *shpnt)
1501 unsigned long flags;
1502 #if defined(AHA152X_STAT)
1503 int action=0;
1504 #endif
1506 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1507 SETPORT(SXFRCTL0, CH1);
1509 SETPORT(SSTAT1, CLRBUSFREE);
1511 if(CURRENT_SC) {
1512 #if defined(AHA152X_STAT)
1513 action++;
1514 #endif
1515 CURRENT_SC->SCp.phase &= ~syncneg;
1517 if(CURRENT_SC->SCp.phase & completed) {
1518 /* target sent COMMAND COMPLETE */
1519 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16));
1521 } else if(CURRENT_SC->SCp.phase & aborted) {
1522 DPRINTK(debug_eh, DEBUG_LEAD "ABORT sent\n", CMDINFO(CURRENT_SC));
1523 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_ABORT << 16));
1525 } else if(CURRENT_SC->SCp.phase & resetted) {
1526 DPRINTK(debug_eh, DEBUG_LEAD "BUS DEVICE RESET sent\n", CMDINFO(CURRENT_SC));
1527 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_RESET << 16));
1529 } else if(CURRENT_SC->SCp.phase & disconnected) {
1530 /* target sent DISCONNECT */
1531 DPRINTK(debug_selection, DEBUG_LEAD "target disconnected at %d/%d\n",
1532 CMDINFO(CURRENT_SC),
1533 CURRENT_SC->resid,
1534 CURRENT_SC->request_bufflen);
1535 #if defined(AHA152X_STAT)
1536 HOSTDATA(shpnt)->disconnections++;
1537 #endif
1538 append_SC(&DISCONNECTED_SC, CURRENT_SC);
1539 CURRENT_SC->SCp.phase |= 1 << 16;
1540 CURRENT_SC = NULL;
1542 } else {
1543 done(shpnt, DID_ERROR << 16);
1545 #if defined(AHA152X_STAT)
1546 } else {
1547 HOSTDATA(shpnt)->busfree_without_old_command++;
1548 #endif
1551 DO_LOCK(flags);
1553 if(DONE_SC) {
1554 #if defined(AHA152X_STAT)
1555 action++;
1556 #endif
1558 if(DONE_SC->SCp.phase & check_condition) {
1559 #if 0
1560 if(HOSTDATA(shpnt)->debug & debug_eh) {
1561 printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
1562 scsi_print_sense("bh", DONE_SC);
1564 #endif
1566 /* restore old command */
1567 memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd));
1568 DONE_SC->request_buffer = DONE_SC->buffer;
1569 DONE_SC->request_bufflen = DONE_SC->bufflen;
1570 DONE_SC->use_sg = DONE_SC->old_use_sg;
1571 DONE_SC->cmd_len = DONE_SC->old_cmd_len;
1573 DONE_SC->SCp.Status = 0x02;
1575 HOSTDATA(shpnt)->commands--;
1576 if (!HOSTDATA(shpnt)->commands)
1577 SETPORT(PORTA, 0); /* turn led off */
1578 } else if(DONE_SC->SCp.Status==0x02) {
1579 #if defined(AHA152X_STAT)
1580 HOSTDATA(shpnt)->busfree_with_check_condition++;
1581 #endif
1582 #if 0
1583 DPRINTK(debug_eh, ERR_LEAD "CHECK CONDITION found\n", CMDINFO(DONE_SC));
1584 #endif
1586 if(!(DONE_SC->SCp.Status & not_issued)) {
1587 Scsi_Cmnd *ptr = DONE_SC;
1588 DONE_SC=NULL;
1589 #if 0
1590 DPRINTK(debug_eh, ERR_LEAD "requesting sense\n", CMDINFO(ptr));
1591 #endif
1593 ptr->cmnd[0] = REQUEST_SENSE;
1594 ptr->cmnd[1] = 0;
1595 ptr->cmnd[2] = 0;
1596 ptr->cmnd[3] = 0;
1597 ptr->cmnd[4] = sizeof(ptr->sense_buffer);
1598 ptr->cmnd[5] = 0;
1599 ptr->cmd_len = 6;
1600 ptr->use_sg = 0;
1601 ptr->request_buffer = ptr->sense_buffer;
1602 ptr->request_bufflen = sizeof(ptr->sense_buffer);
1604 DO_UNLOCK(flags);
1605 aha152x_internal_queue(ptr, NULL, check_condition, ptr->scsi_done);
1606 DO_LOCK(flags);
1607 #if 0
1608 } else {
1609 DPRINTK(debug_eh, ERR_LEAD "command not issued - CHECK CONDITION ignored\n", CMDINFO(DONE_SC));
1610 #endif
1614 if(DONE_SC && DONE_SC->scsi_done) {
1615 #if defined(AHA152X_DEBUG)
1616 int hostno=DONE_SC->device->host->host_no;
1617 int id=DONE_SC->device->id & 0xf;
1618 int lun=DONE_SC->device->lun & 0x7;
1619 #endif
1620 Scsi_Cmnd *ptr = DONE_SC;
1621 DONE_SC=NULL;
1623 /* turn led off, when no commands are in the driver */
1624 HOSTDATA(shpnt)->commands--;
1625 if (!HOSTDATA(shpnt)->commands)
1626 SETPORT(PORTA, 0); /* turn led off */
1628 if(ptr->scsi_done != reset_done) {
1629 kfree(ptr->host_scribble);
1630 ptr->host_scribble=NULL;
1633 DO_UNLOCK(flags);
1634 DPRINTK(debug_done, DEBUG_LEAD "calling scsi_done(%p)\n", hostno, id, lun, ptr);
1635 ptr->scsi_done(ptr);
1636 DPRINTK(debug_done, DEBUG_LEAD "scsi_done(%p) returned\n", hostno, id, lun, ptr);
1637 DO_LOCK(flags);
1640 DONE_SC=NULL;
1641 #if defined(AHA152X_STAT)
1642 } else {
1643 HOSTDATA(shpnt)->busfree_without_done_command++;
1644 #endif
1647 if(ISSUE_SC)
1648 CURRENT_SC = remove_first_SC(&ISSUE_SC);
1650 DO_UNLOCK(flags);
1652 if(CURRENT_SC) {
1653 #if defined(AHA152X_STAT)
1654 action++;
1655 #endif
1656 CURRENT_SC->SCp.phase |= selecting;
1658 DPRINTK(debug_selection, DEBUG_LEAD "selecting target\n", CMDINFO(CURRENT_SC));
1660 /* clear selection timeout */
1661 SETPORT(SSTAT1, SELTO);
1663 SETPORT(SCSIID, (shpnt->this_id << OID_) | CURRENT_SC->device->id);
1664 SETPORT(SXFRCTL1, (PARITY ? ENSPCHK : 0 ) | ENSTIMER);
1665 SETPORT(SCSISEQ, ENSELO | ENAUTOATNO | (DISCONNECTED_SC ? ENRESELI : 0));
1666 } else {
1667 #if defined(AHA152X_STAT)
1668 HOSTDATA(shpnt)->busfree_without_new_command++;
1669 #endif
1670 SETPORT(SCSISEQ, DISCONNECTED_SC ? ENRESELI : 0);
1673 #if defined(AHA152X_STAT)
1674 if(!action)
1675 HOSTDATA(shpnt)->busfree_without_any_action++;
1676 #endif
1680 * Selection done (OUT)
1681 * - queue IDENTIFY message and SDTR to selected target for message out
1682 * (ATN asserted automagically via ENAUTOATNO in busfree())
1684 static void seldo_run(struct Scsi_Host *shpnt)
1686 SETPORT(SCSISIG, 0);
1687 SETPORT(SSTAT1, CLRBUSFREE);
1688 SETPORT(SSTAT1, CLRPHASECHG);
1690 CURRENT_SC->SCp.phase &= ~(selecting|not_issued);
1692 SETPORT(SCSISEQ, 0);
1694 if (TESTLO(SSTAT0, SELDO)) {
1695 printk(ERR_LEAD "aha152x: passing bus free condition\n", CMDINFO(CURRENT_SC));
1696 done(shpnt, DID_NO_CONNECT << 16);
1697 return;
1700 SETPORT(SSTAT0, CLRSELDO);
1702 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
1704 if (CURRENT_SC->SCp.phase & aborting) {
1705 ADDMSGO(ABORT);
1706 } else if (CURRENT_SC->SCp.phase & resetting) {
1707 ADDMSGO(BUS_DEVICE_RESET);
1708 } else if (SYNCNEG==0 && SYNCHRONOUS) {
1709 CURRENT_SC->SCp.phase |= syncneg;
1710 ADDMSGO(EXTENDED_MESSAGE);
1711 ADDMSGO(3);
1712 ADDMSGO(EXTENDED_SDTR);
1713 ADDMSGO(50); /* 200ns */
1714 ADDMSGO(8); /* 8 byte req/ack offset */
1716 SYNCNEG=1; /* negotiation in progress */
1719 SETRATE(SYNCRATE);
1723 * Selection timeout
1724 * - return command to mid-level with failure cause
1727 static void selto_run(struct Scsi_Host *shpnt)
1729 SETPORT(SCSISEQ, 0);
1730 SETPORT(SSTAT1, CLRSELTIMO);
1732 DPRINTK(debug_selection, DEBUG_LEAD "selection timeout\n", CMDINFO(CURRENT_SC));
1734 if(!CURRENT_SC) {
1735 DPRINTK(debug_selection, DEBUG_LEAD "!CURRENT_SC\n", CMDINFO(CURRENT_SC));
1736 return;
1739 CURRENT_SC->SCp.phase &= ~selecting;
1741 if (CURRENT_SC->SCp.phase & aborted) {
1742 DPRINTK(debug_selection, DEBUG_LEAD "aborted\n", CMDINFO(CURRENT_SC));
1743 done(shpnt, DID_ABORT << 16);
1744 } else if (TESTLO(SSTAT0, SELINGO)) {
1745 DPRINTK(debug_selection, DEBUG_LEAD "arbitration not won\n", CMDINFO(CURRENT_SC));
1746 done(shpnt, DID_BUS_BUSY << 16);
1747 } else {
1748 /* ARBITRATION won, but SELECTION failed */
1749 DPRINTK(debug_selection, DEBUG_LEAD "selection failed\n", CMDINFO(CURRENT_SC));
1750 done(shpnt, DID_NO_CONNECT << 16);
1755 * Selection in done
1756 * - put current command back to issue queue
1757 * (reconnection of a disconnected nexus instead
1758 * of successful selection out)
1761 static void seldi_run(struct Scsi_Host *shpnt)
1763 int selid;
1764 int target;
1765 unsigned long flags;
1767 SETPORT(SCSISIG, 0);
1768 SETPORT(SSTAT0, CLRSELDI);
1769 SETPORT(SSTAT1, CLRBUSFREE);
1770 SETPORT(SSTAT1, CLRPHASECHG);
1772 if(CURRENT_SC) {
1773 if(!(CURRENT_SC->SCp.phase & not_issued))
1774 printk(ERR_LEAD "command should not have been issued yet\n", CMDINFO(CURRENT_SC));
1776 DPRINTK(debug_selection, ERR_LEAD "command requeued - reselection\n", CMDINFO(CURRENT_SC));
1778 DO_LOCK(flags);
1779 append_SC(&ISSUE_SC, CURRENT_SC);
1780 DO_UNLOCK(flags);
1782 CURRENT_SC = NULL;
1785 if(!DISCONNECTED_SC) {
1786 DPRINTK(debug_selection, DEBUG_LEAD "unexpected SELDI ", CMDINFO(CURRENT_SC));
1787 return;
1790 RECONN_TARGET=-1;
1792 selid = GETPORT(SELID) & ~(1 << shpnt->this_id);
1794 if (selid==0) {
1795 printk("aha152x%d: target id unknown (%02x)\n", HOSTNO, selid);
1796 return;
1799 for(target=7; !(selid & (1 << target)); target--)
1802 if(selid & ~(1 << target)) {
1803 printk("aha152x%d: multiple targets reconnected (%02x)\n",
1804 HOSTNO, selid);
1808 SETPORT(SCSIID, (shpnt->this_id << OID_) | target);
1809 SETPORT(SCSISEQ, 0);
1811 SETRATE(HOSTDATA(shpnt)->syncrate[target]);
1813 RECONN_TARGET=target;
1814 DPRINTK(debug_selection, DEBUG_LEAD "target %d reselected (%02x).\n", CMDINFO(CURRENT_SC), target, selid);
1818 * message in phase
1819 * - handle initial message after reconnection to identify
1820 * reconnecting nexus
1821 * - queue command on DISCONNECTED_SC on DISCONNECT message
1822 * - set completed flag on COMMAND COMPLETE
1823 * (other completition code moved to busfree_run)
1824 * - handle response to SDTR
1825 * - clear synchronous transfer agreements on BUS RESET
1827 * FIXME: what about SAVE POINTERS, RESTORE POINTERS?
1830 static void msgi_run(struct Scsi_Host *shpnt)
1832 for(;;) {
1833 int sstat1 = GETPORT(SSTAT1);
1835 if(sstat1 & (PHASECHG|PHASEMIS|BUSFREE) || !(sstat1 & REQINIT))
1836 return;
1838 if(TESTLO(SSTAT0,SPIORDY)) {
1839 DPRINTK(debug_msgi, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
1840 return;
1843 ADDMSGI(GETPORT(SCSIDAT));
1845 #if defined(AHA152X_DEBUG)
1846 if (HOSTDATA(shpnt)->debug & debug_msgi) {
1847 printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
1848 scsi_print_msg(&MSGI(0));
1849 printk("\n");
1851 #endif
1853 if(!CURRENT_SC) {
1854 if(LASTSTATE!=seldi) {
1855 printk(KERN_ERR "aha152x%d: message in w/o current command not after reselection\n", HOSTNO);
1859 * Handle reselection
1861 if(!(MSGI(0) & IDENTIFY_BASE)) {
1862 printk(KERN_ERR "aha152x%d: target didn't identify after reselection\n", HOSTNO);
1863 continue;
1866 CURRENT_SC = remove_lun_SC(&DISCONNECTED_SC, RECONN_TARGET, MSGI(0) & 0x3f);
1868 if (!CURRENT_SC) {
1869 show_queues(shpnt);
1870 printk(KERN_ERR "aha152x%d: no disconnected command for target %d/%d\n", HOSTNO, RECONN_TARGET, MSGI(0) & 0x3f);
1871 continue;
1874 DPRINTK(debug_msgi, DEBUG_LEAD "target reconnected\n", CMDINFO(CURRENT_SC));
1876 CURRENT_SC->SCp.Message = MSGI(0);
1877 CURRENT_SC->SCp.phase &= ~disconnected;
1879 MSGILEN=0;
1881 /* next message if any */
1882 continue;
1885 CURRENT_SC->SCp.Message = MSGI(0);
1887 switch (MSGI(0)) {
1888 case DISCONNECT:
1889 if (!RECONNECT)
1890 printk(WARN_LEAD "target was not allowed to disconnect\n", CMDINFO(CURRENT_SC));
1892 CURRENT_SC->SCp.phase |= disconnected;
1893 break;
1895 case COMMAND_COMPLETE:
1896 if(CURRENT_SC->SCp.phase & completed)
1897 DPRINTK(debug_msgi, DEBUG_LEAD "again COMMAND COMPLETE\n", CMDINFO(CURRENT_SC));
1899 CURRENT_SC->SCp.phase |= completed;
1900 break;
1902 case MESSAGE_REJECT:
1903 if (SYNCNEG==1) {
1904 printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
1905 SYNCNEG=2; /* negotiation completed */
1906 } else
1907 printk(INFO_LEAD "inbound message (MESSAGE REJECT)\n", CMDINFO(CURRENT_SC));
1908 break;
1910 case SAVE_POINTERS:
1911 break;
1913 case RESTORE_POINTERS:
1914 break;
1916 case EXTENDED_MESSAGE:
1917 if(MSGILEN<2 || MSGILEN<MSGI(1)+2) {
1918 /* not yet completed */
1919 continue;
1922 switch (MSGI(2)) {
1923 case EXTENDED_SDTR:
1925 long ticks;
1927 if (MSGI(1) != 3) {
1928 printk(ERR_LEAD "SDTR message length!=3\n", CMDINFO(CURRENT_SC));
1929 break;
1932 if (!HOSTDATA(shpnt)->synchronous)
1933 break;
1935 printk(INFO_LEAD, CMDINFO(CURRENT_SC));
1936 scsi_print_msg(&MSGI(0));
1937 printk("\n");
1939 ticks = (MSGI(3) * 4 + 49) / 50;
1941 if (syncneg) {
1942 /* negotiation in progress */
1943 if (ticks > 9 || MSGI(4) < 1 || MSGI(4) > 8) {
1944 ADDMSGO(MESSAGE_REJECT);
1945 printk(INFO_LEAD "received Synchronous Data Transfer Request invalid - rejected\n", CMDINFO(CURRENT_SC));
1946 break;
1949 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1950 } else if (ticks <= 9 && MSGI(4) >= 1) {
1951 ADDMSGO(EXTENDED_MESSAGE);
1952 ADDMSGO(3);
1953 ADDMSGO(EXTENDED_SDTR);
1954 if (ticks < 4) {
1955 ticks = 4;
1956 ADDMSGO(50);
1957 } else
1958 ADDMSGO(MSGI(3));
1960 if (MSGI(4) > 8)
1961 MSGI(4) = 8;
1963 ADDMSGO(MSGI(4));
1965 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1966 } else {
1967 /* requested SDTR is too slow, do it asynchronously */
1968 printk(INFO_LEAD "Synchronous Data Transfer Request too slow - Rejecting\n", CMDINFO(CURRENT_SC));
1969 ADDMSGO(MESSAGE_REJECT);
1972 SYNCNEG=2; /* negotiation completed */
1973 SETRATE(SYNCRATE);
1975 break;
1977 case BUS_DEVICE_RESET:
1979 int i;
1981 for(i=0; i<8; i++) {
1982 HOSTDATA(shpnt)->syncrate[i]=0;
1983 HOSTDATA(shpnt)->syncneg[i]=0;
1987 break;
1989 case EXTENDED_MODIFY_DATA_POINTER:
1990 case EXTENDED_EXTENDED_IDENTIFY:
1991 case EXTENDED_WDTR:
1992 default:
1993 ADDMSGO(MESSAGE_REJECT);
1994 break;
1996 break;
1999 MSGILEN=0;
2003 static void msgi_end(struct Scsi_Host *shpnt)
2005 if(MSGILEN>0)
2006 printk(WARN_LEAD "target left before message completed (%d)\n", CMDINFO(CURRENT_SC), MSGILEN);
2008 if (MSGOLEN > 0 && !(GETPORT(SSTAT1) & BUSFREE)) {
2009 DPRINTK(debug_msgi, DEBUG_LEAD "msgo pending\n", CMDINFO(CURRENT_SC));
2010 SETPORT(SCSISIG, P_MSGI | SIG_ATNO);
2015 * message out phase
2018 static void msgo_init(struct Scsi_Host *shpnt)
2020 if(MSGOLEN==0) {
2021 if((CURRENT_SC->SCp.phase & syncneg) && SYNCNEG==2 && SYNCRATE==0) {
2022 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
2023 } else {
2024 printk(INFO_LEAD "unexpected MESSAGE OUT phase; rejecting\n", CMDINFO(CURRENT_SC));
2025 ADDMSGO(MESSAGE_REJECT);
2029 #if defined(AHA152X_DEBUG)
2030 if(HOSTDATA(shpnt)->debug & debug_msgo) {
2031 int i;
2033 printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
2034 for (i=0; i<MSGOLEN; i+=scsi_print_msg(&MSGO(i)), printk(" "))
2036 printk(")\n");
2038 #endif
2042 * message out phase
2045 static void msgo_run(struct Scsi_Host *shpnt)
2047 if(MSGO_I==MSGOLEN)
2048 DPRINTK(debug_msgo, DEBUG_LEAD "messages all sent (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
2050 while(MSGO_I<MSGOLEN) {
2051 DPRINTK(debug_msgo, DEBUG_LEAD "message byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO(MSGO_I), MSGO_I, MSGOLEN);
2053 if(TESTLO(SSTAT0, SPIORDY)) {
2054 DPRINTK(debug_msgo, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2055 return;
2058 if (MSGO_I==MSGOLEN-1) {
2059 /* Leave MESSAGE OUT after transfer */
2060 SETPORT(SSTAT1, CLRATNO);
2064 if (MSGO(MSGO_I) & IDENTIFY_BASE)
2065 CURRENT_SC->SCp.phase |= identified;
2067 if (MSGO(MSGO_I)==ABORT)
2068 CURRENT_SC->SCp.phase |= aborted;
2070 if (MSGO(MSGO_I)==BUS_DEVICE_RESET)
2071 CURRENT_SC->SCp.phase |= resetted;
2073 SETPORT(SCSIDAT, MSGO(MSGO_I++));
2077 static void msgo_end(struct Scsi_Host *shpnt)
2079 if(MSGO_I<MSGOLEN) {
2080 printk(ERR_LEAD "message sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
2081 if(SYNCNEG==1) {
2082 printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
2083 SYNCNEG=2;
2087 MSGO_I = 0;
2088 MSGOLEN = 0;
2092 * command phase
2095 static void cmd_init(struct Scsi_Host *shpnt)
2097 if (CURRENT_SC->SCp.sent_command) {
2098 printk(ERR_LEAD "command already sent\n", CMDINFO(CURRENT_SC));
2099 done(shpnt, DID_ERROR << 16);
2100 return;
2103 #if defined(AHA152X_DEBUG)
2104 if (HOSTDATA(shpnt)->debug & debug_cmd) {
2105 printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC));
2106 __scsi_print_command(CURRENT_SC->cmnd);
2108 #endif
2110 CMD_I=0;
2114 * command phase
2117 static void cmd_run(struct Scsi_Host *shpnt)
2119 if(CMD_I==CURRENT_SC->cmd_len) {
2120 DPRINTK(debug_cmd, DEBUG_LEAD "command already completely sent (%d/%d)", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
2121 disp_ports(shpnt);
2124 while(CMD_I<CURRENT_SC->cmd_len) {
2125 DPRINTK(debug_cmd, DEBUG_LEAD "command byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), CURRENT_SC->cmnd[CMD_I], CMD_I, CURRENT_SC->cmd_len);
2127 if(TESTLO(SSTAT0, SPIORDY)) {
2128 DPRINTK(debug_cmd, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2129 return;
2132 SETPORT(SCSIDAT, CURRENT_SC->cmnd[CMD_I++]);
2136 static void cmd_end(struct Scsi_Host *shpnt)
2138 if(CMD_I<CURRENT_SC->cmd_len)
2139 printk(ERR_LEAD "command sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
2140 else
2141 CURRENT_SC->SCp.sent_command++;
2145 * status phase
2148 static void status_run(struct Scsi_Host *shpnt)
2150 if(TESTLO(SSTAT0,SPIORDY)) {
2151 DPRINTK(debug_status, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2152 return;
2155 CURRENT_SC->SCp.Status = GETPORT(SCSIDAT);
2157 #if defined(AHA152X_DEBUG)
2158 if (HOSTDATA(shpnt)->debug & debug_status) {
2159 printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status);
2160 scsi_print_status(CURRENT_SC->SCp.Status);
2161 printk("\n");
2163 #endif
2167 * data in phase
2170 static void datai_init(struct Scsi_Host *shpnt)
2172 SETPORT(DMACNTRL0, RSTFIFO);
2173 SETPORT(DMACNTRL0, RSTFIFO|ENDMA);
2175 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2176 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
2178 SETPORT(SIMODE0, 0);
2179 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE);
2181 DATA_LEN=0;
2182 DPRINTK(debug_datai,
2183 DEBUG_LEAD "datai_init: request_bufflen=%d resid=%d\n",
2184 CMDINFO(CURRENT_SC), CURRENT_SC->request_bufflen, CURRENT_SC->resid);
2187 static void datai_run(struct Scsi_Host *shpnt)
2189 unsigned long the_time;
2190 int fifodata, data_count;
2193 * loop while the phase persists or the fifos are not empty
2196 while(TESTLO(DMASTAT, INTSTAT) || TESTLO(DMASTAT, DFIFOEMP) || TESTLO(SSTAT2, SEMPTY)) {
2197 /* FIXME: maybe this should be done by setting up
2198 * STCNT to trigger ENSWRAP interrupt, instead of
2199 * polling for DFIFOFULL
2201 the_time=jiffies + 100*HZ;
2202 while(TESTLO(DMASTAT, DFIFOFULL|INTSTAT) && time_before(jiffies,the_time))
2203 barrier();
2205 if(TESTLO(DMASTAT, DFIFOFULL|INTSTAT)) {
2206 printk(ERR_LEAD "datai timeout", CMDINFO(CURRENT_SC));
2207 disp_ports(shpnt);
2208 break;
2211 if(TESTHI(DMASTAT, DFIFOFULL)) {
2212 fifodata = 128;
2213 } else {
2214 the_time=jiffies + 100*HZ;
2215 while(TESTLO(SSTAT2, SEMPTY) && time_before(jiffies,the_time))
2216 barrier();
2218 if(TESTLO(SSTAT2, SEMPTY)) {
2219 printk(ERR_LEAD "datai sempty timeout", CMDINFO(CURRENT_SC));
2220 disp_ports(shpnt);
2221 break;
2224 fifodata = GETPORT(FIFOSTAT);
2227 if(CURRENT_SC->SCp.this_residual>0) {
2228 while(fifodata>0 && CURRENT_SC->SCp.this_residual>0) {
2229 data_count = fifodata>CURRENT_SC->SCp.this_residual ?
2230 CURRENT_SC->SCp.this_residual :
2231 fifodata;
2232 fifodata -= data_count;
2234 if(data_count & 1) {
2235 DPRINTK(debug_datai, DEBUG_LEAD "8bit\n", CMDINFO(CURRENT_SC));
2236 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2237 *CURRENT_SC->SCp.ptr++ = GETPORT(DATAPORT);
2238 CURRENT_SC->SCp.this_residual--;
2239 DATA_LEN++;
2240 SETPORT(DMACNTRL0, ENDMA);
2243 if(data_count > 1) {
2244 DPRINTK(debug_datai, DEBUG_LEAD "16bit(%d)\n", CMDINFO(CURRENT_SC), data_count);
2245 data_count >>= 1;
2246 insw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2247 CURRENT_SC->SCp.ptr += 2 * data_count;
2248 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2249 DATA_LEN += 2 * data_count;
2252 if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
2253 /* advance to next buffer */
2254 CURRENT_SC->SCp.buffers_residual--;
2255 CURRENT_SC->SCp.buffer++;
2256 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2257 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2260 } else if(fifodata>0) {
2261 printk(ERR_LEAD "no buffers left for %d(%d) bytes (data overrun!?)\n", CMDINFO(CURRENT_SC), fifodata, GETPORT(FIFOSTAT));
2262 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2263 while(fifodata>0) {
2264 int data;
2265 data=GETPORT(DATAPORT);
2266 DPRINTK(debug_datai, DEBUG_LEAD "data=%02x\n", CMDINFO(CURRENT_SC), data);
2267 fifodata--;
2268 DATA_LEN++;
2270 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2274 if(TESTLO(DMASTAT, INTSTAT) ||
2275 TESTLO(DMASTAT, DFIFOEMP) ||
2276 TESTLO(SSTAT2, SEMPTY) ||
2277 GETPORT(FIFOSTAT)>0) {
2279 * something went wrong, if there's something left in the fifos
2280 * or the phase didn't change
2282 printk(ERR_LEAD "fifos should be empty and phase should have changed\n", CMDINFO(CURRENT_SC));
2283 disp_ports(shpnt);
2286 if(DATA_LEN!=GETSTCNT()) {
2287 printk(ERR_LEAD
2288 "manual transfer count differs from automatic (count=%d;stcnt=%d;diff=%d;fifostat=%d)",
2289 CMDINFO(CURRENT_SC), DATA_LEN, GETSTCNT(), GETSTCNT()-DATA_LEN, GETPORT(FIFOSTAT));
2290 disp_ports(shpnt);
2291 mdelay(10000);
2295 static void datai_end(struct Scsi_Host *shpnt)
2297 CURRENT_SC->resid -= GETSTCNT();
2299 DPRINTK(debug_datai,
2300 DEBUG_LEAD "datai_end: request_bufflen=%d resid=%d stcnt=%d\n",
2301 CMDINFO(CURRENT_SC), CURRENT_SC->request_bufflen, CURRENT_SC->resid, GETSTCNT());
2303 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2304 SETPORT(DMACNTRL0, 0);
2308 * data out phase
2311 static void datao_init(struct Scsi_Host *shpnt)
2313 SETPORT(DMACNTRL0, WRITE_READ | RSTFIFO);
2314 SETPORT(DMACNTRL0, WRITE_READ | ENDMA);
2316 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2317 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
2319 SETPORT(SIMODE0, 0);
2320 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE );
2322 DATA_LEN = CURRENT_SC->resid;
2324 DPRINTK(debug_datao,
2325 DEBUG_LEAD "datao_init: request_bufflen=%d; resid=%d\n",
2326 CMDINFO(CURRENT_SC), CURRENT_SC->request_bufflen, CURRENT_SC->resid);
2329 static void datao_run(struct Scsi_Host *shpnt)
2331 unsigned long the_time;
2332 int data_count;
2334 /* until phase changes or all data sent */
2335 while(TESTLO(DMASTAT, INTSTAT) && CURRENT_SC->SCp.this_residual>0) {
2336 data_count = 128;
2337 if(data_count > CURRENT_SC->SCp.this_residual)
2338 data_count=CURRENT_SC->SCp.this_residual;
2340 if(TESTLO(DMASTAT, DFIFOEMP)) {
2341 printk(ERR_LEAD "datao fifo not empty (%d)", CMDINFO(CURRENT_SC), GETPORT(FIFOSTAT));
2342 disp_ports(shpnt);
2343 break;
2346 if(data_count & 1) {
2347 SETPORT(DMACNTRL0,WRITE_READ|ENDMA|_8BIT);
2348 SETPORT(DATAPORT, *CURRENT_SC->SCp.ptr++);
2349 CURRENT_SC->SCp.this_residual--;
2350 CURRENT_SC->resid--;
2351 SETPORT(DMACNTRL0,WRITE_READ|ENDMA);
2354 if(data_count > 1) {
2355 data_count >>= 1;
2356 outsw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2357 CURRENT_SC->SCp.ptr += 2 * data_count;
2358 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2359 CURRENT_SC->resid -= 2 * data_count;
2362 if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
2363 /* advance to next buffer */
2364 CURRENT_SC->SCp.buffers_residual--;
2365 CURRENT_SC->SCp.buffer++;
2366 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2367 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2370 the_time=jiffies + 100*HZ;
2371 while(TESTLO(DMASTAT, DFIFOEMP|INTSTAT) && time_before(jiffies,the_time))
2372 barrier();
2374 if(TESTLO(DMASTAT, DFIFOEMP|INTSTAT)) {
2375 printk(ERR_LEAD "dataout timeout", CMDINFO(CURRENT_SC));
2376 disp_ports(shpnt);
2377 break;
2382 static void datao_end(struct Scsi_Host *shpnt)
2384 if(TESTLO(DMASTAT, DFIFOEMP)) {
2385 int data_count = (DATA_LEN - CURRENT_SC->resid) - GETSTCNT();
2387 DPRINTK(debug_datao, DEBUG_LEAD "datao: %d bytes to resend (%d written, %d transferred)\n",
2388 CMDINFO(CURRENT_SC),
2389 data_count,
2390 DATA_LEN-CURRENT_SC->resid,
2391 GETSTCNT());
2393 CURRENT_SC->resid += data_count;
2395 if(CURRENT_SC->use_sg) {
2396 data_count -= CURRENT_SC->SCp.ptr - SG_ADDRESS(CURRENT_SC->SCp.buffer);
2397 while(data_count>0) {
2398 CURRENT_SC->SCp.buffer--;
2399 CURRENT_SC->SCp.buffers_residual++;
2400 data_count -= CURRENT_SC->SCp.buffer->length;
2402 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) - data_count;
2403 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length + data_count;
2404 } else {
2405 CURRENT_SC->SCp.ptr -= data_count;
2406 CURRENT_SC->SCp.this_residual += data_count;
2410 DPRINTK(debug_datao, DEBUG_LEAD "datao_end: request_bufflen=%d; resid=%d; stcnt=%d\n",
2411 CMDINFO(CURRENT_SC),
2412 CURRENT_SC->request_bufflen,
2413 CURRENT_SC->resid,
2414 GETSTCNT());
2416 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
2417 SETPORT(SXFRCTL0, CH1);
2419 SETPORT(DMACNTRL0, 0);
2423 * figure out what state we're in
2426 static int update_state(struct Scsi_Host *shpnt)
2428 int dataphase=0;
2429 unsigned int stat0 = GETPORT(SSTAT0);
2430 unsigned int stat1 = GETPORT(SSTAT1);
2432 PREVSTATE = STATE;
2433 STATE=unknown;
2435 if(stat1 & SCSIRSTI) {
2436 STATE=rsti;
2437 SETPORT(SCSISEQ,0);
2438 SETPORT(SSTAT1,SCSIRSTI);
2439 } else if(stat0 & SELDI && PREVSTATE==busfree) {
2440 STATE=seldi;
2441 } else if(stat0 & SELDO && CURRENT_SC && (CURRENT_SC->SCp.phase & selecting)) {
2442 STATE=seldo;
2443 } else if(stat1 & SELTO) {
2444 STATE=selto;
2445 } else if(stat1 & BUSFREE) {
2446 STATE=busfree;
2447 SETPORT(SSTAT1,BUSFREE);
2448 } else if(stat1 & SCSIPERR) {
2449 STATE=parerr;
2450 SETPORT(SSTAT1,SCSIPERR);
2451 } else if(stat1 & REQINIT) {
2452 switch(GETPORT(SCSISIG) & P_MASK) {
2453 case P_MSGI: STATE=msgi; break;
2454 case P_MSGO: STATE=msgo; break;
2455 case P_DATAO: STATE=datao; break;
2456 case P_DATAI: STATE=datai; break;
2457 case P_STATUS: STATE=status; break;
2458 case P_CMD: STATE=cmd; break;
2460 dataphase=1;
2463 if((stat0 & SELDI) && STATE!=seldi && !dataphase) {
2464 printk(INFO_LEAD "reselection missed?", CMDINFO(CURRENT_SC));
2465 disp_ports(shpnt);
2468 if(STATE!=PREVSTATE) {
2469 LASTSTATE=PREVSTATE;
2472 return dataphase;
2476 * handle parity error
2478 * FIXME: in which phase?
2481 static void parerr_run(struct Scsi_Host *shpnt)
2483 printk(ERR_LEAD "parity error\n", CMDINFO(CURRENT_SC));
2484 done(shpnt, DID_PARITY << 16);
2488 * handle reset in
2491 static void rsti_run(struct Scsi_Host *shpnt)
2493 Scsi_Cmnd *ptr;
2495 printk(KERN_NOTICE "aha152x%d: scsi reset in\n", HOSTNO);
2497 ptr=DISCONNECTED_SC;
2498 while(ptr) {
2499 Scsi_Cmnd *next = SCNEXT(ptr);
2501 if (!ptr->device->soft_reset) {
2502 remove_SC(&DISCONNECTED_SC, ptr);
2504 kfree(ptr->host_scribble);
2505 ptr->host_scribble=NULL;
2507 ptr->result = DID_RESET << 16;
2508 ptr->scsi_done(ptr);
2511 ptr = next;
2514 if(CURRENT_SC && !CURRENT_SC->device->soft_reset)
2515 done(shpnt, DID_RESET << 16 );
2520 * bottom-half handler
2523 static void is_complete(struct Scsi_Host *shpnt)
2525 int dataphase;
2526 unsigned long flags;
2527 int pending;
2529 DO_LOCK(flags);
2530 if(HOSTDATA(shpnt)->in_intr) {
2531 DO_UNLOCK(flags);
2532 /* aha152x_error never returns.. */
2533 aha152x_error(shpnt, "bottom-half already running!?");
2535 HOSTDATA(shpnt)->in_intr++;
2538 * loop while there are interrupt conditions pending
2541 do {
2542 unsigned long start = jiffies;
2543 DO_UNLOCK(flags);
2545 dataphase=update_state(shpnt);
2547 DPRINTK(debug_phases, LEAD "start %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
2550 * end previous state
2553 if(PREVSTATE!=STATE && states[PREVSTATE].end)
2554 states[PREVSTATE].end(shpnt);
2557 * disable SPIO mode if previous phase used it
2558 * and this one doesn't
2561 if(states[PREVSTATE].spio && !states[STATE].spio) {
2562 SETPORT(SXFRCTL0, CH1);
2563 SETPORT(DMACNTRL0, 0);
2564 if(CURRENT_SC)
2565 CURRENT_SC->SCp.phase &= ~spiordy;
2569 * accept current dataphase phase
2572 if(dataphase) {
2573 SETPORT(SSTAT0, REQINIT);
2574 SETPORT(SCSISIG, GETPORT(SCSISIG) & P_MASK);
2575 SETPORT(SSTAT1, PHASECHG);
2579 * enable SPIO mode if previous didn't use it
2580 * and this one does
2583 if(!states[PREVSTATE].spio && states[STATE].spio) {
2584 SETPORT(DMACNTRL0, 0);
2585 SETPORT(SXFRCTL0, CH1|SPIOEN);
2586 if(CURRENT_SC)
2587 CURRENT_SC->SCp.phase |= spiordy;
2591 * initialize for new state
2594 if(PREVSTATE!=STATE && states[STATE].init)
2595 states[STATE].init(shpnt);
2598 * handle current state
2601 if(states[STATE].run)
2602 states[STATE].run(shpnt);
2603 else
2604 printk(ERR_LEAD "unexpected state (%x)\n", CMDINFO(CURRENT_SC), STATE);
2607 * setup controller to interrupt on
2608 * the next expected condition and
2609 * loop if it's already there
2612 DO_LOCK(flags);
2613 pending=setup_expected_interrupts(shpnt);
2614 #if defined(AHA152X_STAT)
2615 HOSTDATA(shpnt)->count[STATE]++;
2616 if(PREVSTATE!=STATE)
2617 HOSTDATA(shpnt)->count_trans[STATE]++;
2618 HOSTDATA(shpnt)->time[STATE] += jiffies-start;
2619 #endif
2621 DPRINTK(debug_phases, LEAD "end %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
2622 } while(pending);
2625 * enable interrupts and leave bottom-half
2628 HOSTDATA(shpnt)->in_intr--;
2629 SETBITS(DMACNTRL0, INTEN);
2630 DO_UNLOCK(flags);
2635 * Dump the current driver status and panic
2637 static void aha152x_error(struct Scsi_Host *shpnt, char *msg)
2639 printk(KERN_EMERG "\naha152x%d: %s\n", HOSTNO, msg);
2640 show_queues(shpnt);
2641 panic("aha152x panic\n");
2645 * Display registers of AIC-6260
2647 static void disp_ports(struct Scsi_Host *shpnt)
2649 #if defined(AHA152X_DEBUG)
2650 int s;
2652 printk("\n%s: %s(%s) ",
2653 CURRENT_SC ? "busy" : "waiting",
2654 states[STATE].name,
2655 states[PREVSTATE].name);
2657 s = GETPORT(SCSISEQ);
2658 printk("SCSISEQ( ");
2659 if (s & TEMODEO)
2660 printk("TARGET MODE ");
2661 if (s & ENSELO)
2662 printk("SELO ");
2663 if (s & ENSELI)
2664 printk("SELI ");
2665 if (s & ENRESELI)
2666 printk("RESELI ");
2667 if (s & ENAUTOATNO)
2668 printk("AUTOATNO ");
2669 if (s & ENAUTOATNI)
2670 printk("AUTOATNI ");
2671 if (s & ENAUTOATNP)
2672 printk("AUTOATNP ");
2673 if (s & SCSIRSTO)
2674 printk("SCSIRSTO ");
2675 printk(");");
2677 printk(" SCSISIG(");
2678 s = GETPORT(SCSISIG);
2679 switch (s & P_MASK) {
2680 case P_DATAO:
2681 printk("DATA OUT");
2682 break;
2683 case P_DATAI:
2684 printk("DATA IN");
2685 break;
2686 case P_CMD:
2687 printk("COMMAND");
2688 break;
2689 case P_STATUS:
2690 printk("STATUS");
2691 break;
2692 case P_MSGO:
2693 printk("MESSAGE OUT");
2694 break;
2695 case P_MSGI:
2696 printk("MESSAGE IN");
2697 break;
2698 default:
2699 printk("*invalid*");
2700 break;
2703 printk("); ");
2705 printk("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
2707 printk("SSTAT( ");
2708 s = GETPORT(SSTAT0);
2709 if (s & TARGET)
2710 printk("TARGET ");
2711 if (s & SELDO)
2712 printk("SELDO ");
2713 if (s & SELDI)
2714 printk("SELDI ");
2715 if (s & SELINGO)
2716 printk("SELINGO ");
2717 if (s & SWRAP)
2718 printk("SWRAP ");
2719 if (s & SDONE)
2720 printk("SDONE ");
2721 if (s & SPIORDY)
2722 printk("SPIORDY ");
2723 if (s & DMADONE)
2724 printk("DMADONE ");
2726 s = GETPORT(SSTAT1);
2727 if (s & SELTO)
2728 printk("SELTO ");
2729 if (s & ATNTARG)
2730 printk("ATNTARG ");
2731 if (s & SCSIRSTI)
2732 printk("SCSIRSTI ");
2733 if (s & PHASEMIS)
2734 printk("PHASEMIS ");
2735 if (s & BUSFREE)
2736 printk("BUSFREE ");
2737 if (s & SCSIPERR)
2738 printk("SCSIPERR ");
2739 if (s & PHASECHG)
2740 printk("PHASECHG ");
2741 if (s & REQINIT)
2742 printk("REQINIT ");
2743 printk("); ");
2746 printk("SSTAT( ");
2748 s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
2750 if (s & TARGET)
2751 printk("TARGET ");
2752 if (s & SELDO)
2753 printk("SELDO ");
2754 if (s & SELDI)
2755 printk("SELDI ");
2756 if (s & SELINGO)
2757 printk("SELINGO ");
2758 if (s & SWRAP)
2759 printk("SWRAP ");
2760 if (s & SDONE)
2761 printk("SDONE ");
2762 if (s & SPIORDY)
2763 printk("SPIORDY ");
2764 if (s & DMADONE)
2765 printk("DMADONE ");
2767 s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
2769 if (s & SELTO)
2770 printk("SELTO ");
2771 if (s & ATNTARG)
2772 printk("ATNTARG ");
2773 if (s & SCSIRSTI)
2774 printk("SCSIRSTI ");
2775 if (s & PHASEMIS)
2776 printk("PHASEMIS ");
2777 if (s & BUSFREE)
2778 printk("BUSFREE ");
2779 if (s & SCSIPERR)
2780 printk("SCSIPERR ");
2781 if (s & PHASECHG)
2782 printk("PHASECHG ");
2783 if (s & REQINIT)
2784 printk("REQINIT ");
2785 printk("); ");
2787 printk("SXFRCTL0( ");
2789 s = GETPORT(SXFRCTL0);
2790 if (s & SCSIEN)
2791 printk("SCSIEN ");
2792 if (s & DMAEN)
2793 printk("DMAEN ");
2794 if (s & CH1)
2795 printk("CH1 ");
2796 if (s & CLRSTCNT)
2797 printk("CLRSTCNT ");
2798 if (s & SPIOEN)
2799 printk("SPIOEN ");
2800 if (s & CLRCH1)
2801 printk("CLRCH1 ");
2802 printk("); ");
2804 printk("SIGNAL( ");
2806 s = GETPORT(SCSISIG);
2807 if (s & SIG_ATNI)
2808 printk("ATNI ");
2809 if (s & SIG_SELI)
2810 printk("SELI ");
2811 if (s & SIG_BSYI)
2812 printk("BSYI ");
2813 if (s & SIG_REQI)
2814 printk("REQI ");
2815 if (s & SIG_ACKI)
2816 printk("ACKI ");
2817 printk("); ");
2819 printk("SELID (%02x), ", GETPORT(SELID));
2821 printk("STCNT (%d), ", GETSTCNT());
2823 printk("SSTAT2( ");
2825 s = GETPORT(SSTAT2);
2826 if (s & SOFFSET)
2827 printk("SOFFSET ");
2828 if (s & SEMPTY)
2829 printk("SEMPTY ");
2830 if (s & SFULL)
2831 printk("SFULL ");
2832 printk("); SFCNT (%d); ", s & (SFULL | SFCNT));
2834 s = GETPORT(SSTAT3);
2835 printk("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
2837 printk("SSTAT4( ");
2838 s = GETPORT(SSTAT4);
2839 if (s & SYNCERR)
2840 printk("SYNCERR ");
2841 if (s & FWERR)
2842 printk("FWERR ");
2843 if (s & FRERR)
2844 printk("FRERR ");
2845 printk("); ");
2847 printk("DMACNTRL0( ");
2848 s = GETPORT(DMACNTRL0);
2849 printk("%s ", s & _8BIT ? "8BIT" : "16BIT");
2850 printk("%s ", s & DMA ? "DMA" : "PIO");
2851 printk("%s ", s & WRITE_READ ? "WRITE" : "READ");
2852 if (s & ENDMA)
2853 printk("ENDMA ");
2854 if (s & INTEN)
2855 printk("INTEN ");
2856 if (s & RSTFIFO)
2857 printk("RSTFIFO ");
2858 if (s & SWINT)
2859 printk("SWINT ");
2860 printk("); ");
2862 printk("DMASTAT( ");
2863 s = GETPORT(DMASTAT);
2864 if (s & ATDONE)
2865 printk("ATDONE ");
2866 if (s & WORDRDY)
2867 printk("WORDRDY ");
2868 if (s & DFIFOFULL)
2869 printk("DFIFOFULL ");
2870 if (s & DFIFOEMP)
2871 printk("DFIFOEMP ");
2872 printk(")\n");
2873 #endif
2877 * display enabled interrupts
2879 static void disp_enintr(struct Scsi_Host *shpnt)
2881 int s;
2883 printk(KERN_DEBUG "enabled interrupts ( ");
2885 s = GETPORT(SIMODE0);
2886 if (s & ENSELDO)
2887 printk("ENSELDO ");
2888 if (s & ENSELDI)
2889 printk("ENSELDI ");
2890 if (s & ENSELINGO)
2891 printk("ENSELINGO ");
2892 if (s & ENSWRAP)
2893 printk("ENSWRAP ");
2894 if (s & ENSDONE)
2895 printk("ENSDONE ");
2896 if (s & ENSPIORDY)
2897 printk("ENSPIORDY ");
2898 if (s & ENDMADONE)
2899 printk("ENDMADONE ");
2901 s = GETPORT(SIMODE1);
2902 if (s & ENSELTIMO)
2903 printk("ENSELTIMO ");
2904 if (s & ENATNTARG)
2905 printk("ENATNTARG ");
2906 if (s & ENPHASEMIS)
2907 printk("ENPHASEMIS ");
2908 if (s & ENBUSFREE)
2909 printk("ENBUSFREE ");
2910 if (s & ENSCSIPERR)
2911 printk("ENSCSIPERR ");
2912 if (s & ENPHASECHG)
2913 printk("ENPHASECHG ");
2914 if (s & ENREQINIT)
2915 printk("ENREQINIT ");
2916 printk(")\n");
2920 * Show the command data of a command
2922 static void show_command(Scsi_Cmnd *ptr)
2924 scmd_printk(KERN_DEBUG, ptr, "%p: cmnd=(", ptr);
2926 __scsi_print_command(ptr->cmnd);
2928 printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |",
2929 ptr->request_bufflen, ptr->resid);
2931 if (ptr->SCp.phase & not_issued)
2932 printk("not issued|");
2933 if (ptr->SCp.phase & selecting)
2934 printk("selecting|");
2935 if (ptr->SCp.phase & identified)
2936 printk("identified|");
2937 if (ptr->SCp.phase & disconnected)
2938 printk("disconnected|");
2939 if (ptr->SCp.phase & completed)
2940 printk("completed|");
2941 if (ptr->SCp.phase & spiordy)
2942 printk("spiordy|");
2943 if (ptr->SCp.phase & syncneg)
2944 printk("syncneg|");
2945 if (ptr->SCp.phase & aborted)
2946 printk("aborted|");
2947 if (ptr->SCp.phase & resetted)
2948 printk("resetted|");
2949 if( SCDATA(ptr) ) {
2950 printk("; next=0x%p\n", SCNEXT(ptr));
2951 } else {
2952 printk("; next=(host scribble NULL)\n");
2957 * Dump the queued data
2959 static void show_queues(struct Scsi_Host *shpnt)
2961 Scsi_Cmnd *ptr;
2962 unsigned long flags;
2964 DO_LOCK(flags);
2965 printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n");
2966 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
2967 show_command(ptr);
2968 DO_UNLOCK(flags);
2970 printk(KERN_DEBUG "current_SC:\n");
2971 if (CURRENT_SC)
2972 show_command(CURRENT_SC);
2973 else
2974 printk(KERN_DEBUG "none\n");
2976 printk(KERN_DEBUG "disconnected_SC:\n");
2977 for (ptr = DISCONNECTED_SC; ptr; ptr = SCDATA(ptr) ? SCNEXT(ptr) : NULL)
2978 show_command(ptr);
2980 disp_ports(shpnt);
2981 disp_enintr(shpnt);
2984 #undef SPRINTF
2985 #define SPRINTF(args...) pos += sprintf(pos, ## args)
2987 static int get_command(char *pos, Scsi_Cmnd * ptr)
2989 char *start = pos;
2990 int i;
2992 SPRINTF("0x%08x: target=%d; lun=%d; cmnd=( ",
2993 (unsigned int) ptr, ptr->device->id, ptr->device->lun);
2995 for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
2996 SPRINTF("0x%02x ", ptr->cmnd[i]);
2998 SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
2999 ptr->resid, ptr->SCp.this_residual, ptr->SCp.buffers_residual);
3001 if (ptr->SCp.phase & not_issued)
3002 SPRINTF("not issued|");
3003 if (ptr->SCp.phase & selecting)
3004 SPRINTF("selecting|");
3005 if (ptr->SCp.phase & disconnected)
3006 SPRINTF("disconnected|");
3007 if (ptr->SCp.phase & aborted)
3008 SPRINTF("aborted|");
3009 if (ptr->SCp.phase & identified)
3010 SPRINTF("identified|");
3011 if (ptr->SCp.phase & completed)
3012 SPRINTF("completed|");
3013 if (ptr->SCp.phase & spiordy)
3014 SPRINTF("spiordy|");
3015 if (ptr->SCp.phase & syncneg)
3016 SPRINTF("syncneg|");
3017 SPRINTF("; next=0x%p\n", SCNEXT(ptr));
3019 return (pos - start);
3022 static int get_ports(struct Scsi_Host *shpnt, char *pos)
3024 char *start = pos;
3025 int s;
3027 SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
3029 s = GETPORT(SCSISEQ);
3030 SPRINTF("SCSISEQ( ");
3031 if (s & TEMODEO)
3032 SPRINTF("TARGET MODE ");
3033 if (s & ENSELO)
3034 SPRINTF("SELO ");
3035 if (s & ENSELI)
3036 SPRINTF("SELI ");
3037 if (s & ENRESELI)
3038 SPRINTF("RESELI ");
3039 if (s & ENAUTOATNO)
3040 SPRINTF("AUTOATNO ");
3041 if (s & ENAUTOATNI)
3042 SPRINTF("AUTOATNI ");
3043 if (s & ENAUTOATNP)
3044 SPRINTF("AUTOATNP ");
3045 if (s & SCSIRSTO)
3046 SPRINTF("SCSIRSTO ");
3047 SPRINTF(");");
3049 SPRINTF(" SCSISIG(");
3050 s = GETPORT(SCSISIG);
3051 switch (s & P_MASK) {
3052 case P_DATAO:
3053 SPRINTF("DATA OUT");
3054 break;
3055 case P_DATAI:
3056 SPRINTF("DATA IN");
3057 break;
3058 case P_CMD:
3059 SPRINTF("COMMAND");
3060 break;
3061 case P_STATUS:
3062 SPRINTF("STATUS");
3063 break;
3064 case P_MSGO:
3065 SPRINTF("MESSAGE OUT");
3066 break;
3067 case P_MSGI:
3068 SPRINTF("MESSAGE IN");
3069 break;
3070 default:
3071 SPRINTF("*invalid*");
3072 break;
3075 SPRINTF("); ");
3077 SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
3079 SPRINTF("SSTAT( ");
3080 s = GETPORT(SSTAT0);
3081 if (s & TARGET)
3082 SPRINTF("TARGET ");
3083 if (s & SELDO)
3084 SPRINTF("SELDO ");
3085 if (s & SELDI)
3086 SPRINTF("SELDI ");
3087 if (s & SELINGO)
3088 SPRINTF("SELINGO ");
3089 if (s & SWRAP)
3090 SPRINTF("SWRAP ");
3091 if (s & SDONE)
3092 SPRINTF("SDONE ");
3093 if (s & SPIORDY)
3094 SPRINTF("SPIORDY ");
3095 if (s & DMADONE)
3096 SPRINTF("DMADONE ");
3098 s = GETPORT(SSTAT1);
3099 if (s & SELTO)
3100 SPRINTF("SELTO ");
3101 if (s & ATNTARG)
3102 SPRINTF("ATNTARG ");
3103 if (s & SCSIRSTI)
3104 SPRINTF("SCSIRSTI ");
3105 if (s & PHASEMIS)
3106 SPRINTF("PHASEMIS ");
3107 if (s & BUSFREE)
3108 SPRINTF("BUSFREE ");
3109 if (s & SCSIPERR)
3110 SPRINTF("SCSIPERR ");
3111 if (s & PHASECHG)
3112 SPRINTF("PHASECHG ");
3113 if (s & REQINIT)
3114 SPRINTF("REQINIT ");
3115 SPRINTF("); ");
3118 SPRINTF("SSTAT( ");
3120 s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
3122 if (s & TARGET)
3123 SPRINTF("TARGET ");
3124 if (s & SELDO)
3125 SPRINTF("SELDO ");
3126 if (s & SELDI)
3127 SPRINTF("SELDI ");
3128 if (s & SELINGO)
3129 SPRINTF("SELINGO ");
3130 if (s & SWRAP)
3131 SPRINTF("SWRAP ");
3132 if (s & SDONE)
3133 SPRINTF("SDONE ");
3134 if (s & SPIORDY)
3135 SPRINTF("SPIORDY ");
3136 if (s & DMADONE)
3137 SPRINTF("DMADONE ");
3139 s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
3141 if (s & SELTO)
3142 SPRINTF("SELTO ");
3143 if (s & ATNTARG)
3144 SPRINTF("ATNTARG ");
3145 if (s & SCSIRSTI)
3146 SPRINTF("SCSIRSTI ");
3147 if (s & PHASEMIS)
3148 SPRINTF("PHASEMIS ");
3149 if (s & BUSFREE)
3150 SPRINTF("BUSFREE ");
3151 if (s & SCSIPERR)
3152 SPRINTF("SCSIPERR ");
3153 if (s & PHASECHG)
3154 SPRINTF("PHASECHG ");
3155 if (s & REQINIT)
3156 SPRINTF("REQINIT ");
3157 SPRINTF("); ");
3159 SPRINTF("SXFRCTL0( ");
3161 s = GETPORT(SXFRCTL0);
3162 if (s & SCSIEN)
3163 SPRINTF("SCSIEN ");
3164 if (s & DMAEN)
3165 SPRINTF("DMAEN ");
3166 if (s & CH1)
3167 SPRINTF("CH1 ");
3168 if (s & CLRSTCNT)
3169 SPRINTF("CLRSTCNT ");
3170 if (s & SPIOEN)
3171 SPRINTF("SPIOEN ");
3172 if (s & CLRCH1)
3173 SPRINTF("CLRCH1 ");
3174 SPRINTF("); ");
3176 SPRINTF("SIGNAL( ");
3178 s = GETPORT(SCSISIG);
3179 if (s & SIG_ATNI)
3180 SPRINTF("ATNI ");
3181 if (s & SIG_SELI)
3182 SPRINTF("SELI ");
3183 if (s & SIG_BSYI)
3184 SPRINTF("BSYI ");
3185 if (s & SIG_REQI)
3186 SPRINTF("REQI ");
3187 if (s & SIG_ACKI)
3188 SPRINTF("ACKI ");
3189 SPRINTF("); ");
3191 SPRINTF("SELID(%02x), ", GETPORT(SELID));
3193 SPRINTF("STCNT(%d), ", GETSTCNT());
3195 SPRINTF("SSTAT2( ");
3197 s = GETPORT(SSTAT2);
3198 if (s & SOFFSET)
3199 SPRINTF("SOFFSET ");
3200 if (s & SEMPTY)
3201 SPRINTF("SEMPTY ");
3202 if (s & SFULL)
3203 SPRINTF("SFULL ");
3204 SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
3206 s = GETPORT(SSTAT3);
3207 SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
3209 SPRINTF("SSTAT4( ");
3210 s = GETPORT(SSTAT4);
3211 if (s & SYNCERR)
3212 SPRINTF("SYNCERR ");
3213 if (s & FWERR)
3214 SPRINTF("FWERR ");
3215 if (s & FRERR)
3216 SPRINTF("FRERR ");
3217 SPRINTF("); ");
3219 SPRINTF("DMACNTRL0( ");
3220 s = GETPORT(DMACNTRL0);
3221 SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
3222 SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
3223 SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
3224 if (s & ENDMA)
3225 SPRINTF("ENDMA ");
3226 if (s & INTEN)
3227 SPRINTF("INTEN ");
3228 if (s & RSTFIFO)
3229 SPRINTF("RSTFIFO ");
3230 if (s & SWINT)
3231 SPRINTF("SWINT ");
3232 SPRINTF("); ");
3234 SPRINTF("DMASTAT( ");
3235 s = GETPORT(DMASTAT);
3236 if (s & ATDONE)
3237 SPRINTF("ATDONE ");
3238 if (s & WORDRDY)
3239 SPRINTF("WORDRDY ");
3240 if (s & DFIFOFULL)
3241 SPRINTF("DFIFOFULL ");
3242 if (s & DFIFOEMP)
3243 SPRINTF("DFIFOEMP ");
3244 SPRINTF(")\n");
3246 SPRINTF("enabled interrupts( ");
3248 s = GETPORT(SIMODE0);
3249 if (s & ENSELDO)
3250 SPRINTF("ENSELDO ");
3251 if (s & ENSELDI)
3252 SPRINTF("ENSELDI ");
3253 if (s & ENSELINGO)
3254 SPRINTF("ENSELINGO ");
3255 if (s & ENSWRAP)
3256 SPRINTF("ENSWRAP ");
3257 if (s & ENSDONE)
3258 SPRINTF("ENSDONE ");
3259 if (s & ENSPIORDY)
3260 SPRINTF("ENSPIORDY ");
3261 if (s & ENDMADONE)
3262 SPRINTF("ENDMADONE ");
3264 s = GETPORT(SIMODE1);
3265 if (s & ENSELTIMO)
3266 SPRINTF("ENSELTIMO ");
3267 if (s & ENATNTARG)
3268 SPRINTF("ENATNTARG ");
3269 if (s & ENPHASEMIS)
3270 SPRINTF("ENPHASEMIS ");
3271 if (s & ENBUSFREE)
3272 SPRINTF("ENBUSFREE ");
3273 if (s & ENSCSIPERR)
3274 SPRINTF("ENSCSIPERR ");
3275 if (s & ENPHASECHG)
3276 SPRINTF("ENPHASECHG ");
3277 if (s & ENREQINIT)
3278 SPRINTF("ENREQINIT ");
3279 SPRINTF(")\n");
3281 return (pos - start);
3284 static int aha152x_set_info(char *buffer, int length, struct Scsi_Host *shpnt)
3286 if(!shpnt || !buffer || length<8 || strncmp("aha152x ", buffer, 8)!=0)
3287 return -EINVAL;
3289 #if defined(AHA152X_DEBUG)
3290 if(length>14 && strncmp("debug ", buffer+8, 6)==0) {
3291 int debug = HOSTDATA(shpnt)->debug;
3293 HOSTDATA(shpnt)->debug = simple_strtoul(buffer+14, NULL, 0);
3295 printk(KERN_INFO "aha152x%d: debugging options set to 0x%04x (were 0x%04x)\n", HOSTNO, HOSTDATA(shpnt)->debug, debug);
3296 } else
3297 #endif
3298 #if defined(AHA152X_STAT)
3299 if(length>13 && strncmp("reset", buffer+8, 5)==0) {
3300 int i;
3302 HOSTDATA(shpnt)->total_commands=0;
3303 HOSTDATA(shpnt)->disconnections=0;
3304 HOSTDATA(shpnt)->busfree_without_any_action=0;
3305 HOSTDATA(shpnt)->busfree_without_old_command=0;
3306 HOSTDATA(shpnt)->busfree_without_new_command=0;
3307 HOSTDATA(shpnt)->busfree_without_done_command=0;
3308 HOSTDATA(shpnt)->busfree_with_check_condition=0;
3309 for (i = idle; i<maxstate; i++) {
3310 HOSTDATA(shpnt)->count[i]=0;
3311 HOSTDATA(shpnt)->count_trans[i]=0;
3312 HOSTDATA(shpnt)->time[i]=0;
3315 printk(KERN_INFO "aha152x%d: stats reseted.\n", HOSTNO);
3317 } else
3318 #endif
3320 return -EINVAL;
3324 return length;
3327 #undef SPRINTF
3328 #define SPRINTF(args...) \
3329 do { if(pos < buffer + length) pos += sprintf(pos, ## args); } while(0)
3331 static int aha152x_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start,
3332 off_t offset, int length, int inout)
3334 int i;
3335 char *pos = buffer;
3336 Scsi_Cmnd *ptr;
3337 unsigned long flags;
3338 int thislength;
3340 DPRINTK(debug_procinfo,
3341 KERN_DEBUG "aha152x_proc_info: buffer=%p offset=%ld length=%d hostno=%d inout=%d\n",
3342 buffer, offset, length, shpnt->host_no, inout);
3345 if (inout)
3346 return aha152x_set_info(buffer, length, shpnt);
3348 SPRINTF(AHA152X_REVID "\n");
3350 SPRINTF("ioports 0x%04lx to 0x%04lx\n",
3351 shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
3352 SPRINTF("interrupt 0x%02x\n", shpnt->irq);
3353 SPRINTF("disconnection/reconnection %s\n",
3354 RECONNECT ? "enabled" : "disabled");
3355 SPRINTF("parity checking %s\n",
3356 PARITY ? "enabled" : "disabled");
3357 SPRINTF("synchronous transfers %s\n",
3358 SYNCHRONOUS ? "enabled" : "disabled");
3359 SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
3361 if(SYNCHRONOUS) {
3362 SPRINTF("synchronously operating targets (tick=50 ns):\n");
3363 for (i = 0; i < 8; i++)
3364 if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
3365 SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n",
3367 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
3368 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
3369 HOSTDATA(shpnt)->syncrate[i] & 0x0f);
3371 #if defined(AHA152X_DEBUG)
3372 #define PDEBUG(flags,txt) \
3373 if(HOSTDATA(shpnt)->debug & flags) SPRINTF("(%s) ", txt);
3375 SPRINTF("enabled debugging options: ");
3377 PDEBUG(debug_procinfo, "procinfo");
3378 PDEBUG(debug_queue, "queue");
3379 PDEBUG(debug_intr, "interrupt");
3380 PDEBUG(debug_selection, "selection");
3381 PDEBUG(debug_msgo, "message out");
3382 PDEBUG(debug_msgi, "message in");
3383 PDEBUG(debug_status, "status");
3384 PDEBUG(debug_cmd, "command");
3385 PDEBUG(debug_datai, "data in");
3386 PDEBUG(debug_datao, "data out");
3387 PDEBUG(debug_eh, "eh");
3388 PDEBUG(debug_locks, "locks");
3389 PDEBUG(debug_phases, "phases");
3391 SPRINTF("\n");
3392 #endif
3394 SPRINTF("\nqueue status:\n");
3395 DO_LOCK(flags);
3396 if (ISSUE_SC) {
3397 SPRINTF("not yet issued commands:\n");
3398 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
3399 pos += get_command(pos, ptr);
3400 } else
3401 SPRINTF("no not yet issued commands\n");
3402 DO_UNLOCK(flags);
3404 if (CURRENT_SC) {
3405 SPRINTF("current command:\n");
3406 pos += get_command(pos, CURRENT_SC);
3407 } else
3408 SPRINTF("no current command\n");
3410 if (DISCONNECTED_SC) {
3411 SPRINTF("disconnected commands:\n");
3412 for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
3413 pos += get_command(pos, ptr);
3414 } else
3415 SPRINTF("no disconnected commands\n");
3417 pos += get_ports(shpnt, pos);
3419 #if defined(AHA152X_STAT)
3420 SPRINTF("statistics:\n"
3421 "total commands: %d\n"
3422 "disconnections: %d\n"
3423 "busfree with check condition: %d\n"
3424 "busfree without old command: %d\n"
3425 "busfree without new command: %d\n"
3426 "busfree without done command: %d\n"
3427 "busfree without any action: %d\n"
3428 "state "
3429 "transitions "
3430 "count "
3431 "time\n",
3432 HOSTDATA(shpnt)->total_commands,
3433 HOSTDATA(shpnt)->disconnections,
3434 HOSTDATA(shpnt)->busfree_with_check_condition,
3435 HOSTDATA(shpnt)->busfree_without_old_command,
3436 HOSTDATA(shpnt)->busfree_without_new_command,
3437 HOSTDATA(shpnt)->busfree_without_done_command,
3438 HOSTDATA(shpnt)->busfree_without_any_action);
3439 for(i=0; i<maxstate; i++) {
3440 SPRINTF("%-10s %-12d %-12d %-12ld\n",
3441 states[i].name,
3442 HOSTDATA(shpnt)->count_trans[i],
3443 HOSTDATA(shpnt)->count[i],
3444 HOSTDATA(shpnt)->time[i]);
3446 #endif
3448 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: pos=%p\n", pos);
3450 thislength = pos - (buffer + offset);
3451 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: length=%d thislength=%d\n", length, thislength);
3453 if(thislength<0) {
3454 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: output too short\n");
3455 *start = NULL;
3456 return 0;
3459 thislength = thislength<length ? thislength : length;
3461 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: return %d\n", thislength);
3463 *start = buffer + offset;
3464 return thislength < length ? thislength : length;
3467 static struct scsi_host_template aha152x_driver_template = {
3468 .module = THIS_MODULE,
3469 .name = AHA152X_REVID,
3470 .proc_name = "aha152x",
3471 .proc_info = aha152x_proc_info,
3472 .queuecommand = aha152x_queue,
3473 .eh_abort_handler = aha152x_abort,
3474 .eh_device_reset_handler = aha152x_device_reset,
3475 .eh_bus_reset_handler = aha152x_bus_reset,
3476 .eh_host_reset_handler = aha152x_host_reset,
3477 .bios_param = aha152x_biosparam,
3478 .can_queue = 1,
3479 .this_id = 7,
3480 .sg_tablesize = SG_ALL,
3481 .cmd_per_lun = 1,
3482 .use_clustering = DISABLE_CLUSTERING,
3485 #if !defined(PCMCIA)
3486 static int setup_count;
3487 static struct aha152x_setup setup[2];
3489 /* possible i/o addresses for the AIC-6260; default first */
3490 static unsigned short ports[] = { 0x340, 0x140 };
3492 #if !defined(SKIP_BIOSTEST)
3493 /* possible locations for the Adaptec BIOS; defaults first */
3494 static unsigned int addresses[] =
3496 0xdc000, /* default first */
3497 0xc8000,
3498 0xcc000,
3499 0xd0000,
3500 0xd4000,
3501 0xd8000,
3502 0xe0000,
3503 0xeb800, /* VTech Platinum SMP */
3504 0xf0000,
3507 /* signatures for various AIC-6[23]60 based controllers.
3508 The point in detecting signatures is to avoid useless and maybe
3509 harmful probes on ports. I'm not sure that all listed boards pass
3510 auto-configuration. For those which fail the BIOS signature is
3511 obsolete, because user intervention to supply the configuration is
3512 needed anyway. May be an information whether or not the BIOS supports
3513 extended translation could be also useful here. */
3514 static struct signature {
3515 unsigned char *signature;
3516 int sig_offset;
3517 int sig_length;
3518 } signatures[] =
3520 { "Adaptec AHA-1520 BIOS", 0x102e, 21 },
3521 /* Adaptec 152x */
3522 { "Adaptec AHA-1520B", 0x000b, 17 },
3523 /* Adaptec 152x rev B */
3524 { "Adaptec AHA-1520B", 0x0026, 17 },
3525 /* Iomega Jaz Jet ISA (AIC6370Q) */
3526 { "Adaptec ASW-B626 BIOS", 0x1029, 21 },
3527 /* on-board controller */
3528 { "Adaptec BIOS: ASW-B626", 0x000f, 22 },
3529 /* on-board controller */
3530 { "Adaptec ASW-B626 S2", 0x2e6c, 19 },
3531 /* on-board controller */
3532 { "Adaptec BIOS:AIC-6360", 0x000c, 21 },
3533 /* on-board controller */
3534 { "ScsiPro SP-360 BIOS", 0x2873, 19 },
3535 /* ScsiPro-Controller */
3536 { "GA-400 LOCAL BUS SCSI BIOS", 0x102e, 26 },
3537 /* Gigabyte Local-Bus-SCSI */
3538 { "Adaptec BIOS:AVA-282X", 0x000c, 21 },
3539 /* Adaptec 282x */
3540 { "Adaptec IBM Dock II SCSI", 0x2edd, 24 },
3541 /* IBM Thinkpad Dock II */
3542 { "Adaptec BIOS:AHA-1532P", 0x001c, 22 },
3543 /* IBM Thinkpad Dock II SCSI */
3544 { "DTC3520A Host Adapter BIOS", 0x318a, 26 },
3545 /* DTC 3520A ISA SCSI */
3547 #endif /* !SKIP_BIOSTEST */
3550 * Test, if port_base is valid.
3553 static int aha152x_porttest(int io_port)
3555 int i;
3557 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
3558 for (i = 0; i < 16; i++)
3559 SETPORT(io_port + O_STACK, i);
3561 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
3562 for (i = 0; i < 16 && GETPORT(io_port + O_STACK) == i; i++)
3565 return (i == 16);
3568 static int tc1550_porttest(int io_port)
3570 int i;
3572 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3573 for (i = 0; i < 16; i++)
3574 SETPORT(io_port + O_STACK, i);
3576 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3577 for (i = 0; i < 16 && GETPORT(io_port + O_TC_STACK) == i; i++)
3580 return (i == 16);
3584 static int checksetup(struct aha152x_setup *setup)
3586 int i;
3587 for (i = 0; i < ARRAY_SIZE(ports) && (setup->io_port != ports[i]); i++)
3590 if (i == ARRAY_SIZE(ports))
3591 return 0;
3593 if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) {
3594 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
3595 return 0;
3598 if( aha152x_porttest(setup->io_port) ) {
3599 setup->tc1550=0;
3600 } else if( tc1550_porttest(setup->io_port) ) {
3601 setup->tc1550=1;
3602 } else {
3603 release_region(setup->io_port, IO_RANGE);
3604 return 0;
3607 release_region(setup->io_port, IO_RANGE);
3609 if ((setup->irq < IRQ_MIN) || (setup->irq > IRQ_MAX))
3610 return 0;
3612 if ((setup->scsiid < 0) || (setup->scsiid > 7))
3613 return 0;
3615 if ((setup->reconnect < 0) || (setup->reconnect > 1))
3616 return 0;
3618 if ((setup->parity < 0) || (setup->parity > 1))
3619 return 0;
3621 if ((setup->synchronous < 0) || (setup->synchronous > 1))
3622 return 0;
3624 if ((setup->ext_trans < 0) || (setup->ext_trans > 1))
3625 return 0;
3628 return 1;
3632 static int __init aha152x_init(void)
3634 int i, j, ok;
3635 #if defined(AUTOCONF)
3636 aha152x_config conf;
3637 #endif
3638 #ifdef __ISAPNP__
3639 struct pnp_dev *dev=NULL, *pnpdev[2] = {NULL, NULL};
3640 #endif
3642 if ( setup_count ) {
3643 printk(KERN_INFO "aha152x: processing commandline: ");
3645 for (i = 0; i<setup_count; i++) {
3646 if (!checksetup(&setup[i])) {
3647 printk(KERN_ERR "\naha152x: %s\n", setup[i].conf);
3648 printk(KERN_ERR "aha152x: invalid line\n");
3651 printk("ok\n");
3654 #if defined(SETUP0)
3655 if (setup_count < ARRAY_SIZE(setup)) {
3656 struct aha152x_setup override = SETUP0;
3658 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3659 if (!checksetup(&override)) {
3660 printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3661 override.io_port,
3662 override.irq,
3663 override.scsiid,
3664 override.reconnect,
3665 override.parity,
3666 override.synchronous,
3667 override.delay,
3668 override.ext_trans);
3669 } else
3670 setup[setup_count++] = override;
3673 #endif
3675 #if defined(SETUP1)
3676 if (setup_count < ARRAY_SIZE(setup)) {
3677 struct aha152x_setup override = SETUP1;
3679 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3680 if (!checksetup(&override)) {
3681 printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3682 override.io_port,
3683 override.irq,
3684 override.scsiid,
3685 override.reconnect,
3686 override.parity,
3687 override.synchronous,
3688 override.delay,
3689 override.ext_trans);
3690 } else
3691 setup[setup_count++] = override;
3694 #endif
3696 #if defined(MODULE)
3697 if (setup_count<ARRAY_SIZE(setup) && (aha152x[0]!=0 || io[0]!=0 || irq[0]!=0)) {
3698 if(aha152x[0]!=0) {
3699 setup[setup_count].conf = "";
3700 setup[setup_count].io_port = aha152x[0];
3701 setup[setup_count].irq = aha152x[1];
3702 setup[setup_count].scsiid = aha152x[2];
3703 setup[setup_count].reconnect = aha152x[3];
3704 setup[setup_count].parity = aha152x[4];
3705 setup[setup_count].synchronous = aha152x[5];
3706 setup[setup_count].delay = aha152x[6];
3707 setup[setup_count].ext_trans = aha152x[7];
3708 #if defined(AHA152X_DEBUG)
3709 setup[setup_count].debug = aha152x[8];
3710 #endif
3711 } else if(io[0]!=0 || irq[0]!=0) {
3712 if(io[0]!=0) setup[setup_count].io_port = io[0];
3713 if(irq[0]!=0) setup[setup_count].irq = irq[0];
3715 setup[setup_count].scsiid = scsiid[0];
3716 setup[setup_count].reconnect = reconnect[0];
3717 setup[setup_count].parity = parity[0];
3718 setup[setup_count].synchronous = sync[0];
3719 setup[setup_count].delay = delay[0];
3720 setup[setup_count].ext_trans = exttrans[0];
3721 #if defined(AHA152X_DEBUG)
3722 setup[setup_count].debug = debug[0];
3723 #endif
3726 if (checksetup(&setup[setup_count]))
3727 setup_count++;
3728 else
3729 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3730 setup[setup_count].io_port,
3731 setup[setup_count].irq,
3732 setup[setup_count].scsiid,
3733 setup[setup_count].reconnect,
3734 setup[setup_count].parity,
3735 setup[setup_count].synchronous,
3736 setup[setup_count].delay,
3737 setup[setup_count].ext_trans);
3740 if (setup_count<ARRAY_SIZE(setup) && (aha152x1[0]!=0 || io[1]!=0 || irq[1]!=0)) {
3741 if(aha152x1[0]!=0) {
3742 setup[setup_count].conf = "";
3743 setup[setup_count].io_port = aha152x1[0];
3744 setup[setup_count].irq = aha152x1[1];
3745 setup[setup_count].scsiid = aha152x1[2];
3746 setup[setup_count].reconnect = aha152x1[3];
3747 setup[setup_count].parity = aha152x1[4];
3748 setup[setup_count].synchronous = aha152x1[5];
3749 setup[setup_count].delay = aha152x1[6];
3750 setup[setup_count].ext_trans = aha152x1[7];
3751 #if defined(AHA152X_DEBUG)
3752 setup[setup_count].debug = aha152x1[8];
3753 #endif
3754 } else if(io[1]!=0 || irq[1]!=0) {
3755 if(io[1]!=0) setup[setup_count].io_port = io[1];
3756 if(irq[1]!=0) setup[setup_count].irq = irq[1];
3758 setup[setup_count].scsiid = scsiid[1];
3759 setup[setup_count].reconnect = reconnect[1];
3760 setup[setup_count].parity = parity[1];
3761 setup[setup_count].synchronous = sync[1];
3762 setup[setup_count].delay = delay[1];
3763 setup[setup_count].ext_trans = exttrans[1];
3764 #if defined(AHA152X_DEBUG)
3765 setup[setup_count].debug = debug[1];
3766 #endif
3768 if (checksetup(&setup[setup_count]))
3769 setup_count++;
3770 else
3771 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3772 setup[setup_count].io_port,
3773 setup[setup_count].irq,
3774 setup[setup_count].scsiid,
3775 setup[setup_count].reconnect,
3776 setup[setup_count].parity,
3777 setup[setup_count].synchronous,
3778 setup[setup_count].delay,
3779 setup[setup_count].ext_trans);
3781 #endif
3783 #ifdef __ISAPNP__
3784 for(i=0; setup_count<ARRAY_SIZE(setup) && id_table[i].vendor; i++) {
3785 while ( setup_count<ARRAY_SIZE(setup) &&
3786 (dev=pnp_find_dev(NULL, id_table[i].vendor, id_table[i].function, dev)) ) {
3787 if (pnp_device_attach(dev) < 0)
3788 continue;
3790 if (pnp_activate_dev(dev) < 0) {
3791 pnp_device_detach(dev);
3792 continue;
3795 if (!pnp_port_valid(dev, 0)) {
3796 pnp_device_detach(dev);
3797 continue;
3800 if (setup_count==1 && pnp_port_start(dev, 0)==setup[0].io_port) {
3801 pnp_device_detach(dev);
3802 continue;
3805 setup[setup_count].io_port = pnp_port_start(dev, 0);
3806 setup[setup_count].irq = pnp_irq(dev, 0);
3807 setup[setup_count].scsiid = 7;
3808 setup[setup_count].reconnect = 1;
3809 setup[setup_count].parity = 1;
3810 setup[setup_count].synchronous = 1;
3811 setup[setup_count].delay = DELAY_DEFAULT;
3812 setup[setup_count].ext_trans = 0;
3813 #if defined(AHA152X_DEBUG)
3814 setup[setup_count].debug = DEBUG_DEFAULT;
3815 #endif
3816 #if defined(__ISAPNP__)
3817 pnpdev[setup_count] = dev;
3818 #endif
3819 printk (KERN_INFO
3820 "aha152x: found ISAPnP adapter at io=0x%03x, irq=%d\n",
3821 setup[setup_count].io_port, setup[setup_count].irq);
3822 setup_count++;
3825 #endif
3827 #if defined(AUTOCONF)
3828 if (setup_count<ARRAY_SIZE(setup)) {
3829 #if !defined(SKIP_BIOSTEST)
3830 ok = 0;
3831 for (i = 0; i < ARRAY_SIZE(addresses) && !ok; i++) {
3832 void __iomem *p = ioremap(addresses[i], 0x4000);
3833 if (!p)
3834 continue;
3835 for (j = 0; j<ARRAY_SIZE(signatures) && !ok; j++)
3836 ok = check_signature(p + signatures[j].sig_offset,
3837 signatures[j].signature, signatures[j].sig_length);
3838 iounmap(p);
3840 if (!ok && setup_count == 0)
3841 return 0;
3843 printk(KERN_INFO "aha152x: BIOS test: passed, ");
3844 #else
3845 printk(KERN_INFO "aha152x: ");
3846 #endif /* !SKIP_BIOSTEST */
3848 ok = 0;
3849 for (i = 0; i < ARRAY_SIZE(ports) && setup_count < 2; i++) {
3850 if ((setup_count == 1) && (setup[0].io_port == ports[i]))
3851 continue;
3853 if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) {
3854 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
3855 continue;
3858 if (aha152x_porttest(ports[i])) {
3859 setup[setup_count].tc1550 = 0;
3861 conf.cf_port =
3862 (GETPORT(ports[i] + O_PORTA) << 8) + GETPORT(ports[i] + O_PORTB);
3863 } else if (tc1550_porttest(ports[i])) {
3864 setup[setup_count].tc1550 = 1;
3866 conf.cf_port =
3867 (GETPORT(ports[i] + O_TC_PORTA) << 8) + GETPORT(ports[i] + O_TC_PORTB);
3868 } else {
3869 release_region(ports[i], IO_RANGE);
3870 continue;
3873 release_region(ports[i], IO_RANGE);
3875 ok++;
3876 setup[setup_count].io_port = ports[i];
3877 setup[setup_count].irq = IRQ_MIN + conf.cf_irq;
3878 setup[setup_count].scsiid = conf.cf_id;
3879 setup[setup_count].reconnect = conf.cf_tardisc;
3880 setup[setup_count].parity = !conf.cf_parity;
3881 setup[setup_count].synchronous = conf.cf_syncneg;
3882 setup[setup_count].delay = DELAY_DEFAULT;
3883 setup[setup_count].ext_trans = 0;
3884 #if defined(AHA152X_DEBUG)
3885 setup[setup_count].debug = DEBUG_DEFAULT;
3886 #endif
3887 setup_count++;
3891 if (ok)
3892 printk("auto configuration: ok, ");
3894 #endif
3896 printk("%d controller(s) configured\n", setup_count);
3898 for (i=0; i<setup_count; i++) {
3899 if ( request_region(setup[i].io_port, IO_RANGE, "aha152x") ) {
3900 struct Scsi_Host *shpnt = aha152x_probe_one(&setup[i]);
3902 if( !shpnt ) {
3903 release_region(setup[i].io_port, IO_RANGE);
3904 #if defined(__ISAPNP__)
3905 } else if( pnpdev[i] ) {
3906 HOSTDATA(shpnt)->pnpdev=pnpdev[i];
3907 pnpdev[i]=NULL;
3908 #endif
3910 } else {
3911 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup[i].io_port);
3914 #if defined(__ISAPNP__)
3915 if( pnpdev[i] )
3916 pnp_device_detach(pnpdev[i]);
3917 #endif
3920 return registered_count>0;
3923 static void __exit aha152x_exit(void)
3925 int i;
3927 for(i=0; i<ARRAY_SIZE(setup); i++) {
3928 aha152x_release(aha152x_host[i]);
3929 aha152x_host[i]=NULL;
3933 module_init(aha152x_init);
3934 module_exit(aha152x_exit);
3936 #if !defined(MODULE)
3937 static int __init aha152x_setup(char *str)
3939 #if defined(AHA152X_DEBUG)
3940 int ints[11];
3941 #else
3942 int ints[10];
3943 #endif
3944 get_options(str, ARRAY_SIZE(ints), ints);
3946 if(setup_count>=ARRAY_SIZE(setup)) {
3947 printk(KERN_ERR "aha152x: you can only configure up to two controllers\n");
3948 return 1;
3951 setup[setup_count].conf = str;
3952 setup[setup_count].io_port = ints[0] >= 1 ? ints[1] : 0x340;
3953 setup[setup_count].irq = ints[0] >= 2 ? ints[2] : 11;
3954 setup[setup_count].scsiid = ints[0] >= 3 ? ints[3] : 7;
3955 setup[setup_count].reconnect = ints[0] >= 4 ? ints[4] : 1;
3956 setup[setup_count].parity = ints[0] >= 5 ? ints[5] : 1;
3957 setup[setup_count].synchronous = ints[0] >= 6 ? ints[6] : 1;
3958 setup[setup_count].delay = ints[0] >= 7 ? ints[7] : DELAY_DEFAULT;
3959 setup[setup_count].ext_trans = ints[0] >= 8 ? ints[8] : 0;
3960 #if defined(AHA152X_DEBUG)
3961 setup[setup_count].debug = ints[0] >= 9 ? ints[9] : DEBUG_DEFAULT;
3962 if (ints[0] > 9) {
3963 printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
3964 "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>[,<DEBUG>]]]]]]]]\n");
3965 #else
3966 if (ints[0] > 8) { /*}*/
3967 printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
3968 "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>]]]]]]]\n");
3969 #endif
3970 } else {
3971 setup_count++;
3972 return 0;
3975 return 1;
3977 __setup("aha152x=", aha152x_setup);
3978 #endif
3980 #endif /* !PCMCIA */