PCI: pciehp: Track enable/disable status

[linux/fpc-iii.git] / include / media / v4l2-device.h

/*
    V4L2 device support header.

    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#ifndef _V4L2_DEVICE_H
#define _V4L2_DEVICE_H

#include <media/media-device.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-dev.h>

#define V4L2_DEVICE_NAME_SIZE (20 + 16)

struct v4l2_ctrl_handler;

/**
 * struct v4l2_device - main struct to for V4L2 device drivers
 *
 * @dev: pointer to struct device.
 * @mdev: pointer to struct media_device, may be NULL.
 * @subdevs: used to keep track of the registered subdevs
 * @lock: lock this struct; can be used by the driver as well
 *      if this struct is embedded into a larger struct.
 * @name: unique device name, by default the driver name + bus ID
 * @notify: notify operation called by some sub-devices.
 * @ctrl_handler: The control handler. May be %NULL.
 * @prio: Device's priority state
 * @ref: Keep track of the references to this struct.
 * @release: Release function that is called when the ref count
 *      goes to 0.
 *
 * Each instance of a V4L2 device should create the v4l2_device struct,
 * either stand-alone or embedded in a larger struct.
 *
 * It allows easy access to sub-devices (see v4l2-subdev.h) and provides
 * basic V4L2 device-level support.
 *
 * .. note::
 *
 *    #) @dev->driver_data points to this struct.
 *    #) @dev might be %NULL if there is no parent device
 */
struct v4l2_device {
        struct device *dev;
        struct media_device *mdev;
        struct list_head subdevs;
        spinlock_t lock;
        char name[V4L2_DEVICE_NAME_SIZE];
        void (*notify)(struct v4l2_subdev *sd,
                        unsigned int notification, void *arg);
        struct v4l2_ctrl_handler *ctrl_handler;
        struct v4l2_prio_state prio;
        struct kref ref;
        void (*release)(struct v4l2_device *v4l2_dev);
};

/**
 * v4l2_device_get - gets a V4L2 device reference
 *
 * @v4l2_dev: pointer to struct &v4l2_device
 *
 * This is an ancillary routine meant to increment the usage for the
 * struct &v4l2_device pointed by @v4l2_dev.
 */
static inline void v4l2_device_get(struct v4l2_device *v4l2_dev)
{
        kref_get(&v4l2_dev->ref);
}

/**
 * v4l2_device_put - putss a V4L2 device reference
 *
 * @v4l2_dev: pointer to struct &v4l2_device
 *
 * This is an ancillary routine meant to decrement the usage for the
 * struct &v4l2_device pointed by @v4l2_dev.
 */
int v4l2_device_put(struct v4l2_device *v4l2_dev);

/**
 * v4l2_device_register - Initialize v4l2_dev and make @dev->driver_data
 *      point to @v4l2_dev.
 *
 * @dev: pointer to struct &device
 * @v4l2_dev: pointer to struct &v4l2_device
 *
 * .. note::
 *      @dev may be %NULL in rare cases (ISA devices).
 *      In such case the caller must fill in the @v4l2_dev->name field
 *      before calling this function.
 */
int __must_check v4l2_device_register(struct device *dev,
                                      struct v4l2_device *v4l2_dev);

/**
 * v4l2_device_set_name - Optional function to initialize the
 *      name field of struct &v4l2_device
 *
 * @v4l2_dev: pointer to struct &v4l2_device
 * @basename: base name for the device name
 * @instance: pointer to a static atomic_t var with the instance usage for
 *      the device driver.
 *
 * v4l2_device_set_name() initializes the name field of struct &v4l2_device
 * using the driver name and a driver-global atomic_t instance.
 *
 * This function will increment the instance counter and returns the
 * instance value used in the name.
 *
 * Example:
 *
 *   static atomic_t drv_instance = ATOMIC_INIT(0);
 *
 *   ...
 *
 *   instance = v4l2_device_set_name(&\ v4l2_dev, "foo", &\ drv_instance);
 *
 * The first time this is called the name field will be set to foo0 and
 * this function returns 0. If the name ends with a digit (e.g. cx18),
 * then the name will be set to cx18-0 since cx180 would look really odd.
 */
int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
                         atomic_t *instance);

/**
 * v4l2_device_disconnect - Change V4L2 device state to disconnected.
 *
 * @v4l2_dev: pointer to struct v4l2_device
 *
 * Should be called when the USB parent disconnects.
 * Since the parent disappears, this ensures that @v4l2_dev doesn't have
 * an invalid parent pointer.
 *
 * .. note:: This function sets @v4l2_dev->dev to NULL.
 */
void v4l2_device_disconnect(struct v4l2_device *v4l2_dev);

/**
 *  v4l2_device_unregister - Unregister all sub-devices and any other
 *       resources related to @v4l2_dev.
 *
 * @v4l2_dev: pointer to struct v4l2_device
 */
void v4l2_device_unregister(struct v4l2_device *v4l2_dev);

/**
 * v4l2_device_register_subdev - Registers a subdev with a v4l2 device.
 *
 * @v4l2_dev: pointer to struct &v4l2_device
 * @sd: pointer to &struct v4l2_subdev
 *
 * While registered, the subdev module is marked as in-use.
 *
 * An error is returned if the module is no longer loaded on any attempts
 * to register it.
 */
int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
                                             struct v4l2_subdev *sd);

/**
 * v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device.
 *
 * @sd: pointer to &struct v4l2_subdev
 *
 * .. note ::
 *
 *      Can also be called if the subdev wasn't registered. In such
 *      case, it will do nothing.
 */
void v4l2_device_unregister_subdev(struct v4l2_subdev *sd);

/**
 * v4l2_device_register_subdev_nodes - Registers device nodes for all subdevs
 *      of the v4l2 device that are marked with
 *      the %V4L2_SUBDEV_FL_HAS_DEVNODE flag.
 *
 * @v4l2_dev: pointer to struct v4l2_device
 */
int __must_check
v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);

/**
 * v4l2_subdev_notify - Sends a notification to v4l2_device.
 *
 * @sd: pointer to &struct v4l2_subdev
 * @notification: type of notification. Please notice that the notification
 *      type is driver-specific.
 * @arg: arguments for the notification. Those are specific to each
 *      notification type.
 */
static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
                                      unsigned int notification, void *arg)
{
        if (sd && sd->v4l2_dev && sd->v4l2_dev->notify)
                sd->v4l2_dev->notify(sd, notification, arg);
}

/* Helper macros to iterate over all subdevs. */

/**
 * v4l2_device_for_each_subdev - Helper macro that interates over all
 *      sub-devices of a given &v4l2_device.
 *
 * @sd: pointer that will be filled by the macro with all
 *      &struct v4l2_subdev pointer used as an iterator by the loop.
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 *
 * This macro iterates over all sub-devices owned by the @v4l2_dev device.
 * It acts as a for loop iterator and executes the next statement with
 * the @sd variable pointing to each sub-device in turn.
 */
#define v4l2_device_for_each_subdev(sd, v4l2_dev)                       \
        list_for_each_entry(sd, &(v4l2_dev)->subdevs, list)

/**
 * __v4l2_device_call_subdevs_p - Calls the specified operation for
 *      all subdevs matching the condition.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @sd: pointer that will be filled by the macro with all
 *      &struct v4l2_subdev pointer used as an iterator by the loop.
 * @cond: condition to be match
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Ignore any errors.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...) \
        do {                                                            \
                list_for_each_entry((sd), &(v4l2_dev)->subdevs, list)   \
                        if ((cond) && (sd)->ops->o && (sd)->ops->o->f)  \
                                (sd)->ops->o->f((sd) , ##args);         \
        } while (0)

/**
 * __v4l2_device_call_subdevs - Calls the specified operation for
 *      all subdevs matching the condition.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @cond: condition to be match
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Ignore any errors.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...)       \
        do {                                                            \
                struct v4l2_subdev *__sd;                               \
                                                                        \
                __v4l2_device_call_subdevs_p(v4l2_dev, __sd, cond, o,   \
                                                f , ##args);            \
        } while (0)

/**
 * __v4l2_device_call_subdevs_until_err_p - Calls the specified operation for
 *      all subdevs matching the condition.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @sd: pointer that will be filled by the macro with all
 *      &struct v4l2_subdev sub-devices associated with @v4l2_dev.
 * @cond: condition to be match
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Return:
 *
 * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
 * for any subdevice, then abort and return with that error code, zero
 * otherwise.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \
({                                                                      \
        long __err = 0;                                                 \
                                                                        \
        list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) {         \
                if ((cond) && (sd)->ops->o && (sd)->ops->o->f)          \
                        __err = (sd)->ops->o->f((sd) , ##args);         \
                if (__err && __err != -ENOIOCTLCMD)                     \
                        break;                                          \
        }                                                               \
        (__err == -ENOIOCTLCMD) ? 0 : __err;                            \
})

/**
 * __v4l2_device_call_subdevs_until_err - Calls the specified operation for
 *      all subdevs matching the condition.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @cond: condition to be match
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Return:
 *
 * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
 * for any subdevice, then abort and return with that error code,
 * zero otherwise.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \
({                                                                      \
        struct v4l2_subdev *__sd;                                       \
        __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o, \
                                                f , ##args);            \
})

/**
 * v4l2_device_call_all - Calls the specified operation for
 *      all subdevs matching the &v4l2_subdev.grp_id, as assigned
 *      by the bridge driver.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpid: &struct v4l2_subdev->grp_id group ID to match.
 *          Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Ignore any errors.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...)            \
        do {                                                            \
                struct v4l2_subdev *__sd;                               \
                                                                        \
                __v4l2_device_call_subdevs_p(v4l2_dev, __sd,            \
                        !(grpid) || __sd->grp_id == (grpid), o, f ,     \
                        ##args);                                        \
        } while (0)

/**
 * v4l2_device_call_until_err - Calls the specified operation for
 *      all subdevs matching the &v4l2_subdev.grp_id, as assigned
 *      by the bridge driver, until an error occurs.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpid: &struct v4l2_subdev->grp_id group ID to match.
 *         Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Return:
 *
 * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
 * for any subdevice, then abort and return with that error code,
 * zero otherwise.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...)      \
({                                                                      \
        struct v4l2_subdev *__sd;                                       \
        __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,          \
                        !(grpid) || __sd->grp_id == (grpid), o, f ,     \
                        ##args);                                        \
})

/**
 * v4l2_device_mask_call_all - Calls the specified operation for
 *      all subdevices where a group ID matches a specified bitmask.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
 *          group ID to be matched. Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Ignore any errors.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define v4l2_device_mask_call_all(v4l2_dev, grpmsk, o, f, args...)      \
        do {                                                            \
                struct v4l2_subdev *__sd;                               \
                                                                        \
                __v4l2_device_call_subdevs_p(v4l2_dev, __sd,            \
                        !(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,  \
                        ##args);                                        \
        } while (0)

/**
 * v4l2_device_mask_call_until_err - Calls the specified operation for
 *      all subdevices where a group ID matches a specified bitmask.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
 *          group ID to be matched. Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 * @args...: arguments for @f.
 *
 * Return:
 *
 * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
 * for any subdevice, then abort and return with that error code,
 * zero otherwise.
 *
 * Note: subdevs cannot be added or deleted while walking
 * the subdevs list.
 */
#define v4l2_device_mask_call_until_err(v4l2_dev, grpmsk, o, f, args...) \
({                                                                      \
        struct v4l2_subdev *__sd;                                       \
        __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,          \
                        !(grpmsk) || (__sd->grp_id & (grpmsk)), o, f ,  \
                        ##args);                                        \
})


/**
 * v4l2_device_has_op - checks if any subdev with matching grpid has a
 *      given ops.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpid: &struct v4l2_subdev->grp_id group ID to match.
 *         Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 */
#define v4l2_device_has_op(v4l2_dev, grpid, o, f)                       \
({                                                                      \
        struct v4l2_subdev *__sd;                                       \
        bool __result = false;                                          \
        list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) {         \
                if ((grpid) && __sd->grp_id != (grpid))                 \
                        continue;                                       \
                if (v4l2_subdev_has_op(__sd, o, f)) {                   \
                        __result = true;                                \
                        break;                                          \
                }                                                       \
        }                                                               \
        __result;                                                       \
})

/**
 * v4l2_device_mask_has_op - checks if any subdev with matching group
 *      mask has a given ops.
 *
 * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
 * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
 *          group ID to be matched. Use 0 to match them all.
 * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
 *     Each element there groups a set of operations functions.
 * @f: operation function that will be called if @cond matches.
 *      The operation functions are defined in groups, according to
 *      each element at &struct v4l2_subdev_ops.
 */
#define v4l2_device_mask_has_op(v4l2_dev, grpmsk, o, f)                 \
({                                                                      \
        struct v4l2_subdev *__sd;                                       \
        bool __result = false;                                          \
        list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) {         \
                if ((grpmsk) && !(__sd->grp_id & (grpmsk)))             \
                        continue;                                       \
                if (v4l2_subdev_has_op(__sd, o, f)) {                   \
                        __result = true;                                \
                        break;                                          \
                }                                                       \
        }                                                               \
        __result;                                                       \
})

#endif