?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mac80211: small rate control changes
[linux/fpc-iii.git] / drivers / usb / serial / mos7720.c
blob7c4917d77c0a4bf5583ddb53806dae79cb308f9b
1 /*
2 * mos7720.c
3 * Controls the Moschip 7720 usb to dual port serial convertor
4 *
5 * Copyright 2006 Moschip Semiconductor Tech. Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation, version 2 of the License.
10 *
11 * Developed by:
12 * Vijaya Kumar <vijaykumar.gn@gmail.com>
13 * Ajay Kumar <naanuajay@yahoo.com>
14 * Gurudeva <ngurudeva@yahoo.com>
15 *
16 * Cleaned up from the original by:
17 * Greg Kroah-Hartman <gregkh@suse.de>
18 *
19 * Originally based on drivers/usb/serial/io_edgeport.c which is:
20 * Copyright (C) 2000 Inside Out Networks, All rights reserved.
21 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
22 */
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/tty.h>
28 #include <linux/tty_driver.h>
29 #include <linux/tty_flip.h>
30 #include <linux/module.h>
31 #include <linux/spinlock.h>
32 #include <linux/serial.h>
33 #include <linux/serial_reg.h>
34 #include <linux/usb.h>
35 #include <linux/usb/serial.h>
36 #include <linux/uaccess.h>
37
38
39 /*
40 * Version Information
41 */
42 #define DRIVER_VERSION "1.0.0.4F"
43 #define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
44 #define DRIVER_DESC "Moschip USB Serial Driver"
45
46 /* default urb timeout */
47 #define MOS_WDR_TIMEOUT (HZ * 5)
48
49 #define MOS_PORT1 0x0200
50 #define MOS_PORT2 0x0300
51 #define MOS_VENREG 0x0000
52 #define MOS_MAX_PORT 0x02
53 #define MOS_WRITE 0x0E
54 #define MOS_READ 0x0D
55
56 /* Interrupt Rotinue Defines */
57 #define SERIAL_IIR_RLS 0x06
58 #define SERIAL_IIR_RDA 0x04
59 #define SERIAL_IIR_CTI 0x0c
60 #define SERIAL_IIR_THR 0x02
61 #define SERIAL_IIR_MS 0x00
62
63 #define NUM_URBS 16 /* URB Count */
64 #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
65
66 /* This structure holds all of the local port information */
67 struct moschip_port {
68 __u8 shadowLCR; /* last LCR value received */
69 __u8 shadowMCR; /* last MCR value received */
70 __u8 shadowMSR; /* last MSR value received */
71 char open;
72 struct async_icount icount;
73 struct usb_serial_port *port; /* loop back to the owner */
74 struct urb *write_urb_pool[NUM_URBS];
75 };
76
77 /* This structure holds all of the individual serial device information */
78 struct moschip_serial {
79 int interrupt_started;
80 };
81
82 static int debug;
83
84 #define USB_VENDOR_ID_MOSCHIP 0x9710
85 #define MOSCHIP_DEVICE_ID_7720 0x7720
86 #define MOSCHIP_DEVICE_ID_7715 0x7715
87
88 static struct usb_device_id moschip_port_id_table [] = {
89 { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
90 { } /* terminating entry */
91 };
92 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
93
94
95 /*
96 * mos7720_interrupt_callback
97 * this is the callback function for when we have received data on the
98 * interrupt endpoint.
99 */
100 static void mos7720_interrupt_callback(struct urb *urb)
101 {
102 int result;
103 int length;
104 int status = urb->status;
105 __u8 *data;
106 __u8 sp1;
107 __u8 sp2;
108
109 dbg("%s", " : Entering\n");
110
111 switch (status) {
112 case 0:
113 /* success */
114 break;
115 case -ECONNRESET:
116 case -ENOENT:
117 case -ESHUTDOWN:
118 /* this urb is terminated, clean up */
119 dbg("%s - urb shutting down with status: %d", __func__,
120 status);
121 return;
122 default:
123 dbg("%s - nonzero urb status received: %d", __func__,
124 status);
125 goto exit;
126 }
127
128 length = urb->actual_length;
129 data = urb->transfer_buffer;
130
131 /* Moschip get 4 bytes
132 * Byte 1 IIR Port 1 (port.number is 0)
133 * Byte 2 IIR Port 2 (port.number is 1)
134 * Byte 3 --------------
135 * Byte 4 FIFO status for both */
136
137 /* the above description is inverted
138 * oneukum 2007-03-14 */
139
140 if (unlikely(length != 4)) {
141 dbg("Wrong data !!!");
142 return;
143 }
144
145 sp1 = data[3];
146 sp2 = data[2];
147
148 if ((sp1 | sp2) & 0x01) {
149 /* No Interrupt Pending in both the ports */
150 dbg("No Interrupt !!!");
151 } else {
152 switch (sp1 & 0x0f) {
153 case SERIAL_IIR_RLS:
154 dbg("Serial Port 1: Receiver status error or address "
155 "bit detected in 9-bit mode\n");
156 break;
157 case SERIAL_IIR_CTI:
158 dbg("Serial Port 1: Receiver time out");
159 break;
160 case SERIAL_IIR_MS:
161 dbg("Serial Port 1: Modem status change");
162 break;
163 }
164
165 switch (sp2 & 0x0f) {
166 case SERIAL_IIR_RLS:
167 dbg("Serial Port 2: Receiver status error or address "
168 "bit detected in 9-bit mode");
169 break;
170 case SERIAL_IIR_CTI:
171 dbg("Serial Port 2: Receiver time out");
172 break;
173 case SERIAL_IIR_MS:
174 dbg("Serial Port 2: Modem status change");
175 break;
176 }
177 }
178
179 exit:
180 result = usb_submit_urb(urb, GFP_ATOMIC);
181 if (result)
182 dev_err(&urb->dev->dev,
183 "%s - Error %d submitting control urb\n",
184 __func__, result);
185 return;
186 }
187
188 /*
189 * mos7720_bulk_in_callback
190 * this is the callback function for when we have received data on the
191 * bulk in endpoint.
192 */
193 static void mos7720_bulk_in_callback(struct urb *urb)
194 {
195 int retval;
196 unsigned char *data ;
197 struct usb_serial_port *port;
198 struct moschip_port *mos7720_port;
199 struct tty_struct *tty;
200 int status = urb->status;
201
202 if (status) {
203 dbg("nonzero read bulk status received: %d", status);
204 return;
205 }
206
207 mos7720_port = urb->context;
208 if (!mos7720_port) {
209 dbg("%s", "NULL mos7720_port pointer \n");
210 return ;
211 }
212
213 port = mos7720_port->port;
214
215 dbg("Entering...%s", __func__);
216
217 data = urb->transfer_buffer;
218
219 tty = port->port.tty;
220 if (tty && urb->actual_length) {
221 tty_buffer_request_room(tty, urb->actual_length);
222 tty_insert_flip_string(tty, data, urb->actual_length);
223 tty_flip_buffer_push(tty);
224 }
225
226 if (!port->read_urb) {
227 dbg("URB KILLED !!!");
228 return;
229 }
230
231 if (port->read_urb->status != -EINPROGRESS) {
232 port->read_urb->dev = port->serial->dev;
233
234 retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
235 if (retval)
236 dbg("usb_submit_urb(read bulk) failed, retval = %d",
237 retval);
238 }
239 }
240
241 /*
242 * mos7720_bulk_out_data_callback
243 * this is the callback function for when we have finished sending serial
244 * data on the bulk out endpoint.
245 */
246 static void mos7720_bulk_out_data_callback(struct urb *urb)
247 {
248 struct moschip_port *mos7720_port;
249 struct tty_struct *tty;
250 int status = urb->status;
251
252 if (status) {
253 dbg("nonzero write bulk status received:%d", status);
254 return;
255 }
256
257 mos7720_port = urb->context;
258 if (!mos7720_port) {
259 dbg("NULL mos7720_port pointer");
260 return ;
261 }
262
263 dbg("Entering .........");
264
265 tty = mos7720_port->port->port.tty;
266
267 if (tty && mos7720_port->open)
268 tty_wakeup(tty);
269 }
270
271 /*
272 * send_mos_cmd
273 * this function will be used for sending command to device
274 */
275 static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
276 __u16 index, void *data)
277 {
278 int status;
279 unsigned int pipe;
280 u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
281 __u8 requesttype;
282 __u16 size = 0x0000;
283
284 if (value < MOS_MAX_PORT) {
285 if (product == MOSCHIP_DEVICE_ID_7715)
286 value = value*0x100+0x100;
287 else
288 value = value*0x100+0x200;
289 } else {
290 value = 0x0000;
291 if ((product == MOSCHIP_DEVICE_ID_7715) &&
292 (index != 0x08)) {
293 dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
294 /* index = 0x01 ; */
295 }
296 }
297
298 if (request == MOS_WRITE) {
299 request = (__u8)MOS_WRITE;
300 requesttype = (__u8)0x40;
301 value = value + (__u16)*((unsigned char *)data);
302 data = NULL;
303 pipe = usb_sndctrlpipe(serial->dev, 0);
304 } else {
305 request = (__u8)MOS_READ;
306 requesttype = (__u8)0xC0;
307 size = 0x01;
308 pipe = usb_rcvctrlpipe(serial->dev, 0);
309 }
310
311 status = usb_control_msg(serial->dev, pipe, request, requesttype,
312 value, index, data, size, MOS_WDR_TIMEOUT);
313
314 if (status < 0)
315 dbg("Command Write failed Value %x index %x\n", value, index);
316
317 return status;
318 }
319
320 static int mos7720_open(struct tty_struct *tty,
321 struct usb_serial_port *port, struct file *filp)
322 {
323 struct usb_serial *serial;
324 struct usb_serial_port *port0;
325 struct urb *urb;
326 struct moschip_serial *mos7720_serial;
327 struct moschip_port *mos7720_port;
328 int response;
329 int port_number;
330 char data;
331 int allocated_urbs = 0;
332 int j;
333
334 serial = port->serial;
335
336 mos7720_port = usb_get_serial_port_data(port);
337 if (mos7720_port == NULL)
338 return -ENODEV;
339
340 port0 = serial->port[0];
341
342 mos7720_serial = usb_get_serial_data(serial);
343
344 if (mos7720_serial == NULL || port0 == NULL)
345 return -ENODEV;
346
347 usb_clear_halt(serial->dev, port->write_urb->pipe);
348 usb_clear_halt(serial->dev, port->read_urb->pipe);
349
350 /* Initialising the write urb pool */
351 for (j = 0; j < NUM_URBS; ++j) {
352 urb = usb_alloc_urb(0, GFP_KERNEL);
353 mos7720_port->write_urb_pool[j] = urb;
354
355 if (urb == NULL) {
356 err("No more urbs???");
357 continue;
358 }
359
360 urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
361 GFP_KERNEL);
362 if (!urb->transfer_buffer) {
363 err("%s-out of memory for urb buffers.", __func__);
364 usb_free_urb(mos7720_port->write_urb_pool[j]);
365 mos7720_port->write_urb_pool[j] = NULL;
366 continue;
367 }
368 allocated_urbs++;
369 }
370
371 if (!allocated_urbs)
372 return -ENOMEM;
373
374 /* Initialize MCS7720 -- Write Init values to corresponding Registers
375 *
376 * Register Index
377 * 1 : IER
378 * 2 : FCR
379 * 3 : LCR
380 * 4 : MCR
381 *
382 * 0x08 : SP1/2 Control Reg
383 */
384 port_number = port->number - port->serial->minor;
385 send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
386 dbg("SS::%p LSR:%x\n", mos7720_port, data);
387
388 dbg("Check:Sending Command ..........");
389
390 data = 0x02;
391 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data);
392 data = 0x02;
393 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data);
394
395 data = 0x00;
396 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
397 data = 0x00;
398 send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
399
400 data = 0xCF;
401 send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
402 data = 0x03;
403 mos7720_port->shadowLCR = data;
404 send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
405 data = 0x0b;
406 mos7720_port->shadowMCR = data;
407 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
408 data = 0x0b;
409 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
410
411 data = 0x00;
412 send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
413 data = 0x00;
414 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
415
416 /* data = 0x00;
417 send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data);
418 data = 0x03;
419 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
420 data = 0x00;
421 send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
422 port_number + 1, &data);
423 */
424 data = 0x00;
425 send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
426
427 data = data | (port->number - port->serial->minor + 1);
428 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
429
430 data = 0x83;
431 mos7720_port->shadowLCR = data;
432 send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
433 data = 0x0c;
434 send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
435 data = 0x00;
436 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
437 data = 0x03;
438 mos7720_port->shadowLCR = data;
439 send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
440 data = 0x0c;
441 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
442 data = 0x0c;
443 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
444
445 /* force low_latency on so that our tty_push actually forces *
446 * the data through,otherwise it is scheduled, and with *
447 * high data rates (like with OHCI) data can get lost. */
448
449 if (tty)
450 tty->low_latency = 1;
451
452 /* see if we've set up our endpoint info yet *
453 * (can't set it up in mos7720_startup as the *
454 * structures were not set up at that time.) */
455 if (!mos7720_serial->interrupt_started) {
456 dbg("Interrupt buffer NULL !!!");
457
458 /* not set up yet, so do it now */
459 mos7720_serial->interrupt_started = 1;
460
461 dbg("To Submit URB !!!");
462
463 /* set up our interrupt urb */
464 usb_fill_int_urb(port0->interrupt_in_urb, serial->dev,
465 usb_rcvintpipe(serial->dev,
466 port->interrupt_in_endpointAddress),
467 port0->interrupt_in_buffer,
468 port0->interrupt_in_urb->transfer_buffer_length,
469 mos7720_interrupt_callback, mos7720_port,
470 port0->interrupt_in_urb->interval);
471
472 /* start interrupt read for this mos7720 this interrupt *
473 * will continue as long as the mos7720 is connected */
474 dbg("Submit URB over !!!");
475 response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
476 if (response)
477 dev_err(&port->dev,
478 "%s - Error %d submitting control urb\n",
479 __func__, response);
480 }
481
482 /* set up our bulk in urb */
483 usb_fill_bulk_urb(port->read_urb, serial->dev,
484 usb_rcvbulkpipe(serial->dev,
485 port->bulk_in_endpointAddress),
486 port->bulk_in_buffer,
487 port->read_urb->transfer_buffer_length,
488 mos7720_bulk_in_callback, mos7720_port);
489 response = usb_submit_urb(port->read_urb, GFP_KERNEL);
490 if (response)
491 dev_err(&port->dev, "%s - Error %d submitting read urb\n",
492 __func__, response);
493
494 /* initialize our icount structure */
495 memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
496
497 /* initialize our port settings */
498 mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */
499
500 /* send a open port command */
501 mos7720_port->open = 1;
502
503 return 0;
504 }
505
506 /*
507 * mos7720_chars_in_buffer
508 * this function is called by the tty driver when it wants to know how many
509 * bytes of data we currently have outstanding in the port (data that has
510 * been written, but hasn't made it out the port yet)
511 * If successful, we return the number of bytes left to be written in the
512 * system,
513 * Otherwise we return a negative error number.
514 */
515 static int mos7720_chars_in_buffer(struct tty_struct *tty)
516 {
517 struct usb_serial_port *port = tty->driver_data;
518 int i;
519 int chars = 0;
520 struct moschip_port *mos7720_port;
521
522 dbg("%s:entering ...........", __func__);
523
524 mos7720_port = usb_get_serial_port_data(port);
525 if (mos7720_port == NULL) {
526 dbg("%s:leaving ...........", __func__);
527 return -ENODEV;
528 }
529
530 for (i = 0; i < NUM_URBS; ++i) {
531 if (mos7720_port->write_urb_pool[i] &&
532 mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
533 chars += URB_TRANSFER_BUFFER_SIZE;
534 }
535 dbg("%s - returns %d", __func__, chars);
536 return chars;
537 }
538
539 static void mos7720_close(struct tty_struct *tty,
540 struct usb_serial_port *port, struct file *filp)
541 {
542 struct usb_serial *serial;
543 struct moschip_port *mos7720_port;
544 char data;
545 int j;
546
547 dbg("mos7720_close:entering...");
548
549 serial = port->serial;
550
551 mos7720_port = usb_get_serial_port_data(port);
552 if (mos7720_port == NULL)
553 return;
554
555 for (j = 0; j < NUM_URBS; ++j)
556 usb_kill_urb(mos7720_port->write_urb_pool[j]);
557
558 /* Freeing Write URBs */
559 for (j = 0; j < NUM_URBS; ++j) {
560 if (mos7720_port->write_urb_pool[j]) {
561 kfree(mos7720_port->write_urb_pool[j]->transfer_buffer);
562 usb_free_urb(mos7720_port->write_urb_pool[j]);
563 }
564 }
565
566 /* While closing port, shutdown all bulk read, write *
567 * and interrupt read if they exists, otherwise nop */
568 dbg("Shutdown bulk write");
569 usb_kill_urb(port->write_urb);
570 dbg("Shutdown bulk read");
571 usb_kill_urb(port->read_urb);
572
573 mutex_lock(&serial->disc_mutex);
574 /* these commands must not be issued if the device has
575 * been disconnected */
576 if (!serial->disconnected) {
577 data = 0x00;
578 send_mos_cmd(serial, MOS_WRITE,
579 port->number - port->serial->minor, 0x04, &data);
580
581 data = 0x00;
582 send_mos_cmd(serial, MOS_WRITE,
583 port->number - port->serial->minor, 0x01, &data);
584 }
585 mutex_unlock(&serial->disc_mutex);
586 mos7720_port->open = 0;
587
588 dbg("Leaving %s", __func__);
589 }
590
591 static void mos7720_break(struct tty_struct *tty, int break_state)
592 {
593 struct usb_serial_port *port = tty->driver_data;
594 unsigned char data;
595 struct usb_serial *serial;
596 struct moschip_port *mos7720_port;
597
598 dbg("Entering %s", __func__);
599
600 serial = port->serial;
601
602 mos7720_port = usb_get_serial_port_data(port);
603 if (mos7720_port == NULL)
604 return;
605
606 if (break_state == -1)
607 data = mos7720_port->shadowLCR | UART_LCR_SBC;
608 else
609 data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
610
611 mos7720_port->shadowLCR = data;
612 send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
613 0x03, &data);
614
615 return;
616 }
617
618 /*
619 * mos7720_write_room
620 * this function is called by the tty driver when it wants to know how many
621 * bytes of data we can accept for a specific port.
622 * If successful, we return the amount of room that we have for this port
623 * Otherwise we return a negative error number.
624 */
625 static int mos7720_write_room(struct tty_struct *tty)
626 {
627 struct usb_serial_port *port = tty->driver_data;
628 struct moschip_port *mos7720_port;
629 int room = 0;
630 int i;
631
632 dbg("%s:entering ...........", __func__);
633
634 mos7720_port = usb_get_serial_port_data(port);
635 if (mos7720_port == NULL) {
636 dbg("%s:leaving ...........", __func__);
637 return -ENODEV;
638 }
639
640 /* FIXME: Locking */
641 for (i = 0; i < NUM_URBS; ++i) {
642 if (mos7720_port->write_urb_pool[i] &&
643 mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
644 room += URB_TRANSFER_BUFFER_SIZE;
645 }
646
647 dbg("%s - returns %d", __func__, room);
648 return room;
649 }
650
651 static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
652 const unsigned char *data, int count)
653 {
654 int status;
655 int i;
656 int bytes_sent = 0;
657 int transfer_size;
658
659 struct moschip_port *mos7720_port;
660 struct usb_serial *serial;
661 struct urb *urb;
662 const unsigned char *current_position = data;
663
664 dbg("%s:entering ...........", __func__);
665
666 serial = port->serial;
667
668 mos7720_port = usb_get_serial_port_data(port);
669 if (mos7720_port == NULL) {
670 dbg("mos7720_port is NULL");
671 return -ENODEV;
672 }
673
674 /* try to find a free urb in the list */
675 urb = NULL;
676
677 for (i = 0; i < NUM_URBS; ++i) {
678 if (mos7720_port->write_urb_pool[i] &&
679 mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
680 urb = mos7720_port->write_urb_pool[i];
681 dbg("URB:%d", i);
682 break;
683 }
684 }
685
686 if (urb == NULL) {
687 dbg("%s - no more free urbs", __func__);
688 goto exit;
689 }
690
691 if (urb->transfer_buffer == NULL) {
692 urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
693 GFP_KERNEL);
694 if (urb->transfer_buffer == NULL) {
695 err("%s no more kernel memory...", __func__);
696 goto exit;
697 }
698 }
699 transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
700
701 memcpy(urb->transfer_buffer, current_position, transfer_size);
702 usb_serial_debug_data(debug, &port->dev, __func__, transfer_size,
703 urb->transfer_buffer);
704
705 /* fill urb with data and submit */
706 usb_fill_bulk_urb(urb, serial->dev,
707 usb_sndbulkpipe(serial->dev,
708 port->bulk_out_endpointAddress),
709 urb->transfer_buffer, transfer_size,
710 mos7720_bulk_out_data_callback, mos7720_port);
711
712 /* send it down the pipe */
713 status = usb_submit_urb(urb, GFP_ATOMIC);
714 if (status) {
715 err("%s - usb_submit_urb(write bulk) failed with status = %d",
716 __func__, status);
717 bytes_sent = status;
718 goto exit;
719 }
720 bytes_sent = transfer_size;
721
722 exit:
723 return bytes_sent;
724 }
725
726 static void mos7720_throttle(struct tty_struct *tty)
727 {
728 struct usb_serial_port *port = tty->driver_data;
729 struct moschip_port *mos7720_port;
730 int status;
731
732 dbg("%s- port %d\n", __func__, port->number);
733
734 mos7720_port = usb_get_serial_port_data(port);
735
736 if (mos7720_port == NULL)
737 return;
738
739 if (!mos7720_port->open) {
740 dbg("port not opened");
741 return;
742 }
743
744 dbg("%s: Entering ..........", __func__);
745
746 /* if we are implementing XON/XOFF, send the stop character */
747 if (I_IXOFF(tty)) {
748 unsigned char stop_char = STOP_CHAR(tty);
749 status = mos7720_write(tty, port, &stop_char, 1);
750 if (status <= 0)
751 return;
752 }
753
754 /* if we are implementing RTS/CTS, toggle that line */
755 if (tty->termios->c_cflag & CRTSCTS) {
756 mos7720_port->shadowMCR &= ~UART_MCR_RTS;
757 status = send_mos_cmd(port->serial, MOS_WRITE,
758 port->number - port->serial->minor,
759 UART_MCR, &mos7720_port->shadowMCR);
760 if (status != 0)
761 return;
762 }
763 }
764
765 static void mos7720_unthrottle(struct tty_struct *tty)
766 {
767 struct usb_serial_port *port = tty->driver_data;
768 struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
769 int status;
770
771 if (mos7720_port == NULL)
772 return;
773
774 if (!mos7720_port->open) {
775 dbg("%s - port not opened", __func__);
776 return;
777 }
778
779 dbg("%s: Entering ..........", __func__);
780
781 /* if we are implementing XON/XOFF, send the start character */
782 if (I_IXOFF(tty)) {
783 unsigned char start_char = START_CHAR(tty);
784 status = mos7720_write(tty, port, &start_char, 1);
785 if (status <= 0)
786 return;
787 }
788
789 /* if we are implementing RTS/CTS, toggle that line */
790 if (tty->termios->c_cflag & CRTSCTS) {
791 mos7720_port->shadowMCR |= UART_MCR_RTS;
792 status = send_mos_cmd(port->serial, MOS_WRITE,
793 port->number - port->serial->minor,
794 UART_MCR, &mos7720_port->shadowMCR);
795 if (status != 0)
796 return;
797 }
798 }
799
800 static int set_higher_rates(struct moschip_port *mos7720_port,
801 unsigned int baud)
802 {
803 unsigned char data;
804 struct usb_serial_port *port;
805 struct usb_serial *serial;
806 int port_number;
807
808 if (mos7720_port == NULL)
809 return -EINVAL;
810
811 port = mos7720_port->port;
812 serial = port->serial;
813
814 /***********************************************
815 * Init Sequence for higher rates
816 ***********************************************/
817 dbg("Sending Setting Commands ..........");
818 port_number = port->number - port->serial->minor;
819
820 data = 0x000;
821 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
822 data = 0x000;
823 send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
824 data = 0x0CF;
825 send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
826 data = 0x00b;
827 mos7720_port->shadowMCR = data;
828 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
829 data = 0x00b;
830 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
831
832 data = 0x000;
833 send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
834 data = 0x000;
835 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
836
837
838 /***********************************************
839 * Set for higher rates *
840 ***********************************************/
841
842 data = baud * 0x10;
843 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
844
845 data = 0x003;
846 send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
847 data = 0x003;
848 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
849
850 data = 0x02b;
851 mos7720_port->shadowMCR = data;
852 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
853 data = 0x02b;
854 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
855
856 /***********************************************
857 * Set DLL/DLM
858 ***********************************************/
859
860 data = mos7720_port->shadowLCR | UART_LCR_DLAB;
861 mos7720_port->shadowLCR = data;
862 send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
863
864 data = 0x001; /* DLL */
865 send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
866 data = 0x000; /* DLM */
867 send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
868
869 data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
870 mos7720_port->shadowLCR = data;
871 send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
872
873 return 0;
874 }
875
876 /* baud rate information */
877 struct divisor_table_entry {
878 __u32 baudrate;
879 __u16 divisor;
880 };
881
882 /* Define table of divisors for moschip 7720 hardware *
883 * These assume a 3.6864MHz crystal, the standard /16, and *
884 * MCR.7 = 0. */
885 static struct divisor_table_entry divisor_table[] = {
886 { 50, 2304},
887 { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */
888 { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */
889 { 150, 768},
890 { 300, 384},
891 { 600, 192},
892 { 1200, 96},
893 { 1800, 64},
894 { 2400, 48},
895 { 4800, 24},
896 { 7200, 16},
897 { 9600, 12},
898 { 19200, 6},
899 { 38400, 3},
900 { 57600, 2},
901 { 115200, 1},
902 };
903
904 /*****************************************************************************
905 * calc_baud_rate_divisor
906 * this function calculates the proper baud rate divisor for the specified
907 * baud rate.
908 *****************************************************************************/
909 static int calc_baud_rate_divisor(int baudrate, int *divisor)
910 {
911 int i;
912 __u16 custom;
913 __u16 round1;
914 __u16 round;
915
916
917 dbg("%s - %d", __func__, baudrate);
918
919 for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
920 if (divisor_table[i].baudrate == baudrate) {
921 *divisor = divisor_table[i].divisor;
922 return 0;
923 }
924 }
925
926 /* After trying for all the standard baud rates *
927 * Try calculating the divisor for this baud rate */
928 if (baudrate > 75 && baudrate < 230400) {
929 /* get the divisor */
930 custom = (__u16)(230400L / baudrate);
931
932 /* Check for round off */
933 round1 = (__u16)(2304000L / baudrate);
934 round = (__u16)(round1 - (custom * 10));
935 if (round > 4)
936 custom++;
937 *divisor = custom;
938
939 dbg("Baud %d = %d", baudrate, custom);
940 return 0;
941 }
942
943 dbg("Baud calculation Failed...");
944 return -EINVAL;
945 }
946
947 /*
948 * send_cmd_write_baud_rate
949 * this function sends the proper command to change the baud rate of the
950 * specified port.
951 */
952 static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
953 int baudrate)
954 {
955 struct usb_serial_port *port;
956 struct usb_serial *serial;
957 int divisor;
958 int status;
959 unsigned char data;
960 unsigned char number;
961
962 if (mos7720_port == NULL)
963 return -1;
964
965 port = mos7720_port->port;
966 serial = port->serial;
967
968 dbg("%s: Entering ..........", __func__);
969
970 number = port->number - port->serial->minor;
971 dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate);
972
973 /* Calculate the Divisor */
974 status = calc_baud_rate_divisor(baudrate, &divisor);
975 if (status) {
976 err("%s - bad baud rate", __func__);
977 return status;
978 }
979
980 /* Enable access to divisor latch */
981 data = mos7720_port->shadowLCR | UART_LCR_DLAB;
982 mos7720_port->shadowLCR = data;
983 send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
984
985 /* Write the divisor */
986 data = ((unsigned char)(divisor & 0xff));
987 send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
988
989 data = ((unsigned char)((divisor & 0xff00) >> 8));
990 send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
991
992 /* Disable access to divisor latch */
993 data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
994 mos7720_port->shadowLCR = data;
995 send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
996
997 return status;
998 }
999
1000 /*
1001 * change_port_settings
1002 * This routine is called to set the UART on the device to match
1003 * the specified new settings.
1004 */
1005 static void change_port_settings(struct tty_struct *tty,
1006 struct moschip_port *mos7720_port,
1007 struct ktermios *old_termios)
1008 {
1009 struct usb_serial_port *port;
1010 struct usb_serial *serial;
1011 int baud;
1012 unsigned cflag;
1013 unsigned iflag;
1014 __u8 mask = 0xff;
1015 __u8 lData;
1016 __u8 lParity;
1017 __u8 lStop;
1018 int status;
1019 int port_number;
1020 char data;
1021
1022 if (mos7720_port == NULL)
1023 return ;
1024
1025 port = mos7720_port->port;
1026 serial = port->serial;
1027 port_number = port->number - port->serial->minor;
1028
1029 dbg("%s - port %d", __func__, port->number);
1030
1031 if (!mos7720_port->open) {
1032 dbg("%s - port not opened", __func__);
1033 return;
1034 }
1035
1036 dbg("%s: Entering ..........", __func__);
1037
1038 lData = UART_LCR_WLEN8;
1039 lStop = 0x00; /* 1 stop bit */
1040 lParity = 0x00; /* No parity */
1041
1042 cflag = tty->termios->c_cflag;
1043 iflag = tty->termios->c_iflag;
1044
1045 /* Change the number of bits */
1046 switch (cflag & CSIZE) {
1047 case CS5:
1048 lData = UART_LCR_WLEN5;
1049 mask = 0x1f;
1050 break;
1051
1052 case CS6:
1053 lData = UART_LCR_WLEN6;
1054 mask = 0x3f;
1055 break;
1056
1057 case CS7:
1058 lData = UART_LCR_WLEN7;
1059 mask = 0x7f;
1060 break;
1061 default:
1062 case CS8:
1063 lData = UART_LCR_WLEN8;
1064 break;
1065 }
1066
1067 /* Change the Parity bit */
1068 if (cflag & PARENB) {
1069 if (cflag & PARODD) {
1070 lParity = UART_LCR_PARITY;
1071 dbg("%s - parity = odd", __func__);
1072 } else {
1073 lParity = (UART_LCR_EPAR | UART_LCR_PARITY);
1074 dbg("%s - parity = even", __func__);
1075 }
1076
1077 } else {
1078 dbg("%s - parity = none", __func__);
1079 }
1080
1081 if (cflag & CMSPAR)
1082 lParity = lParity | 0x20;
1083
1084 /* Change the Stop bit */
1085 if (cflag & CSTOPB) {
1086 lStop = UART_LCR_STOP;
1087 dbg("%s - stop bits = 2", __func__);
1088 } else {
1089 lStop = 0x00;
1090 dbg("%s - stop bits = 1", __func__);
1091 }
1092
1093 #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
1094 #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
1095 #define LCR_PAR_MASK 0x38 /* Mask for parity field */
1096
1097 /* Update the LCR with the correct value */
1098 mos7720_port->shadowLCR &=
1099 ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
1100 mos7720_port->shadowLCR |= (lData | lParity | lStop);
1101
1102
1103 /* Disable Interrupts */
1104 data = 0x00;
1105 send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
1106 UART_IER, &data);
1107
1108 data = 0x00;
1109 send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
1110
1111 data = 0xcf;
1112 send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
1113
1114 /* Send the updated LCR value to the mos7720 */
1115 data = mos7720_port->shadowLCR;
1116 send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
1117
1118 data = 0x00b;
1119 mos7720_port->shadowMCR = data;
1120 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
1121 data = 0x00b;
1122 send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
1123
1124 /* set up the MCR register and send it to the mos7720 */
1125 mos7720_port->shadowMCR = UART_MCR_OUT2;
1126 if (cflag & CBAUD)
1127 mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS);
1128
1129 if (cflag & CRTSCTS) {
1130 mos7720_port->shadowMCR |= (UART_MCR_XONANY);
1131 /* To set hardware flow control to the specified *
1132 * serial port, in SP1/2_CONTROL_REG */
1133 if (port->number) {
1134 data = 0x001;
1135 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
1136 0x08, &data);
1137 } else {
1138 data = 0x002;
1139 send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
1140 0x08, &data);
1141 }
1142 } else {
1143 mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
1144 }
1145
1146 data = mos7720_port->shadowMCR;
1147 send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data);
1148
1149 /* Determine divisor based on baud rate */
1150 baud = tty_get_baud_rate(tty);
1151 if (!baud) {
1152 /* pick a default, any default... */
1153 dbg("Picked default baud...");
1154 baud = 9600;
1155 }
1156
1157 if (baud >= 230400) {
1158 set_higher_rates(mos7720_port, baud);
1159 /* Enable Interrupts */
1160 data = 0x0c;
1161 send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
1162 return;
1163 }
1164
1165 dbg("%s - baud rate = %d", __func__, baud);
1166 status = send_cmd_write_baud_rate(mos7720_port, baud);
1167 /* FIXME: needs to write actual resulting baud back not just
1168 blindly do so */
1169 if (cflag & CBAUD)
1170 tty_encode_baud_rate(tty, baud, baud);
1171 /* Enable Interrupts */
1172 data = 0x0c;
1173 send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
1174
1175 if (port->read_urb->status != -EINPROGRESS) {
1176 port->read_urb->dev = serial->dev;
1177
1178 status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
1179 if (status)
1180 dbg("usb_submit_urb(read bulk) failed, status = %d",
1181 status);
1182 }
1183 return;
1184 }
1185
1186 /*
1187 * mos7720_set_termios
1188 * this function is called by the tty driver when it wants to change the
1189 * termios structure.
1190 */
1191 static void mos7720_set_termios(struct tty_struct *tty,
1192 struct usb_serial_port *port, struct ktermios *old_termios)
1193 {
1194 int status;
1195 unsigned int cflag;
1196 struct usb_serial *serial;
1197 struct moschip_port *mos7720_port;
1198
1199 serial = port->serial;
1200
1201 mos7720_port = usb_get_serial_port_data(port);
1202
1203 if (mos7720_port == NULL)
1204 return;
1205
1206 if (!mos7720_port->open) {
1207 dbg("%s - port not opened", __func__);
1208 return;
1209 }
1210
1211 dbg("%s\n", "setting termios - ASPIRE");
1212
1213 cflag = tty->termios->c_cflag;
1214
1215 dbg("%s - cflag %08x iflag %08x", __func__,
1216 tty->termios->c_cflag,
1217 RELEVANT_IFLAG(tty->termios->c_iflag));
1218
1219 dbg("%s - old cflag %08x old iflag %08x", __func__,
1220 old_termios->c_cflag,
1221 RELEVANT_IFLAG(old_termios->c_iflag));
1222
1223 dbg("%s - port %d", __func__, port->number);
1224
1225 /* change the port settings to the new ones specified */
1226 change_port_settings(tty, mos7720_port, old_termios);
1227
1228 if (!port->read_urb) {
1229 dbg("%s", "URB KILLED !!!!!\n");
1230 return;
1231 }
1232
1233 if (port->read_urb->status != -EINPROGRESS) {
1234 port->read_urb->dev = serial->dev;
1235 status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
1236 if (status)
1237 dbg("usb_submit_urb(read bulk) failed, status = %d",
1238 status);
1239 }
1240 return;
1241 }
1242
1243 /*
1244 * get_lsr_info - get line status register info
1245 *
1246 * Purpose: Let user call ioctl() to get info when the UART physically
1247 * is emptied. On bus types like RS485, the transmitter must
1248 * release the bus after transmitting. This must be done when
1249 * the transmit shift register is empty, not be done when the
1250 * transmit holding register is empty. This functionality
1251 * allows an RS485 driver to be written in user space.
1252 */
1253 static int get_lsr_info(struct tty_struct *tty,
1254 struct moschip_port *mos7720_port, unsigned int __user *value)
1255 {
1256 int count;
1257 unsigned int result = 0;
1258
1259 count = mos7720_chars_in_buffer(tty);
1260 if (count == 0) {
1261 dbg("%s -- Empty", __func__);
1262 result = TIOCSER_TEMT;
1263 }
1264
1265 if (copy_to_user(value, &result, sizeof(int)))
1266 return -EFAULT;
1267 return 0;
1268 }
1269
1270 /*
1271 * get_number_bytes_avail - get number of bytes available
1272 *
1273 * Purpose: Let user call ioctl to get the count of number of bytes available.
1274 */
1275 static int get_number_bytes_avail(struct moschip_port *mos7720_port,
1276 unsigned int __user *value)
1277 {
1278 unsigned int result = 0;
1279 struct tty_struct *tty = mos7720_port->port->port.tty;
1280
1281 if (!tty)
1282 return -ENOIOCTLCMD;
1283
1284 result = tty->read_cnt;
1285
1286 dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
1287 if (copy_to_user(value, &result, sizeof(int)))
1288 return -EFAULT;
1289
1290 return -ENOIOCTLCMD;
1291 }
1292
1293 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
1294 unsigned int __user *value)
1295 {
1296 unsigned int mcr ;
1297 unsigned int arg;
1298 unsigned char data;
1299
1300 struct usb_serial_port *port;
1301
1302 if (mos7720_port == NULL)
1303 return -1;
1304
1305 port = (struct usb_serial_port *)mos7720_port->port;
1306 mcr = mos7720_port->shadowMCR;
1307
1308 if (copy_from_user(&arg, value, sizeof(int)))
1309 return -EFAULT;
1310
1311 switch (cmd) {
1312 case TIOCMBIS:
1313 if (arg & TIOCM_RTS)
1314 mcr |= UART_MCR_RTS;
1315 if (arg & TIOCM_DTR)
1316 mcr |= UART_MCR_RTS;
1317 if (arg & TIOCM_LOOP)
1318 mcr |= UART_MCR_LOOP;
1319 break;
1320
1321 case TIOCMBIC:
1322 if (arg & TIOCM_RTS)
1323 mcr &= ~UART_MCR_RTS;
1324 if (arg & TIOCM_DTR)
1325 mcr &= ~UART_MCR_RTS;
1326 if (arg & TIOCM_LOOP)
1327 mcr &= ~UART_MCR_LOOP;
1328 break;
1329
1330 case TIOCMSET:
1331 /* turn off the RTS and DTR and LOOPBACK
1332 * and then only turn on what was asked to */
1333 mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP);
1334 mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0);
1335 mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0);
1336 mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0);
1337 break;
1338 }
1339
1340 mos7720_port->shadowMCR = mcr;
1341
1342 data = mos7720_port->shadowMCR;
1343 send_mos_cmd(port->serial, MOS_WRITE,
1344 port->number - port->serial->minor, UART_MCR, &data);
1345
1346 return 0;
1347 }
1348
1349 static int get_modem_info(struct moschip_port *mos7720_port,
1350 unsigned int __user *value)
1351 {
1352 unsigned int result = 0;
1353 unsigned int msr = mos7720_port->shadowMSR;
1354 unsigned int mcr = mos7720_port->shadowMCR;
1355
1356 result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
1357 | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
1358 | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
1359 | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */
1360 | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
1361 | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
1362
1363
1364 dbg("%s -- %x", __func__, result);
1365
1366 if (copy_to_user(value, &result, sizeof(int)))
1367 return -EFAULT;
1368 return 0;
1369 }
1370
1371 static int get_serial_info(struct moschip_port *mos7720_port,
1372 struct serial_struct __user *retinfo)
1373 {
1374 struct serial_struct tmp;
1375
1376 if (!retinfo)
1377 return -EFAULT;
1378
1379 memset(&tmp, 0, sizeof(tmp));
1380
1381 tmp.type = PORT_16550A;
1382 tmp.line = mos7720_port->port->serial->minor;
1383 tmp.port = mos7720_port->port->number;
1384 tmp.irq = 0;
1385 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
1386 tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
1387 tmp.baud_base = 9600;
1388 tmp.close_delay = 5*HZ;
1389 tmp.closing_wait = 30*HZ;
1390
1391 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1392 return -EFAULT;
1393 return 0;
1394 }
1395
1396 static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
1397 unsigned int cmd, unsigned long arg)
1398 {
1399 struct usb_serial_port *port = tty->driver_data;
1400 struct moschip_port *mos7720_port;
1401 struct async_icount cnow;
1402 struct async_icount cprev;
1403 struct serial_icounter_struct icount;
1404
1405 mos7720_port = usb_get_serial_port_data(port);
1406 if (mos7720_port == NULL)
1407 return -ENODEV;
1408
1409 dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
1410
1411 switch (cmd) {
1412 case TIOCINQ:
1413 /* return number of bytes available */
1414 dbg("%s (%d) TIOCINQ", __func__, port->number);
1415 return get_number_bytes_avail(mos7720_port,
1416 (unsigned int __user *)arg);
1417 break;
1418
1419 case TIOCSERGETLSR:
1420 dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
1421 return get_lsr_info(tty, mos7720_port,
1422 (unsigned int __user *)arg);
1423 return 0;
1424
1425 /* FIXME: These should be using the mode methods */
1426 case TIOCMBIS:
1427 case TIOCMBIC:
1428 case TIOCMSET:
1429 dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
1430 __func__, port->number);
1431 return set_modem_info(mos7720_port, cmd,
1432 (unsigned int __user *)arg);
1433
1434 case TIOCMGET:
1435 dbg("%s (%d) TIOCMGET", __func__, port->number);
1436 return get_modem_info(mos7720_port,
1437 (unsigned int __user *)arg);
1438
1439 case TIOCGSERIAL:
1440 dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
1441 return get_serial_info(mos7720_port,
1442 (struct serial_struct __user *)arg);
1443
1444 case TIOCMIWAIT:
1445 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
1446 cprev = mos7720_port->icount;
1447 while (1) {
1448 if (signal_pending(current))
1449 return -ERESTARTSYS;
1450 cnow = mos7720_port->icount;
1451 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1452 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1453 return -EIO; /* no change => error */
1454 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1455 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1456 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
1457 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
1458 return 0;
1459 }
1460 cprev = cnow;
1461 }
1462 /* NOTREACHED */
1463 break;
1464
1465 case TIOCGICOUNT:
1466 cnow = mos7720_port->icount;
1467 icount.cts = cnow.cts;
1468 icount.dsr = cnow.dsr;
1469 icount.rng = cnow.rng;
1470 icount.dcd = cnow.dcd;
1471 icount.rx = cnow.rx;
1472 icount.tx = cnow.tx;
1473 icount.frame = cnow.frame;
1474 icount.overrun = cnow.overrun;
1475 icount.parity = cnow.parity;
1476 icount.brk = cnow.brk;
1477 icount.buf_overrun = cnow.buf_overrun;
1478
1479 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
1480 port->number, icount.rx, icount.tx);
1481 if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
1482 return -EFAULT;
1483 return 0;
1484 }
1485
1486 return -ENOIOCTLCMD;
1487 }
1488
1489 static int mos7720_startup(struct usb_serial *serial)
1490 {
1491 struct moschip_serial *mos7720_serial;
1492 struct moschip_port *mos7720_port;
1493 struct usb_device *dev;
1494 int i;
1495 char data;
1496
1497 dbg("%s: Entering ..........", __func__);
1498
1499 if (!serial) {
1500 dbg("Invalid Handler");
1501 return -ENODEV;
1502 }
1503
1504 dev = serial->dev;
1505
1506 /* create our private serial structure */
1507 mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
1508 if (mos7720_serial == NULL) {
1509 err("%s - Out of memory", __func__);
1510 return -ENOMEM;
1511 }
1512
1513 usb_set_serial_data(serial, mos7720_serial);
1514
1515 /* we set up the pointers to the endpoints in the mos7720_open *
1516 * function, as the structures aren't created yet. */
1517
1518 /* set up port private structures */
1519 for (i = 0; i < serial->num_ports; ++i) {
1520 mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
1521 if (mos7720_port == NULL) {
1522 err("%s - Out of memory", __func__);
1523 usb_set_serial_data(serial, NULL);
1524 kfree(mos7720_serial);
1525 return -ENOMEM;
1526 }
1527
1528 /* Initialize all port interrupt end point to port 0 int
1529 * endpoint. Our device has only one interrupt endpoint
1530 * comman to all ports */
1531 serial->port[i]->interrupt_in_endpointAddress =
1532 serial->port[0]->interrupt_in_endpointAddress;
1533
1534 mos7720_port->port = serial->port[i];
1535 usb_set_serial_port_data(serial->port[i], mos7720_port);
1536
1537 dbg("port number is %d", serial->port[i]->number);
1538 dbg("serial number is %d", serial->minor);
1539 }
1540
1541
1542 /* setting configuration feature to one */
1543 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
1544 (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
1545
1546 /* LSR For Port 1 */
1547 send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
1548 dbg("LSR:%x", data);
1549
1550 /* LSR For Port 2 */
1551 send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
1552 dbg("LSR:%x", data);
1553
1554 return 0;
1555 }
1556
1557 static void mos7720_shutdown(struct usb_serial *serial)
1558 {
1559 int i;
1560
1561 /* free private structure allocated for serial port */
1562 for (i = 0; i < serial->num_ports; ++i) {
1563 kfree(usb_get_serial_port_data(serial->port[i]));
1564 usb_set_serial_port_data(serial->port[i], NULL);
1565 }
1566
1567 /* free private structure allocated for serial device */
1568 kfree(usb_get_serial_data(serial));
1569 usb_set_serial_data(serial, NULL);
1570 }
1571
1572 static struct usb_driver usb_driver = {
1573 .name = "moschip7720",
1574 .probe = usb_serial_probe,
1575 .disconnect = usb_serial_disconnect,
1576 .id_table = moschip_port_id_table,
1577 .no_dynamic_id = 1,
1578 };
1579
1580 static struct usb_serial_driver moschip7720_2port_driver = {
1581 .driver = {
1582 .owner = THIS_MODULE,
1583 .name = "moschip7720",
1584 },
1585 .description = "Moschip 2 port adapter",
1586 .usb_driver = &usb_driver,
1587 .id_table = moschip_port_id_table,
1588 .num_ports = 2,
1589 .open = mos7720_open,
1590 .close = mos7720_close,
1591 .throttle = mos7720_throttle,
1592 .unthrottle = mos7720_unthrottle,
1593 .attach = mos7720_startup,
1594 .shutdown = mos7720_shutdown,
1595 .ioctl = mos7720_ioctl,
1596 .set_termios = mos7720_set_termios,
1597 .write = mos7720_write,
1598 .write_room = mos7720_write_room,
1599 .chars_in_buffer = mos7720_chars_in_buffer,
1600 .break_ctl = mos7720_break,
1601 .read_bulk_callback = mos7720_bulk_in_callback,
1602 .read_int_callback = mos7720_interrupt_callback,
1603 };
1604
1605 static int __init moschip7720_init(void)
1606 {
1607 int retval;
1608
1609 dbg("%s: Entering ..........", __func__);
1610
1611 /* Register with the usb serial */
1612 retval = usb_serial_register(&moschip7720_2port_driver);
1613 if (retval)
1614 goto failed_port_device_register;
1615
1616 info(DRIVER_DESC " " DRIVER_VERSION);
1617
1618 /* Register with the usb */
1619 retval = usb_register(&usb_driver);
1620 if (retval)
1621 goto failed_usb_register;
1622
1623 return 0;
1624
1625 failed_usb_register:
1626 usb_serial_deregister(&moschip7720_2port_driver);
1627
1628 failed_port_device_register:
1629 return retval;
1630 }
1631
1632 static void __exit moschip7720_exit(void)
1633 {
1634 usb_deregister(&usb_driver);
1635 usb_serial_deregister(&moschip7720_2port_driver);
1636 }
1637
1638 module_init(moschip7720_init);
1639 module_exit(moschip7720_exit);
1640
1641 /* Module information */
1642 MODULE_AUTHOR(DRIVER_AUTHOR);
1643 MODULE_DESCRIPTION(DRIVER_DESC);
1644 MODULE_LICENSE("GPL");
1645
1646 module_param(debug, bool, S_IRUGO | S_IWUSR);
1647 MODULE_PARM_DESC(debug, "Debug enabled or not");
Linux with added FPC-III support