2 * Aic94xx SAS/SATA driver access to shared data structures and memory
5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
8 * This file is licensed under GPLv2.
10 * This file is part of the aic94xx driver.
12 * The aic94xx driver is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; version 2 of the
17 * The aic94xx driver is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with the aic94xx driver; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
28 #include <linux/pci.h>
29 #include <linux/delay.h>
32 #include "aic94xx_reg.h"
33 #include "aic94xx_sds.h"
35 /* ---------- OCM stuff ---------- */
37 struct asd_ocm_dir_ent
{
42 } __attribute__ ((packed
));
51 struct asd_ocm_dir_ent entry
[15];
52 } __attribute__ ((packed
));
54 #define OCM_DE_OCM_DIR 0x00
55 #define OCM_DE_WIN_DRVR 0x01
56 #define OCM_DE_BIOS_CHIM 0x02
57 #define OCM_DE_RAID_ENGN 0x03
58 #define OCM_DE_BIOS_INTL 0x04
59 #define OCM_DE_BIOS_CHIM_OSM 0x05
60 #define OCM_DE_BIOS_CHIM_DYNAMIC 0x06
61 #define OCM_DE_ADDC2C_RES0 0x07
62 #define OCM_DE_ADDC2C_RES1 0x08
63 #define OCM_DE_ADDC2C_RES2 0x09
64 #define OCM_DE_ADDC2C_RES3 0x0A
66 #define OCM_INIT_DIR_ENTRIES 5
67 /***************************************************************************
68 * OCM directory default
69 ***************************************************************************/
70 static struct asd_ocm_dir OCMDirInit
=
72 .sig
= {0x4D, 0x4F}, /* signature */
73 .num_de
= OCM_INIT_DIR_ENTRIES
, /* no. of directory entries */
76 /***************************************************************************
77 * OCM directory Entries default
78 ***************************************************************************/
79 static struct asd_ocm_dir_ent OCMDirEntriesInit
[OCM_INIT_DIR_ENTRIES
] =
82 .type
= (OCM_DE_ADDC2C_RES0
), /* Entry type */
83 .offs
= {128}, /* Offset */
84 .size
= {0, 4}, /* size */
87 .type
= (OCM_DE_ADDC2C_RES1
), /* Entry type */
88 .offs
= {128, 4}, /* Offset */
89 .size
= {0, 4}, /* size */
92 .type
= (OCM_DE_ADDC2C_RES2
), /* Entry type */
93 .offs
= {128, 8}, /* Offset */
94 .size
= {0, 4}, /* size */
97 .type
= (OCM_DE_ADDC2C_RES3
), /* Entry type */
98 .offs
= {128, 12}, /* Offset */
99 .size
= {0, 4}, /* size */
102 .type
= (OCM_DE_WIN_DRVR
), /* Entry type */
103 .offs
= {128, 16}, /* Offset */
104 .size
= {128, 235, 1}, /* size */
108 struct asd_bios_chim_struct
{
120 /* The unit element array is right here.
122 } __attribute__ ((packed
));
125 * asd_read_ocm_seg - read an on chip memory (OCM) segment
126 * @asd_ha: pointer to the host adapter structure
127 * @buffer: where to write the read data
128 * @offs: offset into OCM where to read from
129 * @size: how many bytes to read
131 * Return the number of bytes not read. Return 0 on success.
133 static int asd_read_ocm_seg(struct asd_ha_struct
*asd_ha
, void *buffer
,
137 if (unlikely(asd_ha
->iospace
))
138 asd_read_reg_string(asd_ha
, buffer
, offs
+OCM_BASE_ADDR
, size
);
140 for ( ; size
> 0; size
--, offs
++, p
++)
141 *p
= asd_read_ocm_byte(asd_ha
, offs
);
146 static int asd_read_ocm_dir(struct asd_ha_struct
*asd_ha
,
147 struct asd_ocm_dir
*dir
, u32 offs
)
149 int err
= asd_read_ocm_seg(asd_ha
, dir
, offs
, sizeof(*dir
));
151 ASD_DPRINTK("couldn't read ocm segment\n");
155 if (dir
->sig
[0] != 'M' || dir
->sig
[1] != 'O') {
156 ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
157 dir
->sig
[0], dir
->sig
[1]);
160 if (dir
->major
!= 0) {
161 asd_printk("unsupported major version of ocm dir:0x%x\n",
170 * asd_write_ocm_seg - write an on chip memory (OCM) segment
171 * @asd_ha: pointer to the host adapter structure
172 * @buffer: where to read the write data
173 * @offs: offset into OCM to write to
174 * @size: how many bytes to write
176 * Return the number of bytes not written. Return 0 on success.
178 static void asd_write_ocm_seg(struct asd_ha_struct
*asd_ha
, void *buffer
,
182 if (unlikely(asd_ha
->iospace
))
183 asd_write_reg_string(asd_ha
, buffer
, offs
+OCM_BASE_ADDR
, size
);
185 for ( ; size
> 0; size
--, offs
++, p
++)
186 asd_write_ocm_byte(asd_ha
, offs
, *p
);
191 #define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
193 static int asd_find_dir_entry(struct asd_ocm_dir
*dir
, u8 type
,
194 u32
*offs
, u32
*size
)
197 struct asd_ocm_dir_ent
*ent
;
199 for (i
= 0; i
< dir
->num_de
; i
++) {
200 if (dir
->entry
[i
].type
== type
)
203 if (i
>= dir
->num_de
)
205 ent
= &dir
->entry
[i
];
206 *offs
= (u32
) THREE_TO_NUM(ent
->offs
);
207 *size
= (u32
) THREE_TO_NUM(ent
->size
);
211 #define OCM_BIOS_CHIM_DE 2
212 #define BC_BIOS_PRESENT 1
214 static int asd_get_bios_chim(struct asd_ha_struct
*asd_ha
,
215 struct asd_ocm_dir
*dir
)
218 struct asd_bios_chim_struct
*bc_struct
;
221 err
= asd_find_dir_entry(dir
, OCM_BIOS_CHIM_DE
, &offs
, &size
);
223 ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
227 bc_struct
= kmalloc(sizeof(*bc_struct
), GFP_KERNEL
);
229 asd_printk("no memory for bios_chim struct\n");
232 err
= asd_read_ocm_seg(asd_ha
, (void *)bc_struct
, offs
,
235 ASD_DPRINTK("couldn't read ocm segment\n");
238 if (strncmp(bc_struct
->sig
, "SOIB", 4)
239 && strncmp(bc_struct
->sig
, "IPSA", 4)) {
240 ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
241 bc_struct
->sig
[0], bc_struct
->sig
[1],
242 bc_struct
->sig
[2], bc_struct
->sig
[3]);
246 if (bc_struct
->major
!= 1) {
247 asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
252 if (bc_struct
->flags
& BC_BIOS_PRESENT
) {
253 asd_ha
->hw_prof
.bios
.present
= 1;
254 asd_ha
->hw_prof
.bios
.maj
= bc_struct
->bios_major
;
255 asd_ha
->hw_prof
.bios
.min
= bc_struct
->bios_minor
;
256 asd_ha
->hw_prof
.bios
.bld
= le32_to_cpu(bc_struct
->bios_build
);
257 ASD_DPRINTK("BIOS present (%d,%d), %d\n",
258 asd_ha
->hw_prof
.bios
.maj
,
259 asd_ha
->hw_prof
.bios
.min
,
260 asd_ha
->hw_prof
.bios
.bld
);
262 asd_ha
->hw_prof
.ue
.num
= le16_to_cpu(bc_struct
->ue_num
);
263 asd_ha
->hw_prof
.ue
.size
= le16_to_cpu(bc_struct
->ue_size
);
264 ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha
->hw_prof
.ue
.num
,
265 asd_ha
->hw_prof
.ue
.size
);
266 size
= asd_ha
->hw_prof
.ue
.num
* asd_ha
->hw_prof
.ue
.size
;
269 asd_ha
->hw_prof
.ue
.area
= kmalloc(size
, GFP_KERNEL
);
270 if (!asd_ha
->hw_prof
.ue
.area
)
272 err
= asd_read_ocm_seg(asd_ha
, (void *)asd_ha
->hw_prof
.ue
.area
,
273 offs
+ sizeof(*bc_struct
), size
);
275 kfree(asd_ha
->hw_prof
.ue
.area
);
276 asd_ha
->hw_prof
.ue
.area
= NULL
;
277 asd_ha
->hw_prof
.ue
.num
= 0;
278 asd_ha
->hw_prof
.ue
.size
= 0;
279 ASD_DPRINTK("couldn't read ue entries(%d)\n", err
);
289 asd_hwi_initialize_ocm_dir (struct asd_ha_struct
*asd_ha
)
294 for (i
= 0; i
< OCM_MAX_SIZE
; i
+= 4)
295 asd_write_ocm_dword(asd_ha
, i
, 0);
298 asd_write_ocm_seg(asd_ha
, &OCMDirInit
, 0,
299 sizeof(struct asd_ocm_dir
));
301 /* Write Dir Entries */
302 for (i
= 0; i
< OCM_INIT_DIR_ENTRIES
; i
++)
303 asd_write_ocm_seg(asd_ha
, &OCMDirEntriesInit
[i
],
304 sizeof(struct asd_ocm_dir
) +
305 (i
* sizeof(struct asd_ocm_dir_ent
))
306 , sizeof(struct asd_ocm_dir_ent
));
311 asd_hwi_check_ocm_access (struct asd_ha_struct
*asd_ha
)
313 struct pci_dev
*pcidev
= asd_ha
->pcidev
;
318 /* check if OCM has been initialized by BIOS */
319 reg
= asd_read_reg_dword(asd_ha
, EXSICNFGR
);
321 if (!(reg
& OCMINITIALIZED
)) {
322 err
= pci_read_config_dword(pcidev
, PCIC_INTRPT_STAT
, &v
);
324 asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n",
329 printk(KERN_INFO
"OCM is not initialized by BIOS,"
330 "reinitialize it and ignore it, current IntrptStatus"
334 err
= pci_write_config_dword(pcidev
,
335 PCIC_INTRPT_STAT
, v
);
337 asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n",
342 asd_hwi_initialize_ocm_dir(asd_ha
);
350 * asd_read_ocm - read on chip memory (OCM)
351 * @asd_ha: pointer to the host adapter structure
353 int asd_read_ocm(struct asd_ha_struct
*asd_ha
)
356 struct asd_ocm_dir
*dir
;
358 if (asd_hwi_check_ocm_access(asd_ha
))
361 dir
= kmalloc(sizeof(*dir
), GFP_KERNEL
);
363 asd_printk("no memory for ocm dir\n");
367 err
= asd_read_ocm_dir(asd_ha
, dir
, 0);
371 err
= asd_get_bios_chim(asd_ha
, dir
);
377 /* ---------- FLASH stuff ---------- */
379 #define FLASH_RESET 0xF0
381 #define ASD_FLASH_SIZE 0x200000
382 #define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** "
383 #define FLASH_NEXT_ENTRY_OFFS 0x2000
384 #define FLASH_MAX_DIR_ENTRIES 32
386 #define FLASH_DE_TYPE_MASK 0x3FFFFFFF
387 #define FLASH_DE_MS 0x120
388 #define FLASH_DE_CTRL_A_USER 0xE0
390 struct asd_flash_de
{
398 } __attribute__ ((packed
));
400 struct asd_flash_dir
{
404 __le32 chksum_antidote
;
406 u8 bld_id
[32]; /* build id data */
407 u8 ver_data
[32]; /* date and time of build */
412 struct asd_flash_de dir_entry
[FLASH_MAX_DIR_ENTRIES
];
413 } __attribute__ ((packed
));
415 struct asd_manuf_sec
{
416 char sig
[2]; /* 'S', 'M' */
423 u8 sas_addr
[SAS_ADDR_SIZE
];
424 u8 pcba_sn
[ASD_PCBA_SN_SIZE
];
425 /* Here start the other segments */
427 } __attribute__ ((packed
));
429 struct asd_manuf_phy_desc
{
430 u8 state
; /* low 4 bits */
431 #define MS_PHY_STATE_ENABLED 0
432 #define MS_PHY_STATE_REPORTED 1
433 #define MS_PHY_STATE_HIDDEN 2
436 u8 phy_control_0
; /* mode 5 reg 0x160 */
437 u8 phy_control_1
; /* mode 5 reg 0x161 */
438 u8 phy_control_2
; /* mode 5 reg 0x162 */
439 u8 phy_control_3
; /* mode 5 reg 0x163 */
440 } __attribute__ ((packed
));
442 struct asd_manuf_phy_param
{
443 char sig
[2]; /* 'P', 'M' */
447 u8 num_phy_desc
; /* 8 */
448 u8 phy_desc_size
; /* 8 */
452 struct asd_manuf_phy_desc phy_desc
[ASD_MAX_PHYS
];
453 } __attribute__ ((packed
));
456 static const char *asd_sb_type
[] = {
459 [2 ... 0x7F] = "unknown",
461 [0x81 ... 0xFF] = "VENDOR_UNIQUExx"
465 struct asd_ms_sb_desc
{
470 } __attribute__ ((packed
));
473 static const char *asd_conn_type
[] = {
474 [0 ... 7] = "unknown",
478 [0x80] = "PCIX_DAUGHTER0",
479 [0x81] = "SAS_DAUGHTER0",
480 [0x82 ... 0xFF] = "VENDOR_UNIQUExx"
483 static const char *asd_conn_location
[] = {
491 struct asd_ms_conn_desc
{
494 u8 num_sideband_desc
;
495 u8 size_sideband_desc
;
498 struct asd_ms_sb_desc sb_desc
[0];
499 } __attribute__ ((packed
));
501 struct asd_nd_phy_desc
{
503 u8 attch_specific
[0];
504 } __attribute__ ((packed
));
507 static const char *asd_node_type
[] = {
513 "MULTI_DROP_I2C_BUS",
517 struct asd_ms_node_desc
{
523 struct asd_nd_phy_desc phy_desc
[0];
524 } __attribute__ ((packed
));
526 struct asd_ms_conn_map
{
527 char sig
[2]; /* 'M', 'C' */
531 __le16 cm_size
; /* size of this struct */
537 struct asd_ms_conn_desc conn_desc
[0];
538 struct asd_ms_node_desc node_desc
[0];
539 } __attribute__ ((packed
));
541 struct asd_ctrla_phy_entry
{
542 u8 sas_addr
[SAS_ADDR_SIZE
];
543 u8 sas_link_rates
; /* max in hi bits, min in low bits */
547 } __attribute__ ((packed
));
549 struct asd_ctrla_phy_settings
{
553 u8 num_phys
; /* number of PHYs in the PCI function */
555 struct asd_ctrla_phy_entry phy_ent
[ASD_MAX_PHYS
];
556 } __attribute__ ((packed
));
562 u8 something_here
[0];
563 } __attribute__ ((packed
));
565 static int asd_poll_flash(struct asd_ha_struct
*asd_ha
)
570 for (c
= 5000; c
> 0; c
--) {
571 d
= asd_read_reg_byte(asd_ha
, asd_ha
->hw_prof
.flash
.bar
);
572 d
^= asd_read_reg_byte(asd_ha
, asd_ha
->hw_prof
.flash
.bar
);
580 static int asd_reset_flash(struct asd_ha_struct
*asd_ha
)
584 err
= asd_poll_flash(asd_ha
);
587 asd_write_reg_byte(asd_ha
, asd_ha
->hw_prof
.flash
.bar
, FLASH_RESET
);
588 err
= asd_poll_flash(asd_ha
);
593 static inline int asd_read_flash_seg(struct asd_ha_struct
*asd_ha
,
594 void *buffer
, u32 offs
, int size
)
596 asd_read_reg_string(asd_ha
, buffer
, asd_ha
->hw_prof
.flash
.bar
+offs
,
602 * asd_find_flash_dir - finds and reads the flash directory
603 * @asd_ha: pointer to the host adapter structure
604 * @flash_dir: pointer to flash directory structure
606 * If found, the flash directory segment will be copied to
607 * @flash_dir. Return 1 if found, 0 if not.
609 static int asd_find_flash_dir(struct asd_ha_struct
*asd_ha
,
610 struct asd_flash_dir
*flash_dir
)
613 for (v
= 0; v
< ASD_FLASH_SIZE
; v
+= FLASH_NEXT_ENTRY_OFFS
) {
614 asd_read_flash_seg(asd_ha
, flash_dir
, v
,
615 sizeof(FLASH_DIR_COOKIE
)-1);
616 if (memcmp(flash_dir
->cookie
, FLASH_DIR_COOKIE
,
617 sizeof(FLASH_DIR_COOKIE
)-1) == 0) {
618 asd_ha
->hw_prof
.flash
.dir_offs
= v
;
619 asd_read_flash_seg(asd_ha
, flash_dir
, v
,
627 static int asd_flash_getid(struct asd_ha_struct
*asd_ha
)
632 reg
= asd_read_reg_dword(asd_ha
, EXSICNFGR
);
634 if (pci_read_config_dword(asd_ha
->pcidev
, PCI_CONF_FLSH_BAR
,
635 &asd_ha
->hw_prof
.flash
.bar
)) {
636 asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
637 pci_name(asd_ha
->pcidev
));
640 asd_ha
->hw_prof
.flash
.present
= 1;
641 asd_ha
->hw_prof
.flash
.wide
= reg
& FLASHW
? 1 : 0;
642 err
= asd_reset_flash(asd_ha
);
644 ASD_DPRINTK("couldn't reset flash(%d)\n", err
);
650 static u16
asd_calc_flash_chksum(u16
*p
, int size
)
661 static int asd_find_flash_de(struct asd_flash_dir
*flash_dir
, u32 entry_type
,
662 u32
*offs
, u32
*size
)
665 struct asd_flash_de
*de
;
667 for (i
= 0; i
< FLASH_MAX_DIR_ENTRIES
; i
++) {
668 u32 type
= le32_to_cpu(flash_dir
->dir_entry
[i
].type
);
670 type
&= FLASH_DE_TYPE_MASK
;
671 if (type
== entry_type
)
674 if (i
>= FLASH_MAX_DIR_ENTRIES
)
676 de
= &flash_dir
->dir_entry
[i
];
677 *offs
= le32_to_cpu(de
->offs
);
678 *size
= le32_to_cpu(de
->pad_size
);
682 static int asd_validate_ms(struct asd_manuf_sec
*ms
)
684 if (ms
->sig
[0] != 'S' || ms
->sig
[1] != 'M') {
685 ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
686 ms
->sig
[0], ms
->sig
[1]);
690 asd_printk("unsupported manuf. sector. major version:%x\n",
694 ms
->offs_next
= le16_to_cpu((__force __le16
) ms
->offs_next
);
695 ms
->chksum
= le16_to_cpu((__force __le16
) ms
->chksum
);
696 ms
->size
= le16_to_cpu((__force __le16
) ms
->size
);
698 if (asd_calc_flash_chksum((u16
*)ms
, ms
->size
/2)) {
699 asd_printk("failed manuf sector checksum\n");
705 static int asd_ms_get_sas_addr(struct asd_ha_struct
*asd_ha
,
706 struct asd_manuf_sec
*ms
)
708 memcpy(asd_ha
->hw_prof
.sas_addr
, ms
->sas_addr
, SAS_ADDR_SIZE
);
712 static int asd_ms_get_pcba_sn(struct asd_ha_struct
*asd_ha
,
713 struct asd_manuf_sec
*ms
)
715 memcpy(asd_ha
->hw_prof
.pcba_sn
, ms
->pcba_sn
, ASD_PCBA_SN_SIZE
);
716 asd_ha
->hw_prof
.pcba_sn
[ASD_PCBA_SN_SIZE
] = '\0';
721 * asd_find_ll_by_id - find a linked list entry by its id
722 * @start: void pointer to the first element in the linked list
723 * @id0: the first byte of the id (offs 0)
724 * @id1: the second byte of the id (offs 1)
726 * @start has to be the _base_ element start, since the
727 * linked list entries's offset is from this pointer.
728 * Some linked list entries use only the first id, in which case
729 * you can pass 0xFF for the second.
731 static void *asd_find_ll_by_id(void * const start
, const u8 id0
, const u8 id1
)
733 struct asd_ll_el
*el
= start
;
743 el
= start
+ le16_to_cpu(el
->next
);
744 } while (el
!= start
);
750 * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
751 * @asd_ha: pointer to the host adapter structure
752 * @manuf_sec: pointer to the manufacturing sector
754 * The manufacturing sector contans also the linked list of sub-segments,
755 * since when it was read, its size was taken from the flash directory,
756 * not from the structure size.
758 * HIDDEN phys do not count in the total count. REPORTED phys cannot
759 * be enabled but are reported and counted towards the total.
760 * ENABLED phys are enabled by default and count towards the total.
761 * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
762 * merely specifies the number of phys the host adapter decided to
763 * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
764 * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENABLED.
765 * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
766 * are actually enabled (enabled by default, max number of phys
767 * enableable in this case).
769 static int asd_ms_get_phy_params(struct asd_ha_struct
*asd_ha
,
770 struct asd_manuf_sec
*manuf_sec
)
775 struct asd_manuf_phy_param
*phy_param
;
776 struct asd_manuf_phy_param dflt_phy_param
;
778 phy_param
= asd_find_ll_by_id(manuf_sec
, 'P', 'M');
780 ASD_DPRINTK("ms: no phy parameters found\n");
781 ASD_DPRINTK("ms: Creating default phy parameters\n");
782 dflt_phy_param
.sig
[0] = 'P';
783 dflt_phy_param
.sig
[1] = 'M';
784 dflt_phy_param
.maj
= 0;
785 dflt_phy_param
.min
= 2;
786 dflt_phy_param
.num_phy_desc
= 8;
787 dflt_phy_param
.phy_desc_size
= sizeof(struct asd_manuf_phy_desc
);
788 for (i
=0; i
< ASD_MAX_PHYS
; i
++) {
789 dflt_phy_param
.phy_desc
[i
].state
= 0;
790 dflt_phy_param
.phy_desc
[i
].phy_id
= i
;
791 dflt_phy_param
.phy_desc
[i
].phy_control_0
= 0xf6;
792 dflt_phy_param
.phy_desc
[i
].phy_control_1
= 0x10;
793 dflt_phy_param
.phy_desc
[i
].phy_control_2
= 0x43;
794 dflt_phy_param
.phy_desc
[i
].phy_control_3
= 0xeb;
797 phy_param
= &dflt_phy_param
;
801 if (phy_param
->maj
!= 0) {
802 asd_printk("unsupported manuf. phy param major version:0x%x\n",
807 ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param
->num_phy_desc
);
808 asd_ha
->hw_prof
.enabled_phys
= 0;
809 for (i
= 0; i
< phy_param
->num_phy_desc
; i
++) {
810 struct asd_manuf_phy_desc
*pd
= &phy_param
->phy_desc
[i
];
811 switch (pd
->state
& 0xF) {
812 case MS_PHY_STATE_HIDDEN
:
813 ASD_DPRINTK("ms: phy%d: HIDDEN\n", i
);
815 case MS_PHY_STATE_REPORTED
:
816 ASD_DPRINTK("ms: phy%d: REPORTED\n", i
);
817 asd_ha
->hw_prof
.enabled_phys
&= ~(1 << i
);
820 case MS_PHY_STATE_ENABLED
:
821 ASD_DPRINTK("ms: phy%d: ENABLED\n", i
);
822 asd_ha
->hw_prof
.enabled_phys
|= (1 << i
);
826 asd_ha
->hw_prof
.phy_desc
[i
].phy_control_0
= pd
->phy_control_0
;
827 asd_ha
->hw_prof
.phy_desc
[i
].phy_control_1
= pd
->phy_control_1
;
828 asd_ha
->hw_prof
.phy_desc
[i
].phy_control_2
= pd
->phy_control_2
;
829 asd_ha
->hw_prof
.phy_desc
[i
].phy_control_3
= pd
->phy_control_3
;
831 asd_ha
->hw_prof
.max_phys
= rep_phys
+ en_phys
;
832 asd_ha
->hw_prof
.num_phys
= en_phys
;
833 ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
834 asd_ha
->hw_prof
.max_phys
, asd_ha
->hw_prof
.num_phys
);
835 ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha
->hw_prof
.enabled_phys
);
839 static int asd_ms_get_connector_map(struct asd_ha_struct
*asd_ha
,
840 struct asd_manuf_sec
*manuf_sec
)
842 struct asd_ms_conn_map
*cm
;
844 cm
= asd_find_ll_by_id(manuf_sec
, 'M', 'C');
846 ASD_DPRINTK("ms: no connector map found\n");
851 ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
863 * asd_process_ms - find and extract information from the manufacturing sector
864 * @asd_ha: pointer to the host adapter structure
865 * @flash_dir: pointer to the flash directory
867 static int asd_process_ms(struct asd_ha_struct
*asd_ha
,
868 struct asd_flash_dir
*flash_dir
)
871 struct asd_manuf_sec
*manuf_sec
;
874 err
= asd_find_flash_de(flash_dir
, FLASH_DE_MS
, &offs
, &size
);
876 ASD_DPRINTK("Couldn't find the manuf. sector\n");
884 manuf_sec
= kmalloc(size
, GFP_KERNEL
);
886 ASD_DPRINTK("no mem for manuf sector\n");
890 err
= asd_read_flash_seg(asd_ha
, (void *)manuf_sec
, offs
, size
);
892 ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
897 err
= asd_validate_ms(manuf_sec
);
899 ASD_DPRINTK("couldn't validate manuf sector\n");
903 err
= asd_ms_get_sas_addr(asd_ha
, manuf_sec
);
905 ASD_DPRINTK("couldn't read the SAS_ADDR\n");
908 ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
909 SAS_ADDR(asd_ha
->hw_prof
.sas_addr
));
911 err
= asd_ms_get_pcba_sn(asd_ha
, manuf_sec
);
913 ASD_DPRINTK("couldn't read the PCBA SN\n");
916 ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha
->hw_prof
.pcba_sn
);
918 err
= asd_ms_get_phy_params(asd_ha
, manuf_sec
);
920 ASD_DPRINTK("ms: couldn't get phy parameters\n");
924 err
= asd_ms_get_connector_map(asd_ha
, manuf_sec
);
926 ASD_DPRINTK("ms: couldn't get connector map\n");
936 static int asd_process_ctrla_phy_settings(struct asd_ha_struct
*asd_ha
,
937 struct asd_ctrla_phy_settings
*ps
)
940 for (i
= 0; i
< ps
->num_phys
; i
++) {
941 struct asd_ctrla_phy_entry
*pe
= &ps
->phy_ent
[i
];
943 if (!PHY_ENABLED(asd_ha
, i
))
945 if (*(u64
*)pe
->sas_addr
== 0) {
946 asd_ha
->hw_prof
.enabled_phys
&= ~(1 << i
);
949 /* This is the SAS address which should be sent in IDENTIFY. */
950 memcpy(asd_ha
->hw_prof
.phy_desc
[i
].sas_addr
, pe
->sas_addr
,
952 asd_ha
->hw_prof
.phy_desc
[i
].max_sas_lrate
=
953 (pe
->sas_link_rates
& 0xF0) >> 4;
954 asd_ha
->hw_prof
.phy_desc
[i
].min_sas_lrate
=
955 (pe
->sas_link_rates
& 0x0F);
956 asd_ha
->hw_prof
.phy_desc
[i
].max_sata_lrate
=
957 (pe
->sata_link_rates
& 0xF0) >> 4;
958 asd_ha
->hw_prof
.phy_desc
[i
].min_sata_lrate
=
959 (pe
->sata_link_rates
& 0x0F);
960 asd_ha
->hw_prof
.phy_desc
[i
].flags
= pe
->flags
;
961 ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
962 " sata rate:0x%x-0x%x, flags:0x%x\n",
964 SAS_ADDR(asd_ha
->hw_prof
.phy_desc
[i
].sas_addr
),
965 asd_ha
->hw_prof
.phy_desc
[i
].max_sas_lrate
,
966 asd_ha
->hw_prof
.phy_desc
[i
].min_sas_lrate
,
967 asd_ha
->hw_prof
.phy_desc
[i
].max_sata_lrate
,
968 asd_ha
->hw_prof
.phy_desc
[i
].min_sata_lrate
,
969 asd_ha
->hw_prof
.phy_desc
[i
].flags
);
976 * asd_process_ctrl_a_user - process CTRL-A user settings
977 * @asd_ha: pointer to the host adapter structure
978 * @flash_dir: pointer to the flash directory
980 static int asd_process_ctrl_a_user(struct asd_ha_struct
*asd_ha
,
981 struct asd_flash_dir
*flash_dir
)
985 struct asd_ll_el
*el
;
986 struct asd_ctrla_phy_settings
*ps
;
987 struct asd_ctrla_phy_settings dflt_ps
;
989 err
= asd_find_flash_de(flash_dir
, FLASH_DE_CTRL_A_USER
, &offs
, &size
);
991 ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
992 ASD_DPRINTK("Creating default CTRL-A user settings section\n");
995 dflt_ps
.num_phys
= 8;
996 for (i
=0; i
< ASD_MAX_PHYS
; i
++) {
997 memcpy(dflt_ps
.phy_ent
[i
].sas_addr
,
998 asd_ha
->hw_prof
.sas_addr
, SAS_ADDR_SIZE
);
999 dflt_ps
.phy_ent
[i
].sas_link_rates
= 0x98;
1000 dflt_ps
.phy_ent
[i
].flags
= 0x0;
1001 dflt_ps
.phy_ent
[i
].sata_link_rates
= 0x0;
1004 size
= sizeof(struct asd_ctrla_phy_settings
);
1012 el
= kmalloc(size
, GFP_KERNEL
);
1014 ASD_DPRINTK("no mem for ctrla user settings section\n");
1018 err
= asd_read_flash_seg(asd_ha
, (void *)el
, offs
, size
);
1020 ASD_DPRINTK("couldn't read ctrla phy settings section\n");
1025 ps
= asd_find_ll_by_id(el
, 'h', 0xFF);
1027 ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
1031 err
= asd_process_ctrla_phy_settings(asd_ha
, ps
);
1033 ASD_DPRINTK("couldn't process ctrla phy settings\n");
1043 * asd_read_flash - read flash memory
1044 * @asd_ha: pointer to the host adapter structure
1046 int asd_read_flash(struct asd_ha_struct
*asd_ha
)
1049 struct asd_flash_dir
*flash_dir
;
1051 err
= asd_flash_getid(asd_ha
);
1055 flash_dir
= kmalloc(sizeof(*flash_dir
), GFP_KERNEL
);
1060 if (!asd_find_flash_dir(asd_ha
, flash_dir
)) {
1061 ASD_DPRINTK("couldn't find flash directory\n");
1065 if (le32_to_cpu(flash_dir
->rev
) != 2) {
1066 asd_printk("unsupported flash dir version:0x%x\n",
1067 le32_to_cpu(flash_dir
->rev
));
1071 err
= asd_process_ms(asd_ha
, flash_dir
);
1073 ASD_DPRINTK("couldn't process manuf sector settings\n");
1077 err
= asd_process_ctrl_a_user(asd_ha
, flash_dir
);
1079 ASD_DPRINTK("couldn't process CTRL-A user settings\n");
1089 * asd_verify_flash_seg - verify data with flash memory
1090 * @asd_ha: pointer to the host adapter structure
1091 * @src: pointer to the source data to be verified
1092 * @dest_offset: offset from flash memory
1093 * @bytes_to_verify: total bytes to verify
1095 int asd_verify_flash_seg(struct asd_ha_struct
*asd_ha
,
1096 void *src
, u32 dest_offset
, u32 bytes_to_verify
)
1101 u32 nv_offset
, reg
, i
;
1103 reg
= asd_ha
->hw_prof
.flash
.bar
;
1107 nv_offset
= dest_offset
;
1108 src_buf
= (u8
*)src
;
1109 for (i
= 0; i
< bytes_to_verify
; i
++) {
1110 flash_char
= asd_read_reg_byte(asd_ha
, reg
+ nv_offset
+ i
);
1111 if (flash_char
!= src_buf
[i
]) {
1120 * asd_write_flash_seg - write data into flash memory
1121 * @asd_ha: pointer to the host adapter structure
1122 * @src: pointer to the source data to be written
1123 * @dest_offset: offset from flash memory
1124 * @bytes_to_write: total bytes to write
1126 int asd_write_flash_seg(struct asd_ha_struct
*asd_ha
,
1127 void *src
, u32 dest_offset
, u32 bytes_to_write
)
1130 u32 nv_offset
, reg
, i
;
1133 reg
= asd_ha
->hw_prof
.flash
.bar
;
1136 err
= asd_check_flash_type(asd_ha
);
1138 ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err
);
1142 nv_offset
= dest_offset
;
1143 err
= asd_erase_nv_sector(asd_ha
, nv_offset
, bytes_to_write
);
1145 ASD_DPRINTK("Erase failed at offset:0x%x\n",
1150 err
= asd_reset_flash(asd_ha
);
1152 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1156 src_buf
= (u8
*)src
;
1157 for (i
= 0; i
< bytes_to_write
; i
++) {
1158 /* Setup program command sequence */
1159 switch (asd_ha
->hw_prof
.flash
.method
) {
1160 case FLASH_METHOD_A
:
1162 asd_write_reg_byte(asd_ha
,
1163 (reg
+ 0xAAA), 0xAA);
1164 asd_write_reg_byte(asd_ha
,
1165 (reg
+ 0x555), 0x55);
1166 asd_write_reg_byte(asd_ha
,
1167 (reg
+ 0xAAA), 0xA0);
1168 asd_write_reg_byte(asd_ha
,
1169 (reg
+ nv_offset
+ i
),
1173 case FLASH_METHOD_B
:
1175 asd_write_reg_byte(asd_ha
,
1176 (reg
+ 0x555), 0xAA);
1177 asd_write_reg_byte(asd_ha
,
1178 (reg
+ 0x2AA), 0x55);
1179 asd_write_reg_byte(asd_ha
,
1180 (reg
+ 0x555), 0xA0);
1181 asd_write_reg_byte(asd_ha
,
1182 (reg
+ nv_offset
+ i
),
1189 if (asd_chk_write_status(asd_ha
,
1190 (nv_offset
+ i
), 0) != 0) {
1191 ASD_DPRINTK("aicx: Write failed at offset:0x%x\n",
1192 reg
+ nv_offset
+ i
);
1193 return FAIL_WRITE_FLASH
;
1197 err
= asd_reset_flash(asd_ha
);
1199 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1205 int asd_chk_write_status(struct asd_ha_struct
*asd_ha
,
1206 u32 sector_addr
, u8 erase_flag
)
1210 u8 nv_data1
, nv_data2
;
1214 * Read from DQ2 requires sector address
1215 * while it's dont care for DQ6
1217 reg
= asd_ha
->hw_prof
.flash
.bar
;
1219 for (loop_cnt
= 0; loop_cnt
< 50000; loop_cnt
++) {
1220 nv_data1
= asd_read_reg_byte(asd_ha
, reg
);
1221 nv_data2
= asd_read_reg_byte(asd_ha
, reg
);
1223 toggle_bit1
= ((nv_data1
& FLASH_STATUS_BIT_MASK_DQ6
)
1224 ^ (nv_data2
& FLASH_STATUS_BIT_MASK_DQ6
));
1226 if (toggle_bit1
== 0) {
1229 if (nv_data2
& FLASH_STATUS_BIT_MASK_DQ5
) {
1230 nv_data1
= asd_read_reg_byte(asd_ha
,
1232 nv_data2
= asd_read_reg_byte(asd_ha
,
1235 ((nv_data1
& FLASH_STATUS_BIT_MASK_DQ6
)
1236 ^ (nv_data2
& FLASH_STATUS_BIT_MASK_DQ6
));
1238 if (toggle_bit1
== 0)
1244 * ERASE is a sector-by-sector operation and requires
1245 * more time to finish while WRITE is byte-byte-byte
1246 * operation and takes lesser time to finish.
1248 * For some strange reason a reduced ERASE delay gives different
1249 * behaviour across different spirit boards. Hence we set
1250 * a optimum balance of 50mus for ERASE which works well
1251 * across all boards.
1254 udelay(FLASH_STATUS_ERASE_DELAY_COUNT
);
1256 udelay(FLASH_STATUS_WRITE_DELAY_COUNT
);
1263 * asd_hwi_erase_nv_sector - Erase the flash memory sectors.
1264 * @asd_ha: pointer to the host adapter structure
1265 * @flash_addr: pointer to offset from flash memory
1266 * @size: total bytes to erase.
1268 int asd_erase_nv_sector(struct asd_ha_struct
*asd_ha
, u32 flash_addr
, u32 size
)
1273 reg
= asd_ha
->hw_prof
.flash
.bar
;
1275 /* sector staring address */
1276 sector_addr
= flash_addr
& FLASH_SECTOR_SIZE_MASK
;
1279 * Erasing an flash sector needs to be done in six consecutive
1282 while (sector_addr
< flash_addr
+size
) {
1283 switch (asd_ha
->hw_prof
.flash
.method
) {
1284 case FLASH_METHOD_A
:
1285 asd_write_reg_byte(asd_ha
, (reg
+ 0xAAA), 0xAA);
1286 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0x55);
1287 asd_write_reg_byte(asd_ha
, (reg
+ 0xAAA), 0x80);
1288 asd_write_reg_byte(asd_ha
, (reg
+ 0xAAA), 0xAA);
1289 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0x55);
1290 asd_write_reg_byte(asd_ha
, (reg
+ sector_addr
), 0x30);
1292 case FLASH_METHOD_B
:
1293 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0xAA);
1294 asd_write_reg_byte(asd_ha
, (reg
+ 0x2AA), 0x55);
1295 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0x80);
1296 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0xAA);
1297 asd_write_reg_byte(asd_ha
, (reg
+ 0x2AA), 0x55);
1298 asd_write_reg_byte(asd_ha
, (reg
+ sector_addr
), 0x30);
1304 if (asd_chk_write_status(asd_ha
, sector_addr
, 1) != 0)
1305 return FAIL_ERASE_FLASH
;
1307 sector_addr
+= FLASH_SECTOR_SIZE
;
1313 int asd_check_flash_type(struct asd_ha_struct
*asd_ha
)
1322 /* get Flash memory base address */
1323 reg
= asd_ha
->hw_prof
.flash
.bar
;
1325 /* Determine flash info */
1326 err
= asd_reset_flash(asd_ha
);
1328 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1332 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_UNKNOWN
;
1333 asd_ha
->hw_prof
.flash
.manuf
= FLASH_MANUF_ID_UNKNOWN
;
1334 asd_ha
->hw_prof
.flash
.dev_id
= FLASH_DEV_ID_UNKNOWN
;
1336 /* Get flash info. This would most likely be AMD Am29LV family flash.
1337 * First try the sequence for word mode. It is the same as for
1338 * 008B (byte mode only), 160B (word mode) and 800D (word mode).
1340 inc
= asd_ha
->hw_prof
.flash
.wide
? 2 : 1;
1341 asd_write_reg_byte(asd_ha
, reg
+ 0xAAA, 0xAA);
1342 asd_write_reg_byte(asd_ha
, reg
+ 0x555, 0x55);
1343 asd_write_reg_byte(asd_ha
, reg
+ 0xAAA, 0x90);
1344 manuf_id
= asd_read_reg_byte(asd_ha
, reg
);
1345 dev_id
= asd_read_reg_byte(asd_ha
, reg
+ inc
);
1346 sec_prot
= asd_read_reg_byte(asd_ha
, reg
+ inc
+ inc
);
1347 /* Get out of autoselect mode. */
1348 err
= asd_reset_flash(asd_ha
);
1350 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1353 ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) "
1354 "sec_prot(0x%x)\n", manuf_id
, dev_id
, sec_prot
);
1355 err
= asd_reset_flash(asd_ha
);
1360 case FLASH_MANUF_ID_AMD
:
1362 case FLASH_DEV_ID_AM29LV800DT
:
1363 case FLASH_DEV_ID_AM29LV640MT
:
1364 case FLASH_DEV_ID_AM29F800B
:
1365 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_A
;
1371 case FLASH_MANUF_ID_ST
:
1373 case FLASH_DEV_ID_STM29W800DT
:
1374 case FLASH_DEV_ID_STM29LV640
:
1375 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_A
;
1381 case FLASH_MANUF_ID_FUJITSU
:
1383 case FLASH_DEV_ID_MBM29LV800TE
:
1384 case FLASH_DEV_ID_MBM29DL800TA
:
1385 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_A
;
1389 case FLASH_MANUF_ID_MACRONIX
:
1391 case FLASH_DEV_ID_MX29LV800BT
:
1392 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_A
;
1398 if (asd_ha
->hw_prof
.flash
.method
== FLASH_METHOD_UNKNOWN
) {
1399 err
= asd_reset_flash(asd_ha
);
1401 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1405 /* Issue Unlock sequence for AM29LV008BT */
1406 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0xAA);
1407 asd_write_reg_byte(asd_ha
, (reg
+ 0x2AA), 0x55);
1408 asd_write_reg_byte(asd_ha
, (reg
+ 0x555), 0x90);
1409 manuf_id
= asd_read_reg_byte(asd_ha
, reg
);
1410 dev_id
= asd_read_reg_byte(asd_ha
, reg
+ inc
);
1411 sec_prot
= asd_read_reg_byte(asd_ha
, reg
+ inc
+ inc
);
1413 ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot"
1414 "(0x%x)\n", manuf_id
, dev_id
, sec_prot
);
1416 err
= asd_reset_flash(asd_ha
);
1418 ASD_DPRINTK("couldn't reset flash. err=%d\n", err
);
1423 case FLASH_MANUF_ID_AMD
:
1425 case FLASH_DEV_ID_AM29LV008BT
:
1426 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_B
;
1432 case FLASH_MANUF_ID_ST
:
1434 case FLASH_DEV_ID_STM29008
:
1435 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_B
;
1441 case FLASH_MANUF_ID_FUJITSU
:
1443 case FLASH_DEV_ID_MBM29LV008TA
:
1444 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_B
;
1448 case FLASH_MANUF_ID_INTEL
:
1450 case FLASH_DEV_ID_I28LV00TAT
:
1451 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_B
;
1455 case FLASH_MANUF_ID_MACRONIX
:
1457 case FLASH_DEV_ID_I28LV00TAT
:
1458 asd_ha
->hw_prof
.flash
.method
= FLASH_METHOD_B
;
1463 return FAIL_FIND_FLASH_ID
;
1467 if (asd_ha
->hw_prof
.flash
.method
== FLASH_METHOD_UNKNOWN
)
1468 return FAIL_FIND_FLASH_ID
;
1470 asd_ha
->hw_prof
.flash
.manuf
= manuf_id
;
1471 asd_ha
->hw_prof
.flash
.dev_id
= dev_id
;
1472 asd_ha
->hw_prof
.flash
.sec_prot
= sec_prot
;