pinctrl: make a copy of pinmux map
[linux/fpc-iii.git] / arch / powerpc / platforms / powernv / smp.c
blobe877366852439e915a63047c3f459e7bf2d0cfed
1 /*
2 * SMP support for PowerNV machines.
4 * Copyright 2011 IBM Corp.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/sched.h>
15 #include <linux/smp.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/init.h>
19 #include <linux/spinlock.h>
20 #include <linux/cpu.h>
22 #include <asm/irq.h>
23 #include <asm/smp.h>
24 #include <asm/paca.h>
25 #include <asm/machdep.h>
26 #include <asm/cputable.h>
27 #include <asm/firmware.h>
28 #include <asm/system.h>
29 #include <asm/rtas.h>
30 #include <asm/vdso_datapage.h>
31 #include <asm/cputhreads.h>
32 #include <asm/xics.h>
33 #include <asm/opal.h>
35 #include "powernv.h"
37 #ifdef DEBUG
38 #include <asm/udbg.h>
39 #define DBG(fmt...) udbg_printf(fmt)
40 #else
41 #define DBG(fmt...)
42 #endif
44 static void __cpuinit pnv_smp_setup_cpu(int cpu)
46 if (cpu != boot_cpuid)
47 xics_setup_cpu();
50 static int pnv_smp_cpu_bootable(unsigned int nr)
52 /* Special case - we inhibit secondary thread startup
53 * during boot if the user requests it.
55 if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
56 if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
57 return 0;
58 if (smt_enabled_at_boot
59 && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
60 return 0;
63 return 1;
66 int __devinit pnv_smp_kick_cpu(int nr)
68 unsigned int pcpu = get_hard_smp_processor_id(nr);
69 unsigned long start_here = __pa(*((unsigned long *)
70 generic_secondary_smp_init));
71 long rc;
73 BUG_ON(nr < 0 || nr >= NR_CPUS);
75 /* On OPAL v2 the CPU are still spinning inside OPAL itself,
76 * get them back now
78 if (firmware_has_feature(FW_FEATURE_OPALv2)) {
79 pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
80 rc = opal_start_cpu(pcpu, start_here);
81 if (rc != OPAL_SUCCESS)
82 pr_warn("OPAL Error %ld starting CPU %d\n",
83 rc, nr);
85 return smp_generic_kick_cpu(nr);
88 #ifdef CONFIG_HOTPLUG_CPU
90 static int pnv_smp_cpu_disable(void)
92 int cpu = smp_processor_id();
94 /* This is identical to pSeries... might consolidate by
95 * moving migrate_irqs_away to a ppc_md with default to
96 * the generic fixup_irqs. --BenH.
98 set_cpu_online(cpu, false);
99 vdso_data->processorCount--;
100 if (cpu == boot_cpuid)
101 boot_cpuid = cpumask_any(cpu_online_mask);
102 xics_migrate_irqs_away();
103 return 0;
106 static void pnv_smp_cpu_kill_self(void)
108 unsigned int cpu;
110 /* If powersave_nap is enabled, use NAP mode, else just
111 * spin aimlessly
113 if (!powersave_nap) {
114 generic_mach_cpu_die();
115 return;
118 /* Standard hot unplug procedure */
119 local_irq_disable();
120 idle_task_exit();
121 current->active_mm = NULL; /* for sanity */
122 cpu = smp_processor_id();
123 DBG("CPU%d offline\n", cpu);
124 generic_set_cpu_dead(cpu);
125 smp_wmb();
127 /* We don't want to take decrementer interrupts while we are offline,
128 * so clear LPCR:PECE1. We keep PECE2 enabled.
130 mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
131 while (!generic_check_cpu_restart(cpu)) {
132 power7_idle();
133 if (!generic_check_cpu_restart(cpu)) {
134 DBG("CPU%d Unexpected exit while offline !\n", cpu);
135 /* We may be getting an IPI, so we re-enable
136 * interrupts to process it, it will be ignored
137 * since we aren't online (hopefully)
139 local_irq_enable();
140 local_irq_disable();
143 mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
144 DBG("CPU%d coming online...\n", cpu);
147 #endif /* CONFIG_HOTPLUG_CPU */
149 static struct smp_ops_t pnv_smp_ops = {
150 .message_pass = smp_muxed_ipi_message_pass,
151 .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */
152 .probe = xics_smp_probe,
153 .kick_cpu = pnv_smp_kick_cpu,
154 .setup_cpu = pnv_smp_setup_cpu,
155 .cpu_bootable = pnv_smp_cpu_bootable,
156 #ifdef CONFIG_HOTPLUG_CPU
157 .cpu_disable = pnv_smp_cpu_disable,
158 .cpu_die = generic_cpu_die,
159 #endif /* CONFIG_HOTPLUG_CPU */
162 /* This is called very early during platform setup_arch */
163 void __init pnv_smp_init(void)
165 smp_ops = &pnv_smp_ops;
167 /* XXX We don't yet have a proper entry point from HAL, for
168 * now we rely on kexec-style entry from BML
171 #ifdef CONFIG_PPC_RTAS
172 /* Non-lpar has additional take/give timebase */
173 if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
174 smp_ops->give_timebase = rtas_give_timebase;
175 smp_ops->take_timebase = rtas_take_timebase;
177 #endif /* CONFIG_PPC_RTAS */
179 #ifdef CONFIG_HOTPLUG_CPU
180 ppc_md.cpu_die = pnv_smp_cpu_kill_self;
181 #endif